I am working to recently Clean Fuels Project KNPC MAB1 (KUWAIT) project. With a back ground of total experience more than 10 years & involved in many complicated multidiscipline Gas Petrochemical Refinery and power Generation Plant, Experience in area of Supervision Quality Inspection, Broad Experience and good knowledge of execution Instrumentation. Installation / Pre-commissioning inspection for each phase of Instrumentation activities as per standard & project specification. Especially Instrument side. Having solid experience as a with the ability to follow the INSTRUMENT QA/QC ENGINEER he procedure ITP to include Site inspection, material equipment’s, instruments final inspection before pre-commissioning good supervision &coordinating with QC Engineer QC Manager within Company & Client.
I have good interpersonal and management skill, discipline, technical knowledge and self-confidence also good team player with excellent health. I thank you for your time& consideration, I can assure you that if given the opportunity, I shall discharge my duties to your satisfaction.
BACKGROUND INCLUDES
o Project Handling and execution
o Site activities Engineer in executing the project
o Technical support activities at site while project execution
o Site design changes as per IFC drawing
PROFESSIONAL SKILLS
o Quality Assurance / Quality Control
o A career span over 12 years experience in Aboard both.
o Strong Analytical, Training Skills and problem solving abilities. An Excellent ability
I am submitting to express my keen interest in the position Sr. Electrical & Instrument Engineer
I am currently worked as Sr. Instrument Field Engineer at Egypt Khalda Petroleum Company (Apache) with 10+ years of overall experience at Construction, commissioning, start-up, planning and Engineering and I Expected Monthly Salary As project budget however my last total net salary 6300$
I worked as QA/QC E&I Engineer / Inspector at the world's largest gas to liquids (GTL) Pearl plant in Qatar, The plant a joint development by Qatar Petroleum and Shell, GTL feed about 15% of worldwide gas resources.
I worked as Sr. QA/QC E&I Engineer / Inspector client (SEPOC, SAFER Exploration & Production Operations Company) representative at the largest project at Yemen Central Processing Unit (CPU) LNG plant at Marib area with total and YLNG joint.
I worked as Sr. Electrical and Instrument Engineer /Supervisor at the largest project at Egypt, with Samsung Engineering.
I am submitting to express my keen interest in the position Sr. Electrical & Instrument Engineer
I am currently worked as Sr. Instrument Field Engineer at Egypt Khalda Petroleum Company (Apache) with 10+ years of overall experience at Construction, commissioning, start-up, planning and Engineering and I Expected Monthly Salary As project budget however my last total net salary 6300$
I worked as QA/QC E&I Engineer / Inspector at the world's largest gas to liquids (GTL) Pearl plant in Qatar, The plant a joint development by Qatar Petroleum and Shell, GTL feed about 15% of worldwide gas resources.
I worked as Sr. QA/QC E&I Engineer / Inspector client (SEPOC, SAFER Exploration & Production Operations Company) representative at the largest project at Yemen Central Processing Unit (CPU) LNG plant at Marib area with total and YLNG joint.
I worked as Sr. Electrical and Instrument Engineer /Supervisor at the largest project at Egypt, with Samsung Engineering.
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
Dear Sir/ Madam,
Good day!
Hope my Mail finds you well, and greetings to your good-self and your respected family,
I am Manoj Kumar and i have 11 years of working experience in instrumentation and i have attached my CV and all scanned documents along with this mail kindly acknowledge me once you receive my mail.
Skype id : manojkumar2870
Notice Period: Immediate
Thanks With Best Regards,
Manoj Kumar
M: +917506966847
Email:manojk940@yahoo.com
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
Dear Sir/ Madam,
Good day!
Hope my Mail finds you well, and greetings to your good-self and your respected family,
I am Manoj Kumar and i have 11 years of working experience in instrumentation and i have attached my CV and all scanned documents along with this mail kindly acknowledge me once you receive my mail.
Skype id : manojkumar2870
Notice Period: Immediate
Thanks With Best Regards,
Manoj Kumar
M: +917506966847
Email:manojk940@yahoo.com
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
My specialty is Project Controls. I have 10+ years of intense and diverse experience and training in many facets of project management, financial planning and have excellent communication skills that complement my experience. Some highlights of my career are :
• Project Planning & Scheduling
• Progress Monitoring
• Performance Reporting
• Change Management – Time & Cost
• Bidding and Proposals Management
• Technical Writing- Plans, Method Statements etc.
Planning, Scheduling & monitoring of activities on daily, weekly and monthly basis and preparation of the reports.
Developed and implemented Quality Plan (QP), Inspection Test Plan (ITP) |
|and Checklist to ensure work flow compliance is met accordingly.
Familiar with ISO-9001/14001,Quality management systems,quality management tools,quality objective and mission.
Planning & coordinating with the contractor, consultants and client for timely completion of all activities.
Monitored and conducted in-process and final inspection, examination, testing procedure to the product inspected and demonstrate capabilities in the following function like planning inspection, evaluating the validity and acceptance, reporting and documentations.
E&I QC INSPECTOR RESUM AND documents.pdfIrfan786pak
I have good working experience more then 17 years in Oil and Gas ,Fertilizer, Chemical, Petrochemical, in Saudi Arabia & Pakistan , Having a good Experience in Maintenance, Pre Commissioning ,& Commissioning, Start-up and erection Activities, Good knowledge & working skills in plant Control Automation and different control systems such as DCS & ESD systems, Burner Management System, Condition Monitoring System, Turbine & Compressor Integrated Control Systems, F&G System, Production Wellheads, Water & Gas Injection Wellheads Hydraulic Control Panels etc. Ability to work alone as a shifter and fault finding & rectify. i am a Safety conscious & sound knowledge about work permits like cold, hot and entry work permits.in Maintenance and Commissioning 4 LTE2.48 % C4G + During my job I'm Responsible for the PM , CM & breakdown maintenance of various field Instrumentation like flow , pressure , temperature level transmitters , vibration probes , control / on - off valves which installed on Process piping , Skids . Self motivated Maintenance Professional with a demonstrated history of working in the Oil & Gas and Petrochemicals industry in instrument & Control system department securing16 years of Practical experience I am expertly capable in fault diagnosis , troubleshooting and process controls systems in process plant to ensure safety guidelines . I am experienced in modern process control instrumentation in chemicals , petrochemical , fertilizer , oil & gas and cryogenic plants in field of instrumentation . Highly skilled in electrical operations & maintenance . Has working proficiency in SAP system utilization and MS office My skills include but are not limited to : PLC , DCS & Vibration Monitoring System | Control Valve Operation & Maintenance | Loop Checking & SAT / FAT Activities | P & ID & Instruments Calibration | Transducers , SIS / SIL Concept , Positioners | Single Loop Controllers , I / P , ESD System | Turbine & Compressor Control Systems | Workshop / Field Test Equipment | Control Valves , Online Gas Analyzers | Burner Management System | Custody Transfer Metering | Commissioning Activities | Interpersonal Skills | Presentation Skills
I am available on
Email: irfanpak181@gmail.com
Mobile 📱: 00966533012366
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
MOHD JAMAL AKTAR QA/QC
1. CV :- E&I QA/QC ENGINEER
Oil & Gas, Refinery, Fertilizer Power Plant and Offshore
MOHAMMAD JAMAL AKTAR
Contact number
India:- +919967768395/ Kuwait 0096567091674
E-mail:- mahijamal786@yahoo.com
Skype Ide:-sagufajamal
I amworking to recently CleanFuelsProject KNPC MAB1 (KUWAIT) project.With a background of
total experience more than 10 years & involved in many complicated multidiscipline Gas Petrochemical
Refinery and power Generation Plant, Experience in area of Supervision Quality Inspection, Broad
Experience and good knowledge of execution Instrumentation. Installation / Pre-commissioning
inspection foreach phaseof Instrumentation activitiesasperstandard & project specification. Especially
Instrument side. Having solid experience as a with the ability to follow the INSTRUMENT QA/QC
ENGINEER heprocedureITP to includeSite inspection,materialequipment’s,instrumentsfinalinspection
before pre-commissioning good supervision &coordinating with QC Engineer QC Manager within
Company & Client.
I have good interpersonal and management skill, discipline, technical knowledge and self-
confidencealso good team player with excellent health. I thank you for your time& consideration, I can
assure you that if given the opportunity, I shall discharge my duties to your satisfaction.
BACKGROUNDINCLUDES
o ProjectHandling and execution
o Site activities Engineer in executing the project
o Technical supportactivitiesat site while project execution
o Site design changesasper IFCdrawing
PROFESSIONALSKILLS
o QualityAssurance/Quality Control
o A career span over12 yearsexperience in Aboard both.
o Strong Analytical,Training Skills and problemsolving abilities. An Excellent ability
PERSONAL DETAILS
o Name : MOHAMMADJAMALAKTAR
Father’s Name : MOHAMMAD SAFIUDDIN
Date of Birth : 03rd
DEC 1982
Place of Birth : Kaitha
Nationality : Indian
Religion : Islam (Muslim)
Languages Known : English, Hindi, Urdu
Pace of Issue : Patna
Passport Details:- Passport No. : N_5711956
Date of Issue : 15.12.2015
Date of Expiry : 14.12.2025
Place of Issue : Patna
2. PERMANENT ADDRESS
Mohammad Jamal Aktar
s/o Md SafiUddin at kaitha postdhamoualdistnawada state-Bihar(805101)
Cell No.:-9967768395
ACADEMICQUALIFICATION
Highest Qualification Diploma Subject engineeringininstrumentation &
controltechnology
SCHOOLS QUALIFICATION
S.S.CPassed
OTHER QUALIFICATION
Diploma in ComputerEducation from20007 to 20008(JamshedpurJharkhand)
ComputerSkill and softwareused Msword,Msexcel, Mspower pointMs office
LANGUAGE
English (Excellent) Hindi/Urdu,
SBC GENERAL TRADING & CONTRACTING CO.W.W.L from 01.09.2016
Post E&I QA/QC SUPERVISOR
Project Clean Fuels Project MAB1 KNPC Kuwait
HYUNDAI HEAVY INDUSTRIES CO. LTD from 11.08.2014 to 06.11.2015
Post Instrument QA/QC Engineer
Project Az-Zour North Phase-1 IWPP (Kuwait)
HYUNDAI ENGINEERING from 20.12.2012 TO 23.08.2013
Post Instrument QA/QC Engineer
Project BOROUGE 3 U & O PROJECT ABU DHABI
GS EGINEERING & CONSTRUCTION CORP From 13.06.2011 TO 16.05.2012
Post E&I QA/QC INSPECTOR
Project RRE2 Abu Dhabi
DOHA PETROLEUM CO.LTD. From 28.08.2012 to 29.11.2012
Post Instrument QA/QC Inspector
Project Mesaieed Ind City Qafco Doha Qatar
DOHA PETROLEM CO. LTD.. From 01.01.2011 to 22.02.2011
Post Instrument qa/qc inspector
Project Mesaieed Ind City Qafco Doha Qatar
KHARAFI NATIONAL CO. From 03.03.2010 to 15.10.2010
Post Instrument QA/QC Inspector
Project Mina Al Ahmadi Refinery Project Kuwait
S.K. ENGINEERING & CONSTRUCTION From 28.11.2002 TO 21.12.2006
Post E & I QA/QC Inspector
Project KOC Project Mina Al Ahmadi Kuwait
SEPAM From 05.08.2008 TO 02.01.2010
Post Instrument Engineer
Project P.M.P. Project Ras Laffan Doha Qatar
3. MAJOR DUTIES & RESPONSIBILITIES
I have various knowledge in instrumentation and electrical control system such as a test
equipment electronic and pneumatics implementation of P&ID drawing, process engineering
flowdiagram(PEPS) loop diagram,hookup drawing,installation of instrument bench calibration
& troubleshooting in instrument control panel.
Calibration of all types of transmitter like temperature, pressure, flow level with highway
addressableremotetransducer(Hart) communicatorRosemount, having model no. 275,375,475
etc.
To guidethe workerand technician for completing jobs in proper rand appropriate manner also
guidethe crew to worksafetyand completework within stipulated time to collect technical data
from the engineers and guide the work force to implement it.
Involve in instrumentation work fabrication & installation JB & panel frame, instrument
stanchion (stand) canopy asinstallation fabrication & & modification job impulse line, ¼ to 1” SS
tubing copper tubing (seam and seamless) on control valve, ESD valve, chirp valve etc.
Activities establish & maintain effective and efficient work inter face with the company site
representative and all direct reporting staff. Attend daily meetings with group member to
achieve daily.
Involve in cable meggering (IR test) continuity testing, cable laying, cable dressing, tagging,
Glanding clumping & termination and loop checking etc
Involvein all kind transmittercalibration in calibration lab and field PCV, FT, PT, TT, DPT FIC,PIC,
TIC, TG, PG, PDI I/P etc.
Involve in installation of marshalling cabinets, DCS, ESD, F&G, Cansool panel also termination
internal wiring internal wiring in those panel as per vendor modification of all interface system
with field instrument etc.
Involve in installation and fabrication of cable tray main run and home run such as ladder tray,
punching tray, duct tray, fiber tray and angle tray etc.
Installation of FF cabinets, instrument JB with FF bus system instrument stanchion, JB frame
valve position etc with according to field control drawing.
Installation of impulse tubing of transmitter due to mechanical point up to cabinet and
instrument as per hook up and according to field recommended.
Installation of all kinds conduit above ground underground and PVC embedded conduit.
Grounding work cad weld, cathodic system and lighting protection work.
Testing and commissioning of fire & gas detection system which include smart fire and gas
detector.
Provide technical support during pre commissioning & commissioning activities for start up and
to prepare punch list item prior to testing of system.
Implementcompany rulesand regulation and safety working procedure. And arrange safe work
permit like cold work hot work and confined space entry.
Related of instrumentation dead weighttester.Hartcommunicator,multimetter,loop calibrator,
druck calibrator, hydraulic calibrator, pneumatic calibrator, temperature bath 24 volt DC
regulator, and nitrogen cylinder setup etc.
Ensureall assigned activityand operation comply with applicable standard & national code and
regulation laws.
Improve the performance of construct activities without compromising company HSE policies
and practices.
Coordinatewiththesafetyengineerfor any safety training and ensuretheemployerattendance.
Assure that site equipment are in a good condition and necessary safety measure is observed
prior to its used.
Knowledgein safetyworkauthorization systemlike cold work, hot work & confined space entry.
Additional training in lock out & tag out procedure.
4. EXPOSURES
:- Co–ordinatedaily inspection activities with sub contractorQCInspector.
:- Co–ordinatedaily inspection activities with the clients QC Inspector.
:- Co–ordinatewiththe Construction sitesupervisorwith respectto inspection activities.
:- Checkconstruction workasper projectspecification & approved standard drawing.
:- Discuss unsafeconstruction workatsiteforimmediate action.
:- Review method statement,Quality Control.Procedures&Inspection testProcedures.
:- Daily surveillance inspection atsite / preparesurveillanceReport.
:- Review on daily R.F.I.(RequestforInspection) submitted by thesub – contractorand
construction.
:- PrepareNon – ConformanceReport(NCR)/PreparePunch List items with regardsto inspection
activities.
: -PrepareDatabaseInspection report/Monitoron databaseinspection status.
:- Review on inspection test reportsubmitted by the sub–contractor.
:- Review on Loop folders/Attend daily QCMeeting.
:- Attend weekly QC Sub–Contractorsmeeting.
:- Witness theall electrical test and preparedocumentasper ITPform.
:- Followup the projectMAPSystem.
:- Handoverall the documentsasperMAPSystemto WINPCS.
:- Abovemention activitywe follow standard codelike
IEC, NEC,ANSI,APIand ISO:9001, ISO:9002 ISO:9003etc.
CAREER TRACK
:- instrumentation works,construction,Pre–Commissioning,Commissioning
:- Work forOil, Gas, Petrochemical,Fertilizer and IndustrialPlants.
:- Preparation of Manpowerloading and workscheduling.
:- Review of Instrumentation construction drawings.
:- Implementation of QCPduring Pre-Installation,Installation and PostInstallation.
:- Generating Technical Queries and RequestforInspection.
:- CounterChecking Materialspecification prior to installation.
:- Preparation atDaily Progressreportcoordinating with variousdisciplinesto ensureproper
workflow.
: -Preparation of As–BuiltDrawings.
: -AsQCInspector,Monitoring and Implementation of following activitiesduring construction.
:- Installation of all fields mounted instruments,DCSConsoles,Marshalling Cabinets,ESD
Panels,Fire &Gas panels.
:- Panels,Switchgears,Transformers,Relay Panelsand PLCPanels.
:-Loop check,Pre commissioning of all controlloopssuch as open loops,closeLoops.
:-PLCSystem,Troubleshooting and inspection of cabletray,cable glanding,Cabletermination,
tubeinspection.
Date: Mohd Jamal Aktar
Place:Mumbai Signature of Appicants