This document describes a proposed system for remote monitoring and control of industrial parameters using solar power and IoT technology. The system uses various sensors to measure parameters like temperature, pressure, gas levels etc. and sends the data via an IoT module to the cloud for storage. A user can access the parameter values through software on their device and control devices remotely. If any parameters exceed thresholds, automated actions are taken like turning on cooling fans. The system aims to improve safety and efficiency by allowing constant remote monitoring without human intervention. It can send alerts if emergencies like fires occur and notify authorities. The solar power aspect makes it more sustainable by reducing energy usage for monitoring.
This project aims to develop dual axis solar tracker with IOT monitoring system using Arduino. Generally, solar energy is the technology to get useful energy from sunlight. Solar energy has been used in many traditional technologies over the centuries and has been widely used in the absence of other energy supplies. Its usefulness is widespread when awareness of the cost of the environment and the supply is limited by other energy sources such as fuel. The solar tracking system is the most effective technology to improve the efficiency of solar panels by tracking and following the sun's movement. With the help of this system, solar panels can improve the way of sunlight detection so that more electricity can be collected as solar panels can maintain a sunny position. Thus the project discusses the development of two-axis solar-tracking developers using Arduino Uno as main controller the system. For develops this project, four light-dependent resistors (LDRs) have been used for sunlight detection and a maximum light intensity. Two servo motors have been used to rotate the solar panel according to the sun's light source detected by the LDR. Next a WIFI ESP8266 device is used as an intermediary between device and IOT monitoring system. The IOT monitoring system is a website that functions to store data. The efficiency of this system has been tested and compared with a single axial solar tracker. As a result, the two-axis solar tracking system generates more power, voltage and current.
The Short and Long Term Peace Strategies: "Anglophone" Crisis, Cameroonijtsrd
Just like in Ethiopia, the unrest in the Republic of Cameroon is rooted in the countrys history, which dates back to many years. This paper seeks to analyze the institutional and attitudinal elements on the way forward for the restoration to normalcy of the state of affairs within the national territory. It is not a recipe for apportioning blames but of principles and options to a pacific settlement of disputes within the national territory. Maxwell N. Achu ""The Short and Long Term Peace Strategies: “Anglophone†Crisis, Cameroon"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23512.pdf
Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/other/23512/the-short-and-long-term-peace-strategies-%C3%A2%E2%82%AC%C5%93anglophone-crisis-cameroon/maxwell-n-achu
Design of Dual Axis Solar Tracker System Based on Fuzzy Inference Systems ijscai
Electric power is a basic need in today’s life. Due to the extensive usage of power, there is a need to look
for an alternate clean energy source. Recently many researchers have focused on the solar energy as a
reliable alternative power source. Photovoltaic panels are used to collect sun radiation and convert it into
electrical energy. Most of the photovoltaic panels are deployed in a fixed position, they are inefficient as
they are fixed only at a specific angle. The efficiency of photovoltaic systems can be considerably increased
with an ability to change the panels angel according to the sun position. The main goal of such systems is
to make the sun radiation perpendicular to the photovoltaic panels as much as possible all the day times.
This paper presents a dual axis design for a fuzzy inference approach-based solar tracking system. The
system is modeled using Mamdani fuzzy logic model and the different combinations of ANFIS modeling.
Models are compared in terms of the correlation between the actual testing data output and their
corresponding forecasted output. The Mean Absolute Percent Error and Mean Percentage Error are used
to measure the models error size. In order to measure the effectiveness of the proposed models, we
compare the output power produced by a fixed photovoltaic panels with the output which would be
produced if the dual-axis panels are used. Results show that dual-axis solar tracker system will produce
22% more power than a fixed panels system.
KEYWORDS
Fuzzy, Membership function, Universe of discourse, PV, ANFIS, DC motor, FLC.
1. INTRODUCTION
Fuzzy logic can be viewed as an extension of classical logical
Power output from a small solar panel can be affected by its power consumption when it consumes power from the solar panel. There has been a lack of proper research and experiment in the use of small solar panel with tracking systems. Its significance was detailed in this paper where the voltage output are compared with those which were externally powered. The solar trackers and a microcontroller have been designed and fabricated for this research. Due to the use of the tracking system (single axis and dual axis), the power consumption varies from one to another and its effect on the voltage output. Several experiments have been conducted and it was concluded that small solar panels are not efficient enough to utilize with tracking capabilities due to an increase in power consumption. The externally powered system was found to generate 18% more output compared to a selfsustaining system and that the increase in average power consumptions compared to a fixed panel were 31.7% and 82.5% for single-axis and dualaxis tracker respectively. A concrete evidence was made that utilizing solar tracking capabilities for low power rated solar panel is unfeasible.
This project aims to develop dual axis solar tracker with IOT monitoring system using Arduino. Generally, solar energy is the technology to get useful energy from sunlight. Solar energy has been used in many traditional technologies over the centuries and has been widely used in the absence of other energy supplies. Its usefulness is widespread when awareness of the cost of the environment and the supply is limited by other energy sources such as fuel. The solar tracking system is the most effective technology to improve the efficiency of solar panels by tracking and following the sun's movement. With the help of this system, solar panels can improve the way of sunlight detection so that more electricity can be collected as solar panels can maintain a sunny position. Thus the project discusses the development of two-axis solar-tracking developers using Arduino Uno as main controller the system. For develops this project, four light-dependent resistors (LDRs) have been used for sunlight detection and a maximum light intensity. Two servo motors have been used to rotate the solar panel according to the sun's light source detected by the LDR. Next a WIFI ESP8266 device is used as an intermediary between device and IOT monitoring system. The IOT monitoring system is a website that functions to store data. The efficiency of this system has been tested and compared with a single axial solar tracker. As a result, the two-axis solar tracking system generates more power, voltage and current.
The Short and Long Term Peace Strategies: "Anglophone" Crisis, Cameroonijtsrd
Just like in Ethiopia, the unrest in the Republic of Cameroon is rooted in the countrys history, which dates back to many years. This paper seeks to analyze the institutional and attitudinal elements on the way forward for the restoration to normalcy of the state of affairs within the national territory. It is not a recipe for apportioning blames but of principles and options to a pacific settlement of disputes within the national territory. Maxwell N. Achu ""The Short and Long Term Peace Strategies: “Anglophone†Crisis, Cameroon"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23512.pdf
Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/other/23512/the-short-and-long-term-peace-strategies-%C3%A2%E2%82%AC%C5%93anglophone-crisis-cameroon/maxwell-n-achu
Design of Dual Axis Solar Tracker System Based on Fuzzy Inference Systems ijscai
Electric power is a basic need in today’s life. Due to the extensive usage of power, there is a need to look
for an alternate clean energy source. Recently many researchers have focused on the solar energy as a
reliable alternative power source. Photovoltaic panels are used to collect sun radiation and convert it into
electrical energy. Most of the photovoltaic panels are deployed in a fixed position, they are inefficient as
they are fixed only at a specific angle. The efficiency of photovoltaic systems can be considerably increased
with an ability to change the panels angel according to the sun position. The main goal of such systems is
to make the sun radiation perpendicular to the photovoltaic panels as much as possible all the day times.
This paper presents a dual axis design for a fuzzy inference approach-based solar tracking system. The
system is modeled using Mamdani fuzzy logic model and the different combinations of ANFIS modeling.
Models are compared in terms of the correlation between the actual testing data output and their
corresponding forecasted output. The Mean Absolute Percent Error and Mean Percentage Error are used
to measure the models error size. In order to measure the effectiveness of the proposed models, we
compare the output power produced by a fixed photovoltaic panels with the output which would be
produced if the dual-axis panels are used. Results show that dual-axis solar tracker system will produce
22% more power than a fixed panels system.
KEYWORDS
Fuzzy, Membership function, Universe of discourse, PV, ANFIS, DC motor, FLC.
1. INTRODUCTION
Fuzzy logic can be viewed as an extension of classical logical
Power output from a small solar panel can be affected by its power consumption when it consumes power from the solar panel. There has been a lack of proper research and experiment in the use of small solar panel with tracking systems. Its significance was detailed in this paper where the voltage output are compared with those which were externally powered. The solar trackers and a microcontroller have been designed and fabricated for this research. Due to the use of the tracking system (single axis and dual axis), the power consumption varies from one to another and its effect on the voltage output. Several experiments have been conducted and it was concluded that small solar panels are not efficient enough to utilize with tracking capabilities due to an increase in power consumption. The externally powered system was found to generate 18% more output compared to a selfsustaining system and that the increase in average power consumptions compared to a fixed panel were 31.7% and 82.5% for single-axis and dualaxis tracker respectively. A concrete evidence was made that utilizing solar tracking capabilities for low power rated solar panel is unfeasible.
This project deals with the CAD design and construction of an automatic Solar Tracking system for Sun Tracking and Sun Following based upon the sun vector and the sun's position at any given time and the position of the sun for any GPS location on the earth. It drives hybrid solar Stirling technology for thermal and electricity generation and finds application in smart microgrid development for power and energy distribution an dispatch in off-grid and grid-tied applications. Automatic sun tracker positioner and control system for a motorized parabolic dish solar reflector and mechatronic solar tracking control system project describes the development and CAD design in a dual-axis sun tracker application for a stand-alone off-grid 3 kW solar electrical self-tracking concentrating solar power system. This autonomous power stand-alone solar tracking application and parabolic collector harness sunlight in a dish Stirling system or concentrated photovoltaic system by implementing a dynamic mechatronic platform and digital electronic control system for an autonomous concentrating solar power for CSP and CPV. The same sun tracker can also be used in solar PV photovoltaic where the solar panels follow the sun throughout the day.
Single AXIs Smart SOLAR TRACKING SYSTEM USING ARDUINOasadur babu
To design a smart solar tracking system
To construct a solar tracking circuit to improve the performance of PV system
To test the functionality of LDR sensor and Servo Motor in tracking system
To design a tracking system with low cost components
Monitoring and Control of Solar Power System using Reliance SCADAijtsrd
This system presents the monitoring and control of real time data acquisition of a solar power system in reliance SCADA. SCADA supervisory control and data acquisition systems are currently employed in many applications, such as home automation, greenhouse automation, and hybrid power systems. Commercial SCADA systems are costly to set up and maintain therefore those are not used for small renewable energy systems. This system demonstrates applying Reliance SCADA and Arduino Uno on a small photovoltaic PV power system to monitor the current, voltage, of the PV and battery and also control the load from SCADA. The designed system uses low cost sensors, an Arduino Uno microcontroller, and free Reliance SCADA software. The Arduino Uno microcontroller collects data from sensors and communicates with a computer through a USB cable. Uno has been programmed to transmit data to Reliance SCADA on PC. In addition, Modbus library has been uploaded on Arduino to allow communication between the Arduino and our SCADA system by using the MODBUS RTU protocol. The results of the experiments demonstrate that SCADA works in real time and can be effectively used in monitoring a solar energy system. Khin Pyone Ei Aung | Nyan Phyo Aung | Lwin Lwin Htay "Monitoring and Control of Solar Power System using Reliance SCADA" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26459.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26459/monitoring-and-control-of-solar-power-system-using-reliance-scada/khin-pyone-ei-aung
Making model of dual axis solar tracking with Maximum Power Point Trackingijsrd.com
Now a days solar harvesting is more popular. As the popularity become higher the material quality and solar tracking methods are more improved. There are several factors affecting the solar system. Major influence on solar cell, intensity of source radiation and storage techniques The materials used in solar cell manufacturing limit the efficiency of solar cell. This makes it particularly difficult to make considerable improvements in the performance of the cell, and hence restricts the efficiency of the overall collection process. Therefore, the most attainable maximum power point tracking method of improving the performance of solar power collection is to increase the mean intensity of radiation received from the source used. The purposed of tracking system controls elevation and orientation angles of solar panels such that the panels always maintain perpendicular to the sunlight. The measured variables of our automatic system were compared with those of a fixed angle PV system. As a result of the experiment, the voltage generated by the proposed tracking system has an overall of about 28.11% more than the fixed angle PV system. There are three major approaches for maximizing power extraction in medium and large scale systems. They are sun tracking, maximum power point (MPP) tracking or both.
This project deals with the CAD design and construction of an automatic Solar Tracking system for Sun Tracking and Sun Following based upon the sun vector and the sun's position at any given time and the position of the sun for any GPS location on the earth. It drives hybrid solar Stirling technology for thermal and electricity generation and finds application in smart microgrid development for power and energy distribution an dispatch in off-grid and grid-tied applications. Automatic sun tracker positioner and control system for a motorized parabolic dish solar reflector and mechatronic solar tracking control system project describes the development and CAD design in a dual-axis sun tracker application for a stand-alone off-grid 3 kW solar electrical self-tracking concentrating solar power system. This autonomous power stand-alone solar tracking application and parabolic collector harness sunlight in a dish Stirling system or concentrated photovoltaic system by implementing a dynamic mechatronic platform and digital electronic control system for an autonomous concentrating solar power for CSP and CPV. The same sun tracker can also be used in solar PV photovoltaic where the solar panels follow the sun throughout the day.
Single AXIs Smart SOLAR TRACKING SYSTEM USING ARDUINOasadur babu
To design a smart solar tracking system
To construct a solar tracking circuit to improve the performance of PV system
To test the functionality of LDR sensor and Servo Motor in tracking system
To design a tracking system with low cost components
Monitoring and Control of Solar Power System using Reliance SCADAijtsrd
This system presents the monitoring and control of real time data acquisition of a solar power system in reliance SCADA. SCADA supervisory control and data acquisition systems are currently employed in many applications, such as home automation, greenhouse automation, and hybrid power systems. Commercial SCADA systems are costly to set up and maintain therefore those are not used for small renewable energy systems. This system demonstrates applying Reliance SCADA and Arduino Uno on a small photovoltaic PV power system to monitor the current, voltage, of the PV and battery and also control the load from SCADA. The designed system uses low cost sensors, an Arduino Uno microcontroller, and free Reliance SCADA software. The Arduino Uno microcontroller collects data from sensors and communicates with a computer through a USB cable. Uno has been programmed to transmit data to Reliance SCADA on PC. In addition, Modbus library has been uploaded on Arduino to allow communication between the Arduino and our SCADA system by using the MODBUS RTU protocol. The results of the experiments demonstrate that SCADA works in real time and can be effectively used in monitoring a solar energy system. Khin Pyone Ei Aung | Nyan Phyo Aung | Lwin Lwin Htay "Monitoring and Control of Solar Power System using Reliance SCADA" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26459.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26459/monitoring-and-control-of-solar-power-system-using-reliance-scada/khin-pyone-ei-aung
Making model of dual axis solar tracking with Maximum Power Point Trackingijsrd.com
Now a days solar harvesting is more popular. As the popularity become higher the material quality and solar tracking methods are more improved. There are several factors affecting the solar system. Major influence on solar cell, intensity of source radiation and storage techniques The materials used in solar cell manufacturing limit the efficiency of solar cell. This makes it particularly difficult to make considerable improvements in the performance of the cell, and hence restricts the efficiency of the overall collection process. Therefore, the most attainable maximum power point tracking method of improving the performance of solar power collection is to increase the mean intensity of radiation received from the source used. The purposed of tracking system controls elevation and orientation angles of solar panels such that the panels always maintain perpendicular to the sunlight. The measured variables of our automatic system were compared with those of a fixed angle PV system. As a result of the experiment, the voltage generated by the proposed tracking system has an overall of about 28.11% more than the fixed angle PV system. There are three major approaches for maximizing power extraction in medium and large scale systems. They are sun tracking, maximum power point (MPP) tracking or both.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.