Mr. Ahmed Haridy Abdel Hameed has 9 years of experience in oil and gas process design, simulation, and flow assurance studies. He has worked on projects involving commissioning, HAZOP studies, debottlenecking studies, and production optimization. He is proficient in process simulation software such as Aspen HYSYS, Aspen Flare System Analyzer, HTRI, PIPESIM, OLGA, AutoCAD P&ID, and AutoCAD Plant 3D. He holds a Master's degree in Natural Gas Engineering and has authored several research papers.

1. MR. AHMED HARIDY ABDEL HAMEED _ mobile: +20 111 666 4607 / e-mail: Aharidy@petrobel.org _ Ahmedharidy808@yahoo.com
09/2015 Page 1 of 3
AHMED HARIDY ABDEL HAMEED
SENIOR PROCESS ENGINEER
SUMMARY OF KEY QUALIFICATIONS:
- EXPERINACE SUMMARY: 9 years of experience in oil and gas processes design, rating and verification,
and flow assurance study using various process simulation software. Participate in commissioning and
startup of many projects. Involved in many HAZOP studies and design review. Responsible for
production monitoring, debottlenecking studies and chemical consumption optimization. Develop
optimization studies for the existing facilities to maximize the production. Issuing daily, monthly and
annually production reports. Prepare engineering operational budget.
- RELEVANT AREAS OF SIMULATION EXPERTISE: Hands on with good command of Aspen HYSYS, Aspen Flare
System Analyzer, HTRI-exchanger suit, PIPESIM, OLGA, AutoCAD P&ID and AutoCAD Plant 3D.
- RELEVANT AREAS OF ADMINISTRATIVE EXPERTISE: strategic planning, project management, project
contract and quality management, organization behavior, business finance. Great experience in
implementing a technical presentation and highly communication skills.
EDUCATION:
2016 Master in Natural Gas Engineering (Design of mini-plant to recover NGL’s from small amounts of
Associated gases produced in Egyptian western desert), Cairo University, mining studies and
Research center, Department of petroleum engineering.
2012 Diploma in Natural Gas Engineering, Cairo University, mining studies & research center,
Department of petroleum engineering.
2005 B.Sc. in Chemical and Petroleum Refining Engineering, Suze Canal University, Department of
Petroleum refining.
2014 Mini-Master of business administration in Project Management, Knowledge.
EXPERIENCE:
2007 Production engineer, El Gamil Gas Plant, PETROBEL
-Monitoring the operation conditions for No.35 offshore gas wells, No. 14 gas treatment units/LTS
with associated No. 8 stabilization units with design capacity of 1BCFD gas and 50,000 BBLD of
condensate.
-Issuing daily, monthly and annually reports, issuing and follow up maintenance activities.
2008 Production engineer, Nile Delta Field, PETROBEL
-Monitoring the operation conditions for No.20 onshore and offshore gas wells, No. 6 gas
treatment units/LTS with associated No. 3 stabilization units with design capacity of
210 MMSCFD utilizing diethylene glycol as a hydrate inhibitor, No. 2 LPG recovery plant where
Molecular sieves are used for gas dehydration and turbo-expander to supply the required the
refrigeration level, with capacity of 540 MMSCSFD, 7000 BBLD AND 250 TON of LPG for both, No.4
glycol regeneration system, Gathering network, and water treatment system.
-Issuing daily, monthly and annually reports, issuing and follow up maintenance Activities.
-Participate in supervising and inspecting the conditions of the mole-sieve bed during the
replacement and perform a quality control for loading and unloading of the mole-sieve process.

2. MR. AHMED HARIDY ABDEL HAMEED _ mobile: +20 111 666 4607 / e-mail: Aharidy@petrobel.org _ Ahmedharidy808@yahoo.com
09/2015 Page 2 of 3
2009 Production engineer (Company man), Fayrouz Field, PETROBEL
-Participate in the basic engineering phase, accountable for the plant HAZOP study and
design review. Involved in the construction phase with projects department, commissioning and
start up to normal operation.
-Accountable for the operating and maintenance of the producing well HCU and its solar cell
system.
- Monitoring the operation conditions for No.1 LTS unit with its associated stabilization unit, with
capacity of 20 MMSCD and 1500 BBLD of condensate.
-Issuing daily, monthly and annually reports, issuing and follow up maintenance Activities.
-Perform a debottlenecking study to overcome the high plant inlet temperature and maximize
the recovery by implementing a water cooling system using Aspen HYSYS and HTRI exchanger
suit.
2011 Production engineer, SINAI Field (SAGP), PETROBEL
-Monitoring the operation conditions for No.2 trains of LPG recovery plant form associated
gases with capacity of 50 MMSCFD, 1400 BBLD and 287 TON of LPG, using propane mechanical
refrigeration system.
-Issuing daily, monthly and annually reports, issuing and follow up maintenance Activities.
-Participate in the overhauling of the 2 plants, including turbines maintenance, vessels and heat
exchangers dismantling and cleaning.
2012 Senior process engineer, Cairo head office, PETROBEL
-Responsible for monitoring all the company fields production and issuing a summary daily
report to managing director.
-Building a data base for all company field production, process key parameters and operating
conditions, chemical consumption, monitor the daily variation, investigate the causes and
response to the plants Operation.
-Building plans for the plant configuration changes and/or modifications in order to match the
foreseen mode of operation, production profiles or/and products specs updates, through the
optimization of existing facilities utilization and/or installing new ones.
-Perform debottlenecking studies by Proceed continuous process simulation for current and
foreseen changes and/or modifications using Aspen HYSYS.
-involved in the conceptual design of Ras Gara zero flaring project including the choosing of the
optimum recycle gas compressors, finding optimum Piping routs to the SAGP plant and verifying
the capability of the plants for handling the new capacity.
- Issued a technical/feasibility study to improve the performance of El Gamil gas treatment plant
by utilizing waste heat produced from No. 4 frame five turbines for heating the raw condensate
and produce power for plant consumption and for export to national grid by using of organic
Rankine cycle.
-perform a verification study for No. 14 shell and tube heat exchangers for El Gamil gas
treatment plant after rich gas reallocation to the LTS units by using Aspen HYSYS and HTRI.
-Participate in the basic design of El Gamil gas treatment plant liquid production increase to verify
If the existing liquid facility can accommodate the future liquid increase and to solve the frequently
plugging of the condensate boiler coils caused by water carry-over.
-perform a verification study for No.35 offshore well flow line in terms of erosion velocity according
to API RP 14C criteria using Aspen HYSYS.
-involved in preparing the SOP (stander operating procedures) and EOP (emergency operating
procedures) for Abu Madi and El Qar’a LPG recovery plant and accountable for lock out and tag
out of all PSV’s and BDV’s for the previous mentioned plants safety improvement.
-participate in El Gamil plant HAZOP study for the onshore new and existing plants, and offshore
platforms.
-develop process flow diagrams (PFD) and process and instrumentation diagrams P&ID’s using
AutoCAD Plant 3D suit.
-accountable for NOOROS field development plan, making a short term and long term plan to
accommodate the production through an existing or a new gathering network to the existing
facilities. A flow assurance study was performed using PIPSIM and OLGA to verify the criticalities
of the system, pipeline sizing, transportation capacity vs. the pressure, glycol injection and
hydrate issue, erosion velocity and slug catcher sizing.

3. MR. AHMED HARIDY ABDEL HAMEED _ mobile: +20 111 666 4607 / e-mail: Aharidy@petrobel.org _ Ahmedharidy808@yahoo.com
09/2015 Page 3 of 3
PUBLICATIONS AND CONTRIBUTIONS:
2015 Author of a research paper on “improve the performance of natural gas processing plants by
utilizing waste heat for process heating and power generation purposes - El Gamil plant case
study”, paper submitted to the Offshore Mediterranean Conference and Exhibition (OMC-2015),
Ravenna-Italy.
2016 Author of a research paper on “the application of steady state and transient multiphase flow
simulations to ensure optimal design and operations of wells and surface networks for new
Nidoco north west concessions”, paper submitted to the Mediterranean Offshore Conference
and Exhibition (MOC-2016), Alexandria-Egypt.
2016 Author of a research paper on “Mini plant for NGL recovery from associated gas, design of
refrigeration and fractionation packages”, paper submitted to the Mediterranean Offshore
conference and Exhibition (MOC-2016), Alexandria-Egypt.
COURSES ATTENDED:
2008 - 5 days LPG technology - Oil and gas skills
2009 - 5 days Gas processing plan troubleshooting and startup - Oil and gas skills
2010 - 5 days HYSYS process simulator - ENPPI
2010 - 5 days Comprehensive HSE - Petrosafe
2013 - 5 days Air-cooled exchanger design - ENPPI
2013 - 5 days Shell and tube exchanger design - ENPPI
2014 - 5 days Environmental risk assessment - Bayan
2014 - 5 days Flare system design and rating - ENPPI
2015 - 2 days Introduction to flow assurance - Schlumberger
2015 - 3 days OLGA flow assurance - Schlumberger
2015 - 3 days OLGA advanced flow assurance - Schlumberger
2015 - 5 days PIPESIM fundamentals – Schlumberger
2015 - 3 days AutoCAD Plant 3D suit – ITS