This document summarizes a research paper on a fuel theft detection and location tracing system using Internet of Things. It discusses how the current framework has low accuracy in detecting fuel theft from vehicle tanks. The proposed system uses a flow sensor to calculate the amount of fuel filled and an ultrasonic sensor to continuously monitor the fuel level. If a sudden drop in fuel level is detected, the system will ring an alarm and notify the vehicle owner. It also allows fraudulent activities to be directly reported to authorities. The system stores historical data for future use.
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
Since the development of advanced metering and digital technology, Smart City has been equipped based on things IOT in different electronic devices, and therefore smarter than before. The purpose of this paper is to carry out the concept of smart cities and their motivation and application of a comprehensive review. In addition, the survey describes the intelligent networking technology and smart cities and major components of urban functions. This also explains the major challenges and experiences around the world. Mukesh Kumawat | Mr. Durgesh Kumar | Dr. Garima Mathur ""IOT Based Smart Cities"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23246.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23246/iot-based-smart-cities/mukesh-kumawat
Challenges and Solutions for Advanced Sensing of
Water Infrastructures in Urban Environments. Presentation of Suciu et al. at 21. IEEE international symposium for design and technology in electronic packaging (SIITME).
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
Since the development of advanced metering and digital technology, Smart City has been equipped based on things IOT in different electronic devices, and therefore smarter than before. The purpose of this paper is to carry out the concept of smart cities and their motivation and application of a comprehensive review. In addition, the survey describes the intelligent networking technology and smart cities and major components of urban functions. This also explains the major challenges and experiences around the world. Mukesh Kumawat | Mr. Durgesh Kumar | Dr. Garima Mathur ""IOT Based Smart Cities"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23246.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23246/iot-based-smart-cities/mukesh-kumawat
Challenges and Solutions for Advanced Sensing of
Water Infrastructures in Urban Environments. Presentation of Suciu et al. at 21. IEEE international symposium for design and technology in electronic packaging (SIITME).
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
IoT Based Water Management and Supervision SystemKaushik Gupta
Final Year Project
IoT Based Water Management and Supervision System -2019
Certification: Thakur Polytechnic
More Details on https://www.kaushikgupta.in
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
Project report on Iot Based Garbage Monitoring System alok pal
This is an innovative project idea which is based on Internet of Things,which will be helpful to keep the city clean.This system monitors garbage level in the garbage bins and informs about the level of garbage collected in the bin via web page. In this project we are using garbage Monitoring concept with help of DHT11 sensor and Ultrasonic sensors and Mediatek Linkit One Board,MQTT protocol is used to publish the status of garbage bin to the cloud,which can be accessed by respective Authorities
This is a project report on Smart Dustbin Using IOT Prepared By Lakshya Pandey, Second Year Electrical Engineering Student of Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
All Rights Reserved.
Thank you very much for checking out my presentation.
If you are a student or a faculty of an engineering college and need to create a presentation, you can contact me. Check out my profile to know how.
This project describes about a device, which measures the power consumed by our household devices, using IoT technology.
On detecting and identifying faulty internet of things devices and outagesjournalBEEI
As internet of things (IoT) devices play an integral role in our everyday life, it is critical to monitor the health of the IoT devices. However, fault detection in IoT is much more challenging compared with that in traditional wired networks. Traditional observing and polling are not appropriate for detecting faults in resource-constrained IoT devices. Because of the dynamic feature of IoT devices, these detection methods are inadequate for IoT fault detection. In this paper, we propose two methods that can monitor the health status of IoT devices through monitoring the network traffic of these devices. Based on the collected traffic or flow entropy, these methods can determine the health status of IoT devices by comparing captured traffic behavior with normal traffic patterns. Our measurements show that the two methods can effectively detect and identify malfunctioned or defective IoT devices.
Internet of Things IoT conceptualizes the idea of remotely connecting and monitoring real world objects things through the Internet. When it comes to a house, this concept can be aptly incorporated to make it smarter, safer and automated. This project presents an approach to incorporate a two level biometric based security system in deploying Internet of Things IoT for smart home system, together with due consideration given to user convenience in operating the system using an android based application to monitor, control the electronic appliances in the house. The objective of the proposed system is to ensure that the access to enter the house and thereby render the services of certain automated electronic applications are only by the legitimate users, and not anyone else. By using biometrics it is possible to confirm or establish an individual's identity. Biometrics has the potential to make authentication dramatically faster, easier and more secure than traditional passwords. This project adds mainly four features security, safety, control and monitoring to home automation. This approach ensures to provide all the operations done smartly thus avoiding any manual interventions until necessary. This project differentiates itself from others as it provides a low cost effective, compact and reliable secured home control and monitoring system with the aid of biometric fingerprint authentication and biometric face recognition systems for access and to control the equipment and devices remotely using an application over a portable Android device. The proposed system is implemented on atmega328 based arduino microcontroller board. Face recognition is achieved using matlab. Dr. B. Kedarnath | M. Lalitha Priya | G. Anusha | K. Vamshi "A Secure IoT Enabled Smart Home System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31010.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31010/a-secure-iot-enabled-smart-home-system/dr-b-kedarnath
Wildlife entering in to populated areas has
recently become very Popular. The space for wild
animals is decreasing as humans are encroaching
forests. It creates great loss to property and life
when wild animals enter in to cities. We use latest
advances in technology such as Internet of Things
(IoT) to create an alert system of possible wildlife
leaving the forest and also the message will send to
the users Mobile to alert them. We use low cost
motion detectors and Passive Infrared sensors to
achieve this. We relay information of such motion
to a control centre to take further actions. We also
include making loud noise through speakers in
which the animals cannot enter in to land. The
basic idea of IoT is to connect different sensors
and establish communication and also provide
services. In this article, we make use of several IoT
devices at the periphery of natural reserve to
create an alert system. This system can also be
used to find out smugglers and other people
illegally entering in to the forest.
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
IoT Based Water Management and Supervision SystemKaushik Gupta
Final Year Project
IoT Based Water Management and Supervision System -2019
Certification: Thakur Polytechnic
More Details on https://www.kaushikgupta.in
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
Project report on Iot Based Garbage Monitoring System alok pal
This is an innovative project idea which is based on Internet of Things,which will be helpful to keep the city clean.This system monitors garbage level in the garbage bins and informs about the level of garbage collected in the bin via web page. In this project we are using garbage Monitoring concept with help of DHT11 sensor and Ultrasonic sensors and Mediatek Linkit One Board,MQTT protocol is used to publish the status of garbage bin to the cloud,which can be accessed by respective Authorities
This is a project report on Smart Dustbin Using IOT Prepared By Lakshya Pandey, Second Year Electrical Engineering Student of Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
All Rights Reserved.
Thank you very much for checking out my presentation.
If you are a student or a faculty of an engineering college and need to create a presentation, you can contact me. Check out my profile to know how.
This project describes about a device, which measures the power consumed by our household devices, using IoT technology.
On detecting and identifying faulty internet of things devices and outagesjournalBEEI
As internet of things (IoT) devices play an integral role in our everyday life, it is critical to monitor the health of the IoT devices. However, fault detection in IoT is much more challenging compared with that in traditional wired networks. Traditional observing and polling are not appropriate for detecting faults in resource-constrained IoT devices. Because of the dynamic feature of IoT devices, these detection methods are inadequate for IoT fault detection. In this paper, we propose two methods that can monitor the health status of IoT devices through monitoring the network traffic of these devices. Based on the collected traffic or flow entropy, these methods can determine the health status of IoT devices by comparing captured traffic behavior with normal traffic patterns. Our measurements show that the two methods can effectively detect and identify malfunctioned or defective IoT devices.
Internet of Things IoT conceptualizes the idea of remotely connecting and monitoring real world objects things through the Internet. When it comes to a house, this concept can be aptly incorporated to make it smarter, safer and automated. This project presents an approach to incorporate a two level biometric based security system in deploying Internet of Things IoT for smart home system, together with due consideration given to user convenience in operating the system using an android based application to monitor, control the electronic appliances in the house. The objective of the proposed system is to ensure that the access to enter the house and thereby render the services of certain automated electronic applications are only by the legitimate users, and not anyone else. By using biometrics it is possible to confirm or establish an individual's identity. Biometrics has the potential to make authentication dramatically faster, easier and more secure than traditional passwords. This project adds mainly four features security, safety, control and monitoring to home automation. This approach ensures to provide all the operations done smartly thus avoiding any manual interventions until necessary. This project differentiates itself from others as it provides a low cost effective, compact and reliable secured home control and monitoring system with the aid of biometric fingerprint authentication and biometric face recognition systems for access and to control the equipment and devices remotely using an application over a portable Android device. The proposed system is implemented on atmega328 based arduino microcontroller board. Face recognition is achieved using matlab. Dr. B. Kedarnath | M. Lalitha Priya | G. Anusha | K. Vamshi "A Secure IoT Enabled Smart Home System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31010.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31010/a-secure-iot-enabled-smart-home-system/dr-b-kedarnath
Wildlife entering in to populated areas has
recently become very Popular. The space for wild
animals is decreasing as humans are encroaching
forests. It creates great loss to property and life
when wild animals enter in to cities. We use latest
advances in technology such as Internet of Things
(IoT) to create an alert system of possible wildlife
leaving the forest and also the message will send to
the users Mobile to alert them. We use low cost
motion detectors and Passive Infrared sensors to
achieve this. We relay information of such motion
to a control centre to take further actions. We also
include making loud noise through speakers in
which the animals cannot enter in to land. The
basic idea of IoT is to connect different sensors
and establish communication and also provide
services. In this article, we make use of several IoT
devices at the periphery of natural reserve to
create an alert system. This system can also be
used to find out smugglers and other people
illegally entering in to the forest.
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
In this era of Digitization and Automation, the life of human beings is getting simpler as almost everything is automatic, replacing the old manual systems. Nowadays humans have made internet an integral part of their everyday life without which they are helpless. Internet of things IOT provides a platform that allows devices to connect, sensed and controlled remotely across a network infrastructure. Our project basically focuses on Laboratory automation using smart phone and computer. The IOT devices controls and monitors the electronic electrical and the mechanical systems used in various types of buildings. The devices connected to the cloud server are controlled by a single admin which facilitate a number of users to which a number of sensor and control nodes are connected. The system designed is economical and can be expanded as it allows connection and controlling of a number of different devices. Deepak Adhav | Rahul Pagar | Ravi Sonawane | Sachin Tawade ""Smart Laboratory"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd22840.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/22840/smart-laboratory/deepak-adhav
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.