1. RESUME
DEEPESH .S
THATTARAZHIKATHU VEEDU
MANANDY P. O.
PATHANAMTHITTA (Dist),
KERALA STATE
INDIA, PIN 691530
Phone: 0091-4734-283317
Mobile: 0091-7874615456
: 0091-8086012651
: 0091-7024905919
E-Mail: deepeshs1979@gmail.com
PROFESSIONAL SYNOPSIS
Senior Project Engineer (Mechanical/Piping) with 9 + years of overseas and Indian experience
in the construction of various Petrochemical Plants, Refinery, Power Plants, Sewage treatment plant
and Switch gear manufacturing company.
CAREER OBJECTIVE
Utilization of my experience & knowledge in a reputed organization there by become a part of
the company’s progress.
PROFESSIONAL EXPERIENCE
A. SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL CO,
(SATORP) Al Jubail, Saudi Arabia, package 1.
Company : M/s NSH Corporation, SAUDI ARABIA
Client : M/s TECHNICAS REUNIDAS
Designation : PIPING ENGINEER
Jobs Involved : April 2011 – Feb 2012
 Fabrication and erection of Utility piping systems.
 Identifying the materials (pipes, flanges and fittings etc) as per material
like off list during the fabrication.
 Supervise piping erection/fabrication and testing assistance.
 Generate Piping Drawings and Isometrics for construction and erective
according to site conditions in accordance with applicable safety
regulations and quality requirements.
 Test pack co-ordination with piping const for completion.
 Line checking and clearing of the punch items like valves, gaskets its
orientation, direction, schedule, rating and size as per the drawing.
 Preparation hydro testing loops with P & ID.
 Reinstatement completion works
 Final box up activities prior to closure of equipment.
 Confirm repairs, re-testing and re-inspection in accordance with
specifications.
 Attend walk thru with other discipline engineers and contractor’s and
assist in preparing punch list and categorized the punch list.
 Monitor daily works and prepare progress report.
 Request spools, support, fitting and field erection materials as per
schedule.
B. NATIONAL CHEVRON PHILLIPS PROJECT ETHYLENE CRACKER UNIT (NCP) Al Jubail, Saudi Arabia.
Company : M/s NSH Corporation, SAUDI ARABIA
Client : M/s JAPAN GAS CORPORATION ARABIA LTD.
Designation : PIPING ENGINEER
Jobs Involved : April 2010 – April 2011

2.  Piping erection, fabrication and pump pre-alignment piping works in
compressor area.
 Monitoring and co-ordination of piping erection in pipe rack.
 Check, verity/review fabricated and erected lines as per latest iso
drawing.
 Check flow direction arrows on valves; verify that the properly
identified valves are installed in accordance with the flow diagram.
 Application of International Standards for process piping like,
ANSI/ASME B31.3, and ASTM specifications, with basic knowledge of
ASME B16.5, ASME B16.9, ASME B16.11 etc.
 Identifying piping and equipment location as per GAD and prepare the
coordination.
 Confirm repairs, re-testing in accordance with specifications.
 Ensure that all required NDE shall be performed prior to final system
hydro/pneumatic testing unless otherwise specified by engineering.
 Piping Test pack line checking and punch list preparation.
 Reinstatement works for valves gaskets, instruments etc done as per P
& ID and iso drawing.
 Responsible for carrying out Mechanical Clearance, Conducting Hydro
and Pneumatic tests fulfilling commissioning and Pre-Commissioning
requirements for the project.
 Interconnection of various process piping to vessel, columns, furnace,
pumps, compressor
C. LUSAIL SEWAGE TREATMENT PLANT, LUSAIL, DOHA, QATAR.
Company : M/s GULF EAST ENGINEERING TRADING AND CONTRACTING
COMPANY, ALKHOR
Client : M/s DEGREMONT
Designation : MECHANICAL ENGINEER, PIPING
Jobs Involved : April 2008 to July 2009
 Responsible for pipe fabrication, erection, alignment, testing and
reinstatement works in sewage treatment plant.
 Planned, Organized and executed Fabrication and Erection, in
accordance with Project Schedule and erection sequence.
 Solved construction problems and difficulties arises in fabrication due
to discrepancies in design and material incompatibility.
 Coordinates the activities of subordinates in their area of responsibility
and monitors their activities to ensure that fabrication and Erection
proceeds according to technical specifications.
 Ensure the Productivity and Quality is maintained by subordinates.
 Ensuring applicable safety regulations and quality requirements.
 Coordinate with other disciplines in site.
 Test pack co-ordination.
 Responsible for carrying out Mechanical Clearance, flushing and air
blowing for pre-commissioning requirements for the project.
 Responsible for carrying the reinstatement activities in the unit.
INDIAN EXPERIENCE
1. RELANCE INDUSTRIES LTD,JAMNAGAR,GUJARAT
Company : M/s Simplex Infrastructure LTD
Client : M/s RELIANCE REFINERY LTD
Designation : SENIOR PROJECT ENIGINEER (PIPING)
Jobs Involved : August 2015 to till date.

3. • Responsible for pipe fabrication, erection, alignment, testing and
reinstatement works of AG & UG piping.
• Ensure the Productivity and Quality is maintained by subordinates.
• Planned, Organized and executed Fabrication and Erection, in
accordance with Project Schedule and erection sequence.
• Solved construction problems and difficulties arises in fabrication
due to discrepancies in design and material incompatibility.
• Ensure that all required NDE shall be performed prior to final
system hydro/pneumatic testing unless otherwise specified by
engineering.
• Responsible for carrying out Mechanical Clearance, Conducting
Hydro and Pneumatic tests fulfilling commissioning and Pre-
Commissioning requirements for the project.
2.2x800 THERMAL POWER PLANT, NTPC, LARA, CHHTISHGARH
Company : M/s Bygging India Limited
Client : M/s NTPC
Designation : SENIOR MECHANICAL ENIGINEER
Jobs Involved : March 2014 to July 2015.
 Fabrication, erection of various structural, piping woks of 2*800MW
thermal power plant.
 Fabrication, erection various Structural Parts Such as Beams, columns
of TG,slip form, Platform, Gallery, Can of chimney and cooling water
line.
 Coordinates the activities of subordinates in their area of responsibility
and monitors their activities to ensure that fabrication and Erection
proceeds according to technical specifications.
 Conducting and coordinating and making records, reports of the
various test such UT, DP, RT .
 Coordinate with other disciplines in site.
 Solved construction problems and difficulties aroused in fabrication
and erection due to discrepancies in design and material
incompatibility.
 Prepare the documents at the various stages of development of the
project and make regular presentation regarding the progress of work.
 Coordinating conducting painting, shot blasting and its testing,
documentation etc .
2. L & T ECC DIVISION, KANCHIPURAM, TAMIL NADU.
Company : M/s General Industrial Builders Pvt.Ltd.
Client : M/s L&T LTD
Designation : MECHANICAL PIPING ENIGINEER
Jobs Involved : July 2009 to March 2010 & July 2012 to March 2013
 Fabrication, erection and testing of Structural and, pipeline works of
Boiler, GT etc
 Supervise for fabrication and erection of various beams, columns, and
pipelines etc.
 Assist in the field engineering works such as field revision of various
drawing and as built design.
 Coordinate with other disciplines in site.
 Conducting and coordinating and making reports of the various test
such UT, DP, RT, hydro test, pneumatic test and flushing etc.

4. 3. ESSAR NEW POWER PLANT 50 MW COMBINED CYCLE POWER PLANT, HAZIRA, SURAT, GUJRAT.
Company : KARPARA PROJECT ENGINEERING PVT LTD.,
SURAT, Gujarat.
Client : ESSAR.
Designation : PIPING ENGINEER
Jobs Involved : December 2005 – March 2008
 Fabrication and erection of piping works in the STG, GT and HRSG.
 Supervise the orientation and the flow direction and fabricated pipe
lines.
 Supervise for fabrication and installation of pipe to fittings.
 fabrication, erection of various structural parts such as beams,
columns etc
 Erection of skids, heat exchangers, cooling tower, drum etc.
 Prepare the documents at the various stages of development of the
project and make regular presentation regarding the progress of work.
 Raising technical issues and discuss with engineer in charge and client.
 Allocate responsibilities to the workers and ensuring the job progress
as per schedule.
 Project execution without most quality in specified time.
 Conducting and coordinating air test, acid cleaning, and oil fleshing or
oil line up to stand level.
4. Company : ALUMINIUM INDUSTRIES LTD (ALIND) MANNAR, KERALA.
Designation : MAINTENANCE, PRODUCTION ENGINEER
Jobs Involved : September 2004 to Nov 2005
 Responsible for fabrication of various parts of switch gear.
 Responsible for machining of various machining parts of switch gear.
 Conducting various maintenance works and keep the records for this.
 Revise, modify and issues the quality document s according to ISO.
 Allocate and ensuring the job progress as per schedule timely.
EDUCATIONAL PROFILE
Professional
1) Degree in Mechanical Engineering (M. S. University)
2) Diploma in Mechanical Engineering (Tamil Nadu Technical Education Board)
3) Mechanical Draftsman (Auto CAD 2000) (Approved by Govt. of India)
4) CNC lathe programming and operation (Approved by Govt. of India)
Academic Credential
a) Pre Degree (Kerala University)
b) Secondary Education (Kerala Education Board)
Computer Awareness
 Knowledge in computer basics (MS WORD, EXCEL, WINDOWS &) INTERNET

5. PERSONAL DETAILS
Date of Birth : 01-06-1980
Father’s Name : P Surendran Nair
Gender : Male
Marital Status : married
Nationality : Indian
Present Address : Thattarazhikathu Veedu
Mannady P . O.. Mannady
Pathanamthitta (Dist)
Kerala State, India,
Pin: 691 530
Ph: 04734-283317
Mobile : 7874615456, 8086012651
E-Mail : deepeshs1979@gmail.com
Languages Known : English, Hindi, Tamil and Malayalam
PASSPORT DETAILS
Passport No : L3020373
Place of Issue : Trivandrum
Date of Issue : 19-07-2013
Date of Expiry : 18-07-2023
DECLARATION
I hereby declare that the above statements are true and correct to the best of my knowledge and belief.
Place: Mannady
Date : DEEPESH .S