1. RESUME
M. Moses Mohanraj
Process Engineer
Mobile: +91-9751236487
Email: mmosesmohanraj@gmail.com
Objective:
To join and excel in an Engineering organization that gives me an opportunity to apply my
knowledge and contribute my experience as a Process Engineer.
Professional Summary:
 6 years and 01 months of PROCESS DESIGN experience across OFFSHORE AND ONSHORE.
 Knowledge and experience in API codes STD.
 Process Line hydraulics for Gas, Liquid and Mixed Phase.
 PSV sizing for scenarios like Fire case, gas blow by & blocked discharge.
 Simulation by Hysys 7.2.
 Flare analysis by flare net analyzer version 8.6.
 Depressurization by Hysys 7.2.
 PFD Preparation for offshore oil and gas plant.
 P&ID Preparation for offshore oil and gas plant .
 Cause and Effect chart preparation for offshore oil and gas plant.
 Pump sizing, head and NPSH calculation for various pumps.
 Preparing Utility consumptions at farthest place consumers.
 Preparing process data sheets.
Software Proficiency:
 Flare net analyzer 8.6
 HYSYS 7.2
 Pipe Sim
 Auto cad 2007
 Smart Plant Instrumentation(SPI)

2. RESUME
Professional Experience:
I. Company: Thyssen Krupp Industrial Solutions Private Limited, Pune.
Designation: Process Engineer
Year: September, 2015 to july, 2016.
Projects Handled:
1. Revamp of DIiesel hydro desulphurization plant (CPCL , Chennai)
 Adequacy check of Flare header for existing Plant by flare net analyzer
 Sizing of Acid KOD, Feed KOD,SWS off gas KOD.
 Preparation of Process data sheet Acid KOD, Feed KOD,SWS off gas KOD.
 Preparing Adequacy report of Flare header.
 Preparation of hydraulic study report for process & utilities lines.
 Hydraulics for pumps & control valves.
 Preparation of Instrumentation & Process data sheet for Pressure indicator & transmitters.
 Preparation of Line list & Tie in list
 PSV Sizing for major cases like fire case & liquid blocked outlet.
 Giving inputs for instruments like control valve, flow element, PI,TI.
2. Revamp of DIiesel hydro desulphurization plant (IOCL, Chennai)
 Preparation of Line list and Tie in list
 Sizing of Fuel gas KOD, Feed LP Condensate drum, MP blow down drum.
 Preparation of Process data sheet Fuel gas KOD,Feed LP Condensate drum,MP blow down
drum.
 Adequacy check of Flare header by flare net analyzer.
 Preparing Adequacy report of Flare header.
 Pump hydraulics
 Control valve hydraulics.
II. Company: Ramboll India (P) Limited, Chennai.
Designation: Process Engineer
Year: October, 2014 to September 2015.
Projects Handled:
1. Reggane Nord development Project (Deputed to Petrofac , Chennai)
 Preparation of hydraulic study report for process & utilities lines.

3. RESUME
 Hydraulics for pumps & control valves.
 PSV Sizing for major scenarios.
 Preparation of Line list & Tie-in List.
2. Rabab Harweel Integrated Project (Deputed to Petrofac , Sharjah)
 Preparation of air coolers and heat exchangers datasheet for liquid handling sections.
 Hydraulics for pumps.
 Vendor offers for air coolers & heat exchangers.
III. Company: VP Petro6 Engineers and Consultants (P) Limited, Chennai.
Designation : Process Engineer
Year: May, 2010 to October 2014.
Projects Handled:
1. Simulation Report for Fuel gas Conditioning Package
 Simulation for fuel gas conditioning skid by using hysys 7.2 in different cases.
 Preparation of PFD.
2. Depressurization Study Report for Fuel gas Start-up heater E-6961
 Preparation of Depressurization study report.
 Depressurization study in Hysys 7.2
3. Up gradation of Firewater Spray System in Transformer Bay Area
 Preparation of Hydraulics Report.
 Preparation of Deluge Valve Datasheet.
 Modification of Firewater P&ID.
4. Revamp of Unmanned Platforms -14No’s-Well Head Off-Shore Bidding Project
 Preparation of Line List.
 Preparation Equipment list
 Review and Mark up of P&ID’s.
 Review of Process Datasheet for Equipments.
 Review of Process Datasheet for Instruments.
 Adequacy Check for Test Separator.
5. ONGC- 3CLAMP ON EXTENSION PLATFORM – PRE BIDDING & DETAIL ENGINEERING

4. RESUME
 Preparation datasheet and Sizing of PSV for PCV failure Case.
 PSV Inlet and outlet pipe Sizing.
 Review and Preparation of Line Sizing Calculation and Report.
 Review and Preparation of Line List.
 Preparation of Process Datasheet of Crude Condensate vessel
 Preparation of Process Datasheet of Instruments
 Preparation of Process flow diagram for HG,HJ,HZ Platform
 Preparation of P&ID for well head, lift gas manifold, production manifold and crude
condensate vessel to HG,HJ,HZ Platform.
 Preparation of Safe chart for HG, HJ, HZ platform.
6. CB/OS2 BLOCK-NITROGEN BLANKETING OF CRUDE OIL STORAGE TANKS
 Preparation of Process Design Basis.
 Preparation of Study of alternatives.
 Preparation of Vapour balancing Line Sizing Calculation and Report.
 Review and Preparation of Line List.
 Preparation of Process Datasheet of Instruments
 Preparation of Process flow diagram Nitrogen Blanketing System.
 Preparation of P&ID for Nitrogen Distribution Header, Condensate tank A,B&C, Nitrogen
Plant.
7. CB/OS2 BLOCK-CBX SEPARATOR
 Preparation of Process Design Basis.
 Preparation of Process flow diagram for CBX Separator.
 Preparation of P&ID for CBX-Separator.
 Review of Line Sizing and Line list
 Sizing of Vertical CBX-Separator
 Preparation of Process Datasheet of Instruments.
 Preparation of Process Datasheet of CBX Separator.
 Preparation datasheet and Sizing of PSV for Fire Case
 PSV Inlet and outlet pipe Sizing.
8. CB/OS2 BLOCK-Firewater Line Extension in Phase II
 Preparation of Process Design Basis.
 Preparation of Process flow diagram for Fire water to Helipad.
 Review of Line Sizing and Line list.
 Preparation of Fire water Hydraulic Study Report.
 Sizing of Pipe line By using Pipe flow Expert.

5. RESUME
9. ONGC- BPA-BPB-RC Project – PRE BIDDING
 Preparation of Replacement Line list.
 Preparation of Equipment Datasheet
 Preparation & Modification of P&ID
Educational Qualification:
 Bachelor of Technology (chemical Engineering) from St.Peter’s Engineering of College
Affiliated to Anna University, Chennai by April 2010 with 73.4%.
 Diploma in Petrochemical Engineering from CPCL polytechnic of college, Chennai by 2007
with 67%.
Personal Details:
Name : M. Moses Mohanraj.
Date of Birth : 07-10-1988
Marital Status : Single
Father’s Name : Mr.D.Masilan Issac
Gender : Male
Languages Known : English, Tamil, Hindi,
Religion : Christian
Nationality : Indian
Passport No : J8547188. Expiry Date: 01/12/2021
Permanent Address : No: 8,Thiruvalluvar Salai, NGO Nagar
Ponneri - 601204.
Thiruvallur Dist,
Tamil Nadu. India.
DECLARATION:
I hereby declare that the information and facts stated above are true to best of my
knowledge and belief.

6. RESUME
Yours faithfully
M. Moses mohanraj

7. RESUME
Yours faithfully
M. Moses mohanraj