TECHNICAL SKILLS: Transmitters & Switches - Foxboro, Honeywell, Rosemount, Yokogawa and Daniel. Control Valves & Pressure safety valves - Fisher, Masoneilan. Emergency Shutdown Valves – Fisher, Neles. PLC - Siemens, Hima, ICS Triplex, Allen Bradley & ABB. DCS - Rosemount RS3, Emerson DeltaV, Honeywell-TDC3000, Foxboro. F&G and H2S system – GE Fanuc, ICS Triplex. COMPUTER KNOWLEDGE • AutoCAD (2D / 3D) • Plant Design Management System (PDMS) • Navisworks Manage/Freedom • Microstation v. 8.1 • PDS (EE raceway & Equipment modeling) • SP3D (Smart Plant 3D) • Smart Plant Review • Smart Plant FreeView TECHNICAL / PROFESSIONAL TRAINING: • Designer training -V.I.T Pune • PDS training -ROLTA Delhi. • INTOOLS 7.0 -ROLTA Delhi. • AUTOCAD – 2D drafting • Microstation-2D drafting.

1. CAREER SUMMARY:
Electrical Engineer in Offshore Electrical Engineer Design having 12.6+
years of experiences in Electrical Design with various onshore/offshore projects as well as
fabrication yard.Job encompasses of reviewing and interpreting of relevant documents such
as specifications, data sheets and vendor data prior to the application of design work
procedures for the preparation of electrical deliverables and adept in AUTOCAD software
and Microsoft Applications. Possesses good oral and written communication skills.
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:
WORK EXPERIENCE:
Electrical Engineer
Keppel Singmarine Pte Ltd
1. H381 DLV2000
2. BSY H105 38m Crewboat (80 Pax)
3. H387_388 65T BP Tug
4. H390 RAmpage 5500 100T AHT
May 2015 to DEC 2015
Keppel O&M, integrating the experience and expertise of Keppel FELS, Keppel Shipyard,
Keppel Singmarine and its yards overseas, was established in 2002.
A wholly-owned subsidiary of Keppel Corporation, Keppel O&M is one of the largest offshore
and marine groups in the world. It has a strategic network of 20 yards serving regions
including Asia Pacific, Gulf of Mexico, Brazil, Caspian Sea, Middle East and the North Sea.
In Floating Production Storage and Offloading (FPSO) and Floating Storage and Offloading
(FSO) conversions, Keppel O&M is also the world leader.
It is a leading ship repairer for LNG and LPG carriers and a niche player in specialized
conversions and construction.
Its expertise in specialized new building extends to a wide range of small to medium-sized
customized vessels including Anchor Handling Tug Supply vessels, multipurpose support
vessels and cable ships for a worldwide clientele.
Candidate Name Munirathinam Veerabharathi
Position Applied for Senior Electrical Engineer
Nationality & Visa Status in SG Indian & Employment Pass (G5315941P)
Date of Birth 07.06.1987
Education
DIPLOMA IN ELECTRONICS AND COMMUNICATION
ENGINEERING
B.LIT (TAMIL) – DEGREE
MASTER BUSINESS ADMINISTRATION
Mobile No & E-mail id +65 83487456/+65 90366455 & VEERA153755@GMAIL.COM
Availability Immediately

2. Committed to on-time and on-budget deliveries, Keppel O&M is the Provider of Choice for the
global offshore and marine industry.
Projects : FSO H381 DLV 2000 – Lukoil, Multi-Purpose Ice Breakers, Offshore AHTS Supply
Vessels,
Ice Class AHTS Vessel, Multi-Purpose Platform Vessel, DP II Derrick Pipe lay Vessel
Job Title : Electrical Engineer.
Roles & Responsibilities
Leading project in designing detailed electrical drawings for site installation like cable ladder
routing & penetration layout, engine control room and bridge control consoles equipment layout &
General Arrangement layouts. Attend the meeting with Project teams, Owners and surveyors.
-Electrical Discipline Lead for Statoil V&M projects leading a multi-cultural team environment of
engineers and designers.
-Responsible for supporting and mentoring discipline responsible engineer, ensure that all deliverable
are completed on time, in accordance with the project schedules and that the work is done according
to specified quality.
-Responsible for the preparation for study reports, work packages, and detailed engineering activities
for both offshore and onshore maintenance and modification projects for various clients platforms and
onshore plants in Norway.
-Define, budget, schedule, execute and co-ordinate all activities within own areas of responsibility.
-Participate in system design and or 3D model reviews and HAZOP's as required in the project.
-Define and request required resources within discipline group.
-Establish, implement and maintain procedures and work instructions required with in the discipline.
-Perform inter-discipline checking (IDC) of other disciplines information when applicable for the
discipline scope of work
-Dimensioning and calculation of electrical networks (High and Low voltage) and perform Febdok
calculations
-Co-ordinate electrical design within own discipline and on a multidiscipline level.
-Administration of tags in EIS (set up, define control objects, link to activity, data input etc., with
respect to Provision)
-Administration and update of Client systems (STID, ProCosys, Cabsys and SAP)
-Inputs, review, approved and follow up of vendor documentations.
-Prepare Technical Requisitions for procurement electrical equipment and provide input to other
discipline technical requisitions.
-Ensure that all relevant information modelled in PDMS, providing the correct status in the PDMS

3. database such that this information can be transferred to relevant engineering databases where
progress are monitored.
- The management and supervision of personnel assigned to support the job holder
- Execute and co ordinate all activities under the job holder's responsibility
- Assist the lead Engineer in defining scope and schedule under the job holder’s responsibility
- Production, Modification and review of documents and drawings as per discipline deliverable list
- Carrying out all tasks assigned by superior in accordance with the discipline procedures and
practices
- Carrying out discipline internal check and put up for approval produced documents and drawings
- Carrying out supply chain / site support activities as per project requirements
- Carrying out site supervision of construction, installation, testing, commissioning and handover
activities as directed by the superior
- To carry out / involved in 3D and /or 2D design and model reviews
- QHSE and improvement of the discipline work processes and procedures within his area of
responsibility
- Supporting the project organization in meeting project objectives along with other team members
- identifying external interfaces and supplying timely information
HVAC DRAWINGS PREPAREATION
H381-E655.01 REFRIGERANT DETECTION SYSTEM
H381-E655.02 Chiller System Electrical Diagram
H381-E655.03 HVAC System Accomodation Area (AHU)
H381-E655.04 HVAC System Machinery Area (AHU)
H381-E655.05 HVAC System Fan Coil Contorl Units
H381-E655.06 HVAC System AC Package Unit (3 Sheets)
H381-E655.07 HVAC System AC Split Unit
H381-E655.08 HVAC System Shutoff Damper Control Panel
H381-E655.09 HVAC System Machinery Area Ventilation Fan Panel
H381-E655.10 HVAC System Machinery Area Group Ventilation (Fan)
H381-E655.11 HVAC System Refrigeration Plant (Cold Room)
H381-E655.12 HVAC System Reheater
H381-E655.13 HVAC System Engine Room Fan Control Panel (VFD)
H381-E655.14 HVAC System E-Gen HVAC Room Panel
H381-E655.15 HVAC System HVAC Control Panel
H381-E655.16 HVAC System Water Tight Valve Control Diagram
HVAC systems - Sequence of Operations
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:

4. ELECTRICAL DESIGN ENGINEER
DYNA-MAC ENIGNEERING PTE LTD
Duration: Mar 2014 to Mar 2015
Dyna-Mac Engineering Services Pte Ltd – SINGAPORE
(DME-JNS728-JNS732) Kraken FPSO - BAB 002 1020
Client: FPSO BUMIARMADA
(DME-JNS642-JNS678) FPSO CIDADE DE MARICA- HI 39621
Client: FPSO SBM OFFSHORE
(DME-JNS659-JNS680) FPSO CIDADE DE SEQUAREMA- HI 39622
Client: FPSOSBM OFFSHORE
(DME-JNS631-640) FPSO STONES - HI 39600
Client: FPSO SHELL STONES
(DME-JNS708-JNS717) TEN Development Project - FPSO Package
Client: FPSO MODEC
(DME-JNS728-JNS732) Kraken FPSO - BAB 002 1020
Client: FPSO EQ KRAKEN
UZ750-P6059 ZADCO Island Development-PAU's
Client: PEROFAC
(DME-JNM722-JNM724) B357 & 360 & 361 - Keppel Fels B class
Client: FPSO KEPPEL FELS
(DME-JNS728) - M30A Seperation Module
Duties & Responsibilities:
WORKING AS ELECTRICAL ENGINEER/3D MODELLER & RESPONSIBLE FOR THE COMPLETE 3D
MODELLING OF CABLE LADDERS/TRAYS & LADDER, ELECTRICAL EQUIPMENTS, TELECOM CABLE
TRAYS & TRAY SUPPORTS, TELECOM EQUIPMENTS.
ACTIVELY INVOLVED IN THE PREPARATION OF LAYOUTS FOR E-HOUSE & INTEGRATION B/W E-
HOUSE TO OTHER TOPSIDE MODULES & ACCOMMODATION MODULES.
PREPARATION OF ELECTRICAL CABLES AND CALCULATION. HV, LV,CABLES, CONTROL,
INSTRUMENTATION AND SIGNAL CABLES, CABLE LADDERS, PANEL INSTALLATION, FIELD
INSTRUMENTS & EQUIPMENTS ARRANGEMENT, DISPOSITION, SINGLE LINE DRAWINGS & CONSOLE
ARRANGEMENT DRAWINGS, TELEPHONE, CCTV, LAN, LIGHTING, ALARM MONITORING, STARTER
CONTROL PANEL DRAWINGS, CABLE TERMINATION DRAWINGS, REMOTE CONTROL VALVE SYSTEMS
AND ALL THE SHIPPING ELECTRICAL, CONTROL, INTERFACE AND COMMUNICATION SYSTEMS
DRAWING AS FOLLOW VENDORS AND CLIENTS. ( USED AUTOCAD, PDF, MS -OFFICE)
INVOLVED IN THE PREPARATION OF CABLE TRAY SIZING, CABLE SCHEDULE & MTO.
CO-ORDINATION WITH CLIENT FOR DETAILS PERTAINING TO THE MARINE CABLES & UPDATING THE
SM3D MODEL.
VENDOR DOCUMENT REVIEW FOR HEAT TRACING PACKAGE.
ADDRESSING SITE QUERIES.

5. EXTRACTION OF CABLE LADDER/TRAY LAYOUTS FROM PDMS & PREPARATION OF LAYOUTS.
CO-ORDINATION WITH VENDORS FOR DOCUMENT UPDATIONS.
INVOLVED IN THE PREPARATION FOR ALL ELECTRICAL & TELECOM EQUIPMENTS IN LQM DURING
THE LIFTING OF LQM.
ADDRESSING SITE QUERIES & RESOLVING SITE PROBLEMS BY PROVIDING ADDITIONAL DETAILS AS
EARLY AS POSSIBLE TO AVOID LAG IN CONSTRUCTION PROGRESS
UPDATING AS-BUILT MODEL & LAYOUTS
EXTRACTION OF CABLE LADDER/TRAY LAYOUTS, LIGHTING LAYOUTS, POWER LAYOUTS,
INSTALLATION DRAWINGS FROM SM3D & PREPARATION OF LAYOUTS.
CO-ORDINATION WITH VENDORS.
WORKED AS 2D DRAUGHTSMAN AND INVOLVED IN PREPARATION OF DELIVERABLES WHICH
INCLUDES
⇒ CABLE TRAY & SUPPORT LAYOUTS
⇒ LIGHTING LAYOUTS.
⇒ POWER & CABLES CALCULATIONS HV AND LV CABLES EARTHING LAYOUT.
⇒ SINGLE LINE DIAGRAMS
⇒ INTERCONNECTION SCHEDULE
⇒ LIGHTING & SMALL POWER LOOPING DIAGRAMS
⇒ INSTALLATION DRAWINGS.
⇒ MCT SCHEDULE
⇒ MTO/BOM FOR ALL ELECTRICAL ITEMS.
⇒ SINGLE LINE DIAGRAMS.
⇒ CABLE BLOCK DIAGRAMS.
⇒ TELECOM BLOCK DIAGRAMS.
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:
ELECTRICAL DESIGN ENGINEER
AIBEL PTE LTD – SINGAPORE
JUNE-2012 to FEB 2014
• ELECTRICAL PHYSICAL DESIGN.
• CONVERSANT WITH SHELL & OTHER STANDARDS.
• ANALYTICAL SKILLS.
• ABLE TO WORK ON OWN INITIATIVE AND AS PART OF A TEAM.
• DEDICATED TO MAINTAINING HIGH QUALITY STANDARDS.
• PROFICIENT WITH AUTO CAD, MICRO STATION, PDMS & PDS, SP3D & SPEL.
• DESIGN AND PROBLEM SOLVING SKILLS.
Duties & Responsibilities:
Power System Studies on ETAP : Load flow analysis, Short circuit study , Transient stability study,
Relay coordination study including relay settings

6. Calculations : Various Electrical Equipment Sizing mainly Generator, Transformer, Power Cables,
Neutral Earthing Resistors, UPS and Battery.
Various Electrical Deliverables during the phase of a project as mentioned in the Projects below,
Vendor Data Review for major electrical equipment like Generators, HV Switchboard etc.
Codes and Standards
Good Knowledge of NORSOK, IEC standards and DNV codes related to Offshore Electrical Design
and various Electrical equipment. Familiar with various other standards like IEEE, RMRS, Brazilian
NR requirements etc.
Worked with various Company Standards and Practices mainly SHELL DEPs, BG Standards, Conoco
Philiphs , Statoil General Standards, Petrobras standards etc.
MAIN EXPERIENCES:
Project – AIBEL PTE LTS
Client – ConocoPhillips (NORWAY)
1. Design of LV Distribution system for the whole Topsides and Marine side which consists of LV
system, Emergency System, Small power system, Lighting, Earthing, Power, UPS system.
2. Preparation of deliverables which includes Electrical Design philosophy, Induction Motor
Specification, LV Switchgear specification, Transformer Specification, UPS Specification, Cables
Specification, single line diagram for all LV System, UPS System, Electrical Load Analysis based on
process data, Preliminary Short Circuit Calculation (MVA Method), Cable sizing & Voltage Drop
Calculations.
3. Electrical Packages & UPS Package Technical bid Evaluation, Vendor Selection, Vendor Package
review
4. Protection Relay Co-ordination / Selective Co-ordination & Protection Settings and Time Current
Curves for LV system.
5. Preparation of Cable Schedule, Cable Block Diagram & Interconnection Diagram
6. Electrical / Package Engineer for Turret and Laboratory.
DESIGN EXPERINCE:
1.PDMS Checking / Modeling (Cable Tray, Lighting & Equipment)
2.Cable Tray modeling – Checks the quality of the 3D model in terms of
Cable Routing and supports requirement details.
3.Clash Review - Coordinates with client and other disciplines regarding
Clashes and interference between electrical and other equipment
(Piping, Civil Structural, Mechanical & Instrumentation)
4.Aveva Review - Aveva checking for 3D design input.
5.Handling team to give input to prepare layouts, attending model review
and Inter discipline meeting.
6. Smart Plant Electrical
a) Adding Electrical and Wiring Equipment in Electrical index
b) Creating connection in Electrical Engineer
c) Updating and Modifying properties in Table
7. Creating Nodal in PDMS Model and preparing Nodal Drawings
8. CABSYS (Cable routing software for Statoil)
9. Interconnection Diagram
10. MCT Calculation from Roxtec software

7. ENGINEERING PROJECTS EXPERIENCE IN INDIA
L&T VALDEL
ELECTRICAL ENGINEER
FEB 2010 to JUN 2012
Project: M/s. ADMA-OPCO, Abu Dhabi
PROJECTS INVOLVED (L&T VALDEL ENGINEERING LIMITED):
ELECTRICAL ENGINEER for UMM LULU PHASE-I DEVELOPMENT PROJECT
(Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
Job Profile:
• Program Development in PLC’s Allen Bradley, Siemens, Mitsubishi and Troubleshooting and
redesigning. Exposure of VFD Allen Bradley, Powerflux40 and Delta drives.
• Installation and Commissioning of Control Panel and Field Instruments.
• Calibration of Electrical and Electronics instruments and Equipments.
• Preventing Maintenance of Machines.
• Troubleshooting skills with knowledge of Instrumentation Systems & Electrical machineries.
• Weigh scale installation and commissioning.
• PLC, HMI selection as per the system requirement.
• Instrumentation selection as per the system requirement.
• Motors, pumps, Diesel Generators, CNC machineries servo motors, Drives, alarms, sensors,
solenoid valves, hydraulic systems & Air compressors, plc based automations assembly rigs,
Troubleshooting and
• Communication Protocol :- (Ethernet , Mod bus, Serial, RS232 series)
• Panel & Console drawings
• Wiring drawings
• Nest Loading & Front Loading

8. • Cable tray layout
• System Configuration & Control room layout
• Field ELECTRICAL & INSTRUMENT drawings
• Pre-Fab Cable Schedule
• Grounding layout
• Yokogawa control system drawings
• Field Cable Schedule
• Loop schematic drawings
• Preparing shop drawings, 2D and Isometric drawings for various Electrical & Mechanical
projects in Autocad.
• Job includes site supervision of installation, ensuring safety procedures are followed in
project, organizing man power in site, raising material request required at site and
ensuring project execution as per drawings and bar chart.
• Effective co-ordination with clients & consultants detailing them on project progress.
• Assisting Estimation team by providing BOQ as per available tender drawings and site
survey
ELECTRICAL ENGINEER for NASR PHASE-I DEVELOPMENT PROJECT (Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
• Preparation of overall cable tray layout & Sectional Drawings
• Interconnection cable routing
• Loop schematic drawing
• ELECTRICAL & INSTRUMENT Location layout
• Control Room layout
• System Configuration
• JBPDB Location layout

9. • Function Schematics
• Installation Drawing
• Loop Drawings
PROJECTS INVOLVED (L&T VALDEL ENGINEERING LIMITED):
• ELECTRICAL ENGINEER for NASR PHASE-I DEVELOPMENT PROJECT (Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
• ELECTRICAL ENGINEER for UMM LULU PHASE-I DEVELOPMENT PROJECT (Brown Field)
Client: M/s. ZADCO / ADMA-OPCO, Abu Dhabi
• ELECTRICAL ENGINEER and EPC for PUO FPSO AT INDONESIA
Client: M/s. KANGEAN ENERGY INDONESIA.
• ELECTRICAL ENGINEER For B-193 5-WELL HEAD PLATFORM
Client: M/s. ONGC.
• ELECTRICAL ENGINEER For Offshore Grid Interconnectivity Project - Power to ESP
Client: M/s. ONGC.
• ELECTRICAL ENGINEER for TSJOC SRKP PHASE I DEVELOPMENT PROJECT
Client: M/s. Truong Son Joint Operating Company (TSJOC).
• ELECTRICAL ENGINEER for GENERIC GAS FPSO - Topsides
Client: M/s. PROSAFE.
• ELECTRICAL ENGINEER for NINGALOO VISION OIL FPSO – Topsides (VME Process), Brazil
Client: M/s. VME Process, Prosafe.
• ELECTRICAL ENGINEER For OCS-1 REVAMPING PROJECT
Client: M/s.PTT Public Company Limited.
• ELECTRICAL ENGINEER For CRISTAL ROC PLANT
Client: M/s. CRISTAL GLOBAL, SAUDI ARABIA.
ENGINEERING PROJECTS EXPERIENCE IN KUWAIT OIL COMPANY:
GULF SPIC GENERAL TRADING & CONTRACTING COMPANY, Kuwait City
KOC APPROVAL ELECTRICAL ENGINEER
JAN 2008 TO JAN 2010`
Project :: Updating & As-built drawing works @ All Gathering Centers (1 to 28)
& GasBoosterStations.140.150.160.170 CIPF/SWTP in KOC. 36678
Project: FPU Joko Tole, FSO UOTE, Cluster 7 FPSO
In-charge for the review/approval of the following electrical packages: 6.6KV switchboard, 690V

10. switchboard, 440V normal switchboard, 440V essential switchboard, 440V emergency switchboard,
2MVA MV transformer, 900KW MV soft starter, 3200A Bus duct, 140KVA UPS, synchronizing panel,
LV transformers, 440V distribution boards, 220V distribution boards, lightings and etc.
Carry out review of load list, making sure that suitable feeder or starter, interface are provided in the
switchboard.
Preparation/reviewed of power management system and switchboard incomer philosophy.
Carry out review of power system study report like short circuit, relay coordination and load flow.
Coordination between client, vendor and class to resolve all technical comments arises on design
review.
Carry out review of single line diagram and termination diagram of all electrical packages.
Carry out review of e-house room layout.
Carry out review of interdisciplinary packages, checking of all interfaces making sure that all are in
accordance to technical requisition, client specifications and class rules.
Carry out review of request for quotation of switchboard, soft starter, UPS, transformer, distribution
board, motors starters, lighting fixture, wiring accessories, electrical cables and etc.
Attending factory acceptance test for switchboards, synchronizing panel, distribution boards, UPS
and transformer.
Supervise the sub-contractors for the installations of switchboards, synchronizing panel, transformer
and UPS.
Supervise the Kongsberg sub-contractor and assist the client in pre-commissioning/commissioning of
switchboard, synchronising panel, transformer, distribution board and lightings.
Coordination between Kongsberg sub-contractors, vendors, shipyard personnel, owners and class
surveyors in resolving the issues arises during testing and commissioning.
Working as Instrumentation Cad Senior Designer of Gulf Spic Trading & Contracting Company WLL,
reporting to HOD And Engineer of the Company.
Has Executed Instrumentation Design & Drafting Works in Detailed Engineering Contracts of the
Company.
Preparing Electrical drawings for Lighting layout, Small power with cable load schedule, Extra Low
voltages (Tele & Data, Fire Alarm, CCTV, etc...) and Schematic drawings.
• Substation panels, Incoming & Outgoing power cable raceway routing layout in accordance
with other services in the 3D Model to create plan & section drawings.
• Drafting of Instrumentation & Control cable Raceway layout & section details in secondary
substations & process plant Areas.
• Motor control centre (MCC) panel General Arrangement layout & MCC Panel Layout details
with three line diagram & MCC Panel cable gland details using single line diagram for all the
substations. (Total 8 Substations.)

11. • Co-ordinate with respective Design Engineer’s & Site Engineer’s to modify the existing
Design drawings by incorporating the changes mentioned on the RLM (Red Line Markup)
drawings.
• Preparation of shop drawings plan & Sections for Electrical & I&C Services.
• Preparation of As-Built drawings to the site Actual condition by taking physical
• Assist in detail engineering, design and specification of electrical & Instrumentation works
include design drafting of P&I drawing, JB Termination, Instrument Loop Diagrams, Panel
termination drawings, Instrument Process & Pneumatic Hook-Ups drawings, design drafting
of Single line diagrams.
• Preparing Drawings in AutoCAD and CAD works plant Cable tray layout
• Cable tray support layout
• Cable tray sizing
• Electrical and ELECTRICAL & INSTRUMENT cable schedule
• Lighting and small power layout
• Grounding layout
• Wiring diagram
• Connections lists
• Material takeoff and Bill of Quantities.
BAYTALKITEC (P) LTD, TAMILNADU.
ELECTRICAL ENGINEER
JAN-2003 to DEC 2007
For SAMKI TECK PYROLYSIS PLANT
Client: M/s. SAMKI TECK RESOURCES.
Bid- Support For B-193 Process Platform Project
Client: M/s. ONGC
Experience includes preparation of:
Basic Engineering / FEED which includes
Preparation of Electrical Design Basis,
Cable sizing and selection philosophy,
Lighting and grounding philosophy,
Single line diagrams,
ETAP system study,
Equipment sizing,
Preparation of specifications and datasheets,
Load analysis,

12. MTO preparation,
Estimation of man hours
Detailed engineering which includes
Preparation of Philosophies
Development of detailed SLDs,
Power and lighting layouts,
Electrical building layouts,
Lighting calculations, Heat tracing, MCT sizing,
Vendor information review for mechanical packages,
Vendor offer review for High Voltage Switchboard,
Personal Skills:
Hard Working, Willingness to learn, Time Management, Team player, Respect responsibilities
EDUCATIONAL BACKGROUND:
DIPLOMA IN ELECTRONICS AND COMMUNICATION ENGINEERING
B.LIT(TAMIL) – DEGREE
MASTER BUSINESS ADMINISTRATION
KNOWLEDGE AND SKILLS
• AUTOCAD (2D / 3D)
• PLANT DESIGN MANAGEMENT SYSTEM (PDMS)
• NAVISWORKS MANAGE/FREEDOM
• MICROSTATION V. 8.1
• PDS (EE RACEWAY & EQUIPMENT MODELING)
• SP3D (SMART PLANT 3D)