This document describes an automated tollgate system using image processing and online payment. The system uses a camera at the tollgate to capture an image of the vehicle's license plate. Image processing techniques are used to recognize the license plate number, which is then compared to a database of registered vehicle numbers linked to online payment accounts. If the license plate number matches a registered number, the toll amount is deducted from the associated online payment account. This system aims to make toll collection more convenient by eliminating queues and allowing drivers to pass through the tollgate without stopping to pay cash. It is proposed to reduce congestion and waste of time at toll plazas.
Smart Mobile Roadside Park Charging SystemsIJMREMJournal
Currently, roadside parking charging is mainly operated manually. However, this makes it difficult to achieve
effective management. Aimed at removing many inconveniences brought by this current approach, this study
discusses how to apply Radio Frequency Identification (RFID) in this issue. The RFID reader can be installed
on a track. Through the track, the RFID reader can detect a whole row of parking spaces along the sides of the
road and therefore, can replace the current approach with which people hold machines to scan cars one by one.
Both parkers and managers of the parking system can use an online platform which offers an open individual
inquiry system and impartial and accurate reflection of the real-time status and ensures a fair process of issuing
parking tickets.
Automated Toll Collection System used for collecting tax automatically from the moving vehicle. Here we do the identification with the help of radio
frequency. A vehicle will hold an RFID tag. This tag contains unique identification number. This unique identification number will be assigned by
RTO or traffic governing authority. Reader will be strategically placed at toll collection center. Whenever the vehicle passes the toll collection center,
the tax amount will be deducted automatically from his prepaid balance. New balance will be updated in his account. Incase if one has insufficient
balance, his updated balance will be negative one and the warning message will be send to the user. As vehicles don‟t have to stop in a queue, it
assures time saving, fuel conservation, avoid traffic congestions and also contributing in saving of money.
Project Report- RFID Based Automated Toll Collection System using Arduino @ A...Aman Gupta
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
ATCS usually known as “Automated Toll Collection System” is a new technology for collecting toll in a faster and more efficient way. It is a great alternative to long waiting at manual toll plazas. In order to overcome the wastage of time and fuel at same time we have come up with a concept of RFID based automated toll collection system using Arduino. RFID stands for Radio Frequency Identification; these cards are unique identities provided to every vehicle by Registration Office at each city. Whenever a vehicle with such Unique ID reaches the toll plaza, the RFID card reader attached on the toll plaza gate reads the card and transfers the unique ID to Arduino ATmega 328. Accordingly, the processor works and deducts a fixed money from the prepaid card. If the card’s ID is valid and has sufficient balance, the processor will command the DC motor to start and open the gate, letting the vehicle to pass. On passing from the gate the screen will show the deducted and current balance of the card. If the card is not valid or low in balance, it will prompt to move the vehicle to manual toll collection lane. Furthermore, a message will be sent to the owner’s registered mobile number with the same details along with the location of the toll booth.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
An Overview of Parking Slot Detection Techniquesijtsrd
The aim of this study is to design and implement an automatic parking system to increase parking usability and safety and to collect parking fees for vehicles without having to use a magnetic card. A clever car park system can work with fewer human connections and does not need a magnetic card. There is also a parking assistance system that can advise and guide the user to the correct car park. In order to detect the number plates for the parking and payment system, the system used image processing. In general, the systems use pre programmed controls to ensure that at least one person is involved in the parking system and control access to restricted areas. Ashu Yadav | Kirti Bhatia | Rohini Sharma "An Overview of Parking Slot Detection Techniques" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46321.pdf Paper URL: https://www.ijtsrd.com/computer-science/realtime-computing/46321/an-overview-of-parking-slot-detection-techniques/ashu-yadav
Smart Mobile Roadside Park Charging SystemsIJMREMJournal
Currently, roadside parking charging is mainly operated manually. However, this makes it difficult to achieve
effective management. Aimed at removing many inconveniences brought by this current approach, this study
discusses how to apply Radio Frequency Identification (RFID) in this issue. The RFID reader can be installed
on a track. Through the track, the RFID reader can detect a whole row of parking spaces along the sides of the
road and therefore, can replace the current approach with which people hold machines to scan cars one by one.
Both parkers and managers of the parking system can use an online platform which offers an open individual
inquiry system and impartial and accurate reflection of the real-time status and ensures a fair process of issuing
parking tickets.
Automated Toll Collection System used for collecting tax automatically from the moving vehicle. Here we do the identification with the help of radio
frequency. A vehicle will hold an RFID tag. This tag contains unique identification number. This unique identification number will be assigned by
RTO or traffic governing authority. Reader will be strategically placed at toll collection center. Whenever the vehicle passes the toll collection center,
the tax amount will be deducted automatically from his prepaid balance. New balance will be updated in his account. Incase if one has insufficient
balance, his updated balance will be negative one and the warning message will be send to the user. As vehicles don‟t have to stop in a queue, it
assures time saving, fuel conservation, avoid traffic congestions and also contributing in saving of money.
Project Report- RFID Based Automated Toll Collection System using Arduino @ A...Aman Gupta
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
ATCS usually known as “Automated Toll Collection System” is a new technology for collecting toll in a faster and more efficient way. It is a great alternative to long waiting at manual toll plazas. In order to overcome the wastage of time and fuel at same time we have come up with a concept of RFID based automated toll collection system using Arduino. RFID stands for Radio Frequency Identification; these cards are unique identities provided to every vehicle by Registration Office at each city. Whenever a vehicle with such Unique ID reaches the toll plaza, the RFID card reader attached on the toll plaza gate reads the card and transfers the unique ID to Arduino ATmega 328. Accordingly, the processor works and deducts a fixed money from the prepaid card. If the card’s ID is valid and has sufficient balance, the processor will command the DC motor to start and open the gate, letting the vehicle to pass. On passing from the gate the screen will show the deducted and current balance of the card. If the card is not valid or low in balance, it will prompt to move the vehicle to manual toll collection lane. Furthermore, a message will be sent to the owner’s registered mobile number with the same details along with the location of the toll booth.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
An Overview of Parking Slot Detection Techniquesijtsrd
The aim of this study is to design and implement an automatic parking system to increase parking usability and safety and to collect parking fees for vehicles without having to use a magnetic card. A clever car park system can work with fewer human connections and does not need a magnetic card. There is also a parking assistance system that can advise and guide the user to the correct car park. In order to detect the number plates for the parking and payment system, the system used image processing. In general, the systems use pre programmed controls to ensure that at least one person is involved in the parking system and control access to restricted areas. Ashu Yadav | Kirti Bhatia | Rohini Sharma "An Overview of Parking Slot Detection Techniques" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46321.pdf Paper URL: https://www.ijtsrd.com/computer-science/realtime-computing/46321/an-overview-of-parking-slot-detection-techniques/ashu-yadav
Electronic Toll Collection System based on Radio Frequency Identification Sys...IJECEIAES
This papaer entitled electronic toll collection system based on Radio Frequncy Identification System explained in detail based on current issue at toll collection system. There are some obstacles faced every day where the users spent their valuable time in queue at tollgate due to traffic congestion as well as using traditional manual method in most existing toll ETC system to collect toll from road users. Besides that, the barrier design where each vehicle stop waiting until barrier lift which consider source of time delay. To tackle stated problems, an electronic toll collection system is proposed which based on RFID technology. The integrated system consists of two main sections, electronic sides where all input data received from while database management office is where all necessary information stored. To compare the current ETC system, in this research elaborated internet of things where all data transmit through cloud and then to the main office in real time. Not only that, there is some enhancement based on barrier design where, gate is remained open for all vehicles with sufficient tags without requiring to stop to eliminate time delay.By check system throughput compare to existing toll systems, various tests have been carried out in different method where proposed system throughput much higher percentage the current system.
Automatic toll collection using optical code recognition and encryptioneSAT Journals
Abstract Automatic Toll Collection Using Optical Code Recognition and Encryption provides an alternative to the current existing toll collections techniques and tries to overcome the drawbacks of these system. In this system, the number plate of a particular vehicle is encrypted using DES algorithm and an OCR code is generated out of it. This code is used as sticker on the car windshield. High Definition (HD) cameras capture this code and image processing is performed using Open CV functions on the code. It is then matched in the database. If matched, the tax is debited from the users account and the vehicle is allowed to pass within seconds. If the balance is insufficient then only once pass is allowed. After that the payment has to be made manually. An additional feature that supports this system is that if a vehicle is stolen and an entry is being made in the central database for the same by the police then if the vehicle passes through the toll plaza, a silent alarm would buzz which would indicate the operator at the toll booth that the vehicle is a stolen vehicle. Keywords: Open CV, OCR, Encryption, Image Processing, DES Algorithm
This presentation is all about Electronic Toll Collection, in this i define history of ETC, Technology used is fastag. and Advantage and disadvantage of using fastag
Similar to IRJET- Automated Tollgate System Using Online Payment And Image Processing (18)
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.