Water pollution occurs from both point and non-point sources and can be physical, chemical, or biological in nature. It affects plants and organisms in bodies of water. Biotechnological control of water pollution uses aerobic and anaerobic treatment processes. Aerobic processes use microorganisms like Pseudomonas and algae to break down pollutants, and occur in suspended growth systems like activated sludge or attached growth systems like trickling filters. Anaerobic processes use microbes like Peptococcus anaerobus and Escherichia coli to treat waste in the absence of oxygen in digesters.
Hydrocarbon are major constituents of crude oil and petroleum. They can be biodegraded by naturally-occurring microorganisms in freshwater and marine environments under a variety of aerobic and anaerobic conditions. The ability of microorganisms - bacteria, archaea, fungi, or algae - to break down hydrocarbons is the basis for natural and enhanced bioremediation. To promote biodegradation, amendments such as nitrogen and phosphorous fertilizer are often added to stimulate microbial growth and metabolism
Hydrocarbon are major constituents of crude oil and petroleum. They can be biodegraded by naturally-occurring microorganisms in freshwater and marine environments under a variety of aerobic and anaerobic conditions. The ability of microorganisms - bacteria, archaea, fungi, or algae - to break down hydrocarbons is the basis for natural and enhanced bioremediation. To promote biodegradation, amendments such as nitrogen and phosphorous fertilizer are often added to stimulate microbial growth and metabolism
Bioremediation of heavy metals pollution by Udaykumar Pankajkumar BhanushaliUdayBhanushali111
Mechanisms and techniques used for Bioremediation which includes phytoremediation, Bacterial & fungal bioremediation. Examples of heavy metal pollution
•Introduction of bioremediation: Bioremediation refers to the process of using microorganisms to remove the environmental pollutants i.e. toxic wastes found in soil, water, air etc.
•In situ bioremediation:
It involves a direct approach for the microbial
degradation of xenobiotics at the sites of pollution
(soil, ground water).
•Types of in situ bioremediation:
Natural attenuation.
Engineered in situ bioremediation.
- Bioventing, biosparging, bioslurping,
phytoremediation.
•Ex situ bioremediation:
Waste or toxic pollutants can be collected from the polluted sites and bioremediation can be carried out at a designated place or site.
• Types of ex situ bioremediation
Land farming, windrow, biopiles, bioreactors.
•Microorganisms use in bioremediation:
A number of naturally occurring marine microbes
such as Pseudomonas sp. is capable of degrading oil and other hydrocarbons.
•Factors affecting bioremediation:
Nutrient availability, moisture content, pH, temperature, contaminant availability.
•References:
Satyanarayana U. Biotechnology. BOOKS AND ALLIED (P) Ltd.
Sharma P.D. Environmental Microbiology. RASTOGI PUBLICATIONS.
Gupta P.K. Biotechnology and Genomics. RASTOGI PUBLICATIONS.
Dubey R.C. A Textbook of Biotechnology. S Chand And Company Ltd.
Dubey R.C. A Textbook of Microbiology. S Chand And Company Ltd.
Willey/Sherwood/Woolverton. Prescott’s Microbiology. McGRAW-HILL INTERNATIONAL EDITION.
www.sciencedirect.com/bioremediation.
In his PPT you will come to know about the TREATMENT OF SOLID WASTE, ITS MANAGEMENT and MICROORGANISMS INVOLVED IN THE TREATMENT OF SOLID WASTE. do like, share and follow me to get more such PPT to be uploaded.
“Bioleaching" or "bio-oxidation" employs the use of naturally occurring bacteria, harmless to both humans and the environment, to extract of metals from their ores.
Conversion of insoluble metal sulfides into water-soluble metal sulfates.
It is mainly used to recover certain metals from sulfide ores. This is much cleaner than the traditional leaching.
Environmental Microbiology: Microbial degradation of recalcitrant compoundsTejaswini Petkar
A brief presentation on 'Microbial degradation of recalcitrant compounds'- their classes,their sources, the microorganisms involved and their modes of degradation,
"Remediate" means to solve a problem, and "bio-remediate" means to use biological organisms to solve an environmental problem such as contaminated soil or groundwater.
Bioremediation means to use a biological remedy to abate or clean up contamination.
According to the EPA, bioremediation is a “treatment that uses naturally occurring organisms to break down hazardous substances into less toxic or non toxic substances”.
Microbial enhanced oil recovery is one of the EOR techniques where bacteria and their by-products are utilized for oil mobilization in a reservoir.
It is the process that increases oil recovery through inoculation of microorganisms in a reservoir, aiming that bacteria and their by-products cause some beneficial effects.
Biosensors show the potential to complement laboratory-based analytical methods for
environmental applications. Although biosensors for potential environmental-monitoring
applications have been reported for a wide range of environmental pollutants, from a regulatory
perspective the decision to develop a biosensor method for an environmental application should
consider several interrelated issues. These issues are discussed in terms of the needs, policies,
and mechanisms associated with the identification and selection of appropriate monitoring
methods.
Bioremediation of wastewater by microorganismsadetunjiEwa
The term bioremediation has been introduced to describe the process of using biological
agents to remove toxic waste from environment. Bioremediation is the most effective management tool to manage the polluted water and recover contaminated waste water. It is an attractive and successful cleaning technique for polluted environment; it has been used at a number of sites worldwide, with varying degrees of success.
Bioremediation of heavy metals pollution by Udaykumar Pankajkumar BhanushaliUdayBhanushali111
Mechanisms and techniques used for Bioremediation which includes phytoremediation, Bacterial & fungal bioremediation. Examples of heavy metal pollution
•Introduction of bioremediation: Bioremediation refers to the process of using microorganisms to remove the environmental pollutants i.e. toxic wastes found in soil, water, air etc.
•In situ bioremediation:
It involves a direct approach for the microbial
degradation of xenobiotics at the sites of pollution
(soil, ground water).
•Types of in situ bioremediation:
Natural attenuation.
Engineered in situ bioremediation.
- Bioventing, biosparging, bioslurping,
phytoremediation.
•Ex situ bioremediation:
Waste or toxic pollutants can be collected from the polluted sites and bioremediation can be carried out at a designated place or site.
• Types of ex situ bioremediation
Land farming, windrow, biopiles, bioreactors.
•Microorganisms use in bioremediation:
A number of naturally occurring marine microbes
such as Pseudomonas sp. is capable of degrading oil and other hydrocarbons.
•Factors affecting bioremediation:
Nutrient availability, moisture content, pH, temperature, contaminant availability.
•References:
Satyanarayana U. Biotechnology. BOOKS AND ALLIED (P) Ltd.
Sharma P.D. Environmental Microbiology. RASTOGI PUBLICATIONS.
Gupta P.K. Biotechnology and Genomics. RASTOGI PUBLICATIONS.
Dubey R.C. A Textbook of Biotechnology. S Chand And Company Ltd.
Dubey R.C. A Textbook of Microbiology. S Chand And Company Ltd.
Willey/Sherwood/Woolverton. Prescott’s Microbiology. McGRAW-HILL INTERNATIONAL EDITION.
www.sciencedirect.com/bioremediation.
In his PPT you will come to know about the TREATMENT OF SOLID WASTE, ITS MANAGEMENT and MICROORGANISMS INVOLVED IN THE TREATMENT OF SOLID WASTE. do like, share and follow me to get more such PPT to be uploaded.
“Bioleaching" or "bio-oxidation" employs the use of naturally occurring bacteria, harmless to both humans and the environment, to extract of metals from their ores.
Conversion of insoluble metal sulfides into water-soluble metal sulfates.
It is mainly used to recover certain metals from sulfide ores. This is much cleaner than the traditional leaching.
Environmental Microbiology: Microbial degradation of recalcitrant compoundsTejaswini Petkar
A brief presentation on 'Microbial degradation of recalcitrant compounds'- their classes,their sources, the microorganisms involved and their modes of degradation,
"Remediate" means to solve a problem, and "bio-remediate" means to use biological organisms to solve an environmental problem such as contaminated soil or groundwater.
Bioremediation means to use a biological remedy to abate or clean up contamination.
According to the EPA, bioremediation is a “treatment that uses naturally occurring organisms to break down hazardous substances into less toxic or non toxic substances”.
Microbial enhanced oil recovery is one of the EOR techniques where bacteria and their by-products are utilized for oil mobilization in a reservoir.
It is the process that increases oil recovery through inoculation of microorganisms in a reservoir, aiming that bacteria and their by-products cause some beneficial effects.
Biosensors show the potential to complement laboratory-based analytical methods for
environmental applications. Although biosensors for potential environmental-monitoring
applications have been reported for a wide range of environmental pollutants, from a regulatory
perspective the decision to develop a biosensor method for an environmental application should
consider several interrelated issues. These issues are discussed in terms of the needs, policies,
and mechanisms associated with the identification and selection of appropriate monitoring
methods.
Bioremediation of wastewater by microorganismsadetunjiEwa
The term bioremediation has been introduced to describe the process of using biological
agents to remove toxic waste from environment. Bioremediation is the most effective management tool to manage the polluted water and recover contaminated waste water. It is an attractive and successful cleaning technique for polluted environment; it has been used at a number of sites worldwide, with varying degrees of success.
Bioremediation of wastewater by microorganismsadetunjiEwa
ABSTRACT
The term bioremediation has been introduced to describe the process of using biological
agents to remove toxic waste from environment. Bioremediation is the most effective management tool to manage the polluted water and recover contaminated waste water. It is an attractive and successful cleaning technique for polluted environment; it has been used at a number of sites worldwide, with varying degrees of success.
• Bioremediation – process of cleaning up environmental sites contaminated with chemical pollutants by using living organisms to degrade hazardous materials into less toxic substances
Biotechnology in Microbiology- includes the how microbial associations are worked out in secondary treatment techniques like activated sludge process, trickling filters, rotating biological contractors, composting, bioremediation etc.
here i have been given the detailed presentation on control of environmental pollution by using biotechnology/biologically, when i was studying Ph.D(Aquaculture) in Mangalore Fisheries College for 2 months!!!!!!
now i am doing Ph.D in Extension Dept. in Kolkata. I had my P.G in Extension only.
here i have been given the detailed presentation on control of environmental pollution by using biotechnology/biologically, when i was studying Ph.D(Aquaculture) in Mangalore Fisheries College for 2 months!!!!!!
now i am doing Ph.D in Extension Dept. in Kolkata. I had my P.G in Extension only.
Use of biotechnology in the treatment of municipal wastes and hazardousindust...Sijo A
Industrial waste water is a type of waste water produced by industrial activity, such as that of factories, mills and mines.
It is characterised by its large volume, high temperature, high concentration of biodegradable organic matter and suspended solids, high alkanity or acidity and by variations of flow.
The treatment of wastes by micro-organisms is called biological waste treatment.
Class switching is the process whereby an activated B cell changes its antibody production from IgM to either IgA, IgG, or IgE depending on the functional requirements. By the end of this CAL you should understand: the basic structure and function of an antibody.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
3. 3
INTRODUCTION :
Water pollution is the contamination of water bodies. Water
pollution affects plants and organisms living in these bodies of
water and the effect is damaging the natural biological
communities.
3
4. 4
SOURCESOF WATERPOLLUTION:-
Point source
Non–point sources
TYPESOF WATERPOLLUTION
Physical pollution
Chemical pollution
Biological pollution
Ground water pollution
Surface water pollution
(N.B. Singh and www.wikipedia.com
4
5. 5
EFFECTSOF WATER POLLUTION
Organic matter, heavy metals from industrial
processes are toxic to marine life such as fish and
shellfish, and subsequently to the humans who eat
them.
Microbial pollutants from sewage often result in
infectious diseases that infect aquatic life and
terrestrial life through drinking water.
Eutrophication.
5
6. 6
Control of water pollutionthrough biotechnology
Methods of waste water treatment (www.wikipedia.com) 6
7. 7
Biotechnological control of water pollution includes two process
Aerobic treatment e.g., Pseudomonas, Flavobacterium
& algae-chlorella.
Anaerobic treatment e.g., Peptococcus anaerobus,
Escherichia coli,
Methanobacterium,
Methanococcus
7
8. 8
Aerobictreatment:-
Aerobic process can be categorized in two types:-
i. Suspended growth system
Suspended growth system includes
Activated sludge
Oxidation ditches
Oxidation pond
8
9. 9
ii. Attached growth system
Attached growth system includes
Trickling filters
Rotating biological contactor
9
10. 10
i. Suspended growth system
Activated sludge treatment process:-
Fig:-Sludge treatment process
(www.wikipedia.com)
10
15. 15
When an oil spill occurs, some of the bacteria can use it as
new energy source and become the most numerous, there even
may be some evolution of other bacteria that allows recessive
oil eating ability to become more dominant. Some clean-up
experts like to dose the area to be treated with activated
sludge (concentrated bacterial colonies) from industrial waste
water treatment systems that have been treating oily waste.
Fig:- superbeg
(www.wikipedia.com)
15
16. 16
Anaerobic treatment:-
Anaerobic process is carried out in specially designed
reactors.
The treatment process consists of mixing of sewage with
recycled sludge solids and then digestion under anaerobic
conditions.
After the digestion is complete the supernatant effluent is
discharged and the settled sludge is recycled.
16(U. Satyanarayan)
17. 17
MICROBIOLOGY OF ANAEROBIC WASTE WATER
TREATMENT:
Fig:-Degradation of organic materials in anaerobic
digestion
17(U. Satyanarayan)
18. 18
It is also of two types:-
i. Attached growth system
Up flow anaerobic sludge blanket digestion
Anaerobic filter process
ii. Suspended growth system
Anaerobic contact Digester
Septic tank
Imhoff tank.
18(U. Satyanarayan)
19. 19
a. Attached growth process
Upflow anaerobic sludge blanket digestion (USAB)
Fig:-UASB reactor
(www.wikipedia.com)
19