This document describes a remote health monitoring system using IoT (Internet of Things) and Arduino. The system collects health parameters like temperature, heart rate, and blood pressure from sensors and sends the data remotely to be viewed and analyzed. It notifies patients and doctors if any parameters exceed thresholds. The system is intended to help monitor patients outside of clinical settings and reduce healthcare costs. It discusses implementing the system using an Arduino microcontroller to process sensor data and an ESP8266 WiFi module to transmit data to a remote server. Results show the system can successfully post sensor readings online. The system provides a low-cost way to remotely monitor patients' health.
There are a number of scopes for IoT in order to make a difference in lives of patients. The devices can capture as well as monitor related data regarding patient and allows the providers to obtain the insights without bringing the patients visiting. The procedure can assist the patient results as well as preventing the possible communications for the process that involves risk. However, lack of electronic health record (EHR) system integration is one of the major issues faced while using IoT in healthcare. Some of the EHR systems allow the patients importing data into the record. However, it remains limited to a few dominant where the EHR players as well as leaves providers unspecific of the processing data that can be helpful for the organization to use the process. The challenges for interoperability in order to keep data in distinctive medical devices depend on the purpose and ordering physician.
There are a number of scopes for IoT in order to make a difference in lives of patients. The devices can capture as well as monitor related data regarding patient and allows the providers to obtain the insights without bringing the patients visiting. The procedure can assist the patient results as well as preventing the possible communications for the process that involves risk. However, lack of electronic health record (EHR) system integration is one of the major issues faced while using IoT in healthcare. Some of the EHR systems allow the patients importing data into the record. However, it remains limited to a few dominant where the EHR players as well as leaves providers unspecific of the processing data that can be helpful for the organization to use the process. The challenges for interoperability in order to keep data in distinctive medical devices depend on the purpose and ordering physician.
Survey of a Symptoms Monitoring System for Covid-19vivatechijri
The Internet of Things (IOT) depicts the organization of actual items that are implanted with sensors, programming, and different advances for the point of interfacing and trading information with different gadgets and frameworks over the web . In this day and age, there are numerous IOT based, these IOT based gadgets and machines range from wearable like brilliant watches to RFID stock following chips. IOT associated gadgets convey by means of organizations or cloud-based stages associated with the snare of Things. Among the applications that Internet of Things (IOT) encouraged to the planet , Healthcare applications are generally imperative . There are numerous wellbeing checking gadgets accessible. These framework comprises two sensors that is Heartbeat and blood heat sensor and furthermore contains Arduino UNO. This versatile gadget will screen heartbeat and blood heat utilizing sensors. The framework utilizes Arduino board which is associated with heart beat sensor and temperature sensor. The framework will take contribution from the guts beat and blood heat sensors and can send the data to Arduino. The Arduino will send the information of two sensors to LCD alphanumeric presentation . This presentation will show the perusing of the heartbeat sensor and blood heat sensor in BPM (Beats Per Minute) and in Celsius or Fahrenheit.
IOT Based Patient Health Monitoring System Using WIFIijtsrd
Health is given the extreme importance now a days by each country with the advent of the novel corona virus. So in this aspect, an IOT based patient health monitoring system is the best solution for such an epidemic. With an improvement in technology and miniaturization of sensors, there have been attempts to utilize the new technology in various areas to improve the quality of human life. As a result, this project is an attempt to solve a health care problem currently society is facing covid 19.The main objective of the project was to design for to reduce the corona virus, reduce the components and man power. The framework can be utilized to constantly screen the wellbeing parameters of a patient. The body temperature, heart rate and spo2 can be measured from anyplace on the globe utilizing IOT Internet of Things . IOT monitoring of health helps in preventing the spread of disease as well as to get a proper diagnosis of the state of health, even if the doctor is at far distance. We proposed a nonstop checking and control instrument to screen the patient condition and store the patient information’s in server utilizing Wi Fi Module based remote correspondence. Hence the proposed architecture collects the sensor data through ESP32 microcontroller and relays it to the WIFI where it is processed and analyzed for remote viewing. Feedback actions based on the analyzed data can be sent back to the doctor or guardian through Google sheet and or SMS alerts in case of any emergencies. Marupuri Usha Priya | Muthu Pandi K | Priya S | Dr. Kishore Kumar Arjunsingh "IOT Based Patient Health Monitoring System Using WIFI" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45143.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/45143/iot-based-patient-health-monitoring-system-using-wifi/marupuri-usha-priya
Real time health monitoring using gprs technologyRahul Sharma
Advances in sensor technology, personal mobile devices, and wireless broadband communications are enabling the development of an integrated personal mobile health monitoring system that can provide patients with a useful tool to assess their own health and manage their personal health information anytime and anywhere. Personal mobile devices, such as PDAs and mobile phones, are becoming more powerful integrated information management tools and play a major role in many people's lives. Here I focus on designing a Mobile health-monitoring system for people who stay alone at home or suffering from Heart Disease. This system presents a complete unified and mobile platform based connectivity solution for unobtrusive health monitoring. Developing a hardware which will sense heart rate and temperature of a patient, using Bluetooth modem all information lively transmitted to smart phone, from smart phone all information transmitted to server using GPRS. At server the received data compared with the standard threshold minimum and maximum value. The normal range of heart rate is 60 to 135 and the temperature of the patient is said to be normal above 95^F and below 104^F. If at all the rate increases above 145 or decreases below 55,it may be fatal and if it crossed this threshold limit then SMS will be sent to the relative of patient and Doctors along with measured values. The build-in GPS further provides the position information of the monitored person. The remote server not only collects physiological measurements but also tracks the position of the monitored person in real time. For transmitting data from Smartphone to the server using GPRS, here we need to create a website on data will be continuously transmitted from Smartphone to the website and from website data will be downloaded continuously on the server.
An efficient IoT based biomedical health monitoring and diagnosing system usi...TELKOMNIKA JOURNAL
With the growing and aging population, patient auto monitoring systems are becoming more popular. Smart sensors linked with the internet of things (IoT) make patients' auto monitoring system possible. Nowadays myRIO with LabVIEW is more popular for easy data acquisition, instrument control, and automation. This paper proposed myRIO and IoT based health monitoring and diagnosing system (HMDS) to acquire heartbeat rate, pulse, blood pressure (BP), temperature and activities of the patient using various smart sensors with more accuracy. The acquired raw data from the various sensors had been sent to the myRIO using ESP 8266 Wi-Fi module. The received raw data by the myRIO would be processed to the equivalent medical parameters using LabVIEW and the same might be transferred to the remote monitoring system (RMS) using cloud via a gateway. The abnormalities in the obtained data would be monitored and the diagnosis was made. The experimental setup was developed using various wearable sensors, ESP 8266, myRIO with LabVIEW and cloud with the gateway.
Internet of Things IoT Based Healthcare Monitoring System using NodeMCU and A...ijtsrd
Today Internet has become one of the important parts of daily life. It has changed how people live, work, play and learn. Internet serves for many purposes educations, finance, Business, Industries, Entertainment, Social Networking, etc. The IoT is connected objects to the Internet and used to control of those objects or remote monitoring. A health care monitoring system is necessary to constantly monitor the patient's physiological parameters. The main advantage of this system is that the results can be viewed at any time and place. The doctors can be notified by using mobile phones messages if patient health is abnormal. In this system, heartbeat sensor, temperature sensor and blood pressure sensor are used. The system can analyze the signal to detect normal or abnormal conditions. In the system, the internet of things IoT is becoming a major platform for many services and applications. The IoT is generally considered as connecting objects to the Internet and using that connection for control of those objects or remote monitoring. Khin Thet Wai | Nyan Phyo Aung | Lwin Lwin Htay "Internet of Things (IoT) Based Healthcare Monitoring System using NodeMCU and Arduino UNO" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26482.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26482/internet-of-things-iot-based-healthcare-monitoring-system-using-nodemcu-and-arduino-uno/khin-thet-wai
As elderly population increases day by day caretaking demands are also increasing. Hence patient health monitoring systems are gaining importance these days. This paper is based on monitoring of patients. We have designed and developed a reliable, energy efficient patient monitoring system. It is able to send parameters of patient in real time. It enables the doctors to monitor patient's health parameters (temp, heartbeat, ECG, position) in real time. In the current proposed system the patient health is continuously monitored using different sensors which is connected to the Arduino board. And the acquired data is send to the server using Ethernet shield attached to the Arduino board. If any of the parameter values goes beyond the threshold value an alert is given to the doctor using an Android application installed in the doctor’s smartphone.
Implementation Of Real Time IoT Based Health monitoring systemkchakrireddy
The main aim of this project is to interconnect the available medical resources and offer smart, reliable, and effective healthcare service to elderly people. Health monitoring for active and assisted living is one of the paradigms that can use the IOT advantages to improve the elderly lifestyle in this project we present an IOT architecture customized for healthcare applications. The proposed architecture collects the data and relays it to the cloud where it is processed and analyzed. Feedback actions based on the analyzed data can be sent back to the user.
Survey of a Symptoms Monitoring System for Covid-19vivatechijri
The Internet of Things (IOT) depicts the organization of actual items that are implanted with sensors, programming, and different advances for the point of interfacing and trading information with different gadgets and frameworks over the web . In this day and age, there are numerous IOT based, these IOT based gadgets and machines range from wearable like brilliant watches to RFID stock following chips. IOT associated gadgets convey by means of organizations or cloud-based stages associated with the snare of Things. Among the applications that Internet of Things (IOT) encouraged to the planet , Healthcare applications are generally imperative . There are numerous wellbeing checking gadgets accessible. These framework comprises two sensors that is Heartbeat and blood heat sensor and furthermore contains Arduino UNO. This versatile gadget will screen heartbeat and blood heat utilizing sensors. The framework utilizes Arduino board which is associated with heart beat sensor and temperature sensor. The framework will take contribution from the guts beat and blood heat sensors and can send the data to Arduino. The Arduino will send the information of two sensors to LCD alphanumeric presentation . This presentation will show the perusing of the heartbeat sensor and blood heat sensor in BPM (Beats Per Minute) and in Celsius or Fahrenheit.
IOT Based Patient Health Monitoring System Using WIFIijtsrd
Health is given the extreme importance now a days by each country with the advent of the novel corona virus. So in this aspect, an IOT based patient health monitoring system is the best solution for such an epidemic. With an improvement in technology and miniaturization of sensors, there have been attempts to utilize the new technology in various areas to improve the quality of human life. As a result, this project is an attempt to solve a health care problem currently society is facing covid 19.The main objective of the project was to design for to reduce the corona virus, reduce the components and man power. The framework can be utilized to constantly screen the wellbeing parameters of a patient. The body temperature, heart rate and spo2 can be measured from anyplace on the globe utilizing IOT Internet of Things . IOT monitoring of health helps in preventing the spread of disease as well as to get a proper diagnosis of the state of health, even if the doctor is at far distance. We proposed a nonstop checking and control instrument to screen the patient condition and store the patient information’s in server utilizing Wi Fi Module based remote correspondence. Hence the proposed architecture collects the sensor data through ESP32 microcontroller and relays it to the WIFI where it is processed and analyzed for remote viewing. Feedback actions based on the analyzed data can be sent back to the doctor or guardian through Google sheet and or SMS alerts in case of any emergencies. Marupuri Usha Priya | Muthu Pandi K | Priya S | Dr. Kishore Kumar Arjunsingh "IOT Based Patient Health Monitoring System Using WIFI" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45143.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/45143/iot-based-patient-health-monitoring-system-using-wifi/marupuri-usha-priya
Real time health monitoring using gprs technologyRahul Sharma
Advances in sensor technology, personal mobile devices, and wireless broadband communications are enabling the development of an integrated personal mobile health monitoring system that can provide patients with a useful tool to assess their own health and manage their personal health information anytime and anywhere. Personal mobile devices, such as PDAs and mobile phones, are becoming more powerful integrated information management tools and play a major role in many people's lives. Here I focus on designing a Mobile health-monitoring system for people who stay alone at home or suffering from Heart Disease. This system presents a complete unified and mobile platform based connectivity solution for unobtrusive health monitoring. Developing a hardware which will sense heart rate and temperature of a patient, using Bluetooth modem all information lively transmitted to smart phone, from smart phone all information transmitted to server using GPRS. At server the received data compared with the standard threshold minimum and maximum value. The normal range of heart rate is 60 to 135 and the temperature of the patient is said to be normal above 95^F and below 104^F. If at all the rate increases above 145 or decreases below 55,it may be fatal and if it crossed this threshold limit then SMS will be sent to the relative of patient and Doctors along with measured values. The build-in GPS further provides the position information of the monitored person. The remote server not only collects physiological measurements but also tracks the position of the monitored person in real time. For transmitting data from Smartphone to the server using GPRS, here we need to create a website on data will be continuously transmitted from Smartphone to the website and from website data will be downloaded continuously on the server.
An efficient IoT based biomedical health monitoring and diagnosing system usi...TELKOMNIKA JOURNAL
With the growing and aging population, patient auto monitoring systems are becoming more popular. Smart sensors linked with the internet of things (IoT) make patients' auto monitoring system possible. Nowadays myRIO with LabVIEW is more popular for easy data acquisition, instrument control, and automation. This paper proposed myRIO and IoT based health monitoring and diagnosing system (HMDS) to acquire heartbeat rate, pulse, blood pressure (BP), temperature and activities of the patient using various smart sensors with more accuracy. The acquired raw data from the various sensors had been sent to the myRIO using ESP 8266 Wi-Fi module. The received raw data by the myRIO would be processed to the equivalent medical parameters using LabVIEW and the same might be transferred to the remote monitoring system (RMS) using cloud via a gateway. The abnormalities in the obtained data would be monitored and the diagnosis was made. The experimental setup was developed using various wearable sensors, ESP 8266, myRIO with LabVIEW and cloud with the gateway.
Internet of Things IoT Based Healthcare Monitoring System using NodeMCU and A...ijtsrd
Today Internet has become one of the important parts of daily life. It has changed how people live, work, play and learn. Internet serves for many purposes educations, finance, Business, Industries, Entertainment, Social Networking, etc. The IoT is connected objects to the Internet and used to control of those objects or remote monitoring. A health care monitoring system is necessary to constantly monitor the patient's physiological parameters. The main advantage of this system is that the results can be viewed at any time and place. The doctors can be notified by using mobile phones messages if patient health is abnormal. In this system, heartbeat sensor, temperature sensor and blood pressure sensor are used. The system can analyze the signal to detect normal or abnormal conditions. In the system, the internet of things IoT is becoming a major platform for many services and applications. The IoT is generally considered as connecting objects to the Internet and using that connection for control of those objects or remote monitoring. Khin Thet Wai | Nyan Phyo Aung | Lwin Lwin Htay "Internet of Things (IoT) Based Healthcare Monitoring System using NodeMCU and Arduino UNO" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26482.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26482/internet-of-things-iot-based-healthcare-monitoring-system-using-nodemcu-and-arduino-uno/khin-thet-wai
As elderly population increases day by day caretaking demands are also increasing. Hence patient health monitoring systems are gaining importance these days. This paper is based on monitoring of patients. We have designed and developed a reliable, energy efficient patient monitoring system. It is able to send parameters of patient in real time. It enables the doctors to monitor patient's health parameters (temp, heartbeat, ECG, position) in real time. In the current proposed system the patient health is continuously monitored using different sensors which is connected to the Arduino board. And the acquired data is send to the server using Ethernet shield attached to the Arduino board. If any of the parameter values goes beyond the threshold value an alert is given to the doctor using an Android application installed in the doctor’s smartphone.
Implementation Of Real Time IoT Based Health monitoring systemkchakrireddy
The main aim of this project is to interconnect the available medical resources and offer smart, reliable, and effective healthcare service to elderly people. Health monitoring for active and assisted living is one of the paradigms that can use the IOT advantages to improve the elderly lifestyle in this project we present an IOT architecture customized for healthcare applications. The proposed architecture collects the data and relays it to the cloud where it is processed and analyzed. Feedback actions based on the analyzed data can be sent back to the user.
Integrated healthcare monitoring device for obese adults using internet of th...IJECEIAES
Obesity is a global epidemic, often considered an impending disaster for the world’s population. Healthcare organizations and professionals repeatedly emphasize the negative impacts on obesity in the development of cardiovascular diseases, hypertension and diabetes. The continuous monitoring of physiological parameters; namely SpO2, blood pressure, body temperature and pulse rate are imperative for obese adult patients. IoT is a dynamic field, used extensively in all fields: agriculture, automobile, manufacturing and retail industry primarily for automated remote real- time monitoring. This paper focuses on the implementation of IoT in the healthcare industry for monitoring and evaluating health conditions of obese adults, along with emphasis on the importance of medical data storage. Furthermore, a device is developed with a novel design and system, which not only allows real-time monitoring but also the storage of medical records for multiple patients simultaneously. The device facilitates measurements of these parameters using an Arduino environment and then transmits the data onto an IoT dashboard using a Wi-fi module for remote monitoring for healthcare professionals. The main aim is to provide a suitable device recommended by doctors for patients suffering from obesity, such that doctors can examine patient’s health trends over a period from the stored data for monitoring any changes that could be a symptom of an underlying unnoticed health condition.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.