This document describes an automatic toll collection system based on embedded Linux. The system uses a Raspberry Pi board with a camera to capture images of vehicle license plates. It then uses an optical character recognition engine to extract the license plate text. This text is sent to a database to retrieve vehicle information and deduct the appropriate toll amount from the owner's registered account. A notification is sent via SMS to inform the owner of the deduction. If payment is successful, a barrier is opened to let the vehicle pass through the toll booth automatically without stopping. The system aims to make toll collection more efficient and reduce traffic congestion compared to existing manual systems.
Toll gate Automation and Vehicle Tracking is designed to automatically keep track of the vehicle’s movement, record the time and the details like Owner’s name, date of registration, vehicle model etc. This system is very useful for automatic vehicle tracking, time management and also for automation of Toll gate. This paper explains the implementation of Toll Gate Automation which is a step towards improving the Tracking & monitoring of vehicles, traveling in predetermined routes. In this system, a computerized system automatically identifies an approaching vehicle and records the vehicle number & Time. If the vehicle belongs to the authorized person/group, it automatically opens the Toll Gate and a predetermined amount is automatically deducted from its account.
A Smart Approach to Number Plate Recognition in Tollgate System using FPGAijsrd.com
This paper reveals about the design and development of smart card for automated toll collection through number plate recognition. Since it is simpler and faster than the traditional token based ticket system, it has all the potential to replace the existing system. Moreover, it saves users valuable time by reducing the queue length in front of the toll counter. It is used to pay the amount automatically and open & close the toll gate automatically. We aim to reduce the time consumed to pay the toll gate amount and also to help the police department to trace the vehicle, incase if it was stolen or used for any illegal activities. As well as we are going to increase the security features in the toll gate because now a day's toll gate are the entrance to the main cities. If the Vehicle passed before paying the money the buzzer will automatically ring & the alert will be given to the police also. If any vehicle carries suspicious gas means the buzzer will ring so improved security than the existing systems. The entire system is developed as hardware based system using SPARTAN3 FPGA kit and associated devices. The software for this system has been developed using VHDL language developed in the Xilinx tool.
Project Report- RFID Based Automated Toll Collection System using Arduino @ A...Aman Gupta
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
ATCS usually known as “Automated Toll Collection System” is a new technology for collecting toll in a faster and more efficient way. It is a great alternative to long waiting at manual toll plazas. In order to overcome the wastage of time and fuel at same time we have come up with a concept of RFID based automated toll collection system using Arduino. RFID stands for Radio Frequency Identification; these cards are unique identities provided to every vehicle by Registration Office at each city. Whenever a vehicle with such Unique ID reaches the toll plaza, the RFID card reader attached on the toll plaza gate reads the card and transfers the unique ID to Arduino ATmega 328. Accordingly, the processor works and deducts a fixed money from the prepaid card. If the card’s ID is valid and has sufficient balance, the processor will command the DC motor to start and open the gate, letting the vehicle to pass. On passing from the gate the screen will show the deducted and current balance of the card. If the card is not valid or low in balance, it will prompt to move the vehicle to manual toll collection lane. Furthermore, a message will be sent to the owner’s registered mobile number with the same details along with the location of the toll booth.
Automated Toll Collection System used for collecting tax automatically from the moving vehicle. Here we do the identification with the help of radio
frequency. A vehicle will hold an RFID tag. This tag contains unique identification number. This unique identification number will be assigned by
RTO or traffic governing authority. Reader will be strategically placed at toll collection center. Whenever the vehicle passes the toll collection center,
the tax amount will be deducted automatically from his prepaid balance. New balance will be updated in his account. Incase if one has insufficient
balance, his updated balance will be negative one and the warning message will be send to the user. As vehicles don‟t have to stop in a queue, it
assures time saving, fuel conservation, avoid traffic congestions and also contributing in saving of money.
Automatic Toll Collection by using mobile phonesilent_god
Many highways in India are having toll booth to collect toll tax. There is a manual method existing of hand written or computerized toll ticket issuing & collecting cash from Toll road user (like truck, car, bus etc). This method has many limitations & weaknesses. In India, government is planning for RFID tag based toll collection, which is expensive & time consuming.
This method of "Mobile Phone Based Automatic Toll Collection" is a simple to deploy method for toll collection & uses readily available
Electronic Ticketing System for Public Transport System using NFC TechnologyPravin Dorugade
In this the main aim is to introduce a new ticketing system for the BUS system. This system will make use of the Near Field Communication technology along with the mobile phone (Android and GPRS Enabled) to carry out the ticketing transactions. The NFC Ticketing application combines latest-generation technologies such as Near Filed Communication (NFC). The Near Filed Communication (NFC) is used in such service which integrates mobile tickets and mobile payments. By using this technology, travel card readers cannot distinguish the mobile phone from travel card. Mobile phone works as a travel card even when battery is depleted.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Toll gate Automation and Vehicle Tracking is designed to automatically keep track of the vehicle’s movement, record the time and the details like Owner’s name, date of registration, vehicle model etc. This system is very useful for automatic vehicle tracking, time management and also for automation of Toll gate. This paper explains the implementation of Toll Gate Automation which is a step towards improving the Tracking & monitoring of vehicles, traveling in predetermined routes. In this system, a computerized system automatically identifies an approaching vehicle and records the vehicle number & Time. If the vehicle belongs to the authorized person/group, it automatically opens the Toll Gate and a predetermined amount is automatically deducted from its account.
A Smart Approach to Number Plate Recognition in Tollgate System using FPGAijsrd.com
This paper reveals about the design and development of smart card for automated toll collection through number plate recognition. Since it is simpler and faster than the traditional token based ticket system, it has all the potential to replace the existing system. Moreover, it saves users valuable time by reducing the queue length in front of the toll counter. It is used to pay the amount automatically and open & close the toll gate automatically. We aim to reduce the time consumed to pay the toll gate amount and also to help the police department to trace the vehicle, incase if it was stolen or used for any illegal activities. As well as we are going to increase the security features in the toll gate because now a day's toll gate are the entrance to the main cities. If the Vehicle passed before paying the money the buzzer will automatically ring & the alert will be given to the police also. If any vehicle carries suspicious gas means the buzzer will ring so improved security than the existing systems. The entire system is developed as hardware based system using SPARTAN3 FPGA kit and associated devices. The software for this system has been developed using VHDL language developed in the Xilinx tool.
Project Report- RFID Based Automated Toll Collection System using Arduino @ A...Aman Gupta
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
ATCS usually known as “Automated Toll Collection System” is a new technology for collecting toll in a faster and more efficient way. It is a great alternative to long waiting at manual toll plazas. In order to overcome the wastage of time and fuel at same time we have come up with a concept of RFID based automated toll collection system using Arduino. RFID stands for Radio Frequency Identification; these cards are unique identities provided to every vehicle by Registration Office at each city. Whenever a vehicle with such Unique ID reaches the toll plaza, the RFID card reader attached on the toll plaza gate reads the card and transfers the unique ID to Arduino ATmega 328. Accordingly, the processor works and deducts a fixed money from the prepaid card. If the card’s ID is valid and has sufficient balance, the processor will command the DC motor to start and open the gate, letting the vehicle to pass. On passing from the gate the screen will show the deducted and current balance of the card. If the card is not valid or low in balance, it will prompt to move the vehicle to manual toll collection lane. Furthermore, a message will be sent to the owner’s registered mobile number with the same details along with the location of the toll booth.
Automated Toll Collection System used for collecting tax automatically from the moving vehicle. Here we do the identification with the help of radio
frequency. A vehicle will hold an RFID tag. This tag contains unique identification number. This unique identification number will be assigned by
RTO or traffic governing authority. Reader will be strategically placed at toll collection center. Whenever the vehicle passes the toll collection center,
the tax amount will be deducted automatically from his prepaid balance. New balance will be updated in his account. Incase if one has insufficient
balance, his updated balance will be negative one and the warning message will be send to the user. As vehicles don‟t have to stop in a queue, it
assures time saving, fuel conservation, avoid traffic congestions and also contributing in saving of money.
Automatic Toll Collection by using mobile phonesilent_god
Many highways in India are having toll booth to collect toll tax. There is a manual method existing of hand written or computerized toll ticket issuing & collecting cash from Toll road user (like truck, car, bus etc). This method has many limitations & weaknesses. In India, government is planning for RFID tag based toll collection, which is expensive & time consuming.
This method of "Mobile Phone Based Automatic Toll Collection" is a simple to deploy method for toll collection & uses readily available
Electronic Ticketing System for Public Transport System using NFC TechnologyPravin Dorugade
In this the main aim is to introduce a new ticketing system for the BUS system. This system will make use of the Near Field Communication technology along with the mobile phone (Android and GPRS Enabled) to carry out the ticketing transactions. The NFC Ticketing application combines latest-generation technologies such as Near Filed Communication (NFC). The Near Filed Communication (NFC) is used in such service which integrates mobile tickets and mobile payments. By using this technology, travel card readers cannot distinguish the mobile phone from travel card. Mobile phone works as a travel card even when battery is depleted.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Comparative Study of Convolution Based Inpainting Algorithmsijsrd.com
Image Inpainting refers to restoring a damaged image in such a manner that manipulation and modification in an image is not recognizable by the observer. In this paper we have simulated and compared results of two different existing algorithms that are based on convolution as given by Oliveira and Hadhoud. The algorithm given by Hadhoud gives faster results but produces strokes in the resultant image while algorithm given by Oliveira is slow but fills the region from all the sides.
Nowadays vehicles are important in our day to day life. Our transportation methods mainly depend on vehicles, as per the need increases the care for the vehicle also increases, but in this busy life we fail to give much attention to the vehicle. This results in the major mechanical problems in the vehicle. Due to the busy schedule, people fail to give servicing to the car at the proper time. People forget to check the battery voltage and engine temperature. To avoid such problems our system helps the user to take good care of his vehicle by monitoring the vehicle parameters like fuel level, engine temperature and battery voltage. It also checks whether the driver is drunk or not. It gives the servicing alerts to the driver.
This presentation is all about Electronic Toll Collection, in this i define history of ETC, Technology used is fastag. and Advantage and disadvantage of using fastag
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.