Methods of heat transfer
•Download as PPTX, PDF•
0 likes•103 views
This document discusses the three main methods of heat transfer: conduction, convection, and radiation. Conduction occurs when two objects touch and heat transfers from warmer to colder. Convection involves the transfer of heat by a circulating fluid (liquid or gas). Radiation can occur through empty space by electromagnetic waves. Examples are provided to illustrate which method is demonstrated in different scenarios involving heat transfer.
Report
Share
Report
Share
Recommended
3+types+of+heat+transfer
There are 3 types of heat transfer: 1) conduction, which occurs through direct contact of molecules, best in solids; 2) convection, involving up/down currents in liquids and gases due to expansion/contraction of heated/cooled molecules; and 3) radiation, occurring through open space in gases by emission of electromagnetic waves.
3 types of heat transfer
There are 3 types of heat transfer: 1) Radiation, which transfers heat through open space and only occurs in gases. 2) Conduction, which transfers heat through direct contact between molecules and can occur in solids, liquids, and gases. It occurs best in solids. 3) Convection, which transfers heat by up and down movements of heated liquids and gases through convection currents.
Heat transfer
When chocolate is held in the hand, it melts due to heat transfer through conduction. Heat always flows from hot to cold through three methods: conduction, convection, and radiation. Conduction involves the direct transfer of heat between particles in contact; convection involves the transfer of heat by a moving fluid like air or water; and radiation involves the transfer of heat by electromagnetic waves emitted by an object.
Properties of sound
The document discusses the key properties of sound:
Pitch refers to the highness or lowness of a sound and depends on the frequency of vibrations. Intensity refers to the energy of a sound wave and is measured in watts per meter squared. Loudness is a subjective measure of how loud a sound seems and is related to intensity, distance from the source, and condition of the transmitting medium. Quality or timbre distinguishes one sound from another by other characteristics beyond pitch and loudness. The document provides examples of the intensity and loudness of common sounds to illustrate these concepts.
Properties of sound
Sound reflects off barriers like walls, producing echoes. Multiple reflections in an enclosed space create reverberations. Echo sounding uses sound reflection to map the seafloor and measure ocean depths by timing echoes. Sound refracts or changes speed when moving between mediums of different densities.
Ch.12.less.2.what are the properties of sound [autosaved] [recovered]
This document discusses the properties of sound. It explains that sound is a type of energy that travels through matter in longitudinal waves of compression and rarefaction. It moves through solids fastest and gases slowest. Echoes are sounds waves that reflect off surfaces. Covering rooms in soft materials helps absorb sound waves and reduce echoes by transferring the wave's energy into thermal energy. Pitch is how high or low a sound is and is related to frequency, or the number of vibrations per second. The Doppler effect changes a sound's pitch depending on whether the source is moving toward or away from the listener. Amplitude refers to the density of compressions and rarefactions in sound waves.
Cpl Science, Engineering & Construction Brochure 2014
CPL Science, Engineering, Supply Chain and Construction provides recruitment, staffing, and outsourcing services. They specialize in recruiting for science, engineering, supply chain, construction, and property-related roles. They offer permanent, temporary, and contract recruitment solutions tailored to clients' needs. Their expert consultants have in-depth knowledge of different industries. CPL uses a strategic partnership approach, a large database of candidates, their popular website, and specific selection processes to quickly find the best people for clients' jobs.
When is a U value real?
As a designer or specifier you will set U value requirements for elements of your building in order to meet Building Regulations, ensure comfort and avoid condensation.
Recommended
3+types+of+heat+transfer
There are 3 types of heat transfer: 1) conduction, which occurs through direct contact of molecules, best in solids; 2) convection, involving up/down currents in liquids and gases due to expansion/contraction of heated/cooled molecules; and 3) radiation, occurring through open space in gases by emission of electromagnetic waves.
3 types of heat transfer
There are 3 types of heat transfer: 1) Radiation, which transfers heat through open space and only occurs in gases. 2) Conduction, which transfers heat through direct contact between molecules and can occur in solids, liquids, and gases. It occurs best in solids. 3) Convection, which transfers heat by up and down movements of heated liquids and gases through convection currents.
Heat transfer
When chocolate is held in the hand, it melts due to heat transfer through conduction. Heat always flows from hot to cold through three methods: conduction, convection, and radiation. Conduction involves the direct transfer of heat between particles in contact; convection involves the transfer of heat by a moving fluid like air or water; and radiation involves the transfer of heat by electromagnetic waves emitted by an object.
Properties of sound
The document discusses the key properties of sound:
Pitch refers to the highness or lowness of a sound and depends on the frequency of vibrations. Intensity refers to the energy of a sound wave and is measured in watts per meter squared. Loudness is a subjective measure of how loud a sound seems and is related to intensity, distance from the source, and condition of the transmitting medium. Quality or timbre distinguishes one sound from another by other characteristics beyond pitch and loudness. The document provides examples of the intensity and loudness of common sounds to illustrate these concepts.
Properties of sound
Sound reflects off barriers like walls, producing echoes. Multiple reflections in an enclosed space create reverberations. Echo sounding uses sound reflection to map the seafloor and measure ocean depths by timing echoes. Sound refracts or changes speed when moving between mediums of different densities.
Ch.12.less.2.what are the properties of sound [autosaved] [recovered]
This document discusses the properties of sound. It explains that sound is a type of energy that travels through matter in longitudinal waves of compression and rarefaction. It moves through solids fastest and gases slowest. Echoes are sounds waves that reflect off surfaces. Covering rooms in soft materials helps absorb sound waves and reduce echoes by transferring the wave's energy into thermal energy. Pitch is how high or low a sound is and is related to frequency, or the number of vibrations per second. The Doppler effect changes a sound's pitch depending on whether the source is moving toward or away from the listener. Amplitude refers to the density of compressions and rarefactions in sound waves.
Cpl Science, Engineering & Construction Brochure 2014
CPL Science, Engineering, Supply Chain and Construction provides recruitment, staffing, and outsourcing services. They specialize in recruiting for science, engineering, supply chain, construction, and property-related roles. They offer permanent, temporary, and contract recruitment solutions tailored to clients' needs. Their expert consultants have in-depth knowledge of different industries. CPL uses a strategic partnership approach, a large database of candidates, their popular website, and specific selection processes to quickly find the best people for clients' jobs.
When is a U value real?
As a designer or specifier you will set U value requirements for elements of your building in order to meet Building Regulations, ensure comfort and avoid condensation.
M.Tech. Programme in Sustainable
Job Thomas, Reader in Civil Engineering
School of Engineering
Cochin University of Science and Technology, Cochin -22, job_thomas@cusat.ac.in
Dean’s Honor List - Fall 2016
This letter from the Dean of the College of Engineering, Computer Science, and Construction Management at California State University, Chico congratulates Robert Nather for being named to the Dean's List for the Fall 2016 semester for achieving a GPA of 3.5 or better. The Dean expresses that achieving academic excellence is important to the university's mission and that Robert's strong performance is a mark of distinction for the faculty. Robert is also granted a Certificate of Achievement.
Construction Engineering Technology
Information on the Construction Engineering Technology program available at Carl Sandburg College in Galesburg, IL.
See Yourself at CSC
Journal of Construction Engineering Technology & Management vol 6 issue 3
Journal of Construction Engineering, Technology and Management (JoCETM) is a Journal focused towards the rapid publication of fundamental research papers on all areas of Construction Engineering, Technology and Construction Management.
Focus and Scope Covers
Planning and Management of the Construction of Structures
Design of Temporary Structures
Quality Assurance and Quality Control
Building and Site Layout Surveys
On Site Material Testing,
Safety Engineering, Materials Procurement, Budgeting & Cost Engineering
Concrete Mix Design
Technological and cross border mixture value chain of science and engineering...
Abstract This scientific paper presents in national premiere and in original multi-integrative and multi-potential concept of creation, experimentation, realization and integration on the route of the technological cross-border mixture value chain of intelligent mix-mechatronic-integronic-adaptronic products and systems / micro-nano-systems for the industry, economy and society, corresponding to the new intelligent labour jobs. Index Terms: mixture value chain; multi-integrative engineering; mix-mechatronic-integronic-adaptronic products and system
International journal of Construction Engineering and Planning vol 2 issue 1
International journal of Construction Engineering and Planning vol 2 issue 1JournalsPub www.journalspub.com
International journal of Construction Engineering and Planning
is primarily devoted to scientific articles and comprehensive reviews that are focused on the quality control, risk assessment, resource management in the field of construction engineering and planning. Journal also focuses on the production planning, critical path method that can create an impact on the ongoing research.Chapter 14 heat and heat transfer methods
1) The document discusses heat transfer and the Earth's interior. It explains that radioactivity in rocks provides the energy that keeps the Earth's interior molten, despite heat transfer to the surface and outer space.
2) It then lists the learning objectives for the chapter, which include defining heat, examining heat transfer methods, and discussing conduction, convection and radiation.
3) The introduction states that heat is a form of energy that is transferred by different methods and explains phenomena like the chill of a clear night. It notes heat transfer is fundamental and will be referred to in later chapters.
Methods of heat transfer and thermal properties of soil
1. Heat transfer in soils occurs through three modes: conduction, convection, and radiation. Conduction involves the transfer of heat between contacting surfaces of the same or different substances. Convection involves the transfer of heat by the actual movement of heated molecules within gases and liquids. Radiation involves the transfer of heat through empty space by electromagnetic waves.
2. Key thermal properties of soils include specific heat, thermal conductivity, and thermal diffusivity. Specific heat refers to the amount of heat required to change a substance's temperature. Thermal conductivity measures a material's ability to conduct heat. Thermal diffusivity indicates a material's ability to conduct thermal energy relative to its ability to store energy.
3.
Metals aug. 4
The document provides information about various metals used in construction, including their properties and common applications. Aluminum is discussed first, noting its light weight, corrosion resistance when anodized, and common uses in building elements like doors, windows and siding. Other metals covered include iron, steel, copper, brass and lead along with their characteristics and typical structural and architectural applications.
Energy Flow In Ecosystems
The document discusses energy flow through ecosystems and food webs. It provides several field notes describing relationships between different organisms, such as plants being eaten by herbivores or smaller organisms being eaten by larger predators. It then explains that as energy moves through food chains and webs, the vast majority (around 90%) is lost as heat, so there is only about 10% of the original energy available at each trophic level. This pattern can be represented through an energy pyramid diagram.
Thermoregulation
The document discusses how the hypothalamus regulates body temperature through increasing or decreasing mechanisms in response to heat or cold. In hot conditions, the hypothalamus triggers sweating and vasodilation to cool the body, while in cold conditions it causes piloerection, vasoconstriction, shivering and metabolic heat production to conserve heat. The hypothalamus integrates input from thermoreceptors in the skin and blood to maintain core temperature within a narrow range.
Cpgp day01-session 5 - drawing a process flow diagram 2012 final
A process flow diagram (PFD) visually depicts the steps in a process sequentially. It uses simple symbols like rectangles for process steps and arrows to show material and information flow. A PFD for a peanut processing operation is presented as an example. The key steps shown are storing raw peanuts, de-shelling, sorting, and frying. Inputs and outputs at each step are indicated with arrows, such as electricity and coconut oil used for frying. The PFD ends by showing the finished product of fried salted peanuts. Guidelines are provided for continuing a PFD across multiple pages and depicting auxiliary and repeated processes.
Reflection Of Sound Part 2
The document discusses several topics related to sound:
1. Reflection of sound follows the same laws as light reflection, with the incident, reflected, and normal waves lying in the same plane. Echoes are produced by sound reflections off large, hard, smooth surfaces.
2. Reverberation occurs when the original and reflected sounds are so close in time that they cannot be heard separately, making the sound seem prolonged.
3. Applications of echoes include locating submarines, fish shoals, and sunken objects underwater through echolocation.
Timber DEFECTS
Defects in timber lower its strength, durability, utility, and appearance. Defects are caused by natural forces, insects, conversion processes, seasoning, and fungi. Common defects include knots, shakes, twisted fibers, staining, and rot. Defects are classified based on their origin and impact wood properties and usability. Thorough inspection allows identification and appropriate use of timber despite defects.
Milk the complete food
- Milk comes primarily from cows but also from sheep and goats. Soy milk is used by vegetarians.
- Milk provides protein, fat, carbohydrates, vitamins, and minerals like calcium. It is especially important for growth, repair, and bone health.
- Milk undergoes processes like homogenization, pasteurization, and ultra-heat treatment to kill bacteria and extend shelf life. It is stored refrigerated in clean containers.
11 conversion of timber
This document discusses different methods for converting logs into timber. It describes felling timber and transporting logs. It then explains four methods for converting logs: horizontal bandsaw, through and through sawing, quarter sawing, and tangential sawing. For each method, it provides the advantages and disadvantages. An exam question is included that asks the reader to name the conversion methods shown in diagrams, state the advantages and disadvantages of each, and determine which board shown is most likely to cup and why.
Methods of heat transfer
The document discusses three main methods of heat transfer: conduction, where heat travels through solid materials; convection, where heat travels with moving air or liquids and sets up currents; and radiation, where heat travels in rays like from the sun and occurs during grilling without the food touching the heat source. It also covers different cooking methods like roasting, frying, boiling, and baking, as well as microwave cooking which uses electromagnetic waves to cause particles to vibrate and build heat inside food.
cathodic protection
The document discusses cathodic protection methods for corrosion control. It describes two main types of cathodic protection - sacrificial anode and impressed current. Sacrificial anode uses more reactive metals like zinc or aluminum as anodes, while impressed current uses an external DC power source and insoluble anodes like graphite. Common applications include protecting pipelines, ships, and marine structures. Issues that can arise include hydrogen embrittlement, cathodic disbonding, and safety concerns with rectifiers.
02-22-08 - Conduction, Convection & Radiation
The document discusses the three main methods of heat transfer: conduction, convection, and radiation.
Conduction involves the transfer of heat energy between particles in direct contact through molecular collisions. Convection is the transfer of heat energy by the movement of fluids such as gases and liquids. Radiation involves the transfer of heat energy through electromagnetic waves and does not require matter to be moved.
Zinc and zinc alloy plating
An overview of zinc and zinc alloy plating technology, mainly for automotive industry. A comparison between their properties is made.
Sequence.pptx
The document provides information about arithmetic and geometric sequences. It defines arithmetic sequences as sequences where each term is obtained by adding a constant (the common difference) to the preceding term. Geometric sequences are defined as sequences where each term is obtained by multiplying the preceding term by a constant (the common ratio). Formulas are provided for finding specific terms, sums of terms, and other properties of arithmetic and geometric sequences. Examples of solving various arithmetic and geometric sequence problems are also presented.
Special right triangles.pptx
This document discusses different types of triangles, including acute, right, obtuse, scalene, and isosceles triangles. It specifically focuses on special right triangles, describing the 30-60-90 and 45-45-90 right triangles through examples and assigning groups to solve for unknown sides of these triangles. As homework, students are asked to practice solving 30-60-90 and 45-45-90 right triangles.
More Related Content
Viewers also liked
M.Tech. Programme in Sustainable
Job Thomas, Reader in Civil Engineering
School of Engineering
Cochin University of Science and Technology, Cochin -22, job_thomas@cusat.ac.in
Dean’s Honor List - Fall 2016
This letter from the Dean of the College of Engineering, Computer Science, and Construction Management at California State University, Chico congratulates Robert Nather for being named to the Dean's List for the Fall 2016 semester for achieving a GPA of 3.5 or better. The Dean expresses that achieving academic excellence is important to the university's mission and that Robert's strong performance is a mark of distinction for the faculty. Robert is also granted a Certificate of Achievement.
Construction Engineering Technology
Information on the Construction Engineering Technology program available at Carl Sandburg College in Galesburg, IL.
See Yourself at CSC
Journal of Construction Engineering Technology & Management vol 6 issue 3
Journal of Construction Engineering, Technology and Management (JoCETM) is a Journal focused towards the rapid publication of fundamental research papers on all areas of Construction Engineering, Technology and Construction Management.
Focus and Scope Covers
Planning and Management of the Construction of Structures
Design of Temporary Structures
Quality Assurance and Quality Control
Building and Site Layout Surveys
On Site Material Testing,
Safety Engineering, Materials Procurement, Budgeting & Cost Engineering
Concrete Mix Design
Technological and cross border mixture value chain of science and engineering...
Abstract This scientific paper presents in national premiere and in original multi-integrative and multi-potential concept of creation, experimentation, realization and integration on the route of the technological cross-border mixture value chain of intelligent mix-mechatronic-integronic-adaptronic products and systems / micro-nano-systems for the industry, economy and society, corresponding to the new intelligent labour jobs. Index Terms: mixture value chain; multi-integrative engineering; mix-mechatronic-integronic-adaptronic products and system
International journal of Construction Engineering and Planning vol 2 issue 1
International journal of Construction Engineering and Planning vol 2 issue 1JournalsPub www.journalspub.com
International journal of Construction Engineering and Planning
is primarily devoted to scientific articles and comprehensive reviews that are focused on the quality control, risk assessment, resource management in the field of construction engineering and planning. Journal also focuses on the production planning, critical path method that can create an impact on the ongoing research.Chapter 14 heat and heat transfer methods
1) The document discusses heat transfer and the Earth's interior. It explains that radioactivity in rocks provides the energy that keeps the Earth's interior molten, despite heat transfer to the surface and outer space.
2) It then lists the learning objectives for the chapter, which include defining heat, examining heat transfer methods, and discussing conduction, convection and radiation.
3) The introduction states that heat is a form of energy that is transferred by different methods and explains phenomena like the chill of a clear night. It notes heat transfer is fundamental and will be referred to in later chapters.
Methods of heat transfer and thermal properties of soil
1. Heat transfer in soils occurs through three modes: conduction, convection, and radiation. Conduction involves the transfer of heat between contacting surfaces of the same or different substances. Convection involves the transfer of heat by the actual movement of heated molecules within gases and liquids. Radiation involves the transfer of heat through empty space by electromagnetic waves.
2. Key thermal properties of soils include specific heat, thermal conductivity, and thermal diffusivity. Specific heat refers to the amount of heat required to change a substance's temperature. Thermal conductivity measures a material's ability to conduct heat. Thermal diffusivity indicates a material's ability to conduct thermal energy relative to its ability to store energy.
3.
Metals aug. 4
The document provides information about various metals used in construction, including their properties and common applications. Aluminum is discussed first, noting its light weight, corrosion resistance when anodized, and common uses in building elements like doors, windows and siding. Other metals covered include iron, steel, copper, brass and lead along with their characteristics and typical structural and architectural applications.
Energy Flow In Ecosystems
The document discusses energy flow through ecosystems and food webs. It provides several field notes describing relationships between different organisms, such as plants being eaten by herbivores or smaller organisms being eaten by larger predators. It then explains that as energy moves through food chains and webs, the vast majority (around 90%) is lost as heat, so there is only about 10% of the original energy available at each trophic level. This pattern can be represented through an energy pyramid diagram.
Thermoregulation
The document discusses how the hypothalamus regulates body temperature through increasing or decreasing mechanisms in response to heat or cold. In hot conditions, the hypothalamus triggers sweating and vasodilation to cool the body, while in cold conditions it causes piloerection, vasoconstriction, shivering and metabolic heat production to conserve heat. The hypothalamus integrates input from thermoreceptors in the skin and blood to maintain core temperature within a narrow range.
Cpgp day01-session 5 - drawing a process flow diagram 2012 final
A process flow diagram (PFD) visually depicts the steps in a process sequentially. It uses simple symbols like rectangles for process steps and arrows to show material and information flow. A PFD for a peanut processing operation is presented as an example. The key steps shown are storing raw peanuts, de-shelling, sorting, and frying. Inputs and outputs at each step are indicated with arrows, such as electricity and coconut oil used for frying. The PFD ends by showing the finished product of fried salted peanuts. Guidelines are provided for continuing a PFD across multiple pages and depicting auxiliary and repeated processes.
Reflection Of Sound Part 2
The document discusses several topics related to sound:
1. Reflection of sound follows the same laws as light reflection, with the incident, reflected, and normal waves lying in the same plane. Echoes are produced by sound reflections off large, hard, smooth surfaces.
2. Reverberation occurs when the original and reflected sounds are so close in time that they cannot be heard separately, making the sound seem prolonged.
3. Applications of echoes include locating submarines, fish shoals, and sunken objects underwater through echolocation.
Timber DEFECTS
Defects in timber lower its strength, durability, utility, and appearance. Defects are caused by natural forces, insects, conversion processes, seasoning, and fungi. Common defects include knots, shakes, twisted fibers, staining, and rot. Defects are classified based on their origin and impact wood properties and usability. Thorough inspection allows identification and appropriate use of timber despite defects.
Milk the complete food
- Milk comes primarily from cows but also from sheep and goats. Soy milk is used by vegetarians.
- Milk provides protein, fat, carbohydrates, vitamins, and minerals like calcium. It is especially important for growth, repair, and bone health.
- Milk undergoes processes like homogenization, pasteurization, and ultra-heat treatment to kill bacteria and extend shelf life. It is stored refrigerated in clean containers.
11 conversion of timber
This document discusses different methods for converting logs into timber. It describes felling timber and transporting logs. It then explains four methods for converting logs: horizontal bandsaw, through and through sawing, quarter sawing, and tangential sawing. For each method, it provides the advantages and disadvantages. An exam question is included that asks the reader to name the conversion methods shown in diagrams, state the advantages and disadvantages of each, and determine which board shown is most likely to cup and why.
Methods of heat transfer
The document discusses three main methods of heat transfer: conduction, where heat travels through solid materials; convection, where heat travels with moving air or liquids and sets up currents; and radiation, where heat travels in rays like from the sun and occurs during grilling without the food touching the heat source. It also covers different cooking methods like roasting, frying, boiling, and baking, as well as microwave cooking which uses electromagnetic waves to cause particles to vibrate and build heat inside food.
cathodic protection
The document discusses cathodic protection methods for corrosion control. It describes two main types of cathodic protection - sacrificial anode and impressed current. Sacrificial anode uses more reactive metals like zinc or aluminum as anodes, while impressed current uses an external DC power source and insoluble anodes like graphite. Common applications include protecting pipelines, ships, and marine structures. Issues that can arise include hydrogen embrittlement, cathodic disbonding, and safety concerns with rectifiers.
02-22-08 - Conduction, Convection & Radiation
The document discusses the three main methods of heat transfer: conduction, convection, and radiation.
Conduction involves the transfer of heat energy between particles in direct contact through molecular collisions. Convection is the transfer of heat energy by the movement of fluids such as gases and liquids. Radiation involves the transfer of heat energy through electromagnetic waves and does not require matter to be moved.
Zinc and zinc alloy plating
An overview of zinc and zinc alloy plating technology, mainly for automotive industry. A comparison between their properties is made.
Viewers also liked (20)
Journal of Construction Engineering Technology & Management vol 6 issue 3
Journal of Construction Engineering Technology & Management vol 6 issue 3
Technological and cross border mixture value chain of science and engineering...
Technological and cross border mixture value chain of science and engineering...
International journal of Construction Engineering and Planning vol 2 issue 1
International journal of Construction Engineering and Planning vol 2 issue 1
Methods of heat transfer and thermal properties of soil
Methods of heat transfer and thermal properties of soil
Cpgp day01-session 5 - drawing a process flow diagram 2012 final
Cpgp day01-session 5 - drawing a process flow diagram 2012 final
More from Ces Joanne Fajarito
Sequence.pptx
The document provides information about arithmetic and geometric sequences. It defines arithmetic sequences as sequences where each term is obtained by adding a constant (the common difference) to the preceding term. Geometric sequences are defined as sequences where each term is obtained by multiplying the preceding term by a constant (the common ratio). Formulas are provided for finding specific terms, sums of terms, and other properties of arithmetic and geometric sequences. Examples of solving various arithmetic and geometric sequence problems are also presented.
Special right triangles.pptx
This document discusses different types of triangles, including acute, right, obtuse, scalene, and isosceles triangles. It specifically focuses on special right triangles, describing the 30-60-90 and 45-45-90 right triangles through examples and assigning groups to solve for unknown sides of these triangles. As homework, students are asked to practice solving 30-60-90 and 45-45-90 right triangles.
QUADRILATERALS.pptx
This document defines and describes types of quadrilaterals including parallelograms, trapezoids, kites, rectangles, rhombuses, and squares. It provides properties and theorems for each shape and examples to solve problems involving midlines, midsegments, isosceles trapezoids, and kites. Seatwork and homework problems are also presented.
Variations.pptx
This document discusses direct variations and provides examples. It begins by defining a direct variation as a relationship where one variable increases as the other increases, and their ratio remains constant. It then provides a table showing a direct relationship between the number of kilos of paper and its cost. The document explains that for a direct variation, the equation is Y=kX, where k is the constant ratio of y/x. It provides examples of situations that do or do not show direct variation and includes a sample problem solving for a direct variation equation.
Probability of an Event.pptx
This document discusses probability and different types of events. It defines key terms like experiment, outcome, and sample space. It explains that simple events consist of one outcome while compound events have more than one outcome. It provides examples of calculating probabilities of simple, compound, mutually exclusive and not mutually exclusive events using diagrams, dice rolls, cards, and student activities data. Sample problems are worked through and explained.
POLYNOMIAL FUNCTIONS.pptx
This document discusses polynomial functions. It defines a polynomial function as a function of the form y= anxn+an-1xn-1+...+a1x+a0, where n is a nonnegative integer and an≠0. It provides examples of polynomial functions in standard form and factored form. It also notes that the values of x in a polynomial function are called x-intercepts, as they are the values where y=0. The document provides examples of factoring polynomial expressions and finding the y-intercept. It asks questions about the differences between polynomial equations and functions.
Division of Radicals.pptx
This document discusses dividing radicals and rationalizing radicals. It provides examples of rationalizing radicals by applying the law of radicals to make the denominator free of radicals. Examples of dividing radicals with the same index are also shown. The steps for dividing radicals are to divide the radicands and rationalize if needed to remove radicals from the denominator. An activity is included where students work in groups to solve radical expressions and present their work.
Introduction to Quadratic Functions.pptx
This document provides an introduction to quadratic functions including:
- Quadratic functions can be described by equations of the form y = ax^2 + bx + c, where a, b, and c are real numbers and a ≠ 0.
- The graph of a quadratic function is a parabola (smooth curve).
- Tables of values for quadratic functions have a constant second difference in y.
- Examples of quadratic and non-quadratic functions are provided along with practice problems identifying quadratic functions from equations and tables of values.
Electronic Spreadshet
This document provides information about electronic spreadsheets and Microsoft Excel. It defines key spreadsheet terminology like worksheets, cells, ranges, and formulas. It explains common spreadsheet features and functions like merging cells, formatting rows and columns, and freezing panes. The document also provides step-by-step instructions for basic Excel tasks like creating tables, adjusting cell sizes, and unfreezing panes.
Managing Application Systems
This document discusses computer applications and their importance. It defines an application as a set of instructions and programs that improve a computer's functionality. The document outlines different types of applications including desktop applications like word processors and web browsers, as well as mobile apps. It explains that applications allow computers to perform specific tasks and that without applications, computers would not be functional.
Misinformation on Computer
This document discusses misinformation on the internet. It provides examples of how misinformation spreads, such as through false news reports and social media. While internet users have learned to be skeptical of online information, misinformation remains a problem. False information spreads similarly to accurate information, aided by "gatekeepers" with large social networks. Internet memes also allow information to take on new, sometimes false meanings as it is spread and transformed online. Verifying information online remains important to counter the spread of misinformation.
Group and Work Group Behavior
A group is defined as two or more individuals who interact with one another and work together regularly to achieve common goals. Groups have various types of resources like staff, funds, facilities, equipment, supplies, and time. Groups can be formal, arising from an organizational structure and purpose, or informal, emerging without official designation. Examples of formal groups are operations, finance, human resources, and marketing teams. Informal groups include command groups composed of those reporting to a manager, task groups working on jobs, interest groups pursuing objectives, and friendship groups with common characteristics. Both formal and informal groups impact employee performance and satisfaction in an organization.
Report on computer
This document provides information on basic spreadsheet functions such as SUM, AVERAGE, and PERCENTAGE. It explains the parts of a function including the equal sign, function name, and argument. It describes how to use the SUM, AVERAGE, and PERCENTAGE functions in formulas and examples of calculating percentages for discounts, increases, and percentage changes. It includes an activity involving calculating total sales, percentage changes in sales, and average sales per day using given data on fruit quantities sold each day and fruit prices.
Aims for mathematics geared towards excellence
This document discusses traditional versus modern approaches to mathematics curriculum, instruction, and assessment in Asian countries.
It outlines the traditional approaches, which focus on individual subjects taught from textbooks, teacher-centered instruction, and paper-based assessments. In comparison, modern approaches emphasize integrated subjects, student-centered active learning, and performance-based assessments.
The document also examines factors that influence student excellence in math, including curriculum, teacher preparation, parental support, and using multiple instructional methods to engage different learning styles. It provides examples of teaching addition of integers and direct variation to illustrate modern instructional approaches.
Thermal expansion
Most matter expands when heated and contracts when cooled. The volume of a material generally increases as its temperature increases, with the fractional change in length or volume defined as the coefficient of linear expansion. Charles' Law states that for a given temperature change, all gases expand by the same amount of volume, while Boyle's Law says the volume of a gas varies inversely with pressure if temperature is held constant. The General Gas Law combines these, relating the pressure, volume, and temperature of a gas.
Heat
The document discusses the definitions and differences between temperature and heat. Temperature is a measure of how hot an object is using degrees Celsius, while heat is a form of energy transferred between objects due to a difference in temperature. Specific heat refers to the amount of heat needed to change an object's temperature by 1 degree per unit of mass, while heat capacity is the total amount of heat needed to change an object's temperature regardless of mass. Heat and temperature are related because gaining or losing heat causes an object's temperature to increase or decrease.
Work, energy and power
This document defines and provides formulas for work, energy, power, and the law of conservation of energy. It explains that work is the product of force and displacement and its unit is joules. There are two types of energy: kinetic energy, which is the energy of motion, and potential energy, which is energy at rest in gravitational, chemical, or elastic forms. The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another. Power is defined as the rate of doing work or speed of work and its unit is watts. Sample problems are provided to demonstrate calculating kinetic energy, gravitational potential energy, work, and power.
Centripetal acceleration and force
The document summarizes experiments on centripetal force using a rotating platform. It discusses the centripetal force needed to maintain circular motion and provides formulas for calculating centripetal acceleration and force. Examples are given about centripetal force in a rotating train and questions are provided about centripetal force exerted on a hanging penny and problems calculating force for given mass, speed, and radius.
Uniform circular motion
This document defines terms related to circular motion such as axis, rotation, revolution, period, frequency, speed, and tangential speed. It explains that uniform circular motion occurs when an object moves at a constant speed in a circular path. Examples are provided to demonstrate how to calculate rotational speed, frequency, and tangential speed using the formulas provided for different circular motion scenarios.
Application of friction
This document discusses the laws of friction and provides examples of how to calculate coefficients of friction and frictional forces. It defines key terms like coefficient of friction, normal force, static friction, and kinetic friction. Formulas are provided to calculate the coefficient of friction and frictional force. Two sample problems demonstrate how to apply the formulas to find the coefficient of friction or frictional force given values for normal force, applied force, mass, and angle of inclination. Finally, two practice exercises are presented.
More from Ces Joanne Fajarito (20)
Recently uploaded
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaThe Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcLAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Recently uploaded (20)
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Methods of heat transfer
- 2. TRANSMISSION OF HEAT •MOVEMENT OF HEAT FROM COLDER TO HOTTER ITEM
- 3. CONDUCTION •OCCURS WHEN TWO OBJECTS TOUCH •CONDUCTORS- MATERIALS THAT ARE READY TO CONDUCT HEAT •INSULATORS- MATERIALS THAT SLOW DOWN CONDUCTION OF HEAT
- 4. CONVECTION •OCCURS IN ALL UNEVENLY HEATED LIQUIDS AND GASSES •OCCURS WHEN HEATED SUBSTANCE ITSELF MOVES
- 5. RADIATION •ONLY TYPE OF HEAT TRANSFER THAT CAN OCCUR IN EMPTY SPACE
- 6. QUIZ #6 WRITE WHAT METHOD OF HEAT TRANSFER IS PRESENT IN EACH SITUATION.
- 7. 1.A POT SITTING ON A HOT BURNER. 2.HOW THE INSIDE OF A GREENHOUSE WORKS 3.A PERSON PLACING HIS HANDS OVER A WARM FIRE 4.PUTTING YOUR WET SHOES ON A DOOR VENT TO LET IT DRY FASTER 5.PICKING UP A HOT CUP OF COFFEE