The document discusses Glodon BIM software, including TAS, TRB, TBQ, and TME. It focuses on Glodon TAS, describing it as a quantity calculation software based on BIM technology that enables 3D measurement and calculation of building components from drawings or images. The advantages of TAS include high efficiency, security, flexibility and traceability. Potential disadvantages include a lack of experts, cost, and incompatibility with partners.

2. 
 TAS (BIM-based quantity takeoff software for
architecture and structure)
 TRB (BIM-based quantity takeoff software for rebar.)
 TBQ (BIM-based cost estimating software)
 TME (BIM-based quantity takeoff software for MEP.)
Glodon BIM softwares
available in market

3. 
Glodon BIM softwares
available in market
Glodon TAS Glodon TRB
Glodon TBQ Glodon TME

4. 
 Glodon Take off for Architectural and Structural,
also known as TAS, is a suite of quantity calculation
software based on the Building Information
Modelling (BIM) technology, which is embedded
with ground breaking 3-dimensional measurement
and calculation rules. It enables the users to perform
quantity taking-off from electronic drawings or
images with immediate 3D visualization effect and
shows accurate results for each component in real
time.
Glodon TAS

5. 
 Structural Element
 Architectural Element
 Finishing Work Internally and Externally
 Work Below Lowest Floor Level
Glodon TAS

6. 
 High efficiency and productivity
 High level of security
 High flexibility
 High traceability
Advantages

7. 
 Lack of experts
 Cost of software
 Incompatibility with partners
Disadvantages

8. 
 defining the project scope, schedule, and cost as
early as possible with the most efficient use of
resources and money
 Prepare detailed info for construction
 Prepare tender
Pre-construction Stage

9. 
 visualize the project by creating a virtual
environment or 3D-model.
 reduces the chances of miscalculation which
normally happens in manual take off during tender
preparation.
Advantages of BIM
software in this stage

10. 
 avoid the parallax error which cause by the naked
eyes.
 Provide more accuracy to the user compare to
traditional way.
Advantages of CAD
Measurement

11. 
 Consume more time compare to BIM.
Disadvantages of Manual
measurement