This document summarizes an embedded system project that aims to automate the manual transmission on motorcycles. The system uses an AVR microcontroller programmed in C to control relays and a stepper motor based on input from a proximity sensor on the rear wheel. This allows the gear selection to shift automatically based on rear wheel speed. The microcontroller is programmed with thresholds for gear changes based on pulses detected by the sensor over time. A flowchart represents the program logic. The system was designed and simulated using Proteus software and the Arduino IDE. It aims to improve driving ease and efficiency over traditional manual transmission motorcycles.
speed control of three phase induction motor using IOTswaroop009
The main aim is to control and monitor the speed of the three-phase induction motor by using the Arduino, node MCU controller and 3-phase inverter circuits.
speed control of three phase induction motor using IOTswaroop009
The main aim is to control and monitor the speed of the three-phase induction motor by using the Arduino, node MCU controller and 3-phase inverter circuits.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
SPEED SYNCHRONIZATION OF MASTER –SLAVE D.C. MOTORS USING MICROCONTROLLER, FOR...Editor IJMTER
In textile industry many processes require speed synchronization of more than one motors involved in the process. Rolling of cloth should be synchronized with the speed of weaving spindle to avoid damage and motor speed synchronization is vital in conveyor belt driven by multiple motors. Abrupt load variations may cause hunting or oscillatory behavior in d. c. machines. This behavior can be detrimental to the process. The digitally controlled d. c. machines can have much aggravated phenomenon owing to poor sampling period selection. Traditionally processes are synchronized through mechanical transmission system consisting of a line shaft gears, pullers etc. Among the available software mechanisms master-slave synchronization is a widely used technique. Multi-motor applications have become very attractive field in industrial applications replacing in traditional mechanical coupling. Many textile applications involved synchronized speed motors. For example wrapping of clothes should be synchronized with the speed of weaving spindle to avoid damage and Similarly in some cases the speed of long conveyor belt driven by multiple motors is need to be constant. In such types of applications master slave technique is used as a software mechanism to synchronize the speed of different motors to avoid damage.
Speed Synchronization of Multiple Bldcmotors In Textile &Paper Mills Using Mi...IJERA Editor
Multiple motor setup has vast application in industries. The application can be in textile mills, paper mills and robotics. In these all application the synchronization is must between the motors to perform certain task. Speed synchronization is very essential in these all operation to avoid damage to the product. The synchronization is done by using microcontroller chip which controls the master slave whose speed is followed by the other motors which all have to be synchronized.
Speed and direction control of dc motor using android mobile application grv ...chandan kumar
This project is all about the wireless operation of a DC Motor. In this project, we will control the speed of a DC Motor. Direction of the rotation will also be controlled. Wireless facility is provided with the help of Bluetooth connectivity. An android handset is required to control the operation. As the name suggests that “Speed and Direction Control of DC Motor using Android Mobile Application” is controlling the speed of a DC motor with any mobile phone containing some medium of connectivity such as Bluetooth
Camera Movement Control using PID Controller in LabVIEWijtsrd
The aim of this system is to show how position of the dc motor can be controlled by using PID algorithm in LabVIEW for camera movement. Arduino microcontroller board is used to control the DC motor. L298N dual H Bridge motor driver is used to drive the DC motor and to execute the pulse width modulation PWM signal. Proportional Integral Derivative PID is the most common control algorithm used in industrial applications and other control system. DC motor will be interfaced with LabVIEW using an Arduino Uno microcontroller. The position of the DC motor will be set by creating a Graphic User Interface GUI in LabVIEW. LabVIEW GUI sends serial command to the microcontroller for driving PWM pins of the DC motor . DC motor will move by the user in LabVIEW for position control. The output is sent back to the PID controller in Uno microcontroller. PID compares the actual position of the DC motor with the desired position. In this system, PID controller is used to reduce the error and rotate the motor to the set point value for the camera movement control. Than Myint Kyi | Kyaw Zin Latt "Camera Movement Control using PID Controller in LabVIEW" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26397.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26397/camera-movement-control-using-pid-controller-in-labview/than-myint-kyi
Speed and direction control of dc motor using android mobile application chan...chandan kumar
This project is all about the wireless operation of a DC Motor. In this project, we will control the speed of a DC Motor. Direction of the rotation will also be controlled. Wireless facility is provided with the help of Bluetooth connectivity. An android handset is required to control the operation. As the name suggests that “Speed and Direction Control of DC Motor using Android Mobile Application” is controlling the speed of a DC motor with any mobile phone containing some medium of connectivity such as Bluetooth. Various terms related to this project can be discussed as follows. Since we are concern with the wireless application that is why we are using here a mobile phone to control the whole process. Now the question is why should we use a mobile phone? Which is the most suitable mobile phone? So the answer is that mobile is used only for a Bluetooth connection. We need not to carry an extra device for transmitting the data. This transmitter is already inbuilt in a mobile phone. Now come with the question of most suitable mobile phone, so it can be observed that Android phones are the most widely used phones. Android phones are very easy from the operating point of view. I-phones and windows phones are not as popular as the Android phones. So the Android phone will be used here
working video- https://youtu.be/RPHu4fDcvqM
The stepper motor control system uses ULN2003 chip to drive. The working voltage is DC5V. It is widely used on ATM machine, inkjet printer
cutting plotter, fax machine,spraying equipment, medical instruments and equipments, PC peripheral, and USB Mass Storage ,precise instrument
industrial control system,office automation,robot areas,etc.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
SPEED SYNCHRONIZATION OF MASTER –SLAVE D.C. MOTORS USING MICROCONTROLLER, FOR...Editor IJMTER
In textile industry many processes require speed synchronization of more than one motors involved in the process. Rolling of cloth should be synchronized with the speed of weaving spindle to avoid damage and motor speed synchronization is vital in conveyor belt driven by multiple motors. Abrupt load variations may cause hunting or oscillatory behavior in d. c. machines. This behavior can be detrimental to the process. The digitally controlled d. c. machines can have much aggravated phenomenon owing to poor sampling period selection. Traditionally processes are synchronized through mechanical transmission system consisting of a line shaft gears, pullers etc. Among the available software mechanisms master-slave synchronization is a widely used technique. Multi-motor applications have become very attractive field in industrial applications replacing in traditional mechanical coupling. Many textile applications involved synchronized speed motors. For example wrapping of clothes should be synchronized with the speed of weaving spindle to avoid damage and Similarly in some cases the speed of long conveyor belt driven by multiple motors is need to be constant. In such types of applications master slave technique is used as a software mechanism to synchronize the speed of different motors to avoid damage.
Speed Synchronization of Multiple Bldcmotors In Textile &Paper Mills Using Mi...IJERA Editor
Multiple motor setup has vast application in industries. The application can be in textile mills, paper mills and robotics. In these all application the synchronization is must between the motors to perform certain task. Speed synchronization is very essential in these all operation to avoid damage to the product. The synchronization is done by using microcontroller chip which controls the master slave whose speed is followed by the other motors which all have to be synchronized.
Speed and direction control of dc motor using android mobile application grv ...chandan kumar
This project is all about the wireless operation of a DC Motor. In this project, we will control the speed of a DC Motor. Direction of the rotation will also be controlled. Wireless facility is provided with the help of Bluetooth connectivity. An android handset is required to control the operation. As the name suggests that “Speed and Direction Control of DC Motor using Android Mobile Application” is controlling the speed of a DC motor with any mobile phone containing some medium of connectivity such as Bluetooth
Camera Movement Control using PID Controller in LabVIEWijtsrd
The aim of this system is to show how position of the dc motor can be controlled by using PID algorithm in LabVIEW for camera movement. Arduino microcontroller board is used to control the DC motor. L298N dual H Bridge motor driver is used to drive the DC motor and to execute the pulse width modulation PWM signal. Proportional Integral Derivative PID is the most common control algorithm used in industrial applications and other control system. DC motor will be interfaced with LabVIEW using an Arduino Uno microcontroller. The position of the DC motor will be set by creating a Graphic User Interface GUI in LabVIEW. LabVIEW GUI sends serial command to the microcontroller for driving PWM pins of the DC motor . DC motor will move by the user in LabVIEW for position control. The output is sent back to the PID controller in Uno microcontroller. PID compares the actual position of the DC motor with the desired position. In this system, PID controller is used to reduce the error and rotate the motor to the set point value for the camera movement control. Than Myint Kyi | Kyaw Zin Latt "Camera Movement Control using PID Controller in LabVIEW" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26397.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26397/camera-movement-control-using-pid-controller-in-labview/than-myint-kyi
Speed and direction control of dc motor using android mobile application chan...chandan kumar
This project is all about the wireless operation of a DC Motor. In this project, we will control the speed of a DC Motor. Direction of the rotation will also be controlled. Wireless facility is provided with the help of Bluetooth connectivity. An android handset is required to control the operation. As the name suggests that “Speed and Direction Control of DC Motor using Android Mobile Application” is controlling the speed of a DC motor with any mobile phone containing some medium of connectivity such as Bluetooth. Various terms related to this project can be discussed as follows. Since we are concern with the wireless application that is why we are using here a mobile phone to control the whole process. Now the question is why should we use a mobile phone? Which is the most suitable mobile phone? So the answer is that mobile is used only for a Bluetooth connection. We need not to carry an extra device for transmitting the data. This transmitter is already inbuilt in a mobile phone. Now come with the question of most suitable mobile phone, so it can be observed that Android phones are the most widely used phones. Android phones are very easy from the operating point of view. I-phones and windows phones are not as popular as the Android phones. So the Android phone will be used here
working video- https://youtu.be/RPHu4fDcvqM
The stepper motor control system uses ULN2003 chip to drive. The working voltage is DC5V. It is widely used on ATM machine, inkjet printer
cutting plotter, fax machine,spraying equipment, medical instruments and equipments, PC peripheral, and USB Mass Storage ,precise instrument
industrial control system,office automation,robot areas,etc.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.