Leed Modeling
•Download as PPT, PDF•
1 like•297 views
The document discusses changes to LEED 2009 related to modeling and energy savings certification. Key changes include new prerequisites and options for minimum energy performance, increased emphasis on on-site renewable energy and measurement/verification of energy savings. Prescriptive compliance paths now reference the ASHRAE Advanced Energy Design Guides and Core Performance Guide.
Report
Share
Report
Share
Recommended
ASHRAE 90 1 The Big Picture
Jeff Boldt of KJWW presents ASHRAE 90.1, The Big Picture. Jeff is a member of the 90.1 Mechanical Sub-Committee. Presented at the 2008 ASHRAE Region VI CRC in Chicago, Illinois.
May 15, 16, 17
Ashrae 90.1 2004 appendix g - performance rating method
This document provides an overview of ASHRAE 90.1-2004 Appendix G Performance Rating Method, which provides modeling rules for rating building designs that aim to exceed minimum energy code compliance. It describes key aspects of the performance rating method including how it allows for more flexible modeling of energy efficiency measures compared to a basic code compliance model. It also summarizes federal building energy efficiency requirements and LEED rating systems that reference Appendix G for demonstrating energy savings above minimum standards.
What is ASHRAE 90.1?
The document provides an overview of ASHRAE Standard 90.1, which establishes minimum requirements for energy efficiency in buildings. It discusses the history and maintenance process of the standard, which is updated every three years. Key changes in the 2010 version include more stringent building envelope requirements, improved HVAC equipment efficiencies, and lighting improvements. The presentation describes these changes and provides suggestions for complying with the updated standard.
SESG Seminar Presentation
The document summarizes key changes to building energy regulations in the UK in 2010, including Part L and Section 6. It discusses changes to the notional building baseline, target emission rates, limits on fabric performance and system efficiencies, lighting and ventilation requirements, and the impact on dynamic simulation tools for compliance assessments. The 2010 regulations introduced stricter standards and aimed to reduce carbon emissions by 30% compared to previous regulations.
ashrae 62.1
This document summarizes the ASHRAE Standard 62.1 Indoor Air Quality Procedure and its potential use for improving indoor air quality and energy efficiency in buildings certified under the LEED green building rating system. It provides examples of how the IAQ Procedure has been successfully applied in various new and existing building projects, including schools, theaters, offices, and retail stores, to reduce outdoor air intake and HVAC energy costs while maintaining acceptable indoor air quality. It also discusses ongoing efforts to develop more specific guidance on applying the IAQ Procedure and gain broader acceptance of its use for demonstrating indoor air quality performance under LEED.
Commercial Condensing Boiler Optimization
Technical overview of the research questions and findings as well as a discussion of targeted recommendations for utility energy efficiency programs and operator learning.
Condensing Boiler Optimization
This document provides an overview and agenda for a hydronic heating conference. It discusses the benefits of condensing boilers over conventional boilers, including increased efficiency from condensing combustion gases. It also notes research being conducted on optimizing condensing boiler installations in Minnesota homes to improve efficiency and contractor confidence. The research involves monitoring existing condensing boiler installations, retrocommissioning them to lower supply temperatures and better match load, and installing new boilers using developed quality installation protocols.
LEED EBOM Session 1
This document provides an overview of the LEED EBOM certification process. It introduces the project team and consultants, outlines the purpose and benefits of LEED certification for existing buildings. It then reviews the credit categories and definitions, certification process which begins with prerequisites and occupant comfort surveys, and schedules for establishing project teams, collecting building data, and submitting for certification review.
Recommended
ASHRAE 90 1 The Big Picture
Jeff Boldt of KJWW presents ASHRAE 90.1, The Big Picture. Jeff is a member of the 90.1 Mechanical Sub-Committee. Presented at the 2008 ASHRAE Region VI CRC in Chicago, Illinois.
May 15, 16, 17
Ashrae 90.1 2004 appendix g - performance rating method
This document provides an overview of ASHRAE 90.1-2004 Appendix G Performance Rating Method, which provides modeling rules for rating building designs that aim to exceed minimum energy code compliance. It describes key aspects of the performance rating method including how it allows for more flexible modeling of energy efficiency measures compared to a basic code compliance model. It also summarizes federal building energy efficiency requirements and LEED rating systems that reference Appendix G for demonstrating energy savings above minimum standards.
What is ASHRAE 90.1?
The document provides an overview of ASHRAE Standard 90.1, which establishes minimum requirements for energy efficiency in buildings. It discusses the history and maintenance process of the standard, which is updated every three years. Key changes in the 2010 version include more stringent building envelope requirements, improved HVAC equipment efficiencies, and lighting improvements. The presentation describes these changes and provides suggestions for complying with the updated standard.
SESG Seminar Presentation
The document summarizes key changes to building energy regulations in the UK in 2010, including Part L and Section 6. It discusses changes to the notional building baseline, target emission rates, limits on fabric performance and system efficiencies, lighting and ventilation requirements, and the impact on dynamic simulation tools for compliance assessments. The 2010 regulations introduced stricter standards and aimed to reduce carbon emissions by 30% compared to previous regulations.
ashrae 62.1
This document summarizes the ASHRAE Standard 62.1 Indoor Air Quality Procedure and its potential use for improving indoor air quality and energy efficiency in buildings certified under the LEED green building rating system. It provides examples of how the IAQ Procedure has been successfully applied in various new and existing building projects, including schools, theaters, offices, and retail stores, to reduce outdoor air intake and HVAC energy costs while maintaining acceptable indoor air quality. It also discusses ongoing efforts to develop more specific guidance on applying the IAQ Procedure and gain broader acceptance of its use for demonstrating indoor air quality performance under LEED.
Commercial Condensing Boiler Optimization
Technical overview of the research questions and findings as well as a discussion of targeted recommendations for utility energy efficiency programs and operator learning.
Condensing Boiler Optimization
This document provides an overview and agenda for a hydronic heating conference. It discusses the benefits of condensing boilers over conventional boilers, including increased efficiency from condensing combustion gases. It also notes research being conducted on optimizing condensing boiler installations in Minnesota homes to improve efficiency and contractor confidence. The research involves monitoring existing condensing boiler installations, retrocommissioning them to lower supply temperatures and better match load, and installing new boilers using developed quality installation protocols.
LEED EBOM Session 1
This document provides an overview of the LEED EBOM certification process. It introduces the project team and consultants, outlines the purpose and benefits of LEED certification for existing buildings. It then reviews the credit categories and definitions, certification process which begins with prerequisites and occupant comfort surveys, and schedules for establishing project teams, collecting building data, and submitting for certification review.
Commercial Condensing Boiler Optimizaiton
Senior Mechanical Engineer Russ Landry presented his research on Commercial condensing boilers at the 2016 Natural Gas Conservation Convention.
Breeam+vs+leed
This report compares the BREEAM and LEED environmental assessment methods for buildings. BREEAM was launched in 1990 in the UK and focuses on a broader scope of social impacts, while LEED was developed in 2000 in the US. Both methods assess buildings across multiple categories and award credits based on weighted points to determine a rating. Key differences include BREEAM having more credits and categories overall, while LEED categories cover some issues addressed across multiple BREEAM sections. The report concludes there are significant differences in their methodologies and scopes despite common aims, and an alignment effort is ongoing.
R4103111114
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
LEED v4: Life Cycle Assessments & Environmental Product Declarations
Looking to learn about Environmental Product Declarations and Life Cycle Assessment for your next green building project? Poplar Network, the leading green building network and provider of LEED education, is back with another insightful presentation. Gain a deeper understanding of the holistic analysis of a product's environmental impact here!
Applying ashrae 62.1 to LEED
This document discusses how to apply ASHRAE 62.1 standards for ventilation and indoor air quality within LEED projects. It outlines the EQp1 and EQc1 credits, describing the ventilation and monitoring requirements for mechanically and naturally ventilated spaces according to ASHRAE 62.1. It provides examples of strategies to meet the Enhanced Indoor Air Quality credit such as increased filtration, natural ventilation calculations, and carbon dioxide monitoring.
Development of a_standard_for_the_use_of_composites_in_a_high_temperature_rea...
Presented to SYMPOSIUM 13: International Symposium on Advanced Ceramics and Composites for Sustainable Nuclear Energy and Fusion Energy
Several high-temperature reactors have been designed, built and operated successfully using conventional materials. This application invariably pushed the materials to the edge of their envelope. Over the last 20 years it has become clear that unlocking the use of advanced materials – such as ceramic matrix composites and carbon-carbon composites – will enable significant improvements in the performance of high-temperature reactors.
This presentation provided an overview of some of the work completed to enable the use of these materials in various reactor development programmes, and explained the current work that is being completed in the ASME Boiler and Pressure Vessel Code committees to establish codes and standards for this application.
The complexities of new source review air permitting – a case study ddix 020116
Dan Dix presented, The Complexities of New Source Review Air Permitting – A Case Study" at the 4C Conference in Austin, TX in February 2016.
Presentation sustainable design for high strength wastewaters
This presentation is aimed at high-strength wastewaters which is herein defined as organic in nature, requiring carbon and nutrient removal to a designated level of quality.
The wastewaters result from raw product/final product/co-product carryover in washwater from production systems. Prime sources are food processing, brewing and distilling, soft drinks, agricultural slurries and run-offs, digestion sideflows, landfill leachates pharma-biopharma wastewaters may now be included in this category.
Points of relevance in assessing high-strength wastewaters:
• Concentrations in a volume may relate to organic carbon, nutrients or both.
• The process evaluation should be biased by relative biodegradability, biochemistry and, where relevant, by Biochemical Methane Potential (BMP).
• Typical high-strength wastewaters may vary from 1,000mg/l COD up to 100,000mg/l COD and the nutrient ratios and treatability require inclusion.
• Readily biodegradable COD as an indicator of reaction rate and enzyme/co-enzyme activity.
• Trend curves relating to inhouse production to emission over the periods and phases of production are an advantage.
• Proper pre-conditioning is necessary for all relative assessments.
• Sustainability analysis may be carried on existing plants after a detailed site/process survey including an energy audit.
• Alternative designs should be considered using comparative carbonation (CF Diligence) analysis to identify the optimum solution.
Certifcation of Building Using GRIHA Rating System
The document is a presentation on the GRIHA rating system for the LT & Academic Complex building at IIT Delhi. It provides details of the building project and outlines the GRIHA criteria used to evaluate the building's sustainable features. It describes aspects like site planning, water and energy management, waste management, and materials used. It indicates the building scored 84 points out of 100 to achieve a 4-star GRIHA rating, recognizing its efforts in optimizing resource use, minimizing ecological impact and incorporating sustainable practices in line with GRIHA standards.
Somasundarreddy2020
The document presents a genetic algorithm tuned PID controller for temperature control in a shell and tube heat exchanger. It models the heat exchanger and develops a GA based PID control scheme to regulate the temperature of the output fluid. Simulation results show that the proposed controller achieves less settling time (65 sec) and peak overshoot (3.22%) compared to a conventional PID controller (74 sec and 3.54% overshoot).
Boiler Modification for SHR & Reliability Improvement SSL (IPP)
This document provides an overview of Sesa Sterlite Ltd's 4x600 MW independent power plant (IPP) located in Jharsuguda, India. The key points are:
1) The IPP has 4 units totaling 4x600 MW capacity supplied by SEPCO-III China. It uses boiler and turbine technology from Harbin and DFPS of China respectively.
2) Modifications were made to the boiler of one unit to improve efficiency and reliability. This involved reducing the surface area of low temperature superheater and reheater zones as well as increasing the economizer surface area.
3) Testing after the modifications showed improved parameters including a reduction in station heat rate of 14
Oct. 24 Webinar/Seminar: Is ASHRAE 90.1 2012 or iecc-2012 the right energy co...
This webinar compared the energy code requirements of ASHRAE 90.1-2010 and IECC-2012 for new facilities. It discussed key differences in requirements for building envelopes, mechanical systems, service water heating, lighting and controls. While 90.1 is typically more stringent, IECC provides less flexibility. Requirements around fenestration, reheat limits, lighting power densities and controls, receptacle controls, and commissioning are particularly impactful. The presentation aimed to help attendees understand both codes and determine the best option for their plan review submittals.
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...UK Carbon Capture and Storage Research Centre
Secarb Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation by Dr Gerald Hill for UKCCSRC seminar, 19 September 2014, EdinburghSO2 Data Requirements Rule Modeling Strategies
Presentation, "SO2 Data Requirements Rule Modeling Strategies" by Mark Wenclawiak and Amanda Essner, prepared for the 96th Annual Meeting of the American Meteorological Society.
Owenton HSE Presentation Greenwood October 2011
The presentation summarized the HSE goals and sustainability initiatives at the Owenton facility. It reported that there was one accident in the first half of 2011. Annual planning requirements for the EHS and OHSMS systems were on track. Sub-metering projects for electricity, water, and gas were completed. The sustainability team achieved a 23% reduction in energy usage from 2010 to 2011 through HVAC replacements and identifying leaks. There were still some open items from the 2011 external audit to address.
Bob Bach: Energy Efficiency in the Ontario Building Code
The document discusses changes to Ontario's building code regarding energy efficiency from 2006 to 2012, including increasing stringency of requirements over time from exceeding the Model National Energy Code for Buildings by 25% in 2012 to aligning with ASHRAE 90.1-2010 plus 5% by 2012. It provides an overview of the supplementary standard SB-10 and software tools available or under development for analyzing building designs under the different compliance options.
Re con
The document describes ReCon, a tool to help PepsiCo optimize water and energy usage. It aims to minimize environmental impact through standardized metrics, benchmarking, best practices sharing, and technical solutions. Key aspects include profiling energy use, diagnosing opportunities, setting priorities via a scorecard, training regional experts, and recognizing high-performing sites. The tool focuses on reducing usage in motors, compressed air, steam systems, and recovering waste heat.
Rapport Vergelijking Mondiale Dubo Methodes
The document compares four major international environmental assessment methods for buildings: BREEAM, LEED, Green Star, and CASBEE. It finds that while the methods have similar goals around sustainability, they differ substantially in their assessment processes, scoring systems, weightings of issues, and third-party verification. The report recommends increased transparency between the methods, developing common metrics for key issues, and facilitating conversations between scheme operators to work towards harmonization where possible. This could allow for dual certification and help multinational companies more easily benchmark buildings across borders.
Australian indoor environment rating tools, and the future of building health...
Presentation to AIRAH 2016 - The Future of HVAC
By Joe Scholz and Mark Graham, QED Environmental Services
Explains the link between indoor environment and productivity of office building occupants, and how this impacts tenants' bottom line.
Compares and contrasts tools for rating indoor environment: NABERS, Green Star Performance and Well Building Standard.
Green building assessment
This document provides a summary of a final presentation for a green building assessment of Butwal Power Company Limited using the CASBEE assessment method. The presentation covers an introduction to green building and CASBEE, a case study of Butwal Power Company, an analysis of its green building features, and a calculation of its BEE value rating. Key features assessed include the building's EAT system, materials used, lighting, and its solar panels with a total capacity of 34kw. The presentation concludes with recommending further improvements to enhance the building's sustainability.
Ccr Program Additions & Modifications 3.9.09
These additions to the CCR program are from a series of meetings with CRI staff to further develop the functional design criteria for the CCR.
CCR Concept Sketches & Budget
This document includes initial rough concept sketches, concept ketches form the animation, University of Texas Graduate Architecture student diagrams from the charrette and early budgeting
More Related Content
What's hot
Commercial Condensing Boiler Optimizaiton
Senior Mechanical Engineer Russ Landry presented his research on Commercial condensing boilers at the 2016 Natural Gas Conservation Convention.
Breeam+vs+leed
This report compares the BREEAM and LEED environmental assessment methods for buildings. BREEAM was launched in 1990 in the UK and focuses on a broader scope of social impacts, while LEED was developed in 2000 in the US. Both methods assess buildings across multiple categories and award credits based on weighted points to determine a rating. Key differences include BREEAM having more credits and categories overall, while LEED categories cover some issues addressed across multiple BREEAM sections. The report concludes there are significant differences in their methodologies and scopes despite common aims, and an alignment effort is ongoing.
R4103111114
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
LEED v4: Life Cycle Assessments & Environmental Product Declarations
Looking to learn about Environmental Product Declarations and Life Cycle Assessment for your next green building project? Poplar Network, the leading green building network and provider of LEED education, is back with another insightful presentation. Gain a deeper understanding of the holistic analysis of a product's environmental impact here!
Applying ashrae 62.1 to LEED
This document discusses how to apply ASHRAE 62.1 standards for ventilation and indoor air quality within LEED projects. It outlines the EQp1 and EQc1 credits, describing the ventilation and monitoring requirements for mechanically and naturally ventilated spaces according to ASHRAE 62.1. It provides examples of strategies to meet the Enhanced Indoor Air Quality credit such as increased filtration, natural ventilation calculations, and carbon dioxide monitoring.
Development of a_standard_for_the_use_of_composites_in_a_high_temperature_rea...
Presented to SYMPOSIUM 13: International Symposium on Advanced Ceramics and Composites for Sustainable Nuclear Energy and Fusion Energy
Several high-temperature reactors have been designed, built and operated successfully using conventional materials. This application invariably pushed the materials to the edge of their envelope. Over the last 20 years it has become clear that unlocking the use of advanced materials – such as ceramic matrix composites and carbon-carbon composites – will enable significant improvements in the performance of high-temperature reactors.
This presentation provided an overview of some of the work completed to enable the use of these materials in various reactor development programmes, and explained the current work that is being completed in the ASME Boiler and Pressure Vessel Code committees to establish codes and standards for this application.
The complexities of new source review air permitting – a case study ddix 020116
Dan Dix presented, The Complexities of New Source Review Air Permitting – A Case Study" at the 4C Conference in Austin, TX in February 2016.
Presentation sustainable design for high strength wastewaters
This presentation is aimed at high-strength wastewaters which is herein defined as organic in nature, requiring carbon and nutrient removal to a designated level of quality.
The wastewaters result from raw product/final product/co-product carryover in washwater from production systems. Prime sources are food processing, brewing and distilling, soft drinks, agricultural slurries and run-offs, digestion sideflows, landfill leachates pharma-biopharma wastewaters may now be included in this category.
Points of relevance in assessing high-strength wastewaters:
• Concentrations in a volume may relate to organic carbon, nutrients or both.
• The process evaluation should be biased by relative biodegradability, biochemistry and, where relevant, by Biochemical Methane Potential (BMP).
• Typical high-strength wastewaters may vary from 1,000mg/l COD up to 100,000mg/l COD and the nutrient ratios and treatability require inclusion.
• Readily biodegradable COD as an indicator of reaction rate and enzyme/co-enzyme activity.
• Trend curves relating to inhouse production to emission over the periods and phases of production are an advantage.
• Proper pre-conditioning is necessary for all relative assessments.
• Sustainability analysis may be carried on existing plants after a detailed site/process survey including an energy audit.
• Alternative designs should be considered using comparative carbonation (CF Diligence) analysis to identify the optimum solution.
Certifcation of Building Using GRIHA Rating System
The document is a presentation on the GRIHA rating system for the LT & Academic Complex building at IIT Delhi. It provides details of the building project and outlines the GRIHA criteria used to evaluate the building's sustainable features. It describes aspects like site planning, water and energy management, waste management, and materials used. It indicates the building scored 84 points out of 100 to achieve a 4-star GRIHA rating, recognizing its efforts in optimizing resource use, minimizing ecological impact and incorporating sustainable practices in line with GRIHA standards.
Somasundarreddy2020
The document presents a genetic algorithm tuned PID controller for temperature control in a shell and tube heat exchanger. It models the heat exchanger and develops a GA based PID control scheme to regulate the temperature of the output fluid. Simulation results show that the proposed controller achieves less settling time (65 sec) and peak overshoot (3.22%) compared to a conventional PID controller (74 sec and 3.54% overshoot).
Boiler Modification for SHR & Reliability Improvement SSL (IPP)
This document provides an overview of Sesa Sterlite Ltd's 4x600 MW independent power plant (IPP) located in Jharsuguda, India. The key points are:
1) The IPP has 4 units totaling 4x600 MW capacity supplied by SEPCO-III China. It uses boiler and turbine technology from Harbin and DFPS of China respectively.
2) Modifications were made to the boiler of one unit to improve efficiency and reliability. This involved reducing the surface area of low temperature superheater and reheater zones as well as increasing the economizer surface area.
3) Testing after the modifications showed improved parameters including a reduction in station heat rate of 14
Oct. 24 Webinar/Seminar: Is ASHRAE 90.1 2012 or iecc-2012 the right energy co...
This webinar compared the energy code requirements of ASHRAE 90.1-2010 and IECC-2012 for new facilities. It discussed key differences in requirements for building envelopes, mechanical systems, service water heating, lighting and controls. While 90.1 is typically more stringent, IECC provides less flexibility. Requirements around fenestration, reheat limits, lighting power densities and controls, receptacle controls, and commissioning are particularly impactful. The presentation aimed to help attendees understand both codes and determine the best option for their plan review submittals.
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...UK Carbon Capture and Storage Research Centre
Secarb Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation by Dr Gerald Hill for UKCCSRC seminar, 19 September 2014, EdinburghSO2 Data Requirements Rule Modeling Strategies
Presentation, "SO2 Data Requirements Rule Modeling Strategies" by Mark Wenclawiak and Amanda Essner, prepared for the 96th Annual Meeting of the American Meteorological Society.
Owenton HSE Presentation Greenwood October 2011
The presentation summarized the HSE goals and sustainability initiatives at the Owenton facility. It reported that there was one accident in the first half of 2011. Annual planning requirements for the EHS and OHSMS systems were on track. Sub-metering projects for electricity, water, and gas were completed. The sustainability team achieved a 23% reduction in energy usage from 2010 to 2011 through HVAC replacements and identifying leaks. There were still some open items from the 2011 external audit to address.
Bob Bach: Energy Efficiency in the Ontario Building Code
The document discusses changes to Ontario's building code regarding energy efficiency from 2006 to 2012, including increasing stringency of requirements over time from exceeding the Model National Energy Code for Buildings by 25% in 2012 to aligning with ASHRAE 90.1-2010 plus 5% by 2012. It provides an overview of the supplementary standard SB-10 and software tools available or under development for analyzing building designs under the different compliance options.
Re con
The document describes ReCon, a tool to help PepsiCo optimize water and energy usage. It aims to minimize environmental impact through standardized metrics, benchmarking, best practices sharing, and technical solutions. Key aspects include profiling energy use, diagnosing opportunities, setting priorities via a scorecard, training regional experts, and recognizing high-performing sites. The tool focuses on reducing usage in motors, compressed air, steam systems, and recovering waste heat.
Rapport Vergelijking Mondiale Dubo Methodes
The document compares four major international environmental assessment methods for buildings: BREEAM, LEED, Green Star, and CASBEE. It finds that while the methods have similar goals around sustainability, they differ substantially in their assessment processes, scoring systems, weightings of issues, and third-party verification. The report recommends increased transparency between the methods, developing common metrics for key issues, and facilitating conversations between scheme operators to work towards harmonization where possible. This could allow for dual certification and help multinational companies more easily benchmark buildings across borders.
Australian indoor environment rating tools, and the future of building health...
Presentation to AIRAH 2016 - The Future of HVAC
By Joe Scholz and Mark Graham, QED Environmental Services
Explains the link between indoor environment and productivity of office building occupants, and how this impacts tenants' bottom line.
Compares and contrasts tools for rating indoor environment: NABERS, Green Star Performance and Well Building Standard.
Green building assessment
This document provides a summary of a final presentation for a green building assessment of Butwal Power Company Limited using the CASBEE assessment method. The presentation covers an introduction to green building and CASBEE, a case study of Butwal Power Company, an analysis of its green building features, and a calculation of its BEE value rating. Key features assessed include the building's EAT system, materials used, lighting, and its solar panels with a total capacity of 34kw. The presentation concludes with recommending further improvements to enhance the building's sustainability.
What's hot (20)
LEED v4: Life Cycle Assessments & Environmental Product Declarations
LEED v4: Life Cycle Assessments & Environmental Product Declarations
Development of a_standard_for_the_use_of_composites_in_a_high_temperature_rea...
Development of a_standard_for_the_use_of_composites_in_a_high_temperature_rea...
The complexities of new source review air permitting – a case study ddix 020116
The complexities of new source review air permitting – a case study ddix 020116
Presentation sustainable design for high strength wastewaters
Presentation sustainable design for high strength wastewaters
Certifcation of Building Using GRIHA Rating System
Certifcation of Building Using GRIHA Rating System
Boiler Modification for SHR & Reliability Improvement SSL (IPP)
Boiler Modification for SHR & Reliability Improvement SSL (IPP)
Oct. 24 Webinar/Seminar: Is ASHRAE 90.1 2012 or iecc-2012 the right energy co...
Oct. 24 Webinar/Seminar: Is ASHRAE 90.1 2012 or iecc-2012 the right energy co...
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...
SECARB Plant Barry CCS Project: Sharing Knowledge & Learning - Presentation b...
Bob Bach: Energy Efficiency in the Ontario Building Code
Bob Bach: Energy Efficiency in the Ontario Building Code
Australian indoor environment rating tools, and the future of building health...
Australian indoor environment rating tools, and the future of building health...
Viewers also liked
Ccr Program Additions & Modifications 3.9.09
These additions to the CCR program are from a series of meetings with CRI staff to further develop the functional design criteria for the CCR.
CCR Concept Sketches & Budget
This document includes initial rough concept sketches, concept ketches form the animation, University of Texas Graduate Architecture student diagrams from the charrette and early budgeting
Eecs Plan Framework Document
This document provides a framework for the City of Shreveport, Louisiana's Comprehensive Energy Efficiency and Conservation Plan (CEECP). The CEECP will build upon initial investments from the Energy Efficiency and Conservation Strategy to develop a long-term strategy for making Shreveport more energy efficient. It will implement a strategic doing process to empower citizens and align resources around innovation to create jobs, save energy, reduce emissions, and improve quality of life. The CEECP will balance environmental, economic, social, and cultural priorities to maximize benefits according to a quadruple bottom line. It will identify and support local assets through an open network model and fast cycles of strategic doing to guide progress and innovation.
Ccr sustainable building technologies draft 7.3.10
The document outlines strategies for the Center for Community Renewal (CCR) to achieve high levels of energy efficiency and conservation. It aims to reduce the CCR's energy consumption by 70% compared to a baseline building through strategies like geothermal heating/cooling, solar panels, wind turbines, and more. The CCR also aims to produce more energy annually than it consumes, becoming net-zero or better. Technologies proposed include solar, wind, a fuel cell, and smart grid integration. The goals are for the CCR to serve as a model and laboratory for sustainable building practices.
Shreveport Louisiana Retrofit Narrative
The City of Shreveport is requesting $75 million in federal funds to accelerate energy efficiency and renewable energy projects. The funds would be used to retrofit over 78,000 homes and 2,120 public buildings, creating nearly 5,000 jobs. Partner organizations would help implement the program across Louisiana to reduce energy use by 20% and serve as a model for other communities. The goals are to cut costs and emissions through retrofits, train workers, and stimulate the local economy.
Full Eecs Report Draft 11 05 2009
This document is the 1.3 version of the EECS and CEEC Plan Framework for Shreveport. This version is dated 11.05.09
Presentation To National Advisory
This powerpoint slide presentation was presented to the CRI National Advisory on 2.3.10 to show the progress of the project thru phase 1 and the status of design in phase 2 of 4 phases
Viewers also liked (7)
Ccr sustainable building technologies draft 7.3.10
Ccr sustainable building technologies draft 7.3.10
Similar to Leed Modeling
Preparing for LEED 2009
The document summarizes changes being made to the LEED green building certification system for 2009. Key changes include increased emphasis on energy efficiency and renewables, addition of regional priority credits, restructuring of certain credits and categories, and alignment of standards to latest versions. The timeline for transitioning to the new LEED 2009 system and credentialing programs is also outlined.
Sustainability In Steel Construction
The document discusses sustainability issues related to steel construction. It covers sustainability and LEED standards, sustainable steel construction methods, and an application using intermodal freight shipping containers (IFSCs) for construction. Specifically, it outlines the LEED rating system categories and credits, advantages of steel such as recyclability and embodied energy, the use of cold-formed steel and its benefits, and examples of IFSCs being used to create houses and a hotel.
ASHRAE Standard 100
Original presentation by Glenn Friedman and presented to the Illinois Chapter of ASHRAE at the May 10 monthly meeting by Michael Kuk of Sieben Energy Associates.
Ashrae Sustainability The Road To Net Zero Gcg
The document discusses ASHRAE's goals and initiatives around sustainability and net zero energy buildings. It outlines ASHRAE's roadmap to develop tools enabling net zero energy buildings by 2030 through standards like 90.1 and 189.1. It also discusses opportunities in existing buildings, which represent most buildings that will exist in 2030 and offer the greatest potential for reduced energy use through retrofits.
An introduction to EECO2-Energy Efficiency Consultancy Limited
EECO2 is an energy efficiency consultancy that offers services to reduce HVAC energy costs in the pharmaceutical and life sciences industries. They have over 100 combined years of experience in design, construction, and operation of technical facilities. Their approach involves identifying opportunities to reduce air changes and optimize HVAC systems through workshops with clients. Case studies show they have helped clients in multiple countries reduce energy costs by 10-45% while maintaining product quality standards.
EECO2 GMP critical HVAC energy cost reduction
EECO2 is an energy efficiency consultancy that offers services to reduce HVAC energy costs in the pharmaceutical and life sciences industries. They have over 100 combined years of experience in design, construction, and operation of technical facilities. Their approach involves identifying opportunities to reduce air changes and optimize existing systems to lower energy use without compromising product quality. Case studies demonstrate they have helped clients achieve 15-30% savings through measures like reduced air flows, improved controls, and non-operational setbacks.
Breeam 2011 Presentation 2011 06 Jun 29
The document summarizes changes in the 2011 update of the BREEAM sustainability assessment method. Key changes include consolidating assessment issues into one manual, setting minimum standards, expanding water and energy criteria, accounting for life cycle impacts, and strengthening sustainable procurement requirements through construction and aftercare. The update aims to continually improve BREEAM's ability to measure core environmental issues and impacts.
Leed v4-view-from-mep-seats-140429
Overview of LEED NC v4 credits and changes from v2009 with particular emphasis on those credits related to Mechanical, Electrical, and Commissioning as presented by a USGBC Designated v4 Liaison.
Options for Retrofit Regulations at Time of Renovation
Presented by Andrew Pape-Salmon at the 2016 Pathways to Net-Zero Buildings, hosted by Pembina Institute.
LEED 2009 Rating System and Credentials Overview
This presentation gives a brief overview of the Rating System and Credentialing changes associated with LEED 2009.
Energy Efficiency Ontario Building Code - Bob Bach - 2012
The document summarizes changes to Ontario's Building Code regarding energy efficiency from 2006 to 2012 and beyond. Key points include:
- The 2006 code set energy efficiency requirements for houses and buildings, which increased over time.
- The 2012 code required houses to meet EnerGuide 80 and large buildings to exceed the Model National Energy Code for Buildings by 25%.
- Supplementary Standard SB-10 provided the technical requirements to meet the energy codes and included options like ASHRAE 90.1-2010.
- Modeling showed the 2012 code would reduce energy utilization intensity in buildings by an additional 7% compared to the 2006 code.
- Future updates may be influenced by programs like Toronto's Green Standard that incentivize
High Performance Green Design for High-Precision Manufacturing
The document discusses the sustainable building design of a new 36,000 square foot manufacturing facility in Swanzey, NH for Moore Nanotechnology Systems. It outlines the company's commitment to sustainability and describes the integrated design approach used, which included reducing energy consumption through an optimized building envelope and efficient mechanical systems. Key strategies involved meeting Advanced Buildings Core Performance guidelines to achieve energy savings of up to 30% beyond code requirements.
Benchmark cCstomer Day 22nd September 2010 - Building Regs Presentation
The document summarizes the UK's Non-Domestic Building Regulations Part L2A and L2B from 2010. Key points include:
- Regulations were updated in 2010 to require a 25% reduction in CO2 emissions for new buildings and improved energy efficiency standards for refurbishments.
- Compliance involves meeting targets for fabric performance, limits on thermal bridging and air leakage, and summer overheating.
- Notional buildings were introduced as baseline specifications to demonstrate compliance. Wall and roof insulation thickness increased significantly.
- Regulations differ slightly between England/Wales and Scotland but generally drive higher performance standards across new builds, extensions and refurbishments.
- The changes mark significant progress toward
Rising To The Challenge: Toward Carbon Neutral Buildings
Presentation given at the 2009 Eco El Paso Conference. Presentation includes building blocks for carbon neutral design and a few case studies. A good primer for the 2030 Challenge.
Energy and Indoor Air Quality Impacts of DOAS Retrofits in Small Commercial B...
Energy and Indoor Air Quality Impacts of DOAS Retrofits in Small Commercial B...RDH Building Science
Heating, ventilating and air-conditioning (HVAC) typically accounts for 30% to 50% of commercial building energy use. Small commercial buildings often use oversized and inefficient rooftop air handling units (RTUs) to provide both air conditioning and ventilation. A conversion strategy to reduce energy
consumption is the installation of a very high efficiency dedicated outdoor air system (DOAS) to provide ventilation with a separate heat pump system to provide heating and cooling. Decoupling the heating and cooling from ventilation allows for improved energy efficiency and control of space conditions. Upgrades to mechanical systems can also improve the indoor air quality (IAQ) and comfort through control of carbon dioxide (CO2) concentrations, dry bulb temperature, and relative humidity (RH).
A pilot study of eight buildings was conducted to investigate the potential benefits of replacing existing RTUs with high efficiency heat recovery ventilators (HRVs) and air source heat pumps in the Pacific Northwest. This report contains results for a subset of seven buildings for which data is available. The
building energy use before and after the conversion was determined using utility data, energy modeling and monitoring. Indoor environmental conditions were measured at hourly intervals for up to one year postconversion using CO2, temperature, and RH sensors. The data was analyzed to determine changes in energy use and IAQ before and after the conversion.
This paper presents the pilot building results pre- and post-conversion. While several factors need to be in place to ensure optimal performance and cost effectiveness, the pilot shows that replacing RTUs with DOAS systems in existing commercial buildings can both reduce energy use as well as improve indoor environmental conditions. This conversion type is viable for a wide variety of building types and scale-up of the retrofits has the potential to significantly improve a previously underserved segment of the building stock.
Presented by James Montgomery at the 15th Canadian Conference on Building Science and Technology.Code Dread: Keeping up with ASHRAE and LEED
Design firms will be in the best position to meet their clients’ needs by understanding and preparing for ASHRAE 90.1-2010 and LEED v4, both of which have evolved from their earlier versions and will have major impacts on buildings in the very near future.
This presentation will illustrate the effect of these changes by applying the new standards to an existing LEED Silver-certified project constructed in 2008 by KJWW Engineering Consultants using ASHRAE 90.1-2004.
First, a new baseline using the ASHRAE 90.1-2007 standard will be applied to the project, which is the requirement under LEED v2009. Next, a baseline for the project using ASHRAE 90.1-2010 will be applied to the project, which represents the requirements under LEED v4. Both comparisons will show the decrease in energy savings, points awarded, and strategies and cost required to bring the project back to the original energy savings and the LEED certification it might attain.
The project’s real-life, existing energy performance will be presented as an overlay to all of the comparisons.
LEED-EB Presentation
The following presentation serves as an informative tools to help educate people on sustainability and LEED Exisiting Building/Operations & Maintenance projects
LEED-EB O&M Basics
A basic overview and introduction to LEED-EB O&M, this is a presentation that OTJ can give to your organization so that you can better understand what is involved in bringing your building, or your portfolio, into the new "green age".
A practical approach to pharmaceutical HVAC energy reduction
This document outlines strategies for reducing energy use in pharmaceutical HVAC systems. It identifies common areas with high energy savings potential, such as reducing air change rates and implementing night/weekend setbacks. Barriers to energy reduction like lack of funding and QA approval are discussed. The presentation recommends hosting team-based "energy kaizens" to identify opportunities and gain stakeholder buy-in. Case studies show projects at pharmaceutical plants that cut HVAC energy use up to 66% by optimizing air flow and implementing variable speed controls.
Paul Hamilton, Schneider Electric: Lean and Clean: Equipping Modern Manufactu...
On Friday, March 19, Alliance staff and industry experts discussed energy efficiency's role in reducing greenhouse gas emissions in the industrial sector.
Similar to Leed Modeling (20)
An introduction to EECO2-Energy Efficiency Consultancy Limited
An introduction to EECO2-Energy Efficiency Consultancy Limited
Options for Retrofit Regulations at Time of Renovation
Options for Retrofit Regulations at Time of Renovation
Energy Efficiency Ontario Building Code - Bob Bach - 2012
Energy Efficiency Ontario Building Code - Bob Bach - 2012
High Performance Green Design for High-Precision Manufacturing
High Performance Green Design for High-Precision Manufacturing
Benchmark cCstomer Day 22nd September 2010 - Building Regs Presentation
Benchmark cCstomer Day 22nd September 2010 - Building Regs Presentation
Rising To The Challenge: Toward Carbon Neutral Buildings
Rising To The Challenge: Toward Carbon Neutral Buildings
Energy and Indoor Air Quality Impacts of DOAS Retrofits in Small Commercial B...
Energy and Indoor Air Quality Impacts of DOAS Retrofits in Small Commercial B...
A practical approach to pharmaceutical HVAC energy reduction
A practical approach to pharmaceutical HVAC energy reduction
Paul Hamilton, Schneider Electric: Lean and Clean: Equipping Modern Manufactu...
Paul Hamilton, Schneider Electric: Lean and Clean: Equipping Modern Manufactu...
More from Kim Mitchell
Intertech masterplan presentation.pdf
This document describes plans for the development of InterTech Science Park in Shreveport, Louisiana over a 25-year period. It outlines the following:
- Location of InterTech and surrounding neighborhoods in Shreveport.
- Existing infrastructure like hospitals and proposed phased development of the 200-acre site focused initially on a technology center plaza and village.
- Plans for transportation improvements including bus routes and potential light rail.
- Proposed land uses including technology commercial clusters, mixed-use, and residential development.
- Conceptual streetscape designs and drainage/detention plans to support compact, mixed-use development.
- A phased 10-year development strategy and potential mixed
Village framework comparison
Understanding community as a complex living adaptive whole system influenced by the nature of the relational foundation from which community emerges as a whole system that is connected (virtuous) or disconnected (vicious)
Intertech Science Park Master Plan overview
This document discusses plans to develop InterTech Science Park in Shreveport, Louisiana. It provides details on:
1) The location of InterTech and nearby transportation infrastructure like highways, airports, and rail lines that provide access.
2) Conceptual plans for the phased development of InterTech over 25 years, including types of facilities to be built, estimated economic impacts, and strategies for different development phases.
3) Guiding development principles like creating a campus environment, mixing uses, and alternative transportation options to make InterTech a walkable community.
Team structure diagram
The document outlines a community renewal plan with two main components. The Community Renewal Office will assess needs, organize programs, recruit and train volunteers, fund initiatives, and support coordination across programs. The plan also establishes Friendship Houses and Haven Houses in concentrated disadvantaged neighborhoods to build trust and deliver local services. Friendship Houses will be located every 30 blocks and led by community coordinators to serve as neighborhood role models. Haven Houses will appoint block leaders across the city to encourage collaboration around safety and health.
Volunteer participation diagram
Chart showing growth in numbers of volunteers, annual volunteer hours and staff (paid workforce placing caring in a system)
Tactics and technology diagram
willing people relationally filtered through engagement in the CRI model to form a community-wide caring network as the relational foundation of community
Replication timeline concept diagram
Haven House and Friendship House will be staffed by paid coordinators and volunteers to help the local community. An administrative support person and renewal team of 2 will also provide assistance. Initially, 3 full time paid staff and volunteers will launch Haven House over 5 years as the community is educated, an organization is formed, advisors are selected, and staff and volunteers are trained. The caring network of Haven House, Friendship House, and the Renewal Team will provide sustained community funding after the first 5 years as the model is replicated in other areas.
Evidence effectivess diagram. feedback loops
This document outlines a framework for building an ever-renewing community. It focuses on establishing an adequate housing, meaningful work, and health systems while forming a strong relational foundation of trust, caring, and mutually enhancing relationships. This relational foundation is meant to act as a filter for feedback loops and decision making through community organizations like a Renewal Team.
Cri organization diagram
The document outlines the programs and partnerships of an organization called CRI that is helping people find meaning and community. It lists various monthly activities, training programs, houses, teams, and partnerships CRI has with other organizations, businesses, schools, and individuals to create a system of caring in the community.
Cri opportunities fund diagram
The CRI Opportunities Fund Strategy outlines a plan to reduce poverty in Shawnee, Oklahoma over time through local investment and outside funding. It projects that with high initial seed investment and 50% matching funds, they could operate with 15 paid staff and over 1,000 volunteers by year 5, establish 8 friendship houses, and engage 12,000 people through a "We Care" team. The strategy focuses on accelerating a shift to more local investing to influence positive change in the community.
Bastrop la. zoning ordinance combined files
This document outlines the organization and components of the City of Bastrop's zoning development code. It establishes four context areas - suburban, urban, center, and special - that set standards for appropriate development. Zoning districts are then applied within each context area to further refine development patterns. Building types are also defined that explain how buildings relate to lots, streets, and the public realm. The zoning map officially designates the context areas and zoning districts for the city.
Final report 6.2.08
This inaugural Community Renewal International Think Tank brought together leaders in transformative work related to the eight elements of CRI's community model. Over two intense days, participants shared their work, identified connections between efforts, and explored partnerships. They also began outlining design principles to shape environments supporting CRI's work in building caring relationships. Initial agreements were made to connect various initiatives and formalize collaboration between CRI, I-Open, and academic partners. The Think Tank proved an effective method for refining CRI's model and expanding its network of relationships.
Shreveport's Historic Music Village Comprehensive Plan
This is a 2006 slide presentation of Shreveport's Historic Music Village Plan to the New Media Consortium national conference. The comprehensive plan for the historic area around Shreveport's Municipal Auditorium, Home of the Louisiana Hayride, was recognized by the Louisiana American Planning Association with their Best Plan Award.
Highways to Boulevards Charrette handout 9.3.2013
this is a handout that will be used for a charrette to explore alternatives to elevated inner-city limited-access expressways
InterTech Technology Park
This slide presentation was used to present the InterTech Technology Park plan to the Louisiana American Planning Association and to the Association of University Research Parks. The plan received the "Best Plan Award" from the Louisiana APA in 2002.
AllendaleOne Plan Presentation
This presentation was made to the Shreveport City Council in 2007 at the conclusion of the planning process. The framework for the plan is based on the "village structure" eight elements that are part of the Community Renewal International theory of change.
More from Kim Mitchell (20)
Shreveport's Historic Music Village Comprehensive Plan
Shreveport's Historic Music Village Comprehensive Plan
Recently uploaded
Value based approach to heritae conservation -.docx
Text defines the role, importance and relevance of value based approach in identification, preservation and conservation of heritage to make it more productive and community centric.
The Power to Battle! Slideshow by: Kal-el
This presentation is all about how you can open your "new-loving" battle.
一比一原版(ucb毕业证书)英国伯明翰大学学院毕业证如何办理
原版一模一样【微信：741003700 】【(ucb毕业证书)英国伯明翰大学学院毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(ucb毕业证书)英国伯明翰大学学院毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(ucb毕业证书)英国伯明翰大学学院毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(ucb毕业证书)英国伯明翰大学学院毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(ucb毕业证书)英国伯明翰大学学院毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(LSE毕业证书)伦敦政治经济学院毕业证如何办理
原件一模一样【微信：WP101A】【(LSE毕业证书)伦敦政治经济学院毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(LSE毕业证书)伦敦政治经济学院毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSE毕业证书)伦敦政治经济学院毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSE毕业证书)伦敦政治经济学院毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSE毕业证书)伦敦政治经济学院毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版澳洲莫纳什大学毕业证（Monash学位证）如何办理
原件一模一样【微信：WP101A】【澳洲莫纳什大学毕业证（Monash学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理澳洲莫纳什大学毕业证（Monash学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理澳洲莫纳什大学毕业证（Monash学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理澳洲莫纳什大学毕业证（Monash学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理澳洲莫纳什大学毕业证（Monash学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(UW毕业证书)华盛顿大学毕业证如何办理
原件一模一样【微信：WP101A】【(UW毕业证书)华盛顿大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(UW毕业证书)华盛顿大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(UW毕业证书)华盛顿大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(UW毕业证书)华盛顿大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(UW毕业证书)华盛顿大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Plastic Molding Infographic - RPWORLD.pdf
RPWORLD offers custom injection molding service to help customers develop products ramping up from prototypeing to end-use production. We can deliver your on-demand parts in as fast as 7 days.
欧洲杯足彩-欧洲杯足彩比赛投注-欧洲杯足彩比赛投注官网|【网址🎉ac10.net🎉】
【网址🎉ac10.net🎉】欧洲杯足彩是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯足彩是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯足彩，旗下2800家投注站遍布全英国。
一比一原版(NU毕业证书)诺森比亚大学毕业证如何办理
原件一模一样【微信：WP101A】【(NU毕业证书)诺森比亚大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
World trade center in kerala proposal- AR. DEEKSHITH MAROLI 724519251008 REPORT
World trade center live proposal in kerala.
Future of our nation is looking towards kerala..?
Yes, because the biggest sludge less port is going to open in kerala soon and also about the hidden massing growth of tourism, it , business sector
一比一原版(UC毕业证书)堪培拉大学毕业证如何办理
原件一模一样【微信：WP101A】【(UC毕业证书)堪培拉大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(UC毕业证书)堪培拉大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(UC毕业证书)堪培拉大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(UC毕业证书)堪培拉大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(UC毕业证书)堪培拉大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证如何办理
原版一模一样【微信：741003700 】【(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(ututaustin毕业证书)美国德克萨斯大学奥斯汀分校毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（CSUEB毕业证）美国加州州立大学东湾分校毕业证如何办理
原件一模一样【微信：WP101A】【（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯买球是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯买球。欧洲杯买球现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版(Deakin毕业证书)澳洲迪肯大学毕业证文凭如何办理
原件一模一样【微信：WP101A】【(Deakin毕业证书)迪肯大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（UCB毕业证）英国伯明翰大学学院毕业证如何办理
原件一模一样【微信：WP101A】【（UCB毕业证）英国伯明翰大学学院毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（UCB毕业证）英国伯明翰大学学院毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（UCB毕业证）英国伯明翰大学学院毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（UCB毕业证）英国伯明翰大学学院毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（UCB毕业证）英国伯明翰大学学院毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey ...
"Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey Toward Sustainability"
The booklet of my master’s thesis at the Department of Architecture and Civil Engineering at Chalmers University of Technology. (Gothenburg, Sweden)
This thesis explores the transformation of the vacated (2023) IKEA store in Kållered, Sweden, into a "Reuse Hub" addressing various user types. The project aims to create a model for circular and sustainable economic practices that promote resource efficiency, waste reduction, and a shift in societal overconsumption patterns.
Reuse, though crucial in the circular economy, is one of the least studied areas. Most materials with reuse potential, especially in the construction sector, are recycled (downcycled), causing a greater loss of resources and energy. My project addresses barriers to reuse, such as difficult access to materials, storage, and logistics issues.
Aims:
• Enhancing Access to Reclaimed Materials: Creating a hub for reclaimed construction materials for both institutional and individual needs.
• Promoting Circular Economy: Showcasing the potential and variety of reusable materials and how they can drive a circular economy.
• Fostering Community Engagement: Developing spaces for social interaction around reuse-focused stores and workshops.
• Raising Awareness: Transforming a former consumerist symbol into a center for circular practices.
Highlights:
• The project emphasizes cross-sector collaboration with producers and wholesalers to repurpose surplus materials before they enter the recycling phase.
• This project can serve as a prototype for reusing many idle commercial buildings in different scales and sizes.
• The findings indicate that transforming large vacant properties can support sustainable practices and present an economically attractive business model with high social returns at the same time.
• It highlights the potential of how sustainable practices in the construction sector can drive societal change.
一比一原版南安普顿索伦特大学毕业证Southampton成绩单一模一样
原件一模一样【微信：6496090】【南安普顿索伦特大学毕业证Southampton学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版澳洲科廷科技大学毕业证（Curtin毕业证）如何办理
原件一模一样【微信：WP101A】【澳洲科廷科技大学毕业证（Curtin毕业证）学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理澳洲科廷科技大学毕业证（Curtin毕业证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理澳洲科廷科技大学毕业证（Curtin毕业证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理澳洲科廷科技大学毕业证（Curtin毕业证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理澳洲科廷科技大学毕业证（Curtin毕业证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
Value based approach to heritae conservation -.docx
Value based approach to heritae conservation -.docx
World trade center in kerala proposal- AR. DEEKSHITH MAROLI 724519251008 REPORT
World trade center in kerala proposal- AR. DEEKSHITH MAROLI 724519251008 REPORT
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey ...
Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey ...
Leed Modeling
- 1. LEED 2009 Modeling and Energy Savings Certification Changes
- 2. LEED 2009 Credit Weighting LEED Credit Weighting Tool Impact Category x Activity Group x Association = Credit Weight
- 14. Timeline
- 16. LEED 2009 Modeling and Energy Savings Prerequisite Update
- 28. LEED 2009 Modeling and Energy Savings ASHRAE Standard 90.1-2007 Major Addenda
- 38. EA Credit Redistribution 100 69 Rating system total 35.0% 35 24.6% 17 EA Section 2.0% 2 1.4% 1 Green Power 6 3.0% 3 1.4% 1 Measurement and verification 5 2.0% 2 1.4% 1 Enhanced Refrigerant Management 4 2.0% 2 1.4% 1 Enhanced Commissioning 3 7.0% 7 4.3% 3 On-site renewable energy 2 19.0% 19 14.5% 10 Optimize Energy Performance 1 Max % Maximum points Max % Maximum points LEED 2009 LEED NC Description Credit
- 39. Minor Changes, EAc3, 4, 6 (with the exception of credit points available) All purchases of green power shall be based on the quantity of energy consumed, not the cost Green Power No changes Enhanced Refrigerant Management No changes Enhanced Commissioning
- 48. Lighting Power Density Comparison 1.3 Including display lighting 1.5 Plus display lighting Retail 1.6 Including decorative lighting 1.6 Up to 1.0 additional decorative Family Dining Core Performance Guide (W/ft 2 ) 90.1-2007 (W/ft 2 ) Building Type
- 49. Examples Core Performance Guide Mechanical Efficiency 0.55 kW/ton 0.400 IPLV 0.576 kW/ton 0.549 IPLV (as of 1/1/2010) 0.590 kW/ton 0.400 IPLV >600 tons Variable Speed centrifugal chiller 0.550 kW/ton 0.510 IPLV 0.576 kW/ton 0.549 IPLV (as of 1/1/2010) 0.570 kW/ton 0.539 IPLV >600 tons Constant Speed centrifugal chiller 1.2 kW/ton 1.0 IPLV 1.26 kW/ton 1.15 IPLV All Air-cooled chiller 10.5 EER 10.9 IPLV 10.0 EER 9.7 IPLV 20 tons Rooftop CPG 90.1-2007 Size Category
- 51. EAC1 – Modeling Up to 19 points 19 44% 48% 18 42% 46% 17 40% 44% 16 38% 42% 15 36% 40% 14 34% 38% 13 32% 36% 12 30% 34% 11 28% 32% 10 26% 30% 9 24% 28% 8 22% 26% 7 20% 24% 6 18% 22% 5 16% 20% 4 14% 18% 3 12% 16% 2 10% 14% 1 8% 12% Points Existing Building Renovations New Buildings
- 55. LEED 2009 Modeling and Energy Savings ASHRAE Standard 62.1-2007 Major Addenda
- 60. Significant EQ Changes 2.0% 2 2.9% 2 Thermal Comfort 7.1-7.2 2.0% 2 2.9% 2 Controllability of Systems 6.1-6.2 100 69 Rating System Total 15.0% 15 21.7% 15 EQ Section 2.0% 2 2.9% 2 Daylight & Views 8.1-8.2 1.0% 1 1.45% 1 Indoor Chemical & Pollutant Source Control 5 4.0% 4 5.8% 4 Low-Emitting Materials 4.1-4.4 2.0% 2 2.9% 2 Construction IAQ Manage. Plan 3.1–3.2 1.0% 1 1.45% 1 Increased Ventilation 2 1.0% 1 1.45% 1 Outdoor Air Delivery Monitor. 1 Max % Maximum credits Max % Maximum credits LEED 2009 LEED NC 2.2 Description Credit
- 62. Significant WE Changes 4.0% 4 N/A 40% Reduction 3.3 3.0% 3 2.9% 2 30% now 35% Reduction 3.2 100 69 Rating System Total 10.0% 10 7.2% 5 WE Section 2.0% 2 1.45% 1 20% now 30% Reduction 3.1 2 to 4 1 to 2 Water Use Reduction 3 2.0% 2 1.45% 1 Innovative Wastewater Technologies 2 2.0% 2 1.45% 1 Water Efficient Landscaping, No Potable Use or No Irrigation 1.2 2.0% 2 1.45% 1 Water Efficient Landscaping, Reduce by 50% 1.1 Max % Maximum credits Max % Maximum credits LEED 2009 LEED NC 2.2 Description Credit
- 64. LEED 2009 Modeling and Energy Savings EAc1 Modeling: Option 1 – Whole Building Energy Simulation
- 66. LEED Sections and Points (NC 2009) Innovation & Design Total Available Points Regional Priority Indoor Environ. Quality Materials and Resources Energy and Atmosphere Water Efficiency Sustainable Sites Design Category Possible Points Blue indicates categories TRACE can be used with and the total possible points that can be obtained 6 110 4 15 14 35 10 26 40 1 31 8
- 67. Full Year, 8,760 Hour Analysis
- 68. Full Year, 8,760 Hour Analysis
- 71. Automatic Features for LEED
- 72. Daylighting
- 74. Thermal Storage
- 76. LEED 2009 Modeling and Energy Savings Segue
- 84. New System Categories & Types
- 85. Humidity Control? UFAD, Chilled Beams, DV…
- 86. Energy Saving Strategies for LEED - ENL