This document describes a proposed system for detecting transmission line breakages and alerting relevant parties. The system uses voltage sensors along transmission lines to continuously monitor voltages between sections. If a rapid voltage change is detected between two sections, a signal is sent to trip the power supply and alert the public via buzzers. Data is communicated between sections using wireless sensor networks. The system is simulated using a PIC microcontroller and results are displayed on an LCD screen and transmitted to peripherals. The goal of the system is to quickly detect broken power lines to prevent electrical accidents and power outages.
Transmission line is one the important compnent in protection of electric power system because the transmission line connects the power station with load centers.
The fault includes storms, lightning, snow, damage to insulation, short circuit fault [1].
Fault needs to be predicted earlier in order to be prevented before it occur
Telecoms Carriers and Service Providers use Managed Ethernet Demarcation Devices (EDDs) to provide full end-to-end visibility and control of their Layer-2 infrastructure.
Advanced EDDs incorporate test-traffic generation and protocols such as ITU-T Y.1731 to monitor key service-level characteristics such as Frame Loss, Latency and Jitter.
Now, it is possible to incorporate fibre integrity checking and fault-reporting to such devices. Specifically, Optical Time Domain Reflectometer (OTDR) functionality, integrated directly into EDD fibre interfaces, provides a cost-effective solution to Carriers for fibre fault determination and localisation, reducing costs and time-to-repair for customer services.
Transmission line is one the important compnent in protection of electric power system because the transmission line connects the power station with load centers.
The fault includes storms, lightning, snow, damage to insulation, short circuit fault [1].
Fault needs to be predicted earlier in order to be prevented before it occur
Telecoms Carriers and Service Providers use Managed Ethernet Demarcation Devices (EDDs) to provide full end-to-end visibility and control of their Layer-2 infrastructure.
Advanced EDDs incorporate test-traffic generation and protocols such as ITU-T Y.1731 to monitor key service-level characteristics such as Frame Loss, Latency and Jitter.
Now, it is possible to incorporate fibre integrity checking and fault-reporting to such devices. Specifically, Optical Time Domain Reflectometer (OTDR) functionality, integrated directly into EDD fibre interfaces, provides a cost-effective solution to Carriers for fibre fault determination and localisation, reducing costs and time-to-repair for customer services.
A REVIEW OF SELF HEALING SMART GRIDS USING THE MULTIAGENT SYSTEMijiert bestjournal
This paper is trying review different techniques us ed for self healing of the smart grid network. A smart grid has taken a very high importance in th e last ten years or so. Then the advancement in smart grid has taken a major importance. One of the most important aspects in the field of smart grid is a self healing of fault,and this att racted the researchers. As described in many research papers,one of the main requirements of th e electrical grid is to maintain zero gap between generation and distribution [2,3,4]. Howe ver deregulation and decentralized generation has given with the information and communication te chnology (ICT). This paper will summarize latest available techniques for self healing smart grids.
A Project Report Submitted in Partial Fulfillment of the Requirements for the Degree of BACHELOR OF ENGINEERING in
(COMMUNICATION)
BY
AKRM ABDULAH RASSAM (91048)
AMAL ABDULRAHMAN HAMOUD (10003)
MOHAMMED ABDULJABBAR QAID (10029)
MOHAMMED ABDUL-RAHMAN (91028)
NADA YASIN ABDULSALAM (10038)
SAMAR ABDULKAWE ALSHARAIE (10016)
SUPERVISOR
DR. REDHWAN QASEM SHADDAD
TAIZ, YEMEN
2015
Fault location and correction are important in case of any power systems. This process has to be prompt and accurate so that system reliability can be improved , outage time can be reduced and restoration of system from fault can be accelerated.
Fault location calculation using Magnetoresistance sensor is described here.
A REVIEW OF SELF HEALING SMART GRIDS USING THE MULTIAGENT SYSTEMijiert bestjournal
This paper is trying review different techniques us ed for self healing of the smart grid network. A smart grid has taken a very high importance in th e last ten years or so. Then the advancement in smart grid has taken a major importance. One of the most important aspects in the field of smart grid is a self healing of fault,and this att racted the researchers. As described in many research papers,one of the main requirements of th e electrical grid is to maintain zero gap between generation and distribution [2,3,4]. Howe ver deregulation and decentralized generation has given with the information and communication te chnology (ICT). This paper will summarize latest available techniques for self healing smart grids.
A Project Report Submitted in Partial Fulfillment of the Requirements for the Degree of BACHELOR OF ENGINEERING in
(COMMUNICATION)
BY
AKRM ABDULAH RASSAM (91048)
AMAL ABDULRAHMAN HAMOUD (10003)
MOHAMMED ABDULJABBAR QAID (10029)
MOHAMMED ABDUL-RAHMAN (91028)
NADA YASIN ABDULSALAM (10038)
SAMAR ABDULKAWE ALSHARAIE (10016)
SUPERVISOR
DR. REDHWAN QASEM SHADDAD
TAIZ, YEMEN
2015
Fault location and correction are important in case of any power systems. This process has to be prompt and accurate so that system reliability can be improved , outage time can be reduced and restoration of system from fault can be accelerated.
Fault location calculation using Magnetoresistance sensor is described here.
Process monitoring, controlling and load management system in an induction motoreSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Automatic Fault Detection System with IOT BasedYogeshIJTSRD
The fault location is an important part for any transmission line and distribution system. The location of fault is difficult task sometimes it takes lot of times needed for the exact location of the fault. The exact fault location can help the service man to overcome the fault free system in very less time. In this paper we are able to detect the fault range in easy way using the ESP module and the message is transferred on the mobile. This project is cost effective and reliable. Fast fault detection provide the protection of equipment before any significant damage. Er. Sanjeev Kumar | Mohd Mehraj Khan | Nadeem | Shailesh Kumar Yadav | Harsh Gupta "Automatic Fault Detection System with IOT Based" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd43806.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/43806/automatic-fault-detection-system-with-iot-based/er-sanjeev-kumar
Similar to IRJET- A Unique Methodology for Transmission Line Breakage Detection and Alerting System (20)
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.