Hossein Emadi is a senior process engineer with over eight years of experience in process design for oil, gas, and petrochemical plants. He has extensive experience performing process simulations, equipment design, and preparing process documentation for projects in Iran, Italy and other locations. Emadi is proficient in process simulation tools such as HYSYS and ASPEN Plus and has strong English communication skills. He holds a Bachelor's degree in Chemical Engineering from the University of Tehran.

1. HOSSEIN EMADI Unit5, No.96, Mobini Alley, Ebadi St., Farjam St.,
Tehran, Iran
e-mail: Hosseinemadi@yahoo.com
LinkedIn Profile: Hossein Emadi (Senior Process Engineer)
Cell Phone: 00(98) 912-2483251
Technical Skills: • Over Seven years of experience in Process Design Engineering in several multi-cultural
engineering environments (working with Axens, LINDE, Prosernat, Tebodin middle east)
• Experienced in Conceptual Design, FEED, Basic Design, and Detailed Design in multi-
disciplinary EPC and MC projects within the Oil and Gas and Petrochemical industry
• Experienced in preparation of Technical Bid Evaluations (TBE)
• Experienced in leading HAZOP / SIL / QRA / HAZID studies and close outs.
• Recognized for efficient time and resource management ability to meet the project
schedule and cost milestones
• Handled any Process calculation and document preparation such Providing Process
Simulation, Sensitive Analysis, PFDs, P&IDs, H&M Balance, Control Philosophy,
Operation Manual, Shut down Philosophy and Diagram, Cause & Effect Matrix, Flare
Network calculations.
• Expert in Process Simulation, Steady State & Transient Hydraulic calculations and
Simulation, Surge Analysis, Blow down and Flare Network Design
Communication&
Teamwork Skills:
• Excellent organizational and interpersonal skills
• Good command of English language
• Self-motivated with a strong work ethic for developing multiple tasks and timeliness
Computer Skills: • Engineering Software: HYSYS, PRO II, ASPEN PLUS, PIPENET, PIPESYS, HTRI,
HTFS, FLARENET, FLARESIM, AFT Impulse, PIPEPHASE, PIPESIM, PIPEFLOW,
INSTRUCALC (PSV, Orifice, Control Valve Sizing), MS Office, AutoCAD, Naviswork
Engineering
Experience In
Following Process
Plants:
• Sour Gas Treatment Plant, (NGL Unit, Gas Sweetening and Dehydration Unit, SRU)
• Crude Oil Refinery Plant, (CDU, VDU, Stabilization, HDS, Fractionation, SWS)
• Gas Transmission Pipeline and Compressor Stations
• Crude Oil pipeline, Storing and Pump Stations
• Industrial Gas Production; Nitrogen, Oxygen (ASU), Hydrogen (Steam Reforming)
• LNG Plants (Cryogenic Process)
• Utilities and Off-sites
WORK EXPERIENCE .
Fateh Kimia Petrochemical (Fateh Group). (www.fatehgroup.com)
Senior Process Engineer July 2014 – Present
Project: Fateh Kimia Methanol Production Plant under license of Switzerland's CASALE (Production of 5'000
MTPD of grade AA methanol using natural gas trough conventional steam reforming unit together with an
auto-thermal oxygen reformer for the front-end section, combined with a high efficiency synthesis section where
the CASALE IMC reactor is installed)
• Basic Design (Preparing process deliverables, attending in HAZOP and SIL meeting as the Process Lead)
• Detail Design (Preparing process deliverables and calculations)
+39-327-237-3550
Rende (C.S.), Italy
About Eight years

2. WORK EXPERIENCE
DELVAR AFZAR Industrial Gases Co. (www.delvarafzar.com)
Senior Process Engineer December 2012 – June 2014
Project: Ilam Petrochemical Complex SRU (Sulfur Removal Unit ; SULFREX & HDS Process under License
of AXENS) : Production of 453.3 KTPA Sulfur free C3+ and 470 KTPA Sulfur free C5+
• Reviewed and endorsed the Process deliverables of Basic Package
• Prepared Process Simulation with HYSYS & PROII
• Performed Shell & Tube Heat Exchangers and Air Coolers Thermal design with HTRI & HTFS
• Prepared Single phase and Two phase line sizing and simulation with PIPESYS and PIPENET
• Performed Thermo siphoned re-boiler inlet and outlet two phase lines' calculations
• Performed Threes phase and Two phase Flash Drum and Separator (Horizontal & Vertical) sizing calculation
• Performed PSV and BDV relief load calculations and sizing as per API 521 with HYSYS Depressuring and
LESSER
• Prepared Flare network hydraulic calculations and simulation with FLARENET
• Performed Orifice, Flow Element and Control Valve Sizing with INSTRUCALC and FISCHER
• Developed the Detailed Design process deliverables e.g. PFDs, P&IDs and Process Control Philosophy
• Performed Surge Study analysis of 21 KM. feed stock Condensate Pipeline (Valve closure time calculation)
• Performed Flow Assurance and PVT analysis of sour hydrocarbon feed stock in plant upstream Pipeline
• Performed Minimum Design Metal Temperature (MDMT) study for Equipment and Piping Material Selection
• Reviewed the licensor's control and operating philosophy
• Contributed to Plot Plan review with other disciplines
• Prepared of Technical Requisitions and Equipment Datasheets
• Performed the Technical Bid Evaluations (TBE)
• Handled clarifications and kick off meetings with vendors
• Reviewed vendor documents to IFC status
• Communicated detailed design issues effectively with suppliers, clients, and other engineering disciplines
• Reviewed the safety specifications and roles regarding to process operation
• Ensured the proper application of the approved Project Design Codes
• Conducted HAZOP, QRA and SIL studies
Project: Air Separation LINDE (Oxygen) Plant (Cryogenic Plant) ; (Detail Design & Commissioning. Bandar
Imam 2 plant (LINDE Project No. 1410 ABPM)) ; 6000 Nm3
/hr OXYGEN and 13600 Nm3
/hr NITROGEN
• Reviewed Detail Engineering Design Phase Process documents review (Review of LINDE documents)
• Reviewed 3D modeling with Piping and Civil-Structure departments' Engineers
• Modified Process Control Design (Using HYSYS Dynamic)
• Took apart in Pre-commissioning and Commissioning activities under supervision of LINDE Germany
• Prepared Performance Curve and Surge line checking of SAMSUNG & ATLAS COPCO compressors
• Debottlenecking of Operation Engineers Punches to reach the Energy & Product specification guarantee value
• Prepared Operational Log sheets for plant to optimize some process control measuring ranges and set points
Project: Steam Reforming LINDE Hydrogen Plant (Brown Field Project); ( 700 Nm3
/hr Hydrogen Production
Plant, Revamping and Modifying existing LINDE plant)
• Prepared Process Simulation with HYSYS based on new different Natural Gas Feed Stock specification to
evaluate the Plant performance, de-bottle necking and trouble shooting of operational parameters' deviations
• Prepared Heat Exchangers and furnace Thermal Rating with HTRI & HTFS to evaluate the Performance
Efficiencies

3. ENERGY & INDUSTRY CONSULTING ENGINEERS (EIC) December 2008 – November 2012
Project: Ramin (Ahwaz) Thermal Power Generation Plant Extension with the generation capacity of (2×325)
MW (Utility and Off-sites; Conceptual Design to FEED. Client: MAPNA GROUP)
• (Lead of Process team) : Developed of PFDs, P&IDs, Process Description, Design criteria & Basis, Pumps
Hydraulic Calculations, Lines Sizing, (Atmospheric Tank effective capacity, bottom Steam Coil, vent & drain
calculations), Utility distribution Network simulations, Process data of Instrumentations and mechanical
datasheets, Surge Analysis with AFT Impulse, Gas Accumulator Sizing, API Oil separator Design, Shell&
Tube HX design, 3D model review, Feed Stock Pipeline Hydraulic and Flow assurance study
Project: Qeshm Star Crude Oil Refinery with Nominal capacity of 50,000 BPD for processing heavy or extra
heavy crude oils (Conceptual & Basic Design)
• Prepared Conceptual Scenarios Design Study
• Performed Process Simulation of Crude Oil Preheating, CDU, NGL Fractionation and Sour Water Stripper
• Prepared PFDs, P&IDs, Hydraulic Calculations, Lines Sizing (Single phase and Two Phase), Process Control
Philosophy, Process Datasheets, Cause & Effect, Blow Down calculations, PSVs load calculations, Utility
Flow Diagrams, Flare Network simulation, Heat Exchangers Thermal design, Operating Manual
• Performed Crude Oil Feed Stock Pipelines Hydraulic Calculations, PVT and Flow Assurance study
• Attended in HAZOP, QRA and SIL studies meeting
Project: Aviation Fuel Network Facilities for PHASE (II) IKA (Air Port) in Tehran (Conceptual, Basic &
Detail; Joint Venture with Tebodin Middle East Ltd.)
• Prepared Conceptual Scenarios Design Study, Developed PFDs, P&IDs, Process Description, Design Criteria,
Design Basis, Operating and Control Philosophy, Cause & Effect, Storage Tanks Nitrogen Blanketing
calculations, Fuel Distribution Network design
• Performed Hydraulic Calculations with PIPENET, Surge Study of Fuel Distribution Network by AFT Impulse
Project: Two Gas Compressor Stations on Eighth Iranian Gas Trunk Line (I-GAT-VIII) with capacity of 108
MMSCMD (Detail Design)
• Performed Basic Package Endorsement & reviewed Detail Design Engineering documents preparation
• Prepared Process Simulation with HYSYS , PFDs, P&IDs, Process Description, Shout Down Philosophy,
Blow Down Philosophy, ESD Block Diagrams, PSVs and BDVs Sizing, Cold Flare Network calculations with
FLARENET, Control Philosophy, Operation Manual, Air Cooler/ Heat exchanger Thermal design with HTRI
and HTFS, Cause & Effect, Line Sizing, 3D model review, Vendors' documents checking, Attend in HAZOP
Project: South Pars Gas Field Development Phases 15&16 Onshore Facilities with Total capacity of 2000
MMSCFD of Reservoir fluid (FEED, Extended FEED and Completion of Detailed Design) Cooperation with
joint venture of Nargan Engineers & Constructors and Sazeh Consultants)
• Prepared Detail Design Engineering documents (Basic Licensors; LURGI, Prosernat, AXENS, SULZER)
• Attended in field activities, construction, Equipment erection and Piping installation review
-----------------------------------------------------------------------------------------------------------------------------------------------
Multiphase and Process Simulation Center-University of Tehran September 2007 – September 2008
Project : Design, Installation and Commissioning of a Pilot Fluidized Bed gas phase Reactor
• Prepared calculation notes and instrument data sheets to procurement of instrumentations,
process Simulation of the compressed air production unit with HYSYS, Sizing the reciprocating air
compressor and air buffer, Operational Supervision of fluidized bed reactor Hydrodynamic behavior
EDUCATON
University of Tehran, Tehran, Iran Bachelor of Science in Chemical Engineering 2007
TRAINING COURSES
Oil Production- Total France (TPA) 2006 HTRI-Energy & Industry Co.(EIC) 2009
HYSYS-University of Tehran 2006 Flarenet-Energy & Industry Co.(EIC) 2010
Project Management-University of Tehran 2007 AFT-Impulse-Energy & Industry Co.(EIC) 2010