The document describes a health monitoring system with wireless alarm that detects a patient's heart rate and temperature. It consists of a sensor unit worn on the wrist that monitors vital signs and transmits data wirelessly to an alarm and display unit. This allows caregivers to be alerted quickly if a patient's condition changes, such as if their heart rate is too high or low. The system uses a microcontroller to process sensor readings from a pulse oximetry sensor and transmit data via RF to the receiving unit, which contains another microcontroller connected to an RF receiver and buzzer alarm. If an abnormal heart rate is detected, the system triggers an alarm to notify caregivers.
Microcontroller Based Heart Beat and Temperature Monitoring System using Fing...xpressafridi
The basic idea behind this project is that anyone can stay connected with the doctor 24 hrs. It continuously provides following information to doctors.
Heart pulse rate
Temperature of human body
With rapid development of economies, growth of aging population and the prevalence of chronic diseases across the world, there is an urgent need to find new ways to improve patient outcomes, increase access to care, and reduce the cost of medical care. A health care monitoring system is necessary to constantly monitor patient’s physiological parameters. The tele-medical system focuses on the measurement and evaluation of vital parameters e.g. temperature, electrocardiogram (ECG), heart rate variability, fall detection etc. This will enable doctors and care givers to observe patients without having to be physically present at their bedside, be it in the hospital or in their home.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Microcontroller Based Heart Beat and Temperature Monitoring System using Fing...xpressafridi
The basic idea behind this project is that anyone can stay connected with the doctor 24 hrs. It continuously provides following information to doctors.
Heart pulse rate
Temperature of human body
With rapid development of economies, growth of aging population and the prevalence of chronic diseases across the world, there is an urgent need to find new ways to improve patient outcomes, increase access to care, and reduce the cost of medical care. A health care monitoring system is necessary to constantly monitor patient’s physiological parameters. The tele-medical system focuses on the measurement and evaluation of vital parameters e.g. temperature, electrocardiogram (ECG), heart rate variability, fall detection etc. This will enable doctors and care givers to observe patients without having to be physically present at their bedside, be it in the hospital or in their home.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Heart beat monitor using AT89S52 microcontrollerSushil Mishra
We , in this project are measuring the heart beat using the pulse oximetry logic.
The timer we have set for counting the heart beat is 30s.
There is a set point we can decide, after 30 s the heartbeat would be shown on the LCD along with a buzzer sound (if it exceeds the set point).
Health monitoring is the major problem in today’s world. Due to lack of proper health monitoring, patient suffer from serious health issues. There are lots of IoT devices now days to monitor the health of patient over internet. Health experts are also taking advantage of these smart devices to keep an eye on their patients. With tons of new healthcare technology start-ups, IoT is rapidly revolutionizing the healthcare industry.
Here in this project, we will make an IoT based Health Monitoring System which records the patient heart beat rate and body temperature and also send an email/SMS alert whenever those readings goes beyond critical values. Pulse rate and body temperature readings are recorded over ThingSpeak and Google sheets so that patient health can be monitored from anywhere in the world over internet. A panic will also be attached so that patient can press it on emergency to send email/sms to their relative
Design and Implementation of Real Time Remote Supervisory SystemIJERA Editor
In today’s fast growing communication environment and rapid exchange of data in networking field has triggered us to develop a home based remote supervisory monitoring system. In the present paper the physiological parameters of the patient such as body temperature, ECG, Pulse rate and Oxygen Saturation is displayed in MATLAB graphical user interface which is processed using ARM7 LPC2138. In case any emergency persist and parameters goes abnormal over the optimum level then a buzzer will ring to alert the caretaker. And the vital parameters will be displayed on the patient side computer and an automatic SMS will be sent to the doctor using GSM interface.
A Wireless Methodology of Heart Attack Detectionijsrd.com
The wrist watch with Heart Attack Detection is equipment that is used daily to indicate heart condition, to detect heart attack and to call for emergency help. It was designed specially to help patients with heart disease.This includes three common sub units. They are Circuit, Analysis Algorithm, and Bluetooth Communication. The first one is to wear on the wrist of the patient to captures the abnormal heart beat waves from the victim and the alternate methods are installed under the stick. This project is based on the previous project “Wireless Heart Attack Detector with GPS†of Fall 2004 [1]. we consider a big improvement in reducing the complexity of the project greatly, in saving power consumption of the project to run much fewer codes and in making the project to run at a faster time. No wire is attached to the wrists. In our project, the ECG waveform is transmitted wirelessly from the wrists to the watch. This gives the user great flexibility while the program is switched on and running. User can drive safely, can use restroom easily and can function normally like without the project. Previous project had the wire connection. All the hardware on the walking watch would have been strapped to the wrists. This will not make the project functional and marketable. Our project is completely portable. Heart condition is displayed in our project. The previous project did not inform the user about his heart condition. We display the heart condition through two LEDs as low-risk (alert level between 4 and 6) and high risk (alert level between 7 and 9). The user can know their heart condition and take proper action to avoid the fatal moment. Proper action could be slowing down and taking a rest.
Arduino based heartbeat monitoring system.Arkadeep Dey
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Report on Automatic Heart Rate monitoring using Arduino UnoAshfaqul Haque John
Automatic heart rate monitoring using Arduino. This is a report based on project. It includes the circuit diagram and the PCB layout diagram of the circuit
Its kind of technology to society.
The the project is of a Heart Monitoring Device which keeps a track of your heart beats.
If the person is getting Heart Attack, the device sends a message to pre-coded number(eg. Hospital, Doctor, Relative), so that the person can be treated.
The epidemic growth of wireless technology and mobile services in this epoch is creating a great impact on our life style. Some early efforts have been taken to utilize these technologies in medical industry. In this field, ECG sensor based advanced wireless patient monitoring system concept is a new innovative idea. This system aims to provide health care to the patient. We have sensed the patient’s ECG through 3 lead electrode system via AD8232 which amplifies minor and small bio-signals to the arduino which processes them, along with saline level. Saline level is detected through IR sensors. The output of the electrical pulse is shown with the serial monitor. The saline level is indicated by LCD. The major output ECG analog signal is displayed on serial plotter. The outputs are displayed through mobile application.
Patient Health Monitoring System Using Arduino & ESP8266Rishav Pandey
Sometimes it happens when patients struggles to find hospital beds but due to high number of covid patients they are forced to stay at home and aren't monitored by any doctor. This Health Monitoring System designed with the help of Arduino UNO board and ESP8266 wifi microchip helps the doctor to monitor the patient remotely (connected via an IoT based platform ThingSpeak). ESP8266 wi-fi microchip is used to provide internet connectivity to our project (or we can connect our project to any wifi using same). The system consists of a pulse sensor and and an LM35 temperature sensor which measures the patient's heart beats per minute and body temperature respectively. The Arduino reads the sensor data, converts them into string, passes them to the IoT platform (ThingSpeak) and also displays the BPM and body temperature on LCD display.
In this way a doctor can remotely monitor the patients and take appropriate actions when required.
The Cottages d/b/a as TruCare has a number of new projects opening up in Shell Knob, MO, Astoria, IL and other locations in the middle of America. Our 15 years of successful operations and treating people right is well known through the industry. The Cottages is excited to be opening up new home-like facilities that specialize in individualized care in Missouri and Illinois.
Heart beat monitor using AT89S52 microcontrollerSushil Mishra
We , in this project are measuring the heart beat using the pulse oximetry logic.
The timer we have set for counting the heart beat is 30s.
There is a set point we can decide, after 30 s the heartbeat would be shown on the LCD along with a buzzer sound (if it exceeds the set point).
Health monitoring is the major problem in today’s world. Due to lack of proper health monitoring, patient suffer from serious health issues. There are lots of IoT devices now days to monitor the health of patient over internet. Health experts are also taking advantage of these smart devices to keep an eye on their patients. With tons of new healthcare technology start-ups, IoT is rapidly revolutionizing the healthcare industry.
Here in this project, we will make an IoT based Health Monitoring System which records the patient heart beat rate and body temperature and also send an email/SMS alert whenever those readings goes beyond critical values. Pulse rate and body temperature readings are recorded over ThingSpeak and Google sheets so that patient health can be monitored from anywhere in the world over internet. A panic will also be attached so that patient can press it on emergency to send email/sms to their relative
Design and Implementation of Real Time Remote Supervisory SystemIJERA Editor
In today’s fast growing communication environment and rapid exchange of data in networking field has triggered us to develop a home based remote supervisory monitoring system. In the present paper the physiological parameters of the patient such as body temperature, ECG, Pulse rate and Oxygen Saturation is displayed in MATLAB graphical user interface which is processed using ARM7 LPC2138. In case any emergency persist and parameters goes abnormal over the optimum level then a buzzer will ring to alert the caretaker. And the vital parameters will be displayed on the patient side computer and an automatic SMS will be sent to the doctor using GSM interface.
A Wireless Methodology of Heart Attack Detectionijsrd.com
The wrist watch with Heart Attack Detection is equipment that is used daily to indicate heart condition, to detect heart attack and to call for emergency help. It was designed specially to help patients with heart disease.This includes three common sub units. They are Circuit, Analysis Algorithm, and Bluetooth Communication. The first one is to wear on the wrist of the patient to captures the abnormal heart beat waves from the victim and the alternate methods are installed under the stick. This project is based on the previous project “Wireless Heart Attack Detector with GPS†of Fall 2004 [1]. we consider a big improvement in reducing the complexity of the project greatly, in saving power consumption of the project to run much fewer codes and in making the project to run at a faster time. No wire is attached to the wrists. In our project, the ECG waveform is transmitted wirelessly from the wrists to the watch. This gives the user great flexibility while the program is switched on and running. User can drive safely, can use restroom easily and can function normally like without the project. Previous project had the wire connection. All the hardware on the walking watch would have been strapped to the wrists. This will not make the project functional and marketable. Our project is completely portable. Heart condition is displayed in our project. The previous project did not inform the user about his heart condition. We display the heart condition through two LEDs as low-risk (alert level between 4 and 6) and high risk (alert level between 7 and 9). The user can know their heart condition and take proper action to avoid the fatal moment. Proper action could be slowing down and taking a rest.
Arduino based heartbeat monitoring system.Arkadeep Dey
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Report on Automatic Heart Rate monitoring using Arduino UnoAshfaqul Haque John
Automatic heart rate monitoring using Arduino. This is a report based on project. It includes the circuit diagram and the PCB layout diagram of the circuit
Its kind of technology to society.
The the project is of a Heart Monitoring Device which keeps a track of your heart beats.
If the person is getting Heart Attack, the device sends a message to pre-coded number(eg. Hospital, Doctor, Relative), so that the person can be treated.
The epidemic growth of wireless technology and mobile services in this epoch is creating a great impact on our life style. Some early efforts have been taken to utilize these technologies in medical industry. In this field, ECG sensor based advanced wireless patient monitoring system concept is a new innovative idea. This system aims to provide health care to the patient. We have sensed the patient’s ECG through 3 lead electrode system via AD8232 which amplifies minor and small bio-signals to the arduino which processes them, along with saline level. Saline level is detected through IR sensors. The output of the electrical pulse is shown with the serial monitor. The saline level is indicated by LCD. The major output ECG analog signal is displayed on serial plotter. The outputs are displayed through mobile application.
Patient Health Monitoring System Using Arduino & ESP8266Rishav Pandey
Sometimes it happens when patients struggles to find hospital beds but due to high number of covid patients they are forced to stay at home and aren't monitored by any doctor. This Health Monitoring System designed with the help of Arduino UNO board and ESP8266 wifi microchip helps the doctor to monitor the patient remotely (connected via an IoT based platform ThingSpeak). ESP8266 wi-fi microchip is used to provide internet connectivity to our project (or we can connect our project to any wifi using same). The system consists of a pulse sensor and and an LM35 temperature sensor which measures the patient's heart beats per minute and body temperature respectively. The Arduino reads the sensor data, converts them into string, passes them to the IoT platform (ThingSpeak) and also displays the BPM and body temperature on LCD display.
In this way a doctor can remotely monitor the patients and take appropriate actions when required.
The Cottages d/b/a as TruCare has a number of new projects opening up in Shell Knob, MO, Astoria, IL and other locations in the middle of America. Our 15 years of successful operations and treating people right is well known through the industry. The Cottages is excited to be opening up new home-like facilities that specialize in individualized care in Missouri and Illinois.
The Cottages of Sun Valley are two new senior care facilities to be constructed and operated by The Cottages in Hailey, Idaho. An owner/operator management company with 15+ years experience, seeks $4.2MM for construction and $200K for operating capital during lease-up for a total of $4.4MM for the project.
A Low Power Wearable Physiological Parameter Monitoring Systemijsrd.com
The design and development of a low power wearable physiological parameter monitoring system have been developing and reporting in this paper. The system can be used to monitor physiological parameters, such as ECG signals, temperature and heartbeat. The system consists of an electronic device which is worn on the wrist and finger, by an at-risk person. Using several sensors to measure different vital signs, the person is wirelessly monitored within his own home. An epic sensor has been used to detect ECG signals. The device is battery powered for use outdoors. The device can be easily adapted to monitor athletes and infants. The low cost of the device will help to lower the cost of home monitoring of patients recovering from illness. A prototype of the device has been fabricated and extensively tested with very good results.
Force sensitive resistance based heart beatijistjournal
Heart related problems are the major health issues for the human. Almost 1 in every 4 death is mainly due
to the heart problems. Most of the people death due to heart problems is due to poor monitoring.To address
this issue this project has been designed. The main aim of this project is to measure the heart rate of an
elderly people and to alert the care taker when the heart rate is abnormal. The innovation done in this
project is measuring the force of the heartbeat at the wrist and thereby measuring the heart rate. The
component used to measure this heart rate is FSR(Force Sensitive Resistor).This device can be
implemented by means of wrist watch or wrist band. It also monitors the heart rate of the people for 24
hours.
Force Sensitive Resistance Based Heart Beat Monitoring For Health Care Systemijistjournal
Heart related problems are the major health issues for the human. Almost 1 in every 4 death is mainly due to the heart problems. Most of the people death due to heart problems is due to poor monitoring.To address this issue this project has been designed. The main aim of this project is to measure the heart rate of an elderly people and to alert the care taker when the heart rate is abnormal. The innovation done in this project is measuring the force of the heartbeat at the wrist and thereby measuring the heart rate. The component used to measure this heart rate is FSR(Force Sensitive Resistor).This device can be implemented by means of wrist watch or wrist band. It also monitors the heart rate of the people for 24 hours.
Real Time Physiological Status Monitorinig through Telemetry System for on Sp...ijtsrd
In todays era, Internet of Things is playing an important role in health care management systems, which is not only for monitoring but also to communicate, stores and display. The prime aim of this study is to design and implement effective real time healthcare monitoring dashboard for on spot accident patients who is injured and went to unconscious state. The proposed system monitor the ECG, EEG, EMG waveforms, Temperature, heart beats etc, and transmit those vital parameters wirelessly through wifi technology. The transmitted patients data is displayed in the PC based application called the central nurse station where PC with the receive wifi acts as hub. This data gets updated into database continuously. From the database of the android application fetches all the updated data, stores and displays it. This enables the doctor to receive the current status of an accident patient in real time. The parameters of a particular patient go beyond a threshold value an automated notification will pop up in doctor android mobile application. This android application can also generate call option if the doctor will not notifynotification messages. Additionally system is also able to generate alarm to notify nurse around for emergency treatment and by using GSM module the patient datas can also be send to the authorized person i.e friends, relatives etc. Ultimate goal of this project is to implement a low cost, high efficient and effective wireless real time system for health monitoring through telemetry system. S. Rabia Jebin | N. Mohamedbeemubeen ""Real Time Physiological Status Monitorinig through Telemetry System for on-Spot-Accident Patients using IoT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23470.pdf
Paper URL: https://www.ijtsrd.com/engineering/bio-mechanicaland-biomedical-engineering/23470/real-time-physiological-status-monitorinig-through-telemetry-system-for-on-spot-accident-patients-using-iot/s-rabia-jebin
The sensor housed on the patient’s finger, detects the pumping of the heart and produces a voltage output. This is then transferred to the Microcontroller.
In the Microcontroller the output is plotted with respect to real time to the heart beat rate.
This information can be stored on the computer and can be used to analyze a status of the patient.
Heart Attack Detection VIA HEART Beat Monitor System Utkarsh Lokpriye
A heart rate monitor is a personal monitoring device which allows one to measure his or her heart rate in real time or record the heart rate for later study. It is largely used by performers of various types of physical exercise
Recently, in many cases, the reason for a patient staying in the hospital is not that he or she actually needs active medical care. Often, the principal reason for a lengthy stay in the hospital is simply continual observation. Therefore, efforts have been made to avoid acute admissions and long lengths of stay in the hospital. In recent years, emergency admissions and long lengths of stay have become extremely costly. So the focus of health policy has shifted away from the provision of reactive, acute care toward preventive care outside the hospital. As models of care are redesigned, health economies are seeking to provide more care outside large acute centers. The drivers for this shift are two-fold; first, there is a quality-of-care issue and second, there is a resource allocation issue. Being cared for in a patient’s own home is a key aim of current U.K. government health policy and that is driven by an imperative to provide better quality care to people without the need to disrupt their lives. Investment in technologies that enable remote monitoring would lead to long-term gains in terms of hospital finances and patient care.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.