Hose test bench ppt
•Download as PPTX, PDF•
0 likes•543 views
The document describes a hose pressure testing system with the following key features: 1. It has a test chamber with a transparent lid to view hoses under pressure during testing. 2. An inlet and outlet manifolds in the test chamber connect hoses to the system for intrinsic safety testing. 3. The system can test up to three or four hoses simultaneously.
Report
Share
Report
Share
Recommended
Test pac
Paskals TestPAC is a self-contained, compressed air-powered device that can generate liquid pressures up to 100,000 PSI for on-site high pressure testing. It uses a reliable Haskel pump known for its long life and low maintenance. The TestPAC operates by using a plant air supply of at least 8 bars to boost an inlet liquid to pressures as high as 100,000 PSI through a reciprocating piston system, with automated controls for ease of operation.
Cng high pressure regulator testing bench ppt
This unit conducts cycling tests of up to 50,000 cycles on CNG regulators as specified in ISO 15500-9:2001(E), pressurizing and depressurizing components at various test pressures and temperatures. It also performs leak testing at high pressures. The unit has a user-friendly software interface, PLC control, a high-pressure reservoir up to 300 bar, safety interlocks, mobility, ergonomic controls, and can test multiple points, making it useful for OEMs.
Hydraulic flushing rig ppt
This document describes the specifications of a hydraulic flushing rig. It can be used to clean systems contaminated with large amounts of debris. The rig contains:
- A 300 liter stainless steel tank for hydraulic oil
- Pumps capable of 58 LPM at 350 kg/cm2 pressure
- Filters down to 2 microns to clean the oil
- A heat exchanger to control oil temperature below 60°C
- All piping and fittings are stainless steel for use with water or oil-based fluids
- Gauges and controls mounted on a stainless steel panel
- It can clean systems to a NAS 6 cleanliness standard and is certified.
N2 and co2 filling system
The test rig is a pneumatic system designed for safety, user-friendliness, and to meet all requirements in the design document. It allows an operator to independently complete all specified tests. Haskel pumps are used due to their long life and low maintenance. The test rig features easy start/stop functionality, variable cycling speed control, self-lubricating seals, and is reliable, easy to maintain, compact, and robust. It is equipped to perform static pressure testing up to 3400 PSI using pressure transmitters, gauges, filters, and proportional pressure regulators for controlled filling via CO2 and N2 Haskel pumps. The front panel includes an HMI for auto mode control and an emergency stop
Hst ppt
The universal hydraulic servicing trolley is designed to provide pressurized hydraulic oil from its reservoir to the systems of different aircraft types for testing purposes. It can simultaneously supply two independent aircraft hydraulic systems. It is used on aircraft like the Sukhoi Su-30MKI, MiG-29, MiG-21, Mirage 2000 and Hal Tejas. The trolley documentation provides specifications, operating procedures and safety guidelines for its use.
Hose test bench ppt
The document describes a hose pressure testing system. It has a test chamber with a transparent lid to view hoses under pressure. It can test up to three or four hoses at a time through inlet and outlet manifolds inside the chamber. An ergonomic control panel allows single operator control for safe operation. The system uses a Haskel pump for quick pressurization and has safety features like an overpressure relief valve.
Hose test presentation
To test fire hoses, attach an inline pressure gauge and gated valve between the pump panel and hose using necessary 2 1/2 inch sections and adapters, mark the hose at couplings, bleed air from the line, close the gated valve, and pressurize the line to either 200 pounds for 4-inch and 5-inch hoses or 300 pounds for 2 1/2-inch or smaller hoses for three minutes to check for leaks.
Dv test rig
The system is designed to test the performance of distributor valves used in coach and wagon braking systems. It consists of a brake pipe, auxiliary reservoir, brake cylinder and control reservoir. The system can automatically run through a predefined test sequence or allow manual testing of individual components. It uses compressed air at pressures up to 10 kg/cm2 and has safety features to prevent contact with sensors or circuitry during operation. Proper procedure and safety precautions must be followed when using the system.
Recommended
Test pac
Paskals TestPAC is a self-contained, compressed air-powered device that can generate liquid pressures up to 100,000 PSI for on-site high pressure testing. It uses a reliable Haskel pump known for its long life and low maintenance. The TestPAC operates by using a plant air supply of at least 8 bars to boost an inlet liquid to pressures as high as 100,000 PSI through a reciprocating piston system, with automated controls for ease of operation.
Cng high pressure regulator testing bench ppt
This unit conducts cycling tests of up to 50,000 cycles on CNG regulators as specified in ISO 15500-9:2001(E), pressurizing and depressurizing components at various test pressures and temperatures. It also performs leak testing at high pressures. The unit has a user-friendly software interface, PLC control, a high-pressure reservoir up to 300 bar, safety interlocks, mobility, ergonomic controls, and can test multiple points, making it useful for OEMs.
Hydraulic flushing rig ppt
This document describes the specifications of a hydraulic flushing rig. It can be used to clean systems contaminated with large amounts of debris. The rig contains:
- A 300 liter stainless steel tank for hydraulic oil
- Pumps capable of 58 LPM at 350 kg/cm2 pressure
- Filters down to 2 microns to clean the oil
- A heat exchanger to control oil temperature below 60°C
- All piping and fittings are stainless steel for use with water or oil-based fluids
- Gauges and controls mounted on a stainless steel panel
- It can clean systems to a NAS 6 cleanliness standard and is certified.
N2 and co2 filling system
The test rig is a pneumatic system designed for safety, user-friendliness, and to meet all requirements in the design document. It allows an operator to independently complete all specified tests. Haskel pumps are used due to their long life and low maintenance. The test rig features easy start/stop functionality, variable cycling speed control, self-lubricating seals, and is reliable, easy to maintain, compact, and robust. It is equipped to perform static pressure testing up to 3400 PSI using pressure transmitters, gauges, filters, and proportional pressure regulators for controlled filling via CO2 and N2 Haskel pumps. The front panel includes an HMI for auto mode control and an emergency stop
Hst ppt
The universal hydraulic servicing trolley is designed to provide pressurized hydraulic oil from its reservoir to the systems of different aircraft types for testing purposes. It can simultaneously supply two independent aircraft hydraulic systems. It is used on aircraft like the Sukhoi Su-30MKI, MiG-29, MiG-21, Mirage 2000 and Hal Tejas. The trolley documentation provides specifications, operating procedures and safety guidelines for its use.
Hose test bench ppt
The document describes a hose pressure testing system. It has a test chamber with a transparent lid to view hoses under pressure. It can test up to three or four hoses at a time through inlet and outlet manifolds inside the chamber. An ergonomic control panel allows single operator control for safe operation. The system uses a Haskel pump for quick pressurization and has safety features like an overpressure relief valve.
Hose test presentation
To test fire hoses, attach an inline pressure gauge and gated valve between the pump panel and hose using necessary 2 1/2 inch sections and adapters, mark the hose at couplings, bleed air from the line, close the gated valve, and pressurize the line to either 200 pounds for 4-inch and 5-inch hoses or 300 pounds for 2 1/2-inch or smaller hoses for three minutes to check for leaks.
Dv test rig
The system is designed to test the performance of distributor valves used in coach and wagon braking systems. It consists of a brake pipe, auxiliary reservoir, brake cylinder and control reservoir. The system can automatically run through a predefined test sequence or allow manual testing of individual components. It uses compressed air at pressures up to 10 kg/cm2 and has safety features to prevent contact with sensors or circuitry during operation. Proper procedure and safety precautions must be followed when using the system.
Anesthesia Machine
The document summarizes the key components and functions of an anesthetic machine. It describes the high pressure and low pressure systems, including gas supplies, cylinders, manifolds, regulators and flow meters. It explains the purpose and mechanisms of vaporizers and breathing circuits. Safety features like oxygen failure alarms and leak tests are also summarized.
Test pac
Paskals TestPAC is a self-contained, compressed air-powered unit that can generate liquid pressures up to 1,00,000 PSI for on-site high pressure testing. It uses a reliable and low-maintenance Haskel pump and works by boosting inlet gas like nitrogen up to 350 bar using a gas booster mechanism that converts the kinetic energy of a large reciprocating air piston into pressure applied to a smaller gas piston.
Hydraulic power pack and actuator system
The document discusses the specifications for a hydraulic power supply system. It will include:
- One variable displacement pump and two fixed displacement pumps
- An electrostatic oil cleaner, cooling tower, dehydration and degasification units
- Sensors to monitor temperature at various points
- An oil reservoir, filters down to 3 microns, and other components
It provides details on operating parameters, components like pumps and heat exchangers, and guidelines for safe operation including dos and don'ts.
Anesthesia Machine and their Anatomy
updated slides from previous slides too much precise and very help full information for Bio-medical Engineers, Doctors, thanks for slides comment below email.
Anaesthesia workstation
An anesthesia workstation integrates components for anesthesia administration into one unit. It consists of an anesthesia machine, vaporizers, ventilator, breathing system, scavenging system, and monitors. Key components include the gas supply system, which receives gases from cylinders and pipelines and regulates pressures, and the vaporizer manifold and anesthetic vaporizers. Modern workstations have additional safety features to prevent delivery of hypoxic gas mixtures and other hazards.
Anesthesiamachine
The document describes the components and functions of an anesthetic machine. The primary functions are to deliver precise amounts of oxygen and anesthetic gas to patients under controlled conditions during general anesthesia. Key components include gas cylinders to supply oxygen, a flow meter to control gas flow rates, a vaporizer to mix liquid anesthetic with oxygen, and a breathing circuit to deliver gas to and remove gas from the patient.
Anaesthesia Workstation checklist and safety features
This document provides a 14-step pre-anesthesia checklist to ensure the safe functioning of all components of the anesthesia workstation. It involves checking oxygen supplies, the low and high pressure systems, scavenging and breathing systems, ventilation equipment, and monitors. A leak test of the breathing circuit is performed by pressurizing it to 30 cm H2O for 10 seconds without loss of pressure. All monitors are calibrated and have alarm limits set before final confirmation that the workstation is ready for use.
Anesthetic machine for student
The document discusses the key components of an anesthesia machine, including the high pressure system that receives gases from cylinders, the intermediate pressure system that receives gases from regulators or pipelines, and the low pressure system that extends from flow meters to the common gas outlet. It describes important safety features like fail-safe valves that prevent hypoxic mixtures if oxygen pressure drops, as well as limitations of such devices. The document also covers vaporizers, flow meters, and other parts that deliver medical gases and anesthetic agents.
The basic anaesthesia machine
This document provides information about the basic components and functioning of an anaesthesia machine. It discusses the key components of the machine's pneumatic and electrical systems. The pneumatic system includes the high pressure, intermediate pressure and low pressure systems which are responsible for delivering precisely controlled gas mixtures from pressurized cylinders or central pipelines. The electrical components power and monitor the machine. The document also provides details on cylinders, pressure regulators and other individual parts that make up the overall anaesthesia machine.
Safety features in anesthesia machine
The 2000 ASTM F1850-00 standard states that anesthesia gas supply devices must be designed so that whenever oxygen supply pressure is reduced below the manufacturer's minimum specification, the delivered oxygen concentration does not decrease below 19% at the common gas outlet. The standard also requires alarms to sound within 5 seconds if oxygen supply pressure falls below approximately 200 kPa. Safety features of anesthesia machines include oxygen/nitrous oxide proportioning systems, oxygen failure safety devices, oxygen supply failure alarms, and vaporizer interlocks.
Anesthesia Ventilator
This PPT includes,
basics of ventilator
and all the required details about Installation,servicing and maintenance of a Anaesthesia Ventilator.
Anesthesia workstation , electrical components , high pressure
The document summarizes key components and functions of an anesthesia machine. It discusses the electrical components that power devices on the machine. It describes the high pressure and intermediate pressure systems that deliver medical gases from cylinders to the patient. It also provides an overview of medical gas cylinders including components, standards, color coding and pressure relationships.
SAFETY FEATURES OF ANAESTHESIA MACHINE
The anaesthesia machine has several safety features in its pneumatic components and gas delivery systems to prevent errors and ensure patient safety. These include color coding of gas lines and controls, pin indexing systems to prevent incorrect gas cylinder attachment, pressure regulators, and linkages or proportional valves to maintain minimum oxygen concentrations. Alarms activate if oxygen pressure or flow drops below safe levels. Unidirectional valves and pressure relief devices also protect the machine from excess pressure from the patient circuit.
Intermediate & low pressure system
This document provides information on the design and components of intermediate and low pressure anaesthesia systems. It discusses the history of anaesthesia machines and describes the key parts of the high, intermediate and low pressure systems. These include oxygen cylinders, pressure regulators, pipelines, flow meters, vaporizers and the common gas outlet. Safety features like oxygen failure devices and their purpose are also explained.
Presentation on aneasthetic machine edited 21st july (2)
The most common type of anaesthetic machine in use in the developed world is the continuous flow anaesthetic machine, which is designed to provide an accurate & continuous supply of medical gases(such as O2 & NO2)mixed with an accurate concentration of anaesthetic vapour(such as halothane,isoflurane)& deliver this to the patient at a safe pressure & flow.
Modern machine incorporate a ventilator,suction unit & patient monitoring devices.
Anesthesia machine
The document summarizes the key components and functions of an anesthesia machine. It is divided into two main parts - the electrical system and pneumatic system. The pneumatic system has three pressure systems: high pressure, intermediate pressure, and low pressure. Key components described include the pressure regulating valves, flowmeters, minimum oxygen safety devices, vaporizers, and check valves. Proper placement and functioning of components is important for safety.
Machine boyles
This document discusses the components and functioning of an anaesthesia machine. It is divided into three parts: the high flow system including cylinders, pressure regulators and oxygen flush; the intermediate flow system with a second pressure reducing valve; and the low flow system comprising rotameters, vaporizers and a one-way check valve. Key safety features are also outlined such as pin index systems to prevent incorrect gas connections, oxygen and pressure monitoring alarms, and mechanisms to prevent delivery of hypoxic gas mixtures.
Anaesthesia machine 2014 spmc
This document provides information on different types of anesthesia machines and their components. It discusses intermittent gas flow machines such as the Entonox apparatus and continuous gas flow machines such as the Boyle machine. It describes the high pressure, intermediate pressure, and low pressure systems of anesthesia machines. It provides details on the components of gas cylinders including colors, sizes, and safety features like the pin index system. It also summarizes the key components of the pressure systems including hangers, regulators, filters and check valves.
Anesthesia workstation
The key points of the document are:
1) The most important part of pre-use checks on an anesthesia workstation is verifying the presence of a self-inflating resuscitation bag in case of issues with ventilation or oxygenation.
2) An ideal vaporizer would maintain a constant output concentration regardless of changes in gas flow, temperature, pressure, or carrier gas composition, but real vaporizers are affected by these factors.
3) Modern vaporizers use various techniques like temperature compensation and automatic controls to minimize fluctuations in vapor concentration due to changes in ambient conditions.
Anesthetic machine for student
The document provides an overview of the key components and systems of an anesthesia machine, including:
1) The high pressure and low pressure systems that deliver gases from cylinders or pipelines to the vaporizers and breathing circuit.
2) Safety features like fail-safe valves that monitor oxygen pressure and proportion gas flows to prevent hypoxic mixtures.
3) Components of the breathing circuit like the adjustable pressure limiting valve and circle system configuration.
4) The scavenging system that protects the circuit from excessive pressures and pollution of the operating room.
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
The Test Rig is Pneumatic Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
Bulk Solids Dispensing With EBRO Armaturen Cycle Lock
EBRO cycle-locks are installed where powdered media is discharged from silos, receiver tanks and bigbags and dosed in many cases. They are also used for feeding into downstream production processes, as well as for inertisation of products during transfer operations.
More Related Content
What's hot
Anesthesia Machine
The document summarizes the key components and functions of an anesthetic machine. It describes the high pressure and low pressure systems, including gas supplies, cylinders, manifolds, regulators and flow meters. It explains the purpose and mechanisms of vaporizers and breathing circuits. Safety features like oxygen failure alarms and leak tests are also summarized.
Test pac
Paskals TestPAC is a self-contained, compressed air-powered unit that can generate liquid pressures up to 1,00,000 PSI for on-site high pressure testing. It uses a reliable and low-maintenance Haskel pump and works by boosting inlet gas like nitrogen up to 350 bar using a gas booster mechanism that converts the kinetic energy of a large reciprocating air piston into pressure applied to a smaller gas piston.
Hydraulic power pack and actuator system
The document discusses the specifications for a hydraulic power supply system. It will include:
- One variable displacement pump and two fixed displacement pumps
- An electrostatic oil cleaner, cooling tower, dehydration and degasification units
- Sensors to monitor temperature at various points
- An oil reservoir, filters down to 3 microns, and other components
It provides details on operating parameters, components like pumps and heat exchangers, and guidelines for safe operation including dos and don'ts.
Anesthesia Machine and their Anatomy
updated slides from previous slides too much precise and very help full information for Bio-medical Engineers, Doctors, thanks for slides comment below email.
Anaesthesia workstation
An anesthesia workstation integrates components for anesthesia administration into one unit. It consists of an anesthesia machine, vaporizers, ventilator, breathing system, scavenging system, and monitors. Key components include the gas supply system, which receives gases from cylinders and pipelines and regulates pressures, and the vaporizer manifold and anesthetic vaporizers. Modern workstations have additional safety features to prevent delivery of hypoxic gas mixtures and other hazards.
Anesthesiamachine
The document describes the components and functions of an anesthetic machine. The primary functions are to deliver precise amounts of oxygen and anesthetic gas to patients under controlled conditions during general anesthesia. Key components include gas cylinders to supply oxygen, a flow meter to control gas flow rates, a vaporizer to mix liquid anesthetic with oxygen, and a breathing circuit to deliver gas to and remove gas from the patient.
Anaesthesia Workstation checklist and safety features
This document provides a 14-step pre-anesthesia checklist to ensure the safe functioning of all components of the anesthesia workstation. It involves checking oxygen supplies, the low and high pressure systems, scavenging and breathing systems, ventilation equipment, and monitors. A leak test of the breathing circuit is performed by pressurizing it to 30 cm H2O for 10 seconds without loss of pressure. All monitors are calibrated and have alarm limits set before final confirmation that the workstation is ready for use.
Anesthetic machine for student
The document discusses the key components of an anesthesia machine, including the high pressure system that receives gases from cylinders, the intermediate pressure system that receives gases from regulators or pipelines, and the low pressure system that extends from flow meters to the common gas outlet. It describes important safety features like fail-safe valves that prevent hypoxic mixtures if oxygen pressure drops, as well as limitations of such devices. The document also covers vaporizers, flow meters, and other parts that deliver medical gases and anesthetic agents.
The basic anaesthesia machine
This document provides information about the basic components and functioning of an anaesthesia machine. It discusses the key components of the machine's pneumatic and electrical systems. The pneumatic system includes the high pressure, intermediate pressure and low pressure systems which are responsible for delivering precisely controlled gas mixtures from pressurized cylinders or central pipelines. The electrical components power and monitor the machine. The document also provides details on cylinders, pressure regulators and other individual parts that make up the overall anaesthesia machine.
Safety features in anesthesia machine
The 2000 ASTM F1850-00 standard states that anesthesia gas supply devices must be designed so that whenever oxygen supply pressure is reduced below the manufacturer's minimum specification, the delivered oxygen concentration does not decrease below 19% at the common gas outlet. The standard also requires alarms to sound within 5 seconds if oxygen supply pressure falls below approximately 200 kPa. Safety features of anesthesia machines include oxygen/nitrous oxide proportioning systems, oxygen failure safety devices, oxygen supply failure alarms, and vaporizer interlocks.
Anesthesia Ventilator
This PPT includes,
basics of ventilator
and all the required details about Installation,servicing and maintenance of a Anaesthesia Ventilator.
Anesthesia workstation , electrical components , high pressure
The document summarizes key components and functions of an anesthesia machine. It discusses the electrical components that power devices on the machine. It describes the high pressure and intermediate pressure systems that deliver medical gases from cylinders to the patient. It also provides an overview of medical gas cylinders including components, standards, color coding and pressure relationships.
SAFETY FEATURES OF ANAESTHESIA MACHINE
The anaesthesia machine has several safety features in its pneumatic components and gas delivery systems to prevent errors and ensure patient safety. These include color coding of gas lines and controls, pin indexing systems to prevent incorrect gas cylinder attachment, pressure regulators, and linkages or proportional valves to maintain minimum oxygen concentrations. Alarms activate if oxygen pressure or flow drops below safe levels. Unidirectional valves and pressure relief devices also protect the machine from excess pressure from the patient circuit.
Intermediate & low pressure system
This document provides information on the design and components of intermediate and low pressure anaesthesia systems. It discusses the history of anaesthesia machines and describes the key parts of the high, intermediate and low pressure systems. These include oxygen cylinders, pressure regulators, pipelines, flow meters, vaporizers and the common gas outlet. Safety features like oxygen failure devices and their purpose are also explained.
Presentation on aneasthetic machine edited 21st july (2)
The most common type of anaesthetic machine in use in the developed world is the continuous flow anaesthetic machine, which is designed to provide an accurate & continuous supply of medical gases(such as O2 & NO2)mixed with an accurate concentration of anaesthetic vapour(such as halothane,isoflurane)& deliver this to the patient at a safe pressure & flow.
Modern machine incorporate a ventilator,suction unit & patient monitoring devices.
Anesthesia machine
The document summarizes the key components and functions of an anesthesia machine. It is divided into two main parts - the electrical system and pneumatic system. The pneumatic system has three pressure systems: high pressure, intermediate pressure, and low pressure. Key components described include the pressure regulating valves, flowmeters, minimum oxygen safety devices, vaporizers, and check valves. Proper placement and functioning of components is important for safety.
Machine boyles
This document discusses the components and functioning of an anaesthesia machine. It is divided into three parts: the high flow system including cylinders, pressure regulators and oxygen flush; the intermediate flow system with a second pressure reducing valve; and the low flow system comprising rotameters, vaporizers and a one-way check valve. Key safety features are also outlined such as pin index systems to prevent incorrect gas connections, oxygen and pressure monitoring alarms, and mechanisms to prevent delivery of hypoxic gas mixtures.
Anaesthesia machine 2014 spmc
This document provides information on different types of anesthesia machines and their components. It discusses intermittent gas flow machines such as the Entonox apparatus and continuous gas flow machines such as the Boyle machine. It describes the high pressure, intermediate pressure, and low pressure systems of anesthesia machines. It provides details on the components of gas cylinders including colors, sizes, and safety features like the pin index system. It also summarizes the key components of the pressure systems including hangers, regulators, filters and check valves.
Anesthesia workstation
The key points of the document are:
1) The most important part of pre-use checks on an anesthesia workstation is verifying the presence of a self-inflating resuscitation bag in case of issues with ventilation or oxygenation.
2) An ideal vaporizer would maintain a constant output concentration regardless of changes in gas flow, temperature, pressure, or carrier gas composition, but real vaporizers are affected by these factors.
3) Modern vaporizers use various techniques like temperature compensation and automatic controls to minimize fluctuations in vapor concentration due to changes in ambient conditions.
Anesthetic machine for student
The document provides an overview of the key components and systems of an anesthesia machine, including:
1) The high pressure and low pressure systems that deliver gases from cylinders or pipelines to the vaporizers and breathing circuit.
2) Safety features like fail-safe valves that monitor oxygen pressure and proportion gas flows to prevent hypoxic mixtures.
3) Components of the breathing circuit like the adjustable pressure limiting valve and circle system configuration.
4) The scavenging system that protects the circuit from excessive pressures and pollution of the operating room.
What's hot (20)
Anaesthesia Workstation checklist and safety features
Anaesthesia Workstation checklist and safety features
Anesthesia workstation , electrical components , high pressure
Anesthesia workstation , electrical components , high pressure
Presentation on aneasthetic machine edited 21st july (2)
Presentation on aneasthetic machine edited 21st july (2)
Similar to Hose test bench ppt
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
The Test Rig is Pneumatic Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
Bulk Solids Dispensing With EBRO Armaturen Cycle Lock
EBRO cycle-locks are installed where powdered media is discharged from silos, receiver tanks and bigbags and dosed in many cases. They are also used for feeding into downstream production processes, as well as for inertisation of products during transfer operations.
N2 and co2 filling system
The test rig is a pneumatic system designed for safety, user-friendliness, and to meet all requirements in the design document. An operator can independently complete any specified tests using the test rig. Haskel pumps are used due to their long life and low maintenance. The test rig allows for static pressure testing up to 3400 PSI and includes pressure transmitters, gauges, filters, and proportional pressure regulators for controlled filling. Pumps can supply CO2 at 3400 PSI and N2 at 4500 PSI, while the front panel HMI and emergency stop button allow auto and safe manual control of the system.
Anesthesia Machine.pptx
The document provides instructions for checking an anesthesia machine. It outlines 14 steps to check the emergency ventilation equipment, oxygen and gas supplies, low pressure and scavenging systems, breathing circuit, ventilation systems and monitors. Key checks include verifying backup ventilation, oxygen cylinder levels, gas pipeline pressures, checking for leaks in the low pressure and breathing systems, calibrating monitors, and ensuring the final status of the machine is safe. The checkout is recommended before each use to ensure the anesthesia machine is functioning properly and can deliver a safe gas mixture to patients.
hydraulic-pressure-testing-rig.pptx
The Test Rig is Electro Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
Neometrix is very focused on systems & services which can be of immense use to you. We specialize in Hydraulic/ Servo Hydraulic Test Systems, Fuel System Test Rigs, Pneumatic System Test Rigs, Oxygen/ Special Gases system Test Rigs, Very High Pressure Systems, Electronic & Electrical Test Rigs.
Pressure Indicator.
Fluid Level Indicators
Emergency stop switch
Filtration System.
Pressure regulator valve
Cooling line pressure Indicator(0-25 bar)
N2 and co2 filling system
The test rig is a pneumatic system designed for safety, user-friendliness, and to meet all requirements in the design document. It allows an operator to independently perform all required tests. A Haskel pump is used which is reliable and requires little maintenance. The test rig is equipped to perform static pressure testing up to 3625 psi and includes pressure transmitters, filters, and proportional pressure regulators for controlled filling. CO2 and N2 Haskel pumps can produce pressures up to 4500 PSI and the system can be controlled in auto mode or stopped with an emergency button.
Cng high pressure regulator testing bench ppt
This document describes a unit for testing the continuous operation of CNG regulators by conducting 50,000 pressurizing and depressurizing cycles at different test pressures and temperatures according to ISO 15500-9:2001(E) standards. The unit features user-friendly software for scheduling tests, PLC logic control, a high-pressure reservoir up to 300 bar, safety interlocks, mobility, ergonomic controls, and the ability to test multiple points for OEMs. It can test inlet air pressures from 10-260 bar at room temperature.
Cng high pressure regulator testing bench ppt
This document describes a unit for testing the continuous operation of CNG regulators by conducting 50,000 pressurizing and depressurizing cycles at different test pressures and temperatures according to ISO 15500-9:2001(E) standards. The unit features user-friendly software for scheduling tests, PLC logic control, a high-pressure reservoir up to 300 bar, safety interlocks, mobility, ergonomic panels, and the ability to test multiple points, making it useful for original equipment manufacturers.
The evolution of pediatric mechanical ventilators
1. Mechanical ventilators have evolved from simple analog machines to sophisticated microprocessor-controlled devices with advanced modes of ventilation.
2. Early ventilators were open-loop controlled while modern ventilators use various closed-loop and dual-loop control schemes to better match ventilation to patient needs.
3. The newest generations of ventilators use proportional assist, automatic tube compensation, adaptive support ventilation, and other advanced modes that aim to provide more patient-synchronized support and facilitate weaning. However, further research is still needed to fully understand the outcomes of these newer ventilation strategies.
The evolution of pediatric mechanical ventilators
1. Mechanical ventilators have evolved from simple analog machines to sophisticated microprocessor-controlled devices with advanced modes of ventilation.
2. Early ventilators were open-loop controlled while modern ventilators use various closed-loop and dual-loop control schemes to better match ventilation to patient needs.
3. The newest generations of ventilators use proportional assist, automatic tube compensation, adaptive support ventilation, and other advanced modes that aim to provide more patient-synchronized support and facilitate weaning. However, further research is still needed to fully understand the outcomes of these newer ventilation strategies.
Leak Tests.pptx
The document discusses how to test the low-pressure circuit of an anesthesia machine. It describes how leaks can occur and methods to test for leaks, including positive and negative pressure leak tests. It emphasizes that machines with check valves must use a negative pressure test. Several components are tested, including the vaporizers, flow tubes, and check valves. Proper testing of the low-pressure circuit is important to ensure no leaks that could cause hypoxia or patient awareness.
WHSEQ Alert 53 worker fatality after being hit in the face by head jets was...
An operator was cleaning a 100mm diameter wastewater pipe located 4m underground between a lift station and manhole. He inserted a high pressure hose head into the manhole to unclog the pipe. However, the pipe had not been previously pumped out. As a result, when the operator activated the high pressure, the head exited the manhole and struck the operator in the face, killing him. To prevent such accidents, organizations should ensure workers are trained, have the proper equipment, and identify pipe directions before unclogging operations. High pressure equipment should only be activated when the head is confirmed to be in the pipe.
PIPELINE.pptx
- Terminal units provide connection points for gas delivery from the pipeline system to anesthesia machines and other medical devices. They contain primary and secondary valves to prevent backflow and shut off gas delivery.
- Gas specific connectors like DISS fittings and quick connectors provide non-interchangeable connections between terminal units and equipment outlets to prevent mixing of different gases.
- Alarms monitor the central gas supply and distribution systems for issues like pressure changes, which are indicated on master and local alarm panels. The pipeline network branches from main lines and risers to deliver gases at standardized pressures.
KU-7 Leak Tester
KU – Oxygen Tester is a device that tests the UUT. The rig consists of a
Chamber to keep the Unit for Testing, Pressure Regulators to control the
pressure and read on the pressure gauges. The rig is working on both High
Operating Pressure (4000psi) and Low Operating Pressure (50psi). The
working medium for the operation is Nitrogen gas. The Rig is portable as it
has a wheeled Base and compact. The whole rig looks like a Trolley. As the
rig has a wheeled base so it can be moved from one place to another with
less effort.
Hydraulic Pressure Testing Rig
HYDRAULIC PRESSURE TEST RIG-The Test Rig is Electro Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
HYDRAULIC PRESSURE TEST RIG PICTURES
The test rig is an electro-hydraulic system designed to safely test pipe assemblies with pressures up to 10,000 PSI. It has digital gauges, timers, and relief valves to control the testing process. The rig also includes pumps, cooling, lighting, couplings, and indicators to allow independent operation and complete specified tests.
High integrity pressure protection system ( HIPPS)
A high integrity pressure protection system is designed to prevent over-pressurization of a plant, such as a chemical plant or oil refinery
Relief and safety valves for thermal power plants
Pressure relieving valves like safety valves and safety relief valves are used in thermal power plants to prevent overpressure in pressurized systems. There are different types including safety valves, safety relief valves, and power operated relief valves. Safety valves open fully at a set pressure while safety relief valves can open proportionally. Standards like ASME Section I provide requirements for safety valve installation, capacity, materials, and settings to ensure systems are properly protected from overpressure. Safety valves are part of defense-in-depth protection schemes used in power plants to prevent accidents.
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
Labtronixed Inc is leading of horizontal Rectangular autoclaves. Sterilization is a process of killing microorganisms with the help of a steam sterilizer at 121°C to 134°C & a steam pressure of 15 to 30 PSI as require. These horizontal autoclaves are front loading in design, we designed in cylindrical or rectangular shapes small and big size with both is size.
anesthesia machine.pptx
The document discusses the components and functions of an anesthesia machine. An anesthesia machine provides medical gases like oxygen and nitrous oxide mixed with anesthetic vapors to patients. It has several key components including pressure regulators, vaporizers, reservoirs, carbon dioxide absorbers, adjustable pressure limiting valves, ventilators, and scavenging systems. The machine precisely delivers gas mixtures to maintain anesthesia and ventilation. It is designed with three pressure systems - high, intermediate, and low - to safely regulate gas delivery.
Similar to Hose test bench ppt (20)
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
Bulk Solids Dispensing With EBRO Armaturen Cycle Lock
Bulk Solids Dispensing With EBRO Armaturen Cycle Lock
WHSEQ Alert 53 worker fatality after being hit in the face by head jets was...
WHSEQ Alert 53 worker fatality after being hit in the face by head jets was...
High integrity pressure protection system ( HIPPS)
High integrity pressure protection system ( HIPPS)
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
More from Neometrix_Engineering_Pvt_Ltd
Standard Reomte Control Interface - Neometrix
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Integrated Test Rig For HTFE-25 - Neometrix
The purpose of Integrated Test Rig is to assess performance of Fuel Cooled Oil Cooler (FCOC), HP Pump & Oil Pump prior to fitment on Aero Engine. The design of rig is such that it can cater to individual testing of individual LRU or integrated testing of all the LRU’s installed together (in combination). The pumps under test shall be mounted directly on the high-speed electric motor flange through adapter quill shaft assembly. Variable speed drives shall be provided for all the pumps under testing. The rig shall cater for real time monitoring and recording of performance parameters.
KEY FEATURES
Key features of this Rig are as follows: -
1. It has separate power packs for both the fluids i.e. ATF Power pack for ATF Fluid, OX Power Pack for OX-27 Oil.
2. This Rig is designed for high temperature Application. It works on 200 deg. Celsius.
3. Two Dedicated heating systems have been integrated with this Rig to raise the temperature of OX-27 Oil.
4. In both Power Packs insulated tanks are being used, which is good for safe operation and safety of operator.
5. This rig is designed in such a way, that it’s OX power pack is in its left side, ATF Power pack is in right Side and test bed is in Centre.
6. A big Test bed have been provided for smooth testing of UUT’s.
7. All piping is being insulated for safe operation and maintenance.
8. It comprises with DAQ System.
9. This rig can test several components at a time, together or separately.
Application
All the UUT’s are mounted on HTFE-25 Engine after successful performance testing of those. Application of this Rig are as follows: -
1. One of its application is to test LP Pump of HTFE-25. It is designed for functional testing of LP Pump.
a. Free Flow Test
b. Load Test
2. It is used to test HP Pump of HTFE-25. It is designed for functional testing of HP Pump.
a. Free Flow Test
b. Load Test
3. It is used to test Oil Pump of HTFE-25. It is designed for functional testing of Oil Pump.
4. It is used to test FCOC of HTFE-25.
Neometrix Optical Balloon Theodolite.pptx
Neometrix Optical Balloon Theodolite
• In common with other land based balloon theodolites the Neometrix theodolite OT-NEA3060 has a telescope with a bent optical axis. A secondary wide-angle telescope using the same eyepiece is selectable with a mirror. There are two pins on the tip of this instrument that serve as contacts to an attachable battery case. The Photo shows the theodolite with the battery case attached.
• In the photo above you can see the bubble level directly under the two switches. The switches control illumination of the reticule and the circles.
• You can see the accessories for this instrument, filters for the eye piece, the key to the case, lens shade, lens cap and a plumb bob. Also note the hook for hanging a stopwatch and the magnifying glass to assist reading the circles.
• Distinguishing features of the OT-NE-A3060 theodolite are the use of a Pentagonal Prism in the bent axis telescope, which allows for better stability of the optical alignment, a closed circle design for durability, two levels of magnification offering wide and narrow fields of view (accomplished with a switchable finder scope using the same eyepiece with two objectives) and a lined gradicule supporting the tail method of altitude determination. The placement of the azimuth and elevation circles directly above each other as well as the use of Micrometer drums facilitates rapid determination of Azimuth and elevation directly to the 10th of a degree.
Dynamometer Engine Test Rig for engines parameters RPM
An Eddy current dynamometer is an electromechanical energy conversion device, which converts mechanical energy to electrical energy. It fundamentally uses Faraday’s Law of electromagnetic induction as its working principle.
In this system we test different ranges of engines RPM, Torque in N-m, and Power. And parameters will be shown in panel.
Power- up to 200 KW
Torque- 1780 N-m
Engine for testing with a range of 1500- 2000 rated rpm.
Engine monitoring system: Control panel with digital meters, oil pressure, lube oil temperature, water temperature, Engine RPM.
Engine parameter recording: A computer based data logger to record engine control parameters. A printer to be provided for printout report of all engines parameter.
And parallel we can record engines parameter like Lube oil pressure, Engine temperature, water temperature etc.
Mechanical Dimensions:-
• Overall Size: 2000 mm x 850mm x 1350 mm
• Centre Height: 900 mm
• Inlet Piping: 2”
• Outlet Piping: 2”
• Calibration Arm Length from centre: 1000 mm
• Cooling Water Requirement (Dynamometer Inlet) Pressure: 1.0-2.0 bars
• Temperature: Less than 40°C.
• Cooling Water Flow (Dynamometer Inlet): 12500 LPH
• Type of Lubrication: Grease (Inner earing), Oil (Outer Bearing)
Electrical:
• Supply Voltage:240 volts ± 10% AC, 50 Hz
• Separate Earth should be given to the system.
• Maximum Excitation: Internally set in the instrument depending on the capacity of Eddy current dynamometer. Generally, 3 To 5 Amps D.C.
• RPM: This is displayed by a 4 digit display. This displays Motor/dynamometer rpm.
• Accuracy: ± 1 rpm.
Environmental:
i) Temperature: 5 to 550C maximum
ii) Humidity: R.H. 95% maximum
Application:
Dynamometer system will test the engines parameters RPM, Torque, Power, Lube oil pressure, temperature, water temperature and result will be shown in control panel with digital meters.
Portable Digital Barometer for Indian Air force
Portable Barometer uses a silicon resonant pressure sensor DPS 8100 producing a pressure reading in pressure measurement units and pressure altitude. It also has a Comptek 10.1" tablet, mounted on an Aluminum enclosure. It can be used as a hand-held indicator tablet or instrument. The instrument can also communicate through a USB connector to extract out logged data. This USB port should be strictly used for App-related data transfer only. The instrument has an in-built tablet which should be used only for the TERPS App. The tablet is provided with a compatible charging adapter. This should be used only to charge the instrument. The instrument should be used within the operating and maximum safe working pressure conditions. Refer to the specification section in this manual for the details.
Sensor Port:
Keep the sensor port clean all the time. Protect the sensor against moisture, water, dirt and dust particles.
Do not block the sensor with any object as it may result in inaccurate reading output.
For better and accurate readings, keep the sensor port away from continuous pressure changing areas (for example, should not be close to AC, Fans, table fans etc.).
During pressure measurement, the device should be placed on the table or held in the orientation.
In case of hand-held application, hold the instrument as shown in Figure 3. While holding the unit, ensure that the hand does not block the sensor port.
USB Port:
This USB Port is specifically for extracting the exported data from the TERPS App. Do not use this port for any other activity. Use this port only for App-related data transfer. When not in use, close the USB port using the rubber cap.
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
PROJECT: TEST RIG FOR HYDRAULIC FLUID (A3987)
The test rig is used to test the anti-wear properties and the aging
behaviour of hydraulic fluids under defined and reproducible
conditions. For this purpose, a vane pump Vickers 35VQ25A-11*20
for ASTM D6973-2014 and a Bent Axis type axial piston pump
A2F10 for JCMAS P 045 are used as test objects. The subsequent
investigation of the wear inserts and oil condition then allows
conclusions about the performance of the tested fluids, especially
their ability to avoid wear and resist oxidation. The modern and
ergonomically designed test rig meets all the specifications of the
European Machinery Directive 2006/42/EG to a high standard or
equivalent Indian Standard. The test rig is used to determine the
wear characteristics and oxidation/ aging of non-petroleum and
petroleum hydraulic fluids. For this purpose, a rotary vane pump
generates a test pressure under specific boundary conditions. The
result obtained is the total mass loss from the cam ring and the ten
vanes (ASTM D6973-2014) after the test. For indicating oxidation
stability or aging behaviour of hydraulic fluids this test bench, uses a
bent axis pump A2FO10 and a pressure relief valve DBDS 10
K1X/400V as load at high temperatures. The test takes place under
the influence of air and a copper catalyst. This procedure allows for
an accelerated aging rate using a real hydraulic component. The test
rig parameters meet the specifications according to ASTM D6973-
2014 and JCMAS P 045. Additionally, it is capable of carrying out the
evaluation of hydraulic fluid for frictional characteristics and energy
efficiency performance under indigenously developed and
industrially simulated test methods by varying load, speed,
temperature, pressure, flow rate etc.
Hydraulic Loading System - Neometrix Defence
Hydraulic Loading System Serves the following purpose during engine run::
Loads the Engine mounted Hydraulic Pump by Varying the Outlet restriction to achieve specific Flow Rates at specified Pressure Range.
Carry out Cyclic Load Testing of the Hydraulic Pump.
There are six different module which after assembly become complete system.
Modules are following:
Oil tank module
Air Regulation module
Inlet module
Outlet module
Drain module
Loading valve module
Heat exchanger module
Portable oil filling module
KEY FEATURES
Design Pressure : 340 kg/cm2
Working Pressure : 270-295 kh/cm2
Working Flow : 20-210 LPM
Hydraulic Oil : MIL=H-5606/FH-51
Viscosity : 15CST @ 40°C
Density : 0.8735 AT 15.6°C
Tank Capacity : 175 Liters
Tank Max. Pressure : 10 kg/cm2
Max. Temp. at Pump Outlet : 100°C
Max. Temp. at Pump Intel : 80°C
Test Rig for 130LPM Pump of LCA- Neometrix
The Test Rig is self-contained, Electro Hydraulic Test Rig. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump. The brief spec and tests of this pump is given below as:
The brief specs of the pump-
Rated Pressure = 270 bars
Rated Flow = 130 LPM at 270 bar
Rated Speed = 6000 RPM
Application
The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump.
Key features
Drive System with Gear Box Lube Oil System
High Pressure System for Pressure Proof Testing
Low Pressure System for Functional Test
Control and Indicator Panel
Data Acquisition System.
The test rig is design to work up to 120°C.
Two moog make servo valves have been provided in Rig for Cyclic Test.
Cooling System: We are using water as the medium for the cooling purpose, with the help of Heat Exchanger. Total three heat exchanger has been provided in system.
Filtration: Proper filtration has been provided and the filters have electronic clogging indicators.
The rig is developed for Hydraulic Oil (MIL-H- 5606E) or equivalent.
Three SS 304 Reservoirs of oil capacity 90, 225 and 50 liters have been provided with all related fittings.
Safety Interlocks
The Pump will not start in case the Reservoir oil level is low/ high.
The Pump will stop/ will not start, in case the oil temperature goes beyond a set limit.
There would be alarm and indication, in case any abnormality happens.
In case any of the filters are clogged, there would be alarm; Indication and the Test rig will stop.
It is also independent of the Computer automation system.
Computer: The Rig Diagnostics/ Monitoring & Recording are implemented Through the National Instruments data acquisition System and PC. The customized Software is implemented in Lab View.
Lock Loading Test Rig (ERU119 & ERU120) .pptx
This rig is designed for testing Ejection Release Units (ERU119 & ERU120) which are tested for Hook Proving Loads. These units are tested for load deformation and the test results will automatically come out as OK/NG on the basis of pre-fed Deformation & Load settings in the system. A self-contained Test Bench is provided to test both types of units.
Mechanical System:
Independent Bench for ERU119 & ERU120 is provided.
Horizontal Loading Facility for the units is provided.
Custom made fixture for holding the units, and unit profile will be accommodated in the fixture so that the unit is not damaged during testing.
LVDT with magnetic contact is provided for displacement measurement.
Both systems have Load Cells with in-situ calibration facility. In- situ calibration will be done automatically.
starter-generator-test-bench-Catalog.pptx
The Following Test Bench is for Testing Parameters of Starter Generator of
Advanced Light Helicopter (ALH).
The Test bench has following four tests :-
1) Generator Mode Load and no Load Test.
2) Starter Mode Load Test.
3) Vibration Measurement Test.
4) Concentricity And Bar to Bar Difference Measurement Test.
Test Bench Description:
This test will have a Combination of AC Motor of 5000 RPM rigidly Coupled with the Dual Output Gear Box having Ratio of 1:3 to give maximum speed of 15000 RPM at output . The output is to accommodate the shaft of 6KW Starter Generator With Suitable Clamping On the Common Flange.
Resistive Load Bank with good Cooling Facility provides load to the Starter Generator in steps of 0,50,100,150 and 200 Amp with additional loads of 300A , 375A and 450 Amp .Load is selected from the control panel through selectable switches.
A.C. Drive ABB make is also provided for this Test with Control signals
From control panel.
45 KVA Ground Power Unit for Raphael .pptx
Ground Power Unit(GPU) is used to give the power to the aircraft which is in the ground during the maintenance and repair work the GPU is used to power up the system externally, This GPU is having Dual output one is 45Kva AC power that consist of L-L 200V and L-N 115V ,150A and 400HZ four wire system another one will be DC 28.5 V 800A two wire system and it will deliver the two output simultaneously up to maximum range of 45 KVA, the following components are used to design the GPU.
Overview: A diesel engine/electric motor coupled with highly reliable alternator provides a perfect output to your aircrafts. With a touchscreen control panel and interactive GUI, this GPU is easy to operate and effortless to maintain. Our AC Ground Power Unit can be supplied with additional 28.5V DC module for obtaining commercial power voltage for tools, appliances. etc. during aircraft maintenance. it is a feature-rich software built for remote operations of GSE with parameter details, fault alarms, alerts and periodic maintenance schedule.
Application
GPU is used to support the aircrafts in ground to maintain and trouble shoot its basic testing with out start up their engine, This will be designed on the required power of aircraft and this whole system is operated by diesel engine , The system is mounted on the portable moving trolley to provide the easy accessibility all over the ground which is towable with necessary braking system.
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications.
Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance.
Specifications
Neometrix Thermal Tester is Temperature Forcing Systems and environmental test chambers provide quality assurance through temperature cycling testing. We have used standard highly reliable FLIR camera for thermal scanning.
Thermal Tester is a mobile thermal testing solution capable of environmental stress testing throughout the semiconductor design, manufacturing, and back-end test processes.
Application
Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications.
Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance.
Key features
Thermal Tester is having following major features:
(a) Wide angle (min 50 degree horizontal) Infrared imaging camera with 640X480 pixels resolution or better.
(b) Thermal analysis software for hotspot and other faults detection.
(c) Automated enclosure with PCB test fixture for testing of PCB of dimension 16X16 inch or better.
(d) Power supply module with minimum eight relay to provide 230VAC/3A/50Hz and 28VDC/5A or better.
(e) Temperatures measurement range: -20 to 200 degrees Celsius.
Optical-test-bench-for-pcb-and-optic-testing.pptx
Optical test equipment or optical measurement equipment are used to measure and characterize the physical properties of light. The insatiable demand for higher capacity in communication networks has fueled the need for highly precise optical test solutions. In addition, precision optical measurements are essential to optical research applications for Defence communication, mobile communication, environmental sensing, and consumer products.
R&D engineers, academic researchers, manufacturing engineers, and field service personnel depend on precision optical test equipment to ensure design and performance specifications, production quality, and network health. For more than 10 years, Neometrix has delivered quality, consistency, ease of use, and market leadership for optical test applications.
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
Mobile Test Facility (MTF) - Neometrix Defenece
The proposed Mobile Test Facility (MTF) is a roadworthy self-sufficient test facility for testing of “Expandable Turbo Propulsion system (Expandable Engines) of up to 450kgf class” and is devised for Field Tests at various altitude sites in India ranging from sea level to High Altitudes.
“MTF” is proposed with modular design concept, where in each module is built and rigidly installed on a trailer with pre-designated system based on each modules infrastructure functionally required.
It consists Four Trailer mounted Modules-
1. Mobile Utility Trailer Module
2. Mobile Control Cabin Trailer Module
3. Engine Test Section Unit Trailer Module
4. High Pressure Mobile Compressor unit Module (Under GTRE Scope)
Operational Environment :-
1. Test Site Altitude: - From10 m above MSL to 4522 m above MSL
2. Test Site Temperature: -20°C to +50°C
3. Test Site Atmospheric Pressure: 0.57 Atm to 1 Atm
4. Test Site Humidity: 20% to 80%
Electrical General Requirements:
a. Voltage: 415 v ±10%, 3 phase.
b. Frequency: 50 hz +3%, -6%.
c. Aux voltage: 110 VAC (normal supply).
d. UPS voltage - 230 VAC for PLC Panel.
e. 24 V DC Control Circuits.
f. Main switch with emergency stop function.
g. Illuminated double push-button for ON/OFF.
h. Blue illuminated push-button for fault indication and acknowledgement.
i. Control of the test rig and the test programs via operating computer.
modern-universal-automatic-test-equipment.pptx
MODERN UNIVERSAL AUTOMATIC TEST EQUIPMENT(MUATE) is an equipment which is used to perform automatic measurements on the device, known as unit under test (UUT), device under test (DUT), and evaluate the test results. An MUATE has a computer controlled system that contains many complex test instruments that are capable of automatically testing and diagnosing faults in intricate electronic components, PCBs, Integrated circuits. It can test a large range of electronic devices and systems from ingenious components like resistors, inductors, capacitors to complex compiled electronic systems. To accomplish this intention, we are harnessing JIG/Fixture/ITAs.
MUATE systems designed to decrease the amount of test time needed to verify a particular PCB, Component, LRU.
MUATE contains Five subsystem
(a) JTAG
(b) Bed of Nails
(c) Boundary scan
(d) Data acquisition system
(e) Controller
JTAG helps users with PCB debugging, prototyping, testing and repairing.
By using the Bed of Nails (ICT-In circuit testing) we can check for short, open, resistance, capacitance, inductance, tracks, and many more
Components, with the help of boundary scan Test device pin signals or internal signals can be monitored in real-time without interfering with normal operation.
drive-and-control-automation-system.pptx
A drive and control automation system is designed for Helicopter Main Gear Box (MGB) load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware & software required for the drive and control automation system for the test rig.
The test rig is a mechanical closed loop system in which the rated speed of MGB is achieved by motor through lower adaptor gearbox. In order to achieve various loads such as thrust loads, torque load and hydraulic pump loads the hydraulic power packs with actuators will be employed. The hydraulic power packs consist of motor pumps, various process switches, sensors valve, etc. which facilitate remote operation of DAS (Data Acquisition System) of the test rig. An AC alternator which is mounted on MGB is to be loaded through resistive load bank with contactor panel.
HYDRAULIC REFILLING TROLLEY - NEOMETRIX DEFENCE
The HYDRAULIC REFILLING TROLLEY is specially designed and developed for the GROUND REFILLING of oil in aircraft systems. It is used for refilling oil in aircraft system through the supplied pressurized hydraulic oil from the trolley to the aircraft, comprising of a pressurized reservoir, with filtered and de- aerated fluid at flow and pressure characteristics required for testing. The Trolley is suitable for wide range of fighter aircraft, military transport aircraft, and helicopters used in Indian Air Force.
This Hydraulic refilling trolley is basically designed for charging Engine oil (Turbonyc Oil-210,Viscosity- 3.7 cst at 100 Deg Celcius )to AIRCRAFT.
Compressed nitrogen is fed from air bottle (BL) along the flexible hose ,through shutoff valve reducers for building up pressure inside the tanks.
The safety valve releases compressed nitrogen into the atmosphere in case pressure exceeds set value.The working fluid displaced by nitrogen pressure from the tank passes through filters and used for cleaning the fluid of mechanical admixtures and gets through aircraft charging adaptor to the AIRCRAFT.
universal-hydraulic-test-bench-aircrafts .pptx
The Neometrix Engineering Series NE-A0107 Universal Hydraulic Test Stands are designed for testing all kind of hydraulic components in various aircrafts & helicopters of Western/ Russian origin like SU-30, Jaguar, Mirage etc.
This is a WORK HORSE required in every ground support & testing establishment.
Virtually any hydraulic component can be tested on this Test Stand by making right hydraulic & electrical connections. It is also very popular with aviation R&D and Product development establishments.
NE-A0107 is heavily used for testing & validating the actuators, valves, accumulators, pumps, hydraulic motors and the hydraulic power packs. Integral drive and integral dynamometer are provided for testing pumps and motors. The NE-A0107 Series Test
Stands are available configured for use with MIL-H-5606, MIL-H-83282, MIL-H-87257 and MIL-H-46170 Hydraulic fluids. Customized OPTIONS are also available.
Key Features:
Cost-effective (International quality, INDIAN PRICE), accurate, automated, software driven, highly capable test system.
Fully Computerized Test Stand. Manual & Semi-Automatic options also available.
National Instruments PXI Based DAQ with Lab View based software
Operating Pressure: up to 3,000 PSI. Flow: up to 20 GPM. Static Pressure: up to 10,000 PSI.
Pumps drive: 5000 RPM, 200 HP. Dynamometer: 5000 RPM, 200 HP. Electrical DC supplies for power packs: 0-32 VDC, 1000 AMP.
Temperature control of hydraulic test circuits. Chilled Water & Air cooled options available.
Six Clamp Perfect Binding Machine
Machine's Salient Features :This is Multi Clamp Perfect Binding Machine, where 6 book clamps travelling in an oval shaped path and done a binding work in a perfect way. 1. In this spine is in line with the crucial binding systems.2. Milling Cutter Comes With Strip Type Cutter and Separate Waste Exhaust System. 3. Gluing System Which has 2 forward rollers and 1 reverse roller (In-built Heating) gives high Quality binding.4. Calibrated head and tail cut offs to avoid adhesive squeeze out.5. Online creasing attachment with Auto Cover feed makes more sense in production.6. Our machine has Optional feeder tray for manual feeding of gate folded covers.7. 'No book-No cover' system ensures the continuous flow of clamps.8. Height and Pressure adjustable ram for book blocks. 9. Moving type Cam Nipping system ensures perfect nipping cover registration.10. Chute delivery system with built in safety systems.
More from Neometrix_Engineering_Pvt_Ltd (20)
Dynamometer Engine Test Rig for engines parameters RPM
Dynamometer Engine Test Rig for engines parameters RPM
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Recently uploaded
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Recently uploaded (20)
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Hose test bench ppt
- 3. Test chamber with transparent lid to view hoses under pressure. Inlet and outlet multiple manifolds, housed in the test chamber, for connecting the hoses under test with intrinsic safety. Facility to test up to three or four hoses, at a time. Ergonomic Operational Panel to facilitate safe operations by single operator.
- 4. Ergonomic Operational Panel to facilitate safe operations by single operator Facility to test up to three or four hoses, at a time. Inbuilt safety relief valve to prevent accidental over pressure and hence intrinsic personnel safety. HMI(HUMAN MACHINE INTERFACE ) is there to operate everything in AUTO MODE Haskel pump is used which is known for its long life and low maintenance
- 5. Pre fill: To facilitate quick and efficient operations, the system has an integral high flow pneumatic or electric pump (220 V AC 1 Ph. 50 Hz) to do the prefill on the test hoses once they are connected inside the test chamber. The gravity feed to the pump can be from a domestic 1. OD water tap. Discharge pressure into the hoses at 150 . 200 psi. Pressure Test: The pressurization of the hoses is done quickly by air driven Haskel Pump. Control Panel: The Main Control Panel will have an air as well as electric circuitry with appropriate stop start switches and valves. Safety Relief Valve: There would be a manually adjustable but automatic venting safety relief valve to prevent accidental over pressure. Pressure Gauges: Large dial pressure gauges to indicate test pressure with adequate.
- 6. THANK YOU