• Lead a quality engineering team that supports all business units during component and finished device manufacturing transfers at suppliers around the world. • Assess legacy specifications for compliance and work with R&D to update any required changes. • Perform gap assessment, and facilitate gap closure with cross-functional team members, Enhance KPIs • Provide expert guidance in interpreting governmental regulations, agency guidelines and PHF internal policies in general and specific to transfers to assure compliance. • Understand all validation quality policy/system interfaces and dependencies between business partners and internal/external processes. • Oversee the completion of projects through the development and approval of validation schedules, project plans, master plans, validation protocols and reports for systems to support the validation plan. • Manages validation and qualification activities with Development, Manufacturing, and Engineering, Quality, Regulatory and other groups on projects. • Manages the activities of assigned SMEs and contract personnel to ensure the quality of completed work. • Provides technical assessment and approval for engineering and process changes. • Reviews and approves protocols, reports and data tables generated by subordinates and contract personnel. • Ensures solutions are consistent with organizational objectives. • Support, mentor, train and educate suppliers in planning and executing the validation processes, best practices • Support with metrics and reporting on critical aspects regarding the health of the overall project. • Support the development and implementation of validation procedures, best practices, and training/education programs. • Lead internal and external audits and inspections related to component and manufacturing transfers. • Provide continuous and rigorous assessment of activities and documentation to assure compliance with FDA regulations, ISO 13485, and Corporate Policy through the review of qualification and/or validation records at critical phases. • Uses full knowledge of cGMP, FDA CFR 820, Corporate Policy and industry best practices to ensure risk management, validation processes, acceptance and qualification processes, and documentation are efficient

1. Hamid Ali E-mail: h.hamidali@yahoo.com
Contact: 0092-3214273725
OBJECTIVE
Seeking for opportunity in progressive organization that possesses exclusive environment, competition, ample prospect of
adequate challenges where I can contribute best for the benefit of organization and get opportunities for professional
grooming, exposed to all types of work and enhance my managerial skills.
WORK EXPERIENCE (5+ YEARS)
1. From April 2015 to Present, Working as QA/QC Manager & Management Representative at Professional Hospital
Furnishers, Sialkot Pakistan
Professional brings the complete range of medical instruments solutions, including Orthopaedic, Cardiovascular, Dental,
Liposuction, Diagnostic, Eye, Colorectal and ENT.
 Lead a quality engineering team that supports all business units during component and finished device manufacturing
transfers at suppliers around the world.
 Assess legacy specifications for compliance and work with R&D to update any required changes.
 Perform gap assessment,and facilitate gap closure with cross-functional team members
 Provide expert guidance in interpreting governmental regulations, agency guidelines and PHF internal policies in general
and specific to transfers to assure compliance.
 Understand all validation quality policy/system interfaces and dependencies between business partners and
internal/external processes.
 Oversee the completion of projects through the development and approval of validation schedules, project plans, master
plans, validation protocols and reports for systems to support the validation plan.
 Manages validation and qualification activities with Development, Manufacturing, and Engineering, Quality, Regulatory
and other groups on projects.
 Manages the activities of assigned SMEs and contract personnel to ensure the quality of completed work.
 Provides technical assessment and approval for engineering and process changes.
 Reviews and approves protocols, reports and data tables generated by subordinates and contract personnel.
 Ensures solutions are consistent with organizational objectives.
 Support, mentor, train and educate suppliers in planning and executing the validation processes,best practices
 Support with metrics and reporting on critical aspects regarding the health of the overall project.
 Support the development and implementation of validation procedures, best practices, and training/education programs.
 Lead internal and external audits and inspections related to component and manufacturing transfers.
 Provide continuous and rigorous assessment of activities and documentation to assure compliance with FDA regulations,
ISO 13485, and Corporate Policy through the review of qualification and/or validation records at critical phases.
 Uses full knowledge of cGMP, FDA CFR 820, Corporate Policy and industry best practices to ensure risk management,
validation processes,acceptance and qualification processes,and documentation are efficient
Customers: Countries that Professional caters to include Brazil, Korea, Australia, Morocco, Japan, UK, Argentina, Syria,
Egypt and Iran, to name a few.
2. 2 years from 12 March 2013 to 18 March 2015, working as QA/QC Engineer at Kubota Saudi Arabia Company
(KSACO), Dammam Second Industrial City, Saudi Arabia.
Kubota is Heat and Corrosion Resistant, anti-coking special S.S Alloy Pipes and Coils assemblies producing and
manufacturing for Petrochemical, Refining, Fertilizing and Steel Industries, Kubota also provides its renowned Valves for
industrials applications
 Inspect and verify that the work execution and implementation are as per approved procedures, approved specifications and
approved drawings, Reviewing order inquiries to assess our ability to meet customer requirements
 Understand Method Statement, Project Specification, Material Selection, Failure Analysis, Root Cause Analysis, Micro
structural Analysis
 Conducting, assisting, and/or follow up of Internal/External audits, Raise the non-conformance reports (NCR) in case of
any discrepancy and sort out corrective and preventive actions (CAPA)
 ISO 9001-2008: Ensuring the effective implementation of Quality Management System standards & procedures
 Making ISO standard Work Instruction considering customer Requirement ( i.e. Reading Drawings and Specification) for
Quality Areas and Machines
 Laboratory activities, Follow up applicable NDT activities & Reviewing NDT reports (RT, UT, VT, PT, RT map),
Mechanical, Creep Rupture, Fatigue & Tensile Testing, Chemical composition controlling by Optical Emission
Spectrometer and XRF, Hydrostatic & Pneumatic Tests
 Strict follow-up of the implementation of approved Inspection Test Plan (ITP), Maintain and Manage Inspection
Procedures (PQR,WPS,WQT and PWHT) as per Company’s QMS.

2.  Prepare inspection reports as per Client’s needs, propose appropriate NDT method
 Cooperate with Third Party Inspectors like SGS, Intertek Moody for critical inspection of our Products.
 Risk Assessment,PDCA and Yosh,Perform Procurement activities, preparing monthly scrape ratio report
 Understand ISO Terms PD,WI, QM, FM, IMS, Quality Objectives for current year
 Corrosion and corrosion prevention methods, PR,RFQ, PO,CPO
 ASME Boilers and Pressure Vessels Codes, ASME sec VIII, Div 1,UW-51, ASME sec VIII, Div 1 Appendix 7, ASME E
446 Class 1 & Class 2, S3 of ASTM A608 (Stress Rupture Test), S7 of ASTM A608 (Macro etching Ring Test), A370 of
ASTM A608 (Tensile Test), ASTM E165 (Liquid Penetrant Test)
 Inspection and acceptance of incoming material and Mill test Certificate(MTC), physical witness, evidence and verification
of material and compliance of MTC as per ASTM, JIS, ASME, EN, BS, DIN,ISO standards and customer requirements.
 Maintain material identification and traceability of material used for all Projects in Warehouse as well as workshop as per
QC Manual-Material Identification and Traceability Procedure.
 Maintain the inspection status as Accepted,Hold or Rejected for Product at Inspection areas.
 Verification of Heat Number/Batch Number/Lot Number/Cast Number, Physical condition (any rust, pitting, distortion or
damage), dimensions (thickness, length, width and Schedule for Pipe) and markings on the material
 To perform and manage all the activities related to QA /QC management system with proper ISO standard of 9001:2008 at
site, Carry out Witness Inspections as per customer requirements, Effective application of document control procedures to
all ISO documents, assure all technical documents relative to site quality control are current status.
 Coordinate with the customers’ representative on all quality matters.
 Ensure that Safety is properly implemented at site, Make preparation for Management Review Meetings.
 Coordinate and chair the QA/QC site weekly meetings with the projects QC personnel.
 Review the Project scope of work and look after the Production and Quality activities as per applicable standards and
specifications, Update the welders Qualification and records,preparing the welding Summary sheets.
 Interpreting Codes / Standards / Specifications related to assigned jobs, to maintain welders / welding operator’s continuity
log and weekly/monthly/yearly repair rate. Daily login all the observations on the project execution in the logbook.
 To prepare and certification of Welding Procedure Specification (WPS) and conduct procedure Qualification test,To
maintain welders / welding operators continuity log.
 To review the MTRs of welding Consumables according to ASME Code and review the Lab test reports of Procedure
Qualification, Welder Qualification and welding Consumables.
 To ensure welding works are performed as per approved WPS and only qualified welders performed welding works.
Monitoring the Welding and Fabrication work as per drawings.
 Maintain calibration record of welding machines, electrode backing ovens and all inspection tools and equipments.
Implementing and completing the QA Activities and QC Plan.
 To communicate welding procedures, Protrusion, Reinforcement, temperature and all other necessary documents to
welding supervisors and welders/welding operators
 Supervise the Heat Treatment (PWHT) operation for our products from start to finish at Bilfal Heavy Industries Ltd Jubail,
KSA, also trained well to perform Procurement activities
CLIENTS AND PROJECTS
 Saudi International Petrochemical Company (Sipchem)
790 Sets of Reformer Pipes for Spare Furnace
 SADARA DOW-ARAMCO
Providing Pipes (16 Coils for GK6 and 32 Coils for SMK) for Liquid and Gas Cracking Furnaces
 JUBAIL UNITED PETROCHEMICAL COMPANY(JUPC), Providing 288 sets of S-Mert
 Eastern Petrochemical Co. (SHARQ).
 Ras Laffan Olefins Company (RLOC) - Qatar Petroleum
 Abu Dhabi Chemicals Company (BOROUGE), Pyrocrak 2-2 ANK coils
 Saudi-Yanbu Petrochemical Company (YANPET)
 SADAF – SABIC Project:Ethylene plant, 4 furnaces,16 radiant coils
 TASNEE Project Ethylene plant, 2 cracking furnaces,16 radiant coils.
 KEMYA- SABIC Project:Olefins plant, 2 cracking heater coils
 PETROKEMYA-SABIC Project:Ethylene plant, millisecond furnace, 800 MERT tubes
 PETRO RABIGH-ARAMCO Ethylene plant, cracking furnace,227 tubes
 Yanbu National Petrochemical Company ( YANSAB )Cracking Furnaces (Technip/40w Coils)
 Saudi Methanol Company (AR-RAZI) Steam Reformers Catalyst Support Stool 672 sets
 Saudi Arabia Chevron Phillips Chemical Company LLC. (S-Chem) ), Saudi Iron & Steel Company (HADEED) - SABIC, EQUATE
Petrochemical Company (EQUATE), Ibne-SinaPetrochemicalCo(IbneSina),QatarChemicalCompany (Q-Chem.)& HOSCO

3. 3. Around 3 years in Machine Crafts private Limited Shahdra, Lahore Pakistan as Assistant QA Manager
CLIENT: MILLATTRACTORS LIMITED: Millat Group
 Assigned the tasks of planning and directing activities related with Quality development
 ISO implementation, Gauges, Instruments Calibration , Understand CNC machines
 Production of Tractor Parts,Production of Defense Parts
 Working on Ferrous and Non Ferrous specially Steel, Cast Iron, Brass and Aluminium
 Welding and Fabrication of different Metals, storage tanks, Quality Controlling
 Working in Foundries, Production Management, Different Casting Techniques,
 Utilization of Spectrocast for checking Chemical Composition, Dies Repair and Maintenance etc.
 Application of different coatings on products to avoid Corrosion and erosion
 Resourceful in mobilizing equipment & labor, identifying vendors, suppliers, interfaces to achieve maintenance jobs
 Selection criterion of Raw Material,Knowledge of Materials as a Materials Engineer
 Rectification of Casting Defects,Induction Furnace and Cupola Melting Furnace
TRAININGS
 ISO 9001:2008 Quality Management System, ISO 14000:2004 Environment Safety
 OHSAS 18001:2007 Occupational Health and Safety Management System
 Got First Aid Certified Training course ,Got Training ofRisk Assessment
 Internship in Master Group ofIndustries , G.T Road Gujranwala, Pakistan
Non Ferrous Metals, Brass all kinds of Sanitary Products Production
 Internship in K-Axis Engineering Group, Defence, Lahore
 Internship as Trainee Engineer at Pakistan Railways Mughalpura, Lahore
 Internship at Star Agro Engineering and Foundry Bhagatpura, Lahore
Steel and Cast Iron Products, Sand Casting, Cupola and Induction Furnace.
INDUSTRIAL VISITS
Bilfal Heavy Industries Jubail KSA, Heavy Mechanical Complex, Oil and Gas Company limited, EMCO, Qadbros,
Pakistan Railways, Millat Equipment Limited MEL, Rastgar Foundry, Major Steel Mills, Chawla Aluminum, Newage
Cables, QSA Surgical Instruments, Tariq Glass Industry, Gunj Glass Industry
COURSE PROJECT
 Friction Stir Welding of Aluminium Alloy and Evaluation of their Mechanical and Physical Properties (Major)
 Design, Fabrication & Evaluation of pressure vessels, Inspection and Testing of different Materials
SUBJECTS OF MAJOR INTEREST
Quality Control/Quality Assurance, Inspection and Testing of Materials, Mechanical Metallurgy, Welding and Fabrication
Heat Treatment and Surface Engineering, Foundry/Steelmaking
COMPUTER SKILLS
Solid Edge, AutoCAD, C++, CorelDraw, Operating System Windows XP, 2007, Windows 8, Windows 10
MS Office (Excel, Word, Power Point), Internet Surfing, Smart Typing Speed
ACHIEVEMENTS
 Participation in the 1st
and 2nd
International Foundry Congress & Exhibition (IFCE), Participation in 1 day workshop on
'' Effective Communication Skills'', Participation in 1 day workshop on '' Inspirational Leadership''
 Registered Member of Pakistan Engineering Council (PEC) Metal/2527
 HEC Scholar, PEC Scholar, Got District Merit Scholarship, Top in 12th
Grade and 10th
Grade in District, Class
Representative till 12th
Grade, Founder of HSP,Got Dean’s Honour Roll Certificate in Graduation.
EDUCATION
 Bachelor of Science in Metallurgical & Materials Engineering from University of Engineering &Technology, Lahore,
Pakistan during 2006-2010 (77%)
PERSONEL DETAILS
Father
Name
Date of
Birth
NIC # Gender Passport # Passport
Expiry
Nationality Education
From
Saudi
Iqamah #
Languages
Safdar
Hussain
15 Feb,
1989
34301-
0986783-3
Male MK1807831 05 NOV
2022
Pakistani Pakistan 2352162776 English,
Arabic,
Urdu,
Punjabi,
Hindi