George Butler has over 23 years of experience in quality assurance, quality control, mechanical inspection, welding inspection, and non-destructive testing in the oil and gas industry. He has worked for major companies like Saudi Aramco, Murray & Roberts, and Alstom. Butler has extensive experience managing QA/QC teams and ensuring compliance with industry standards on large projects involving piping systems, power plants, and pipelines. He holds several international certifications in welding inspection and non-destructive testing.
POST APPLIED FOR
Any Mechanical / Oil & Gas/ Energy/ Power /Operations and maintenance, WWTP project or industry
• Mechanical Engineer/Supervisor
• QA/QC Engineer/Supervisor
• NDT supervisor
Operations and maintenance, Piping Fabrication, Construction, waste water plane, steel structure, Mechanical , Piping Materials or Plumbing Superintendant , supervisor or Engineer
ASME Code and Quality assurance for construction of nuclear facilitiesASME Co...Mark Mitchell
ASME Code and Quality assurance for construction of nuclear facilities
Mark N. Mitchell
Principal Engineer at Bufo Technology and
Member BPV Committee on Construction of Nuclear Facility Components (BPV III)
Nuclear Africa 2011
POST APPLIED FOR
Any Mechanical / Oil & Gas/ Energy/ Power /Operations and maintenance, WWTP project or industry
• Mechanical Engineer/Supervisor
• QA/QC Engineer/Supervisor
• NDT supervisor
Operations and maintenance, Piping Fabrication, Construction, waste water plane, steel structure, Mechanical , Piping Materials or Plumbing Superintendant , supervisor or Engineer
ASME Code and Quality assurance for construction of nuclear facilitiesASME Co...Mark Mitchell
ASME Code and Quality assurance for construction of nuclear facilities
Mark N. Mitchell
Principal Engineer at Bufo Technology and
Member BPV Committee on Construction of Nuclear Facility Components (BPV III)
Nuclear Africa 2011
Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Quality Control & Quality Assurance of MS pipelineIEI GSC
This presentation re. QC & QA of M S pipelines was made at Gujarat State Centre of the Institution of Engineers (India) at Ahmedabad by Er. Manoj Raghavan of SGS (India) Ltd.
Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Quality Control & Quality Assurance of MS pipelineIEI GSC
This presentation re. QC & QA of M S pipelines was made at Gujarat State Centre of the Institution of Engineers (India) at Ahmedabad by Er. Manoj Raghavan of SGS (India) Ltd.
2008 - Bedrijven als sprinkhanenplaag - Real Estate MagazineJacques Van Dinteren
De ideeën rond duurzame bedrijventerreinen hebben in het verleden vrij sterk gestalte gekregen langs de lijn van de ecologie. De maatschappelijke en economische invalshoeken mogen echter niet worden vergeten. Juist de gebrekkige aandacht voor grondkosten en investeringen in gebouwen (als economisch aspect) heeft geleid tot een weinig duurzaam gebruik van bedrijventerreinen.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
1. George Matthew Butler – CV
Profile
23 years of experience in the Quality Assurance, Quality Control, Mechanical Inspection, Welding
Inspection and Non-Destructive Testing fields in the Oil & Gas industry.
6 years of experience in the capacity of QA/QC Manager with Murray & Roberts and Saudi Aramco
Leadership skills of multi-discipline inspection engineers (civil, mechanical, electrical, instrumentation,
plumbing, HVAC and telecommunication).
Experience with major Oil & Gas projects including piping systems, power plants, pipelines and bulk
plants
Achieved several international certifications (CSWIP, AWS, ASNT…)
Fluent with MS Office applications (Word, Excel, PowerPoint...etc.)
ContactDetails:
E-Mail: georgebtlr@gmail.com
Mobile: +27 (0)82 903 1746 / +966 (0)56 523 7000
Qualifications:
CSWIP Senior Welding Inspector – 3.2.1 (Level 3), Cert. no. 1MBT/626801
IIW International Welding Inspector
Auditor/Lead Auditor ISO 9001:2000 Training Course
ASNT NDT Level II in Magnetic Particle Testing
ASNT NDT Level II in Dye Penetrant Testing
South African Institute of Welding, Welding/Fabrication Inspector (SAIW) – Level 1
Non-Destructive Testing / Radiographic Testing
Education:
1989 Middleburg Technical High School
Nature of Work and Responsibility:
Reviewing PQP, QCP, ITP, Method statement & other work procedures.
Inspecting the materials for traceability, physical condition and drawing requirements.
Reviewing WPS /PQR / Welder Qualification records.
Review and approve all project quality documents submitted by contractor
Witnessing Welding Procedure and Welder Qualification Tests including
Destructive tests
Review welder/welding operator certifications and issuance of JCC
Witnessing the NDT methods
Review, interpretation, evaluation of radiographs and coordinating with NDT crews
Review of radiographic films, PMI reports and hardness test reports
Witnessing Post Weld Heat Treatments and review of Charts
2. Preparing monthly / weekly progress report for onward submission to client & consultant.
Raising and resolving Non–Conformity reports
Thoroughly exposed in welding works involving SMAW, GTAW. Tie-in works and plant shutdown works
Review of hydrostatic test procedure and packages.
Witnessing of the hydro and pneumatic test
Daily co-ordination with project quality inspectors, contractors and sub-contractors
Coordinate with other discipline inspectors for the ongoing activities on daily basis
Coordinate with coating inspector for coating requirements
Blasting & coating inspection, holiday inspection for the underground and aboveground pipelines and
piping systems.
Test Packs Line Walk Down, Punch listing and clearance for testing
Coordination with the client during quality walkthrough.
Work Experience:
SaudiAramco (PID) from December 2013– Current.
Engineer II, Senior Inspector - Mechanical & Welding
Quality monitoring & Approval for all stages of construction and pre-commissioning up to final acceptance, to
ensure compliance with applicable standards and project specifications
Performing daily basis follow-up on all outstanding issue of project progress, safety, materials, submittals,
queries, quality, and punch list items
Conduct mechanical QA/QC inspection activities on pipes and equipment during, material verification at
vendor, fabrication shops and at construction site. This includes piping, welding NDT, Hydro tests, Hot-taps,
and Tie-ins
Conducting interviews for Contractors’ QA/QC mechanical inspectors
Reviewing technical quality procedures for all the required project activities
Conduct punch listing on the finished lines/segments and all related documents
Conducting and generating project exception items list
Review project specifications for welding processes, base metals, filler metals, heat treatment, and NDE
requirements
Select appropriate WPS, and if required, qualify a new WPS/PQR
Review order packages and advise the Quality Manager of potential materials, welding, heat treatment, or
NDE concerns
Witness/verify the welders’ qualification tests
Periodic reviews of Company welding practices, as related to codes, standards, and local regulations
Projects include – Refinery, Pipelines and API Tanks.
3 Pipe Line projects
01/09/2010 – 30/11/2013. Murray and Roberts Projects – Kusile Power Project.
Appointed as the Quality Control Manager for the fabrication and erection of 6 x 850MW Super Critical Coal Fire
Units at the Kusile Boiler Project.SA
Key Responsibilities:
3. Manage all QC activities
Manage all QC Personnel
Adhere to all procedures and specifications at all times
Training and guidance
Have total quality support and through put on the product delivered to the client.
Communication with top management
Capture of Welding Statistics
Reports on Welding and Line-up failures
Be familiar with the tools and equipment, and proficient in their use.
Ensure condition and calibration status of measuring equipment.
Ensure proper reporting of inspections to defined acceptance criteria.
Ensure timely and progressive compilation of quality dossier/data books.
01/08/2007 – 30/08/2010 Alstom John Thompson
(QC/QA Manager - Projects)
Was promoted to QA manager at Komati Power Station on the return to service contract 1st
August 2007.
Appointed as the Alstom Senior Management’s Representative who had the responsibility and authority for the
following:
Ensuring that processes needed for the quality management systems are established implemented and
maintained.
Reporting to management on the performance of the quality management system and any need for
improvement.
Ensuring the promotion of awareness of customer requirements throughout the division.
Liaising with external parties on matters relating to the company’s quality management system.
Authority to stop work where this is found in non-compliance with agreed codes, standard, procedures
and specifications.
1998-2007 Pro-Tec Boiler
QA/QC Supervisor at Komati PowerStation
Transport Manager
Inspection & NDT Inspector
Matimba Power Station (Economiser change project.)
Involved in all aspects of this project as follows:
Duties:
Pre-Fabrication Planning
Drawing up of QCP’s
Welder Qualifications
NDE requirements
Removal of the existing Economiser
Installation of new Economiser.
Inspections
Data Packages
Pressure Testing
Final Inspections and release
4. Fabrication of various pressure parts and vessels for various clients including Alstom Power.
Maintenance and repair work on various boilers throughout South Africa.
Inspections and detail surveys on boilers in Indonesia.
Komati Power Station - QA/QC Supervisor - 1st
May 2006
Responsibilities:
Monitoring Welder performance and conducting visual inspections of welds and repairs of welds in
accordance with company procedures and international codes of practice.
Check, inspect and test incoming welding materials.
Interviewing and selecting welders and verifying qualifications of welders for project requirements.
Coordinating with clients to undertake procedure qualification test and inspections of prepared test
specimens and witness destructive tests.
Identifying and preparing welding procedure specification (WPS) & PQR for jobs as per project
specifications.
Providing verification of electrodes baking and holding temperature including control and issue.
Undertaking workshop verification of welding machine and electrode baking and storage, to ensure
equipment meets job requirement specifications. Providing technical guidance for welding sequence and
distortion control.
Conducting fit up and dimension inspections as per inspection and test plan (I&TP) and review
radiography test films.
Conducting training of welders for new techniques and additional processes as per job requirements.
1996-1998 Unit Inspection (contract)
(NDT Technician / Welding Inspector)
Duties:
Magnetic Particle Inspection
Dye Penetrant Inspection
Radiographic Testing
Hardness Testing
Isometric Completion
Punching of Completed Lines
Witnessing of Pressure Tests
Genrec/Afrox pipeline – 86 kilometres long. This pipeline consisted of two 256mm OD piping that were fabricated
to ASME standards and carried Oxygen and Nitrogen respectively. I was completely involved on this project from
material procurement, trench specifications and inspections, welding, NDT, internal and external protection and
ground temperature recording, barometric pressure recording and final inspections with the client.
I was also a member of the “Inspection and Pressure Testing Specialist” group on this pipeline project.
Sites:
ENGEN
Sappi Saiccor
SAP Ref
GEN Ref
SASOL 2
SASAL 3
5. 1994-1996 Raysonics (Contract-NDT Technician)
Duties:
Magnetic Particle Inspection
Dye Penetrant Inspection
Radiographic Testing
Hardness Testing
Isometric Completion
Document Control
Punching of Completed Lines
Witnessing of Pressure Tests
Positive Material Identification
1993-1994 Barron Inspection Services (contract)
Fiz Breaker Project
Frazer’s & Chalmers – Engen
(NDT Technician)
Duties:
Magnetic Particle Inspection
Dye Penetrant Inspection
Radiographic Testing
Hardness Testing
Isometric Completion
Document Control
Punching of Completed Lines
Witnessing of Pressure Tests
1992-1993 Metsite (contract)
(NDT Technician)
Duties:
Magnetic Particle Inspection
Dye Penetrant Inspection
Radiographic Testing
Hardness Testing
1992-1993 Steinmuller Africa
(NDT Trainee & QA Technician)
Duties:
Magnetic particle Inspection
Dye Penetrant Inspection
Radiographic Testing
Hardness Testing
Isometric Completion
Document Control
Punching of completed lines