Muhammad Masood is seeking to enhance his professional skills. He has over 24 years of experience in design engineering, project management, and procurement. He has extensive experience designing pressure vessels, columns, reactors, storage tanks, and heat exchangers. Masood has worked on numerous projects for Saudi Aramco and has designed over 200 pressure vessels, tanks, and other equipment during his career.

1. RESUME (IRC121758)
Muhammad Masood
Olayan Descon Engg.Co
Jubail Industrial City. KSA
Nationality : Pakistani
E-mail mmasood@olayandescon.com
Educational Data B.Sc Engineering (UET Lahore Pakistan)
Objective , To enhance more Professional Skills in a Company like (Mustang).
Summary Of Skills
• 24 years of experience in Design engineering , Project management &
Procurement.
• Excellent working knowledge of following codes & standards, ASME
Sec. VIII (Div.1 & 2). ASME B31.3,B16.5,B16.9 , B16.10,B16.11,
B16.20,B16.21,B16.25,B16.34,B16.36,B16.47, B36.10,B36.19,
ANSI,ASTM,UBC,ASCE,TEMA,API650,API660,NACE,WRC107 /
297, AWWA , SAES (Saudi Aramco Engineering standards), SES
(Sabic Engineering Standards) & PIP.
• Extensive experience in Basic & Detailed engineering of Pressure
vessels , Columns, Reactors, Storage tanks , Heat Exchangers & Steel
Structure .
• Expert in reviewing of basic & detailed engineering work to ensure
compliance with applicable engineering codes & standards, Project
specification & statutory regulatory requirements.
• Experienced in material selection, Project cost estimation & preparing
detailed engineering packages.
• Sound knowledge of Preparation of Project execution plan covering
objectives, priorities and directives to be followed and constrains to be
imposed on the design & procurement activities.
• Monitoring and controlling of construction activities as per schedule and
Health, Safety & Environment (HSE) requirements.
Present Experience ( Jan 3, 2003 to Date )
• Delivered as Senior Design Engineer / Section Head Design / Principle
Design Engineer in Olayan-Descon Engg Co. in (Saudi Arabia)
SAUDI ARAMCO PROJECTS

2. • Khuraise Crude Contract ,Saudi Aramco (Dec 2003).
o 20 SS vessels (Gas corrosion inhibitors)
• Uthmaniyah Sulfur Plant ,Saudi Aramco.
o 10 sulfur coalscer vessels ( with heating coils & jacketed)
• Amine treating facility, Rabigh Refinary complex ,Saudi Aramco.
o 01 cladded stripper column
• Safaniyah Gosp Pump station , Saudi Aramco (2004) (Enppi.as EPC)
o Sand sludge vessel
o Low pressure production trap (LPPT)
• Shaybah Central Processing Facilities , Saudi Aramco (2005).
o High pressure production trap (HPPT)
o Low pressure production trap (LPPT)
o Intermediate pressure production trap (IPPT)
o Water & oil seperator (WOSEP)
• Compression & De-Ethanizing Plant. Saudi Aramco.
o Inlet gas filter coalescer , cladded vessel
o Inlet sour Gas separator , cladded vessel.
• Hydrogen Plant 2, Riyadh Refinary , Saudi Aramco.
o One no of pressure vessel.
• Khursaniyah Gas Plant
o 24 pressure vessel for Saudi Aramco (2007) (Bechtel Technip as EPC)
• HNRP NGL Recovery Trans 1,2 & 3 at Hawiyah , Saudi Aramco.
o Design of 12 pressure vessels
• Jumayiah Gas plant
o Instrument Air surge drums
• Diesel Hydrotreating unit , Riyadh Refinary
o 23 pressure vessels through Technip Italy spa
• Diesel Hydrotreater Unit , Yanbu Refinary .
o H.P Amine Absorber
o Stripper column
o LP Amine Absorber
o Nephta Satblizer
o Sour Water stripper column
o Vent Gas absorber for sour water stripper
• Construction of Power Plant (B6-109) at Ras Tanura .
o High pressure Scrubber
o Condensate recovery vessel
o High pressure knockout drum
o Low pressure Scrubber
• New Coalscer Reflux Drum for Jeddah Refinery
Storage Tanks
• Design of 23 Storage tanks (c.s / ss) for Saudi Kayan project.
• Design for double walled tank for Saudi Kayan .
• Design for 08 tanks for Karan Gas Filed (Saudi Aramco)
• Design for 05 Rectangular Tanks for Siemens’ (Saudi Aramco Safaniah Project)
• Design of 48.5 m tank for Marafiq (Saudi Arabia)
• Design for 02 tanks for Sipchem , Saudi Arabia.
• Design for 08 shop fabricated tanks for Petrokemya.
• Design for 16(shop & field fab.) tanks for Safco (Petrokemya)
• Design for 07 (field fab) tanks for Petrokemya

3. • 06 tanks for Technip
• Design for BLCT (Port Project), more than 20 tanks
• Design of 28 tanks for Sadara Project through Tecnicas
• Design for 06 tanks for Jazan (Saudi Aramco) through Dragados, in progress
• Designof 16 tanks for Jazan (Saudi Aramco) through Technicas Reundas, in progress
All these are of API 650, API 620, shop & Field fabricated.
Professional Responsibilities
1) Review Project & Scope of work
• Equipment data sheet & reference drawings.
• Client specification & standards
• Prepare material Requisitions as per client requirements & Engineering
Standards.
2). Site visit for field verification.
3). Co-ordination with ASME inspector for ASME Coded jobs.
4). Correspondence with design sub-contractor for technical clarifications.
5). Prepare and maintain documents for compliance ISO 9001.
6). Provide technical support to,
• Technical support to material procurement department.
• Technical clarification, thickness calculation / confirmation &
Estimation of design/drafting of design equipment for proposal dep’t
for quotations.
• Technical clarification & review bill of material (BMR) of critical
items for Planning Department.
• Technical evaluation of quotations of critical items like internal
trays, demister pad, Int. Screens and dish heads etc.
• Technical Support to Fabrication shop.
7) Supervision of Cad drafting for preparation of General assembly drawing,
fabrication drawings, As-Built drawings and equipment data sheets.
This includes the following responsibilities
• Design data.
• Thickness and dimensions.
• Compliance of design code and client specs/standards.
• Selection of material of construction in accordance with client specs and
code.
• Shop and field testing
• Requirement of material testing including Heat treatment, Impact testing,
HIC testing etc. in accordance with code and client specs.
• Requirement of non-destructive testing including radiography, Ultrasonic
testing & MPI.
• Surface preparation & paint requirement in accordance with client specs.
• Welding requirement.
• Bill of material.
Post Experience
From 01 Jan, 1989 to Dec.2002 (13 years) in Heavy Mechanical Complex
(Taxila) Pakistan.

4. Worked at various positions from Trainee engineer, Design engineer to Senior
Design engineer.( Deputy Manager ).
Responsibilities, field of Job & Projects
• Detailed engineering of Static Equipment i.e Pressure vessels , Columns,
Reactors,
• Replacement work for Sulpher Recovery Unit at Dakhni oil Field (OGDC
Pakistan)
• Compete design for Pressure vessels for Qadir Pur Oil field.(Pakisatn)
• Design of LPG tanks for Shell for filling stations (Pakistan) , 100 nos.
• Layout preparation & Detailed engineering of the Equipment used in
Cement Plants, e.g. Stone crushers, Mill Hoppers, Kiln Shell , Belt
conveyors , Air slide type cement conveyors, Bucket elevator, Cement
storage Silos & Its Aeration system. Key Projects are as under
• Fecto Cement Plant. (Pakistan)
• Kohat Cement Plant (Pakistan)
• Ghareeb Wal Cement Plant (Pakistan)
• Lucky Cement Plant. (Pakistan)
COMPUTER / SOFTWARE EXPERIENCES:
Work experience in software like COMPRESS (Pressure Vessel Design ), PV-
Elite (Pressure Vessel Design ), Nozzle PRO (Finite Element Analysis for
Pressure vessels, Heat Exchanger Nozzles) , B-JAC (Heat exchanger Design ),
TANK (Storage Tank Design), COMPRESS for Heat Exchanger design &
AutoCAD, M.S Word, MS Excel,