Muhammad Nouman is an E&I Engineer with over 3 years of experience in Saudi Arabia. He has a Bachelor's Degree in Electrical and Electronics Engineering. His most recent role was as an E&I Engineer from May 2015 to March 2016 for Ever Green Contracting East, where he was responsible for inspection, testing, and commissioning of electrical and instrumentation systems for an oil and gas pipeline project. He is proficient in English and seeks the position of E&I Engineer on a new project.

1. PROFESSIONAL RESUME FORM
FOR KEY PROJECT PERSONNEL
1. Candidate’ Name Muhammad Nouman
2. Proposed Project Position E&I Engineer
3. Candidate’s Employer: (Company filling the
proposed position)
Ever Green Contracting Est.
4. Date candidate will be assigned to this project June-2015
5. Confirmation of Candidate’s capability in
written and spoken English
Excellent
6. Candidate’s current job title E&I Engineer
7. Number of years candidate has been in
current job title and salary code (month/ year-
from/to)
3 years
8. Current work location Kingdom of Saudi Arabia
9. Educational qualifications (specify university
and college degrees, discipline emphasis, as
applicable, and professional certifications held
by each candidate)
Bachelors Of Engineering
|| Electrical & Electronics ||
10. Professional work experience: list work
experience for last 10 years in descending
order for each job title held for each
candidate, as following
10.1 Since employment with Bidder, provide the following
Job History
Organization: Ever Green Contracting East
Project: JUMPOVER AT KM-152
HDUG-1 PIPELINE
Position: Worked as E&I Engineer
Duration: May 2015, to March/12/2016
RESPONSIBILITIES:
 Review Plans & Drawings in accordance with specification, code and standards.
 As per International & Saudi Aramco Standards, Specification, Instrument Calibration
Method of Statement & as per approved project drawings supervised, Inspected &
witnessed calibration workshop, Instrument cable duct bank, cable pulling from PIB’S to
Junction boxes and Junction boxes to fields instruments, Inside Plant.

2.  Involved in FAT (Factory Acceptance Test) & SAT (Site Acceptance Test) activities.
 Inspectionand witness of Cable Megger & continuity test before termination cable & then
cable termination check, to verify exact termination point of each cable core as per
approved wiring drawing, core maker & tightness of cable.
 Inspected and witnessed installation and mounting of Marshalling Panels, Junction Boxes,
instrument devices such as level, Temperature transmitters, Flow Transmitters, Pressure
Transmitters,Control valves& switches of all parameters like pressure, level, temperature
flow.
 Worked for loop checking, interlock check, P&ID, ILD, Data sheet.
 Prepared Punch list for the activities carried out by construction group.
 To verify the latest revision of the Issued For Construction (IFC) drawings as per the
Engineering drawing register.
 Verify the Controlledcopyof the latest Project Specifications, approval of the Inspection &
Test plans (ITP’S) , Quality Control Procedures (QCP’S) etc. prior to start up of the work.
 Termination and Installation of Cable & Conduit.
 Support Fabrication of Instrument and Electrical Equipments.
Alignment of Panel, Marshalling Boxes, Mounting of Instrument devices
Such as: Pressure, Level, Flow, Temperature Transmitter, Pressure Switches and
Temperature Switches, Cable Pulling from control room to JB’S then JB’S to field
instruments.
 Review the Proposal Drawings:
(Equipment’s Layout , Cable Routing Plan, Cable & Conduit Schedule, Interconnection
Diagrams, Segment , Isometric & Instrument Logic Diagrams etc.)
 Execution and Termination of Power and control Cables, Field junction boxes,
Local Control Panels (LCP) , Marshalling Cabinet and all Field Instruments.
 Prepare the Instrument Loop Packages with IFC drawings.
 Installation Inspection and functional test of ESD, DCS with vendor.
 Preparing as Build Drawing. Works with vendor technical representatives to resolve
equipment technical Problems.
 Overall responsible for commissioning and pre commissioning activities of all field
instruments,Alsoresponsible forexecution of all fieldinstrument forthe project, installation
of instruments in the field.
 Installation of Cable Trays inside & outside of the service buildings (Horizontal & Vertical
withcomplete accessories(H&V Tee,Elbow,Cross,Reducer,BlindendPlates, Splice Plates
(Type:Expansion,Adjustable single &Double bolts,Stepdown,Cover, Offset Reducing etc.)
 Responsible for the all Instrument activities during bypass line, by pass mode and final
construction shutdown in Plant.
 Cable Laying and Trenching of different sizes power and instrumentation cables as per
international standard
 In-charge of the Instrument loop check team during final construction shutdown.
 In-charge of the commissioning team from the contractor side during shutdown.
 Make and Verify as build drawings according to field requirement.
 Installation of tubing fitting of field instruments.
 Construction Execution Record (Instrument, Electr

3.  Operating Instruction Manuals (Electrical, Instrumentation & Mechanical)
 Red-Lined / As-Built Project Construction Drawings
 Red-Lined / As-Built Vendor Equipment Drawings
 Equipment Specification Sheets
 Design Calculation Books (DCB) for Electrical.
 Preparation of Status reports for Red-Line / As-Built Drawings & Project Record Books to
present Saudi Aramco PMT & Proponent for their review & further necessary action
 Execution of all site activities as per Drawing
 Co-ordination with Client for Inspection & testing
 The activity include Construction of Oil & Gas sector & submission of final dossier for
the Project.
 Execution as per standard and specification.
 Execution of Electrical & instrument equipments:
Cable trays, Junction boxes, Conduit , Local Control Panels, HV & LV Cables
termination and field instrument installations.
 Execution of Motor & Lightening Panels.
AreaResponsibilities
 Maggering, continuity and start up of all electrical and instrument systems
 Responsible for ensuring that the construction method is in line with quality
inspection plans and procedure.
 Review as built drawings and submit to client inspection department.
Training Certificate
 Saudi Aramco work permit receiver ID from Saudi Aramco Engineering Division
Department.
 Power and Control Cable Testing Training.
 High Voltage cable testing training.
 Electrical Safety Training.
Educational Qualifications
Bachelors of Engineering (Electrical & Electronics)
Attested by: Pakistan Engineering Council Islamabad,
Higher Education System and Foreign Ministry Of Pakistan
Hyderabad, Sindh Pakistan
Personal Profile
Father's Name: Muhammad Farooque
Religion: Islam
Nationality: Pakistani
Iqama No: 2386764670
Marital status: Single
Mob: +966-59-1121988
E-mail: muhammad_nouman89@yahoo.com