The document discusses energy, work, and power, defining these concepts and how they relate. It explains that energy can be converted from one form to another but is never created or destroyed according to the law of conservation of energy. Assessment tasks are provided to evaluate understanding of energy transfer and transformation within closed systems.
This is a summary of the topic "Energy, work and power" in the GCE O levels subject: Physics. Students taking either the combined science (chemistry/physics) or pure Physics will find this useful. These slides are prepared according to the learning outcomes required by the examinations board.
This is a summary of the topic "Energy, work and power" in the GCE O levels subject: Physics. Students taking either the combined science (chemistry/physics) or pure Physics will find this useful. These slides are prepared according to the learning outcomes required by the examinations board.
How International Is Our School? MA DissertationStephen Taylor
Title: A pilot-test of a visualization and set of evaluation rubrics for factors affecting the promotion of international-mindedness and global engagement (IMaGE) of a school.
Defining Inquiry for the PreK-12 continuum. Inquiry as a 'theory of everything' of good education, built on a solid foundation of well-taught knowledge, skills and concepts.
This is an assignment for my University of Bath MA in International Education, based on the tensions in transition from MYP to DP. It revolved around the different schools of through about learning and, most importantly, inquiry. It focuses on the different approaches to inquiry characterised by Dewey and Vygotsky, before moving onto a modern look at evidence-based practices.
MA International Education University of Bath assignment (Education in and International Context).
In this assignment I have tried to propose an original idea for helping schools define and measure the degree to which they demonstrate the values of international education.
I use this lab sequence over a couple of lessons to get to grips with some basics of different types of reactions, balancing, writing formulas and problem-solving.
In this formative in-class Criterion C task, we connect the content from the last unit with some basics on Forces, using the Red Bull Stratos jump as a basis.
This presentation is for my class to work through as teachers are on a series of PD days. It is based on a very bad One Direction joke cracked in a class about vectors.
I split the presentation for the unit into two, as I added so many slides to help with student questions and misconceptions. This one focuses on mathematical aspects of the unit.
In the first week of High School, my Grade 9 Chemistry class were asked to put on a short show for the BBP and KA students (3-5 year-olds) about water. We used it as a chance to get to know each other and to formatively assess Criterion B: Communication and F: Attitudes in Science.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
AI for Every Business: Unlocking Your Product's Universal Potential by VP of ...
Energy, Work & Power
1. Energy, Work and Power
Canadian Academy, Kobe
draft presentation under revision staylor@canacad.ac.jp
2. Energy, Work & Power
Unit Question: “How is energy used to produce change?”
Areas of interaction:
Human ingenuity
We design machines to maximise efficiency
Criterion Assessment Tasks
3. Energy, Work & Power
Assessment Statements
• Define energy
• Identify the form(s) of energy possessed by an object or system
• Distinguish between kinetic and potential energy
• Compare the relative quantities of a form of energy possessed by a set of objects.
• Define work
• Identify how work affects the quantity of energy in an object
• Define power
• Apply power to the time and work needed to complete a task.
• State the SI or commonly-used units for work, energy and power
[including Joules (J), Watts (W), Calories, kcal, kiloWatt hours (kWh)]
• Define efficiency
• Apply efficiency to the energy or power needed to complete a task.
• State the principle of conservation of energy
• Apply work, power and conservation of energy to discuss energy transfers and
transformations in a closed system.
5. お元気ですか。
O-genki desu-ka?
“energetic”
Energy is the ability to do work.
Oh yeah, Grade 10.
6. Energy is the ability to do work.
Unit: joules (J)
Many types, including:
• Mechanical, Elastic, Gravitational, Kinetic
• Chemical, Thermal, Sound, Luminous
• Nuclear, Radiant, Magnetic, Electrical
• Potential (stored)
e.g. gravitational potential e.g chemical potential
e.g. elastic potential energy
http://www.clker.com
7. Energy is the ability to do work.
Potential energy can be converted to kinetic energy
e.g. gravitational potential
As the cart rolls down the hill,
gravitational potential energy is
converted to kinetic energy.
8. Energy is the ability to do work.
Unit: joules (J)
Many types, including:
• Mechanical, Elastic, Gravitational, Kinetic
• Chemical, Thermal, Sound, Luminous
• Nuclear, Radiant, Magnetic, Electrical
• Potential (stored)
e.g. gravitational potential
The action of a force to cause
displacement of an object.
Work (J) = force (N) x distance (m)
1 Joule = 1N x 1m
9. Get up the stairs! Use chemical potential energy to generate mechanical
energy to increase your gravitational potential energy!
Devise a method to determine how much work is done by each of the
members of your group in getting up the stairs. Consider vertical movement
only for now and the force as their weight. Show your working.
Extend your method to calculate the power of each
person as they ascend the stairs.
What variable can they change to be
‘more powerful’?
What about going down
the stairs?
Is running upstairs more
work that walking?
http://timeandplace.martenhendriks.nl/2008/07/july-21-stairs-drawing-marten-hendriks.html
10. Who has done the most work?
300kg 500N 500N
no movement 100kg
6m
10s
5s
http://www.clker.com/clipart-man-push.html
11. Who has done the most work?
Work = Force x Distance
300kg 500N 500N
no movement 100kg
6m
10s
5s
http://www.clker.com/clipart-man-push.html
12. Who has done the most work?
Work = Force x Distance
Work = 500N x 0m Work = 500N x 6m
= 0J = 3000J (3kJ)
300kg 500N 500N
no movement 100kg
6m
10s
5s
http://www.clker.com/clipart-man-push.html
13. Now who has done the most work?
Work = F x d
3600N
= _____J (__kJ)
300kg
Work = 500N x 6m
= 3000J (3kJ)
60s 10m
500N
100kg
6m
5s
http://www.clker.com/clipart-man-push.html
14. Now who has done the most work?
Work = 3600N x 10m
3600N
= 36,000J (36kJ)
300kg
Work = 500N x 6m
= 3000J (3kJ)
60s 10m
500N
100kg
6m
5s
http://www.clker.com/clipart-man-push.html
15. What is the gain in gravitational potential
energy of the rock, relative to the ground?
3600N
ug = weight x height
potential energy
due to gravity
300kg
60s 10m
http://www.clker.com/clipart-man-push.html
16. What is the gain in gravitational potential
energy of the rock, relative to the ground?
ug = weight x height
potential energy
due to gravity
300kg = 3000N x 10m
= 30,000J (30kJ)
10m
http://www.clker.com/clipart-man-push.html
17. Energy storage in a ball
Determine the type and magnitude of
energy stored in the ball held at 1m
height.
How much work is being done when you
lift the ball as high as you can?
How much work is being done when you
drop the ball to the ground?
Why doesn’t the ball bounce
back to the original starting
position?
18. Where did the rest of the energy go?
Work = 36,000J (36kJ)
ug = 30,000J (30kJ)
3600N
300kg
10m
http://www.clker.com/clipart-man-push.html
19. Energy is neither created
nor destroyed.
It can be transferred from one
object to another or transformed
from one form to another.
Law of conservation of energy.
(The First Law of Thermodynamics)
20. Where did the rest of the energy go?
Work = 36,000J (36kJ)
ug = 30,000J (30kJ)
3600N
Energy is neither created nor destroyed.
300kg
It can be transferred from one object to another or
transformed from one form to another.
Electrical energy
10m
http://www.clker.com/clipart-man-push.html
21. Where did the rest of the energy go?
Work = 36,000J (36kJ)
ug = 30,000J (30kJ)
3600N
Energy is neither created nor destroyed.
300kg
It can be transferred from one object to another or
transformed from one form to another.
Electrical energy
Mechanical energy
10m sound energy thermal energy
Kinetic energy
sound energy thermal energy
Gravitational
sound energy thermal energy
potential energy
http://www.clker.com/clipart-man-push.html
22. What energy transfers and transformations are taking place?
Energy In Energy Out
electrical luminous, sound, radiant, thermal
23. So… can an object do negative work?
When force causes a displacement, work (energy) is positive.
When force hinders a displacement, work (energy) is negative.
When force results in no displacement, there is no work.
Work is not a vector – but Force and displacement are.
Pushing the rock Pushing the rock up the
Holding the rock
up the hill hill – but the rock keeps
steady on the hill
rolling down
d
Aargh!
24. How much work is done by the man?
considers only the active force
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
25. How much work is done by the man?
considers only the active force
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
Work = 600N x 50m
= 30,000J (30kJ)
26. How much work is done by friction?
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
27. How much work is done by friction?
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
Work = -200N x 50m
= - 10,000J (-10kJ)
28. How much work is done by gravity?
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
29. How much work is done by gravity?
600N
FN
1000N
100kg
50m
Ffr Fapplied
200N 600N
Fg
200N
1000N
Work = 1000N x 0m
= 0J (0kJ)
30. Fail. The crane operator was not using his seatbelt. His mass (before impact) is 80kg.
Determine:
1. His ug relative to the ground (before).
2. His ug relative to the rock (before).
300kg
1. The work done by gravity (after).
Assume weight = force of gravity.
16m 10m
http://www.clker.com/clipart-man-push.html
31. Fail. The crane operator was not using his seatbelt. His mass (before impact) is 80kg.
Determine:
1. His ug relative to the ground (before).
ug = weight x height = 800N x 16m = 12,800J
2. His ug relative to the rock (before).
300kg
1. The work done by gravity (after).
Assume weight = force of gravity.
16m 10m
http://www.clker.com/clipart-man-push.html
32. Fail. The crane operator was not using his seatbelt. His mass (before impact) is 80kg.
Determine:
1. His ug relative to the ground (before).
ug = weight x height = 800N x 16m = 12,800J
2. His ug relative to the rock (before).
300kg ug = 800N x 6m = 4,800J
1. The work done by gravity (after).
Assume weight = force of gravity.
16m 10m
http://www.clker.com/clipart-man-push.html
33. Fail. The crane operator was not using his seatbelt. His mass (before impact) is 80kg.
Determine:
1. His ug relative to the ground (before).
ug = weight x height = 800N x 16m = 12,800J
2. His ug relative to the rock (before).
300kg ug = 800N x 6m = 4,800J
1. The work done by gravity (after).
Assume weight = force of gravity.
Work = F x d = 800N x 16m = 12,800J
16m 10m
http://www.clker.com/clipart-man-push.html
34. Energy is the ability to do work.
Unit: joules (J)
Many types, including:
• Mechanical, Elastic, Gravitational, Kinetic
• Chemical, Thermal, Sound, Luminous
• Nuclear, Radiant, Magnetic, Electrical
• Potential (stored)
e.g. gravitational potential
The action of a force to cause
When force causes a displacement, work (energy) is positive. displacement of an object.
When force hinders a displacement, work (energy) is negative.
When force results in no displacement, there is no work. Work (J) = force (N) x distance (m)
1 Joule = 1N x 1m
Power is the
rate of doing work or using energy.
work done (J) energy used (J)
Power (W) = =
1 Watt = 1J in 1s time (s) time (s)
35. Who has the most power?
a different guy work done (J)
Power (W) =
1 Watt = 1J in 1s time (s)
3600N
Crane =
300kg
Man =
60s 10m
500N
100kg
6m
5s
http://www.clker.com/clipart-man-push.html
36. Who has the most power?
work done (J)
Power (W) =
1 Watt = 1J in 1s time (s)
3600N
Crane = 36,000J =
60s
300kg
Man = 3000J =
5s
60s 10m
500N
100kg
6m
5s
http://www.clker.com/clipart-man-push.html
37. Who has the most power?
work done (J)
Power (W) =
1 Watt = 1J in 1s time (s)
3600N
Crane = 36,000J = 600W
60s
300kg
Man = 3000J = 600W
5s
60s 10m
500N
100kg
6m
5s
http://www.clker.com/clipart-man-push.html
38. Quick Quiz:
1. Define energy – what is its unit?
1. Define work – what is its unit?
1. Define power – what is its unit?
1. Name and describe as many forms of energy as you can.
39. What do you think?
Running 1km is harder, so is
more work than walking.
They are both the same
amount of work.
Walking takes longer, so is
more work.
Clipart people from: http://www.clker.com/
40. Elastic Bands & Bouncy Balls
Investigate one factor which my affect the motion of an elastic band or bouncy ball.
Resources here: http://goo.gl/XYYB9
“How does ________
affect ______?”
Elastic band finger gun from http://www.the-rubber-band.com/hand_shooting.php Bouncy ball: http://goo.gl/B3rYW
41. Balloon rockets
What forms of energy are evident when:
• The balloon is inflated?
• The balloon is let go?
• The balloon has stopped (feel it)?
thermal
electrical elastic
____ potential
kinetic mechanical
nuclear magnetic radiant
sound luminous
Review:
• Free body diagram for the balloon.
• Free body diagram for the straw.
• Reaction force pair for the movement.
http://www.education.com/science-fair/article/volume-air-far-balloon-rocket-travels/
42. Balloon rockets
What forms of energy are evident when:
• The balloon is inflated? elastic potential
• The balloon is let go? kinetic sound elastic
• The balloon has stopped (feel it)? thermal
Calculate the work done by the balloon.
Assume a mean force of 0.5N
Calculate the power of the balloon.
http://www.education.com/science-fair/article/volume-air-far-balloon-rocket-travels/
43. Balloon rockets: Blog Post
Assessed for Criteria C, B and F. Work in teams to run the rockets and make the videos, but
complete you own work on the blog post. This is in place of a unit test.
Instructions and task-specific clarifications: http://goo.gl/D9lLO
Quick notes on annotating YouTube videos: http://goo.gl/azNRc
44. is the ratio of useful work out from the total
Efficiency amount of work done, as a percentage.*
Useful work out (J)
Efficiency (%) = x 100
Total work done (J)
How is efficiency affected by energy transfers
and transformations in the system?
How can efficiency of a machine or system be
maximised?
*http://www.a-levelphysicstutor.com/m-kinetics-power-efficiency.php
45. What do you think?
Ideas based on
Concept Cartoons:
http://www.conceptcartoons.com
Clipart people from: http://www.clker.com/search/krug/1