Paperhanning tools
•Download as PPTX, PDF•
1 like•174 views
Paperhanging tools include brushes, shears, rules, paste boards, plumb bobs, seam rollers, trimming knives, wall brushes, buckets, and sponges. These tools are used for measuring, cutting, applying, and smoothing wallpaper and fabrics on walls and ceilings. Proper cleaning and storage helps maintain the tools.
Report
Share
Report
Share
Recommended
Paperhanging tools
This document provides information on common tools used for paperhanging and installing wallcoverings. It describes the following tools: paperhanging brush, paperhanging shears, rule, paste board, plumb bob, seam roller, trimming knife, wall brush, bucket, and sponge. Each tool is defined, its purpose explained, and tips provided on proper use and maintenance.
Fibre mesh-Amit Payal
Fiberglass mesh is a lightweight yet strong material that is resistant to burning. It is commonly used to reinforce plaster on walls, ceilings, and facades as it improves the mechanical strength of plaster surfaces and protects them from cracking. Fiberglass mesh comes in various densities from 90-185g/m2 and mesh sizes from 2x2mm to 5x5mm for different applications including exterior cladding, interior plastering, flooring, and tile installation.
Perfect packing associates introduction -
Perfect Packing Associates introduces itself as a leading supplier of industrial products such as asbestos, non-asbestos, engineering plastics and other materials. It offers over 28 product categories at competitive prices and aims to meet customer needs through on-time delivery and transparent business transactions. The company has well-established infrastructure and experience in handling bulk orders to efficiently meet customer demands.
Market Survey on Plywood
The document provides information about plywood and MDF. It defines plywood as a manufactured wood panel made of thin layers of wood bonded together. There are two main types of plywood: commercial plywood and waterproof plywood. The document also defines MDF as an engineered wood product made of softwood fibers bonded under heat and pressure. The two main types of MDF are commercial MDF and waterproof MDF. The document then describes the manufacturing processes for both plywood and MDF.
TTG installation
This document provides instructions for installing artificial grass in 6 steps:
1. Prepare the ground by leveling and compacting the surface.
2. Lay the artificial grass and let it settle for a few hours to prevent wrinkles.
3. Cut and trim the grass edges and lay seeming tapes along the edges.
4. Apply glue to the seeming tapes and joints and let dry before pressing together.
5. Optionally, infill the grass with fine sand for outdoor installations.
6. Fix the edges with nails or seeming tape and enjoy the new artificial grass.
Proposal FYP degree : Evaluating The Properties of Particleboard From Acacia ...
This document outlines a proposed study to evaluate the properties of particleboard made from Acacia species using different resin contents and board densities. The study aims to determine the mechanical and physical properties of particleboard using acacia species and to evaluate the effects of different board density and resin content on particleboard properties. The methodology describes the process for manufacturing particleboard including raw material preparation, mat forming, hot pressing, and testing to analyze properties such as bending strength, internal bonding, water absorption, and thickness swelling. Particleboards will be manufactured at three densities (500, 600, 800 kg/m3) and three resin contents (5%, 7%, 9%).
Coat and finishes c3
The document provides information about plastering work including required skills, knowledge, tools, materials and methods. It discusses unit codes, outcomes and job roles for plastering qualifications. It also outlines personal protective equipment, tools, materials and methods for plastering including applying different coats, using screeds, and installing beads. The key steps of plastering work like preparing backgrounds, checking suction, and applying scratch, laying and finishing coats are explained.
Binderless board
This document provides information on three types of panel boards: binderless wood particle board, cement bonded particle board, and gypsum board. It discusses the history, manufacturing process, uses, advantages and disadvantages of each type. For binderless board, it focuses on how temperature, compression, and particle composition affect the binding properties and final density profile. Cement bonded board and gypsum board are summarized with regards to their production levels globally and various applications.
Recommended
Paperhanging tools
This document provides information on common tools used for paperhanging and installing wallcoverings. It describes the following tools: paperhanging brush, paperhanging shears, rule, paste board, plumb bob, seam roller, trimming knife, wall brush, bucket, and sponge. Each tool is defined, its purpose explained, and tips provided on proper use and maintenance.
Fibre mesh-Amit Payal
Fiberglass mesh is a lightweight yet strong material that is resistant to burning. It is commonly used to reinforce plaster on walls, ceilings, and facades as it improves the mechanical strength of plaster surfaces and protects them from cracking. Fiberglass mesh comes in various densities from 90-185g/m2 and mesh sizes from 2x2mm to 5x5mm for different applications including exterior cladding, interior plastering, flooring, and tile installation.
Perfect packing associates introduction -
Perfect Packing Associates introduces itself as a leading supplier of industrial products such as asbestos, non-asbestos, engineering plastics and other materials. It offers over 28 product categories at competitive prices and aims to meet customer needs through on-time delivery and transparent business transactions. The company has well-established infrastructure and experience in handling bulk orders to efficiently meet customer demands.
Market Survey on Plywood
The document provides information about plywood and MDF. It defines plywood as a manufactured wood panel made of thin layers of wood bonded together. There are two main types of plywood: commercial plywood and waterproof plywood. The document also defines MDF as an engineered wood product made of softwood fibers bonded under heat and pressure. The two main types of MDF are commercial MDF and waterproof MDF. The document then describes the manufacturing processes for both plywood and MDF.
TTG installation
This document provides instructions for installing artificial grass in 6 steps:
1. Prepare the ground by leveling and compacting the surface.
2. Lay the artificial grass and let it settle for a few hours to prevent wrinkles.
3. Cut and trim the grass edges and lay seeming tapes along the edges.
4. Apply glue to the seeming tapes and joints and let dry before pressing together.
5. Optionally, infill the grass with fine sand for outdoor installations.
6. Fix the edges with nails or seeming tape and enjoy the new artificial grass.
Proposal FYP degree : Evaluating The Properties of Particleboard From Acacia ...
This document outlines a proposed study to evaluate the properties of particleboard made from Acacia species using different resin contents and board densities. The study aims to determine the mechanical and physical properties of particleboard using acacia species and to evaluate the effects of different board density and resin content on particleboard properties. The methodology describes the process for manufacturing particleboard including raw material preparation, mat forming, hot pressing, and testing to analyze properties such as bending strength, internal bonding, water absorption, and thickness swelling. Particleboards will be manufactured at three densities (500, 600, 800 kg/m3) and three resin contents (5%, 7%, 9%).
Coat and finishes c3
The document provides information about plastering work including required skills, knowledge, tools, materials and methods. It discusses unit codes, outcomes and job roles for plastering qualifications. It also outlines personal protective equipment, tools, materials and methods for plastering including applying different coats, using screeds, and installing beads. The key steps of plastering work like preparing backgrounds, checking suction, and applying scratch, laying and finishing coats are explained.
Binderless board
This document provides information on three types of panel boards: binderless wood particle board, cement bonded particle board, and gypsum board. It discusses the history, manufacturing process, uses, advantages and disadvantages of each type. For binderless board, it focuses on how temperature, compression, and particle composition affect the binding properties and final density profile. Cement bonded board and gypsum board are summarized with regards to their production levels globally and various applications.
Stock trays
This document discusses stock trays used in dental impressions. Stock trays come in various materials like metal or plastic and have parts like a handle and flanges. They must be rigid but not too thick and simulate the finished denture. The borders should be smooth, rounded, and end 2mm short of the vestibular depth. Stock trays come in perforated for alginate or non-perforated for compound, and different shapes for dentulous or edentulous patients. Adhesives are needed to ensure impression materials firmly adhere to stock trays, like resin solutions for alginates.
Different types of boards
This short presention is about the dirrefent types of boards used in building construction, furniture, and interior design.
This presentation is intended towards Architects/ Architecture Students/ Interior designers and Building construction technology enthusiasts.
Buy Industrial Products on Atcomaart.com
Filament Tape
http://www.atcomaart.com/pd/66556848675170565548/packaging-tapes/filament-tape.aspx
Aluminium Tape
http://www.atcomaart.com/pd/56497056696866655370/packaging-tapes/aluminium-tape.aspx
Lamination Film
http://www.atcomaart.com/pd/68675751685455525570/packaging-tapes/lamination-film.aspx
Cotton Friction Tape
http://www.atcomaart.com/pd/53486765695752575052/electrical-tapes/cotton-friction-tape.aspx
.laminates -BUILDING MATERIAL-LAMINATE
Lamination is a process that bonds multiple layers of materials together to improve the strength and properties of the composite material. There are various lamination processes that are used depending on the materials. Decorative high-pressure laminates are commonly used for furniture and consist of layers of paper soaked in resins and bonded under heat and pressure to form a durable surface. Laminates undergo various quality tests and standards and are used in applications such as kitchen countertops, walls, and furniture.
Fibreboards
This document provides an overview of the fibreboard manufacturing process. It describes how fibres are produced from lignocellulosic materials through refining processes like attrition milling. Fibreboards can be made through dry or wet processes. The wet process involves forming fibres into a mat using water, while the dry process uses air-laid mat formation similar to particleboard. Key steps include refining, forming, pressing, humidifying, and trimming. The document also covers raw material requirements, properties specified in Indian standards, and references for further information.
Presentation
GCI sells landscape fabrics to help create beautiful, healthy landscapes. Heavier fabrics that are 4-6oz work best to suppress weeds over multiple years without tearing. The best choices are their 500 series 5oz woven fabric, which can last 6-8 years in full sun, and 600 series 6oz nonwoven fabric, which is easy to cut and dimensionally stable. Proper fabric selection is important to avoid project failures and match characteristics to the intended use such as landscaping, stabilization, filtration, or separation. Contractors should recommend the best options to customers.
KLSS BROCHURE 5-9-15
KLSS, Inc. is a company located in Seneca, South Carolina that provides products and services to various industries including paper, film, foil, textiles, and nonwovens. They offer industrial cutting equipment and services such as roll covering, yarn guides, spiral wound paper tubes, textile chemicals, poly woven tubing, and professional scissors and shears. KLSS specializes in supplying quality products, services, and repairs to the converting industry.
Plywood manufacturing
Plywood Manufacturing Process , How plywood is manufactured , Machines involved in plywood manufacturing ,
Plywood industry- A deep insight
A deep insight into into Plywood Market of India.
It includes industry knowledge , business model and examples.
tray definition and classification
Impression trays are devices used to carry, confine, and control impression material while making an impression. There are two main types of trays: prefabricated stock trays and individualized custom trays. Stock trays are used for primary impressions while custom trays are used for final impressions. Trays can be made of various materials like metal, plastic, acrylic, or thermoplastic resin. The selection of a tray depends on factors like the type of impression needed and whether the patient is edentulous or dentulous.
Floor Tape & Paints
Berachiah Project Services produces a variety of floor marking, demarcation, and slip-resistant products including line marking paints, floor tapes, grip tapes, aluminum stair treads, and contamination control mats. The document provides details on each product such as descriptions, sizes, colors, and intended uses. It aims to serve customers in the flooring industry and help improve safety. Contact information is provided at the end for those interested in ordering products.
Foundation and plain paper power point
This document provides information on tools, materials, and techniques for preparing surfaces and hanging foundation and plain wallpapers. It discusses:
- Tools used for measuring, cutting, pasting, and hanging wallpaper
- Proper preparation of surfaces like plaster, plasterboard, and previously papered walls
- Hanging techniques such as starting points, hanging around windows and lights, trimming, and hanging on ceilings
- Types of adhesives and their appropriate uses
agriculture & food processing
This document discusses various types of wire mesh and screens used in agriculture and food processing, including stainless steel wire mesh sieves, crimped wire mesh, knitted copper wire mesh, perforated metal mesh, flat wedge screens, wedge screen tubes, and sieve bend screens. It provides information on material options, size configurations, features, and applications for each type. An Ping County De Xiang Rui Wire Mesh CO., LTD is listed as the manufacturer and point of contact for these products.
plant-support-stakes
The document discusses different types of plant support stakes available from a supplier including natural bamboo stakes, fiberglass garden stakes, plastic coated metal stakes, and spiral tomato stakes. Bamboo stakes and fiberglass garden stakes are described in more detail. Bamboo stakes come in various sizes and colors and are used to support orchids and vines. Fiberglass stakes are strong, corrosion resistant, flexible, and long-lasting for supporting orchids, flowers, tomatoes and more. The supplier provides these stakes and poles in various specifications and packaging options.
Packaging & More
Promotional catalog on a variety of packaging, janitorial, food service, paint sundries, gloves, cordage and shipping labels.
Kn o 100378-fibreglass_boat_building
This document provides instructions for building fibreglass boats using basic materials and techniques. It begins with an overview of fibreglass as a boat building material and its advantages over wood and metal. The key materials needed are then described, including various types of fibreglass mats and resin. Tools and the boat building process are outlined, from preparing a plug or existing hull to create the mould, to laying up layers of fibreglass and resin on the mould to form the hull. Proper mixing and application of resin is emphasized. Finally, requirements for a sample 18.5-foot boat are listed to provide an example material and cost estimate. The overall process focuses on achieving a smooth finish using basic tools and materials
Creping. Tissue machine creping
Creping
The crepe blade is the point at which the final sheet appearance is created. The geometry of the blade and its application are critical in establishing the best possible end product. Specifically designed for tissue applications, the crepe blade, along with the Yankee against which it operates, is the heart of the process.
The doctor holder uses a special pneumatic loading arrangement to load the blade against the Yankee cylinder and has a “flexible finger” type backing. The mechanical lock prevents collision of the holder with the cylinder when there is no blade in place. For certain applications and upon request, a stiff holder can be substituted.
Angle adjustment
The doctor assembly is adjustable for different applications and end product properties. The entire assembly can be rotated on the assembly journal by means of a jacking bolt that changes the position of the assembly relative to the loading cylinder stroke.
At a glance
Flexible holder ensures even application of the creping load.
Adjustable angular position allows flexibility for different products and properties.
How to check wood furniture for quality
To check wood furniture for quality, examine the wood type, construction, and finish. Hardwoods like oak and walnut tend to indicate higher quality than softwoods. Look for strong joinery methods like mortise and tenon joints and corner blocks for stability. A quality finish will be smooth and even without blotches or scratches. Checking these elements can help determine how long the furniture will last.
Bloom, billet, slab, plate
Bloom, billet, slab, plate, sheet, strip are terms used in metalworking and manufacturing. Blooms undergo first breakdown of ingots through hot working and have a large cross sectional area. Billets are further reduced through hot rolling. Slabs are hot rolled ingots with a specific cross sectional area and width. Plates are thick products over 6mm, while sheets are thinner but wide, and strips are thin and narrow. Blooms, billets, and slabs are considered semi-finished products.
Cons 127
This document discusses dry lining and plasterboard installation methods. Dry lining involves covering wall surfaces with sheet materials like plasterboard, strawboard or fiberboard to simplify construction, improve finishes and add insulation/fire resistance. The most common method uses plasterboard, which consists of a gypsum core sandwiched between paper liners. Plasterboards are installed by fixing them to timber battens, metal channels, or bonding them directly to the wall with an adhesive backing. Joints are treated and corners reinforced to create a smooth, even surface.
PARTITIONS AND ROOFING SHEETS
MODULAR ALUMINIUM PARTITION
MANUFACTURING PROCESS OF ALUMINIUM PARTITION
MATERIAL USED FOR ALUMINIUM PARTITION
FIXING DETAILES OF ALUMINIUM PARTITION
MARKET PRICES OF ALUMINIUM PARTIONS
TIMBER PARTITIONS
TYPES OF TIMBER PARTITIONS
MARKET PRICES OF IT
G.I. ROOFING SHEETS
TYPES, SIZES, COLOURS AVAILABLE
POLYCARBONATED SHEETS
TYPES, SIZES, COLOURS AVAILABLE,PRICES
SEWING TOOLS
The document discusses various sewing tools and their uses. It identifies measuring tools like tape measures, sewing gauges, rulers, yardsticks, and L-squares or tailor squares. Cutting tools include bent-handled dressmaker's shears, pinking shears, scissors, and rotary cutters. Marking tools include chalk pencils, liquid marking pens, tailor's chalk, and wax chalk. Other tools mentioned are pin cushions, needles, sewing needle threaders, thimbles, fabric, and thread. Each tool is described along with its purpose in sewing.
More Related Content
What's hot
Stock trays
This document discusses stock trays used in dental impressions. Stock trays come in various materials like metal or plastic and have parts like a handle and flanges. They must be rigid but not too thick and simulate the finished denture. The borders should be smooth, rounded, and end 2mm short of the vestibular depth. Stock trays come in perforated for alginate or non-perforated for compound, and different shapes for dentulous or edentulous patients. Adhesives are needed to ensure impression materials firmly adhere to stock trays, like resin solutions for alginates.
Different types of boards
This short presention is about the dirrefent types of boards used in building construction, furniture, and interior design.
This presentation is intended towards Architects/ Architecture Students/ Interior designers and Building construction technology enthusiasts.
Buy Industrial Products on Atcomaart.com
Filament Tape
http://www.atcomaart.com/pd/66556848675170565548/packaging-tapes/filament-tape.aspx
Aluminium Tape
http://www.atcomaart.com/pd/56497056696866655370/packaging-tapes/aluminium-tape.aspx
Lamination Film
http://www.atcomaart.com/pd/68675751685455525570/packaging-tapes/lamination-film.aspx
Cotton Friction Tape
http://www.atcomaart.com/pd/53486765695752575052/electrical-tapes/cotton-friction-tape.aspx
.laminates -BUILDING MATERIAL-LAMINATE
Lamination is a process that bonds multiple layers of materials together to improve the strength and properties of the composite material. There are various lamination processes that are used depending on the materials. Decorative high-pressure laminates are commonly used for furniture and consist of layers of paper soaked in resins and bonded under heat and pressure to form a durable surface. Laminates undergo various quality tests and standards and are used in applications such as kitchen countertops, walls, and furniture.
Fibreboards
This document provides an overview of the fibreboard manufacturing process. It describes how fibres are produced from lignocellulosic materials through refining processes like attrition milling. Fibreboards can be made through dry or wet processes. The wet process involves forming fibres into a mat using water, while the dry process uses air-laid mat formation similar to particleboard. Key steps include refining, forming, pressing, humidifying, and trimming. The document also covers raw material requirements, properties specified in Indian standards, and references for further information.
Presentation
GCI sells landscape fabrics to help create beautiful, healthy landscapes. Heavier fabrics that are 4-6oz work best to suppress weeds over multiple years without tearing. The best choices are their 500 series 5oz woven fabric, which can last 6-8 years in full sun, and 600 series 6oz nonwoven fabric, which is easy to cut and dimensionally stable. Proper fabric selection is important to avoid project failures and match characteristics to the intended use such as landscaping, stabilization, filtration, or separation. Contractors should recommend the best options to customers.
KLSS BROCHURE 5-9-15
KLSS, Inc. is a company located in Seneca, South Carolina that provides products and services to various industries including paper, film, foil, textiles, and nonwovens. They offer industrial cutting equipment and services such as roll covering, yarn guides, spiral wound paper tubes, textile chemicals, poly woven tubing, and professional scissors and shears. KLSS specializes in supplying quality products, services, and repairs to the converting industry.
Plywood manufacturing
Plywood Manufacturing Process , How plywood is manufactured , Machines involved in plywood manufacturing ,
Plywood industry- A deep insight
A deep insight into into Plywood Market of India.
It includes industry knowledge , business model and examples.
tray definition and classification
Impression trays are devices used to carry, confine, and control impression material while making an impression. There are two main types of trays: prefabricated stock trays and individualized custom trays. Stock trays are used for primary impressions while custom trays are used for final impressions. Trays can be made of various materials like metal, plastic, acrylic, or thermoplastic resin. The selection of a tray depends on factors like the type of impression needed and whether the patient is edentulous or dentulous.
Floor Tape & Paints
Berachiah Project Services produces a variety of floor marking, demarcation, and slip-resistant products including line marking paints, floor tapes, grip tapes, aluminum stair treads, and contamination control mats. The document provides details on each product such as descriptions, sizes, colors, and intended uses. It aims to serve customers in the flooring industry and help improve safety. Contact information is provided at the end for those interested in ordering products.
Foundation and plain paper power point
This document provides information on tools, materials, and techniques for preparing surfaces and hanging foundation and plain wallpapers. It discusses:
- Tools used for measuring, cutting, pasting, and hanging wallpaper
- Proper preparation of surfaces like plaster, plasterboard, and previously papered walls
- Hanging techniques such as starting points, hanging around windows and lights, trimming, and hanging on ceilings
- Types of adhesives and their appropriate uses
agriculture & food processing
This document discusses various types of wire mesh and screens used in agriculture and food processing, including stainless steel wire mesh sieves, crimped wire mesh, knitted copper wire mesh, perforated metal mesh, flat wedge screens, wedge screen tubes, and sieve bend screens. It provides information on material options, size configurations, features, and applications for each type. An Ping County De Xiang Rui Wire Mesh CO., LTD is listed as the manufacturer and point of contact for these products.
plant-support-stakes
The document discusses different types of plant support stakes available from a supplier including natural bamboo stakes, fiberglass garden stakes, plastic coated metal stakes, and spiral tomato stakes. Bamboo stakes and fiberglass garden stakes are described in more detail. Bamboo stakes come in various sizes and colors and are used to support orchids and vines. Fiberglass stakes are strong, corrosion resistant, flexible, and long-lasting for supporting orchids, flowers, tomatoes and more. The supplier provides these stakes and poles in various specifications and packaging options.
Packaging & More
Promotional catalog on a variety of packaging, janitorial, food service, paint sundries, gloves, cordage and shipping labels.
Kn o 100378-fibreglass_boat_building
This document provides instructions for building fibreglass boats using basic materials and techniques. It begins with an overview of fibreglass as a boat building material and its advantages over wood and metal. The key materials needed are then described, including various types of fibreglass mats and resin. Tools and the boat building process are outlined, from preparing a plug or existing hull to create the mould, to laying up layers of fibreglass and resin on the mould to form the hull. Proper mixing and application of resin is emphasized. Finally, requirements for a sample 18.5-foot boat are listed to provide an example material and cost estimate. The overall process focuses on achieving a smooth finish using basic tools and materials
Creping. Tissue machine creping
Creping
The crepe blade is the point at which the final sheet appearance is created. The geometry of the blade and its application are critical in establishing the best possible end product. Specifically designed for tissue applications, the crepe blade, along with the Yankee against which it operates, is the heart of the process.
The doctor holder uses a special pneumatic loading arrangement to load the blade against the Yankee cylinder and has a “flexible finger” type backing. The mechanical lock prevents collision of the holder with the cylinder when there is no blade in place. For certain applications and upon request, a stiff holder can be substituted.
Angle adjustment
The doctor assembly is adjustable for different applications and end product properties. The entire assembly can be rotated on the assembly journal by means of a jacking bolt that changes the position of the assembly relative to the loading cylinder stroke.
At a glance
Flexible holder ensures even application of the creping load.
Adjustable angular position allows flexibility for different products and properties.
How to check wood furniture for quality
To check wood furniture for quality, examine the wood type, construction, and finish. Hardwoods like oak and walnut tend to indicate higher quality than softwoods. Look for strong joinery methods like mortise and tenon joints and corner blocks for stability. A quality finish will be smooth and even without blotches or scratches. Checking these elements can help determine how long the furniture will last.
Bloom, billet, slab, plate
Bloom, billet, slab, plate, sheet, strip are terms used in metalworking and manufacturing. Blooms undergo first breakdown of ingots through hot working and have a large cross sectional area. Billets are further reduced through hot rolling. Slabs are hot rolled ingots with a specific cross sectional area and width. Plates are thick products over 6mm, while sheets are thinner but wide, and strips are thin and narrow. Blooms, billets, and slabs are considered semi-finished products.
What's hot (19)
Similar to Paperhanning tools
Cons 127
This document discusses dry lining and plasterboard installation methods. Dry lining involves covering wall surfaces with sheet materials like plasterboard, strawboard or fiberboard to simplify construction, improve finishes and add insulation/fire resistance. The most common method uses plasterboard, which consists of a gypsum core sandwiched between paper liners. Plasterboards are installed by fixing them to timber battens, metal channels, or bonding them directly to the wall with an adhesive backing. Joints are treated and corners reinforced to create a smooth, even surface.
PARTITIONS AND ROOFING SHEETS
MODULAR ALUMINIUM PARTITION
MANUFACTURING PROCESS OF ALUMINIUM PARTITION
MATERIAL USED FOR ALUMINIUM PARTITION
FIXING DETAILES OF ALUMINIUM PARTITION
MARKET PRICES OF ALUMINIUM PARTIONS
TIMBER PARTITIONS
TYPES OF TIMBER PARTITIONS
MARKET PRICES OF IT
G.I. ROOFING SHEETS
TYPES, SIZES, COLOURS AVAILABLE
POLYCARBONATED SHEETS
TYPES, SIZES, COLOURS AVAILABLE,PRICES
SEWING TOOLS
The document discusses various sewing tools and their uses. It identifies measuring tools like tape measures, sewing gauges, rulers, yardsticks, and L-squares or tailor squares. Cutting tools include bent-handled dressmaker's shears, pinking shears, scissors, and rotary cutters. Marking tools include chalk pencils, liquid marking pens, tailor's chalk, and wax chalk. Other tools mentioned are pin cushions, needles, sewing needle threaders, thimbles, fabric, and thread. Each tool is described along with its purpose in sewing.
#2 Tools and Symbols in Pattern Drafting PPT.pptx
This document lists and describes various tools, materials and equipment used in sewing. It discusses measuring tools like tape measures and sewing gauges. It covers cutting tools such as shears, pinking shears and scissors. It also mentions other essential items like thread, fabric, pins, needles, thimbles and sewing machines. Finally, it provides details on pattern symbols to help with accurate cutting and sewing.
Laminates Veneers & Plywood
1. The document discusses different types of decorative surface materials like laminates, veneers, plywood and their manufacturing processes.
2. It explains the types of laminates based on manufacturing process and surface finish. The main types are low pressure, high pressure, matte finish, glossy finish, textured finish and digital laminates.
3. Veneers are thin wood sheets used for decorative purposes. The manufacturing process of veneers involves slicing logs, grading, trimming and joining. Common types are oak, teak, walnut and birch veneers.
4. Plywood is made of layers of wood pressed together with grains oriented perpendicular to each other. The manufacturing
Install lining, panelling and moulding - Linings presentation
Linings are internal coverings used in wall frames. Common lining materials include plasterboard, timber boards, plywood, and fiber cement sheeting. Plasterboard is made of a gypsum core with paper facing and comes in various widths and thicknesses. It is fixed with adhesive and screws or nails and finished with joint tape and compound before painting. Timber boards can be solid or veneered and are typically tongue and groove joined then painted. Proper storage of lining materials allows them to acclimate before installation.
Easy Drywall DIY Products
Easy Drywall Accessories Co., Limited is a Chinese manufacturer and supplier of drywall accessories and DIY products established in 2005. They supply high quality drywall joint tape, metal corner tape, wall patch, electrical outlet patch and other products to professional customers worldwide. Easy Drywall is committed to quality products, excellent service and working with customers to develop new products. They invite interested customers to contact their sales team to learn more about their reliable products and partnerships.
Welcome to Americo - 2015. Manufacturer of the highest quality non-woven abra...
Americo Manufacturing Company, headquartered in Acworth, Georgia is a leading manufacturer of sustainable products such as synthetic and natural fiber floor pads, hand pads,
utility pads and floor matting. 100% of the polyester fiber used in pads produced by Americo comes from recycled material from post industrial and post consumer waste and the only
binders used in their manufacturing process used in their manufacturing process are water based. Americo’s products are currently sold worldwide as the company enters into their 45th year of operation. For more information on Americo, visit
www.americomfg.com. For additional information regarding Americo's PromoMatting Division, visit www.promomatting.com.
.
Brochure May 15
Fulcrum Composites manufactures Curve, a lightweight composite material that is used as an alternative to drywall for creating tight corners and curved surfaces. Curve installs and finishes like drywall but is easier to work with on corners and curves. It comes in various sizes for inside corners, outside corners, columns, arches, and other curved applications.
d.pptx
Bamboo has several advantages as a building material including being earthquake proof, high strength yet light weight, elastic, and cost effective. However, it requires proper treatment to prevent issues like shrinkage, durability, and joint reliability. Splitting, shaping, and bending are common processing techniques. Bamboo can be used to construct walls, scaffolding, and other structures when joined properly without nails that may cause splitting. Ferrocement is a type of reinforced concrete made of cement, sand and closely spaced metal mesh that has high tensile strength but low shear strength. Hempcrete is a building material created by mixing hemp shiv, lime, and water to form a moldable composite used for walls, floors,
How to select the right chairmat from Brooker Business Products
This document provides information about selecting the appropriate chair mat for different flooring surfaces and carpet thicknesses. It discusses various chair mat features, including studded backs that grip carpet without damaging it, smooth edges for easy chair movement, and checkered backs for optimum carpet grip. It also provides tips for measuring carpet thickness and identifies mats suitable for low, medium, and high pile carpets as well as hard floors. The document emphasizes choosing the right mat to protect flooring and extend carpet life while providing smooth chair mobility.
Veneers and laminates
Veneers and laminates are thin materials used to cover surfaces. Veneers are thin slices of wood peeled from logs in layers less than 3mm thick. Laminates are made of layered papers soaked in resin and pressed together. Veneers can enhance the aesthetics of other materials like plywood, while laminates are more durable decorative surfaces not suitable for exterior use. Common types include teak, oak, maple, and ironwood veneers and high, low, and compact pressure laminates. They are graded and used in architectural applications like walls, furniture, and flooring.
Tools and Equipment
Tools and equipment are essential for plastering work. A variety of trowels, floats, hammers, and edging tools are used to apply and finish plaster depending on the task. Personal protective equipment must always be worn and tools must be properly maintained and stored between uses to work safely. Power tools like drills can also help mix materials and strip plaster more efficiently on large jobs.
Hand Tools Practise - Mechanical.ppt for training and awareness in industries
Files are cutting tools used to remove metal from surfaces. They come in various sizes and shapes for different operations. Files have different lengths, sections, cuts, and grades. Common sections include flat, square, round, half round, triangular, and knife edge. Cuts include single, double, rasp and curved. Grades range from rough to dead smooth. Vices are tools used to securely hold workpieces for operations and come in types like bench, leg, pipe, hand, machine and pin.
Flooring and it's Types
Selection of Materials for Flooring
Types of Flooring:
1. Seamless Chemical Flooring
2 Marble Flooring
3. Brick Flooring
4. Glass Flooring
5. Stone Flooring
6. Rubber Flooring
TYPES OF FLOORING MATERIALS
are horizontal elements of building structures which divide building into different levels for the purpose of creating more accommodation with in the restricted space, one above the other and also provide support to the occupants, furniture and equipment of a building.
florring ppt.pdf
The document discusses different types of flooring materials including natural materials like mud, timber, stone, and man-made materials like concrete, metal, and tiles. It provides details on various stone flooring options like marble, granite, and ceramic tiles. Marble flooring has advantages like being available in many colors and patterns, adding radiance, and being durable; but it has disadvantages like getting cold in winter and being expensive. Selection of flooring depends on factors like initial cost, appearance, durability, and maintenance requirements.
Tutor l1 basic tools
This document lists and describes common tools and equipment used in bricklaying. It includes trowels, hammers, chisels, levels, squares and other tools used for measuring, marking, cutting, shaping and finishing bricks and mortar. Key tools discussed are walling and pointing trowels, brick hammers, lump hammers, bolster chisels, spirit levels, lines and pins, and half round jointing tools. Details provided include typical materials used for handles, common styles or uses, and safety tips for proper use.
Packaging & Warehouse Sale
Shipping Department Essentials to get all your Goods out the Door! Safety Cutters, Seals and Tensioners plus Packaging Products.
Gypsum Board(internal finish)
This document summarizes the use of gypsum board for interior finishes. It discusses that gypsum board consists of a noncombustible gypsum core with paper facing. Gypsum board is used for partitions, walls, ceilings and floors due to its ease of installation, fire resistance, sound isolation, durability and versatility. It describes the different types of gypsum board including standard, channel, and ceiling boards. The document outlines the tools used to cut, shape and install gypsum board and the procedures for application.
Similar to Paperhanning tools (20)
Install lining, panelling and moulding - Linings presentation
Install lining, panelling and moulding - Linings presentation
Welcome to Americo - 2015. Manufacturer of the highest quality non-woven abra...
Welcome to Americo - 2015. Manufacturer of the highest quality non-woven abra...
How to select the right chairmat from Brooker Business Products
How to select the right chairmat from Brooker Business Products
Hand Tools Practise - Mechanical.ppt for training and awareness in industries
Hand Tools Practise - Mechanical.ppt for training and awareness in industries
More from michael mcewan
Colour theory presentation
The document discusses color theory as it relates to painting and decorating. It defines primary colors as red, yellow, and blue. Secondary colors are produced by mixing two primary colors - orange from red and yellow, purple from red and blue, and green from blue and yellow. A color circle or chromatic circle arranges all the colors in a circle with primary, secondary, and intermediate colors. Color schemes include monochromatic using one color, complementary using opposite colors, analogous using adjacent colors, and contrasting using different colors from anywhere on the wheel. Neutrals are grey mixtures of black and white while tints add white, shades add black, and tones add grey to colors.
Colour schemes lesson 2
Hue refers to the basic colour, such as red, blue, yellow, etc. BS 4800 is the British Standard for colour coordination. It contains 100 colours divided into categories based on hue, greyness, and tone. Colour schemes can be warm/advancing using red, yellow and orange hues, or cool/receding using blue and green hues. Monochromatic schemes use tints and shades of a single hue. Harmonious schemes use analogous or related hues. Complementary schemes pair hues directly opposite each other on the colour wheel.
Colour schemes lesson 1
This document provides an introduction to color schemes and color theory. It discusses the following key points in 3 sentences:
The document begins by explaining that color is derived from light and defines white light as originating from the sun. It describes how Isaac Newton showed that sunlight is made up of a spectrum of colors. The learning outcomes cover topics like the color wheel, how humans perceive color, and how color is affected by artificial lighting sources.
appreciation_of_access_platforms_and_equipment
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Steps and working platforms
This document discusses safety requirements for various types of access equipment commonly used in construction, including stepladders, ladders, trestle platforms, scaffolding, and fall protection. It provides brief descriptions of stepladders, ladders, trestle platforms, mobile tower scaffolds, and asks questions about safety checks and regulations that should be considered for each type of equipment prior to use.
Health and safety
This document discusses several important topics in workplace health and safety:
- The Health and Safety at Work Act establishes duties for employers and employees to protect worker and public safety.
- The Control of Substances Hazardous to Health Regulations provide guidelines for handling hazardous materials safely.
- Proper safety procedures and personal protective equipment are necessary for tasks like manual handling, working with fire or electricity, and working at heights to prevent accidents.
- First aid training and supplies, accident reporting, and risk assessments are required to ensure worker health and safety.
Painting & Decorating induction
This document provides information for students in the Painting & Decorating program at City of Glasgow College. It outlines the daily class schedule, student rights and obligations, required personal protective equipment, fire evacuation procedures, library hours, information about the student association and computer/parking access. Safety is a priority, as students must wear proper protective gear like steel-toe boots and follow all health and safety rules while in the workshop.
Wallpaper history
Wallpaper has been used for interior decoration since ancient times. The earliest forms of paper were developed in China in the 2nd century BC and papermaking spread from there to the Middle East and Europe over subsequent centuries. By the 16th century, wallpaper with printed repetitive patterns was being produced in Europe. Throughout the 18th and 19th centuries, innovations such as machine printing allowed wallpaper manufacturing to scale up and designs to become more intricate, making wallpaper a widespread decorative feature in homes.
Paperhanning tools
Paperhanging tools include brushes, shears, rules, paste boards, plumb bobs, seam rollers, trimming knives, wall brushes, buckets, and sponges. These tools are used for measuring, cutting, applying, and smoothing wallpaper and fabrics on walls and ceilings. Proper cleaning and storage helps maintain the tools.
Patterned paper power point
This document provides information on preparing surfaces, lining paper, wallboards, previously painted surfaces, filling cracks and holes, mould growth, new plaster, stripping wallpaper, tools and equipment, pastes and adhesives, paste consistency, how wallpaper is manufactured including screen printing, hand block printing, machine printing and embossing, types of wallpaper including grounds, machine prints, hand prints, embossed papers, wet embossed paper, washable papers, coated washable papers, wood grain, metallic folis and expanded polystyrene.
Paperhanning
The document discusses various techniques for hanging wallpaper, including:
- Marking starting points and using a plumb line for vertical hangs
- Hanging paper vertically in lengths, keeping it folded at first
- Hanging paper horizontally by measuring positions and cross-lining
- Hanging paper on ceilings using concertina folds and working away from light sources
- Hanging paper around windows by starting on one side and working across
Paint application
This document provides instructions and explanations for various painting and decorating techniques:
- It describes how to properly load a brush by coating the bristles and tapping off excess paint, being careful not to get paint on the handle.
- Different techniques are covered like cutting in, laying off brush strokes, applying paint with rollers, cleaning brushes, and special effects like rag rolling, sponging, stippling and stenciling.
- Specific instructions are given for techniques like graining, marbling, textured painting, gilding, and how to prevent defects when gilding.
Colour
The document discusses color wheels and color terminology. A color wheel is a diagram that displays primary, secondary, and sometimes tertiary colors in a radial pattern. It was first discovered in 1672. There are many terms connected to color, including hue (the name of the color), tint (a color made lighter by adding white), shade (a color made darker by adding black), and value (lightness or darkness of a color). The BS 4800 series is a coding system that identifies colors using a code with three parts representing hue, greyness, and weight or lightness.
Surface coatings
Surface coatings are applied to materials like steel and timber to protect them from corrosion and rotting, to decorate surfaces and add special effects, and to sanitize items by making them easier to clean. Paint consists of a thinner, binder, and pigment and dries through the processes of evaporation, oxidation, and coalescence as the binder particles fuse together into a film. When mixing a two-part coating, it is important to follow the manufacturer's recommendations on ratios and be aware of the mixture's pot life, which refers to the usable life of the mixture before it starts to cure and become unusable.
Preparing and painting surfaces
This document discusses different types of surface coatings used in painting. It describes primers, undercoats, gloss, eggshell, emulsion, acrylic, and varnish paint finishes. It provides instructions for preparing various surfaces like walls, wood, and old paintwork for painting. Walls should be protected with dustsheets and loose plaster removed before painting. New wood requires sanding, knotting, and filler while old paint needs flaking paint removed and sanding to prepare for new coats.
Protection
Dustsheets made of polythene or canvas should be used to protect furniture, floors, and other items from dust and splashes of paint when decorating. Polythene sheeting can be used to cover floors and protect vehicles, windows, and other items that cannot be removed from the work area. Tenting in with scaffolding and polythene sheeting cordons off an area for spray painting.
Surface coatings
Surface coatings are applied to materials like steel and timber to protect them from corrosion and rotting, to decorate surfaces and add special effects, and to sanitize items by making them easier to clean. Paint consists of a thinner, binder, and pigment and dries through the processes of evaporation, oxidation, and coalescence as the binder particles fuse together into a film. When mixing a two-part coating, it is important to follow the manufacturer's recommendations on ratios and be aware of the mixture's pot life, which refers to the usable life of the mixture before it starts to cure and become unusable.
Surface & Tin defects
This document discusses various types of painting and tin defects including surface defects, internal paint failures, external paint defects, and defects in tin that can occur. It focuses on identifying and addressing issues that may arise with paint and tin coatings.
Surface defects
This document provides information on various surface defects and how to repair them. It discusses removing rust by hand or power tools, treating friable surfaces before painting, removing mould growth, repairing defective puttying and plasterboard, dealing with efflorescence on cement, repairing damaged rendering, and properly applying caulk. The key is to prepare surfaces thoroughly, use the right tools for each job, and avoid over-polishing or damaging the surface further during repairs.
Health and safety
This document discusses several important topics in workplace health and safety:
- The Health and Safety at Work Act establishes duties for employers and employees to protect worker and public safety.
- The Control of Substances Hazardous to Health Regulations provide guidelines for handling hazardous materials safely.
- Proper safety techniques and personal protective equipment are necessary for tasks like manual handling, working at heights, and using hazardous substances to prevent injuries.
- Other important safety practices covered include first aid, accident reporting, use of safety signs, fire safety, and conducting risk assessments. Following these procedures helps create a safe working environment.
More from michael mcewan (20)
Recently uploaded
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Paperhanning tools
- 1. © City of Glasgow College Charity Number SC0 36198 Paperhanging Tools
- 2. Paperhanging Brush • Made of white or grey bristle, or synthetic filaments set in rubber • Size from 200 mm to 250 mm wide • Used to apply papers & fabrics to walls and ceilings • After use, wash in soap & tepid water & allow to dry
- 3. Paperhanging Shears • Made of polished steel or stainless steel • Size from 250 mm to 300 mm long • Used to cut lengths & trim at angles & around obstacles • Keep clean & sharp. Never clean with abrasive paper as it will blunt cutting edge. Store dry to prevent rusting
- 4. Rule • One metre rule, made from plastic or boxwood, and folded into 4 section • Used for measuring areas, lengths & widths
- 5. Paste Board • Made from wood and is usually foldable for easy transportation. Should be firm. • Size 1.830 m long x 560 mm wide • Used for measuring, cutting, matching & pasting of wallcoverings • Keep face & edges free from paste
- 6. Plumb Bob • A small weight suspended on string • Used to check that the first length of surface covering on every wall is upright
- 7. Seam Roller • Made from hardwood. Side arm or double arm fitting • Size 25mm and 37mm wide • Used to roll down edges of paper at seams & angles • Keep clean & lubricate sparingly
- 8. Trimming Knife • Available with retractable or replacement blades • Used for cutting / trimming at angles & around obstacles • Keep blade sharp, or replace regularly
- 9. Wall brush • Available in a wide range of varying quality including pure bristle & man made filaments. • Size from 100 mm to 175 mm wide • Used to apply adhesive to wallcoverings
- 10. Bucket • Made from galvanised steel or plastic • Size from 7 litres up to 14 litres • Used to hold water, washing solution or wallpaper paste
- 11. Sponge • Synthetic sponge, used for washing down, and removing paste from surfaces.