SlideShare a Scribd company logo
Light
•Wave Vs. Particles                  •Light Transmission
•Electromagnetic Waves               •Thin Films & Thin Films
                                        Interference
•Frequency and Wavelength
•Michelson-Morely Experiment         •Luminosity
•Light Vs. Sound                     •Polarized Light
•Space Travel & The Speed of         •Planck’s Constant
  Light                              •Coherent Light
•Why Objects Have Color              •Lasers
•Primary and Secondary Colors        •Holograms
•Light Colors Vs. Pigments           •Luminous Flux
•The Electromagnetic Spectrum        •Illuminance
•Parallax and Depth Perception       •Luminous Intensity
                                     •Luminous Flux vs. Power
                                     •Luminous vs. Illuminated
Light: Introduction
For centuries the nature of light was disputed. In the 17th
century, Isaac Newton proposed the “corpuscular theory”
stating that light is composed of particles. Other scientists,
like Robert Hooke and Christian Huygens, believed light to
be a wave. Today we know that light behaves as both a
wave and as a particle. Light undergoes interference and
diffraction, as all waves do, but whenever light is emitted, it
is always done so in discreet of packets called photons.
These photons carry momentum, but not mass.




    Robert Hooke         Christian Huygens      Isaac Newton
Wave Vs. Particles
Light is an electromagnetic wave. As light travels through space
an electric field and a magnetic field oscillate perpendicular to
the wave direction and perpendicular to each other. We’ll learn
more about these fields in later units. A light wave is transverse
rather than longitudinal, since each field oscillates in a plane
perpendicular to the direction of the wave. Unlike a pulse
traveling down a length of rope, nothing is physically moving in a
light wave. Light requires no medium! It can travel through
space that contains matter (such as air, glass, or water) or
through a vacuum.

                          If light did need a medium in order to
                          propagate, the earth would spend its
                          days submerged in darkness and the
                          sun would not be visible.
Electromagnetic Waves
Electric and magnetic fields affect charges. Light is an
electric field coupled with a magnetic field. The two fields
oscillate together but in different planes. To visualize an
electromagnetic wave, you must think in 3-D. Let’s put a
light wave together one piece at a time.




  Above is a set of 3-D coordinate axes. The z -axis is
  vertical, the y-axis is horizontal, and the x -axis is
  coming out toward you.
Electromagnetic Waves (cont.)

The red wave represents an oscillating electric field in the
y-z plane. (Every point on this curve has an x coordinate
of zero.) It is a snapshot in time. At the crests and
troughs, the electric field will exert the greatest force on a
charge, but in opposite directions. Charges located at the
y -intercepts will experience no electric force (at this point
in time).
Electromagnetic Waves (cont.)
In the top right picture, the blue wave represents an oscillating magnetic field
in the x-y plane. (Every point on this curve has an z coordinate of zero.) It is
a snapshot in time. Like the electric field, the magnetic field is strongest at
the crests and troughs.
Bottom right is shown an electric
and a magnetic field oscillating
together. This is an electro-
magnetic wave (light). The fields
travel through space together.
They have the same period and
wavelength, but they oscillate in two
different planes, which are
perpendicular to each other. The
electric field, the magnetic field, and
the wave direction are all mutually
perpendicular. For some additional           Wave Pic     Light animation
pictures, check out these links
below. Remember, what you’re                    Propagation in matter
seeing is just a snapshot in time
(see animation).                             Oscillating charge animation
Frequency and Wavelength
The frequency of a light wave corresponds to the color we see. The
amplitude corresponds to brightness.
                              Light             Sound
             Frequency        Color             Pitch
             Amplitude        Brightness        Loudness

The frequency of visible light is extremely high compared to that of
audible sound. Red light, for example, is the lowest frequency of
visible light, but even red light has a frequency of over 400 trillion
Hertz. This means if you’re looking at a red light, over 400 trillion full
cycles of red light enter your eye every second! The frequency of
violet light is even higher—over 750 trillion Hz. Other types of
electromagnetic radiation, like X-rays, have even higher frequencies,
and some have lower frequencies, like radio waves. Just as our
ears are only capable of hearing certain range of sounds (20 –
20,000 Hz), our eyes can only see a small range of frequencies.
Frequency and Wavelength (cont.)
Because visible light waves have such high frequencies, their wave-
lengths are very short. Recall the formula v = λf (wave speed =
wavelength × frequency). Since light of any frequency always
travels at the same speed in a vacuum, v is a constant. Thus, the
bigger f is, the smaller λ must be. Red light, for example, has a
wavelength of only about 700 nm. (1 nm = 1 nanometer = 10-9 m = 1
billionth of a meter.) Violet light has an even smaller wavelength,
since its frequency is higher. X-rays have still smaller wavelengths.
Radio waves can have very long wavelengths (many meters) since
their frequencies are so low.




                High Frequency ↔ Small Wavelength
                Low Frequency ↔ Long Wavelength
                      Vacuum speed is constant.
Historical Background
• Before Galileo’s time (around 1600), many people believe that
light was infinitely fast. It’s so fast that it seemed like it took no
time to get from one place to another. Galileo and an assistant
went to the Italian countryside, a mile apart, and tried to measure
the speed of light by timing it. All they could determine was that
light is much faster than sound.
• Later that century (around 1667) a Danish astronomer named
Ole Roemer made the first accurate measurement of the speed of
light. He had been observing one of Jupiter’s moons, Io (which
Galileo had discovered). As Io circled Jupiter, it would be eclipsed
by Jupiter periodically. That is, Jupiter would block Io’s view from
Earth at regular intervals. Each time Io orbited Jupiter, an eclipse
would occur. The time between the eclipses was the period of Io’s
orbit. Roemer noticed that the eclipses sometimes took a little
longer, and sometimes they took a little less time. Io’s period
seemed to fluctuate: first Io would be behind schedule; then it
would be ahead of schedule. This pattern repeated itself every
year, which hinted to Roemer that the fluctuation had to do with
Earth’s motion around the sun.
Historical Background (cont.)




Because Jupiter is farther from the sun, it moves much slower
around the sun (recall Kepler’s third law). During the six-month
period depicted above, Earth is moving away from Jupiter.
Therefore, the light carrying the information of the eclipse took a little
longer to reach Earth, since Earth was “running away” from that
light. At the end of the six months, the light from Io had to travel an
extra distance about equal to the diameter of Earth’s orbit.
Roemer’s observed that Io eclipses were about 8 minutes behind
schedule after six months. Knowing approximately Earth’s orbital
diameter, Roemer calculated the speed of light at around 125,000
miles per second! Roemer’s speed, as great as it was, was actually
an underestimate. The true speed of light is just a half a smidgeon
under 3 · 108 m/s, which is about 186,300 miles per second! We call
this speed c. c = 2.9979 × 108 m/s ≈ 3 × 108 m/s
Historical Background (cont.)
• Roemer’s main contribution was proving that the speed of light is finite.
Since Roemer, several people contributed to determining the precise
value for c. In 1849 Louis Fizeau found an excellent approximation for c
without resorting to astronomical means. He used a rapidly rotating,
toothed wheel. He shined a beam of light through one opening between
the teeth, which reflected off a mirror over 5 miles away. When the wheel
spun fairly slowly, the light could easily pass through the opening, reflect,
and pass through it again in the other direction before its path was
blocked by the next tooth of the wheel. By making the wheel spin faster
and faster until the reflected beam of light was blocked, Fizeau was able
to calculate c.
• Jean-Bernard Foucault also made accurate measurements of c. He
shined light at a rotating mirror, which reflected to a stationary mirror,
back to the rotating mirror, and finally back toward the source. Because
the rotating mirror turned slightly while the light was traveling to the
stationary mirror and back, the rotating mirror reflected the light at a slight
angle. This angle allowed him to calculate c.
Michelson-Morely Experiment
Albert Michelson is best known for an experiment he did with Edward Morely
in 1887. At the time it wasn’t understood that light needed no medium through
which to travel. It was proposed that light traveled through an invisible “ether”
in space. The Michelson-Morely experiment was an attempt to detect Earth’s
motion through the ether. Here’s how it worked: First imagine you’re standing
still outside and there is a wind coming from the north. If you run north, you’ll
measure a greater wind speed. If you run south, you’ll measure it slower.
Whether you run north or south, though, you’ll still feel the wind coming from
the north. If you run east or west, however, not only will the wind seem to
change speed, so will its direction.
Now imagine a race between two equally fast swimmers. They each go the
same distance in a river, but one goes upstream and back while the other
goes directly across the river and back. With no current the race would
definitely be a tie, since their speeds and distances are the same. With a
current, however, the cross-stream swimmer will win. This is not obvious.
You should try to prove this. For a hint see the “
river crossing--relative velocities” slide from the presentation on vectors. It
involves the same principle as Michelson’s interferometer (but without
lasers).
                                                 Michelson-Morely
Michelson-Morely Experiment (cont.)
Michelson built something called an interferometer        Michelson
to try to measure a change in the speed of light in
two different directions. The Earth moving through
the ether around the sun is analogous to a wind or
current. Instead of racing two swimmers, Michelson
raced beams of light. Light was shone onto a mirror
that allowed half of it to pass through. Each beam
traveled the same distance before being reflected
back and allowed to recombine. Based on the
interference pattern of the combined waves,
Michelson should have been able to detect a
winner. But no matter how the experiment was
done, the race was always a tie. This eventually
forced physicist to abandon the ether theory.
Einstein resolved the problem in 1905 with his
theory of special relativity. In it he asserts that the
speed of light is the same no matter how fast or           Einstein
which way an observer is moving.
Light Vs. Sound
It is important to emphasize just how fast light is. Compared to light, sound is
a snail. A wise person once said, “Light travels faster than sound, which is
why some people appear bright until you hear them speak.” Have you ever
watched a baseball game from a distance? You see the batter make contact
with the ball, but the sound of the wallop is delayed. This is because,
although sound is really fast, light is super-duper fast. For all practical
purposes, when you see something is when it happened (at least for events
here on Earth). You can determine how far away a lightning strike is by
counting seconds from the time you see the lightning until you hear the
thunder. It takes sound about 5 s to travel a mile, so if the thunder lags
behind the lightning by 2 or 3 s, then the lightning strike occurred about half
a mile away.

Problem: You hear a thunder clap 6 s after
you see the lightning. Assume the speed of
sound to be 343 m/s. How far away is the
lightning?

              (Solution on next slide)
Light Vs. Sound (cont.)
Answer: Ignoring the small amount of time light needs to travel to you,
we have:
               d = v t = (343 m/s) (6 s) = 2058 m

Problem: Now let’s do the same problem without ignoring light’s travel
time:




                        Light Waves                  Sound
                                                     Waves
                                                 Solution on next slide 
Light Vs. Sound      (cont.)

Answer: Let t = time it takes the light to reach you. In that
time the sound of the thunder only travels a short distance.
Since you hear the thunder 6 s after you see the lightning,
the sound travels for (6 s) + t. The light and sound each
travel the same distance, so:

                    343 (t + 6) = (3 · 108) t
              ⇒     t = 6.8600078 · 10-6 s
              ⇒     d = 2058.0024 m

So, the lightning strike really occurred a couple millimeters
farther away than we had calculated the first way. Note: The
difference in results is meaningless here since we can’t know
the time delay or the speed of sound to as many significant
digits as our answer has.
Space Travel & The Speed of Light
We can’t always ignore the time light takes to travel. Whenever you
look into the night sky, for example, you’re really looking back into
time. The stars you see are so far away that the light they emit takes
years to reach us. Nearby stars are tens or hundreds light-years away.
 A light-year is the distance light travels in one year, almost 6 trillion
miles. (Our sun is only about 8 light-minutes away).
Problem: Schmedrick is on a space journey heading toward Alpha
Centauri, the nearest star excluding the sun, which is about 4.3 light-
years away. Schmedrick's rocket goes a constant 0.03 c (3% of the
speed of light). As he passes Alpha Centauri he sends a radio
message back to Earth and continues traveling away from Earth. The
Earthlings reply immediately. How long must Schmedrick wait for his
reply?




                                                        Solution on next slide 
Space Travel & The Speed of Light          (cont.)

Answer: Since we know a trip back and forth from Alpha
Centauri takes a total of 8.6 years, we can set up our
equation in the following way:
d = vt (c = 1 in light years per year)

         8.6 + v t = c t
       ⇒ 8.6 + 0.03 c t = c t
       ⇒ 8.6 + 0.03 t = t                       A. C.
       ⇒ 8.6 = 0.97 t                                         S.
       ⇒ 8.6 / 0.97 = 8.87
                                                        vt
                                       4.3 ly
Schmedrick will have to wait 8.87 years to get a reply back
from earth.
Links: Find out more about Alpha Centauri here.
Why Objects Have Color
Visible light is a combination of many wavelengths (colors), which
give it a white appearance. When light hits an object certain
wavelengths are reflected and others are absorbed. The reflected
wavelengths are the ones we see and determine the color of an
object.




In the first picture the tomato absorbs blue and green wavelengths
and reflects the red wavelength. In the second picture red light is
shone upon the tomato. The tomato is still reflecting the red
wavelength and thus still looks red. But in the 3rd picture blue light is
shone upon the tomato, and since the tomato absorbs the blue
wavelength the tomato appears to be black.
     Links: Prism (light broken down in different wavelengths.
Primary and Secondary Colors




The primary light colors are Red, Blue, and Green (RGB).
The secondary light colors are Yellow, Cyan, and Magenta.
Combining pigments in painting is exactly the opposite:
The primary pigments are Yellow, Cyan, Magenta.
The secondary pigments are Red, Blue and Green.       Animation
Light Colors Vs. Pigments
Primary colors in light are red, green, and blue because when put together
in the right intensities they form white light. Televisions use this idea to
project pictures on the screen. When lights these colors are combined in
pairs they form the secondary colors for light.

Pigment colors are seen by reflected light. A primary pigment color is one
that absorbs only one primary light color and reflects the other two primary
colors. Thus yellow, magenta, and cyan are the primary colors for pigments.
Yellow reflects red & green, cyan reflects green & blue, and magenta
reflects red & blue. Secondary pigments colors then are blue, green, and
red because they absorb two primary light colors and reflect their own light
color back.
The Electromagnetic Spectrum




The electromagnetic spectrum covers a wide range of wavelengths and
photon energies. Visible light ranges from 400 to 700 nanometers.
About 550 nanometers, which is a yellowish green, is the wavelength to
which our eyes are most responsive. Only a small portion of the
electromagnetic spectrum is visible to us. The smaller the wavelength,
the more energy each photons of the light has.
Electromagnetic Spectrum (cont.)
Wavelengths other that visible light serve useful purposes:
Radio waves are very long (a few centimeters to 6 football fields) and can
be used to send signals. These signals are transmitted by radio stations.
They transmit information and music via amplitude modulation (AM) and
frequency modulation (FM).
Microwaves (a few millimeters long) are also used in communications.
Microwave ovens are great for heating food since food is primarily water,
and microwaves have just the right frequency to get water molecules
vibrating.
Infrared (micrometers in length) are used in remote controls to change the
channel, and they are also radiated by objects that are warmer than their
surrounding (like your body). They make night vision equipment possible.

Ultraviolet light is harmful to our bodies because its wavelength is so
small. Short wavelength mean high energy for photons. UV causes our
skin to tan and burn. Fortunately, the ozone layer blocks most UV
radiation, but prolonged exposure to the sun should be avoided, since UV
rays can cause skin cancer. On the positive side UV radiation helps
people to produce their own vitamin D.
Electromagnetic Spectrum               (cont.)
 X-rays are even more energetic, and hence more dangerous, than UV
 rays, but luckily they cannot penetrate our ozone layer. They are
 produced in space and of course are used by doctors to get pictures of
 your bones.
 Gamma rays are the most energetic of the light waves and little is known
 about them other than they are very harmful to living cells and are used
 by doctors to kill certain cells and for other operations. They are
 produced in nuclear explosions. Like other high energy rays, our
 atmosphere protects us from gamma rays.
 Astronomers have many different types of telescopes at their disposal to
 observe the universe in all parts of electromagnetic spectrum. Some
 telescopes are
 ground-based; others
 are space-based:

Arecibo   Spitzer
Hubble    Keck
Compton
Parallax and Depth Perception
Parallax is any alteration in the apparent position of an object due to
a change in the position of the observer. A simple demonstration of
this effect can be seen by extending your thumb at arm’s length.
Then close one eye at a time and note how your thumb appears to
jump left and right relative to the background. Now move your
thumb closer and note how the jump is greater. This technique can
be used in astronomy to find a star’s distance from Earth. For
distant objects like stars, astronomers must move their “eyes” as far
apart as possible. They accomplish this by observing the apparent
displacement of a star against the background of more distant stars
resulting from the change of the Earth’s position in orbit. The
parallax angle is exaggerated in the picture below.



                                 θ         θ
                   ≅θ
Parallax and Depth Perception             (cont.)

The picture is not to scale. The diameter of Earth’s orbit is very small
compared to the distance of the star being measured, which in turn
is very small compared to the distance of the background stars. For
this reason the angular displacement of points A and B, as seen
from Earth at any point in its orbit, is almost exactly the same as the
parallax angle.
Problem: Back on Earth Schmedrick attempts to figure out how far
away a certain distant star is. He figures out a 2 degree parallax
angle from two different observations made during the earth’s
period. How far away is the star? (Earth 93 million miles from the
sun.) Solution on next slide.
                                                                       A



                                  2o


                                                                       B
Parallax and Depth Perception           (cont.)

Answer: Let R be the Earth-sun distance and x the distance to the
star in question. Thus,

  tan (θ / 2) = R / x. With θ = 2° and R = 93 million miles,

               x ≈ 5.33 × 109 miles

The Star Schmedrick is looking at is approximately 5 billion miles
away. So, Schmed must have been imagining this star, because
it’s much too close for any real life star (other than the sun).


   R
                              2o
                   x
Luminous vs. Illuminated
A luminous object is a body that produces its own light such as
the sun or a light bulb.
An illuminated object is a body that reflects light, just like the
moon, people, and buildings.
Some objects, like water and glass, transmit light to some
extent. In order to be seen, light must come from an object one
way or the other.
Luminosity & Magnitude
Luminosity is the rate at which energy of all types, and in all
directions, is radiated by an object. The luminosity of a star depends
on its size and its temperature: L ∝ R 2 T 4. The sun is a medium-
sized star with a luminosity of 3.8×1026 J/s. The known luminosities of
stable stars range from about a millionth that of the sun for a
relatively cool white dwarf to about a million times that of the sun for
the hottest known super-giant star. Astronomers assign stars
magnitudes based on how bright they are. Apparent magnitude
 measures how bright a star appears to be from Earth. Absolute
magnitude measures its true luminosity.
The brighter the star, the lower its
luminosity. Every 5 magnitudes
corresponds to brightness changing
by a factor of 100. For example, a
magnitude 1 star is 10,000 times
brighter than a magnitude 11 star.
Besides the sun, the brightest star as
seen from Earth is Sirius with an
apparent magnitude of -1.6.
Light Transmission

Transparent: Materials, such as window glass,
through which light can travel easily and through
which other objects can clearly be seen.

Translucent: Materials, such as glass blocks,
through which light can pass through but no clear
image can be seen.

Opaque: Materials which absorb and reflect light.
Objects cannot be seen through the material. Most
objects are opaque.
Thin Films & Thin Film Interference
 The thin film effect refers to colors seen in
 such things as soap bubbles and oil spills. It
 occurs as a result of the constructive and
 destructive interference of light waves, not
 because of refraction as in a prism. When
 light hits a bubble, some of it is reflected by
 the outer (air-soap) interface (ray #1), while
 some penetrates the bubble wall and is
 reflected by the inner (soap-air) interface (ray
 #2). The two reflected rays interfere with one
 another. Typically, most wavelengths will be
                                                  Guinness Soap Bubble Records
 out of phase since #2 has to travel a greater
                           distance than #1. However, one wavelength will be in
 incident ray              phase and this corresponds to the color produced.
                           The color depends on how great the difference in
#1                         distance is that the two rays travel, and this distance
  #2                       depends on bubble thickness. The variations in
 reflected                 thickness (thinner at the top, thicker at the bottom)
 rays                      are responsible for the different colors.
         Soap Bubble Wall                                  Continued on Next
Thin Films       (cont.)
When light moving through the air encounters the denser film the
reflected ray is inverted, just like a pulse traveling down a slinky is
inverted when it reflects at the connection point with a heavier spring. The
transmitted ray is not inverted, which is also the situation with slinky and
spring. When the transmitted ray encounters the soap-air interface at the
inside of the bubble, again some of it is reflected back. This time,
however, the wave is not inverted (just as a pulse traveling on a heavy
spring is not inverted when it reflects at the connection point with a
slinky). The two reflected rays may or may not be in phase; it depends on
how thick the film is.
Since white light is comprised of many wavelengths, those that are nearly
in phase after reflecting off the bubble surfaces will be reinforced
(constructive interference). This is the color that will appear on the bubble.
The other wavelengths are out of phase (destructive interference) and
are, at least partially, cancelled out.

Since gravity causes the bubble to be thicker near the bottom, different
wavelengths are reinforced at different heights, producing bands of
colors. Interestingly, a bubble on the space shuttle will not produce bands
of different colors. This is because the shuttle is in free fall around Earth,
which means bubbles behavior as if they’re in a gravity-free environment.
Thus, bubbles are of uniform thickness.                 Continued on Next
Thin Films         (cont.)
 So how do we determine which color will be produced at a particular
 point on a bubble or other thin film? Well, if the thickness of the film
 is λ/4, then light of wavelength λ will be reinforced. Here’s why: The
 then the round trip in the film will be λ/2. This means the two waves
 will be in phase, since one was inverted and one wasn’t.
                                               Bubble Wall
                                                  λ /4
 Original Wave
                                                               Transmitted
                                                               wave
                                                               superimposed
                                                               with upright
                                                               wave from 2nd
Inverted wave                                                  reflection
from 1st reflection
superimposed
with upright wave
from 2nd reflection
                        air outside bubble                   air inside bubble
Polarized Light
                                             Be
                                                am
Light coming directly from the sun or              o’ L            Electric Field
                                                       igh
other sources is unpolarized, meaning                      t       Orientations
the electric and magnetic fields oscillate
in many different planes. Polarized light refers to
light in which all waves have electric fields oscillating in the same plane.
Imagine trying to pass a large piece of sheet metal through the bars of a
jail cell. To do this you would have to orient the sheet vertically (or nearly
so), otherwise the bars would block the sheet. Here, the bars are
analogous to a polarizing filter, and the sheet is analogous to the plane
in which the electric field is oscillating.
A polarizing filter is made of a material with long molecules that allow
electromagnetic waves of one orientation through. If a wave has an electric
field with any other orientation, the filter will only allow a component to pass
through, absorbing the rest. Note that only transverse waves such as light
can be polarized. Much of the light we see is at least partially polarized. For
example, when light reflects off of surfaces it is partially polarized. Some
sunglasses contain polarizing filters which helps to block glare (such as the
glare that is noticeable when looking out over a lake on a sunny day).

                Polarized Light      Glare                           Continued 
Polarized Light        (cont.)
Unpolarized light propagates in all orientations. No particular orientation is
preferred. When it passes through a filter that only allows vertical
components of electric fields to pass, its intensity is cut in half. This is
because, on average, the light is “half horizontal and half vertical” in terms
of electric field components. All horizontal components are blocked, making
the resulting polarized light half as bright.
Now, imagine that you place another filter that is perpendicular to the
direction of the first one, i.e., a filter that only allows the horizontal
components of electric fields to pass through. This would completely block
the remaining light. Thus, any two perpendicular filters will block all
incoming light.
Suppose now that the two filters are offset by some angle θ. Regardless of
the angle, the first filter blocks half the light. If θ = 0, the second filter has no
effect. If θ = 90°, the second filter blocks the other half of the light. In gen-
eral, when polarized light with an electric field of amplitude E passes
through the second filter, the amplitude will drop to E cosθ. Furthermore,
since the energy a wave carries is proportional to the square of its ampli-
tude, the intensity of the light will be the original intensity multiplied by cos 2θ.

                      Blocking Light                        Continued on Next
“Twisting” of Light
  We know that if θ = 90° between two filters, then no light will
  make it past the second one. At other angles light will pass
  through both, changing the orientation of its electric field each
  time. So, what if we arranged several polarizing filters so that the
  angle between any two consecutive filters is less than 90°? The
  answer is that light twists its way through the filters, even if the
  angles between the filters adds up to 90°. With each pass the
  light is oriented in a new direction, and this new orientation has a
  component parallel to the orientation of the next filter.

                                                                 Light
                                                                 Enters
Light
Exits



                                                        Twisting Light
Quantum Mechanic--Background
Recall that a black body is an ideal absorber of all incident radiation. A hot
black body is also a perfect emitter--radiation is the result of its temperature,
and since none of this is absorbed, it is a perfect emitter of radiation. A black
body emits all wavelengths of light but not equally; there is always a
wavelength in which the radiation peaks. The hotter the black body, the
                                          smaller the peak wavelength. Objects
                                          around you are cool, so their peak is in
                                          the infrared. The sun is hot enough to
                                          peak in the visible spectrum (all other
                                          wavelengths are emitted too but at
                                          lower intensities).

                                         In the late 19th century classical physics
                                         had predicted something impossible: as
                                         the temperature rises, the intensity of
                                         the peak radiation approaches infinity
                                         (red dashed line). The theory did match
                                         experimental data for large wavelengths
                                         but failed for small ones. This was
                                         known as the “ultraviolet catastrophe.”
Planck’s Constant
                   In 1900 Max Planck came up with a revolutionary way to
                   resolve the problem by assuming that energy came in
                   discrete amounts (quanta). This was the beginning of
                   quantum mechanics. Each quantum of light is called a
                   photon, and its energy is given by E = h f, where f is the
                   frequency of the radiation and h is the constant of
                   proportionality called Plank’s constant. The formula states
                   that higher frequency light has proportionally more energy
                   per photon. Einstein lent credence to Plank’s ideas by
                   explaining the photoelectric effect in a similar manner.
                   Robert Millikan did a series of experiments involving the
Max Plank          photoelectric effect and calculated the constant:
                   h = 6.626 × 10-34 J s.
Before Planck light was considered to be a wave. Today we know it can be
interpreted as either a particle or a wave. As a wave, bright light can be
explained as a large amplitude in the electric and magnetic fields. As a
particle, bright light would be explained by a large number of photons.
Coherent Light
Lamps, flashlights, etc… all produce light. But this light is released in
many directions, and the light is very weak and diffuse. In coherent
light the wavelength and frequency of the photons emitted are the
same. The amplitude may vary. Such things as lasers and
holograms are composed of coherent light.
                                                    Incoherent




                                                        Coherent
Lasers
Laser stands for light amplification by stimulated emission of
radiation. A laser is a device that creates and amplifies a narrow,
intense beam of coherent, monochromatic (one wavelength) light.
Here’s how they work.
There are 2 primary states for an atom, an excited state and a
ground state. The ground state is the lowest energy, most stable
state. In the excited state electrons are in a higher energy level. In a
laser, the atoms or molecules of a crystal (such as ruby) or of a gas,
liquid, or other substance are excited in the laser cavity so that more
of them are at higher energy levels (excited state) than are at lower
energy levels. When an excited electron drops back to a lower
energy level, a photon of a particular wavelength is released. This
photon stimulates other electrons to emit photons. All these photons
are in phase.
Holograms
As with any type of wave, light waves can interfere with one another.
The interference of two or more waves will carry the whole
information about all the waves. It is on this basis that holograms
work. Holograms make use of lasers and they work in the following
fashion: (Explanation on next slide.)


    Laser            Beam Splitter

                                                  Mirror
                               Reference
                                 Beam
    Object Beam

                                Light wave
Beam Spreader
                                interference


                                                    Film
            Object                                  Plate
Holograms             (cont.)
As the laser hits the beam splitter, it is split in two. The object beam heads
towards the object of interest, while the reference beam heads toward a
mirror. The beams are identical until the object beam shines on the object.
There some of the light is absorbed; some is reflected toward the film. After
reflecting off the mirror, the reference beam is reunited with the object beam
on the film. Because one beam interacted with the object and the other didn’t,
the two beams will be out of phase and interfere with one another. This
interference pattern is imprinted upon the holographic film plate, creating the
holographic image.
This pattern records the intensity distribution of the reflected light just as an
ordinary camera does. However, it also records the phase distribution. This
means that it contains information about where the waves are in their
oscillating cycles as they strike the film. To determine this the object beam
must be compared with the reference beam. This is accomplished via the
interference. Also unlike an ordinary photo, a hologram contains all its
information in every piece of it.
When viewed in coherent light the object appears in 3-D and viewing a
hologram from different angles will reveal the object from different angles.
Luminous Flux & Illuminance
Luminous flux, Φ, is the rate at which an object emits visible light
(adjusted to the responsiveness of the human eye, which is most
sensitive to yellow-green). It is measured in lumens. Imagine a light
source in the center of a sphere. Luminous flux is the quantity of
light that hits the surface of the sphere per unit time. The size of the
sphere is irrelevant. If the sphere were larger, the same quantity of
light would reach the surface every second, so the flux wouldn’t
change. However, this light would be more spread out, so the
illuminance of the surface would be less than it was with the same
candle in the smaller sphere. Also called illumination, the symbol for
 illuminance is E, not to be confused with
 energy, and is defined as luminous flux per
 unit of surface area: E = Φ / S. The SI unit
 for illuminance is the lux, which is a lumen
 per square meter. The illuminance of the
 sun is about 100,000 lx (lux); for the full
 moon it’s about 0.2 lx. A common, non-SI
 unit for illuminance is the foot-candle,
 which is equivalent to about 10.8 lx.
Illuminance vs. Distance
A point source at P radiates light in all directions. The pic below
shows how light spreads out as it radiates. If the illuminance on the
sheet 1 m from P is 1 unit, then the illuminance on the sheet 2 m from
P is four times less. This is because doubling the distance increases
the area by a factor of four over which the light is spread. Similarly,
3 m from P the illuminance is nine times less, and 4 m from P it’s 16
times less. Note the flux (amount of light) is not changing, but the
illuminance is because the same amount is spread over different
areas. In general, E is proportional to Φ and inversely proportional to
the square of the distance. This is reminiscent of Newton’s inverse
square law for gravitation.                                    1/16
                                                1/9
                                     1/4
                         1



 P
                           1m           2m            3m        4m
angle =    arc length = 1 unit
               Solid Angles
                                                  1 radian
We can measure ordinary, “flat” angles by
the ratio of arc length of a circle to the
radius of the circle. Imagine two radii
shooting out from the center, subtending                             radius
part of the circumference. By definition this                        = 1 unit
ratio is the measure of the angle between
the radii in radians. There are 2 π radians in
a circle since C = 2 π r.
Now imagine a sphere instead of a circle
and a cone shooting out from the center
rather than a two radii (the apex of the cone
is at the center). Instead of part of a circum-
ference, the cone subtends part of the
surface area of the sphere. A solid angle
(measured in steradians) is defined as the
ratio of the subtended surface area of the of
sphere to the square of its radius. This
definition applies even if the subtended area
is not circular. There are 4 π steradians in a
sphere since S = 4 π r 2.
Luminous Intensity
Recall that illuminance is flux per unit area. A related quantity is luminous
intensity, I, which is defined as flux per unit of solid angle. Thus, I = Ø / 4 π,
since there are 4 π steradians in a sphere. You can think of luminous intensity
as the amount of light contained within a cone whose apex is at the source.
The same amount of light confined to a skinnier cone would mean a greater
intensity. Just as the “flat” angle is independent of the size of the circle, the
solid angle is independent of the size of the sphere. The intensity is the same
at every sheet in the pic below. In a sphere 7 m in radius, I is the flux that falls
on a 49 m2 surface on the sphere. The SI unit for intensity is the candela, cd.
                              1 cd = 1 lumen per steradian. A footcandle is the

                            illuminance one foot away from a 1 candela source.




   P
                                1m             2m              3m           4m
Efficiency of light sources
Light sources, like light bulbs, vary in efficiency. This means
that some bulbs, e.g. fluorescent bulbs, will produce more light
while using less energy. (They can do this by producing less
waste heat.) The efficiency of a simple machine is the work
done by the machine divided by the work put into it. In this
context, efficiency is the rate at which light is produced by the
bulb divided by the rate at which energy is used to produce that
light: eff = Ø / P, where P is power. Note that both flux and
power are rates, so eff is really “light over energy.” It is
measured in lumens per watt. A typical candle has an efficiency
of about 0.1 lumen / W. Incandescent bulbs are about 15
lumen / W, but a fluorescent bulb is closer to 70 lumen / W.
A monochromatic source emitting light of around 555 nm in
wavelength would be the ideal in terms of efficiency, with all of
its radiation being visible to us instead of infrared (waste heat).
Credits
   Numerous Images as well as information were obtained from the following sources:

http://archive.ncsa.uiuc.edu/Cyberia/Bima/spectrum.html

http://www.christiananswers.net/q-eden/star-distance.html

http://abalone.cwru.edu/tutorial/enhanced/files/lc/light/light.htm

http://www.netzmedien.de/software/download/java/polarisation/

http://www.howstuffworks.com/sunglass4.htm

http://www.colorado.edu/physics/2000/polarization/polarizationI.html

http://www.cs.brown.edu/exploratory/research/applets/catalog.html

http://www.intl-light.com/handbook/flux.html

http://www.schorsch.com/kbase/glossary/luminous_flux.html

http://www.natmus.min.dk/cons/tp/lightcd/lumen.htm

http://www.bipm.fr/enus/5_Scientific/e_rad_phot/photometry/luminous_flux.html

http://webdesign.about.com/library/weekly/aa111201a.htm

http://www.glenbrook.k12.il.us/gbssci/phys/Class/light/u12l2a.html

http://cowan.bendnet.com/darksky/Illuminance.htm

http://www.chemie.de/tools/units.php3?language=e&property=cd*sr%2Fm%5E2
Credits           (cont.)
http://www.worldlights.com/world/candela.html

http://www.westsidesystems.com/rays.html

http://www.electro-optical.com/bb_rad/emspect.htm

http://violet.pha.jhu.edu/~wpb/spectroscopy/em_spec.html

http://www.augustana.edu/academ/physics/physlets/resources-1/dav_optics/EMWave.html

http://littleshop.physics.colostate.edu/Color_Mixing.html

http://www.phy.ntnu.edu.tw/java/image/rgbColor.html

http://www.nobel.se/physics/educational/tools/relativity/experiment-1.html

http://www.encyclopedia.com/

http://www.colorado.edu/physics/2000/quantumzone/photoelectric2.html

http://www.askjeeves.com/main/followup.asp?
qcat=ref_&ask=what+is+parallax&qsrc=0&o=0&snp=jeeves&qid=9FD4952E186CE248994B552F9E7DDF63&dt=020415
095320&back=ask%3Dwhat%2Bis%2Bparallax%26o%3D0%26fmt%3D&qcatid=62&score=0.76&aj_ques=snapshot
%3DJeeves%26kbid%3D1967190%26item1%3D1990098-
2247110&aj_logid=9FD4952E186CE248994B552F9E7DDF63&aj_rank=1&aj_score=0.76&aj_list1=1990098-
2247110&x=26&y=13

http://www.holonorth.com/anatom.htm

http://www.phys.ufl.edu/~avery/course/3400/f2001/lectures/lecture_lumens.pdf

http://www.schorsch.com/kbase/glossary/solid_angle.html

More Related Content

What's hot

Nature of light
Nature of lightNature of light
Nature of light
JeeSa Sultana
 
Nature of Light
Nature of LightNature of Light
Nature of Light
mlong24
 
Ch 3 -properties of light
Ch 3 -properties of lightCh 3 -properties of light
Ch 3 -properties of light
cphsastronomy
 
Theories About Light
Theories About LightTheories About Light
Theories About Lightdeathful
 
Nature of light (edexcel AS levels)
Nature of light (edexcel AS levels)Nature of light (edexcel AS levels)
Nature of light (edexcel AS levels)
www.fixURscore.com
 
Colors of light (Grade 8)
Colors of light (Grade 8)Colors of light (Grade 8)
Colors of light (Grade 8)
Jimnaira Abanto
 
Chap16 Light
Chap16   LightChap16   Light
Chap16 Light
Galen West
 
Light PowerPoint
Light PowerPointLight PowerPoint
Light PowerPoint
StaceyGreene12
 
Introduction to Light Waves
Introduction to Light WavesIntroduction to Light Waves
Introduction to Light Waves
Hanna Elise
 
Presentation on lights [ gamma team ]
Presentation on lights [ gamma team ]Presentation on lights [ gamma team ]
Presentation on lights [ gamma team ]
Touhidul Shaon
 
Newton
NewtonNewton
Properties of light
Properties of lightProperties of light
Properties of light
Felix Bunagan
 
Study material 12th Physics - Wave Theory of Light
Study material 12th Physics -  Wave Theory of LightStudy material 12th Physics -  Wave Theory of Light
Study material 12th Physics - Wave Theory of Light
Ednexa
 
Wave particle duality
Wave particle dualityWave particle duality
XII - Physics - Wave theory of light
XII - Physics - Wave theory of lightXII - Physics - Wave theory of light
XII - Physics - Wave theory of light
Ednexa
 

What's hot (20)

Nature of light
Nature of lightNature of light
Nature of light
 
Ch7 light(1)
Ch7 light(1)Ch7 light(1)
Ch7 light(1)
 
Nature of Light
Nature of LightNature of Light
Nature of Light
 
Ch 3 -properties of light
Ch 3 -properties of lightCh 3 -properties of light
Ch 3 -properties of light
 
Theories About Light
Theories About LightTheories About Light
Theories About Light
 
Nature of light (edexcel AS levels)
Nature of light (edexcel AS levels)Nature of light (edexcel AS levels)
Nature of light (edexcel AS levels)
 
Colors of light (Grade 8)
Colors of light (Grade 8)Colors of light (Grade 8)
Colors of light (Grade 8)
 
Chap16 Light
Chap16   LightChap16   Light
Chap16 Light
 
Nature of light
Nature of lightNature of light
Nature of light
 
Light PowerPoint
Light PowerPointLight PowerPoint
Light PowerPoint
 
Introduction to Light Waves
Introduction to Light WavesIntroduction to Light Waves
Introduction to Light Waves
 
Presentation on lights [ gamma team ]
Presentation on lights [ gamma team ]Presentation on lights [ gamma team ]
Presentation on lights [ gamma team ]
 
09 light in focus
09 light in focus09 light in focus
09 light in focus
 
Newton
NewtonNewton
Newton
 
The nature of light
The nature of lightThe nature of light
The nature of light
 
Properties of light
Properties of lightProperties of light
Properties of light
 
Light
LightLight
Light
 
Study material 12th Physics - Wave Theory of Light
Study material 12th Physics -  Wave Theory of LightStudy material 12th Physics -  Wave Theory of Light
Study material 12th Physics - Wave Theory of Light
 
Wave particle duality
Wave particle dualityWave particle duality
Wave particle duality
 
XII - Physics - Wave theory of light
XII - Physics - Wave theory of lightXII - Physics - Wave theory of light
XII - Physics - Wave theory of light
 

Similar to Light

PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptxPHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
ZayraAtrero2
 
LIGHT.pptx
LIGHT.pptxLIGHT.pptx
LIGHT.pptx
GretchenJavier1
 
Light final for me
Light final for meLight final for me
Light final for me
Md EnaMul HaQ
 
ch_15_PPT_lecture.pptx
ch_15_PPT_lecture.pptxch_15_PPT_lecture.pptx
ch_15_PPT_lecture.pptx
KathleenSaldon
 
Basics and history of geometrical optics
Basics and history of geometrical opticsBasics and history of geometrical optics
Basics and history of geometrical optics
LABISHETTY CHARAN
 
Physics Light.pptx
Physics Light.pptxPhysics Light.pptx
Physics Light.pptx
Ana Maria Montaño
 
senior high physical science Q2 WEEK 3.pptx
senior high physical science Q2 WEEK 3.pptxsenior high physical science Q2 WEEK 3.pptx
senior high physical science Q2 WEEK 3.pptx
ZayraAtrero2
 
Optics 09 april 2021
Optics 09 april 2021Optics 09 april 2021
Optics 09 april 2021
Anisur Rahman
 
Module No. 43
Module No. 43Module No. 43
Light - The Electromagnetic Spectrum
Light - The Electromagnetic SpectrumLight - The Electromagnetic Spectrum
Light - The Electromagnetic SpectrumVictor Andrei Bodiut
 
Light energy and fundamental of light properties
Light energy and fundamental of light propertiesLight energy and fundamental of light properties
Light energy and fundamental of light properties
EmadElsehly
 
Ch15 - light history
Ch15  - light historyCh15  - light history
Ch15 - light history
cpphysics
 
properties of light
properties of lightproperties of light
properties of light
ArianAvnerDeGuzman
 
19_quantum [Autosaved].ppt
19_quantum [Autosaved].ppt19_quantum [Autosaved].ppt
19_quantum [Autosaved].ppt
VEERSHARMA35
 
Dtu10e lecture ppt_ch03
Dtu10e lecture ppt_ch03Dtu10e lecture ppt_ch03
Dtu10e lecture ppt_ch03
Asma Said,PhD
 
Polarization 1, polarization of light, physical optics
Polarization 1, polarization of light, physical opticsPolarization 1, polarization of light, physical optics
Polarization 1, polarization of light, physical optics
Sumaira ghafoor
 
Diffraction and wave theory of light
Diffraction and wave theory of lightDiffraction and wave theory of light
Diffraction and wave theory of light
adnansher000
 

Similar to Light (20)

PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptxPHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
PHYSICAL SCIENCE OF QUARTER 2 WEEK 4.pptx
 
LIGHT.pptx
LIGHT.pptxLIGHT.pptx
LIGHT.pptx
 
Light
LightLight
Light
 
Light final for me
Light final for meLight final for me
Light final for me
 
Light
LightLight
Light
 
ch_15_PPT_lecture.pptx
ch_15_PPT_lecture.pptxch_15_PPT_lecture.pptx
ch_15_PPT_lecture.pptx
 
Basics and history of geometrical optics
Basics and history of geometrical opticsBasics and history of geometrical optics
Basics and history of geometrical optics
 
Physics Light.pptx
Physics Light.pptxPhysics Light.pptx
Physics Light.pptx
 
senior high physical science Q2 WEEK 3.pptx
senior high physical science Q2 WEEK 3.pptxsenior high physical science Q2 WEEK 3.pptx
senior high physical science Q2 WEEK 3.pptx
 
Optics 09 april 2021
Optics 09 april 2021Optics 09 april 2021
Optics 09 april 2021
 
Module No. 43
Module No. 43Module No. 43
Module No. 43
 
Light - The Electromagnetic Spectrum
Light - The Electromagnetic SpectrumLight - The Electromagnetic Spectrum
Light - The Electromagnetic Spectrum
 
Light and em spectrum
Light and em spectrumLight and em spectrum
Light and em spectrum
 
Light energy and fundamental of light properties
Light energy and fundamental of light propertiesLight energy and fundamental of light properties
Light energy and fundamental of light properties
 
Ch15 - light history
Ch15  - light historyCh15  - light history
Ch15 - light history
 
properties of light
properties of lightproperties of light
properties of light
 
19_quantum [Autosaved].ppt
19_quantum [Autosaved].ppt19_quantum [Autosaved].ppt
19_quantum [Autosaved].ppt
 
Dtu10e lecture ppt_ch03
Dtu10e lecture ppt_ch03Dtu10e lecture ppt_ch03
Dtu10e lecture ppt_ch03
 
Polarization 1, polarization of light, physical optics
Polarization 1, polarization of light, physical opticsPolarization 1, polarization of light, physical optics
Polarization 1, polarization of light, physical optics
 
Diffraction and wave theory of light
Diffraction and wave theory of lightDiffraction and wave theory of light
Diffraction and wave theory of light
 

More from apwazap777 (17)

Mathcentre basic differentiation
Mathcentre basic differentiationMathcentre basic differentiation
Mathcentre basic differentiation
 
Waves
WavesWaves
Waves
 
Thermo
ThermoThermo
Thermo
 
Sound
SoundSound
Sound
 
Optics
OpticsOptics
Optics
 
Magnetism
MagnetismMagnetism
Magnetism
 
Fluids
FluidsFluids
Fluids
 
Electrostatics
ElectrostaticsElectrostatics
Electrostatics
 
Electricfields
ElectricfieldsElectricfields
Electricfields
 
Circuits
CircuitsCircuits
Circuits
 
Chap10 11
Chap10 11Chap10 11
Chap10 11
 
Chap9
Chap9Chap9
Chap9
 
Chap8
Chap8Chap8
Chap8
 
Chap7
Chap7Chap7
Chap7
 
Chap6
Chap6Chap6
Chap6
 
Chap5
Chap5Chap5
Chap5
 
Chap2 3 4
Chap2 3 4Chap2 3 4
Chap2 3 4
 

Light

  • 1. Light •Wave Vs. Particles •Light Transmission •Electromagnetic Waves •Thin Films & Thin Films Interference •Frequency and Wavelength •Michelson-Morely Experiment •Luminosity •Light Vs. Sound •Polarized Light •Space Travel & The Speed of •Planck’s Constant Light •Coherent Light •Why Objects Have Color •Lasers •Primary and Secondary Colors •Holograms •Light Colors Vs. Pigments •Luminous Flux •The Electromagnetic Spectrum •Illuminance •Parallax and Depth Perception •Luminous Intensity •Luminous Flux vs. Power •Luminous vs. Illuminated
  • 2. Light: Introduction For centuries the nature of light was disputed. In the 17th century, Isaac Newton proposed the “corpuscular theory” stating that light is composed of particles. Other scientists, like Robert Hooke and Christian Huygens, believed light to be a wave. Today we know that light behaves as both a wave and as a particle. Light undergoes interference and diffraction, as all waves do, but whenever light is emitted, it is always done so in discreet of packets called photons. These photons carry momentum, but not mass. Robert Hooke Christian Huygens Isaac Newton
  • 3. Wave Vs. Particles Light is an electromagnetic wave. As light travels through space an electric field and a magnetic field oscillate perpendicular to the wave direction and perpendicular to each other. We’ll learn more about these fields in later units. A light wave is transverse rather than longitudinal, since each field oscillates in a plane perpendicular to the direction of the wave. Unlike a pulse traveling down a length of rope, nothing is physically moving in a light wave. Light requires no medium! It can travel through space that contains matter (such as air, glass, or water) or through a vacuum. If light did need a medium in order to propagate, the earth would spend its days submerged in darkness and the sun would not be visible.
  • 4. Electromagnetic Waves Electric and magnetic fields affect charges. Light is an electric field coupled with a magnetic field. The two fields oscillate together but in different planes. To visualize an electromagnetic wave, you must think in 3-D. Let’s put a light wave together one piece at a time. Above is a set of 3-D coordinate axes. The z -axis is vertical, the y-axis is horizontal, and the x -axis is coming out toward you.
  • 5. Electromagnetic Waves (cont.) The red wave represents an oscillating electric field in the y-z plane. (Every point on this curve has an x coordinate of zero.) It is a snapshot in time. At the crests and troughs, the electric field will exert the greatest force on a charge, but in opposite directions. Charges located at the y -intercepts will experience no electric force (at this point in time).
  • 6. Electromagnetic Waves (cont.) In the top right picture, the blue wave represents an oscillating magnetic field in the x-y plane. (Every point on this curve has an z coordinate of zero.) It is a snapshot in time. Like the electric field, the magnetic field is strongest at the crests and troughs. Bottom right is shown an electric and a magnetic field oscillating together. This is an electro- magnetic wave (light). The fields travel through space together. They have the same period and wavelength, but they oscillate in two different planes, which are perpendicular to each other. The electric field, the magnetic field, and the wave direction are all mutually perpendicular. For some additional Wave Pic Light animation pictures, check out these links below. Remember, what you’re Propagation in matter seeing is just a snapshot in time (see animation). Oscillating charge animation
  • 7. Frequency and Wavelength The frequency of a light wave corresponds to the color we see. The amplitude corresponds to brightness. Light Sound Frequency Color Pitch Amplitude Brightness Loudness The frequency of visible light is extremely high compared to that of audible sound. Red light, for example, is the lowest frequency of visible light, but even red light has a frequency of over 400 trillion Hertz. This means if you’re looking at a red light, over 400 trillion full cycles of red light enter your eye every second! The frequency of violet light is even higher—over 750 trillion Hz. Other types of electromagnetic radiation, like X-rays, have even higher frequencies, and some have lower frequencies, like radio waves. Just as our ears are only capable of hearing certain range of sounds (20 – 20,000 Hz), our eyes can only see a small range of frequencies.
  • 8. Frequency and Wavelength (cont.) Because visible light waves have such high frequencies, their wave- lengths are very short. Recall the formula v = λf (wave speed = wavelength × frequency). Since light of any frequency always travels at the same speed in a vacuum, v is a constant. Thus, the bigger f is, the smaller λ must be. Red light, for example, has a wavelength of only about 700 nm. (1 nm = 1 nanometer = 10-9 m = 1 billionth of a meter.) Violet light has an even smaller wavelength, since its frequency is higher. X-rays have still smaller wavelengths. Radio waves can have very long wavelengths (many meters) since their frequencies are so low. High Frequency ↔ Small Wavelength Low Frequency ↔ Long Wavelength Vacuum speed is constant.
  • 9. Historical Background • Before Galileo’s time (around 1600), many people believe that light was infinitely fast. It’s so fast that it seemed like it took no time to get from one place to another. Galileo and an assistant went to the Italian countryside, a mile apart, and tried to measure the speed of light by timing it. All they could determine was that light is much faster than sound. • Later that century (around 1667) a Danish astronomer named Ole Roemer made the first accurate measurement of the speed of light. He had been observing one of Jupiter’s moons, Io (which Galileo had discovered). As Io circled Jupiter, it would be eclipsed by Jupiter periodically. That is, Jupiter would block Io’s view from Earth at regular intervals. Each time Io orbited Jupiter, an eclipse would occur. The time between the eclipses was the period of Io’s orbit. Roemer noticed that the eclipses sometimes took a little longer, and sometimes they took a little less time. Io’s period seemed to fluctuate: first Io would be behind schedule; then it would be ahead of schedule. This pattern repeated itself every year, which hinted to Roemer that the fluctuation had to do with Earth’s motion around the sun.
  • 10. Historical Background (cont.) Because Jupiter is farther from the sun, it moves much slower around the sun (recall Kepler’s third law). During the six-month period depicted above, Earth is moving away from Jupiter. Therefore, the light carrying the information of the eclipse took a little longer to reach Earth, since Earth was “running away” from that light. At the end of the six months, the light from Io had to travel an extra distance about equal to the diameter of Earth’s orbit. Roemer’s observed that Io eclipses were about 8 minutes behind schedule after six months. Knowing approximately Earth’s orbital diameter, Roemer calculated the speed of light at around 125,000 miles per second! Roemer’s speed, as great as it was, was actually an underestimate. The true speed of light is just a half a smidgeon under 3 · 108 m/s, which is about 186,300 miles per second! We call this speed c. c = 2.9979 × 108 m/s ≈ 3 × 108 m/s
  • 11. Historical Background (cont.) • Roemer’s main contribution was proving that the speed of light is finite. Since Roemer, several people contributed to determining the precise value for c. In 1849 Louis Fizeau found an excellent approximation for c without resorting to astronomical means. He used a rapidly rotating, toothed wheel. He shined a beam of light through one opening between the teeth, which reflected off a mirror over 5 miles away. When the wheel spun fairly slowly, the light could easily pass through the opening, reflect, and pass through it again in the other direction before its path was blocked by the next tooth of the wheel. By making the wheel spin faster and faster until the reflected beam of light was blocked, Fizeau was able to calculate c. • Jean-Bernard Foucault also made accurate measurements of c. He shined light at a rotating mirror, which reflected to a stationary mirror, back to the rotating mirror, and finally back toward the source. Because the rotating mirror turned slightly while the light was traveling to the stationary mirror and back, the rotating mirror reflected the light at a slight angle. This angle allowed him to calculate c.
  • 12. Michelson-Morely Experiment Albert Michelson is best known for an experiment he did with Edward Morely in 1887. At the time it wasn’t understood that light needed no medium through which to travel. It was proposed that light traveled through an invisible “ether” in space. The Michelson-Morely experiment was an attempt to detect Earth’s motion through the ether. Here’s how it worked: First imagine you’re standing still outside and there is a wind coming from the north. If you run north, you’ll measure a greater wind speed. If you run south, you’ll measure it slower. Whether you run north or south, though, you’ll still feel the wind coming from the north. If you run east or west, however, not only will the wind seem to change speed, so will its direction. Now imagine a race between two equally fast swimmers. They each go the same distance in a river, but one goes upstream and back while the other goes directly across the river and back. With no current the race would definitely be a tie, since their speeds and distances are the same. With a current, however, the cross-stream swimmer will win. This is not obvious. You should try to prove this. For a hint see the “ river crossing--relative velocities” slide from the presentation on vectors. It involves the same principle as Michelson’s interferometer (but without lasers). Michelson-Morely
  • 13. Michelson-Morely Experiment (cont.) Michelson built something called an interferometer Michelson to try to measure a change in the speed of light in two different directions. The Earth moving through the ether around the sun is analogous to a wind or current. Instead of racing two swimmers, Michelson raced beams of light. Light was shone onto a mirror that allowed half of it to pass through. Each beam traveled the same distance before being reflected back and allowed to recombine. Based on the interference pattern of the combined waves, Michelson should have been able to detect a winner. But no matter how the experiment was done, the race was always a tie. This eventually forced physicist to abandon the ether theory. Einstein resolved the problem in 1905 with his theory of special relativity. In it he asserts that the speed of light is the same no matter how fast or Einstein which way an observer is moving.
  • 14. Light Vs. Sound It is important to emphasize just how fast light is. Compared to light, sound is a snail. A wise person once said, “Light travels faster than sound, which is why some people appear bright until you hear them speak.” Have you ever watched a baseball game from a distance? You see the batter make contact with the ball, but the sound of the wallop is delayed. This is because, although sound is really fast, light is super-duper fast. For all practical purposes, when you see something is when it happened (at least for events here on Earth). You can determine how far away a lightning strike is by counting seconds from the time you see the lightning until you hear the thunder. It takes sound about 5 s to travel a mile, so if the thunder lags behind the lightning by 2 or 3 s, then the lightning strike occurred about half a mile away. Problem: You hear a thunder clap 6 s after you see the lightning. Assume the speed of sound to be 343 m/s. How far away is the lightning? (Solution on next slide)
  • 15. Light Vs. Sound (cont.) Answer: Ignoring the small amount of time light needs to travel to you, we have: d = v t = (343 m/s) (6 s) = 2058 m Problem: Now let’s do the same problem without ignoring light’s travel time: Light Waves Sound Waves Solution on next slide 
  • 16. Light Vs. Sound (cont.) Answer: Let t = time it takes the light to reach you. In that time the sound of the thunder only travels a short distance. Since you hear the thunder 6 s after you see the lightning, the sound travels for (6 s) + t. The light and sound each travel the same distance, so: 343 (t + 6) = (3 · 108) t ⇒ t = 6.8600078 · 10-6 s ⇒ d = 2058.0024 m So, the lightning strike really occurred a couple millimeters farther away than we had calculated the first way. Note: The difference in results is meaningless here since we can’t know the time delay or the speed of sound to as many significant digits as our answer has.
  • 17. Space Travel & The Speed of Light We can’t always ignore the time light takes to travel. Whenever you look into the night sky, for example, you’re really looking back into time. The stars you see are so far away that the light they emit takes years to reach us. Nearby stars are tens or hundreds light-years away. A light-year is the distance light travels in one year, almost 6 trillion miles. (Our sun is only about 8 light-minutes away). Problem: Schmedrick is on a space journey heading toward Alpha Centauri, the nearest star excluding the sun, which is about 4.3 light- years away. Schmedrick's rocket goes a constant 0.03 c (3% of the speed of light). As he passes Alpha Centauri he sends a radio message back to Earth and continues traveling away from Earth. The Earthlings reply immediately. How long must Schmedrick wait for his reply? Solution on next slide 
  • 18. Space Travel & The Speed of Light (cont.) Answer: Since we know a trip back and forth from Alpha Centauri takes a total of 8.6 years, we can set up our equation in the following way: d = vt (c = 1 in light years per year) 8.6 + v t = c t ⇒ 8.6 + 0.03 c t = c t ⇒ 8.6 + 0.03 t = t A. C. ⇒ 8.6 = 0.97 t S. ⇒ 8.6 / 0.97 = 8.87 vt 4.3 ly Schmedrick will have to wait 8.87 years to get a reply back from earth. Links: Find out more about Alpha Centauri here.
  • 19. Why Objects Have Color Visible light is a combination of many wavelengths (colors), which give it a white appearance. When light hits an object certain wavelengths are reflected and others are absorbed. The reflected wavelengths are the ones we see and determine the color of an object. In the first picture the tomato absorbs blue and green wavelengths and reflects the red wavelength. In the second picture red light is shone upon the tomato. The tomato is still reflecting the red wavelength and thus still looks red. But in the 3rd picture blue light is shone upon the tomato, and since the tomato absorbs the blue wavelength the tomato appears to be black. Links: Prism (light broken down in different wavelengths.
  • 20. Primary and Secondary Colors The primary light colors are Red, Blue, and Green (RGB). The secondary light colors are Yellow, Cyan, and Magenta. Combining pigments in painting is exactly the opposite: The primary pigments are Yellow, Cyan, Magenta. The secondary pigments are Red, Blue and Green. Animation
  • 21. Light Colors Vs. Pigments Primary colors in light are red, green, and blue because when put together in the right intensities they form white light. Televisions use this idea to project pictures on the screen. When lights these colors are combined in pairs they form the secondary colors for light. Pigment colors are seen by reflected light. A primary pigment color is one that absorbs only one primary light color and reflects the other two primary colors. Thus yellow, magenta, and cyan are the primary colors for pigments. Yellow reflects red & green, cyan reflects green & blue, and magenta reflects red & blue. Secondary pigments colors then are blue, green, and red because they absorb two primary light colors and reflect their own light color back.
  • 22. The Electromagnetic Spectrum The electromagnetic spectrum covers a wide range of wavelengths and photon energies. Visible light ranges from 400 to 700 nanometers. About 550 nanometers, which is a yellowish green, is the wavelength to which our eyes are most responsive. Only a small portion of the electromagnetic spectrum is visible to us. The smaller the wavelength, the more energy each photons of the light has.
  • 23. Electromagnetic Spectrum (cont.) Wavelengths other that visible light serve useful purposes: Radio waves are very long (a few centimeters to 6 football fields) and can be used to send signals. These signals are transmitted by radio stations. They transmit information and music via amplitude modulation (AM) and frequency modulation (FM). Microwaves (a few millimeters long) are also used in communications. Microwave ovens are great for heating food since food is primarily water, and microwaves have just the right frequency to get water molecules vibrating. Infrared (micrometers in length) are used in remote controls to change the channel, and they are also radiated by objects that are warmer than their surrounding (like your body). They make night vision equipment possible. Ultraviolet light is harmful to our bodies because its wavelength is so small. Short wavelength mean high energy for photons. UV causes our skin to tan and burn. Fortunately, the ozone layer blocks most UV radiation, but prolonged exposure to the sun should be avoided, since UV rays can cause skin cancer. On the positive side UV radiation helps people to produce their own vitamin D.
  • 24. Electromagnetic Spectrum (cont.) X-rays are even more energetic, and hence more dangerous, than UV rays, but luckily they cannot penetrate our ozone layer. They are produced in space and of course are used by doctors to get pictures of your bones. Gamma rays are the most energetic of the light waves and little is known about them other than they are very harmful to living cells and are used by doctors to kill certain cells and for other operations. They are produced in nuclear explosions. Like other high energy rays, our atmosphere protects us from gamma rays. Astronomers have many different types of telescopes at their disposal to observe the universe in all parts of electromagnetic spectrum. Some telescopes are ground-based; others are space-based: Arecibo Spitzer Hubble Keck Compton
  • 25. Parallax and Depth Perception Parallax is any alteration in the apparent position of an object due to a change in the position of the observer. A simple demonstration of this effect can be seen by extending your thumb at arm’s length. Then close one eye at a time and note how your thumb appears to jump left and right relative to the background. Now move your thumb closer and note how the jump is greater. This technique can be used in astronomy to find a star’s distance from Earth. For distant objects like stars, astronomers must move their “eyes” as far apart as possible. They accomplish this by observing the apparent displacement of a star against the background of more distant stars resulting from the change of the Earth’s position in orbit. The parallax angle is exaggerated in the picture below. θ θ ≅θ
  • 26. Parallax and Depth Perception (cont.) The picture is not to scale. The diameter of Earth’s orbit is very small compared to the distance of the star being measured, which in turn is very small compared to the distance of the background stars. For this reason the angular displacement of points A and B, as seen from Earth at any point in its orbit, is almost exactly the same as the parallax angle. Problem: Back on Earth Schmedrick attempts to figure out how far away a certain distant star is. He figures out a 2 degree parallax angle from two different observations made during the earth’s period. How far away is the star? (Earth 93 million miles from the sun.) Solution on next slide. A 2o B
  • 27. Parallax and Depth Perception (cont.) Answer: Let R be the Earth-sun distance and x the distance to the star in question. Thus, tan (θ / 2) = R / x. With θ = 2° and R = 93 million miles, x ≈ 5.33 × 109 miles The Star Schmedrick is looking at is approximately 5 billion miles away. So, Schmed must have been imagining this star, because it’s much too close for any real life star (other than the sun). R 2o x
  • 28. Luminous vs. Illuminated A luminous object is a body that produces its own light such as the sun or a light bulb. An illuminated object is a body that reflects light, just like the moon, people, and buildings. Some objects, like water and glass, transmit light to some extent. In order to be seen, light must come from an object one way or the other.
  • 29. Luminosity & Magnitude Luminosity is the rate at which energy of all types, and in all directions, is radiated by an object. The luminosity of a star depends on its size and its temperature: L ∝ R 2 T 4. The sun is a medium- sized star with a luminosity of 3.8×1026 J/s. The known luminosities of stable stars range from about a millionth that of the sun for a relatively cool white dwarf to about a million times that of the sun for the hottest known super-giant star. Astronomers assign stars magnitudes based on how bright they are. Apparent magnitude measures how bright a star appears to be from Earth. Absolute magnitude measures its true luminosity. The brighter the star, the lower its luminosity. Every 5 magnitudes corresponds to brightness changing by a factor of 100. For example, a magnitude 1 star is 10,000 times brighter than a magnitude 11 star. Besides the sun, the brightest star as seen from Earth is Sirius with an apparent magnitude of -1.6.
  • 30. Light Transmission Transparent: Materials, such as window glass, through which light can travel easily and through which other objects can clearly be seen. Translucent: Materials, such as glass blocks, through which light can pass through but no clear image can be seen. Opaque: Materials which absorb and reflect light. Objects cannot be seen through the material. Most objects are opaque.
  • 31. Thin Films & Thin Film Interference The thin film effect refers to colors seen in such things as soap bubbles and oil spills. It occurs as a result of the constructive and destructive interference of light waves, not because of refraction as in a prism. When light hits a bubble, some of it is reflected by the outer (air-soap) interface (ray #1), while some penetrates the bubble wall and is reflected by the inner (soap-air) interface (ray #2). The two reflected rays interfere with one another. Typically, most wavelengths will be Guinness Soap Bubble Records out of phase since #2 has to travel a greater distance than #1. However, one wavelength will be in incident ray phase and this corresponds to the color produced. The color depends on how great the difference in #1 distance is that the two rays travel, and this distance #2 depends on bubble thickness. The variations in reflected thickness (thinner at the top, thicker at the bottom) rays are responsible for the different colors. Soap Bubble Wall Continued on Next
  • 32. Thin Films (cont.) When light moving through the air encounters the denser film the reflected ray is inverted, just like a pulse traveling down a slinky is inverted when it reflects at the connection point with a heavier spring. The transmitted ray is not inverted, which is also the situation with slinky and spring. When the transmitted ray encounters the soap-air interface at the inside of the bubble, again some of it is reflected back. This time, however, the wave is not inverted (just as a pulse traveling on a heavy spring is not inverted when it reflects at the connection point with a slinky). The two reflected rays may or may not be in phase; it depends on how thick the film is. Since white light is comprised of many wavelengths, those that are nearly in phase after reflecting off the bubble surfaces will be reinforced (constructive interference). This is the color that will appear on the bubble. The other wavelengths are out of phase (destructive interference) and are, at least partially, cancelled out. Since gravity causes the bubble to be thicker near the bottom, different wavelengths are reinforced at different heights, producing bands of colors. Interestingly, a bubble on the space shuttle will not produce bands of different colors. This is because the shuttle is in free fall around Earth, which means bubbles behavior as if they’re in a gravity-free environment. Thus, bubbles are of uniform thickness. Continued on Next
  • 33. Thin Films (cont.) So how do we determine which color will be produced at a particular point on a bubble or other thin film? Well, if the thickness of the film is λ/4, then light of wavelength λ will be reinforced. Here’s why: The then the round trip in the film will be λ/2. This means the two waves will be in phase, since one was inverted and one wasn’t. Bubble Wall λ /4 Original Wave Transmitted wave superimposed with upright wave from 2nd Inverted wave reflection from 1st reflection superimposed with upright wave from 2nd reflection air outside bubble air inside bubble
  • 34. Polarized Light Be am Light coming directly from the sun or o’ L Electric Field igh other sources is unpolarized, meaning t Orientations the electric and magnetic fields oscillate in many different planes. Polarized light refers to light in which all waves have electric fields oscillating in the same plane. Imagine trying to pass a large piece of sheet metal through the bars of a jail cell. To do this you would have to orient the sheet vertically (or nearly so), otherwise the bars would block the sheet. Here, the bars are analogous to a polarizing filter, and the sheet is analogous to the plane in which the electric field is oscillating. A polarizing filter is made of a material with long molecules that allow electromagnetic waves of one orientation through. If a wave has an electric field with any other orientation, the filter will only allow a component to pass through, absorbing the rest. Note that only transverse waves such as light can be polarized. Much of the light we see is at least partially polarized. For example, when light reflects off of surfaces it is partially polarized. Some sunglasses contain polarizing filters which helps to block glare (such as the glare that is noticeable when looking out over a lake on a sunny day). Polarized Light Glare Continued 
  • 35. Polarized Light (cont.) Unpolarized light propagates in all orientations. No particular orientation is preferred. When it passes through a filter that only allows vertical components of electric fields to pass, its intensity is cut in half. This is because, on average, the light is “half horizontal and half vertical” in terms of electric field components. All horizontal components are blocked, making the resulting polarized light half as bright. Now, imagine that you place another filter that is perpendicular to the direction of the first one, i.e., a filter that only allows the horizontal components of electric fields to pass through. This would completely block the remaining light. Thus, any two perpendicular filters will block all incoming light. Suppose now that the two filters are offset by some angle θ. Regardless of the angle, the first filter blocks half the light. If θ = 0, the second filter has no effect. If θ = 90°, the second filter blocks the other half of the light. In gen- eral, when polarized light with an electric field of amplitude E passes through the second filter, the amplitude will drop to E cosθ. Furthermore, since the energy a wave carries is proportional to the square of its ampli- tude, the intensity of the light will be the original intensity multiplied by cos 2θ. Blocking Light Continued on Next
  • 36. “Twisting” of Light We know that if θ = 90° between two filters, then no light will make it past the second one. At other angles light will pass through both, changing the orientation of its electric field each time. So, what if we arranged several polarizing filters so that the angle between any two consecutive filters is less than 90°? The answer is that light twists its way through the filters, even if the angles between the filters adds up to 90°. With each pass the light is oriented in a new direction, and this new orientation has a component parallel to the orientation of the next filter. Light Enters Light Exits Twisting Light
  • 37. Quantum Mechanic--Background Recall that a black body is an ideal absorber of all incident radiation. A hot black body is also a perfect emitter--radiation is the result of its temperature, and since none of this is absorbed, it is a perfect emitter of radiation. A black body emits all wavelengths of light but not equally; there is always a wavelength in which the radiation peaks. The hotter the black body, the smaller the peak wavelength. Objects around you are cool, so their peak is in the infrared. The sun is hot enough to peak in the visible spectrum (all other wavelengths are emitted too but at lower intensities). In the late 19th century classical physics had predicted something impossible: as the temperature rises, the intensity of the peak radiation approaches infinity (red dashed line). The theory did match experimental data for large wavelengths but failed for small ones. This was known as the “ultraviolet catastrophe.”
  • 38. Planck’s Constant In 1900 Max Planck came up with a revolutionary way to resolve the problem by assuming that energy came in discrete amounts (quanta). This was the beginning of quantum mechanics. Each quantum of light is called a photon, and its energy is given by E = h f, where f is the frequency of the radiation and h is the constant of proportionality called Plank’s constant. The formula states that higher frequency light has proportionally more energy per photon. Einstein lent credence to Plank’s ideas by explaining the photoelectric effect in a similar manner. Robert Millikan did a series of experiments involving the Max Plank photoelectric effect and calculated the constant: h = 6.626 × 10-34 J s. Before Planck light was considered to be a wave. Today we know it can be interpreted as either a particle or a wave. As a wave, bright light can be explained as a large amplitude in the electric and magnetic fields. As a particle, bright light would be explained by a large number of photons.
  • 39. Coherent Light Lamps, flashlights, etc… all produce light. But this light is released in many directions, and the light is very weak and diffuse. In coherent light the wavelength and frequency of the photons emitted are the same. The amplitude may vary. Such things as lasers and holograms are composed of coherent light. Incoherent Coherent
  • 40. Lasers Laser stands for light amplification by stimulated emission of radiation. A laser is a device that creates and amplifies a narrow, intense beam of coherent, monochromatic (one wavelength) light. Here’s how they work. There are 2 primary states for an atom, an excited state and a ground state. The ground state is the lowest energy, most stable state. In the excited state electrons are in a higher energy level. In a laser, the atoms or molecules of a crystal (such as ruby) or of a gas, liquid, or other substance are excited in the laser cavity so that more of them are at higher energy levels (excited state) than are at lower energy levels. When an excited electron drops back to a lower energy level, a photon of a particular wavelength is released. This photon stimulates other electrons to emit photons. All these photons are in phase.
  • 41. Holograms As with any type of wave, light waves can interfere with one another. The interference of two or more waves will carry the whole information about all the waves. It is on this basis that holograms work. Holograms make use of lasers and they work in the following fashion: (Explanation on next slide.) Laser Beam Splitter Mirror Reference Beam Object Beam Light wave Beam Spreader interference Film Object Plate
  • 42. Holograms (cont.) As the laser hits the beam splitter, it is split in two. The object beam heads towards the object of interest, while the reference beam heads toward a mirror. The beams are identical until the object beam shines on the object. There some of the light is absorbed; some is reflected toward the film. After reflecting off the mirror, the reference beam is reunited with the object beam on the film. Because one beam interacted with the object and the other didn’t, the two beams will be out of phase and interfere with one another. This interference pattern is imprinted upon the holographic film plate, creating the holographic image. This pattern records the intensity distribution of the reflected light just as an ordinary camera does. However, it also records the phase distribution. This means that it contains information about where the waves are in their oscillating cycles as they strike the film. To determine this the object beam must be compared with the reference beam. This is accomplished via the interference. Also unlike an ordinary photo, a hologram contains all its information in every piece of it. When viewed in coherent light the object appears in 3-D and viewing a hologram from different angles will reveal the object from different angles.
  • 43. Luminous Flux & Illuminance Luminous flux, Φ, is the rate at which an object emits visible light (adjusted to the responsiveness of the human eye, which is most sensitive to yellow-green). It is measured in lumens. Imagine a light source in the center of a sphere. Luminous flux is the quantity of light that hits the surface of the sphere per unit time. The size of the sphere is irrelevant. If the sphere were larger, the same quantity of light would reach the surface every second, so the flux wouldn’t change. However, this light would be more spread out, so the illuminance of the surface would be less than it was with the same candle in the smaller sphere. Also called illumination, the symbol for illuminance is E, not to be confused with energy, and is defined as luminous flux per unit of surface area: E = Φ / S. The SI unit for illuminance is the lux, which is a lumen per square meter. The illuminance of the sun is about 100,000 lx (lux); for the full moon it’s about 0.2 lx. A common, non-SI unit for illuminance is the foot-candle, which is equivalent to about 10.8 lx.
  • 44. Illuminance vs. Distance A point source at P radiates light in all directions. The pic below shows how light spreads out as it radiates. If the illuminance on the sheet 1 m from P is 1 unit, then the illuminance on the sheet 2 m from P is four times less. This is because doubling the distance increases the area by a factor of four over which the light is spread. Similarly, 3 m from P the illuminance is nine times less, and 4 m from P it’s 16 times less. Note the flux (amount of light) is not changing, but the illuminance is because the same amount is spread over different areas. In general, E is proportional to Φ and inversely proportional to the square of the distance. This is reminiscent of Newton’s inverse square law for gravitation. 1/16 1/9 1/4 1 P 1m 2m 3m 4m
  • 45. angle = arc length = 1 unit Solid Angles 1 radian We can measure ordinary, “flat” angles by the ratio of arc length of a circle to the radius of the circle. Imagine two radii shooting out from the center, subtending radius part of the circumference. By definition this = 1 unit ratio is the measure of the angle between the radii in radians. There are 2 π radians in a circle since C = 2 π r. Now imagine a sphere instead of a circle and a cone shooting out from the center rather than a two radii (the apex of the cone is at the center). Instead of part of a circum- ference, the cone subtends part of the surface area of the sphere. A solid angle (measured in steradians) is defined as the ratio of the subtended surface area of the of sphere to the square of its radius. This definition applies even if the subtended area is not circular. There are 4 π steradians in a sphere since S = 4 π r 2.
  • 46. Luminous Intensity Recall that illuminance is flux per unit area. A related quantity is luminous intensity, I, which is defined as flux per unit of solid angle. Thus, I = Ø / 4 π, since there are 4 π steradians in a sphere. You can think of luminous intensity as the amount of light contained within a cone whose apex is at the source. The same amount of light confined to a skinnier cone would mean a greater intensity. Just as the “flat” angle is independent of the size of the circle, the solid angle is independent of the size of the sphere. The intensity is the same at every sheet in the pic below. In a sphere 7 m in radius, I is the flux that falls on a 49 m2 surface on the sphere. The SI unit for intensity is the candela, cd. 1 cd = 1 lumen per steradian. A footcandle is the illuminance one foot away from a 1 candela source. P 1m 2m 3m 4m
  • 47. Efficiency of light sources Light sources, like light bulbs, vary in efficiency. This means that some bulbs, e.g. fluorescent bulbs, will produce more light while using less energy. (They can do this by producing less waste heat.) The efficiency of a simple machine is the work done by the machine divided by the work put into it. In this context, efficiency is the rate at which light is produced by the bulb divided by the rate at which energy is used to produce that light: eff = Ø / P, where P is power. Note that both flux and power are rates, so eff is really “light over energy.” It is measured in lumens per watt. A typical candle has an efficiency of about 0.1 lumen / W. Incandescent bulbs are about 15 lumen / W, but a fluorescent bulb is closer to 70 lumen / W. A monochromatic source emitting light of around 555 nm in wavelength would be the ideal in terms of efficiency, with all of its radiation being visible to us instead of infrared (waste heat).
  • 48. Credits Numerous Images as well as information were obtained from the following sources: http://archive.ncsa.uiuc.edu/Cyberia/Bima/spectrum.html http://www.christiananswers.net/q-eden/star-distance.html http://abalone.cwru.edu/tutorial/enhanced/files/lc/light/light.htm http://www.netzmedien.de/software/download/java/polarisation/ http://www.howstuffworks.com/sunglass4.htm http://www.colorado.edu/physics/2000/polarization/polarizationI.html http://www.cs.brown.edu/exploratory/research/applets/catalog.html http://www.intl-light.com/handbook/flux.html http://www.schorsch.com/kbase/glossary/luminous_flux.html http://www.natmus.min.dk/cons/tp/lightcd/lumen.htm http://www.bipm.fr/enus/5_Scientific/e_rad_phot/photometry/luminous_flux.html http://webdesign.about.com/library/weekly/aa111201a.htm http://www.glenbrook.k12.il.us/gbssci/phys/Class/light/u12l2a.html http://cowan.bendnet.com/darksky/Illuminance.htm http://www.chemie.de/tools/units.php3?language=e&property=cd*sr%2Fm%5E2
  • 49. Credits (cont.) http://www.worldlights.com/world/candela.html http://www.westsidesystems.com/rays.html http://www.electro-optical.com/bb_rad/emspect.htm http://violet.pha.jhu.edu/~wpb/spectroscopy/em_spec.html http://www.augustana.edu/academ/physics/physlets/resources-1/dav_optics/EMWave.html http://littleshop.physics.colostate.edu/Color_Mixing.html http://www.phy.ntnu.edu.tw/java/image/rgbColor.html http://www.nobel.se/physics/educational/tools/relativity/experiment-1.html http://www.encyclopedia.com/ http://www.colorado.edu/physics/2000/quantumzone/photoelectric2.html http://www.askjeeves.com/main/followup.asp? qcat=ref_&ask=what+is+parallax&qsrc=0&o=0&snp=jeeves&qid=9FD4952E186CE248994B552F9E7DDF63&dt=020415 095320&back=ask%3Dwhat%2Bis%2Bparallax%26o%3D0%26fmt%3D&qcatid=62&score=0.76&aj_ques=snapshot %3DJeeves%26kbid%3D1967190%26item1%3D1990098- 2247110&aj_logid=9FD4952E186CE248994B552F9E7DDF63&aj_rank=1&aj_score=0.76&aj_list1=1990098- 2247110&x=26&y=13 http://www.holonorth.com/anatom.htm http://www.phys.ufl.edu/~avery/course/3400/f2001/lectures/lecture_lumens.pdf http://www.schorsch.com/kbase/glossary/solid_angle.html