SUBMITTED BY
S.NANDHINI
MSC(CS&IT)
 IEEE introduction
 IEEE 802.5 definition
 IEEE 802.5 LAN
 IEEE 802.5 Ethernet LAN
 IEEE->INSTITUTE OF ELECTRICAL AND
ELECTRONICS ENGINEERS
 The IEEE fosters develop of standared become
national and international standards
 IEEE computer society
 The IEEE standared for minimum of number
of stations is 24
 802.5 is token passing ring access method
physical layer specifications
 The 802.5 recommendations include token ring
 Including a monitor which adds the extra bits
of delay
o The token ring 4 and 16 mbps twisted pair line
coding
o Token ring is the IEEE 802.5 standared for a
token passing ring in communication networks
o The information flows in direction along the
ring from source medium access control to
destination back to source
o Collection of ring point to point
I. Network move a small frame called a token
around the network
II. Alters 1 bit of the token appends information
that it wants to transmit sends this information
to the next station on the ring
 The LAN->local area network is particular a
single building,office,school,home,campus.
 Sharing of resource and services like files
,printers,e-mail or internet access
 Multiple LANs within a traditional home
networks
LOCAL AREA NETWORK
 Ethernet and wi-fi are usually used in most
business and homes due to the low cost and
speed require
 Ethernet physical and datalink layer
technology for LAN
 Ethernet is a link layer protocol in the Tcp/Ip
stack
 The Internet and ATM were designed for wide
area networking. However, many companies,
universities,
 And other organizations have large numbers of
computers that must be connected. This need
gave rise.
 The local area network. In this section we will
say a little bit about the most popular LAN,
Ethernet
IEEE STANDARED 802.5 LAN

IEEE STANDARED 802.5 LAN

  • 1.
  • 2.
     IEEE introduction IEEE 802.5 definition  IEEE 802.5 LAN  IEEE 802.5 Ethernet LAN
  • 3.
     IEEE->INSTITUTE OFELECTRICAL AND ELECTRONICS ENGINEERS  The IEEE fosters develop of standared become national and international standards  IEEE computer society
  • 4.
     The IEEEstandared for minimum of number of stations is 24  802.5 is token passing ring access method physical layer specifications  The 802.5 recommendations include token ring  Including a monitor which adds the extra bits of delay
  • 5.
    o The tokenring 4 and 16 mbps twisted pair line coding o Token ring is the IEEE 802.5 standared for a token passing ring in communication networks o The information flows in direction along the ring from source medium access control to destination back to source o Collection of ring point to point
  • 7.
    I. Network movea small frame called a token around the network II. Alters 1 bit of the token appends information that it wants to transmit sends this information to the next station on the ring
  • 9.
     The LAN->localarea network is particular a single building,office,school,home,campus.  Sharing of resource and services like files ,printers,e-mail or internet access  Multiple LANs within a traditional home networks
  • 10.
  • 11.
     Ethernet andwi-fi are usually used in most business and homes due to the low cost and speed require  Ethernet physical and datalink layer technology for LAN  Ethernet is a link layer protocol in the Tcp/Ip stack
  • 13.
     The Internetand ATM were designed for wide area networking. However, many companies, universities,  And other organizations have large numbers of computers that must be connected. This need gave rise.  The local area network. In this section we will say a little bit about the most popular LAN, Ethernet