Ofil's Daytime Corona Camera
•
2 likes•1,881 views
Ofil manufactures daytime corona cameras with DayCor® technology inside. Ofil's cameras are non-destructive and non-intrusive bi-spectral UV-Visible with high sensitivity to UV spectral range. Ofil's cameras detect corona and pinpoint the emitting sources. Used worldwide by thousands of predictive maintenance teams.dOfil manufactures daytime corona cameras with bispectral UV-Visible sensors that detect corona and its emmiting sources.
Report
Share
Report
Share
![Daytime ,[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Comparison of overhead and underground transmission lines
Overhead transmission lines and underground cables both have advantages and disadvantages for transmitting electric power over long distances. Overhead lines are cheaper to install and maintain but are vulnerable to weather damage, while underground cables are more reliable but significantly more expensive. The choice between overhead and underground transmission depends on technical, economic and environmental factors for each specific situation.
Circuit breaker
The document discusses different types of circuit breakers, including air blast, vacuum, oil, and SF6 circuit breakers. It explains that a circuit breaker can make, carry, and break currents under normal and abnormal circuit conditions. The operating mechanism involves using stored energy to move a moving contact to open or close the circuit. When contacts separate during a fault, an arc is formed that must be quickly quenched for circuit interruption. Each breaker type uses a different medium, such as air, vacuum, oil or SF6 gas, to rapidly cool and extinguish the arc. Modern systems commonly use vacuum or SF6 breakers for their fast, reliable performance.
Geothermal power plant
1) Geothermal energy is energy extracted from heat stored in the earth, derived from tectonic activity and solar thermal energy absorbed at the earth's surface.
2) There are three main types of geothermal power plants - dry steam, flash steam, and binary cycle. Dry steam plants use steam directly from reservoirs, while flash steam plants create steam by lowering pressure on hot water. Binary cycle plants use a secondary fluid to extract heat without contacting the geothermal fluid.
3) Indonesia operates several geothermal power plants across the country, with the largest being the Wayang Windu plant with a total capacity of 400 MW. Geothermal energy produces less carbon
Electric power substation
1. An electric power substation is a facility used to transform electricity from high to low voltage or vice versa for transmission or distribution. It contains equipment like transformers, circuit breakers, and switches.
2. Substations are used to connect generators and transmission lines, transform power between voltage levels, interconnect power sources, switch connections, control voltage and power flow, and detect and respond to faults on the system.
3. They are classified by their main function as transmission substations for high voltages or distribution substations for low voltages. Transformer substations contain transformers while switching substations focus on connections.
Geothermal Energy
Geothermal energy involves extracting heat from underground and using it to generate electricity or for direct uses like heating and cooling. There are various methods to extract geothermal energy depending on the underground temperature, including dry steam, flash steam, binary cycle, and hot dry rock technology. While geothermal energy has environmental advantages over fossil fuels, development costs are high due to exploration and drilling risks. However, operating costs are low as the fuel source is constant. Geothermal energy provides baseload power and is most economically viable in locations with suitable underground temperatures near the Earth's tectonic plate boundaries.
Transformer testing
The document describes how to conduct short circuit and open circuit tests on transformers using a DPATT-3Bi device to measure copper and iron losses, respectively. It provides details on the test setups, calculations for full load current and no load current, and how to interpret the results displayed on the DPATT-3Bi screen. The document also lists standard limits for transformer impedance voltages and losses according to Indian standards.
A2.34+transformer+maintenance+tutorial
This document provides a tutorial on transformer maintenance best practices. It outlines a maintenance strategy, process, and considerations for component selection and maintenance. The maintenance strategy discusses factors that influence maintenance practices such as transformer characteristics, duty, and environment. It also presents results from a survey on current maintenance practices. The maintenance process covers planning, organization, execution, recording, and optimization. Levels of competence for maintenance tasks and safety aspects are discussed. Component selection impacts maintenance effort, and considerations for various transformer components are provided.
Types of power plants
There are several types of power plants that generate electricity from different energy sources. Power plants can be categorized based on their fuel or input energy, including coal thermal power plants, hydraulic power plants, nuclear power plants, geothermal power plants, solar power plants, wind power plants, and biomass power plants. Coal thermal power plants generate electricity by burning coal to produce steam that spins turbines connected to generators. Hydraulic power plants use the kinetic energy of falling or flowing water to spin turbines and generate electricity. Nuclear power plants produce heat from nuclear fission in a reactor that converts water to high-pressure steam to spin turbines.
Recommended
Comparison of overhead and underground transmission lines
Overhead transmission lines and underground cables both have advantages and disadvantages for transmitting electric power over long distances. Overhead lines are cheaper to install and maintain but are vulnerable to weather damage, while underground cables are more reliable but significantly more expensive. The choice between overhead and underground transmission depends on technical, economic and environmental factors for each specific situation.
Circuit breaker
The document discusses different types of circuit breakers, including air blast, vacuum, oil, and SF6 circuit breakers. It explains that a circuit breaker can make, carry, and break currents under normal and abnormal circuit conditions. The operating mechanism involves using stored energy to move a moving contact to open or close the circuit. When contacts separate during a fault, an arc is formed that must be quickly quenched for circuit interruption. Each breaker type uses a different medium, such as air, vacuum, oil or SF6 gas, to rapidly cool and extinguish the arc. Modern systems commonly use vacuum or SF6 breakers for their fast, reliable performance.
Geothermal power plant
1) Geothermal energy is energy extracted from heat stored in the earth, derived from tectonic activity and solar thermal energy absorbed at the earth's surface.
2) There are three main types of geothermal power plants - dry steam, flash steam, and binary cycle. Dry steam plants use steam directly from reservoirs, while flash steam plants create steam by lowering pressure on hot water. Binary cycle plants use a secondary fluid to extract heat without contacting the geothermal fluid.
3) Indonesia operates several geothermal power plants across the country, with the largest being the Wayang Windu plant with a total capacity of 400 MW. Geothermal energy produces less carbon
Electric power substation
1. An electric power substation is a facility used to transform electricity from high to low voltage or vice versa for transmission or distribution. It contains equipment like transformers, circuit breakers, and switches.
2. Substations are used to connect generators and transmission lines, transform power between voltage levels, interconnect power sources, switch connections, control voltage and power flow, and detect and respond to faults on the system.
3. They are classified by their main function as transmission substations for high voltages or distribution substations for low voltages. Transformer substations contain transformers while switching substations focus on connections.
Geothermal Energy
Geothermal energy involves extracting heat from underground and using it to generate electricity or for direct uses like heating and cooling. There are various methods to extract geothermal energy depending on the underground temperature, including dry steam, flash steam, binary cycle, and hot dry rock technology. While geothermal energy has environmental advantages over fossil fuels, development costs are high due to exploration and drilling risks. However, operating costs are low as the fuel source is constant. Geothermal energy provides baseload power and is most economically viable in locations with suitable underground temperatures near the Earth's tectonic plate boundaries.
Transformer testing
The document describes how to conduct short circuit and open circuit tests on transformers using a DPATT-3Bi device to measure copper and iron losses, respectively. It provides details on the test setups, calculations for full load current and no load current, and how to interpret the results displayed on the DPATT-3Bi screen. The document also lists standard limits for transformer impedance voltages and losses according to Indian standards.
A2.34+transformer+maintenance+tutorial
This document provides a tutorial on transformer maintenance best practices. It outlines a maintenance strategy, process, and considerations for component selection and maintenance. The maintenance strategy discusses factors that influence maintenance practices such as transformer characteristics, duty, and environment. It also presents results from a survey on current maintenance practices. The maintenance process covers planning, organization, execution, recording, and optimization. Levels of competence for maintenance tasks and safety aspects are discussed. Component selection impacts maintenance effort, and considerations for various transformer components are provided.
Types of power plants
There are several types of power plants that generate electricity from different energy sources. Power plants can be categorized based on their fuel or input energy, including coal thermal power plants, hydraulic power plants, nuclear power plants, geothermal power plants, solar power plants, wind power plants, and biomass power plants. Coal thermal power plants generate electricity by burning coal to produce steam that spins turbines connected to generators. Hydraulic power plants use the kinetic energy of falling or flowing water to spin turbines and generate electricity. Nuclear power plants produce heat from nuclear fission in a reactor that converts water to high-pressure steam to spin turbines.
Transmission & distribution of electrical power
This document provides an overview of the course "Transmission & Distribution of Electrical Power" which is divided into 8 modules. Module I introduces basics of power transmission including the necessity of transmitting electricity over long distances at high voltages to reduce losses. It also covers classifications of different transmission systems. Subsequent modules cover components of transmission lines such as conductors, insulators, and their characteristics as well as transmission line parameters and performance. Later modules address extra high voltage transmission, distribution system components, underground cables, and substations.
Circuit breakers
This document summarizes a seminar on circuit breakers. It discusses the working principles of circuit breakers, including arc phenomenon and methods of arc extinction. It also covers terms related to circuit breakers and different types of circuit breakers such as oil, air blast, sulfur hexafluoride, and vacuum circuit breakers. For each type, it provides details on principles of operation, advantages, disadvantages, and applications. The document concludes that the seminar helped gather new information about circuit breakers and their role in power systems.
Insulation coordination
This presentation discusses insulation coordination in power systems. It introduces insulation coordination and its purpose to determine necessary insulation characteristics to withstand normal and over voltages. The presentation covers the basic insulation level (BIL) process, which establishes a common insulation level for all system components. It also describes the insulation coordination process, which involves understanding insulation stresses and strengths, controlling stresses, and designing insulation systems. The presentation concludes that insulation coordination balances equipment reliability and costs by properly matching insulation strength to system stresses.
Fire protection in thermal power station
This document provides an overview of fire protection recommendations for a thermal power plant. It identifies various areas of the plant and their associated fire risks. Recommendations are provided for both automatic and manual fire suppression systems in each area, including the coal yard, coal conveyor, boiler, turbine, cable gallery, electrical panel, central control room, transformer, lube oil tank, and switchyard. Detection methods and extinguishing agents are suggested based on the class of fire risk. The document also recommends an early warning manual call point fire alarm system, portable extinguishers, and water hydrant systems to provide common fire protection across the entire plant. Drawings, calculations and cost estimates would be prepared as part of the survey,
Earthing Arrangements 17th
The document discusses earthing arrangements and protection against electric shock. It covers the basics of shock protection using Class I and Class II equipment. It then summarizes the three main earthing arrangements: TT, TN-S, and TN-C-S. The TT arrangement uses separate earth electrodes at the supply and installation. The TN-S uses a common earth at the supply but separate earth and neutral conductors at the installation. The TN-C-S, also known as PME, uses a combined earth and neutral conductor on the supply side and separate conductors at the installation.
A Training Report Of Saltlake 132/33kv Substation
This document provides a summary of a report on winter training at a 132/33kV substation in West Bengal, India. It defines an electrical substation and introduces the 132/33kV substation. It describes key equipment found at the substation, including busbars, insulators, isolating switches, circuit breakers, protective relays, transformers, direct lightning stroke protection, line isolators, wave traps, and metering instruments. It also discusses site selection, layout, insulation coordination, and common transformer faults and protection schemes.
Electricity generation, distribution and transmission
COMSATS Institute of Information and Technology, Sahiwal
Department of Electrical Engineering
Prepared By: Umaiz Ahmad and Yasir Zulfiqar
CONTACT:
+92-321-7899091
+92-336-0006247
Introduction to power transformers
Transformers are an essential part of the electricity network: they convert electrical energy from one voltage level to another. This course is introducing the subject of transformers. The intention of the whole series is to promote lifecycle thinking when procuring transformers. Therefore, the focus will be on energy performance, reliability, asset management
**Lightning Arrester Presentation**
This document summarizes types of lightning arresters, their classification, identification, standard ratings, and service conditions. There are three main types of arresters: expulsion, valve, and gapless metal-oxide. Arresters are classified into four classes based on their nominal discharge current and use: station, intermediate, distribution, and secondary. Arresters must be properly identified and can operate under normal conditions of temperature, radiation, altitude, and frequency, but may require special consideration under abnormal conditions.
Hydro power-plant
The document provides information about hydro power, including its history, types of hydro power plants, components and working, and case study of Hirakund Dam in India. Some key points:
1) Hydropower harnesses the kinetic energy of flowing water and is considered renewable as water sources are replenished.
2) Types of hydro power plants include run-of-river, reservoir, and classifications based on head of water and load.
3) Hirakund Dam is the longest earthen dam in the world located in India. It displaced over 22,000 families but provides irrigation and nearly 300MW of power.
Bil and insulation coordination ppt
The selection of suitable values for the insulation levels of the various components in any electrical system and their arrangement in a rational manner is called insulation coordination.
The insulation level of an apparatus is defined as that combination of voltage values (both power frequency and impulse) which characterize it insulation with regard to its capability of withstanding the dielectric stress
Time current curves
A protective device coordination study involves organizing the time-current characteristics of protective devices from the utility to downstream devices. The study determines device ratings, settings, and ensures minimum load is interrupted during faults while protecting devices. Results include instrument transformer ratios, relay settings, fuse ratings, and circuit breaker ratings. The study should be revised every 5 years or when devices are added or modified.
Power cable - Voltage drop
This document discusses voltage drop calculation in cable lines. It provides information on the data required to start calculations, including cable parameters, load characteristics, installation scheme, and maximum allowed voltage drop. It then covers calculations for simple radial lines under conditions of constant current and constant power. For constant current, the voltage drop is calculated based on cable resistance and reactance, line length, and load current. For constant power, an iterative method is used to calculate the voltage at the end of the line based on load power and reactive power. Sample calculations are shown for both cases.
Protection Relays Numbering (ANSI)
This document lists standard electrical power system device function numbers from ANSI C37.2. It includes 99 device functions numbered 1 through 99 with descriptions such as master element, time-delay starting or closing relay, AC time overcurrent relay, AC circuit breaker, exciter or DC generator relay, and machine or transformer thermal relay.
Power Transformer Protection
How is power transformer protected??? This provides a basic understanding of power transformer. Furthermore, the protective relay application on power transformer is included.
Estimation of solar energy
This document discusses techniques for estimating solar energy. It begins by explaining the importance of accurate solar energy estimation for energy planners and utilities. It then describes three types of estimation horizons: very short term, short term, and long term prediction. Next, it outlines linear and nonlinear estimation techniques, including the Angstrom and Angstrom-Prescott models for linear regression. It focuses on the use of neural networks for short term estimation, noting their ability to model complex nonlinear relationships without extensive data or prior model specification. Finally, it provides examples of neural networks being used to estimate solar irradiance up to 24 hours ahead and assess solar potential in the Himalayan region.
Switchyard
This document provides an overview of the electrical equipment found in a switchyard at an NTPC power plant, including transformers, conductors, insulators, isolators, busbars, lightning arresters, circuit breakers, relays, and capacitor banks. It describes the purpose and basic functioning of each type of equipment, such as how transformers change voltage levels, current transformers reduce current readings, conductors transmit power, and relays and circuit breakers disconnect faulty circuits. The document also notes that new technologies like SCADA allow remote control and monitoring of substations.
Cable Sizing Calculations
This document discusses cable sizing calculations and techniques. It explains that proper cable sizing is important to ensure efficient, safe and economic transmission of electrical energy without interruptions or exceeding the cable's limits. The document outlines the common steps for cable sizing: 1) gathering data on the cable, load and installation conditions, 2) determining the minimum size based on current capacity, voltage drop, temperature rise and fault impedance, and 3) selecting the optimally sized cable. Several examples are provided to illustrate implementing the cable selection process. Risks of improper sizing like voltage drops, overheating and shorter lifespan are also summarized.
Electrical grounding and earthing
The document presents information on earthing systems. It discusses the functions of earthing, which include providing a path for fault currents and protection from electric shock. It describes common methods of earthing like plate, pipe, and rod earthing. It also discusses types of earthing systems, applications of earthing, and concludes that grounding and earthing systems provide important protection for electrical systems.
IEEE substation design
This document discusses high voltage substation design, applications, and considerations. It provides an overview of substation basics, electrical configurations, physical design, protection and controls, and coordination of design and construction. The presentation covers typical substation voltage levels, configurations such as ring bus and breaker-and-a-half, factors to consider in the design process such as service conditions and studies required, and reliability comparisons of different configurations. Design guidelines for spacing and clearances are also presented.
DayCor(R) Scalar
DayCor Scalar is a handheld compact corona camera for indoors inspection of corona, arcing and sparks. The camera provides video and stills capturing, play-back, wide field of view, large LCD and built in flashlight. Operation is simple and easy. High Value low cost.
Ofil DayCor(R) Luminar
An outstanding NDT - Non Destructive Testing equipment that pinpoints corona emitting sources in full daylight and denotes discharge severity. Luminar is designed to maximize the efficiency and productivity of predictive maintenance engineers by concentrating on functionality and relevant output. It is a powerful tool with DayCor® technology embedded and enhanced optical and display features. Luminar, the latest addition to Ofil’s range of products, brings an innovative approach to corona detection.
More Related Content
What's hot
Transmission & distribution of electrical power
This document provides an overview of the course "Transmission & Distribution of Electrical Power" which is divided into 8 modules. Module I introduces basics of power transmission including the necessity of transmitting electricity over long distances at high voltages to reduce losses. It also covers classifications of different transmission systems. Subsequent modules cover components of transmission lines such as conductors, insulators, and their characteristics as well as transmission line parameters and performance. Later modules address extra high voltage transmission, distribution system components, underground cables, and substations.
Circuit breakers
This document summarizes a seminar on circuit breakers. It discusses the working principles of circuit breakers, including arc phenomenon and methods of arc extinction. It also covers terms related to circuit breakers and different types of circuit breakers such as oil, air blast, sulfur hexafluoride, and vacuum circuit breakers. For each type, it provides details on principles of operation, advantages, disadvantages, and applications. The document concludes that the seminar helped gather new information about circuit breakers and their role in power systems.
Insulation coordination
This presentation discusses insulation coordination in power systems. It introduces insulation coordination and its purpose to determine necessary insulation characteristics to withstand normal and over voltages. The presentation covers the basic insulation level (BIL) process, which establishes a common insulation level for all system components. It also describes the insulation coordination process, which involves understanding insulation stresses and strengths, controlling stresses, and designing insulation systems. The presentation concludes that insulation coordination balances equipment reliability and costs by properly matching insulation strength to system stresses.
Fire protection in thermal power station
This document provides an overview of fire protection recommendations for a thermal power plant. It identifies various areas of the plant and their associated fire risks. Recommendations are provided for both automatic and manual fire suppression systems in each area, including the coal yard, coal conveyor, boiler, turbine, cable gallery, electrical panel, central control room, transformer, lube oil tank, and switchyard. Detection methods and extinguishing agents are suggested based on the class of fire risk. The document also recommends an early warning manual call point fire alarm system, portable extinguishers, and water hydrant systems to provide common fire protection across the entire plant. Drawings, calculations and cost estimates would be prepared as part of the survey,
Earthing Arrangements 17th
The document discusses earthing arrangements and protection against electric shock. It covers the basics of shock protection using Class I and Class II equipment. It then summarizes the three main earthing arrangements: TT, TN-S, and TN-C-S. The TT arrangement uses separate earth electrodes at the supply and installation. The TN-S uses a common earth at the supply but separate earth and neutral conductors at the installation. The TN-C-S, also known as PME, uses a combined earth and neutral conductor on the supply side and separate conductors at the installation.
A Training Report Of Saltlake 132/33kv Substation
This document provides a summary of a report on winter training at a 132/33kV substation in West Bengal, India. It defines an electrical substation and introduces the 132/33kV substation. It describes key equipment found at the substation, including busbars, insulators, isolating switches, circuit breakers, protective relays, transformers, direct lightning stroke protection, line isolators, wave traps, and metering instruments. It also discusses site selection, layout, insulation coordination, and common transformer faults and protection schemes.
Electricity generation, distribution and transmission
COMSATS Institute of Information and Technology, Sahiwal
Department of Electrical Engineering
Prepared By: Umaiz Ahmad and Yasir Zulfiqar
CONTACT:
+92-321-7899091
+92-336-0006247
Introduction to power transformers
Transformers are an essential part of the electricity network: they convert electrical energy from one voltage level to another. This course is introducing the subject of transformers. The intention of the whole series is to promote lifecycle thinking when procuring transformers. Therefore, the focus will be on energy performance, reliability, asset management
**Lightning Arrester Presentation**
This document summarizes types of lightning arresters, their classification, identification, standard ratings, and service conditions. There are three main types of arresters: expulsion, valve, and gapless metal-oxide. Arresters are classified into four classes based on their nominal discharge current and use: station, intermediate, distribution, and secondary. Arresters must be properly identified and can operate under normal conditions of temperature, radiation, altitude, and frequency, but may require special consideration under abnormal conditions.
Hydro power-plant
The document provides information about hydro power, including its history, types of hydro power plants, components and working, and case study of Hirakund Dam in India. Some key points:
1) Hydropower harnesses the kinetic energy of flowing water and is considered renewable as water sources are replenished.
2) Types of hydro power plants include run-of-river, reservoir, and classifications based on head of water and load.
3) Hirakund Dam is the longest earthen dam in the world located in India. It displaced over 22,000 families but provides irrigation and nearly 300MW of power.
Bil and insulation coordination ppt
The selection of suitable values for the insulation levels of the various components in any electrical system and their arrangement in a rational manner is called insulation coordination.
The insulation level of an apparatus is defined as that combination of voltage values (both power frequency and impulse) which characterize it insulation with regard to its capability of withstanding the dielectric stress
Time current curves
A protective device coordination study involves organizing the time-current characteristics of protective devices from the utility to downstream devices. The study determines device ratings, settings, and ensures minimum load is interrupted during faults while protecting devices. Results include instrument transformer ratios, relay settings, fuse ratings, and circuit breaker ratings. The study should be revised every 5 years or when devices are added or modified.
Power cable - Voltage drop
This document discusses voltage drop calculation in cable lines. It provides information on the data required to start calculations, including cable parameters, load characteristics, installation scheme, and maximum allowed voltage drop. It then covers calculations for simple radial lines under conditions of constant current and constant power. For constant current, the voltage drop is calculated based on cable resistance and reactance, line length, and load current. For constant power, an iterative method is used to calculate the voltage at the end of the line based on load power and reactive power. Sample calculations are shown for both cases.
Protection Relays Numbering (ANSI)
This document lists standard electrical power system device function numbers from ANSI C37.2. It includes 99 device functions numbered 1 through 99 with descriptions such as master element, time-delay starting or closing relay, AC time overcurrent relay, AC circuit breaker, exciter or DC generator relay, and machine or transformer thermal relay.
Power Transformer Protection
How is power transformer protected??? This provides a basic understanding of power transformer. Furthermore, the protective relay application on power transformer is included.
Estimation of solar energy
This document discusses techniques for estimating solar energy. It begins by explaining the importance of accurate solar energy estimation for energy planners and utilities. It then describes three types of estimation horizons: very short term, short term, and long term prediction. Next, it outlines linear and nonlinear estimation techniques, including the Angstrom and Angstrom-Prescott models for linear regression. It focuses on the use of neural networks for short term estimation, noting their ability to model complex nonlinear relationships without extensive data or prior model specification. Finally, it provides examples of neural networks being used to estimate solar irradiance up to 24 hours ahead and assess solar potential in the Himalayan region.
Switchyard
This document provides an overview of the electrical equipment found in a switchyard at an NTPC power plant, including transformers, conductors, insulators, isolators, busbars, lightning arresters, circuit breakers, relays, and capacitor banks. It describes the purpose and basic functioning of each type of equipment, such as how transformers change voltage levels, current transformers reduce current readings, conductors transmit power, and relays and circuit breakers disconnect faulty circuits. The document also notes that new technologies like SCADA allow remote control and monitoring of substations.
Cable Sizing Calculations
This document discusses cable sizing calculations and techniques. It explains that proper cable sizing is important to ensure efficient, safe and economic transmission of electrical energy without interruptions or exceeding the cable's limits. The document outlines the common steps for cable sizing: 1) gathering data on the cable, load and installation conditions, 2) determining the minimum size based on current capacity, voltage drop, temperature rise and fault impedance, and 3) selecting the optimally sized cable. Several examples are provided to illustrate implementing the cable selection process. Risks of improper sizing like voltage drops, overheating and shorter lifespan are also summarized.
Electrical grounding and earthing
The document presents information on earthing systems. It discusses the functions of earthing, which include providing a path for fault currents and protection from electric shock. It describes common methods of earthing like plate, pipe, and rod earthing. It also discusses types of earthing systems, applications of earthing, and concludes that grounding and earthing systems provide important protection for electrical systems.
IEEE substation design
This document discusses high voltage substation design, applications, and considerations. It provides an overview of substation basics, electrical configurations, physical design, protection and controls, and coordination of design and construction. The presentation covers typical substation voltage levels, configurations such as ring bus and breaker-and-a-half, factors to consider in the design process such as service conditions and studies required, and reliability comparisons of different configurations. Design guidelines for spacing and clearances are also presented.
What's hot (20)
Transmission & distribution of electrical power
Transmission & distribution of electrical power
Electricity generation, distribution and transmission
Electricity generation, distribution and transmission
Viewers also liked
DayCor(R) Scalar
DayCor Scalar is a handheld compact corona camera for indoors inspection of corona, arcing and sparks. The camera provides video and stills capturing, play-back, wide field of view, large LCD and built in flashlight. Operation is simple and easy. High Value low cost.
Ofil DayCor(R) Luminar
An outstanding NDT - Non Destructive Testing equipment that pinpoints corona emitting sources in full daylight and denotes discharge severity. Luminar is designed to maximize the efficiency and productivity of predictive maintenance engineers by concentrating on functionality and relevant output. It is a powerful tool with DayCor® technology embedded and enhanced optical and display features. Luminar, the latest addition to Ofil’s range of products, brings an innovative approach to corona detection.
Food pyramid
The document discusses the food pyramid and the 5 main food groups: fruits and vegetables; fish and meat; cereals; milk, eggs and dairy products; and sugary and fatty products. It explains that each food group provides different vitamins, proteins, carbohydrates, calcium, sugar and fat that are necessary for the body's correct growth and health, though not in equal amounts. It includes an example food pyramid and instructions to stick different food items in the correct places within the pyramid.
Food pyramid presentation
The document provides information and recommendations about eating a healthy, balanced diet according to the food pyramid guidelines. It discusses the importance of eating a variety of foods from all major food groups each day, including vegetables, fruits, grains, dairy, proteins, and fats in moderation. Specific foods are highlighted for each group along with serving size recommendations to aim for a nutritious diet.
Introduction to Payroll and Payroll Processing
Payroll processing involves calculating and distributing employee compensation. It requires determining earnings, deducting taxes and other withholdings, and issuing payment. Accurate and timely payroll administration is important for both employers and employees.
Rfid & its applications
This document discusses RFID technology and its applications. It begins with an introduction to RFID, describing its components and different tag types. Applications that were discussed include logistics, inventory control, libraries, and electronic toll collection. The document also summarizes the results of an online survey on opinions of RFID. It concludes that RFID provides benefits like contactless reading and updating data, though costs remain higher than barcodes and standards are still being developed.
Lanie's CV
1. Sahada A. Lubama Gonzales is a Filipino front hospital receptionist currently working at Emirates International Hospital in Al Ain City, UAE.
2. She has over 15 years of experience in customer service roles in cosmetics retail, hospital reception, and sales and distribution.
3. Her responsibilities include welcoming patients, scheduling appointments, ensuring patient information is correctly entered, maintaining inventory, and providing excellent customer service.
Evento 15 novembre microsoft
Corso di aggiornamento Microsoft: Office 365, Microsoft Azure, EMS (Enterprise Mobility Suite) e il nuovo Windows Server 2016.
Tutoriel intégrer une carte personnalisée google maps sur son site web
Tutoriel expliquant comment intégrer une carte réalisée sous Google Maps sur son site web.
Les sites d'avis au service de la valorisation de mon entreprise touristique ...
Ce diaporama a été présenté lors des clubs e-tourisme du Médoc. Il essaie de présenter ce que sont les sites d'avis, comment il fonctionnent, et comment une entreprise touristique peut utiliser ces outils pour améliorer son offre et faire progresser la visibilité et l'image de son entreprise.
SURAT KPD PM DAN EXE SUMMARY (Eng version) Sep15
This document is a proposal submitted to the Prime Minister of Malaysia requesting approval to form a network of companies, banks, banking systems, and an Asean International City. The proposal outlines plans to establish these networks to benefit Malaysia's economy by assisting and stabilizing the economies of Malaysia and Southeast Asia, assisting banking systems and the execution of government and private sector projects. The proposal provides details on funding approaches and requests approval for company and banking licenses. Attached documents provide further details on the proposed operations and management structure.
Earth’s tilting movement in its elliptic orbit.
This manuscript is the original work carried out by the author. This gives us the idea about the existence of earth. The various stages which the earth comes across are identified with scientific proof in this study. This gives us the knowledge about the some unrevealed facts about the earth. These unrevealed facts can help us to further understand the science of earth. The knowledge in this book could become the base for further research in this regard. The knowledge and the ideas in this manuscript are purely innovative and novel. After a consistent research on the subject this was made available to the public for understanding the facts of earth which are unrevealed as yet. I hope this information will definitely add the knowledge to the people who have a zest to understand the earth science.
RFID Application
This document discusses RFID (Radio Frequency Identification) and its applications. It begins with an introduction to RFID, describing its components and how it works. It then discusses different types of RFID tags and provides examples of current applications of RFID technology. These include uses in access control, asset tracking, supply chain management, payment systems, and electronic toll collection. The document also describes an online survey on opinions of RFID and its results. It concludes with possibilities for further development of RFID in medical and library uses.
The Food Pyramid
This document discusses the Food Pyramid and provides guidance for teaching children about healthy eating habits. It outlines the major food groups according to the Food Pyramid and provides examples of foods in each group. It encourages discussing the health benefits of foods in each group and having children identify foods they enjoy eating from each group. The document also stresses the importance of eating a variety of healthy foods from the different groups and keeping track of food intake.
Importance du contenu redactionnel pour le referencement : par AxeNet
Quelle importance pour le contenu redactionnel dans le référencement d'un site Internet ?
Presentation de Sylvain Richard de l'agence AxeNet au SMX Paris 2011.
Le site de l'agence : http://www.axe-net.fr
Le blog : http://blog.axe-net.fr
How do satellites orbit the earth
So what launch speed does a satellite need in order to orbit the earth? ... The motion of satellites, like any projectile, is governed by Newton's laws of motion.
Saran buat praktisi rukyah
Dokumen ini memberikan saran kepada praktisi terapi ruqyah dalam menangani orang dengan gangguan jiwa. Saran tersebut mencakup untuk tidak menekan trauma masa lalu pasien, menghargai privasi pasien, merujuk ke psikiater bila gejala masih ada setelah ruqyah, serta memahami faktor multifaktor penyebab gangguan jiwa secara ilmiah. Praktisi juga disarankan untuk tidak mempermalukan pasien demi kes
Bagaimana memilih sumber informasi online yang bermutu dan
Website yang bermutu memiliki pengelola yang jelas identitasnya, sumber pendanaan yang transparan, dan tujuan yang jelas. Informasi didukung fakta ilmiah terbaru dari sumber terpercaya dan diedit oleh ahli. Website tersebut juga terbuka untuk interaksi dengan pembaca.
Viewers also liked (20)
Tutoriel intégrer une carte personnalisée google maps sur son site web
Tutoriel intégrer une carte personnalisée google maps sur son site web
Les sites d'avis au service de la valorisation de mon entreprise touristique ...
Les sites d'avis au service de la valorisation de mon entreprise touristique ...
Importance du contenu redactionnel pour le referencement : par AxeNet
Importance du contenu redactionnel pour le referencement : par AxeNet
Bagaimana memilih sumber informasi online yang bermutu dan
Bagaimana memilih sumber informasi online yang bermutu dan
Similar to Ofil's Daytime Corona Camera
Presentation OFIL DAYCOR II - CAMERA CORONA.ppt
This document provides an overview of Ofil Ltd., a company that develops and manufactures daytime UV inspection systems. It describes their DayCor®II technology, which uses a solar blind filter and bi-spectral imaging to detect corona, partial discharge, and arcing on electric grid components during full daylight. The document outlines the key features and advantages of the DayCor®II system, such as its ability to pinpoint the exact location of issues and help utilities prioritize repairs. It then provides several examples of how utilities have used the DayCor®II camera to detect and locate corona and other problems on a variety of electric grid assets, including high voltage transmission lines, substations, and distribution lines.
CAMERA CORONA TD100 Technology and Applications.pptx
The document provides information on OHT's DayCor UV inspection system for utility infrastructure. It discusses the system's technology overview, features, applications, and customers. The system uses bi-spectral imaging with a solar blind UV filter to detect corona discharge and locate the source using visible light imaging. It has been used to inspect transmission lines, substations, and distribution lines for utilities worldwide to identify insulation issues.
Cleanroom air-ionization-in-a-nano-world
Corona ionizers used in semiconductor manufacturing cleanrooms produce contamination as they operate, limiting their effectiveness for advanced nodes below 22nm. Alphaboost uses alpha particle technology that generates ions without high voltage, sharp points, or gas conversion, eliminating contamination sources. Studies show equivalent or better ion output with much lower particle counts compared to corona ionizers. Alphaboost provides stable, maintenance-free ionization required for manufacturing at 22nm and below nodes.
Radiography
Radiography uses x-rays or gamma rays to detect flaws in materials. X-rays are produced when high-speed electrons collide with a metal target, while gamma rays come from radioactive isotopes. As the radiation passes through an object, areas of different thickness or density absorb differing amounts, forming an image on film or digitally. Radiography is widely used in industries like aerospace, military, and manufacturing to inspect components for defects without destroying them. Proper safety procedures must be followed due to the ionizing nature of x-rays and gamma rays.
RADIATION HARDENED CHIPS
Radiation hardened chips are designed to resist damage from ionizing radiation like that encountered in space, around nuclear reactors, and near particle accelerators. They use techniques like hardened substrates, shielding, and error correction to prevent issues like data corruption from radiation. Major sources of damaging radiation include Van Allen belts, cosmic rays, solar particles, and nuclear reactions. Radiation hardening aims to let electronics reliably function in radiation-intensive environments like satellites and nuclear facilities.
Corrona Effect.ppt
Corona is a luminous discharge caused by the ionization of air surrounding an electrode due to a voltage gradient exceeding a critical value. Corona from conductors can cause audible noise, radio noise, and loss of power, with effects worsened by factors like high altitude, foul weather, and voltage upgrades. While corona is dependent on electric field strength, it is also influenced by conductor geometry, surface condition, humidity, and air density.
BVServices
- BirdView SRL performs multispectral inspections of power lines using helicopters, gyroplanes, and drones equipped with sensors.
- Sensors include daylight, thermal infrared, and corona cameras to detect visible defects, overheating, and electrical discharges.
- Images and video are analyzed post-flight to identify anomalies on hardware, insulators, towers, and other components.
- Inspections check for corona effects, hot spots from loose connections, and structural issues to prevent faults and ensure safety.
Laser,Optical Fibres and Ultrasonics
A laser is a device that generates coherent light through the process of stimulated emission. It works by stimulating electrons in an excited state to drop to a lower energy level, emitting photons of the same wavelength, phase, and direction. There are three main mechanisms of light emission: absorption, spontaneous emission, and stimulated emission. Lasers use stimulated emission to produce an intense, focused beam of light. Common laser materials include gases, liquids, and solid-state semiconductors doped with ions like neodymium. Applications include optical storage, printing, medicine, manufacturing, communication, and more.
Radiobiology3&4
The document discusses different types of electromagnetic radiation and particle radiation, including their properties and sources. It covers the electromagnetic spectrum, from radio waves to gamma rays. It also discusses ionizing radiation that can remove electrons from atoms, such as x-rays, gamma rays, alpha particles, and beta particles, and their ability to cause biological effects. Low levels of naturally occurring and man-made radioactive materials are present in our environment.
Absorption Spectroscopy
1. Absorption spectroscopy measures the absorption of light by a sample as it transitions between energy levels. The amount of light absorbed is dependent on characteristics of the sample like concentration and path length.
2. A spectrophotometer directs light from a source through a wavelength selector and sample cell, and a detector measures the intensity of light transmitted. Double beam instruments separately measure light passing through a reference and sample for improved accuracy.
3. Beer's law states absorbance is directly proportional to concentration, path length, and a proportionality constant. Spectrophotometers allow determination of unknown concentrations by measuring absorbance.
426368105-Digital-RT-PPT-04-04-2018.pptx
The document provides information on digital radiography testing (DRT). It discusses different types of radiography including x-ray radiography and gamma radiography. X-rays are produced using an x-ray tube, while gamma rays come from radioactive sources. Digital radiography techniques like computed radiography use imaging plates containing storage phosphors to capture digital images without film. Computed radiography provides digital images that can be enhanced and archived electronically.
Ultra violet (UV) spectroscopy, introduction,principle instrumentation,differ...
- The document is a presentation on ultraviolet spectroscopy submitted by Moriyom Akhter and Md Shah Alam from the Department of Pharmacy at World University of Bangladesh.
- It defines ultraviolet spectroscopy and discusses key concepts like absorption spectra, types of electronic transitions that can occur, Beer's and Lambert's absorption laws, instrumentation components, and applications in qualitative and quantitative analysis.
- The presentation also examines effects of chromophores and auxochromes on absorption spectra and maximum wavelengths, and how solvents can shift absorption peaks.
Optical fibre 2
The document discusses several disadvantages of fiber optic communication systems:
1. Fiber optic systems have high upfront costs due to the expense of installing optical fiber cables compared to copper wiring, though the raw materials are inexpensive.
2. Signal scattering from linear and non-linear effects causes light to transfer between fiber modes, reducing the strength of the transmitted signal over long distances.
3. Optical fibers are susceptible to additional signal loss if bent below their minimum bend radius, which can vary significantly depending on the fiber type.
UV-VISIBLE SPECTROSCOPY INSTRUMENTATION.pptx
This document discusses UV-Visible spectroscopy instrumentation. It describes the key components of a UV-Visible spectrophotometer including light sources like hydrogen discharge lamps, wavelength selectors like monochromators and filters, sample holders, detectors like photomultiplier tubes, and how these components work together in single-beam and double-beam instrument designs to measure absorbance spectra. The learning objectives are to understand the principles and components of UV-Visible spectroscopy instrumentation.
U.V Spectroscopy.
This document discusses the principles, instrumentation, and applications of UV spectroscopy. It begins with an introduction to UV spectroscopy and its uses in qualitative and quantitative analysis. It then covers the underlying principles of UV absorption, including Lambert's law and Beer's law. The key components of a UV spectrophotometer are described, including radiation sources, monochromators, sample containers, detectors, and recording systems. Finally, common applications of UV spectroscopy are outlined, such as determining functional groups, conjugation, and reaction monitoring.
Electron beam technology
it describes about electron beam characteristics and applications and it outlines the following topics introduction, E-beam processing, E-beam equipment and applications.
UV Spectroscopy 1 (1).ppsx
This document provides an overview of UV-visible spectroscopy. It discusses the electromagnetic spectrum and how UV-visible spectroscopy involves absorption of UV or visible light by molecules, promoting electrons to excited states. Beer-Lambert's law describes the relationship between light absorption and analyte concentration. Chromophores and auxochromes determine peak absorption wavelengths. Factors like pH and solvents affect absorption spectra. UV-visible spectroscopy has applications in determining molecular structures, concentrations, and impurities. Instrumentation includes sources like hydrogen lamps, monochromators, sample holders, detectors like photomultiplier tubes, and single or double beam spectrophotometers.
Ultra violet spectrometer
UV-visible spectroscopy uses light in the UV and visible regions to analyze molecular structure. The main components of a UV-visible spectrometer are a light source, wavelength selector like a monochromator, sample cell, detector, and recorder. Common light sources include hydrogen, deuterium, and tungsten lamps. Filters or monochromators are used to select wavelengths, and samples are placed in cuvettes. Detectors measure light intensity and are connected to a recorder. Double beam spectrometers have advantages over single beam in compensating for instrument fluctuations.
Radiographic Testing (RT)- NDT
This document discusses radiographic testing (RT), which uses x-rays or gamma rays to examine internal structures without destroying the test object. It describes how x-rays and gamma rays are produced and used to penetrate test objects. Images are captured on film, with denser areas appearing darker. RT can detect surface and subsurface flaws and provide permanent inspection records. Limitations include difficulty detecting cracks oriented obliquely to the radiation beam.
Uv,vis,nmr,mass,ir
This document provides an overview of instrumentation used in UV-Visible spectroscopy. It describes the key components of a UV-Vis spectrophotometer including the light source, monochromator, sample cell, detector, and recorder. Common light sources for the UV and visible regions are discussed such as deuterium, xenon discharge, and tungsten lamps. Filters and diffraction gratings are described as types of monochromators. The functions of the sample cell and popular detector types including photovoltaic cells, photocells, and photomultiplier tubes are summarized. Finally, single beam and double beam instrument designs are contrasted.
Similar to Ofil's Daytime Corona Camera (20)
CAMERA CORONA TD100 Technology and Applications.pptx
CAMERA CORONA TD100 Technology and Applications.pptx
Ultra violet (UV) spectroscopy, introduction,principle instrumentation,differ...
Ultra violet (UV) spectroscopy, introduction,principle instrumentation,differ...
Recently uploaded
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Recently uploaded (20)
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Ofil's Daytime Corona Camera
- 1. Ofil’s Daytime Corona Cameras
- 3. Economic
- 4. Routinecorona cannot be seen during daytime
- 6. Corona is caused by ionization of gas, where electrons that have gained energy from the local e-field revert to their original state and release light/energy mostlyin the UV range
- 7. A critical value of e-field (~24Kv/Cm) is needed to induce the local corona discharge
- 10. Corona camera for daytime Principle: Bi-Spectral UV-Visible Input: UV radiation – unseen by human eye + Visible view of the background Output Visible representation of the unseen UV overlaid on the background
- 11. The spectrum: UVc is in the solar blind UV IR 120 C B A 10 100 8 80 Solar Radiation (µW/cm2/nm ) 6 Filter Transmission (%) 60 4 40 2 20 200 300 400 500 600 700 800 900 1000 Wave length (nm) visible range corona
- 12. Bi Spectral imaging 250 kV Combined mode Visible mode UV mode
- 13. Examples - Transmission Transmission - BN
- 14. Examples - distribution Pinpoint corona sources 13.4kV
- 19. Remote sensing
- 20. Detect Corona and UV events
- 21. Locate and pinpoint Corona
- 23. Record each corona source
- 25. Hand held for on foot patrol
- 26. Vehicle mounted
- 28. Ranger
- 29. Rail
- 30. Rom
- 32. UVolle-SCITI – Corona Inspection Training Institutewww.citi-training.com