This document provides an overview of sedimentary rock formation processes including weathering, erosion, transportation, deposition, and diagenesis. It discusses various types of weathering mechanisms and factors that influence weathering. Various sedimentary environments are also described such as fluvial, lacustrine, paludal, glacial, and desert. Specific sedimentary structures and deposits associated with different environments are outlined.
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
Texture of Ore Minerals; Importance of Studying Textures; Individual Grains Properties; Filling of voids; Texture Types; Genetically differentiated between Texture types; Secondary textures from replacement; Hypogene Texture; Supergene Texture; Primary texture formed from Melts; Primary texture of open-space deposition; Secondary textures from cooling; Secondary textures from deformation; TEXTURES OF ECONOMIC ORE DEPOSITS; Textures of Magmatic ores; Cumulus textures; Intergranular or intercumulus textures; Exsolution textures; Textures of hydrothermal ore deposits and skarns; Replacement textures; Open space filling textures; Textures characteristic of surfacial or near surface environments and processes; Criteria for identifying replacement textures; Vein and Veining have different Nature Features
CLASSIFICATION OF ORE DEPOSITS
The Mixture of ore minerals are gangue minerals form an Ore deposit. The ore
deposits are generally found enclosed within the country rocks. The ore deposits
are formed in many different ways. Depending upon the process that may
operate to produce them, the ore deposits may be classified as follow:
Magmatic ore deposits.
Sublimation ore deposits.
Pegmatitic ore deposits.
Contact metasomatic ore deposits.
Hydrothermal ore deposits
Cavity filling deposits.
Replacement deposits.
Sedimentation ore deposits.
Evaporation ore deposits.
Residual and mechanical concentration deposits
Metamorphic ore deposits.
MAGMATIC ORE DEPOSITS:
The magmatic ore deposits are the magmatic products which crystallize from
magmas. The magmatic ore deposits are classified as follows:
o Early magmatic deposits
o Late magmatic deposits
Early magmatic deposits:
Early magmatic deposits are formed during the
early stage of the magmatic period. In this case the
ore minerals crystallize earlier than the rock
silicates. The Minerals of Nickel, Chromium, and
Platinum are usually found as early magmatic
deposits. The early magmatic deposits can be sub
divided into two groups:
o Dissemination deposits
o Segregation deposits
Dissemination deposits:
When magma crystallizes
conditions, a granular igneous rock is formed. In
such a rock early formed crystals of
may occur in dissemination.
Segregation deposits:
Magmatic segregation deposits are
formed as a result of gravitative
crystallization differentiation. In
case, the ore mineral which crystallize
early, get ocean-trated on a particular
part of igneous part. The ore deposits
thus formed are known as “Segregation
deposits”.
rly under seated
ore minerals
such
Late Magmatic Deposits:
The ore deposits which are formed to
called late magmatic deposits. The late magmatic deposits contain those ore
minerals which have crystallized at rather low temperature from the residual
magma. The magma which is left after crystallization of early for
is called residual magma. This magma frequently contains many ore minerals. The
late magmatic deposits include most of the magmatic deposits of iron and
titanium ores, these deposits are almost always associated with mafic igneous
rocks.
SUBLIMATION DEPOSITS:
Sublimation is a very minor process of formation of ore deposits. Sublimation
deposits contain only those minerals which have been volatilized by hear and
subsequently redeposit in the same form at low temperature and pressure. The
sublimation deposits are found associated with Volcanoes and Fumaroles. Sulfur
of this origin has been mined in Japan, Italy, and Mexico.
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
Texture of Ore Minerals; Importance of Studying Textures; Individual Grains Properties; Filling of voids; Texture Types; Genetically differentiated between Texture types; Secondary textures from replacement; Hypogene Texture; Supergene Texture; Primary texture formed from Melts; Primary texture of open-space deposition; Secondary textures from cooling; Secondary textures from deformation; TEXTURES OF ECONOMIC ORE DEPOSITS; Textures of Magmatic ores; Cumulus textures; Intergranular or intercumulus textures; Exsolution textures; Textures of hydrothermal ore deposits and skarns; Replacement textures; Open space filling textures; Textures characteristic of surfacial or near surface environments and processes; Criteria for identifying replacement textures; Vein and Veining have different Nature Features
CLASSIFICATION OF ORE DEPOSITS
The Mixture of ore minerals are gangue minerals form an Ore deposit. The ore
deposits are generally found enclosed within the country rocks. The ore deposits
are formed in many different ways. Depending upon the process that may
operate to produce them, the ore deposits may be classified as follow:
Magmatic ore deposits.
Sublimation ore deposits.
Pegmatitic ore deposits.
Contact metasomatic ore deposits.
Hydrothermal ore deposits
Cavity filling deposits.
Replacement deposits.
Sedimentation ore deposits.
Evaporation ore deposits.
Residual and mechanical concentration deposits
Metamorphic ore deposits.
MAGMATIC ORE DEPOSITS:
The magmatic ore deposits are the magmatic products which crystallize from
magmas. The magmatic ore deposits are classified as follows:
o Early magmatic deposits
o Late magmatic deposits
Early magmatic deposits:
Early magmatic deposits are formed during the
early stage of the magmatic period. In this case the
ore minerals crystallize earlier than the rock
silicates. The Minerals of Nickel, Chromium, and
Platinum are usually found as early magmatic
deposits. The early magmatic deposits can be sub
divided into two groups:
o Dissemination deposits
o Segregation deposits
Dissemination deposits:
When magma crystallizes
conditions, a granular igneous rock is formed. In
such a rock early formed crystals of
may occur in dissemination.
Segregation deposits:
Magmatic segregation deposits are
formed as a result of gravitative
crystallization differentiation. In
case, the ore mineral which crystallize
early, get ocean-trated on a particular
part of igneous part. The ore deposits
thus formed are known as “Segregation
deposits”.
rly under seated
ore minerals
such
Late Magmatic Deposits:
The ore deposits which are formed to
called late magmatic deposits. The late magmatic deposits contain those ore
minerals which have crystallized at rather low temperature from the residual
magma. The magma which is left after crystallization of early for
is called residual magma. This magma frequently contains many ore minerals. The
late magmatic deposits include most of the magmatic deposits of iron and
titanium ores, these deposits are almost always associated with mafic igneous
rocks.
SUBLIMATION DEPOSITS:
Sublimation is a very minor process of formation of ore deposits. Sublimation
deposits contain only those minerals which have been volatilized by hear and
subsequently redeposit in the same form at low temperature and pressure. The
sublimation deposits are found associated with Volcanoes and Fumaroles. Sulfur
of this origin has been mined in Japan, Italy, and Mexico.
A presentation on Hydrothermal wall rock alteration with case studies on geophysical applications.
References : https://drive.google.com/drive/folders/16VSZMPMASMNVB47JdBUa_7udBk1qvK2U?usp=sharing
How can minerals deposits be formed; GEOLOGICAL PROCESSES; Ore Fluids; Ore Forming Processes; Concentrating Processes; Magmatic mineral deposits; Residual mineral deposits ; Placer deposits; Sedimentary mineral deposits; Metamorhogenic mineral deposits; Hydrothermal mineral deposits ; Magmatic Deposits
Cumulate deposits: fractional crystallization processes can concentrate metals (Cr, Fe, PGE, Pt, Ni, Ti, Diamond ))
Pegmatites : late staged crystallization forms pegmatites and many residual elements are concentrated (Li, Ce, Be, Sn, U, Rare Earths (REE), Feldspar, Mica, Gems).
magmatic deposits; Mode of Formation of Magmatic Ores Deposits; Mode of Formation of Orthomagmatic Ores ; Fractional Crystallization (or Crystal fractionation ); Magmatic (or Liquid ) Immiscibility; Simple crystallization without concentration (Dissemination); Segregation of early formed crystals; (Layer Types); Injection of material concentrated elsewhere by differentiation Residual liquid segregation; Residual liquid injection; Immiscible liquid segregation; Immiscible-liquid-injection; Early magmatic deposit; Late magmatic deposit; Types of Magmatic Ore Deposits:Chromite; Fe-Ti (± V) oxides; Ni – Cu – Fe (± Pt) sulfides; Platinum Group Elements (PGEs); REE, and Zr in Carbonatites; Diamond in kimberlites.
What is an ore?, Ore deposit environments, Formation of Mineral Deposits, Endogenous (Internal) processes, Exogenous (Surficial) processes, Types of Sedimentary Rocks, Mineral Deposits Associated with Sedimentary Process, physical processes of ore deposit formation in the surficial realm, Erosion, weathering , transportation, sorting, Precipitation, Depositional Environments, Deposits formed by Weathering, Deposits formed by Sediment, Resources from the Sedimentary Environments
The current ppt discusses the different types of lineations formed due to deformation.
Lineations are genetically related to the foliation planes on which they occur, particularly where both are shaped by mineral orientations. Therefore, the planar and linear fabrics are both together aspects of the same three-dimensional geometry, which is related to the shape of the finite strain ellipsoid or,
more important still, to the history of incremental strains.
A presentation on Hydrothermal wall rock alteration with case studies on geophysical applications.
References : https://drive.google.com/drive/folders/16VSZMPMASMNVB47JdBUa_7udBk1qvK2U?usp=sharing
How can minerals deposits be formed; GEOLOGICAL PROCESSES; Ore Fluids; Ore Forming Processes; Concentrating Processes; Magmatic mineral deposits; Residual mineral deposits ; Placer deposits; Sedimentary mineral deposits; Metamorhogenic mineral deposits; Hydrothermal mineral deposits ; Magmatic Deposits
Cumulate deposits: fractional crystallization processes can concentrate metals (Cr, Fe, PGE, Pt, Ni, Ti, Diamond ))
Pegmatites : late staged crystallization forms pegmatites and many residual elements are concentrated (Li, Ce, Be, Sn, U, Rare Earths (REE), Feldspar, Mica, Gems).
magmatic deposits; Mode of Formation of Magmatic Ores Deposits; Mode of Formation of Orthomagmatic Ores ; Fractional Crystallization (or Crystal fractionation ); Magmatic (or Liquid ) Immiscibility; Simple crystallization without concentration (Dissemination); Segregation of early formed crystals; (Layer Types); Injection of material concentrated elsewhere by differentiation Residual liquid segregation; Residual liquid injection; Immiscible liquid segregation; Immiscible-liquid-injection; Early magmatic deposit; Late magmatic deposit; Types of Magmatic Ore Deposits:Chromite; Fe-Ti (± V) oxides; Ni – Cu – Fe (± Pt) sulfides; Platinum Group Elements (PGEs); REE, and Zr in Carbonatites; Diamond in kimberlites.
What is an ore?, Ore deposit environments, Formation of Mineral Deposits, Endogenous (Internal) processes, Exogenous (Surficial) processes, Types of Sedimentary Rocks, Mineral Deposits Associated with Sedimentary Process, physical processes of ore deposit formation in the surficial realm, Erosion, weathering , transportation, sorting, Precipitation, Depositional Environments, Deposits formed by Weathering, Deposits formed by Sediment, Resources from the Sedimentary Environments
The current ppt discusses the different types of lineations formed due to deformation.
Lineations are genetically related to the foliation planes on which they occur, particularly where both are shaped by mineral orientations. Therefore, the planar and linear fabrics are both together aspects of the same three-dimensional geometry, which is related to the shape of the finite strain ellipsoid or,
more important still, to the history of incremental strains.
Rocks are a combination of minerals that are bonded together in some way.
All rocks are made of minerals
Monomineralic- contain one mineral
Polymineralic- contain more than one mineral
Rocks are classified into three groups by how they are formed
Igneous Rocks
Sedimentary rock
Metamorphic rock
S6E5. Students will investigate the scientific view of how the earth’s surface is formed.
d. Describe processes that change rocks and the surface of the earth.
regeneration
Proliferative Capacities of Tissues
Stem Cells
REPAIR BY CONNECTIVE TISSUE
Angiogenesis
Migration of Fibroblasts and ECM Deposition (Scar Formation)
PATHOLOGIC ASPECTS OF REPAIR
What is wound healing?
Classification of Wounds
Classification of Wounds Closure
Risk Factors for Surgical Wound Infections
Antibiotic Use
Hypertrophic Scars and Keloids
25.1Digestion and Absorption of Lipids
25.2Triacylglycerol Storage and Mobilization
25.3 Glycerol Metabolism
25.4 Oxidation of Fatty Acids
25.5 ATP Production from Fatty Acid Oxidation
25.6 Ketone Bodies
25.7 Biosynthesis of Fatty Acids: Lipogenesis
25.8 Relationship Between Lipogenesis and Citric Acid Cycle Intermediates
25.9 Fate of Fatty-Acid Generated Acetyl CoA
25.10 Relationships Between Lipid and Carbohydrate Metabolism
25.11B Vitamins and Lipid Metabolism
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
1. Lecture 7: Sedimentary Rocks
Processes related to the formation of sedimentary rocks: weathering, erosion and transportation,
deposition and diagenesis
Weathering: the physical breakdown (disintegration) and chemical alteration (decomposition) of rocks
at or near the Earth’s surface
Mechanical Weathering: The physical breaking up of rock into smaller pieces → leads to an
increase in surface area; prevails in cold climates, high altitudes, dry regions
• Frost wedging: repeated cycles of freezing and thawing; the expansion force of water as it
freezes is sufficient to split any mineral or rock.
• Heating and cooling: Differences in temperature in a rock give rise to differential expansion
(heating) and contraction (cooling).
• Wetting and drying: The disruption of soil results in the swelling and contracting of soil
particles.
• Organisms: Action of organisms, including animals and plants, reduces the size of rocks and
minerals
• Unloading: the removal of thick layers of sediments overlying deeply buried rocks by
erosion or uplift. (a.k.a. exfoliation)
Chemical Weathering: breakdown of minerals by chemical reactions with water, with chemicals
dissolved in water or with gases in the air; progression from less stable minerals to more stable
minerals
• Hydration - combination of a solid mineral or element with water.
• Oxidation and Reduction - used in mineral weathering, is both the chemical combination of
oxygen with a compound and the change in oxidation number of some chemical element
• Ion-exchange - involves the transfer of charged atoms (ions) of calcium, magnesium,
sodium, and potassium between waters rich in one of the ions and a mineral rich in another
• Dissolution - the dissolving of a solid in a liquid
• Hydrolysis - process of minerals reacting with water to form hydroxides, which usually are
more soluble than the original mineral. example - pyroxene to Fe oxide 4FeSiO3 + H2O + O2
→ 4FeO(OH) + 4SiO2
• Acidification - Weathering is accelerated by the presence of hydrogen ion in water, such as
that provided by carbonic and organic acids.
Common Weathering Products
Soluble Ions: Na, Ca, K, Mg
Clay Minerals: kaolinite, montmorillonite
Resistant Minerals: quartz, hematite, magnetite, garnet, diamond
Alterations due to Chemical Weathering
• Decomposition of unstable minerals
• Generation or retention of those minerals which are in equilibrium with the Earth’s surface
*account for predominance of certain minerals in soil.
Weathering Factors
Source Composition
• Specifically involves the mineralogy, texture and rock structure
2. • Fine-grained rocks decompose chemically more readily than coarse-grained rocks
Climate
• Temperature fluctuations determine importance of ice-wedging and insolation
• Precipitation governs the extent of hydrolysis, hydration and solution
Topographic Relief
• Influence the amount of rock exposed to the forces of weathering
• Slope steepness controls the rate at which weathering products are eroded to be transported
elsewhere
• Angle of repose: the stable angle of the slope of unconsolidated material (i.e. sediments)
Soil – combination of rock, air, water and organic material
Soil type – varies in color, texture, mineral content
• O Horizon - organic layer of soil, made up mostly of leaf litter and humus (decomposed organic
matter)
• A Horizon - made up of humus mixed with mineral particles
• E Horizon - leaching layer; light in color; made up mostly of sand and silt, having lost most of its
minerals and clay as water drips through the soil.
• B Horizon – contains clay and mineral deposits (e.g. iron, aluminum oxides, and calcium
carbonate) that it receives from layers above it when water drips from the soil above.
• C Horizon –it consists of slightly broken-up bedrock. Plant roots do not penetrate into this layer
because of very little organic material.
• R Horizon - unweathered rock layer (regolith)
Erosion – the removal of material by mobile agents such as water, wind, ice or man; involves movement
of rock or soil
Agents of Erosion and Transportation: gravity, ice, organism, water, wind
Ways of physically transporting particles
• Suspension: floating, especially, clay-sized particles
• Saltation: “jumping” particles
• Traction: most of the time in contact with the sediment floor; “rolling” or “dragging”
Sorting - measure of variation of grain sizes
Roundness: measures how rounded corners are
Sphericity: measures sphere-like shape of clasts
*well-sorted sediments, rounded and spherical grains indicate longer time of weathering and
erosion and/or farther distance from source
Deposition: transporting sediment requires energy; grain size has relationship with energy
• Smaller grains take less energy; bigger grains take more
• If river slows down, sediment will drop out; if river speeds up, water can pick up sediment
Diagenesis: Physical, chemical, and biological processes which collectively result in transformation of
sediments into sedimentary rock and modification of the texture and mineralogy of the rock
Stages of diagenesis:
Early diagenesis: takes place from sedimentation until shallow burial
Late diagenesis: from deep burial to subsequent uplift
The different types of diagenetic processes are:
3. • Compaction: the process by which the volume of a sediment is reduced as the grains are
squeezed together
• Recrystallization: transformation of a mineral to another mineral of same chemical composition
• Cementation: usual cements include quartz and calcite
• Replacement: transformation of a mineral to another chemically distinct mineral
• Bioturbation: disturbance of a organisms to the sediment
Sedimentary Rock Classification
• Siliciclastic/Clastic: based on dominant grain size on Udden-Wentworth scale
• Chemical: Precipitated from
solution; based on mineralogy
o Limestone – calcite,
dolomite, other
carbonates (CaCO3)
o Chert - quartz (SiO2)
o Rock salt – halite (NaCl)
o Gypsum – gypsum
(CaSO4 . H2O)
• Biochemical: chemically
precipitated with the help of
organisms; contains fossils
o Peat and coal:
plant remains
o Limestone
o Chert
Sedimentary Structures: formed during sediment deposition (e.g., cross bedding, graded bedding and
ripple marks)
Lecture 8: Sedimentary Environments
Capacity: refers to the maximum load of sediment that a stream can transport
Competence: refers to the heaviest particles a stream can erode and therefore transport
Sedimentary Environments: a part of the earth’s surface, physically, chemically, and biologically distinct
from adjacent terrain (different sedimentary facies); defined by fauna and flora, geology,
geomorphology, climate, weather, temperature, and if sub-aqueous, the depth, salinity, and current
system of the water.
Terrestrial Environments
• Fluvial - rivers, streams; main transporters of sediment on land
Meandering River System: consist of one single channel; low gradient and high sinuosity
• sediments deposited at the inner sides of meander bends; deposition of sediments takes
place in the channel, on the levees and in the basins.
• lag deposits: gravel and coarse sand found on channel floor
• point bars: finer sand settles along the inner bends of the river
• avulsion: changing of meanders
• oxbow lakes: truncated meanders
4. Braided River System: have one single channel of low sinuosity and high gradient, with multiple
`thalwegs' (deepest part of the channel) and bars.
• high sediment load
• during times of maximum discharge, the channel is completely inundated; in times of low
discharge, multiple thalwegs and bars reappear within the channel
• Lacustrine – lakes; landlocked body of standing, non-marine water
• Well-sorted sands - Silt/clay
• Water is not disturbed often so fossils are easily preserved
• Also, laminae (very thin layers of sediment) are preserved
• Sometimes have fossils made from freshwater organisms
• Paludal – swamp, marshes
• Silt/clay
• Shallow and frequent floods
• Rocks have high organic content due to the number of organisms in swamp
• Lots of plant fossils
• Glacial –Glaciers; flowing ice erodes rocks and transports sediment
• Ice-contact deposits characterized by extremely poor sorting and lack of stratification
• Alpine/Mountain Glaciers - Relatively small glaciers at higher elevations in mountainous
regions.
• Ice Sheets (Continental glaciers): the largest types of glaciers on Earth.
o cover large areas of the land including mountain areas.
o modern ice sheets cover Greenland and Antarctica.
• Ice Shelves: sheets of ice floating on water and attached to land.
o usually occupy coastal embayments.
• Can also be classified as:
o Temperate Glaciers - ice near melting point.
o Polar Glaciers - ice below melting point.
Landforms produced by mountain glaciers
o Cirques - bowl shaped depressions that occur at the heads of mountain glaciers
o Glacial Valleys - Valleys that once contained glacial ice become eroded into a "U" shape
in cross section.
o Arêtes - If two adjacent valleys are filled with glacial ice, the ridges between the valleys
can be carved into a sharp knife-edge ridge, called an arête.
o Horns - Where three or more cirques are carved out of a mountain, they can produce a
sharp peak called a horn.
o Hanging Valleys - A valley that has greater elevation than the valley to which it is
tributary.
o Fjords - narrow inlets along seacoasts once occupied by a fjord glacier.
Ice Laid Deposits
o Till - nonsorted glacial drift deposited directly from ice. A till that has undergone
diagenesis and has turned into a rock is called a tillite.
o Erratics - a glacially deposited rock or fragment that now rests on a surface made of
different rock.
5. o Moraines - are deposits of till that have a form different from the underlying bedrock.
• Desert Environments: vast areas where sand is deposited in dunes; carried by the wind; likely to
happen in areas with low rainfall, high atmospheric pressure, and low humidity (subtropics and
middle latitudes).
• Sediment becomes finer the longer and further it is carried by the wind.
• Wind: a turbulent stream of air
• low density - limits competence
• unrestricted flow - enables spread over wide areas and high atmosphere
• Two types of wind erosion (dry, loose particles of dust and salt are lifted and blown away) :
• abrasion
• deflation
• deflation lag deposits - Coarsest clasts (desert pavement)
• loess - Unconsolidated, unstratified aggregation of small, angular mineral fragments, usually
buff in color. Generally believed to be wind-deposited.
• dunes - Sand dunes form when there is (1) a ready supply of sand, (2) a steady wind, and (3)
some kind of obstacle such as vegetation, rocks, or fences, to trap some of the sand. Sand dunes
form when moving air slows down on the downwind side of an obstacle.
Types of Sand Dunes:
• Barchan dunes - crescent-shaped dunes. They form in areas where there is a hard ground
surface, a moderate supply of sand, and a constant wind direction.
• Transverse dunes- large fields of dunes that resemble sand ripples on a large scale. Consist of
ridges of sand with a steep face in the downwind side, form in areas where there is abundant
supply of sand and a constant wind direction.
• Linear dunes - long straight dunes that form in areas with a limited sand supply and converging
wind directions.
• Parabolic dunes - are "U" shaped dunes with an open end facing upwind. Form in areas with
abundant vegetation and constant wind. Most common in coastal areas.
• Star dunes - dunes with variable arms and slip face directions. Form in areas with abundant
sand supply and variable wind direction.
• Alluvial Fans: a river or a stream drops a large amount of sediment in cone or fan-shaped deposits
at the base of mountains.
• lots of coarse particles; usually forming poorly-sorted sandstone and conglomerate
• deposited by high energy floods or mudflows
• cone-shaped
• typically found in tectonically active regions (rifting continental grabens and foreland basins)
Transitional Environment
Depositional sedimentary environments at or near the transition between the land and the sea
Deltas: prograding depositional bodies that form at the point where a river meets a lake or the sea;
formed through continuous progradation (where rate of alluvium deposit > rate of erosion of
sediments)
Parts of a Delta:
• delta plain - composed of meandering flood plains, swamps, and beach complex
• delta front - steeper part
6. • prodelta - broadly sloping that grades into the open shelf
Types of Delta
Wave-dominated delta: smoothly arcuate; tidal action reworks sediment.
• much sandier than the other types of delta
• fan-shaped (Arcuate delta), with the wide portion of the fan farthest from the mainland.
• Nile Delta, Egypt
River-dominated delta: large sediment volume from rivers
• Lobate to elongate in shape
• If channels encroach delta, the shape of a Bird’s foot delta is apparent
• Mississippi Delta, USA
Tide-dominated delta: linear features parallel to tidal flow and perpendicular to shore
• The waves force the sediment to spread outwards in both directions from the river's mouth,
making a pointed tooth shape with sides that curve inward (Cuspate delta)
• Tiber Delta, Italy
Factors Affecting Delta Formation and Facies:
• water and sediment yield of the fluvial system feeding the delta (climate, tectonics),
• seasonal changes in water level and sediment yield (climate),
• river-mouth processes (differences in river/sea water densities, buoyancy),
• coastal configuration, mainly shelf slope and topography (delta gradient),
• wave and tidal energy acting on the coast (climate, gradient, tidal range),
• along shore winds and currents,
• geometry and tectonics (subsidence) of the receiving basin.
Marine Environment
an environment related to the sea and other major water bodies including their surface interface and
interaction
Reef: a rock, sandbar or other feature lying beneath the surface of the low water.
Coral Reefs: composed of carbonate structures formed by carbonate secreting organisms; builds up on
continental shelves. They are wave resistant, mound like structures
Types:
• Abiotic Reefs: Erosion of sand due to great waves
• Biotic Reefs: Composed of carbonate structures formed by carbonate secreting organisms
• Artificial Reefs: Produced from man – made materials.
Reef kinds in relation to an adjacent landmass
• Fringing Reefs: coral reef that is directly attached or borders the shore of an island or continent
• Barrier Reefs: a long narrow coral reef roughly parallel to the shore; separated from it at same
distance by a lagoon
• Atoll: continuous or broken circle of coral reef and low coral islands surrounding a central lagoon.
Continental Margin
Continental Shelf: continuous with the coastal plain sequences of the continents; part of the continental
margin that is between the shoreline and the continental slope (~200m).
• quartz and clay minerals are dominant; fossils are mostly marine invertebrates
Continental Slope: sloping region between a continental shelf and a continental rise. A continental slope
is typically about 20 km wide, consists of mud and silts
7. Continental Rise: between continental slope and abyssal plain; gentle incline and generally smooth
topography; may bear submarine canyons
Abyssal Plain: flat region of the ocean floor; covered with pelagic mud with fine sand layers from distal
turbidites
Longshore drift: the movement of sand along a beach. Waves approaching the beach create a zigzag
current that transports the sediments parallel to the length of the beach. Longshore current is the zigzag
movement of water particles parallel to the shore
Spit: a long, narrow sandbar that is connected to the shore at one end. It is deposited and shaped by
currents flowing along the shore, and often forms an arc around the mouth of water.
Tombolos and Bars: A bar of sediments that connects an island to the mainland.
Lagoons and Barrier Islands: Lagoons are bodies of water on the landward side of barrier islands.
Tidal flats: periodically flooded and drained by tides (usually twice each day). Laminated or rippled clay,
silt, and fine sand (either terrigenous or carbonate) may be deposited.
Sabkhas: tidal flats or pools that are periodically inundated with water. The water evaporated leaving
behind deposits of evaporate minerals like halite (salt) or gypsum.
Resources
Sediments are used as:
• Sand and gravel: used as road base, components of concrete, fill, sand for sandboxes; if pure
sand, for Glass making pure clays for ceramics (dinner ware/plate ware)
• Fossil fuels (e.g. coal, petroleum, natural gas)
• Food additives (e.g. sodium and potassium salts)
• Placer deposits (grains of economic minerals) e.g. gold, diamond, garnet
Sedimentary rocks can be used as
• Building stone, filtering materials
• Construction and manufacturing
• Petroleum and natural gas
• Uranium
Lecture 9: Metamorphic Rocks
Agents of Metamorphism
• Heat
• Geothermal gradient - temperature increases with depth (20o
– 30o
C per km in the crust)
• Large bodies of molten rock or intrusive bodies
• Pressure
• When subjected to confining pressure, minerals may recrystallize into more compact forms.
• Confining pressure – equal stress in all directions; from overlying rock
• Differential stress – unequal pressure in different directions
• Chemically active fluids
• Water trapped in pore spaces of the original rock.
• Water released during dehydration of minerals, such as amphibole or mica.
• Water from magmatic bodies (hydrothermal fluids).
Types
• Contact Metamorphism: occurs when magma invades pre-existing rock. A zone of alteration called
an aureole (or halo) forms around the emplaced magma .
• Takes place at shallow depths (0-6km) and low pressure.
8. • Regional Metamorphism: Takes place at considerable depths over an extensive area (5-20 km,
sometimes more than 30 km) under high pressure and is associated with the process of mountain
buliding.
• When continents collide or oceanic crust subducts
• Hydrothermal Metamorphism or Metasomatism: Chemical alteration at high temperatures and
moderate pressures by hot, ion-rich (hydrothermal) fluids that circulate through fissures and cracks.
• Rich ore deposits are often formed as a result of hydrothermal metamorphism
• Shock/Impact Metamorphism: When an extraterrestrial body, such as a meteorite or comet
impacts with the Earth or if there is a very large volcanic explosion, ultrahigh pressures can be
generated in the impacted rock
• forms SiO2 polymorphs coesite and stishovite.
• Dynamic/Cataclastic Metamorphism: a result of mechanical deformation, like when two bodies of
rock slide past one another along a fault zone. Heat is generated by the friction of sliding along such
a shear zone, and the rocks tend to be mechanically deformed, being crushed and pulverized, due to
the shearing.
• Burial Metamorphism: When sedimentary rocks are buried to depths of several hundred meters,
temperatures greater than 300°C may develop in the absence of differential stress.
• New minerals grow like zeolite, but the rock does not appear to be metamorphosed.
Classification is based on:
• Texture – size, shape and relationships of constituent minerals (foliated and non-foliated)
• Foliated – exhibits a pervasive planar structure known as foliation which is due to the nearly
parallel alignment of minerals and/or compositional and mineralogical layering in the rock
• Non-foliated – no preferred mineral orientations; metamorphism leads to transformation of
one mineral to another
• Protolith – original rock that was transformed by metamorphism (in low-grade metamorphic
rocks, original textures may still be preserved and might allow determination of likely protolith)
• Mineralogy – mineral assemblage present
Characteristic Metamorphic Minerals: garnet, kyanite, andalusite, sillimanite, staurolite
Metamorphic grade: indicates the pressure and temperature conditions based on the mineralogy
Metamorphic facies: indicates which pressure and temperature conditions present during
metamorphism
Resources:
1. Marble is used for statues and ornamental building stone.
2. Slate is used for roofing, flooring, billiard/pool tables, and blackboards.
3. Talc is ground into powder.
9. 4. Graphite is used in pencils and lubricants.
5. Garnet and corundum used as gemstones and abrasives.
6. Kyanite, andalusite, sillimanite used as raw materials in the ceramics industry.
7. Sulfide deposits (bornite, chalcopyrite, galena, pyrite, and sphalerite)
8. Iron and tin oxide deposits (hematite, magnetite and cassiterite)
9. Tungsten deposits (wolframite and scheelite)
10. Precious metal deposits (gold)
Lecture 10. Rock Deformation
Stress: a measure of internal force applied to a deformable body
Strain: material response (deformation) due to the stress applied; change in size and shape
Types of stress:
Confining stress/pressure: equal stress in all directions (in geology, lithostatic stress; in oceanography,
hydrostatic stress)
Differential stress: unequal stress
Tensional stress: “stretching”,
component perpendicular to given
surface (e.g., Divergent Plate
Boundaries)
Compressional stress:
“squeezing”, component perpendicular
to given surface (e.g., Convergent Plate
Boundaries)
Shear stress: sidewards
movement in opposite direction (e.g.,
Transform Plate Boundaries)
Types of deformation (strains)
Elastic: under stress, solid material deforms; however after stress is removed, solid material will return
to its original shape (reversible)
Ductile: under stress, solid material deforms and when stress is removed, solid material does not return
to its original shape (irreversible); forms folds
Brittle: under much stress, material breaks past its elastic and plastic (ductile) deformation ranges
(irreversible); forms joints, fractures and faults
Factors that affect deformation
Type of force applied: the stronger the force, the higher the tendency to fail
Pressure: higher confining pressure, less likely to fracture
Temperature: higher temperature, less likely to fracture; material tends to behave like fluid
Rock (mineral) composition: quartz, olivine, and feldspars are very brittle, while clay minerals, micas,
and calcite are more ductile; water in chemical composition of minerals make it more ductile
Measuring deformation in rocks
Strike is the azimuth (degrees east of north) of the line formed by the intersection of a layer interface or
bedding plane with the horizontal
Dip is the angle between the layer interface or bedding plane and the horizontal measured
perpendicular to the strike direction
10. Notation: strike = N x E/W, dip = x N/S E/W; where x is a
number (however, the dip
direction should always be perpendicular [90 degrees] from
the strike direction, i.e.
if the strike direction is NW, the dip direction should be either
NE or SW only)
Parts of a fold
Axial plane: imaginary surface that divides a fold as symmetrically as possible, one limb on each side.
Fold axis: the line made by the length-wise intersection of the axial plane with beds in the fold
Limbs: the two sides of an anticline or syncline
Anticline (“A”): oldest rocks at the core
Syncline (“sink”): youngest rocks at the core
Dome: Anticlines from all directions
Basin: Synclines from all directions
Joint: regular (same strikes and dips, regular spacing) breaks in rock with no movement
Fracture: irregular breaks in rock with no movement
Fault: breaks with movement
Classification of faults:
Strike-slip fault: strike-wise movement of blocks
Right-lateral (Dextral) Fault: opposite block moves to the left
Left-lateral (Sinistral) Fault: opposite block moves to the right
Dip-slip fault: dip-wise movement of blocks
Normal Fault: Hanging wall goes down, footwall goes up; tensional
Reverse Fault: Hanging wall goes up; footwall goes down; compressional
Thrust Fault: A reverse fault with an angle of depression less than 15 degrees
Oblique-slip fault: faults with strike-slip and dip components