Amit Pratap Singh is seeking a position that utilizes his 9+ years of experience in telecommunications operations and maintenance, including experience with OSS tools, PDH, SDH, CWDM, DWDM and network management tools. He currently works as an Assistant Manager for Problem Management at Tata Communications, where he is responsible for troubleshooting customer links, new link implementation, and ensuring network uptime of 99.95%. Singh has a Bachelor's Degree in Electronics and Communication Engineering and is ITIL certified in service management.
A Project Report Submitted in Partial Fulfillment of the Requirements for the Degree of BACHELOR OF ENGINEERING in
(COMMUNICATION)
BY
AKRM ABDULAH RASSAM (91048)
AMAL ABDULRAHMAN HAMOUD (10003)
MOHAMMED ABDULJABBAR QAID (10029)
MOHAMMED ABDUL-RAHMAN (91028)
NADA YASIN ABDULSALAM (10038)
SAMAR ABDULKAWE ALSHARAIE (10016)
SUPERVISOR
DR. REDHWAN QASEM SHADDAD
TAIZ, YEMEN
2015
A Project Report Submitted in Partial Fulfillment of the Requirements for the Degree of BACHELOR OF ENGINEERING in
(COMMUNICATION)
BY
AKRM ABDULAH RASSAM (91048)
AMAL ABDULRAHMAN HAMOUD (10003)
MOHAMMED ABDULJABBAR QAID (10029)
MOHAMMED ABDUL-RAHMAN (91028)
NADA YASIN ABDULSALAM (10038)
SAMAR ABDULKAWE ALSHARAIE (10016)
SUPERVISOR
DR. REDHWAN QASEM SHADDAD
TAIZ, YEMEN
2015
Telecoms Carriers and Service Providers use Managed Ethernet Demarcation Devices (EDDs) to provide full end-to-end visibility and control of their Layer-2 infrastructure.
Advanced EDDs incorporate test-traffic generation and protocols such as ITU-T Y.1731 to monitor key service-level characteristics such as Frame Loss, Latency and Jitter.
Now, it is possible to incorporate fibre integrity checking and fault-reporting to such devices. Specifically, Optical Time Domain Reflectometer (OTDR) functionality, integrated directly into EDD fibre interfaces, provides a cost-effective solution to Carriers for fibre fault determination and localisation, reducing costs and time-to-repair for customer services.
A NURBS-optimized dRRM solution in a mono-channel condition for IEEE 802.11 e...IJECEIAES
Dynamic Radio Resource Management, RRM, is an essential design block in the functional architecture of any Wifi controller in IEEE 802.11 indoor dense enterprise Wlans. In a mono-channel condition, it helps tackle co-channel interference problem and enrich end-to-end Wifi clients experience. In this work, we present our dRRM solution: WLCx, and demonstrate its performance over related-work and vendor approaches. Our solution is built on a novel and realistic per-Beam coverage representation approach. Unlike the other RRM solutions, WLCx is dynamic: even the calculation system parameters are processed. This processing comes at price in terms of processing time. To overcome this limitation, we constructed and implemented a NURBS surface-based optimization to our RRM solution. Our NURBS optimized WLCx, N-WLCx, solution achieves almost 92:58% time reduction in comparison with basic WLCx. Furthermore, our optimization could easily be extended to enhance others, vendors and research, RRM solutions.
ASSESSING PERCEPTUAL VIDEO QUALITY IN WIMAX NETWORKS ijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking
applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface
standard. The Video Quality Model developed by Information Administration’s Video Quality Expert
Group is used to benchmark perceptual video quality
ASSESSING PERCEPTUAL VIDEO QUALITY IN WIMAX NETWORKS ijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface standard. The Video Quality Model developed by Information Administration’s Video Quality Expert Group is used to benchmark perceptual video quality.
Assessing perceptual video quality in wimax networksijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface
standard. The Video Quality Model developed by Information Administration’s Video Quality Expert Group is used to benchmark perceptual video quality.
Improving quality of service using ofdm technique for 4 th generation networkeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
Telecoms Carriers and Service Providers use Managed Ethernet Demarcation Devices (EDDs) to provide full end-to-end visibility and control of their Layer-2 infrastructure.
Advanced EDDs incorporate test-traffic generation and protocols such as ITU-T Y.1731 to monitor key service-level characteristics such as Frame Loss, Latency and Jitter.
Now, it is possible to incorporate fibre integrity checking and fault-reporting to such devices. Specifically, Optical Time Domain Reflectometer (OTDR) functionality, integrated directly into EDD fibre interfaces, provides a cost-effective solution to Carriers for fibre fault determination and localisation, reducing costs and time-to-repair for customer services.
A NURBS-optimized dRRM solution in a mono-channel condition for IEEE 802.11 e...IJECEIAES
Dynamic Radio Resource Management, RRM, is an essential design block in the functional architecture of any Wifi controller in IEEE 802.11 indoor dense enterprise Wlans. In a mono-channel condition, it helps tackle co-channel interference problem and enrich end-to-end Wifi clients experience. In this work, we present our dRRM solution: WLCx, and demonstrate its performance over related-work and vendor approaches. Our solution is built on a novel and realistic per-Beam coverage representation approach. Unlike the other RRM solutions, WLCx is dynamic: even the calculation system parameters are processed. This processing comes at price in terms of processing time. To overcome this limitation, we constructed and implemented a NURBS surface-based optimization to our RRM solution. Our NURBS optimized WLCx, N-WLCx, solution achieves almost 92:58% time reduction in comparison with basic WLCx. Furthermore, our optimization could easily be extended to enhance others, vendors and research, RRM solutions.
ASSESSING PERCEPTUAL VIDEO QUALITY IN WIMAX NETWORKS ijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking
applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface
standard. The Video Quality Model developed by Information Administration’s Video Quality Expert
Group is used to benchmark perceptual video quality
ASSESSING PERCEPTUAL VIDEO QUALITY IN WIMAX NETWORKS ijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface standard. The Video Quality Model developed by Information Administration’s Video Quality Expert Group is used to benchmark perceptual video quality.
Assessing perceptual video quality in wimax networksijujournal
This paper presents an approach for assessing the perceptual quality of wireless video networking applications transmitted via WiMAX, the Worldwide Interoperability for Microwave Access air interface
standard. The Video Quality Model developed by Information Administration’s Video Quality Expert Group is used to benchmark perceptual video quality.
Improving quality of service using ofdm technique for 4 th generation networkeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
Working as a “Solpar Manager “on Samsung/Reliance 4G Project.
Responsibility:
Solpar Team management and checking on daily basis.
Tool and device management at circle.
Provides DPR to management team support and assistance in scheduling, documentation, communication, reporting and transaction processing.
Supports the planning and implementation work from beginning to end.
Monitors and reports project progress, problems and solutions as necessary in a timely manner to stakeholder(s)
Facilitates, tracks, and documents project plan, timelines, tasks, deliverables and resource requirements
Handles ordering and delivery coordination for hardware, software and services globally.
Proactively conforms to shifting priorities, resources, changes, demands and timelines through analytical and problem-solving capabilities to achieve project outputs.
1. CURRICULUM VITAE
Telephone: (Mobile) +918087860311, +917506056205
AMIT PRATAP SINGH Email: amitpratapsingh81@gmail.com
OBJECTIVE:
To be part of a meritocratic organization at a position where strong analytical, problem solving skills will be
demonstrated and will provide me an excellent learning environment.
SUMMARY OF CAREER SKILLS AND EXPERIENCE:
An extensive 9+ years of experience in Operation & Maintenance in Telecom Domain: OSS tools,
PDH, SDH, CWDM, DWDM and Network Management tools.
ITIL Service Support areas of Incident, Problem, Change, Release, Configuration Management and
Service Desk.
Presently working as Assistant Manager – Service Assurance Department (Problem
Management) for TATA COMMUNICATION LTD.
Bachelor of Engineering in Electronics & Communication Engineering from M.M.M. Engineering
College, D.D.U. University, U.P. in 2003.
Experience in troubleshooting of International / National Private Leased Lines (IPLCs , NPLC’s, ILLS )
for the various speeds from 64k to 2Mb , E3 , DS3 , STM-1, STM-4, STM-16 & STM-64.
Handling OSS Projects such as CRAMER, IMS, FMS (BFM+AFM), PMS, DISCOVERY, REMEDY and
CNMS Portal. For International Networks (REGI, REGP, NIMS & REPC).
Lent an in-depth understanding in the areas of Project handling, Processes of different sections in
Telecom, Operation, Maintenance & Manpower planning and supervision. Able to work on self-initiative
and as part of team, and achieve set goals.
EMPLOYMENT HISTORY:
Since Jan’07 with TATA COMMUNICATIONS LTD as Assistant Manager for Problem
Management Department.
JOB RESPONSIBILITIES:
Working as Assistant Manager for Problem Management Team in SPOT (Service Performance
Optimization Team) at HQ (Corporate Office) for the Enterprise, IP and Carrier Services. The
2. main function of team is to re deliver the services for individual link basis & redesign of network to fulfill the
requirement of services.
Continuous follow ups & coordination with Engineering, NOC, Field Operations & Service/Program
Management teams for escalated cases closure.
Alarm monitoring and Troubleshooting of Customer Links & handling Customer Escalation.
New link takeover, Lambda Up gradation to meet growing traffic requirement, Acceptance testing of
newly commissioned links & equipment’s.
Migration of LOS (Line of Sight) issues cases on alternate media by checking feasibility.
Testing of SNCP, MSP (1+1, 1:1), MS-SPRing protection schemes for newly commissioned links.
Provisioning of Work Order using EMS/NMS and Implementation of Work orders and interaction
with Network Engineering, Bandwidth Planning & Traffic Management Team for timely completion
of task.
Coordination with vendors for preventive maintenance activity scheduling, and regular health check
up of network, in terms of OSNR, Sync, Power Level, and Equipment Alarms.
To provide Technical support to field Engineers for rectification Optical Errors related issues.
To maintain the network up time by 99.95%.
Docket (Complaint’s Ticket) Analysis of Performance of Enterprise Services (Including Domestic &
International).
Identification of RCA (root cause analysis) of Major & Similar Type of failures across Customer
Network, Last Mile & MAN Network (Domestic & International) with respective stakeholders.
Tracking the PCA (permanent corrective action) preparation with respective owners till its execution
(or Service Redelivery in case of change of BSO).
Involved in Presentation & discussion of decision required issues in weekly audiocon & Bi Weekly
VC with VP (O), 11 Circles & 3 Vertical Heads.
Planned event for ring shortening & traffic migration for making the improving the uptime of
customer links.
Preventive Maintenance activities on ECI, Tellabs, Nortel, ALCATEL Equipments & infra
equipment’s available at sites with vendor.
Configuring SDH equipments at both ends (Tejas), Handling of various CWDM, DWDM
equipment’s.
Provisioning experience of E1/E3/DS3/STMx circuits, EoS, transmission testing and measurement
equipments. O&M of SDH, CWDM & DWDM Equipment’s.
Process implementations & Adherences in SA departments.
Raising CR for various tools Remedy, Viznet, Discovery, Performance management tools.
Projects Handled:
Repeat Fault Rate reduction Project for BSO (Basic Service Operator) & TCL Network.
Offnet to Onnet Conversion of Last Mile Media.
SPOF (Single Point of Failure) removal for Customer’s circuits by auditing routes.
3. To provide bandwidth services to Delhi and NCR customer on Optical Fibre Cable .This is one of TCL’s
ambitious projects for entering in Broadband market. In its first phase we are targeting the four metros
and 35 selected states hubs (MAN (Metro Access Network) & NLD (National Long Distance)).
Designing of Fibre network for providing Broadband and Leased Line services to customers in Delhi and
NCR, which includes Fibre (route) planning and management.
Alarm Management, Synchronization of Network, Management of Bandwidth.
Collecting data of NCR Region of Delhi for Inventory management system (CRAMER).
Successful implementation of PMS, NMS upgradation.
LINK Engineer with NuTeC (I) PVT. LTD. Gurgaon (Haryana) from Dec’03 to Jan’07
Job Profile:
Worked on Reliance Network’s, especially on fibre routes in between Lucknow & Kanpur via Unnao
(48F, 24F Fibres) (STM1, STM4, SDH, DWDM).
Supervision of Trenching, laying of OFC Cable, splicing, testing of OFC (OTDR, Power Meter & other),
termination, Installation.
Maintenance of STM-1/4, dealing with Operations & maintenance team.
Set up the fiber connectivity between STM-1 & STM-4 at different stations including provisioning &
installation.
Provisioning experience of E1/E3/DS3/STM, Tributary Management circuits in SDH equipments,
transmission testing and measurement equipments.
SKILLS SETS:
Transmission domain SDH, PDH, EOS, DWDM & CWDM.
NMS Ethernet Network Analyzer, ADVA FSP Network Manager Release 5.4, CISCO
Transport Manager (CTM) Release 5.0.2, CISCO Transport Controller (CTC)
Release 5.0.2 , HUAWEI OptiX iManager T2000 Version T2000V200R004C01
,TEJAS TejNMS Network Manager Version 02.00.00, ECI Release 7.
Transmission equipments CISCO ONS 15454, ADVA FSP 2000 & 3000, TEJAS (CPE, MC1, MC4L, MC16,
TJ1500, TJ1210, TJ1260, TJ1310 and ME) and ECI (XDM 100, 1000 and 2000).
Transmission Tools POWER METER for optical power measurement, LASER SOURCE makers
Acterna,
BER METER for 2Mbps E1 stability testing makers ACTRENA (PF-30), SDH
Analyzer for Jitter measurement Makers Acterna (ANT-20), OTDR for OFC
tracing Makers Acterna, ETHERNET Tester FST-2802 makers Acterna, PFC
meter for testing E1 connectivity.
OSS/BSS Tools OSS tools used Metasolv (MSS 6), PMS, Discovery, Viznet, Cramer, SFDC, BPM
& Remedy, For International Networks (REGI, REGP, NIMS & REPC).
4. EDUCATION:
B.E. in Electronics & Communication Engineering from M.M.M. Engineering College, D.D.U. University, U.P.
in 2003.
ITIL V3 Certification
IT Services Management (2011)
TRAININGS:
Trobleshooting of various Alarms in Optical Network, Pune.
Training for OSS/BSS tools- Cramer, Remedy, M6, PMS Tools in Mumbai.
Ethernet over SDH training over TEJAS SDH MUX from TEJAS, Mumbai.
Commissioning and troubleshooting of ADVA CWDM & DWDM equipment by VSNL, Pune.
High Impact Presentation skill in Pune.
MAJOR ACHIEVEMENTS:
Extra Mile awards for extraordinary contributions in Enhancing existing Network performance.
Pit Stop Challenge and Gladiator award for over achieved targets beyond specified TAT.
Hi5 for successful implementation of CR on Remedy, Viznet, PMS Tools.
PERSONAL DETAILS:
FATHERS NAME: Mr. H. N. Singh
DOB: 19th July 1981
PERMANENT ADDRESS: Plot no. 54, Sriram nagar colony,
Bajardihan, Varanasi, U.P. -201010.
PASSPORT STATUS: Available.
DECLARATION:
I, hereby declare that all the information given above is true to the best of my knowledge.
PLACE: __________
DATE: ___________
Amit Pratap Singh