KU-7 Leak Tester
•Download as PPTX, PDF•
0 likes•22 views
KU – Oxygen Tester is a device that tests the UUT. The rig consists of a Chamber to keep the Unit for Testing, Pressure Regulators to control the pressure and read on the pressure gauges. The rig is working on both High Operating Pressure (4000psi) and Low Operating Pressure (50psi). The working medium for the operation is Nitrogen gas. The Rig is portable as it has a wheeled Base and compact. The whole rig looks like a Trolley. As the rig has a wheeled base so it can be moved from one place to another with less effort.
Report
Share
Report
Share
Recommended
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
The Test Rig is Pneumatic Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
hydraulic-pressure-testing-rig.pptx
The Test Rig is Electro Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
Neometrix is very focused on systems & services which can be of immense use to you. We specialize in Hydraulic/ Servo Hydraulic Test Systems, Fuel System Test Rigs, Pneumatic System Test Rigs, Oxygen/ Special Gases system Test Rigs, Very High Pressure Systems, Electronic & Electrical Test Rigs.
Pressure Indicator.
Fluid Level Indicators
Emergency stop switch
Filtration System.
Pressure regulator valve
Cooling line pressure Indicator(0-25 bar)
Target flowmeter catalog.zero100tf
The document provides information on the Target Flow meter, including:
1) It describes the structure and principle of operation, which uses pressure sensors to measure the pressure force on a target from the flow of liquid or gas through the measurement tube.
2) It lists the main technical specifications and features, such as measurement ranges for diameter, temperature, pressure, accuracy levels, materials, and output options.
3) It provides instructions for installation, operation, and setting coefficients to calibrate the meter via the control keys on the front panel.
Target flowmeter catalog Z100TF
(1) The document describes a target flow meter that uses modern sensor and computer technology to measure flow. It has accuracy comparable to Coriolis flow meters and is widely used in industries like petroleum, chemicals, energy, and water.
(2) The flow meter consists of a measurement tube, pressure target, sensors, and an integrated microcomputer. It measures flow based on the pressure applied to the target from the kinetic energy of flowing medium.
(3) The flow meter can be configured for different applications and has outputs like LCD display, 4-20mA current, 0-10V voltage, pulse, and RS485. It is installed in pipe systems and calibrated using its interface of four buttons.
Iocl
The document provides information about a seminar on the IOCL complex refinery located in Panipat, Haryana. It discusses the instrumentation used at the refinery to monitor and control various processes. It describes the main control system used, various temperature measurement techniques like thermocouples, thermistors, and RTDs. It also discusses level measurement using differential pressure, capacitance, displacers/floats, and bubblers. Additional topics covered include pressure measurement, flow measurement using orifice plates and venturi meters, and an introduction to programmable logic controllers.
Toshniwal - Thermal mass flow meters and controller
THERMAL MASS FLOW METERS AND CONTROLLER
The range of Thermal Mass Flow Meters from Bronkhorst address high accuracy in low flow rate scenarios like those seen in laboratory and Pilot plant usages. With a housing designed for laboratory and clean processing conditions, the instruments are truly unique in their capability to measure and control flow ranges between 0,014…0,7 mln/min and 8…1670 ln/min with pressure rating between vacuum and 400 bar – all in one range of instruments.
FEATURES
Rangeability in digital mode up to 1:150
High accuracy (standard 0,5% Rd plus 0,1% FS)
Pressure ratings 64 / 100 bar
Highly resistant to mechanical shocks and pressure fluctuations
Large range of Input/output options to choose from
Extremely fast and dynamic response
User configurable control characteristics
Applications
Analytical/environmental equipment
Gas flow monitoring in food, chemical and petrochemical industries
Gas consumption measurement in gas distribution systems for internal accounting purposes
Detection of gas leakage through objects
Semiconductor manufacturing
Surface treatment installations
Calibracion de presion
Fluke provides a range of pressure calibrators and modules to calibrate pressure instrumentation in process plants. Their calibrators can accurately measure pressure using internal sensors or external pressure modules up to 10,000 psi. They can also source pressure using built-in pumps or external pumps. The document describes how to use the Fluke 718 pressure calibrator to calibrate a pressure transmitter by applying varying pressures and measuring the corresponding milliamp outputs to check for errors.
Control System Components
Control System Components
*Pressure Measurement.
*Temperature Measurement.
*Flow Measurement.
*Level Measurement.
*Concentration Measurement.
Recommended
Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx
The Test Rig is Pneumatic Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
hydraulic-pressure-testing-rig.pptx
The Test Rig is Electro Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document.
With this Test Rig, Operator can work independently.
The entire Test as specified can be done on this Test Rig.
Neometrix is very focused on systems & services which can be of immense use to you. We specialize in Hydraulic/ Servo Hydraulic Test Systems, Fuel System Test Rigs, Pneumatic System Test Rigs, Oxygen/ Special Gases system Test Rigs, Very High Pressure Systems, Electronic & Electrical Test Rigs.
Pressure Indicator.
Fluid Level Indicators
Emergency stop switch
Filtration System.
Pressure regulator valve
Cooling line pressure Indicator(0-25 bar)
Target flowmeter catalog.zero100tf
The document provides information on the Target Flow meter, including:
1) It describes the structure and principle of operation, which uses pressure sensors to measure the pressure force on a target from the flow of liquid or gas through the measurement tube.
2) It lists the main technical specifications and features, such as measurement ranges for diameter, temperature, pressure, accuracy levels, materials, and output options.
3) It provides instructions for installation, operation, and setting coefficients to calibrate the meter via the control keys on the front panel.
Target flowmeter catalog Z100TF
(1) The document describes a target flow meter that uses modern sensor and computer technology to measure flow. It has accuracy comparable to Coriolis flow meters and is widely used in industries like petroleum, chemicals, energy, and water.
(2) The flow meter consists of a measurement tube, pressure target, sensors, and an integrated microcomputer. It measures flow based on the pressure applied to the target from the kinetic energy of flowing medium.
(3) The flow meter can be configured for different applications and has outputs like LCD display, 4-20mA current, 0-10V voltage, pulse, and RS485. It is installed in pipe systems and calibrated using its interface of four buttons.
Iocl
The document provides information about a seminar on the IOCL complex refinery located in Panipat, Haryana. It discusses the instrumentation used at the refinery to monitor and control various processes. It describes the main control system used, various temperature measurement techniques like thermocouples, thermistors, and RTDs. It also discusses level measurement using differential pressure, capacitance, displacers/floats, and bubblers. Additional topics covered include pressure measurement, flow measurement using orifice plates and venturi meters, and an introduction to programmable logic controllers.
Toshniwal - Thermal mass flow meters and controller
THERMAL MASS FLOW METERS AND CONTROLLER
The range of Thermal Mass Flow Meters from Bronkhorst address high accuracy in low flow rate scenarios like those seen in laboratory and Pilot plant usages. With a housing designed for laboratory and clean processing conditions, the instruments are truly unique in their capability to measure and control flow ranges between 0,014…0,7 mln/min and 8…1670 ln/min with pressure rating between vacuum and 400 bar – all in one range of instruments.
FEATURES
Rangeability in digital mode up to 1:150
High accuracy (standard 0,5% Rd plus 0,1% FS)
Pressure ratings 64 / 100 bar
Highly resistant to mechanical shocks and pressure fluctuations
Large range of Input/output options to choose from
Extremely fast and dynamic response
User configurable control characteristics
Applications
Analytical/environmental equipment
Gas flow monitoring in food, chemical and petrochemical industries
Gas consumption measurement in gas distribution systems for internal accounting purposes
Detection of gas leakage through objects
Semiconductor manufacturing
Surface treatment installations
Calibracion de presion
Fluke provides a range of pressure calibrators and modules to calibrate pressure instrumentation in process plants. Their calibrators can accurately measure pressure using internal sensors or external pressure modules up to 10,000 psi. They can also source pressure using built-in pumps or external pumps. The document describes how to use the Fluke 718 pressure calibrator to calibrate a pressure transmitter by applying varying pressures and measuring the corresponding milliamp outputs to check for errors.
Control System Components
Control System Components
*Pressure Measurement.
*Temperature Measurement.
*Flow Measurement.
*Level Measurement.
*Concentration Measurement.
DP Transmitter
This document summarizes a differential pressure transmitter. It discusses that a differential pressure transmitter senses the difference in pressure between two ports and produces an output signal proportional to the calibrated pressure range. It then describes the construction of an industrial differential pressure transmitter, which has two housings, with the pressure sensing element in the bottom half and electronics in the top half. It also outlines the internal arrangement of the transmitter including the direct pressure sensing element, signal conditioning electronics, and 2-wire 4-20mA current output. Finally, some common uses and the advantages and disadvantages of differential pressure transmitters are listed.
Combined control unit ppt
The test rig is a fully computerized and automated system used to test servo hydraulic actuators from aviation components like helicopters and fighter planes. It can control up to 120 testing sequences and generate customized reports. The rig can test any servo hydraulic actuator through various tests like frequency response analysis, load and displacement simulations, and measuring cyclic tests. It is operated either automatically through pre-programmed software or manually without software control.
Hydraulic flushing rig ppt
This document describes the specifications of a hydraulic flushing rig. It can be used to clean systems contaminated with large amounts of debris. The rig contains:
- A 300 liter stainless steel tank for hydraulic oil
- Pumps capable of 58 LPM at 350 kg/cm2 pressure
- Filters down to 2 microns to clean the oil
- A heat exchanger to control oil temperature below 60°C
- All piping and fittings are stainless steel for use with water or oil-based fluids
- Gauges and controls mounted on a stainless steel panel
- It can clean systems to a NAS 6 cleanliness standard and is certified.
Process control lab manual
1. The document describes several experiments related to process control systems, including temperature control loops, pressure control loops, flow control loops, and level control loops. It also covers programming a PLC and using a distributed control system.
2. The experiments are intended to study the elements of different control loops, take readings by varying set points, and observe the behavior of processes under control.
3. Programming concepts covered include logic gates, adders, multiplexers, and programming a PLC using ladder logic. The document also provides an overview of DCS systems and architectures.
Pressure measurement
The document discusses various pressure measurement instruments such as pressure gauges, pressure switches, differential pressure gauges, and pressure transmitters. It describes the measuring principles, components, installation guidelines, and factors to consider when selecting pressure instruments for applications involving gases, liquids, and other process media. Proper instrument selection and installation is important to ensure accurate pressure measurement over the operating temperature and pressure ranges.
Down Pipe Liquid Level Sensor
The KING-GAGE 780XD Purge Control is an extremely rugged unit designed specifically for hazardous areas requiring flameproof or ATEX (Ex d) rating. A proprietary wet check assembly ensures positive seal of fluids to ensure containment integrity. Loop powered transmitter provides 4-20mAdc output while components are isolated from the process media by a continuous air purge. Total consumption rate is less than 0.083 scfm for energy saving operation with external air/gas supply.The only internal element is a simple length of pipe extending into the tank.
Downpipe Liquid Level Sensor Purge Control
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
basicsinstrumentandcontrol-170425220125.pptx
The document provides an overview of an instrumentation and control course, including topics such as pressure, flow, level, and temperature measurement, as well as control valves, loops, and systems. The course contents section details concepts related to process measurement and control, including control loops and components, classifications of control loops, piping and instrumentation diagrams, and basic process measurement terminology.
Hydraulic Turbine Flow Meters (flo-tech)
Overview of Badger Meter's Flo-tech range of hydraulic turbine flow meters. Flo-tech products are used in hydraulic testing and analysis and on equipment in a variety of industries, including; agriculture, automotive, construction, forestry, marine and mining.
Anaesthesia workstation
An anesthesia workstation integrates components for anesthesia administration into one unit. It consists of an anesthesia machine, vaporizers, ventilator, breathing system, scavenging system, and monitors. Key components include the gas supply system, which receives gases from cylinders and pipelines and regulates pressures, and the vaporizer manifold and anesthetic vaporizers. Modern workstations have additional safety features to prevent delivery of hypoxic gas mixtures and other hazards.
Submersible Hydrostatic Level Indicators
Submersible level transmitters use a silicon piezo-resistive pressure sensor to measure liquid depth and convert it to an analog signal. They have a fully welded 316 stainless steel structure and are IP68 rated. Submersible level transmitters with a digital indicator have an integrated sensing element and circuit sealed in the probe housing, requiring no external calibration. Low range pressure transmitters integrate a pressure sensor where applied pressure deforms the diaphragm proportionally, detected by a silicon sensor in an oil-filled stainless steel case. The sensor uses four piezo-resistors in a Wheatstone bridge to detect membrane deformation from pressure differences.
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
Labtronixed Inc is leading of horizontal Rectangular autoclaves. Sterilization is a process of killing microorganisms with the help of a steam sterilizer at 121°C to 134°C & a steam pressure of 15 to 30 PSI as require. These horizontal autoclaves are front loading in design, we designed in cylindrical or rectangular shapes small and big size with both is size.
Introduction to Boiler Control Systems
CONTENTS
1. INTRODUCTION
2. TYPES OF CONTROLS
3. GENERAL REQUIREMENTS
4. CONTROL LOOPS
5. APPENDIX: REFERENCES
Dosing pump catalog
Dosing pump for water treatment
As a senior sourcing expert on water treatment facilities and accessories, our procurement covers a comprehensive range of water treatment facilities and components, mainly including FRP water tanks, membrane housings, membrane elements, cartridges, security filters, metering pumps, etc. These products are widely used in drinking water, commercial water, municipal, medical, food and other fields.
We integrate upstream supply chain products of the water treatment industry. In addition, we work with renowned suppliers and manufacturers. As a result, we can continuously supply high-quality water treatment components and systems for customers across the world to meet the needs of a wide range of applications, thereby optimizing water resources and promoting the sustainable development of the global environment.
If you are looking for water treatment facilities and accessories. Please contact
E-mail: jon@membranehousing.org
Mobile: +86-15633187985 (WhatsApp, WeChat)
Hydraulic Control Valve Test Bench.pptx
Neometrix make Hydraulic Control Valve Test Bench (Model: NEA1811) is designed specially to cover almost all high pressure,high flow and high temperature precise testing requirements of both Industrial and Mobile Hydraulic application Industries. This test stand has been proved to enable test labs to test hydraulic valves at pressure up to 420 bar and with maximum flow up to 400 lpm at temperature up to 85 °C.
Machine is capable of doing following tests with accuracy for both Mobile and Industrial Hydraulic valves-
Endurance Test
Hysteresis Test
Impulse Test
Flow Compensation Test
Flow Accuracy Test
Response Time Test
Pressure Drop Test
Leakage Test
Pull In & Drop Out Test
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANT
Role of control and instrumentation in thermal power plant.
Use of various instruments for the measurements of flow, pressure and temperature in industries.
Shilpa ppt thermal plant copy
The document provides an overview of instrumentation and control systems used in a thermal power plant. It describes the key components measured including pressure, temperature, flow, level and vibration. It then explains the various sensors and instruments used to measure these variables, including bourdon tubes, thermocouples, RTDs, orifice plates, and analyzers. It also describes the control room and various labs used for maintenance and calibration of instrumentation. The objectives of instrumentation are listed as efficient, economic and safe operation of the plant along with pollution control.
Converter station water-cooled pump vibration monitoring and condition assess...
In High Voltage Direct Current(HVDC) Transmission Systems, high intelligence and reliability is demand more. It’s urgently necessary to run a real-time monitoring system on converter station water-cooled pump. From the functional requirements of the monitoring system, describes the structure of the proposed converter station water-cooled pump vibration signal monitoring systems, data acquisition unit of hardware and software systems. In accordance with vibration severity in GB/T 29531-2013, As a water-cooled pump monitoring and early warning threshold, based on LabVIEW, We developed a water-cooled pump monitoring system software. Test results show that the system can effectively monitor the water-cooled pump’s working conditions.
INDUSTRIAL TRAINING REPORT AT PRABHULINGESHWAR SUGARS
The document provides details about an industrial training report submitted by Shivkumar Kashinath S Jayadhar at Prabhulingeshwar Sugars and Chemicals Ltd in Jamkhandi, Karnataka, India from June 10th to July 9th 2016. The report covers the trainee's investigation of various transducers used to monitor key process parameters like pressure, temperature, flow, level, Brix, pH, etc. at the sugar factory. It provides working principles, diagrams, specifications and advantages/disadvantages of different pressure measurement instruments like Bourdon tube gauges, diaphragm gauges, capsule gauges and bellows gauges.
Bioreactor
The document describes the BioFlo 310 benchtop fermentor system. It can control up to 32 parameters each for 1-4 fermentors simultaneously (128 total). The system includes a compact control station with a 15" touchscreen and built-in pumps. Glass vessels are available in sizes from 1.6L to 14L. The system offers advanced control capabilities, customization options, and is suitable for research through production applications.
Standard Reomte Control Interface - Neometrix
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Integrated Test Rig For HTFE-25 - Neometrix
The purpose of Integrated Test Rig is to assess performance of Fuel Cooled Oil Cooler (FCOC), HP Pump & Oil Pump prior to fitment on Aero Engine. The design of rig is such that it can cater to individual testing of individual LRU or integrated testing of all the LRU’s installed together (in combination). The pumps under test shall be mounted directly on the high-speed electric motor flange through adapter quill shaft assembly. Variable speed drives shall be provided for all the pumps under testing. The rig shall cater for real time monitoring and recording of performance parameters.
KEY FEATURES
Key features of this Rig are as follows: -
1. It has separate power packs for both the fluids i.e. ATF Power pack for ATF Fluid, OX Power Pack for OX-27 Oil.
2. This Rig is designed for high temperature Application. It works on 200 deg. Celsius.
3. Two Dedicated heating systems have been integrated with this Rig to raise the temperature of OX-27 Oil.
4. In both Power Packs insulated tanks are being used, which is good for safe operation and safety of operator.
5. This rig is designed in such a way, that it’s OX power pack is in its left side, ATF Power pack is in right Side and test bed is in Centre.
6. A big Test bed have been provided for smooth testing of UUT’s.
7. All piping is being insulated for safe operation and maintenance.
8. It comprises with DAQ System.
9. This rig can test several components at a time, together or separately.
Application
All the UUT’s are mounted on HTFE-25 Engine after successful performance testing of those. Application of this Rig are as follows: -
1. One of its application is to test LP Pump of HTFE-25. It is designed for functional testing of LP Pump.
a. Free Flow Test
b. Load Test
2. It is used to test HP Pump of HTFE-25. It is designed for functional testing of HP Pump.
a. Free Flow Test
b. Load Test
3. It is used to test Oil Pump of HTFE-25. It is designed for functional testing of Oil Pump.
4. It is used to test FCOC of HTFE-25.
More Related Content
Similar to KU-7 Leak Tester
DP Transmitter
This document summarizes a differential pressure transmitter. It discusses that a differential pressure transmitter senses the difference in pressure between two ports and produces an output signal proportional to the calibrated pressure range. It then describes the construction of an industrial differential pressure transmitter, which has two housings, with the pressure sensing element in the bottom half and electronics in the top half. It also outlines the internal arrangement of the transmitter including the direct pressure sensing element, signal conditioning electronics, and 2-wire 4-20mA current output. Finally, some common uses and the advantages and disadvantages of differential pressure transmitters are listed.
Combined control unit ppt
The test rig is a fully computerized and automated system used to test servo hydraulic actuators from aviation components like helicopters and fighter planes. It can control up to 120 testing sequences and generate customized reports. The rig can test any servo hydraulic actuator through various tests like frequency response analysis, load and displacement simulations, and measuring cyclic tests. It is operated either automatically through pre-programmed software or manually without software control.
Hydraulic flushing rig ppt
This document describes the specifications of a hydraulic flushing rig. It can be used to clean systems contaminated with large amounts of debris. The rig contains:
- A 300 liter stainless steel tank for hydraulic oil
- Pumps capable of 58 LPM at 350 kg/cm2 pressure
- Filters down to 2 microns to clean the oil
- A heat exchanger to control oil temperature below 60°C
- All piping and fittings are stainless steel for use with water or oil-based fluids
- Gauges and controls mounted on a stainless steel panel
- It can clean systems to a NAS 6 cleanliness standard and is certified.
Process control lab manual
1. The document describes several experiments related to process control systems, including temperature control loops, pressure control loops, flow control loops, and level control loops. It also covers programming a PLC and using a distributed control system.
2. The experiments are intended to study the elements of different control loops, take readings by varying set points, and observe the behavior of processes under control.
3. Programming concepts covered include logic gates, adders, multiplexers, and programming a PLC using ladder logic. The document also provides an overview of DCS systems and architectures.
Pressure measurement
The document discusses various pressure measurement instruments such as pressure gauges, pressure switches, differential pressure gauges, and pressure transmitters. It describes the measuring principles, components, installation guidelines, and factors to consider when selecting pressure instruments for applications involving gases, liquids, and other process media. Proper instrument selection and installation is important to ensure accurate pressure measurement over the operating temperature and pressure ranges.
Down Pipe Liquid Level Sensor
The KING-GAGE 780XD Purge Control is an extremely rugged unit designed specifically for hazardous areas requiring flameproof or ATEX (Ex d) rating. A proprietary wet check assembly ensures positive seal of fluids to ensure containment integrity. Loop powered transmitter provides 4-20mAdc output while components are isolated from the process media by a continuous air purge. Total consumption rate is less than 0.083 scfm for energy saving operation with external air/gas supply.The only internal element is a simple length of pipe extending into the tank.
Downpipe Liquid Level Sensor Purge Control
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
basicsinstrumentandcontrol-170425220125.pptx
The document provides an overview of an instrumentation and control course, including topics such as pressure, flow, level, and temperature measurement, as well as control valves, loops, and systems. The course contents section details concepts related to process measurement and control, including control loops and components, classifications of control loops, piping and instrumentation diagrams, and basic process measurement terminology.
Hydraulic Turbine Flow Meters (flo-tech)
Overview of Badger Meter's Flo-tech range of hydraulic turbine flow meters. Flo-tech products are used in hydraulic testing and analysis and on equipment in a variety of industries, including; agriculture, automotive, construction, forestry, marine and mining.
Anaesthesia workstation
An anesthesia workstation integrates components for anesthesia administration into one unit. It consists of an anesthesia machine, vaporizers, ventilator, breathing system, scavenging system, and monitors. Key components include the gas supply system, which receives gases from cylinders and pipelines and regulates pressures, and the vaporizer manifold and anesthetic vaporizers. Modern workstations have additional safety features to prevent delivery of hypoxic gas mixtures and other hazards.
Submersible Hydrostatic Level Indicators
Submersible level transmitters use a silicon piezo-resistive pressure sensor to measure liquid depth and convert it to an analog signal. They have a fully welded 316 stainless steel structure and are IP68 rated. Submersible level transmitters with a digital indicator have an integrated sensing element and circuit sealed in the probe housing, requiring no external calibration. Low range pressure transmitters integrate a pressure sensor where applied pressure deforms the diaphragm proportionally, detected by a silicon sensor in an oil-filled stainless steel case. The sensor uses four piezo-resistors in a Wheatstone bridge to detect membrane deformation from pressure differences.
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
Labtronixed Inc is leading of horizontal Rectangular autoclaves. Sterilization is a process of killing microorganisms with the help of a steam sterilizer at 121°C to 134°C & a steam pressure of 15 to 30 PSI as require. These horizontal autoclaves are front loading in design, we designed in cylindrical or rectangular shapes small and big size with both is size.
Introduction to Boiler Control Systems
CONTENTS
1. INTRODUCTION
2. TYPES OF CONTROLS
3. GENERAL REQUIREMENTS
4. CONTROL LOOPS
5. APPENDIX: REFERENCES
Dosing pump catalog
Dosing pump for water treatment
As a senior sourcing expert on water treatment facilities and accessories, our procurement covers a comprehensive range of water treatment facilities and components, mainly including FRP water tanks, membrane housings, membrane elements, cartridges, security filters, metering pumps, etc. These products are widely used in drinking water, commercial water, municipal, medical, food and other fields.
We integrate upstream supply chain products of the water treatment industry. In addition, we work with renowned suppliers and manufacturers. As a result, we can continuously supply high-quality water treatment components and systems for customers across the world to meet the needs of a wide range of applications, thereby optimizing water resources and promoting the sustainable development of the global environment.
If you are looking for water treatment facilities and accessories. Please contact
E-mail: jon@membranehousing.org
Mobile: +86-15633187985 (WhatsApp, WeChat)
Hydraulic Control Valve Test Bench.pptx
Neometrix make Hydraulic Control Valve Test Bench (Model: NEA1811) is designed specially to cover almost all high pressure,high flow and high temperature precise testing requirements of both Industrial and Mobile Hydraulic application Industries. This test stand has been proved to enable test labs to test hydraulic valves at pressure up to 420 bar and with maximum flow up to 400 lpm at temperature up to 85 °C.
Machine is capable of doing following tests with accuracy for both Mobile and Industrial Hydraulic valves-
Endurance Test
Hysteresis Test
Impulse Test
Flow Compensation Test
Flow Accuracy Test
Response Time Test
Pressure Drop Test
Leakage Test
Pull In & Drop Out Test
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANT
Role of control and instrumentation in thermal power plant.
Use of various instruments for the measurements of flow, pressure and temperature in industries.
Shilpa ppt thermal plant copy
The document provides an overview of instrumentation and control systems used in a thermal power plant. It describes the key components measured including pressure, temperature, flow, level and vibration. It then explains the various sensors and instruments used to measure these variables, including bourdon tubes, thermocouples, RTDs, orifice plates, and analyzers. It also describes the control room and various labs used for maintenance and calibration of instrumentation. The objectives of instrumentation are listed as efficient, economic and safe operation of the plant along with pollution control.
Converter station water-cooled pump vibration monitoring and condition assess...
In High Voltage Direct Current(HVDC) Transmission Systems, high intelligence and reliability is demand more. It’s urgently necessary to run a real-time monitoring system on converter station water-cooled pump. From the functional requirements of the monitoring system, describes the structure of the proposed converter station water-cooled pump vibration signal monitoring systems, data acquisition unit of hardware and software systems. In accordance with vibration severity in GB/T 29531-2013, As a water-cooled pump monitoring and early warning threshold, based on LabVIEW, We developed a water-cooled pump monitoring system software. Test results show that the system can effectively monitor the water-cooled pump’s working conditions.
INDUSTRIAL TRAINING REPORT AT PRABHULINGESHWAR SUGARS
The document provides details about an industrial training report submitted by Shivkumar Kashinath S Jayadhar at Prabhulingeshwar Sugars and Chemicals Ltd in Jamkhandi, Karnataka, India from June 10th to July 9th 2016. The report covers the trainee's investigation of various transducers used to monitor key process parameters like pressure, temperature, flow, level, Brix, pH, etc. at the sugar factory. It provides working principles, diagrams, specifications and advantages/disadvantages of different pressure measurement instruments like Bourdon tube gauges, diaphragm gauges, capsule gauges and bellows gauges.
Bioreactor
The document describes the BioFlo 310 benchtop fermentor system. It can control up to 32 parameters each for 1-4 fermentors simultaneously (128 total). The system includes a compact control station with a 15" touchscreen and built-in pumps. Glass vessels are available in sizes from 1.6L to 14L. The system offers advanced control capabilities, customization options, and is suitable for research through production applications.
Similar to KU-7 Leak Tester (20)
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
Rectangular & Cylindrical Horizontal Autoclave Manufacturer in India
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANT
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANT
Converter station water-cooled pump vibration monitoring and condition assess...
Converter station water-cooled pump vibration monitoring and condition assess...
INDUSTRIAL TRAINING REPORT AT PRABHULINGESHWAR SUGARS
INDUSTRIAL TRAINING REPORT AT PRABHULINGESHWAR SUGARS
More from Neometrix_Engineering_Pvt_Ltd
Standard Reomte Control Interface - Neometrix
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Integrated Test Rig For HTFE-25 - Neometrix
The purpose of Integrated Test Rig is to assess performance of Fuel Cooled Oil Cooler (FCOC), HP Pump & Oil Pump prior to fitment on Aero Engine. The design of rig is such that it can cater to individual testing of individual LRU or integrated testing of all the LRU’s installed together (in combination). The pumps under test shall be mounted directly on the high-speed electric motor flange through adapter quill shaft assembly. Variable speed drives shall be provided for all the pumps under testing. The rig shall cater for real time monitoring and recording of performance parameters.
KEY FEATURES
Key features of this Rig are as follows: -
1. It has separate power packs for both the fluids i.e. ATF Power pack for ATF Fluid, OX Power Pack for OX-27 Oil.
2. This Rig is designed for high temperature Application. It works on 200 deg. Celsius.
3. Two Dedicated heating systems have been integrated with this Rig to raise the temperature of OX-27 Oil.
4. In both Power Packs insulated tanks are being used, which is good for safe operation and safety of operator.
5. This rig is designed in such a way, that it’s OX power pack is in its left side, ATF Power pack is in right Side and test bed is in Centre.
6. A big Test bed have been provided for smooth testing of UUT’s.
7. All piping is being insulated for safe operation and maintenance.
8. It comprises with DAQ System.
9. This rig can test several components at a time, together or separately.
Application
All the UUT’s are mounted on HTFE-25 Engine after successful performance testing of those. Application of this Rig are as follows: -
1. One of its application is to test LP Pump of HTFE-25. It is designed for functional testing of LP Pump.
a. Free Flow Test
b. Load Test
2. It is used to test HP Pump of HTFE-25. It is designed for functional testing of HP Pump.
a. Free Flow Test
b. Load Test
3. It is used to test Oil Pump of HTFE-25. It is designed for functional testing of Oil Pump.
4. It is used to test FCOC of HTFE-25.
Neometrix Optical Balloon Theodolite.pptx
Neometrix Optical Balloon Theodolite
• In common with other land based balloon theodolites the Neometrix theodolite OT-NEA3060 has a telescope with a bent optical axis. A secondary wide-angle telescope using the same eyepiece is selectable with a mirror. There are two pins on the tip of this instrument that serve as contacts to an attachable battery case. The Photo shows the theodolite with the battery case attached.
• In the photo above you can see the bubble level directly under the two switches. The switches control illumination of the reticule and the circles.
• You can see the accessories for this instrument, filters for the eye piece, the key to the case, lens shade, lens cap and a plumb bob. Also note the hook for hanging a stopwatch and the magnifying glass to assist reading the circles.
• Distinguishing features of the OT-NE-A3060 theodolite are the use of a Pentagonal Prism in the bent axis telescope, which allows for better stability of the optical alignment, a closed circle design for durability, two levels of magnification offering wide and narrow fields of view (accomplished with a switchable finder scope using the same eyepiece with two objectives) and a lined gradicule supporting the tail method of altitude determination. The placement of the azimuth and elevation circles directly above each other as well as the use of Micrometer drums facilitates rapid determination of Azimuth and elevation directly to the 10th of a degree.
Dynamometer Engine Test Rig for engines parameters RPM
An Eddy current dynamometer is an electromechanical energy conversion device, which converts mechanical energy to electrical energy. It fundamentally uses Faraday’s Law of electromagnetic induction as its working principle.
In this system we test different ranges of engines RPM, Torque in N-m, and Power. And parameters will be shown in panel.
Power- up to 200 KW
Torque- 1780 N-m
Engine for testing with a range of 1500- 2000 rated rpm.
Engine monitoring system: Control panel with digital meters, oil pressure, lube oil temperature, water temperature, Engine RPM.
Engine parameter recording: A computer based data logger to record engine control parameters. A printer to be provided for printout report of all engines parameter.
And parallel we can record engines parameter like Lube oil pressure, Engine temperature, water temperature etc.
Mechanical Dimensions:-
• Overall Size: 2000 mm x 850mm x 1350 mm
• Centre Height: 900 mm
• Inlet Piping: 2”
• Outlet Piping: 2”
• Calibration Arm Length from centre: 1000 mm
• Cooling Water Requirement (Dynamometer Inlet) Pressure: 1.0-2.0 bars
• Temperature: Less than 40°C.
• Cooling Water Flow (Dynamometer Inlet): 12500 LPH
• Type of Lubrication: Grease (Inner earing), Oil (Outer Bearing)
Electrical:
• Supply Voltage:240 volts ± 10% AC, 50 Hz
• Separate Earth should be given to the system.
• Maximum Excitation: Internally set in the instrument depending on the capacity of Eddy current dynamometer. Generally, 3 To 5 Amps D.C.
• RPM: This is displayed by a 4 digit display. This displays Motor/dynamometer rpm.
• Accuracy: ± 1 rpm.
Environmental:
i) Temperature: 5 to 550C maximum
ii) Humidity: R.H. 95% maximum
Application:
Dynamometer system will test the engines parameters RPM, Torque, Power, Lube oil pressure, temperature, water temperature and result will be shown in control panel with digital meters.
Portable Digital Barometer for Indian Air force
Portable Barometer uses a silicon resonant pressure sensor DPS 8100 producing a pressure reading in pressure measurement units and pressure altitude. It also has a Comptek 10.1" tablet, mounted on an Aluminum enclosure. It can be used as a hand-held indicator tablet or instrument. The instrument can also communicate through a USB connector to extract out logged data. This USB port should be strictly used for App-related data transfer only. The instrument has an in-built tablet which should be used only for the TERPS App. The tablet is provided with a compatible charging adapter. This should be used only to charge the instrument. The instrument should be used within the operating and maximum safe working pressure conditions. Refer to the specification section in this manual for the details.
Sensor Port:
Keep the sensor port clean all the time. Protect the sensor against moisture, water, dirt and dust particles.
Do not block the sensor with any object as it may result in inaccurate reading output.
For better and accurate readings, keep the sensor port away from continuous pressure changing areas (for example, should not be close to AC, Fans, table fans etc.).
During pressure measurement, the device should be placed on the table or held in the orientation.
In case of hand-held application, hold the instrument as shown in Figure 3. While holding the unit, ensure that the hand does not block the sensor port.
USB Port:
This USB Port is specifically for extracting the exported data from the TERPS App. Do not use this port for any other activity. Use this port only for App-related data transfer. When not in use, close the USB port using the rubber cap.
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
PROJECT: TEST RIG FOR HYDRAULIC FLUID (A3987)
The test rig is used to test the anti-wear properties and the aging
behaviour of hydraulic fluids under defined and reproducible
conditions. For this purpose, a vane pump Vickers 35VQ25A-11*20
for ASTM D6973-2014 and a Bent Axis type axial piston pump
A2F10 for JCMAS P 045 are used as test objects. The subsequent
investigation of the wear inserts and oil condition then allows
conclusions about the performance of the tested fluids, especially
their ability to avoid wear and resist oxidation. The modern and
ergonomically designed test rig meets all the specifications of the
European Machinery Directive 2006/42/EG to a high standard or
equivalent Indian Standard. The test rig is used to determine the
wear characteristics and oxidation/ aging of non-petroleum and
petroleum hydraulic fluids. For this purpose, a rotary vane pump
generates a test pressure under specific boundary conditions. The
result obtained is the total mass loss from the cam ring and the ten
vanes (ASTM D6973-2014) after the test. For indicating oxidation
stability or aging behaviour of hydraulic fluids this test bench, uses a
bent axis pump A2FO10 and a pressure relief valve DBDS 10
K1X/400V as load at high temperatures. The test takes place under
the influence of air and a copper catalyst. This procedure allows for
an accelerated aging rate using a real hydraulic component. The test
rig parameters meet the specifications according to ASTM D6973-
2014 and JCMAS P 045. Additionally, it is capable of carrying out the
evaluation of hydraulic fluid for frictional characteristics and energy
efficiency performance under indigenously developed and
industrially simulated test methods by varying load, speed,
temperature, pressure, flow rate etc.
Hydraulic Loading System - Neometrix Defence
Hydraulic Loading System Serves the following purpose during engine run::
Loads the Engine mounted Hydraulic Pump by Varying the Outlet restriction to achieve specific Flow Rates at specified Pressure Range.
Carry out Cyclic Load Testing of the Hydraulic Pump.
There are six different module which after assembly become complete system.
Modules are following:
Oil tank module
Air Regulation module
Inlet module
Outlet module
Drain module
Loading valve module
Heat exchanger module
Portable oil filling module
KEY FEATURES
Design Pressure : 340 kg/cm2
Working Pressure : 270-295 kh/cm2
Working Flow : 20-210 LPM
Hydraulic Oil : MIL=H-5606/FH-51
Viscosity : 15CST @ 40°C
Density : 0.8735 AT 15.6°C
Tank Capacity : 175 Liters
Tank Max. Pressure : 10 kg/cm2
Max. Temp. at Pump Outlet : 100°C
Max. Temp. at Pump Intel : 80°C
Test Rig for 130LPM Pump of LCA- Neometrix
The Test Rig is self-contained, Electro Hydraulic Test Rig. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump. The brief spec and tests of this pump is given below as:
The brief specs of the pump-
Rated Pressure = 270 bars
Rated Flow = 130 LPM at 270 bar
Rated Speed = 6000 RPM
Application
The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump.
Key features
Drive System with Gear Box Lube Oil System
High Pressure System for Pressure Proof Testing
Low Pressure System for Functional Test
Control and Indicator Panel
Data Acquisition System.
The test rig is design to work up to 120°C.
Two moog make servo valves have been provided in Rig for Cyclic Test.
Cooling System: We are using water as the medium for the cooling purpose, with the help of Heat Exchanger. Total three heat exchanger has been provided in system.
Filtration: Proper filtration has been provided and the filters have electronic clogging indicators.
The rig is developed for Hydraulic Oil (MIL-H- 5606E) or equivalent.
Three SS 304 Reservoirs of oil capacity 90, 225 and 50 liters have been provided with all related fittings.
Safety Interlocks
The Pump will not start in case the Reservoir oil level is low/ high.
The Pump will stop/ will not start, in case the oil temperature goes beyond a set limit.
There would be alarm and indication, in case any abnormality happens.
In case any of the filters are clogged, there would be alarm; Indication and the Test rig will stop.
It is also independent of the Computer automation system.
Computer: The Rig Diagnostics/ Monitoring & Recording are implemented Through the National Instruments data acquisition System and PC. The customized Software is implemented in Lab View.
Lock Loading Test Rig (ERU119 & ERU120) .pptx
This rig is designed for testing Ejection Release Units (ERU119 & ERU120) which are tested for Hook Proving Loads. These units are tested for load deformation and the test results will automatically come out as OK/NG on the basis of pre-fed Deformation & Load settings in the system. A self-contained Test Bench is provided to test both types of units.
Mechanical System:
Independent Bench for ERU119 & ERU120 is provided.
Horizontal Loading Facility for the units is provided.
Custom made fixture for holding the units, and unit profile will be accommodated in the fixture so that the unit is not damaged during testing.
LVDT with magnetic contact is provided for displacement measurement.
Both systems have Load Cells with in-situ calibration facility. In- situ calibration will be done automatically.
starter-generator-test-bench-Catalog.pptx
The Following Test Bench is for Testing Parameters of Starter Generator of
Advanced Light Helicopter (ALH).
The Test bench has following four tests :-
1) Generator Mode Load and no Load Test.
2) Starter Mode Load Test.
3) Vibration Measurement Test.
4) Concentricity And Bar to Bar Difference Measurement Test.
Test Bench Description:
This test will have a Combination of AC Motor of 5000 RPM rigidly Coupled with the Dual Output Gear Box having Ratio of 1:3 to give maximum speed of 15000 RPM at output . The output is to accommodate the shaft of 6KW Starter Generator With Suitable Clamping On the Common Flange.
Resistive Load Bank with good Cooling Facility provides load to the Starter Generator in steps of 0,50,100,150 and 200 Amp with additional loads of 300A , 375A and 450 Amp .Load is selected from the control panel through selectable switches.
A.C. Drive ABB make is also provided for this Test with Control signals
From control panel.
45 KVA Ground Power Unit for Raphael .pptx
Ground Power Unit(GPU) is used to give the power to the aircraft which is in the ground during the maintenance and repair work the GPU is used to power up the system externally, This GPU is having Dual output one is 45Kva AC power that consist of L-L 200V and L-N 115V ,150A and 400HZ four wire system another one will be DC 28.5 V 800A two wire system and it will deliver the two output simultaneously up to maximum range of 45 KVA, the following components are used to design the GPU.
Overview: A diesel engine/electric motor coupled with highly reliable alternator provides a perfect output to your aircrafts. With a touchscreen control panel and interactive GUI, this GPU is easy to operate and effortless to maintain. Our AC Ground Power Unit can be supplied with additional 28.5V DC module for obtaining commercial power voltage for tools, appliances. etc. during aircraft maintenance. it is a feature-rich software built for remote operations of GSE with parameter details, fault alarms, alerts and periodic maintenance schedule.
Application
GPU is used to support the aircrafts in ground to maintain and trouble shoot its basic testing with out start up their engine, This will be designed on the required power of aircraft and this whole system is operated by diesel engine , The system is mounted on the portable moving trolley to provide the easy accessibility all over the ground which is towable with necessary braking system.
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications.
Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance.
Specifications
Neometrix Thermal Tester is Temperature Forcing Systems and environmental test chambers provide quality assurance through temperature cycling testing. We have used standard highly reliable FLIR camera for thermal scanning.
Thermal Tester is a mobile thermal testing solution capable of environmental stress testing throughout the semiconductor design, manufacturing, and back-end test processes.
Application
Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications.
Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance.
Key features
Thermal Tester is having following major features:
(a) Wide angle (min 50 degree horizontal) Infrared imaging camera with 640X480 pixels resolution or better.
(b) Thermal analysis software for hotspot and other faults detection.
(c) Automated enclosure with PCB test fixture for testing of PCB of dimension 16X16 inch or better.
(d) Power supply module with minimum eight relay to provide 230VAC/3A/50Hz and 28VDC/5A or better.
(e) Temperatures measurement range: -20 to 200 degrees Celsius.
Optical-test-bench-for-pcb-and-optic-testing.pptx
Optical test equipment or optical measurement equipment are used to measure and characterize the physical properties of light. The insatiable demand for higher capacity in communication networks has fueled the need for highly precise optical test solutions. In addition, precision optical measurements are essential to optical research applications for Defence communication, mobile communication, environmental sensing, and consumer products.
R&D engineers, academic researchers, manufacturing engineers, and field service personnel depend on precision optical test equipment to ensure design and performance specifications, production quality, and network health. For more than 10 years, Neometrix has delivered quality, consistency, ease of use, and market leadership for optical test applications.
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
Mobile Test Facility (MTF) - Neometrix Defenece
The proposed Mobile Test Facility (MTF) is a roadworthy self-sufficient test facility for testing of “Expandable Turbo Propulsion system (Expandable Engines) of up to 450kgf class” and is devised for Field Tests at various altitude sites in India ranging from sea level to High Altitudes.
“MTF” is proposed with modular design concept, where in each module is built and rigidly installed on a trailer with pre-designated system based on each modules infrastructure functionally required.
It consists Four Trailer mounted Modules-
1. Mobile Utility Trailer Module
2. Mobile Control Cabin Trailer Module
3. Engine Test Section Unit Trailer Module
4. High Pressure Mobile Compressor unit Module (Under GTRE Scope)
Operational Environment :-
1. Test Site Altitude: - From10 m above MSL to 4522 m above MSL
2. Test Site Temperature: -20°C to +50°C
3. Test Site Atmospheric Pressure: 0.57 Atm to 1 Atm
4. Test Site Humidity: 20% to 80%
Electrical General Requirements:
a. Voltage: 415 v ±10%, 3 phase.
b. Frequency: 50 hz +3%, -6%.
c. Aux voltage: 110 VAC (normal supply).
d. UPS voltage - 230 VAC for PLC Panel.
e. 24 V DC Control Circuits.
f. Main switch with emergency stop function.
g. Illuminated double push-button for ON/OFF.
h. Blue illuminated push-button for fault indication and acknowledgement.
i. Control of the test rig and the test programs via operating computer.
modern-universal-automatic-test-equipment.pptx
MODERN UNIVERSAL AUTOMATIC TEST EQUIPMENT(MUATE) is an equipment which is used to perform automatic measurements on the device, known as unit under test (UUT), device under test (DUT), and evaluate the test results. An MUATE has a computer controlled system that contains many complex test instruments that are capable of automatically testing and diagnosing faults in intricate electronic components, PCBs, Integrated circuits. It can test a large range of electronic devices and systems from ingenious components like resistors, inductors, capacitors to complex compiled electronic systems. To accomplish this intention, we are harnessing JIG/Fixture/ITAs.
MUATE systems designed to decrease the amount of test time needed to verify a particular PCB, Component, LRU.
MUATE contains Five subsystem
(a) JTAG
(b) Bed of Nails
(c) Boundary scan
(d) Data acquisition system
(e) Controller
JTAG helps users with PCB debugging, prototyping, testing and repairing.
By using the Bed of Nails (ICT-In circuit testing) we can check for short, open, resistance, capacitance, inductance, tracks, and many more
Components, with the help of boundary scan Test device pin signals or internal signals can be monitored in real-time without interfering with normal operation.
drive-and-control-automation-system.pptx
A drive and control automation system is designed for Helicopter Main Gear Box (MGB) load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware & software required for the drive and control automation system for the test rig.
The test rig is a mechanical closed loop system in which the rated speed of MGB is achieved by motor through lower adaptor gearbox. In order to achieve various loads such as thrust loads, torque load and hydraulic pump loads the hydraulic power packs with actuators will be employed. The hydraulic power packs consist of motor pumps, various process switches, sensors valve, etc. which facilitate remote operation of DAS (Data Acquisition System) of the test rig. An AC alternator which is mounted on MGB is to be loaded through resistive load bank with contactor panel.
HYDRAULIC REFILLING TROLLEY - NEOMETRIX DEFENCE
The HYDRAULIC REFILLING TROLLEY is specially designed and developed for the GROUND REFILLING of oil in aircraft systems. It is used for refilling oil in aircraft system through the supplied pressurized hydraulic oil from the trolley to the aircraft, comprising of a pressurized reservoir, with filtered and de- aerated fluid at flow and pressure characteristics required for testing. The Trolley is suitable for wide range of fighter aircraft, military transport aircraft, and helicopters used in Indian Air Force.
This Hydraulic refilling trolley is basically designed for charging Engine oil (Turbonyc Oil-210,Viscosity- 3.7 cst at 100 Deg Celcius )to AIRCRAFT.
Compressed nitrogen is fed from air bottle (BL) along the flexible hose ,through shutoff valve reducers for building up pressure inside the tanks.
The safety valve releases compressed nitrogen into the atmosphere in case pressure exceeds set value.The working fluid displaced by nitrogen pressure from the tank passes through filters and used for cleaning the fluid of mechanical admixtures and gets through aircraft charging adaptor to the AIRCRAFT.
universal-hydraulic-test-bench-aircrafts .pptx
The Neometrix Engineering Series NE-A0107 Universal Hydraulic Test Stands are designed for testing all kind of hydraulic components in various aircrafts & helicopters of Western/ Russian origin like SU-30, Jaguar, Mirage etc.
This is a WORK HORSE required in every ground support & testing establishment.
Virtually any hydraulic component can be tested on this Test Stand by making right hydraulic & electrical connections. It is also very popular with aviation R&D and Product development establishments.
NE-A0107 is heavily used for testing & validating the actuators, valves, accumulators, pumps, hydraulic motors and the hydraulic power packs. Integral drive and integral dynamometer are provided for testing pumps and motors. The NE-A0107 Series Test
Stands are available configured for use with MIL-H-5606, MIL-H-83282, MIL-H-87257 and MIL-H-46170 Hydraulic fluids. Customized OPTIONS are also available.
Key Features:
Cost-effective (International quality, INDIAN PRICE), accurate, automated, software driven, highly capable test system.
Fully Computerized Test Stand. Manual & Semi-Automatic options also available.
National Instruments PXI Based DAQ with Lab View based software
Operating Pressure: up to 3,000 PSI. Flow: up to 20 GPM. Static Pressure: up to 10,000 PSI.
Pumps drive: 5000 RPM, 200 HP. Dynamometer: 5000 RPM, 200 HP. Electrical DC supplies for power packs: 0-32 VDC, 1000 AMP.
Temperature control of hydraulic test circuits. Chilled Water & Air cooled options available.
Six Clamp Perfect Binding Machine
Machine's Salient Features :This is Multi Clamp Perfect Binding Machine, where 6 book clamps travelling in an oval shaped path and done a binding work in a perfect way. 1. In this spine is in line with the crucial binding systems.2. Milling Cutter Comes With Strip Type Cutter and Separate Waste Exhaust System. 3. Gluing System Which has 2 forward rollers and 1 reverse roller (In-built Heating) gives high Quality binding.4. Calibrated head and tail cut offs to avoid adhesive squeeze out.5. Online creasing attachment with Auto Cover feed makes more sense in production.6. Our machine has Optional feeder tray for manual feeding of gate folded covers.7. 'No book-No cover' system ensures the continuous flow of clamps.8. Height and Pressure adjustable ram for book blocks. 9. Moving type Cam Nipping system ensures perfect nipping cover registration.10. Chute delivery system with built in safety systems.
More from Neometrix_Engineering_Pvt_Ltd (20)
Dynamometer Engine Test Rig for engines parameters RPM
Dynamometer Engine Test Rig for engines parameters RPM
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Recently uploaded
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaKuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Recently uploaded (20)
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
KU-7 Leak Tester
- 3. The Test Rig is Electro Hydraulic. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig has been designed to address all the requirements of the Design Document. With this Test Rig, Operator can work independently. The entire Test as specified can be done on this Test Rig.
- 5. Arrangement to carry out static pressure testing of pipe assemblies of different sizes to a maximum pressure of 10000psi Digital gauges for pressure reading Timer for setting the test time duration. Pressure relief valve to hold a maximum pressure of 1000psi. Power and manual operated pumps are provided. Suitable cooling system is provided. A suitable safety HOOD is provided with focus light. QC/DC coupling is provided for pressure testing. All filters in the hydraulic circuit of Power Pack are provided with clogging indication.
- 9. Pressure Indicator: The maximum working pressure of the Rig is 10000 PSI. Two pressure transmitters are mounted one for return line pressure (0-25 bar) and one for main line pressure (0-10000) PSI. Two digital process indicators are mounted on panel. Fluid Level Indicators : A vertical fluid level indicator is mounted on front of tank to permit visual monitoring of the level inside the Tank. 3Filtration System: The filters are able to achieve the cleanliness in the working fluid. All filters that are used in the system are clogging indicators type. Once any of these filters get clogged the indication is shown on the front panel.
- 11. Thank You