Mohammad Tanweer is applying for the position of E&I QA/QC Inspector/Supervisor. He has 14 years of experience in instrumentation for oil, gas, and petrochemical plants. His experience includes inspection, testing, commissioning, and maintenance. He is familiar with international engineering standards and protocols for instrumentation systems.

1. COVER LETTER
Mohammad Tanweer
E & I QA/QC Inspector/supervisor
Commissioning and maintenance
: +91 9920359261
: +91-9771357901
: tanweer_alam51@yahoo.com
: mohammadtanweer.alam1
Dear Sir,
Being given to understand that there is a vacancy for the post of E & I QA/QC INSPECTOR/SUPERVISOR* in your
esteemed organization. This opportunity is very interesting, and I believe that my strong technical experience and education
will make me a very competitive candidate for this position.
I have got 14 year’s’ experience in Oil & Gas (Brown field & Green field), especially in testing commissioning and
maintenance of construction and commissioning activities for Instrumentation. I have worked with an Oil & Gas,
Petrochemicals Desalination and fertilizer Industries. I am well versed with all the international engineering standards industries
codes & practices (NEC API,ISA,NEMA) ISO-9001, QCP & ITP. HART & FOUNDATION FEILDBUS Protocol DCS / ESD / F&G
(ABB, HONEYWELL, YOKOGAWA & TRICONEX) / VMS(BENTLY NEVADA) / PLC(Allen Bradley) MMS, MARK-6 (GE) systems and field
instrumentation .And my area of experiences are listed below;
 KENTECH, (Kuwait National Petroleum TRIN-4) oil & gas, E&I QC INSPECTOR DIVISION
 DODSAL, (S.G.D. Abu Dhabi) oil & gas refinery, E&I QC INSPECTOR DIVISION
 CONSOLIDATED CONTRACTORS CO. (Kashagan Offshore) oil & gas refinery, INSTRUMENT
QC INSPECTOR DIVISION
 QATAR KENTS (532 Paerl, GTL Project Qatar) oil & gas refinery, INSTRUMENT QC
INSPECTOR DIVISION
 S.A.KENTS, (JAC Project 618 Jubail) power plant & oil & gas refinery, E&I QC INSPECTOR
DIVISION
 AL-HASAN ENGINEERING CO. S.A.O.G. (L.N.G. Project,Sur(Oman) construction &
commissioning oil & gas refinery, E&I QC INSPECTOR DIVISION
 ELEMATICS ENGINEERING P.LTD (Haldia refinery W.B, INDIA) oil & gas refinery,
INSTRUMENT TECHNICIAN DIVISION
 MIRAJ INSTRUMENTATION SERVICES (R.I.L Hazara Surat,Gujrat) oil & gas refiner,
INSTRUMENT TECHNICIAN DIVISION

2. Thank you for your time and consideration. I look forward to speaking with you about this employment opportunity.
Mohammad Tanweer
E & I QA/QC INSPECTOR/SUPERVISOR
Commissioning and maintenance
: + 91-9920359261/91-9771357901
: tanweer_alam51@yahoo.com
: mohammadtanweer.alam1
Senior level assignments in Project Management /Construction /Commissioning / Operations &
Maintenance (Upstream & Downstream) with an organization of repute.
Professional Overview
A dynamic professional with over 14 Years of rich experience in Construction, Commissioning, Maintenance and Project Management
in petrochemical plants, gas plants, Gas turbine compressor, Production Well, Water Injection Cluster ,Metering Skids, Water Injection
Wells, Remote Degassing stations ,Central Degassing Stations and refinery sector.
 Recently associated with KENTECH (KUWAIT NATIONAL PETROLEUM TRIN-4) as E&I QA/QC INSPECTOR
 A keen planner with expertise in handling projects for improving efficiency of automation & control using available resources & by
installing suitable instruments as per requirement.
 Well versed with international industry codes and standards related to safe systems and electrical systems for instrumentation such as
ATEX CERTIFICATIONS, NACE, NEMA, ANSI, NEC/IEC ISO, etc.
Core Competencies
E &I QA/QC INSPECTOR:-
 federation work, support work, Cable Pulling, Glanding work, Meggering & Loop checking Etc.
 daily basis meeting & Discussion Co-ordination with client, Engineers, Staffs, site loops Package
 Participating on Performed vendor inspection activities in collaboration with independent testing agencies, as & when required
 Assist in the preparation review and updating of company’s Quality control manual & operation procedure in accordance with the
ISO 9000 Quality System
 Preparing QCP, ITP’S and inspection check list for procurement and construction accordance to project Quality plan (PQP)
 Overseas the documents control management & ensure availabilities of current client engineering standards procedure and
industrial codes and standards as basis of project Quality records of completed projects till retention period.
 Co- ordinates and raising RFI with client project inspection unit for project inspection & stage wise activities for witness/hold point.
 Also familiar latest calibration certificate all measuring instrument are in operational & calibrated condition, which will be utilized in
supervising.
 Also training of personnel & guiding sub contractor
 Also responsible for checking verifying, reviewing the construction drawing covering specification, P&ID, ILD & other attachment
prior to installation.
 Execution of installation inspection and test plan for each phase and instrumentation activities arranging inspection with client for
final acceptance.
 Effectively co- ordinate with related discipline
 Punch listing, processing & updating QC Dossiers & implementing the QC plan & co ordination with the client to final acceptance of
plant hand over.
 Involved during the bench Calibration in Instrument Calibration shop for various types of Instruments such as Valves.
 Construction work, Installation of Panel, Tray Work, Tubing work Instrument Installation All type of Transmitters, Switches, Gauges,
Control Valve, MOV,
 Junction Boxes installation and with the client & Operation department for plant startup and Shutdown schedule.
 Flow, Level , temperature & Pressure Transmitters, Switches, Gauges, and Calibration of Control Valve, ESD and MOV
 Preparation of project Quality control plan and inspection and test plan (QCP & ITP) for awarded contract projects.
 Familiar with international STD’S ISA, DIN, BSI, IEC, ANSI, API, NEC and NEMA
 workers, and checking of site activities of work progress.
 Hook-up Drawing Etc & Assisting for Preparation of Review the design deliverables like Loop Diagrams, Instrument Segment Diagram,
Block Diagrams, Interconnection Diagrams, Wiring Diagrams, Cable schedules, Hook-up Drawings, Instrument Support Drawings,
Cable tray layouts, Equipment Support detail drawings, MCT layouts / schedule, control building / switchgear building layouts, F&G /
telecom layout, Alarm & Trip sheets, I/O list, Instrument Index etc..

3.  Review the design documents during the various stages of project execution. Participate in HAZOP, HAZID and SIL sessions for new
projects and provide inputs for P&ID, PFD, Cause & Effect Charts, Control Philosophy, operation/ shutdown/maintenance
procedures.
Commissioning and maintenance:-
 Managing overall activities pertaining to installation and commissioning of wide range of oil and gas industries in India and Middle East.
 Provide support to the Project Hook-up & Commissioning/ start-up teams by means of reviewing all pre-commissioning/Commissioning
deliverables/Check list/loop checking and logic testing Procedures/Method statements.
 Carryout the partial stroke Testing of Shut down Valves (ON/OFF) and testing of split range control in control valves.
 Carryout the integration ,commissioning and testing of DCS HART and Foundation fieldbus /ESD/F&G (YOKOGAWA, ABB,HONEYWELL
& TRICONEX) / VMS(BENTLY NEVADA 7200,3500,3200) / PLC(Allen Bradley) MMS&MARK 5, MARK 6 OF (GE) systems, Foundation
Field Bus (YOKOGAWA), DCS and Field devices, HIPPS, Multiphase flow Meter(HIAMO) Well Head Control Panel(PETRONASH), Air
Compressor package(ATLAS COPCO), Nitrogen Generation package(GENERON), Lube Oil & seal Water package for pumps, Gas
turbine compressor (GE), Anti surge system (CCC) Chemical Injection System.
 Working experience on micro motion, turbine, vortex, and various smart family and FF transmitters
 Worked independently in shifts and emergency call on Duties
 Carried out preventive and Breakdown maintenance of all quality critical and safety critical instruments
 Actively involved in day to day planning and proper implementation of scheduled job activities, and man power distribution, Daily job
progress meeting, and reporting
 Updating in MAXIMO daily work progress and man hour and history, Tracking and maintaining equipment history.
 Coordinate with multi-disciplined task force and related departments for smooth and safe operation
Quality Assurance & Safety:-
 Managing QA/QC activities for RFI, NCR and Punch List Activities.
 Conducting day to day jobs in accordance with safety rules.
 Preparing and arranging all types of Electrical/Instrument Work Permits for green/brown field (PTW Holder of QP/ARAMCO).
 Keep the knowledge in safety standards and reliability of equipments.
 Develops and ensure the implementation of the QHSE Management System in compliance with project standards (ISO)
Career Highlights
E&I QA/QC INSPECTOR (01ST
January 2014 To 05th
January 2015)
KENTECH (Kuwait)
Project: Kuwait national petroleum (trin-4)
Role
 Responsibilities: As a Project management team member I have to ensure that the Instrument implementation contractor carry out the
instrumentation works including Construction and commissioning , Fire & Gas and pneumatic instruments, QC inspection, Testing,
Trouble shooting and Documentation in accordance with clients and vendors design, specification and schedule.
 E&I Inspection during installation as per AFC Drawing/Client specifications and witnessing the function test of various electrical
equipment s of the offshore drilling rigs, land rigs & vessels and preparing the relevant documents.
 Analyzing and interpreting engineering & construction drawings.
 Preparing the ITP’s/ACP’s and quality procedures/forms for the electrical systems of the new built & refurbishment of jack up rigs/Land
rigs /vessels.
 Preparation and submission of RFI.

4.  Mechanical completion of various electrical system i.e. witnessing the Insulation Resistance/continuity test of all wiring systems prior to
termination of cables to the equipment’s, panel boards, MCCs & switchboards and verifying the cable fastening.
 Follow up with the EPC contractor the construction planning and progress on daily basis. Working on the definition and execution of
instrumentation scope of work
 supervision of mechanical completion Walk down, reinstatement and plant handover activities and make sure
that the punch lists works are performed correctly and rapidly
E&I QA/QC INSPECTOR (20th
June 2012 To 03rd
October 2013)
Dodsal under S.G.D. (Abu Dhabi)
Project: S.G.D.( Abu Dhabi)
Role
 Supervise and lead a team of commissioning technicians and give assistance to the commissioning manager and engineer.
 Technical support to Project Pre-commissioning/ Commissioning/ start-up teams by means of reviewing all pre-
commissioning/Commissioning deliverables/Check list/Operational Test Procedures/Method statements/ control system philosophy.
 Involvement in the Process Hazard Evaluation process, PSSR (Pre-Start-up Safety Review) and development of DCS configuration
 Preparation of material submittal related to electrical, instrument system including fir & gas system.
 Preparation of quality control formats for pre-commissioning checks &commissioning check for electrical & instrument system. Most of
system were subcontracted, hence the document were reviewed & checked as per project requirement.
 Preparation of punch list item as referred in MIR & RFI by client, those punch list items which need to be rectified was referred to
construction team to comply with, and the one which is satisfying the project standard were communicated to client.
 Assist with third party in connection with inspection, Preparation of quality control plan & procedure with reference to QP standard,
Making CCN against QP comments.
 Participated in the SAT for F&G systems, DCS / RTU panels (ABB), MPFM and other utility packages.
 Participates in the development of operation, maintenance and start-up philosophies.
 Take part in Machinery Reliability team meetings on Instrumentation issues troubleshooting.
 Monitor Progress and prepare regular reports for management, addressing any significant variances in manpower budget expenditures
together with recommendations for corrective action if necessary.
 Compilation of handover MC (Mechanical Completion) & RFC (Ready for Commissioning) dossiers and agreed punch lists.
 Preparing the requirements for temporary equipment to facilitate the Commissioning/Start-Up activities.
 Prepare the construction and commissioning As-built documents before submit.
 Interface with the Project Management team and Client (ARAMCO).
 Involvement in the Preparation of Commissioning data base in ICAPS (Integrated Commissioning and Progress System).
 Supervising the loop checking of instruments and testing of pumps logic.
 DCS/ESD/F&G(ABB-800XA and freelance)/PLC systems, SCMS (Substation Control Monitoring System) MPFM, HIPPS(High Integrity
Protection System), Flare Ignition Panel (Flare System), Air Compressor package (ATLAS COPCO), Nitrogen Generation package
(GENERON) and Chemical Injection System (vendor: FRAMES) in Remote Degassing Station (RDS), Central Degassing Stations,
(CDS) Water Injection Clusters and Oil Production wells, Surface Injection Pumps (SIP), ETC.
INSTRUMENT QA/QC INSPECTOR (9th
April 2011 to30 May 2012)
Consolidated contractors company
Project: Kashagan offshore (Kazakasthan)
Role
 Managing and planning of electrical and instrumentation commissioning activities in a safe manner.
 Attending safety and progress meeting on weekly basis, coordination with client and permit issuing authority.
 Supervision of Pre-commissioning & Commissioning activities of foundation field bus instruments and system (Yokogawa CS 3000).
Responsible for preparation of instrument loop package, documentation of loop tested and packages and updating of instrument
database and maintaining up to date documentation.
 Preparation and submitting of As-Built drawings and data sheets, Checking, verifying and reviewing the construction drawings covering
ISS, P&ID,ILD,SLD and WIRING Details etc.
 Make verification for the RFI submitted by the contractor, that the work to be inspected is complete and in compliance with the Saudi
ARAMCO Engineering Standard. Carry out walk down for construction completions with maintenance and operation team, Perform SAT
(Site Acceptance Test) with vendor..
 Preparing the list of the Job Specifications and material requisitions required to comply with the project requirements.

5.  Discussing with the Client Representatives, for clearing the technical problems during the execution period.
 Keeping the Contract documents and the project quality specifications to ensure the activities are carried out as per the project scope.
 Review and close out of Punch List items, Site Queries and Technical Verification lists.
 Liaise with other departments, clients, vendors, subcontractors and third parties.
 Preparation of weekly/monthly report and attend the weekly shutdown progress meetings with client (shell).
 Commissioning of DCS YOKOGAWA 3500 Vibration monitoring system (BENTLY NEVADA 3500 SERIES) motor drive compressor, Anti
surge system (ccc), Water chiller plant with Allen Bradley PLC, and VFD system.
 Successfully have done 06 month warranty period maintenance and support of Client | (shell)
INSTRUMENT QA/QC INSPECTOR (25th
APRIL 2009 to 29th
JUNE 2010)
Qatar Kents
Project: 532 paerl, GTL Project (Qatar)
Role
 Manage and supervise the instrumentation and process commissioning activities at the site on a day-to-day basis.
 Provide the technical support and quality based execution/construction ideas to the Instrument Team in order to improve the work
progress.
 Checking of construction drawings for Instrumentation system, Electrical System and Fire & Gas system.
 Preparation of required method statements & procedures of related site activities to be submitted to client, Inspection of cable tray
works,conduiting works frames and supports installation, instrument stands/extensions installation, Cable laying, termination, impulse
piping, tubing and instrument air lines, leak test and hydro test.
 Inspection of installation, testing and pre-commissioning of Transformer, Motor, Push button, Junction box, DB, MDB, MCC, PCC, VFD,
Control Panel, LV/MV panel, Lighting and power system, UPS, Battery bank and battery charger, switchgear and feeder panel etc.
 Inspection of calibrations activities for control valves and all kind of process control instruments..
 Inspection of earthling work such as CAD welds joint, Earth pits.
 Maintain PTW system for all Instrumentation work permits and assists in project closeout and punch list issues.
 On-site coordination of Loop checks and Functional checks pre commissioning and commissioning and startup.
 Successfully handled the pre-commissioning and commissioning of instrument systems, including updating drawings and producing 'As-
Built' up to final acceptance tests.
 Testing and commissioning of DCS//ESD/ F&G systems (flashers, smoke detectors, heat detectors, flame detectors, gas detectors and
 MCP (manual call Point) INERGEN system, and other utility systems in the plant.
 Successfully have done 06 month warranty period maintenance and support of Client (PETROCANADA)
E & I QA/QC INSPECTOR (15th
July 2008 to 24th
April 2009)
S.A.KENTS ( Saudi Arab K.S.A)
Project: JAC Project 618 (Jubail)
Role
 Successfully handled the Loop Checking, pre-commissioning / commissioning/start-up of instrument systems, including updating
drawings and producing 'As- Built' up to final acceptance tests.
 F&G systems (smoke detectors, heat detectors, flame detectors, gas detectors and MCP(manual call Point) INERGEN system,
Telecommunication System
 Inspection and supervision of the installation of field mounted instruments, junction boxes, local control panel, cable tray, air line/ impulse
line tubing, panels inside the control room, fire & gas system PAGA system such as push button, Horn & beacon and fire detection
system and grounding system. Supervision of the calibrations, loop test of field devices. Pneumatic leak test of air line/Impulse line
tubing.
 Insulation Resistance Test and continuity check for Instruments Cables & Power Cables, leading a team of foreman and technicians,
briefing them of their daily work and monitoring the progress at closer level.
 Preparation of punch list, follow up of rework and involvement of modification activities. Coordinates with clients project inspection unit for
project inspection and stage wise activities for Preparation of Inspection Test Plan,(ITP) Check sheets & Test Reports for all Instrument
installation including F & G as per project requirement.
 Suggestion and follow up the procurements of materials, Materials Receiving Inspection upon arrival
 Attending the FAT for Electrical switchgear panel and instrument Marshalling, Server, RTU and Relay cabinets. Same will be Confirming
in the field SAT and Hand over to the clients.
 RFI raising, Material Receiving Inspection, field Inspection for all electrical & instrument activities at site.

6.  Responsible of calibration, Commissioning AND trouble shutting like HART and FF Protocol YOKOGAWA DCS and Field Device, on/off
ESD shutdown valve control valve electronic and pneumatic transmitter switches ETC.
 Successfully completed (Sulfur recovery, Sulfur loading, Cracker, NGL Unite and Flare system)
 Attained weekly meeting with client and subcontractors and PMC teams to follow up the progress and related issues.
E&I QA/QC INSPECTOR (09th
August 2005 to 21st
January 2008)
AL-hasan Engineering Co. S.A.O.G.
Project: L.N.G. Project, Sur (Oman)
Role
 Carry out preventive and break down maintenance, Loop Checking and arranging of spares, materials, test equipment’s etc.
 Supervising the fabrication & installation of cable tray works, conduiting works frames and supports, instrument extensions. Cable laying,
termination and testing. Impulse piping, tubing, air lines, leak test and hydro test.
 Repairing and calibrations of electronic instruments and pneumatic instruments. Communicating and forwarding the data of weekly
progress and daily progress to the client.
 Attending the construction meeting and planning for the further assignments in hand.
 Responsible for the installation of all the control panel, JB’s, ESD Valve, BDV, Control Valve’s and electrical and instrument devices.
 Supervision of demolition of exist instruments and electrical panel and installation of new panels.
 Contacting pre-job meeting, risk analysis and toolbox talks.
 Daily job progress reporting, failure reports and completing assigned job on time Replacement from old pneumatic system and
transmitter to electronic
 Employed as group leader for the upgrading and revamping project for both instruments and system (YOKOGAWA TDC 3000 system
and smart serious transmitters)
 in loop checking, calibration and commissioning jobs for both pneumatic and electronic process instruments and control systems
Instrumentation Technician (05th
march 2002 to 02nd
March 2005)
Elematics Engineering pvt.ltd. (India).
Project: Haldia Refinery (West Bengal)
Role
 Carry out all instrument loop checking/functional test/pre-commissioning and commissioning and related activities in the Chemical plant,
 Instruments (Gauges, transmitters, Control Valves), Fiber optic patch panels and related construction activities.
 involved in Calibration and Testing of (DP LT, DPT, PT,TT, TS,PG,LG) Etc. in Calibration shop
 Field Instrument installations, JB installation, leak test for impulse line, and calibration to ensure the quality criteria are kept and no
violation has occurred.
Instrument Technician (02 January 2000 to 01 January 2002)
Technimont ICB Ltd, India.
Project: R.I.L. Hazara (Surat Gujrat ,India)
Role

7.  Calibration of all Electronic Hart Protocol and pneumatic transmitter Gauges, switches, Pneumatic controller, control valve, ON/Off valve,
emergency valve (Z.V), PZV
 loop check, from field to system, Analog and digital as per ILD/ Segment diagram, specification sheets and P&ID commissioning as per
logic, and Cause & effect Diagram, specification sheets and P&ID, valve and Transmitter trouble shooting. /functional test/pre-
commissioning and commissioning d related activities in the Chemical plant
IT Skills
 Operating System -Linux, WINDOWS 7/8/XP/Vista,
 Productivity Tools -MS Office/Excel/ Word/ POWER POINT, 2010, ADOBE 2010.
Upstream/Downstream Facilities Handled
 Separators, Gas Turbine and Anti surge Control System, Lube Oil Systems and Seal Systems.
 Disposal Water Tank and Pumps, Recovered Oil Drum and Pumps and Drain System.
 Wash Water System and Chemical Injection Systems
 Oily Water Degassing unit, Vapor Recovery Unit, Blow down System, Flare systems and Fuel Gas systems.
 Nitrogen Generator Unit and Air Compressor Package.
Major Instruments handled
 Flow Meters: Multi Phase Flow Meter (HIAMO), Mass flow (Rosemount and Forbes Marshall), Vortex (Yokogawa), Magnetic meter
(Yokogawa and Forbes Marshall), Orifice, Turbine type & Oval wheel meters, Ultrasonic flow meters (GE), Rota meters (KHRONE).
 Foundation Field bus –Emerson Process Management, Yokogawa
 Radar level transmitter- ABB, Rosemount, K-Tech
 Transmitters: Rosemount (Smart, FF, Foxboro Intelligent Transmitter, Honeywell, Yokogawa, ABB, Siemens.
 F&G system: Simplex, General Monitors, MEDC, Tyco, Dragger etc..
 Control Valves: FISHER, MASONONELIAN, ABB, met so, Flowserve etc.
 Instrument fittings: HOKE, PARKER etc.
 Surface Injection Pumps (SULZER)
Educational Highlights
 DIPLOMA IN ENGINEERING from Bihar Government Engineering College, Bhagalpur (India)
 SSC(Secondary school Education) from (CENTRAL KARIMIA HIGH SCHOOL SAKCHI)
Professional Enhancements
 H2S Escape Mask training & Confined Space Entry Training
 Fire Fighting system training
 Safety Induction – SHES training center
 PTW Training attended and passed for ARAMCO and Qatar Petroleum.
 Health Safety and Environment, and Occupational Health and Safety codes and standards.
Personal Information
Languages Known : ENGLISH, HINDI, URDU and ARABIC.
Date of Birth : 16-04-1982
Marital Status : SINGLE
Nationality : INDIAN
Address : VILL: CHAMAN BAGH, P.O: PAKRIBARAWAN, DIST: NAWADA, BIHAR-805124
Phone : PH. +91 9771357901/ +91 9920359261
Guardians : MOHAMMAD EQUABAL AHMED (PH- +91 8292298144)
Passport Details

8. Passport Number : L-2403694 (ECNR)
Place of Issue : PATNA
Date of issue : 04-07-2013
Date of expiry : 03-07-2023
Old Passport Number : F-6440608
Declaration- I hereby declare that the above information is true and correct to the best of my knowledge
DATE : MOHAMMAD TANWEER
PLACE :