Javed Sultan has over 14 years of experience in process engineering for oil, gas, petrochemical, chemical and wastewater treatment projects. He has worked as a lead engineer and engineering manager on pre-FEED, FEED and detailed engineering projects in Qatar. He holds a Bachelor's degree in Chemical Engineering and has extensive experience using engineering software like HYSYS, HTRI, AutoCAD and SmartPlant.
Process Engineer having more than 13 years of experience in Oil and Gas based industry with exposure to detailed design EPCM and PMC Projects with clear understanding of managing the project within contract scope.
Process Engineer having more than 13 years of experience in Oil and Gas based industry with exposure to detailed design EPCM and PMC Projects with clear understanding of managing the project within contract scope.
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.ASHISH KUMAR
Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
1. Javed Sultan
Al Gassar Tower
12th Floor, West Bay
P.O. Box: 22961 +974-70524493
Doha, Qatar ersjaved@gmail.com
Date: 24-May-16
Fourteen and half years of experience in Process Engineering and Engineering for Oil &
Gas, Petrochemicals, Chemicals and Waste Water Treatment for Pre-FEED, FEED, Detailed
Engineering, including ZLD. Working as Lead Engineer-Process since the last seven years.
Also worked as Engineering manager for few projects.
PROFFESIONAL QUALIFICATION
Degree:
Bachelor of Engineering- Chemical Engineer in the year 2001
Skills:
Chemical Engineering related :HYSYS, HTRI. P&ID- Autoocad & Smartplant, Pump
Hydraulics, Line sizing, Control valve sizing, Heat and
mass balance, PFD’s, Technical Bid Evaluation
Technical Recommendation, Feasibility studies, Scop
of Work Preparation, Emergency Relief and Blowdown
load calculation, Relief valve sizing, Tanks selection,
waste water treatment, Flare header sizing using
Flarenet, Sterile radius, HAZOP & SIL, Pre-FEED, FEED and
Detailed Engineering.
International Codes
and standards : Safety Relief system API- 520, 521and 568.
Atmospheric tanks venting calculation- API-2000.
Tanks selection as per TVP and Flash point- API- 620,
650.
Shell DEPs for shell and tube exchanger design,
2. separator design, Internals selection, tanks selections,
Pumps selection, PEFS preparation etc.
Shell and Tube exchanger design- TEMA
Air Cooler- API-661
API and ASME pumps.
For Hazardous liquid classification and secondary
containment- NFPA 30, IP Part 19
Familiarity with QP standards, Chevron standards,
Exxon Standards.
PROFESSIONAL EXPERIENCE
Experience:
1. Chiyoda Almana Engineering, Qatar - Sept.’ 2012 - Present
2. Valdel Engineers and Constructors - Feb.’2012 - Sept.’2012
3. SK Engineering and Corporation, India - July’2010 - Feb.’2012
4. Uhde India Pvt. Ltd., India - Nov.’2007 - July’2010
5. Reliance Industries Limited - Sept.’2006 - Nov.’2007
6. HJI-Prop. GMMCO Ltd. - Oct.’2001 - June’2006
Projects done at Chiyoda Almana LLC.
Brown Field and Green Field Projects for Qatar Petroleum (QP), Ras Laffan Olefins
Company (RLOC), Qatar Gas, Ras Gas, Qatar Chemicals (QChem), Shell QPH.
#1 Pre-FEED for Ras Laffan Gasoline and Aromatics Complex- The RLGAP Complex shall
process 140,000 BPSD of hydro treated Stabilized Full Range Naphtha to produce
Gasoline, Benzene and Para-Xylene.
Position: Lead Engineer- Process
Role: Lead Engineer and Engineering Manager, Supervising team of Six Responsible
engineers and two designers. Responsible for Process Documents like UOP licensor
package evaluation, Utility Summary, Isolation Philosophy, Drain Philosophy, Flare and
Vent Philosophy, Process Design basis, Flare design Basis, Tank Farm Design basis, Utilities
sizing (steam, cooling water, Nitrogen, Instrument/ plant air, Fuel gas), Sterile radius
calculations, PFDs etc.
#2 FEED for installation of KODs at Glycol Carryover in GDU of Gas Dehydration Units for
QP.
Role: Lead Engineer, Supervising team of Four Responsible engineers and two designers.
Responsible for Process Documents like Operating data study, Site survey, PFD, PIDs and
3. PDS, KOD sizing, Internals selection, flare load calculations, Depressurizing Calculations,
Heat Exchanger Design-HTRI, PSV sizing, Pump hydraulics, In-tool, HAZOP, Inter
Department Coordination, Vendor Documents checking etc.
#3 Flare Closed System for Shell, Qatar- Received “Recognition Certificate” for the
contribution to the Project.
#4 Feasibility Study and FEED for Zero Liquid Discharge at QAFAC.
Study Report, Waste water analysis by third party, Waste water treatment scheme
development, Reuse option study, coordinating with Pretreatment, UF-RO vendors
coordination, PFD, P&IDs, Process datasheets etc.
#5 Brown Field Projects for Q-Chem, QAFAC.
Molten Sulfur Pumps and Loading System-Detailed Engineering
Utility Debottlenecking studies, Operational Improvement and Feasibility studies.
New Sparger Design for Spent Catalyst Storage Vessel -Detailed Engineering
MDEA Regenerator Trim Cooler Design.- Exchanger Design using HTRI
Utility Expansion for Third Boiler Study
IA/ UA Expansion Study
New PERC Drum-Detailed Engineering
Natural Gas Header study
H2S Removal Technology Selection
Additional Fire Water Tank -Detailed Engineering
Spare Ethane Sphere Storage- Detailed Engineering
Projects done at Valdel (S&B Houston):
Last Position: Principal Engineer
#1: LNG fractionation: Hydraulics, Relief Load Calculation and PSV sizing
#2: HPIB Debottle necking and loading system modification
Projects done at SKE&C:
Last Position: Senior Process Engineer
#1: Jurong Aromatic Complex, Singapore:
4. Jurong Aromatics Complex has been divided into three sections Condensate
Fractionation, Naphtha Hydrotreater and Aromatics Section, Naphtha Hydrotreater and
Aromatics section are being done from SKEC, Korea while Condensate fractionation
section is being done from SKEC, India. Condensate Fractionation section comprises nine
units- Condensate Fractionation, DHDS, LPG and Jet Fuel Merox, Light ends Fractionation,
Sulfur Recovery Unit, ARU, SCTU. The licensor for Condensate fractionation, Light ends
Fractionation, Merox unit, DHDS is UOP.
Role: Lead Engineer, Supervising team of seven Responsible engineers and four
designers. Responsible for Process Documents like PFD, PIDs and PDS, technical queries,
flare load calculations, PSV sizing, Pump hydraulics, In-tool, HTRI, HAZOP, Inter Department
Coordination, Vendor Documents checking etc.
#2: Padur Underground Oil Storage Cavern, ISPRL, India (Proposal)
Role: Lead Engineer, Responsible for Process documents and PDS, technical queries, flare
load calculations etc.
Projects Done At Uhde India:
Last Position: Senior Process Engineer
#1: Nagarjuna Oil Corporation Ltd.
Oil refinery Unit of 125,000 BPSD capacity at Cuddalore. Existing refinery from Wurthe
Germany has been shifted to Cuddalore; Uhde India bagged the order for Detail
Engineering of the Units- Pretreater, Semi Regenerative Reformer unit, Saturated Gas
Plant, Cold box, LPG unit, catalytic Hydro Desulphurization, MTBE and Isomerization unit.
The Licensors of the project UOP while CB&I Lummus has been the PMC contractor of the
project
Role: Worked as Area Lead engineer for the Isomerization Unit and MTBE unit from Nov.’09
onwards. P&ID development and review, HAZOP, SIL study, Line size validation, Pump
Hydraulics, Relief valve sizing, HTRI for heat exchangers including Thermo siphon reboilers,
Air Coolers and Column Internals Enquiry specifications, Technical Bid evaluation,
Technical Recommendation Preparation, Process Data sheets to Rotating Department,
Instrument Department and Mechanical Department. P&ID updation etc.
#2: Aditya Birla Chemicals Ltd, Rehla:
Expansion of 225 TPD caustic plant to 300 TPD caustic plant. Uhde India being the
Technology Licensor has done the Basic engineering package as well as Detail
engineering for the project
Role: Worked as Lead Engineer for one year. Basic Engineering package-Design basis
preparation, equipment sizing and Equipment list preparation, Aspen simulation , Heat
and Material balance, Process and flow Diagrams Preparation, P&ID preparation, HTRI
for Shell and Tube Heat Exchangers, Enquiry specifications for Process special parts like –
Orifice, Safety valves, Filter internals etc. Process data sheets to Mechanical, Instrument
and Rotating Equipments. Detail engineering- P&ID updation upto As- built issue, Control
valve sizing, Isometric checking, PDMS review, Pump hydraulics review etc.
5. #3: Nirma Ltd, Kalatalav, Gujarat
225 TPD grassroot Caustic Chlorine Plant. Uhde India being the Licensor of Technology
has done the Basic and Detail Engineer of the project.
Role: Worked as Support Engineer for one year. Fortran Simulation, Complete Basic and
Detailed Engineering of the Project.
#4: Sales Support for LSTK offers:
Hydrogen Plant and Sulphur recovery Units of IOCL plant at Paradip and NOCL, Licensor-
UOP.
Role: PFD, P&ID Preparation, Hours estimation, Equipment List Preparation, PDS
preparation etc.
Projects done at Reliance Industries (Technical services):
Last Position: Manager-Process
#1: Parallel Dry Chlorine Filter for Caustic Chlorine plant
Role: Preparation of P&ID, HAZOP, Layout study and Project execution.
HJI-Prop. GMMCO Ltd (Birla Technical Services):
Last Position: Process Engineer
Plants operation for two years then worked at Birla technical Services, New Delhi as
Process Engineer for two and half years at following projects:
#1: Southern Petroleum industries Corporation (SPIC):
OSBL Tank Farm EPC for SPIC, worked as Process Engineer
Role: Worked as Process Engineer, P&ID, PFD, Line list, PDS and HAZOP.
#2: SAHARA Petrochemicals- Saudi Arabia:
Proposal work for Grassroot Chlor-alkali plant at SAHARA petrochemical complex.
Role: Worked as Process Engineer, P&ID, PFD, Line list, PDS and estimation.
6. HONOR
1. Certificate of Recognition from Shell, Qatar for the contribution to “Flare Closed Drain
Project”.
2. Certificate of Recognition from Chiyoda Almana for the 1st and 2nd Quarter 2014.
3. Being awarded BEST WORK AWARD for the year 2005.
PERSONAL DETAILS
Date of Birth : 15-June-1979
Passport No. : H-9131323
Permanent Address : I-33/13, First Floor, Batla House Extn., Jamia Nagar, New
Delhi- 110025
Javed Sultan