This is the notes and slides provided and compiled by teachers from reputable schools. Took me many months to compile this and share with you guys! By the way, the slides with a star usually mean that it will be significant so take note! Sharing with you now is this notes!!! Enjoy and love geography!!!
Geography Elective/Pure: Weather and climate notesDodge Lim
This is the notes and slides provided and compiled by teachers from reputable schools. Took me many months to compile this and share with you guys! By the way, the slides with a star usually mean that it will be significant so take note! Sharing with you now is this notes!!! Enjoy and love geography!!!
This is the notes and slides provided and compiled by teachers from reputable schools. Sharing with you now is this notes!!! Enjoy and love geography!!!
This is the notes and slides provided and compiled by teachers from reputable schools. Took me many months to compile this and share with you guys! By the way, the slides with a star usually mean that it will be significant so take note! Sharing with you now is this notes!!! Enjoy and love geography!!!
Geography Elective/Pure: Weather and climate notesDodge Lim
This is the notes and slides provided and compiled by teachers from reputable schools. Took me many months to compile this and share with you guys! By the way, the slides with a star usually mean that it will be significant so take note! Sharing with you now is this notes!!! Enjoy and love geography!!!
This is the notes and slides provided and compiled by teachers from reputable schools. Sharing with you now is this notes!!! Enjoy and love geography!!!
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - HAZARDS RESULTING FROM ATMOSPHERIC DISTURBANCES. It contain case studies: Hurricane Katrina 2005, Cloud Seeding in New Zealand 1950-1970.
CAMBRIDGE AS GEOGRAPHY REVISION: ATMOSPHERE AND WEATHER - 2.1 LOCAL ENERGY BU...George Dumitrache
A comprehensive presentation of subchapter 2.1 Local Energy Budgets, from the second chapter of Physical Geography, AS Cambridge, Atmosphere and Weather.
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - SUSTAINABLE MANAGEMENT IN HAZARDOUS ENVIRONMENTS. It contain the case study about Bioengineering in Malaysia.
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - HAZARDOUS ENVIRONMENTS RESULTING FROM MASS MOVEMENTS. It contain case studies: Italian Mudslides 1998, New Zealand Landslip 1979, European Avalanches 1999.
A2 Geography Revision for Coastal Environments, subchapter 8.1 Waves Marine and Subaerial Processes. It is suitable for Year 13 Geography, Cambridge Examination in November 2016. It contains: key terms and definitions, a topic summary, sketches and descriptions, additional work (6 questions for testing your knowledge) and some suggested websites.
CAMBRIDGE GEOGRAPHY A2 REVISION - SUSTAINABLE MANAGEMENT OF HAZARDOUS ENVIRONMENTS. Presentation suitable for Cambridge A2 students. It contains: key terms and definitions, topic summary, additional work and suggested websites.
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - HAZARDS RESULTING FROM ATMOSPHERIC DISTURBANCES. It contain case studies: Hurricane Katrina 2005, Cloud Seeding in New Zealand 1950-1970.
CAMBRIDGE AS GEOGRAPHY REVISION: ATMOSPHERE AND WEATHER - 2.1 LOCAL ENERGY BU...George Dumitrache
A comprehensive presentation of subchapter 2.1 Local Energy Budgets, from the second chapter of Physical Geography, AS Cambridge, Atmosphere and Weather.
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - SUSTAINABLE MANAGEMENT IN HAZARDOUS ENVIRONMENTS. It contain the case study about Bioengineering in Malaysia.
A2 CAMBRIDGE GEOGRAPHY: HAZARDOUS ENVIRONMENTS - HAZARDOUS ENVIRONMENTS RESULTING FROM MASS MOVEMENTS. It contain case studies: Italian Mudslides 1998, New Zealand Landslip 1979, European Avalanches 1999.
A2 Geography Revision for Coastal Environments, subchapter 8.1 Waves Marine and Subaerial Processes. It is suitable for Year 13 Geography, Cambridge Examination in November 2016. It contains: key terms and definitions, a topic summary, sketches and descriptions, additional work (6 questions for testing your knowledge) and some suggested websites.
CAMBRIDGE GEOGRAPHY A2 REVISION - SUSTAINABLE MANAGEMENT OF HAZARDOUS ENVIRONMENTS. Presentation suitable for Cambridge A2 students. It contains: key terms and definitions, topic summary, additional work and suggested websites.
GEOGRAPHY IGCSE: PLATE TECTONICS. Earth's layers. Inner core, outer core, mantle, crust, the structure of Earth, plate boundaries and interactions, magma and igneous rocks, forming a volcano, compressional boundaries, folding.
CSEC Geography- Internal Forces - Plate Tectonics and EarthquakesOral Johnson
This document looks at the Earth's internal forces. The main layers of the earth are described. The history surrounding plate tectonics is discussed. The different types of plate boundaries is also explained.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
1. NOTES ON LIVING WITH TECTONICHAZARDS (N levels)
1. What are tectonic hazards?
Tectonic hazards are caused by movements in the Earth’s crust e.g. Earthquakes, Volcanic
eruptions, Tsunamis.
2. What is the internal structure of the Earth?
The crust is the outer layer of the earth and it varies in thickness from 5 to 70 km.
Mantle is the second layer of the earth's structure which is 2900 km thick. It is divided into
upper mantle and lower mantle. The upper mantle is a layer of solid rock and asthenosphere.
Below the uppermost mantle, rocks are close to melting point and easily deformed as the
temperature is between 800⁰C and 3,000⁰C.Convection currents carry heat from the hot
inner mantle to the cooler outer mantle.
The outer core is about 2100 km made up of molten iron-nickel (liquid) and the inner
core is about 1200km consists of solid iron nickel and is very hot and under great pressure.
3. What is the difference between the tectonic plates?
The crust is cracked into pieces called tectonic plates which float on the mantle. The tectonic
plates are part of the lithosphere, which includes the crust and the uppermost mantle. There
are two types tectonic plates:
Continental crust – found beneath the earth’s continental land masses and under shallow
seas close to continents, it is thicker between 30 and 60km but is made of lighter rocks
including granite.
Oceanic crust – found beneath deep oceans, it is thinner between 5 and 8km but it is
heavier and denser as it consist mainly of basalt
4. How do the tectonic plates move?
Movement of crustal plates is driven by convection currents and slab-pull force.
Convection currents occur when materials in the mantle is heated by the core, causing the
mantle material to expand, rise and spread out beneath the plates. This causes plates to be
dragged along and to move away from each other. Then the hot mantle material cools and
sinks, pulling the plates along. The sinking mantle materials heats up again as it nears the
core and the whole process repeats.
Slab-pull force occurs when the denser oceanic plate is force beneath the less dense
continental plate resulting in subuction. As the plate subducts, it pulls the rest of the plates
along. The subducting plate drives the downward moving portion of convection currents. The
mantle material, which is found away from where the plate subduct, drives the rising portion
of convection currents.
2. 5. What are the types of plate boundaries?
Types of plate boundaries and examples:
· Divergent: where plates move away from each other - oceanic-oceanic e.g. Mid-
Atlantic Ridge, continental-continental e.g. Great Rift Valley of East Africa
· Convergent:where plates move towards each other - oceanic-oceanic e.g. Mariana
Trench, continental-continental e.g. Himalayas, oceanic-continental e.g. Andes
· Transform: where plates move past each other e.g. San Andreas Fault between the
Pacific plate and the North American Plate.
6. Describe the characteristics of landforms associated with plate movements.
Oceanic-oceanic plate divergence: Mid-oceanic ridge and Volcanic islands
E.g. The Mid-Atlantic Ridge
Eg: The Azores (Chain of volcanic islands)
As the plates move apart due to convection currents inside the Earth. magma rises
from the mantle to fill the gap between the plates as they diverge.
New sea floor is formed when the magma cools and solidifies. This process is called
sea-floor spreading.
3. Magma rises at the zone of divergence/spreading zone to form a ridge of new ocean
floor called mid-oceanic ridge.
The newly formed (youngest) rocks are closest to the middle of the ridge/plate
boundaries.
At various points along the ridge, magma builds up above the ocean to form volcanic
islands.
Continental–continental plate divergence:Rift valleys and block mountains
E.g. East African Rift Valley
When two continental plates diverge, they are stretched, causing fractures to form at
the plate boundary.
The land in between the two continental plates sink, forming a linear depression
known as a rift valley.
A number of active volcanoes and earthquake fractures can also be found along the
East African Rift Valley.
Oceanic–oceanic plate convergence:Trench and islands, volcanoes
E.g. Mariana Trench, Mariana Islands
When two oceanic plates converge, one subducts under the other.
A subduction zone forms, creating a deep oceanic trench.
The subduction of the oceanic plate causes the solid mantle material to melt and
magma is formed.
The magma rises through the mantle and ocean floor to emerge as volcanoes.
Eventually a chain or arc of islands called island arc is formed.
Earthquakes may also occur.
4. Continental-continental plate convergence: Fold mountains
E.g. Himalayas
Plates made largely of continental crust may collide with other plates made largely of
continental crust.
However, both plates have similar densities and hence, resist subduction.
Instead, the plates break, slide along fractures in the crust and fold, forming fold
mountains.
Oceanic-continental plate convergence:Oceanic trench, Fold mountains and
Volcanoes
E.g. Sunda Trench, Barisan Mountains
When an oceanic plate meets a continental plate, the denser oceanic plate subducts
under the less dense continental plate.
A subduction zone forms, creating a deep oceanic trench along the plate boundary.
The subduction of the continental plate causes the soild mantle material to melt and
magma is formed.
The magma rises through the mantle and crust to emerge as volcanoes on land.
The edge of thick continental plate buckles to form fold mountains.
Earthquakes may also occur.
Transform plate boundaries
E.g. San Andreas Fault, United States of America - In 1906, an earthquake occurred in
San Francisco, southern California between the Pacific Plate and the North American
Plate. This caused several hundred km of North American Plate to move an average of
2.5 m, and at one point almost 7 m all in less than 1 minute
Plates slide past each other.
As they do so, tremendous stress builds up.
This stress is eventually released, often as a violent earthquake.
5. 7. How is a fold mountain formed?
E.g. The Himalayas, the Rocky Mountains and the Andes
Fold mountains are formed along convergent plate boundaries.
The compressional force causes the layers of rocks to buckle and fold.
This process is known as folding.
When there is increasing compressional force on one limb of a fold, the rocks may
buckle until a fracture forms.
1. Describe the formation of Rift valleys and block mountains.
E.g. East African Rift Valley
Rift valleys and block mountains are formed at divergent plate boundaries where
plates are pulled apart giving rise to faults.
The tensional forces from these movements result in parts of the crust being
fractured.
A block mountain is a block of land with steep sides. It is formed when sections of
the crust extend along fault lines and rock masses surrounding a central block sink
due to tensional forces.
A rift valleyis a valley with steep sides formed along fault lines.
2. Describe the formation of volcano.
A volcano is a landform formed by magma ejected from the mantle onto the earth’s
surface. Magma is molten rock found below the earth’s surface. Magma that is
ejected onto the surface is known as lava. The lava cools and solidifies in layers and
form a cone-shaped mountain called a volcano.
6. Volcanoes vary in shapes and sizes due to the characteristics of lava. Low silica lava has
low viscosity (stickiness) while high-silica has high viscosity.
3. Differentiate between the shield volcano and the stratovolcano.
Shield volcano have gently sloping sides and a broad summit. It is made up of fluid
lava with low silica content. It is more mobile and spreads away from the vent before
it solidifies forming gentle concave slopes.
E.g. Mauna Loa (Hawaii), Mount Washington, United States of America
Stratovolcano is steeper at the top and gentler at the base. There are periodic
violent eruptions with alternate layers of lava and ash accumulated.
E.g. Mt Fujiyama in Japan, Mt Pinatubo in Philippines, Mount Mayon, Philippines
4. Explain what is an active, dormant or extinct volcano?
Active volcanoes – volcanoes which are currently erupting or are expected to erupt in the
future
Dormant volcanoes – volcanoes which are currently inactive but may erupt in near future
Extinct volcanoes – volcanoes without current seismic activity with no geological evidence
of eruptions for the past thousands of years.
12. Describe the distribution of volcanoes.
Mainly along the Pacific Ring of Fire which is the boundaries of several converging
plates – Pacific Plate, Nazca Plate, the Philippines Plate and the Eurasian Plate.
Also found where plates are diverging e.g. Atlantic Ocean and East Africa
13. Explain the cause of earthquake.
Earthquakes occur when there is plate movement along plate boundaries. The plate
movements cause the slow build-up of stress on the rocks found on either side of the fault.
When the rocks can no longer withstand the increasing stress, they can suddenly slip many
metres, causing an earthquake.
The release of tension in the form of seismic waves made the ground vibrate. After an
earthquake, a series of smaller earthquakes called aftershocks occur along the fault line.
A seismograph is used for recording earthquake. The intensity of earthquake is measured
on the Richter scale graded from 1 to 9. The higher the number on the Richter scale the
greater the intensity of the earthquake.
7. 14. Explain why some earthquakes are more damaging than others.
Some earthquake causes more damage because the intensity of the earthquake differs.
Places located near to the epicentre will experience higher intensity of the earthquake and
thus suffer the greatest amount of damage.
The damage also depends on the depth of its origin – a deep-focus earthquake ( 70-
700km below earth surface) has a smaller impact on the land compared to a shallow-focus
earthquake (upper 70km of earth crust) as seismic waves take a longer time to reach the
surface and would have lost most of their energy by then,
The extent of damage also depends on the amount of development in the areas where
earthquake takes place. An earthquake which struck a desert is less damaging than in a city.
The foundations of the buildings and bridges are also important because if the
foundation is good, it will withstand the vibration. Developed areas suffer more damages as
water and gas pipes broke. Urban areas are heavily built up with dense population densities
and heavy traffic movements. As residents in big urban areas usually live in high rise
buildings because land is scarce in the cities, damage to properties and loss of lives can be
phenomenal as the high rise building collapse when earthquakes occur. As building collapse,
other related hazards usually occur such as fire from damaged power lines. Destruction to
highways, streets, flyover and bridges leads to widespread traffic congestion and commuters
may be killed and hurt. Telephone line and power supply will be disrupted, and this will affect
communication with outside world which in turn will hamper rescue work.
The strength of the earthquake also depends on the the geology of the epicentre.
e.g. Mexico, built on layers of mud and sand, vibrates like jelly in the 1985 earthquake which
killed 7000.
In Christchurch, many houses and buildings had to be abandoned because of liquefaction
where the ground becomes unstable and saturated soil flows like a liquid after the
earthquake in 2011.
The damage also depends on the level of preparedness and time of occurrence.
Preparations such as having evacuation plans, trained rescue workers and other action
plans can make the damage of an earthquake more manageable if the people are more
prepared. If the earthquake occurs when most people are sleeping, there is a higher chance
that more deaths will occur as they are trapped in their houses. E.g. more than 2400 people
died when an earthquake occurred after midnight in the Sun Moon Lake Region in Taiwan in
1999.
15. Explain the impacts and hazards associated with earthquakes.
Disruption of services - An earthquake can disrupt services such as the supply of
electricity, gas and water. The earthquake in Kobe, Japan, in 1995 disrupted
electricity, gas and water supplies to about a million of Kobe city’s 1.4 million
residents.
Fires are started due to rupture gas pipes which provide fuel to start fires as well as
exposing electrical cables which ignite flammable items. The earthquake
in Kobe, Japan in 1995 caused extensive fires that raged on an off for 2 days and it
spread quickly due to strong winds. The firemen were unable to control the fires as
there was no water supply due to ruptured water pipes.
8. Landslides caused by earthquakes which weaken the slopes of hills and mountains
due to the shaking of the ground. In 1970, an earthquake off the coast
of Peru triggered a massive landslide on the slopes of Mount Huascaranand
destroyed the town of Ranrahirca killing 18000 people within seconds.
Destruction of properties – the earthquake in Tohoku, Japan in 2011, caused a
tsunami which travelled up to 10km inland, causing extensive structural damage
resulting in hundreds of thousands of people forced from their homes. There was a
severe shortage of housing and long-term consequence on the health of people.
Destruction of infrastructure –earthquakes cause cracks to form in infrastructure
such as roads and bridges. Transportation can be disrupted as it is unsafe to use the
damaged roads.
Loss of lives and threat of tsunami
Aftershocks -there could still be aftershocks of lower magnitudes as there are
adjustments to the repositioning of the fault. As many buildings are already
weakened by the main shock, the aftershocks will cause more collapse and there will
be more casualties. Dead animals and corpse will start to rot and if not disposed
quickly, there might be an outbreak of epidemic such as Malaria.
16. Explain the cause of tsunamis.
Tsunamis may be formed by:
Movement of the sea floor during a large earthquake at the subduction zones
An explosive underwater volcanic eruption
An underwater landslide;
A landslide triggered by earthquake or volcanic eruption which causes materials to
plunge into the water.
17. Describe the benefits and risks of living in volcanic areas.
Benefits of living in volcanic areas
Volcanic regions are often rich in sulphur deposits which can be mined for industrial
use. E.g. In East Java, Indonesia, the sulphur collected is used to make matches and
fertilizers, and refine sugar.
Basic lava often produces fertile soil after weathering which is suitable for cultivation.
e.g. fertile volcanic soils in Java and Deccan Plateau in India
Geothermal power may be utilised for making steam to drive turbines and generate
electricity e.g. over 70% of homes in Iceland are heated by volcanic steam
Volcanic areas offer spectacularly beautiful attractions for tourists. e.g Mt Fuji
inJapan. Volcanic areas can be rich in history e.g. ruins of Pompeii in Italy where Mt
Vesuvius erupted in 79 CE and buried the town. Every year, almost 3 million people
visit the unearthed archaeological site which revealed buildings, pottery and mosaics
left intact.
Volcanic ash can be used to surface roads and manufacture bricks
9. In some parts of the world, valuable materials such as gold, iron and diamonds have
been formed by volcanic activity, and large mining centres have developed. The old
volcanic rocks at Kimberly in South Africa are one of the world’s richest sources of
diamond.
Risks of living in volcanic areas
Volcanic eruptions claim many lives and destroy buildings and property. The lava,
with high temperatures of between 500ºC and 1400 ºC burns the area it flows
through. Volcanic bombs of heated rocks destroy property around the volcano e.g.
eruption of Kilauea in Hawaii destroyed many homes and highway.
Poisonous gases such as compounds of sulphur, carbon monoxide and carbon
dioxide are produced. Inhaling the hot ash and gases can result in serious injury or
death.
Landslide can occur due to collapse of a volcanic cone. Landslides can obstruct the
flow of rivers causing floods, block roads, and bury villages and farmlands. The
eruption of Nevado del Ruiz in the Andes mountain of South America in 1985 caused
lahars which killed more than 20000 people in the town of Armero.
Ash and volcanic dust ejected by volcanoes may be blown away to pollute the air and
disrupt human activities over a large area from the volcano. It can block sunlight,
suffocate crops and cause severe respiratory problems for people and animals. The
eruption of Eyjafjallajökull in Iceland in 2010 resulted in the closure of air space over
much of Europe as the volcanic particles pose a serious danger to aircraft engines
and structures. Connecting flights worldwide were cancelled and delays to 1.2 million
passengers daily cost the airline industry a total of US$1.8 billion.
When snow-capped volcanoes erupt, a sudden flash flood will also result from the
melting of snow and ice. Mudflow may also be produced.
Sulphur dioxide released from volcanic eruption may react with water vapour and
other chemicals in the atmosphere to form sulphur-based participles which can
reflect the sun’ energy back into the atmosphere and temporarily cool the earth. The
1815 eruption of Mount Tambora in Indonesia cause the global temperatures to drop
by as much as 1.7ºC.