Energy is a serious resource parameter in Wireless Sensor Networks. Utilizing energy in an effectual manner is a challenging task in Wireless Sensor Networks. This paper presents an overview on various energy efficient routing protocols which fulfills the criteria of QoS parameters. Various energy effective and QoS based routing protocols have been compared. To improve the QoS in a network, data fusion and data accumulation is considered to be one of major energy saving technique. The routing protocols based on data aggregation, reduced cost routing and secure routing are also discussed in detail. Simulation tools like NS2, NS3, OMNET etc can be used to evaluate the network performance.
Wireless sensor network is the combination of sensor nodes where sensor nodes are distributed all over the network. There are some challenges that come into the wireless sensor network n context to energy efficiency, network lifetime, storage and battery backup. The most important feature of a routing protocol, in order to be efficient for WSNs, is the energy consumption and the extension of the network’s lifetime. In this paper, we have analyzed various routing techniques for WSN that increases the network lifetime and energy consumption.
A Novel Weighted Clustering Based Approach for Improving the Wireless Sensor ...IJERA Editor
Great lifetime and reliability is the key aim of Wireless Sensor Network (WSN) design. As for prolonging
lifetime of this type of network, energy is the most important resource; all recent researches are focused on more
and more energy efficient techniques. Proposed work is Weighted Clustering Approach based on Weighted
Cluster Head Selection, which is highly energy efficient and reliable in mobile network scenario. Weight
calculation using different attributes of the nodes like SNR (Signal to Noise Ratio), Remaining Energy, Node
Degree, Mobility, and Buffer Length gives efficient Cluster Head (CH) on regular interval of time. CH rotation
helps in optimum utilization of energy available with all nodes; results in prolonged network lifetime.
Implementation is done using the NS2 network simulator and performance evaluation is carried out in terms of
PDR (Packet Delivery Ratio), End to End Delay, Throughput, and Energy Consumption. Demonstration of the
obtained results shows that proposed work is adaptable for improving the performance. In order to justify the
solution, the performance of proposed technique is compared with the performance of traditional approach. The
performance of proposed technique is found optimum as compared to the traditional techniques.
Energy efficient routing in wireless sensor network based on mobile sink guid...IJECEIAES
In wireless sensor networks (WSNs), the minimization of usage of energy in the sensor nodes is a key task. Three salient functions are performed by WSNs’ sensor nodes namely data sensing, transmitting and relaying. Routing technique is one of the methods to enhance the sensor nodes battery lifetime. Energy optimization is done by using one of the heuristic routing methods for data sensing and transmission. To enhance the energy optimization mainly concentrated on data relaying. In this work stochastic hill climbing is adapted. The proposed solution for data relaying utilizes geographical routing and mobile sink technique. The sink collects the data from cluster heads and movement of the sink is routed by stochastic hill climbing. Experimentation is done on the network simulator 2 Platform. The existing routing techniques like threshold sensitive energy efficient sensor network, energy-efficient low duty cycle, and adaptive clustering protocol are compared with the obtained results of chosen algorithm. The proposed work shows promising results with respect to lifetime, average energy of nodes and packet delivery ratio.
CONTEXT-AWARE ENERGY CONSERVING ROUTING ALGORITHM FOR INTERNET OF THINGSIJCNCJournal
Internet of Things (IoT) is the fast- growing technology, mostly used in smart mobile devices such as notebooks, tablets, personal digital assistants (PDA), smartphones, etc. Due to its dynamic nature and the limited battery power of the IoT enabled smart mobile nodes, the communication links between intermediate relay nodes may fail frequently, thus affecting the routing performance of the network and also the availability of the nodes. Existing algorithm does not concentrate about communication links and battery power/energy, but these node links are a very important factor for improving the quality of routing in IoT. In this paper, Context-aware Energy Conserving Algorithm for routing (CECA) was proposed which employs QoS routing metrics like Inter-Meeting Time and residual energy and has been applied to IoT enabled smart mobile devices using different technologies with different microcontroller which resulted in an increased network lifetime, throughput and reduced control overhead and the end to end delay. Simulation results show that, with respect to the speed of the mobile nodes from 2 to 10m/s, CECA increases the network lifetime, thereby increasing the average residual energy by 11.1% and increasing throughput there by reduces the average end to end delay by 14.1% over the Energy-Efficient Probabilistic Routing (EEPR) algorithm. With respect to the number of nodes increases from 10 to 100 nodes, CECA algorithms increase the average residual energy by16.1 % reduces the average end to end delay by 15.9% and control overhead by 23.7% over the existing EEPR
Load Balancing for Achieving the Network Lifetime in WSN-A SurveyAM Publications
a wireless sensor network is network form of sense compute, and communication elements which helps to
observe, events in a specified environment. Sensor nodes in wireless sensor network are depends on battery power they
have limited transmission range that’s why energy efficiency plays a vital role to minimize the overhead through which
the Network Lifetime can be achieved. The lifetime of network, depends on number of nodes, strength, range of area
and connectivity of nodes in the network. In this paper we are over viewing techniques which are used in wireless sensor
network for load balancing. Wireless sensor network having different nodes with different kind of energy which can be
improve the lifetime of the network and its dependability. This paper will provide the person who reads with the
groundwork for research in load balancing techniques for wireless sensor networks.
Wireless sensor network is the combination of sensor nodes where sensor nodes are distributed all over the network. There are some challenges that come into the wireless sensor network n context to energy efficiency, network lifetime, storage and battery backup. The most important feature of a routing protocol, in order to be efficient for WSNs, is the energy consumption and the extension of the network’s lifetime. In this paper, we have analyzed various routing techniques for WSN that increases the network lifetime and energy consumption.
A Novel Weighted Clustering Based Approach for Improving the Wireless Sensor ...IJERA Editor
Great lifetime and reliability is the key aim of Wireless Sensor Network (WSN) design. As for prolonging
lifetime of this type of network, energy is the most important resource; all recent researches are focused on more
and more energy efficient techniques. Proposed work is Weighted Clustering Approach based on Weighted
Cluster Head Selection, which is highly energy efficient and reliable in mobile network scenario. Weight
calculation using different attributes of the nodes like SNR (Signal to Noise Ratio), Remaining Energy, Node
Degree, Mobility, and Buffer Length gives efficient Cluster Head (CH) on regular interval of time. CH rotation
helps in optimum utilization of energy available with all nodes; results in prolonged network lifetime.
Implementation is done using the NS2 network simulator and performance evaluation is carried out in terms of
PDR (Packet Delivery Ratio), End to End Delay, Throughput, and Energy Consumption. Demonstration of the
obtained results shows that proposed work is adaptable for improving the performance. In order to justify the
solution, the performance of proposed technique is compared with the performance of traditional approach. The
performance of proposed technique is found optimum as compared to the traditional techniques.
Energy efficient routing in wireless sensor network based on mobile sink guid...IJECEIAES
In wireless sensor networks (WSNs), the minimization of usage of energy in the sensor nodes is a key task. Three salient functions are performed by WSNs’ sensor nodes namely data sensing, transmitting and relaying. Routing technique is one of the methods to enhance the sensor nodes battery lifetime. Energy optimization is done by using one of the heuristic routing methods for data sensing and transmission. To enhance the energy optimization mainly concentrated on data relaying. In this work stochastic hill climbing is adapted. The proposed solution for data relaying utilizes geographical routing and mobile sink technique. The sink collects the data from cluster heads and movement of the sink is routed by stochastic hill climbing. Experimentation is done on the network simulator 2 Platform. The existing routing techniques like threshold sensitive energy efficient sensor network, energy-efficient low duty cycle, and adaptive clustering protocol are compared with the obtained results of chosen algorithm. The proposed work shows promising results with respect to lifetime, average energy of nodes and packet delivery ratio.
CONTEXT-AWARE ENERGY CONSERVING ROUTING ALGORITHM FOR INTERNET OF THINGSIJCNCJournal
Internet of Things (IoT) is the fast- growing technology, mostly used in smart mobile devices such as notebooks, tablets, personal digital assistants (PDA), smartphones, etc. Due to its dynamic nature and the limited battery power of the IoT enabled smart mobile nodes, the communication links between intermediate relay nodes may fail frequently, thus affecting the routing performance of the network and also the availability of the nodes. Existing algorithm does not concentrate about communication links and battery power/energy, but these node links are a very important factor for improving the quality of routing in IoT. In this paper, Context-aware Energy Conserving Algorithm for routing (CECA) was proposed which employs QoS routing metrics like Inter-Meeting Time and residual energy and has been applied to IoT enabled smart mobile devices using different technologies with different microcontroller which resulted in an increased network lifetime, throughput and reduced control overhead and the end to end delay. Simulation results show that, with respect to the speed of the mobile nodes from 2 to 10m/s, CECA increases the network lifetime, thereby increasing the average residual energy by 11.1% and increasing throughput there by reduces the average end to end delay by 14.1% over the Energy-Efficient Probabilistic Routing (EEPR) algorithm. With respect to the number of nodes increases from 10 to 100 nodes, CECA algorithms increase the average residual energy by16.1 % reduces the average end to end delay by 15.9% and control overhead by 23.7% over the existing EEPR
Load Balancing for Achieving the Network Lifetime in WSN-A SurveyAM Publications
a wireless sensor network is network form of sense compute, and communication elements which helps to
observe, events in a specified environment. Sensor nodes in wireless sensor network are depends on battery power they
have limited transmission range that’s why energy efficiency plays a vital role to minimize the overhead through which
the Network Lifetime can be achieved. The lifetime of network, depends on number of nodes, strength, range of area
and connectivity of nodes in the network. In this paper we are over viewing techniques which are used in wireless sensor
network for load balancing. Wireless sensor network having different nodes with different kind of energy which can be
improve the lifetime of the network and its dependability. This paper will provide the person who reads with the
groundwork for research in load balancing techniques for wireless sensor networks.
A New Method for Reducing Energy Consumption in Wireless Sensor Networks usin...Editor IJCATR
Nowadays, wireless sensor networks, clustering protocol based on the neighboring nodes into separate clusters and fault
tolerance for each cluster exists for sensors to send information to the base station, to gain the best performance in terms of increased
longevity and maintain tolerance than with other routing methods. However, most clustering protocols proposed so far, only
geographical proximity (neighboring) cluster formation is considered as a parameter. In this study, a new clustering protocol and fault
tolerance based on the fuzzy algorithms are able to clustering nodes in sensor networks based on fuzzy logic and fault tolerance. This
protocol uses clustering sensor nodes and fault tolerance exist in the network to reduce energy consumption, so that faulty sensors
from neighboring nodes are used to cover the errors, work based on the most criteria overlay neighbor sensors with defective sensors,
distance neighbor sensors from fault sensor and distance neighbor sensors from central station is done. Superior performance of the
protocol can be seen in terms of increasing the network lifetime and maintain the best network tolerance in comparison with previous
protocols such as LEACH in the simulation results.
EFFECT OF DUTY CYCLE ON ENERGY CONSUMPTION IN WIRELESS SENSOR NETWORKSIJCNC
Most studies define a common duty cycle value throughout the wireless sensor networks (WSNs) to
achieve synchronization among the nodes. On the other hand, a few studies proposed adaptation of the
duty cycle according to uniform traffic conditions to decrease the energy consumption and latency. In
this paper, the lifetime of the nodes based on overall energy consumption are estimated and the effect of
duty cycle on expected energy consumption is studied. The proposed scheme is compared with a standard
scheme and is shown to perform significantly better for sufficient node density.
Approach to minimizing consumption of energy in wireless sensor networks IJECEIAES
The Wireless Sensor Networks (WSN) technology has benefited from a central position in the research space of future emerging networks by its diversity of applications fields and also by its optimization techniques of its various constraints, more essentially, the minimization of nodal energy consumption to increase the global network lifetime. To answer this saving energy problem, several solutions have been proposed at the protocol stack level of the WSN. In this paper, after presenting a state of the art of this technology and its conservation energy techniques at the protocol stack level, we were interested in the network layer to propose a routing solution based on a localization aspect that allows the creation of a virtual grid on the coverage area and introduces it to the two most well-known energy efficiency hierarchical routing protocols, LEACH and PEGASIS. This allowed us to minimize the energy consumption and to select the clusters heads in a deterministic way unlike LEACH which is done in a probabilistic way and also to minimize the latency in PEGASIS, by decomposing its chain into several independent chains. The simulation results, under "MATLABR2015b", have shown the efficiency of our approach in terms of overall residual energy and network lifetime.
Neural computing is now one of the most promising technologies in all fields of engineering,
resulting in the development of a number of Artificial Neural Networks (ANN). Double circuit transmission lines
are being employed in the distribution of power to consumers and have become more widespread than single
transmission line, as they increase the electric power transmission capacity and the reliability of an electrical
system. Losses along transmission lines occur due to faults. Possible faults on the transmission line were
predicted using Artificial Neutral Network. In this work, the simulation of fault on a 132kV double circuit
transmission lines using MATLAB was undertaken. Parameters considered during the simulation were the input
of the network which is the fault current value at each fault location while the output of the network is the fault
location. The efficiency of the neural network was tested and verified. This approach provided satisfactory
results with accuracy of 95% or higher.
LOAD BALANCING AND ENERGY EFFICIENCY IN WSN BY CLUSTER JOINING METHODIAEME Publication
In any WSN life of network is depending on life of sensor node. Thus, proper load balancing is very useful for improving life of network. The tree-based routing protocols like GSTEB used dynamic tree structures for routing without any formation of collections. In cases of larger networks, the scheme is not always feasible. In this proposed work cluster-based routing method is used. Cluster head is selected such that it should be close to the base station and should have maximum residential energy than other nodes selected for cluster formation. Size of cluster is controlled by using location-based cluster joining method such that nodes selects their nearest collection head based on the signal strength from cluster head and distance between node and cluster head. Nodes connect to head having the highest signal strength and closest to the base station, this minimizes size of cluster and reduces extra energy consumption. In addition to this cluster formation process starts only after availability of data due to an event. So proposed protocol performs better than existing tree based protocols like GSTEB in terms of energy efficiency
Energy efficient clustering and routing optimization model for maximizing lif...IJECEIAES
Recently, the wide adoption of WSNs (Wireless-Sensor-Networks) is been seen for provision non-real time and real-time application services such as intelligent transportation and health care monitoring, intelligent transportation etc. Provisioning these services requires energy-efficient WSN. The clustering technique is an efficient mechanism that plays a main role in reducing the energy consumption of WSN. However, the existing model is designed considering reducing energy- consumption of the sensor-device for the homogenous network. However, it incurs energy-overhead (EO) between cluster-head (CH). Further, maximizing coverage time is not considered by the existing clustering approach considering heterogeneous networks affecting lifetime performance. In order to overcome these research challenges, this work presents an energy efficient clustering and routing optimization (EECRO) model adopting cross-layer design for heterogeneous networks. The EECRO uses channel gain information from the physical layer and TDMA based communication is adopted for communication among both intra-cluster and inter-cluster communication. Further, clustering and routing optimization are presented to bring a good trade-off among minimizing the energy of CH, enhancing coverage time and maximizing the lifetime of sensor-network (SN). The experiments are conducted to estimate the performance of EECRO over the existing model. The significantperformance is attained by EECRO over the existing model in terms of minimizing routing and communication overhead and maximizing the lifetime of WSNs.
Design and implementation of grid based clustering in WSN using dynamic sink ...journalBEEI
A wireless sensor networks (WSNs) play a significant application, especially in the monitored remoting environmental, which enables by the availability of sensors which are cheaper, smaller, and intelligent. The equipment of such sensors be with wireless interfaces, which a communication with other sensors occurs for creating a network, that contains many distributed nodes. The closest nodes to the sink are exploited at an enormous traffic load while the data from the whole regions are forwarded between them to reach the sink. This result in exhausting their energy quickly and partitioning the network. This is solved by changing the sink node position in Grid based clustering technique, which considers the optimal method for this purpose. A simulation with MATLAB can be applied for grid based clustering technique to evaluate the performance of WSN. The expected results deal with outperforms in throughput, reducing energy consumption and increasing residual energy, in addition to prolong the network lifetime of the sensor network.
A Review Paper on Power Consumption Improvements in WSNIJERA Editor
Wireless Sensor network (WSN) is a network of low-cost, low-power, multifunctional, small
size sensor nodes which are densely deployed inside a physical environment to collect, process and transmit the
information to sink node. As Sensor nodes are generally battery-powered, it is necessary to balance between
power consumption and energy storage capacity to sustain sensor node's operational life. Therefore one of the
important challenge in WSN is to improve power consumption efficiently to prolong network lifetime by
minimizing the amount of data transmissions throughout the network and maximizing node's low power
residence time. In this paper, two energy optimization techniques, Cluster-Based energy efficient routing
(CBER) scheme and extension to IEEE 802.15.4 standard by dynamic rate adaption and control for energy
reduction (DRACER) protocol for wireless sensor networks has been reviewed. CBER technique increases
network lifetime by reducing Hot Spot problem and end-to-end energy consumption using multi-hop wireless
routing whereas DRACER protocol reduces network latency and average power consumption by minimizing
network overhead using automatic data rate selection process. So, both of these techniques, if utilized in
combination, it is possible to achieve very high energy efficiency in WSN
Cluster Head Selection Techniques for Energy Efficient Wireless Sensor Networ...ijsrd.com
Wireless sensor networks are widely considered as one of the most important technologies. The Wireless Sensor Network (WSN) is a wireless network consisting of ten to thousand small nodes with sensing, computing and wireless communication capabilities. They have been applied to numerous fields such as healthcare, monitoring system, military, and so forth. Recent advances in wireless sensor networks have led to many new protocols specifically designed for sensor networks where energy awareness is an essential consideration. Energy efficiency is thus a primary issue in maintaining the network. Innovative techniques that improve energy efficiency to prolong the network lifetime are highly required. Clustering is an effective topology control approach in wireless sensor networks. This paper elaborates several techniques like LEACH, HEED, LEACH-B, PEACH, EEUC of cluster head selection for energy efficient in wireless sensor networks.
A LOW-ENERGY DATA AGGREGATION PROTOCOL USING AN EMERGENCY EFFICIENT HYBRID ME...IJCNCJournal
Recent wireless sensor network focused on developing communication networks with minimal power and cost. To achieve this, several techniques have been developed to monitor a completely wireless sensor network. Generally, in the WSN network, communication is established between the source nodes and the destination node with an abundant number of hops, an activity which consumes much energy. The node existing between source and destination nodes consumes energy for transmission of data and maximize network lifetime. To overcome this issue, a new Emergency Efficient Hybrid Medium Access Control (EEHMAC) protocol is presented to reduce consumption of energy among a specific group of WSNs which will increase the network lifetime. The proposed model makes a residual battery is utilized for effective transmission of data with minimal power consumption. Compared with other models, the experimental results strongly showed that our model is not only able to reduce network lifetime but also to increase the overall network performance.
Sierpinski carpet fractal monopole antenna for ultra-wideband applications IJECEIAES
Microstrip antenna is broadly used in the modern communication system due to its significant features such as light weight, inexpensive, low profile, and ease of integration with radio frequency devices. The fractal shape is applied in antenna geometry to obtain the ultra-wideband antennas. In this paper, the sierpinski carpet fractal monopole antenna (SCFMA) is developed for base case, first iteration and second iteration to obtain the wideband based on its space filling and self-similar characteristics. The dimension of the monopole patch size is optimized to minimize the overall dimension of the fractal antenna. Moreover, the optimized planar structure is proposed using the microstrip line feed. The monopole antenna is mounted on the FR4 substrate with the thickness of 1.6 mm with loss tangent of 0.02 and relative permittivity of 4.4. The performance of this SCFMA is analyzed in terms of area, bandwidth, return loss, voltage standing wave ratio, radiation pattern and gain. The proposed fractal antenna achieves three different bandwidth ranges such as 2.6-4.0 GHz, 2.5-4.3 GHz and 2.4-4.4 GHz for base case, first and second iteration respectively. The proposed SCFMA is compared with existing fractal antennas to prove the efficiency of the SCFMA design. The area of the SCFMA is 25×20 푚푚 2 , which is less when compared to the existing fractal antennas.
Qos group based optimal retransmission medium access protocol for wireless se...IJCNCJournal
This paper presents, a Group Based Optimal Retransmission Medium Access (GORMA) Protocol is
designed that combines protocol of Collision Avoidance (CA) and energy management for low-cost, shortrange,
low-data rate and low-energy sensor nodes applications in environment monitoring, agriculture,
industrial plants etc. In this paper, the GORMA protocol focuses on efficient MAC protocol to provide
autonomous Quality of Service (QoS) to the sensor nodes in one-hop QoS retransmission group and two
QoS groups in WSNs where the source nodes do not have receiver circuits. Hence, they can only transmit
data to a sink node, but cannot receive any control signals from the sink node. The proposed protocol
GORMA provides QoS to the nodes which work independently on predefined time by allowing them to
transmit each packet an optimal number of times within a given period. Our simulation results shows that
the performance of GORMA protocol, which maximize the delivery probability of one-hop QoS group and
two QoS groups and minimize the energy consumption.
A Review of Sensor Node in Wireless Sensor Networksijtsrd
Wireless Sensor Networks WSNs are collection of tiny sensor nodes capable of sensing, processing and broadcasting data correlated to some occurrence in the network area. The sensor nodes have severe limitation, such as bandwidth, short communication range, limited CPU processing facility, memory and energy. Enhancing the lifetime of wireless sensors network and efficient utilizations of bandwidth are essential for the proliferation of wireless sensor network in different applications. We provide an in depth study of applying wireless sensor networks WSNs to real world habitat monitoring. A set of system design requirements were developed that cover the hardware design of the nodes, the sensor network software, protective enclosures, and system architecture to meet the requirements of biologists. Although researchers anticipate some challenges arising in real world deployments of WSNs, many problems can only be discovered through experience. We present a set of experiences from a four month long deployment on a remote island. We analyze the environmental and node health data to evaluate system performance. The close integration of WSNs with their environment provides environmental data at densities previously impossible. We show that the sensor data is also useful for predicting system operation and network failures. Based on over one million data readings, we analyze the node and network design and develop network reliability profiles and failure models. Jobanputra Paresh Ashokkumar | Prof. Arun Jhapate ""A Review of Sensor Node in Wireless Sensor Networks"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23620.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23620/a-review-of-sensor-node-in-wireless-sensor-networks/jobanputra-paresh-ashokkumar
E FFICIENT E NERGY U TILIZATION P ATH A LGORITHM I N W IRELESS S ENSOR...IJCI JOURNAL
With limited amount of energy, nodes are powered by
batteries in wireless networks. Increasing the lif
e
span of the network and reducing the usage of energ
y are two severe problems in Wireless Sensor
Networks. A small number of energy utilization path
algorithms like minimum spanning tree reduces tota
l
energy consumption of a Wireless Sensor Network, ho
wever very heavy load of sending data packets on
many key nodes is used with the intention that the
nodes quickly consumes battery energy, by raising t
he
life span of the network reduced. Our proposal work
aimed on presenting an Energy Conserved Fast and
Secure Data Aggregation Scheme for WSN in time and
security logic occurrence data collection
application. To begin with, initially the goal is m
ade on energy preservation of sensed data gathering
from
event identified sensor nodes to destination. Inven
tion is finished on Energy Efficient Utilization Pa
th
Algorithm (EEUPA), to extend the lifespan by proces
sing the collecting series with path mediators
depending on gene characteristics sequencing of nod
e energy drain rate, energy consumption rate, and
message overhead together with extended network lif
e span. Additionally, a mathematical programming
technique is designed to improve the lifespan of th
e network. Simulation experiments carried out among
different relating conditions of wireless sensor ne
twork by different path algorithms to analyze the
efficiency and effectiveness of planned Efficient E
nergy Utilization Path Algorithm in wireless sensor
network (EEUPA)
Energy Proficient and Security Protocol for WSN: A Reviewtheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
LOAD BALANCING AND ENERGY EFFICIENCY IN WSN BY CLUSTER JOINING METHODIAEME Publication
In any WSN life of network is depending on life of sensor node. Thus, proper load balancing is very useful for improving life of network. The tree-based routing protocols like GSTEB used dynamic tree structures for routing without any formation of collections. In cases of larger networks, the scheme is not always feasible. In this proposed work cluster-based routing method is used. Cluster head is selected such that it should be close to the base station and should have maximum residential energy than other nodes selected for cluster formation. Size of cluster is controlled by using location-based cluster joining method such that nodes selects their nearest collection head based on the signal strength from cluster head and distance between node and cluster head. Nodes connect to head having the highest signal strength and closest to the base station, this minimizes size of cluster and reduces extra energy consumption. In addition to this cluster formation process starts only after availability of data due to an event. So proposed protocol performs better than existing tree based protocols like GSTEB in terms of energy efficiency
Optimized Projected Strategy for Enhancement of WSN Using Genetic AlgorithmsIJMER
This paper put forward a new strategy for selecting the most favorable cluster head in Stable
Election Protocol (SEP). The planned approach selects a node as cluster head if it has the maximum
energy among all the available nodes in that particular cluster. It considers diverse nodes and divides
nodes among normal, transitional and advance nodes. To handle the heterogeneity of the nodes, different
optimized probability density functions are selected. First node dead time explain the network stability
period and last node dead explain the overall network lifetime. The main pressure is to increase the time
when first node dies and also when last node dies. The projected strategy is designed and implemented in
the Matlab using mathematics toolbox. The projected algorithm is also compared with the some prominent
protocols like leach, E-LEACH, SEP and extended SEP
A New Method for Reducing Energy Consumption in Wireless Sensor Networks usin...Editor IJCATR
Nowadays, wireless sensor networks, clustering protocol based on the neighboring nodes into separate clusters and fault
tolerance for each cluster exists for sensors to send information to the base station, to gain the best performance in terms of increased
longevity and maintain tolerance than with other routing methods. However, most clustering protocols proposed so far, only
geographical proximity (neighboring) cluster formation is considered as a parameter. In this study, a new clustering protocol and fault
tolerance based on the fuzzy algorithms are able to clustering nodes in sensor networks based on fuzzy logic and fault tolerance. This
protocol uses clustering sensor nodes and fault tolerance exist in the network to reduce energy consumption, so that faulty sensors
from neighboring nodes are used to cover the errors, work based on the most criteria overlay neighbor sensors with defective sensors,
distance neighbor sensors from fault sensor and distance neighbor sensors from central station is done. Superior performance of the
protocol can be seen in terms of increasing the network lifetime and maintain the best network tolerance in comparison with previous
protocols such as LEACH in the simulation results.
EFFECT OF DUTY CYCLE ON ENERGY CONSUMPTION IN WIRELESS SENSOR NETWORKSIJCNC
Most studies define a common duty cycle value throughout the wireless sensor networks (WSNs) to
achieve synchronization among the nodes. On the other hand, a few studies proposed adaptation of the
duty cycle according to uniform traffic conditions to decrease the energy consumption and latency. In
this paper, the lifetime of the nodes based on overall energy consumption are estimated and the effect of
duty cycle on expected energy consumption is studied. The proposed scheme is compared with a standard
scheme and is shown to perform significantly better for sufficient node density.
Approach to minimizing consumption of energy in wireless sensor networks IJECEIAES
The Wireless Sensor Networks (WSN) technology has benefited from a central position in the research space of future emerging networks by its diversity of applications fields and also by its optimization techniques of its various constraints, more essentially, the minimization of nodal energy consumption to increase the global network lifetime. To answer this saving energy problem, several solutions have been proposed at the protocol stack level of the WSN. In this paper, after presenting a state of the art of this technology and its conservation energy techniques at the protocol stack level, we were interested in the network layer to propose a routing solution based on a localization aspect that allows the creation of a virtual grid on the coverage area and introduces it to the two most well-known energy efficiency hierarchical routing protocols, LEACH and PEGASIS. This allowed us to minimize the energy consumption and to select the clusters heads in a deterministic way unlike LEACH which is done in a probabilistic way and also to minimize the latency in PEGASIS, by decomposing its chain into several independent chains. The simulation results, under "MATLABR2015b", have shown the efficiency of our approach in terms of overall residual energy and network lifetime.
Neural computing is now one of the most promising technologies in all fields of engineering,
resulting in the development of a number of Artificial Neural Networks (ANN). Double circuit transmission lines
are being employed in the distribution of power to consumers and have become more widespread than single
transmission line, as they increase the electric power transmission capacity and the reliability of an electrical
system. Losses along transmission lines occur due to faults. Possible faults on the transmission line were
predicted using Artificial Neutral Network. In this work, the simulation of fault on a 132kV double circuit
transmission lines using MATLAB was undertaken. Parameters considered during the simulation were the input
of the network which is the fault current value at each fault location while the output of the network is the fault
location. The efficiency of the neural network was tested and verified. This approach provided satisfactory
results with accuracy of 95% or higher.
LOAD BALANCING AND ENERGY EFFICIENCY IN WSN BY CLUSTER JOINING METHODIAEME Publication
In any WSN life of network is depending on life of sensor node. Thus, proper load balancing is very useful for improving life of network. The tree-based routing protocols like GSTEB used dynamic tree structures for routing without any formation of collections. In cases of larger networks, the scheme is not always feasible. In this proposed work cluster-based routing method is used. Cluster head is selected such that it should be close to the base station and should have maximum residential energy than other nodes selected for cluster formation. Size of cluster is controlled by using location-based cluster joining method such that nodes selects their nearest collection head based on the signal strength from cluster head and distance between node and cluster head. Nodes connect to head having the highest signal strength and closest to the base station, this minimizes size of cluster and reduces extra energy consumption. In addition to this cluster formation process starts only after availability of data due to an event. So proposed protocol performs better than existing tree based protocols like GSTEB in terms of energy efficiency
Energy efficient clustering and routing optimization model for maximizing lif...IJECEIAES
Recently, the wide adoption of WSNs (Wireless-Sensor-Networks) is been seen for provision non-real time and real-time application services such as intelligent transportation and health care monitoring, intelligent transportation etc. Provisioning these services requires energy-efficient WSN. The clustering technique is an efficient mechanism that plays a main role in reducing the energy consumption of WSN. However, the existing model is designed considering reducing energy- consumption of the sensor-device for the homogenous network. However, it incurs energy-overhead (EO) between cluster-head (CH). Further, maximizing coverage time is not considered by the existing clustering approach considering heterogeneous networks affecting lifetime performance. In order to overcome these research challenges, this work presents an energy efficient clustering and routing optimization (EECRO) model adopting cross-layer design for heterogeneous networks. The EECRO uses channel gain information from the physical layer and TDMA based communication is adopted for communication among both intra-cluster and inter-cluster communication. Further, clustering and routing optimization are presented to bring a good trade-off among minimizing the energy of CH, enhancing coverage time and maximizing the lifetime of sensor-network (SN). The experiments are conducted to estimate the performance of EECRO over the existing model. The significantperformance is attained by EECRO over the existing model in terms of minimizing routing and communication overhead and maximizing the lifetime of WSNs.
Design and implementation of grid based clustering in WSN using dynamic sink ...journalBEEI
A wireless sensor networks (WSNs) play a significant application, especially in the monitored remoting environmental, which enables by the availability of sensors which are cheaper, smaller, and intelligent. The equipment of such sensors be with wireless interfaces, which a communication with other sensors occurs for creating a network, that contains many distributed nodes. The closest nodes to the sink are exploited at an enormous traffic load while the data from the whole regions are forwarded between them to reach the sink. This result in exhausting their energy quickly and partitioning the network. This is solved by changing the sink node position in Grid based clustering technique, which considers the optimal method for this purpose. A simulation with MATLAB can be applied for grid based clustering technique to evaluate the performance of WSN. The expected results deal with outperforms in throughput, reducing energy consumption and increasing residual energy, in addition to prolong the network lifetime of the sensor network.
A Review Paper on Power Consumption Improvements in WSNIJERA Editor
Wireless Sensor network (WSN) is a network of low-cost, low-power, multifunctional, small
size sensor nodes which are densely deployed inside a physical environment to collect, process and transmit the
information to sink node. As Sensor nodes are generally battery-powered, it is necessary to balance between
power consumption and energy storage capacity to sustain sensor node's operational life. Therefore one of the
important challenge in WSN is to improve power consumption efficiently to prolong network lifetime by
minimizing the amount of data transmissions throughout the network and maximizing node's low power
residence time. In this paper, two energy optimization techniques, Cluster-Based energy efficient routing
(CBER) scheme and extension to IEEE 802.15.4 standard by dynamic rate adaption and control for energy
reduction (DRACER) protocol for wireless sensor networks has been reviewed. CBER technique increases
network lifetime by reducing Hot Spot problem and end-to-end energy consumption using multi-hop wireless
routing whereas DRACER protocol reduces network latency and average power consumption by minimizing
network overhead using automatic data rate selection process. So, both of these techniques, if utilized in
combination, it is possible to achieve very high energy efficiency in WSN
Cluster Head Selection Techniques for Energy Efficient Wireless Sensor Networ...ijsrd.com
Wireless sensor networks are widely considered as one of the most important technologies. The Wireless Sensor Network (WSN) is a wireless network consisting of ten to thousand small nodes with sensing, computing and wireless communication capabilities. They have been applied to numerous fields such as healthcare, monitoring system, military, and so forth. Recent advances in wireless sensor networks have led to many new protocols specifically designed for sensor networks where energy awareness is an essential consideration. Energy efficiency is thus a primary issue in maintaining the network. Innovative techniques that improve energy efficiency to prolong the network lifetime are highly required. Clustering is an effective topology control approach in wireless sensor networks. This paper elaborates several techniques like LEACH, HEED, LEACH-B, PEACH, EEUC of cluster head selection for energy efficient in wireless sensor networks.
A LOW-ENERGY DATA AGGREGATION PROTOCOL USING AN EMERGENCY EFFICIENT HYBRID ME...IJCNCJournal
Recent wireless sensor network focused on developing communication networks with minimal power and cost. To achieve this, several techniques have been developed to monitor a completely wireless sensor network. Generally, in the WSN network, communication is established between the source nodes and the destination node with an abundant number of hops, an activity which consumes much energy. The node existing between source and destination nodes consumes energy for transmission of data and maximize network lifetime. To overcome this issue, a new Emergency Efficient Hybrid Medium Access Control (EEHMAC) protocol is presented to reduce consumption of energy among a specific group of WSNs which will increase the network lifetime. The proposed model makes a residual battery is utilized for effective transmission of data with minimal power consumption. Compared with other models, the experimental results strongly showed that our model is not only able to reduce network lifetime but also to increase the overall network performance.
Sierpinski carpet fractal monopole antenna for ultra-wideband applications IJECEIAES
Microstrip antenna is broadly used in the modern communication system due to its significant features such as light weight, inexpensive, low profile, and ease of integration with radio frequency devices. The fractal shape is applied in antenna geometry to obtain the ultra-wideband antennas. In this paper, the sierpinski carpet fractal monopole antenna (SCFMA) is developed for base case, first iteration and second iteration to obtain the wideband based on its space filling and self-similar characteristics. The dimension of the monopole patch size is optimized to minimize the overall dimension of the fractal antenna. Moreover, the optimized planar structure is proposed using the microstrip line feed. The monopole antenna is mounted on the FR4 substrate with the thickness of 1.6 mm with loss tangent of 0.02 and relative permittivity of 4.4. The performance of this SCFMA is analyzed in terms of area, bandwidth, return loss, voltage standing wave ratio, radiation pattern and gain. The proposed fractal antenna achieves three different bandwidth ranges such as 2.6-4.0 GHz, 2.5-4.3 GHz and 2.4-4.4 GHz for base case, first and second iteration respectively. The proposed SCFMA is compared with existing fractal antennas to prove the efficiency of the SCFMA design. The area of the SCFMA is 25×20 푚푚 2 , which is less when compared to the existing fractal antennas.
Qos group based optimal retransmission medium access protocol for wireless se...IJCNCJournal
This paper presents, a Group Based Optimal Retransmission Medium Access (GORMA) Protocol is
designed that combines protocol of Collision Avoidance (CA) and energy management for low-cost, shortrange,
low-data rate and low-energy sensor nodes applications in environment monitoring, agriculture,
industrial plants etc. In this paper, the GORMA protocol focuses on efficient MAC protocol to provide
autonomous Quality of Service (QoS) to the sensor nodes in one-hop QoS retransmission group and two
QoS groups in WSNs where the source nodes do not have receiver circuits. Hence, they can only transmit
data to a sink node, but cannot receive any control signals from the sink node. The proposed protocol
GORMA provides QoS to the nodes which work independently on predefined time by allowing them to
transmit each packet an optimal number of times within a given period. Our simulation results shows that
the performance of GORMA protocol, which maximize the delivery probability of one-hop QoS group and
two QoS groups and minimize the energy consumption.
A Review of Sensor Node in Wireless Sensor Networksijtsrd
Wireless Sensor Networks WSNs are collection of tiny sensor nodes capable of sensing, processing and broadcasting data correlated to some occurrence in the network area. The sensor nodes have severe limitation, such as bandwidth, short communication range, limited CPU processing facility, memory and energy. Enhancing the lifetime of wireless sensors network and efficient utilizations of bandwidth are essential for the proliferation of wireless sensor network in different applications. We provide an in depth study of applying wireless sensor networks WSNs to real world habitat monitoring. A set of system design requirements were developed that cover the hardware design of the nodes, the sensor network software, protective enclosures, and system architecture to meet the requirements of biologists. Although researchers anticipate some challenges arising in real world deployments of WSNs, many problems can only be discovered through experience. We present a set of experiences from a four month long deployment on a remote island. We analyze the environmental and node health data to evaluate system performance. The close integration of WSNs with their environment provides environmental data at densities previously impossible. We show that the sensor data is also useful for predicting system operation and network failures. Based on over one million data readings, we analyze the node and network design and develop network reliability profiles and failure models. Jobanputra Paresh Ashokkumar | Prof. Arun Jhapate ""A Review of Sensor Node in Wireless Sensor Networks"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23620.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23620/a-review-of-sensor-node-in-wireless-sensor-networks/jobanputra-paresh-ashokkumar
E FFICIENT E NERGY U TILIZATION P ATH A LGORITHM I N W IRELESS S ENSOR...IJCI JOURNAL
With limited amount of energy, nodes are powered by
batteries in wireless networks. Increasing the lif
e
span of the network and reducing the usage of energ
y are two severe problems in Wireless Sensor
Networks. A small number of energy utilization path
algorithms like minimum spanning tree reduces tota
l
energy consumption of a Wireless Sensor Network, ho
wever very heavy load of sending data packets on
many key nodes is used with the intention that the
nodes quickly consumes battery energy, by raising t
he
life span of the network reduced. Our proposal work
aimed on presenting an Energy Conserved Fast and
Secure Data Aggregation Scheme for WSN in time and
security logic occurrence data collection
application. To begin with, initially the goal is m
ade on energy preservation of sensed data gathering
from
event identified sensor nodes to destination. Inven
tion is finished on Energy Efficient Utilization Pa
th
Algorithm (EEUPA), to extend the lifespan by proces
sing the collecting series with path mediators
depending on gene characteristics sequencing of nod
e energy drain rate, energy consumption rate, and
message overhead together with extended network lif
e span. Additionally, a mathematical programming
technique is designed to improve the lifespan of th
e network. Simulation experiments carried out among
different relating conditions of wireless sensor ne
twork by different path algorithms to analyze the
efficiency and effectiveness of planned Efficient E
nergy Utilization Path Algorithm in wireless sensor
network (EEUPA)
Energy Proficient and Security Protocol for WSN: A Reviewtheijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
LOAD BALANCING AND ENERGY EFFICIENCY IN WSN BY CLUSTER JOINING METHODIAEME Publication
In any WSN life of network is depending on life of sensor node. Thus, proper load balancing is very useful for improving life of network. The tree-based routing protocols like GSTEB used dynamic tree structures for routing without any formation of collections. In cases of larger networks, the scheme is not always feasible. In this proposed work cluster-based routing method is used. Cluster head is selected such that it should be close to the base station and should have maximum residential energy than other nodes selected for cluster formation. Size of cluster is controlled by using location-based cluster joining method such that nodes selects their nearest collection head based on the signal strength from cluster head and distance between node and cluster head. Nodes connect to head having the highest signal strength and closest to the base station, this minimizes size of cluster and reduces extra energy consumption. In addition to this cluster formation process starts only after availability of data due to an event. So proposed protocol performs better than existing tree based protocols like GSTEB in terms of energy efficiency
Optimized Projected Strategy for Enhancement of WSN Using Genetic AlgorithmsIJMER
This paper put forward a new strategy for selecting the most favorable cluster head in Stable
Election Protocol (SEP). The planned approach selects a node as cluster head if it has the maximum
energy among all the available nodes in that particular cluster. It considers diverse nodes and divides
nodes among normal, transitional and advance nodes. To handle the heterogeneity of the nodes, different
optimized probability density functions are selected. First node dead time explain the network stability
period and last node dead explain the overall network lifetime. The main pressure is to increase the time
when first node dies and also when last node dies. The projected strategy is designed and implemented in
the Matlab using mathematics toolbox. The projected algorithm is also compared with the some prominent
protocols like leach, E-LEACH, SEP and extended SEP
Maximizing Lifetime of Homogeneous Wireless Sensor Network through Energy Eff...CSCJournals
The objective of this paper is to develop a mechanism to increase the lifetime of homogeneous wireless sensor networks (WSNs) through minimizing long range communication, efficient data delivery and energy balancing. Energy efficiency is a very important issue for sensor nodes which affects the lifetime of sensor networks. To achieve energy balancing and maximizing network lifetime we divided the whole network into different clusters. In cluster based architecture, the role of aggregator node is very crucial because of extra processing and long range communication. Once the aggregator node becomes non functional, it affects the whole cluster. We introduced a candidate cluster head node on the basis of node density. We proposed a modified cluster based WSN architecture by introducing a server node (SN) that is rich in terms of resources. This server node (SN) takes the responsibility of transmitting data to the base station over longer distances from the cluster head. We proposed cluster head selection algorithm based on residual energy, distance, reliability and degree of mobility. The proposed method can save overall energy consumption and extend the lifetime of the sensor network and also addresses robustness against even/uneven node deployment.
Routing Optimization with Load Balancing: an Energy Efficient ApproachEswar Publications
The area of Wireless Sensor Network (WSN) is covered with considerable range of problems, where majority of research attempts were carried out to enhance the network lifetime of WSN. But very few of the studies have proved successful. This manuscript discusses about a structure for optimizing routing and load balancing that uses standard radio and energy model to perform energy optimization by introducing a novel routing agent. The routing agent is built within aggregator node and base station to perform self motivated reconfiguration in case of energy depletion. Compared with standard LEACH algorithm, the proposed technique has better energy efficiency within optimal data aggregation duration.
Intrusion Detection and Countermeasure in Virtual Network Systems Using NICE ...IJERA Editor
The cloud computing has increased in many organizations. It provides many benefits in terms of low cost and accessibility of data. Ensuring the security of cloud computing is a major factor in the cloud computing environment, as users often store sensitive information with cloud storage providers but these providers may be untrusted. In this project we propose anIntrusion Detection and Countermeasure in Virtual Network Systems mechanism called NICE to prevent vulnerable virtual machines from being compromised in the cloud. NICE detects and mitigates collaborative attacks in the cloud virtual networking environment. The system performance evaluation demonstrates the feasibility of NICE and shows that the proposed solution can significantly reduce the risk of the cloud system from being exploited and abused by internal and external attackers.
An energy aware scheme for layered chain in underwater wireless sensor networ...IJECEIAES
Extending the network lifetime is a very challenging problem that needs to be taken into account during routing data in wireless sensor networks in general and particularly in underwater wireless sensor networks (UWSN). For this purpose, the present paper proposes a multilayer chain based on genetic algorithm routing (MCGA) for routing data from nodes to the sink. This algorithm consists to create a limited number of local chains constructed by using genetic algorithm in order to obtain the shortest path between nodes; furthermore, a leader node (LN) is elected in each chain followed by constructing a global chain containing LNs. The selection of the LN in the closest chain to the sink is as follows: Initially, the closest node to sink is elected LN in this latter because all nodes have initially the same energy value; then the future selection of the LN is based on the residual energy of the nodes. LNs in the other chains are selected based on the proximity to the previous LNs. Data transmission is performed in two steps: intra-chain transmission and inter-chain transmission. Furthermore, MCGA is simulated for different scenarios of mobility and density of nodes in the networks. The performance evaluation of the proposed technique shows a considerable reduction in terms of energy consumption and network lifespan.
Survey: energy efficient protocols using radio scheduling in wireless sensor ...IJECEIAES
An efficient energy management scheme is crucial factor for design and implementation of any sensor network. Almost all sensor networks are structured with numerous small sized, low cost sensor devices which are scattered over the large area. To improvise the network performance by high throughput with minimum energy consumption, an energy efficient radio scheduling MAC protocol is effective solution, since MAC layer has the capability to collaborate with distributed wireless networks. The present survey study provides relevant research work towards radio scheduling mechanism in the design of energy efficient wireless sensor networks (WSNs). The various radio scheduling protocols are exist in the literature, which has some limitations. Therefore, it is require developing a new energy efficient radio scheduling protocol to perform multi tasks with minimum energy consumption (e.g. data transmission). The most of research studies paying more attention towards to enhance the overall network lifetime with the aim of using energy efficient scheduling protocol. In that context, this survey study overviews the different categories of MAC based radio scheduling protocols and those protocols are measured by evaluating their data transmission capability, energy efficiency, and network performance. With the extensive analysis of existing works, many research challenges are stated. Also provides future directions for new WSN design at the end of this survey.
Energy Efficient Techniques for Data aggregation and collection in WSNIJCSEA Journal
A multidisciplinary research area such as wireless sensor networks (WSN) have been invoked the monitoring of remote physical environment and are used for a wide range of applications ranging from defense personnel to many scientific research, statistical application, disaster area and War Zone. These networks are constraint with energy, memory and computing power enhance efficient techniques are needed for data aggregation, data collection, query processing, decision making and routing in sensor networks. The problem encountered in the recent past was of the more battery power consumption as activity increases, need more efficient data aggregation and collection techniques with right decision making capabilities. Therefore, this paper proposed the efficient and effective architecture and mechanism of energy efficient techniques for data aggregation and collection in WSN using principles like global weight calculation of nodes, data collection for cluster head and data aggregation techniques using data cube aggregation.
Energy-aware strategy for data forwarding in IoT ecosystem IJECEIAES
The Internet of Things (IoT) is looming technology rapidly attracting many industries and drawing research attention. Although the scale of IoT-applications is very large, the capabilities of the IoT-devices are limited, especially in terms of energy. However, various research works have been done to alleviate these shortcomings, but the schemes introduced in the literature are complex and difficult to implement in practical scenarios. Therefore, considering the energy consumption of heterogeneous nodes in IoT eco-system, a simple energy-efficient routing technique is proposed. The proposed system has also employed an SDN controller that acts as a centralized manager to control and monitor network services, there by restricting the access of selfish nodes to the network. The proposed system constructs an analytical algorithm that provides reliable data transmission operations and controls energy consumption using a strategic mechanism where the path selection process is performed based on the remaining energy of adjacent nodes located in the direction of the destination node. The proposed energy-efficient data forwarding mechanism is compared with the existing AODV routing technique. The simulation result demonstrates that the protocol is superior to AODV in terms of packet delivery rate, throughput, and end-to-end delay.
Energy Aware Talented Clustering with Compressive Sensing (TCCS) for Wireless...IJCNCJournal
Wireless sensor networks (WSNs) are networks of sensor nodes that interact wirelessly to gather information about the surrounding environment. Nodes are often low-powered and dispersed in an ad hoc, decentralized manner. Although WSNs have gained in popularity, they still have several serious shortcomings, like limited battery life and bandwidth. In this paper, the cluster head (CH) selection, the Compressive Sensing (CS) theory, the Connection-based Decentralized Clustering (CDC), the relay node selection, and the Multi Objective Genetic Algorithm (MOGA)are all taken into account The initial stage provided a theoretical revision to the concepts of network construction, compressive sensing, and MOGA, which impacted the improvement of network lifetime. In the second stage developed a novel model such as Energy Aware Talented Clustering with Compressive Sensing (TCCS) for the sensor network. This approach considers increasing longevity but also raises the network's overall quality of service (QoS). In the analysis, the TCCS model is applied to both the centralized and distributed networks and compared with the existing methods. When compared to the previous methods, the simulation results show that the proposed work performs better in terms of the calculation of maximum packet delivery ratio of 93.93 percent, minimum energy consumption of 8.04J, maximum energy efficiency of 91.04 percent, maximum network throughput of 465.51kbps, minimum packet loss of 282 packets, and minimum delay of 63.82 msec.
ENERGY AWARE TALENTED CLUSTERING WITH COMPRESSIVE SENSING (TCCS) FOR WIRELESS...IJCNCJournal
Wireless sensor networks (WSNs) are networks of sensor nodes that interact wirelessly to gather
information about the surrounding environment. Nodes are often low-powered and dispersed in an ad hoc,
decentralized manner. Although WSNs have gained in popularity, they still have several serious
shortcomings, like limited battery life and bandwidth. In this paper, the cluster head (CH) selection, the
Compressive Sensing (CS) theory, the Connection-based Decentralized Clustering (CDC), the relay node
selection, and the Multi Objective Genetic Algorithm (MOGA)are all taken into account The initial stage
provided a theoretical revision to the concepts of network construction, compressive sensing, and MOGA,
which impacted the improvement of network lifetime. In the second stage developed a novel model such as
Energy Aware Talented Clustering with Compressive Sensing (TCCS) for the sensor network. This
approach considers increasing longevity but also raises the network's overall quality of service (QoS). In
the analysis, the TCCS model is applied to both the centralized and distributed networks and compared
with the existing methods. When compared to the previous methods, the simulation results show that the
proposed work performs better in terms of the calculation of maximum packet delivery ratio of 93.93
percent, minimum energy consumption of 8.04J, maximum energy efficiency of 91.04 percent, maximum
network throughput of 465.51kbps, minimum packet loss of 282 packets, and minimum delay of 63.82 msec.
Multi Objective Salp Swarm based Energy Efficient Routing Protocol for Hetero...IJCNCJournal
Routing is a persistent concern in wireless sensor networks (WSNs), as getting data from sources to destinations can be a tricky task. Challenges include safeguarding the data being transferred, ensuring network longevity, and preserving energy in harsh environmental conditions. Consequently, this study delves into the suitability of using multi-objective swarm optimization to route heterogeneous WSNs in the hope of mitigating these issues while boosting the speed and accuracy of data transmission. In order to achieve better performance in terms of load balancing and reducing energy expenditure, the MOSSA-BA algorithm was developed. This algorithm combines the Multi-Objective Salp Swarm Algorithm (MOSSA) with the exploiting strategy of the artificial bee colony (BA) in the neighbourhood of Salps. Inspired by the SEP and EDEEC protocols, the integrated solutions of MOSSA-BA were used to route two and three levels of heterogeneous networks. The embedded solutions provided outstanding performance in regards to FND, HND, LND, percentage of remaining energy, and the number of packages delivered to the base station. Compared to SEP, EDEEC, and other competitors based on MOSSA and a modified multi-objective particle swarm optimization (MOPSO), the MOSSA-BA-based protocols demonstrated energy-saving percentages of more than 34% in medium-sized areas of interest and over 22% in large-sized areas of detection.
Multi Objective Salp Swarm based Energy Efficient Routing Protocol for Hetero...IJCNCJournal
Routing is a persistent concern in wireless sensor networks (WSNs), as getting data from sources to destinations can be a tricky task. Challenges include safeguarding the data being transferred, ensuring network longevity, and preserving energy in harsh environmental conditions. Consequently, this study delves into the suitability of using multi-objective swarm optimization to route heterogeneous WSNs in the hope of mitigating these issues while boosting the speed and accuracy of data transmission. In order to achieve better performance in terms of load balancing and reducing energy expenditure, the MOSSA-BA algorithm was developed. This algorithm combines the Multi-Objective Salp Swarm Algorithm (MOSSA) with the exploiting strategy of the artificial bee colony (BA) in the neighbourhood of Salps. Inspired by the SEP and EDEEC protocols, the integrated solutions of MOSSA-BA were used to route two and three levels of heterogeneous networks. The embedded solutions provided outstanding performance in regards to FND, HND, LND, percentage of remaining energy, and the number of packages delivered to the base station. Compared to SEP, EDEEC, and other competitors based on MOSSA and a modified multi-objective particle swarm optimization (MOPSO), the MOSSA-BA-based protocols demonstrated energy-saving percentages of more than 34% in medium-sized areas of interest and over 22% in large-sized areas of detection.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
2. Syed Mohd Ali, Dr Syeda Gauhar Fatima, Syeda Kausar Fatima and Dr Syed Abdul Sattar
http://www.iaeme.com/IJEET/index.asp 98 editor@iaeme.com
can perform some particular action and are battery powered. Compared to other wireless
networks, the number of nodes and density of nodes comprising WSNs is huge. Due to recent
technological improvements, sensor nodes have become small, inexpensive, low-power and
distributed. Sensor networks have been useful in many fields like military, health, monitoring
environment, industry, Science, transportation, civil infrastructure, habitat monitoring and
security. While communicating the collected information, energy conservation is a key issue
that has to be taken into consideration. The network is also concerned with providing the
required QoS. Due to the resource constrains of wireless sensor nodes, great challenge has been
placed on properties such as delay, reliability, fault tolerance and coverage. Data fusion and
data accumulation should be done in order to save energy in Wireless Sensor Networks. The
communication between the sensor and the base station takes place through transitional nodes
which drains more energy to transmit sensed data over long distance. Many techniques have
been advanced to reduce the energy consumption in these intermediate nodes. Aggregator node
is one such node which can reduce the energy consumption in these transitional nodes. This
process is stated as data aggregation [1-5].
1.2. Motivation
In WSNs, while communicating the collected information the network is concerned with
providing the required QoS. QoS is the measure of service quality that the network offers to the
end user or application. For efficient and consistent transmission of communication of the
sensed data from the sensor field to the sink node, the network has to fulfil the required QoS.
Few of the QoS parameters include data precision, accumulation delay, fault tolerance,
optimum number of active sensors, coverage, energy efficiency, responsiveness, reliability,
timeliness, robustness Self-Configuration Privacy and Security. QoS is also determined by
calculating the throughput, delay, jitter and packet loss rate of the network. As wireless sensors
carry severe energy and computational resource constrains QoS support has been challenging
task in Wireless Sensor Networks [6]. An energy limitation is one of the main issue in Wireless
Sensor Networks since the nodes are energized by battery power. Hence, it is essential to design
an energy-aware system to ensure the durability of surveillance missions and many mechanism
have been proposed recently [7-8].
2. LITERATURE SURVEY
Chu-Fu Wang et al., [9] proposes a network lifetime enhancement method for sink
rearrangement and its study in Wireless Sensor Networks. He describes the method to conserve
network lifetime while executing the sensing and reporting task. He proposed energy-aware
sink relocation (EASR) methods for mobile sinks in WSNs. This method of sink rearrangement
was an effective one in increasing the network lifetime by avoiding the battery energy
consumption. This sink rearrangement method requires mathematical survey and effective
routing protocols. Özgür B. Akan et al., [10] proposes Event-toSink Reliable Transport in
Wireless Sensor Networks. He designed reliable event detection using minimum energy usage.
This Event-to-Sink Reliable Transport (ESRT) protocol works by controlling the blocking of
the network. Multiple event occurrences is accommodated in Wireless Sensor Networks. Here,
the main function is run on sink and least functionality is shown at the source end. Hui Wang
et al., [11] describes Network Lifetime Optimization in Wireless Sensor Networks. In this
protocol, design of physical, medium access control and routing layers are done in such a way
that their network lifetime can be increased. An iterative algorithm is also proposed for large
planar networks. Here, to address the delinquent of network lifespan Time Division Multiple
Admittance technique is adopted. Kareesh –Kuhn-Tucker (KKT) conditions also provide
network lifetime expansion for cross layer network design. A unique algorithm has to be
designed which can upsurge the network lifetime for both small and large planar networks.
3. Energy Efficient Routing in Wireless Sensor Networks Based on QOS
http://www.iaeme.com/IJEET/index.asp 99 editor@iaeme.com
Hamid Rafiei Karkvandi et al., [12] presents Effective Lifetime-Aware Routing in Wireless
Sensor Networks. This method determines the network resource stipulations such as the number
of available nodes and their sensing spatial coverage. Here, the novel sensing problem is
addressed and examined for various layers of the network. By using the results of various linear
programming equations, normalized network lifetime can be calculated for various network
environments. Jae-Wan Kim [13] describes an Intelligent Agent-based Routing Structure for
Mobile Sinks in WSNs. As common moving sinks demand for frequent location inform, much
of the energy consumption is due to these frequently moving and updating sink nodes. It works
on data assembly and selection of efficient path techniques. This scheme shows outstanding
presentation when considering a mobile sink. The proposed algorithm reduces the packet loss
and signal overhead in the data communication. Distance comparison is done and new path is
selected if original path is considered to consume more power. This scheme demands for fast
and precise path selection technique.
Demin Wang et al., [14] describes Coverage and Lifetime Optimization of Wireless Sensor
Networks using Gaussian Distribution. Coverage and lifetime are directly associated with
battery power of the network. The sensors employed for this communication follow Gaussian
Distribution and different dispersions. By considering various critical model coverage and
lifetime can be increased in Gaussian Distribution. In Gaussian Distribution, energy saving
option is not shown for sleep and wake scheduling. So, Gaussian Distribution is not an efficient
one for multi hop routing protocol. Leandro et al.,[15] proposes DRINA: A Lightweight and
Reliable Routing Approach for In-Network Aggregation in Wireless Sensor Networks which
reduces the energy consumption of various high density nodes. Data fusion and data
accumulation methods can remove the dismissal in the data and can reduce the energy ingesting
and cost. Here, reduced number of messages are used for setting up a routing tree, maximized
number of overlapping routes, high aggregation rate, reliable data aggregation and
transmission. The proposed algorithm includes the Information Fusionbased Role Assignment
(InFRA) and Shortest Path Tree (SPT) algorithms. These algorithm provide good performance
in aggregation of data. Ankit Thakkar et al ., [16] elaborates on Cluster Head Election for
Energy and Delay Constraint Applications of Wireless Sensor Network and proposes collection
formation that results in good performance with respect to energy and interruption constraints
of the network. In this cluster formation, cluster head collects and aggregates the data from
member nodes and send it to the other cluster head or the base station, thus attaining good
scalability. Study of the proposed algorithm was done by considering two distances Euclidean
distance and multi Hop-count distance. Energy consumption was more for Euclidian distance
than the multi hop count distance. The Hop count exhibited higher delay when compared to
Euclidian distance.
3. ROUTING MECHANISMS IN WIRELESS SENSOR NETWORKS
Efficient routing protocol should control the energy consumption of the network and they
should reduce the difficulty of the network. During communication between sensor nodes, these
protocols should reduce the transfer delay occurring at the nodes. In this paper, we have
associated various energy efficient routing protocols by upholding better QoS. If the cost is
associated with the link length of the network, then the shortest path link will be the well-
organized path in communicating the data with reduced cost. The Shortest Path is the distance
from any given node to the terminus node. If there is continuous data communication,
bandwidth may be a limitation in shortest path route. Such shortest path routing networks
should take bandwidth issue as major consideration, otherwise this network will result in highly
jammed paths. This will also causes increase in delay of the network and packet losses, which
in turn results in retransmission of packets and thereby increases energy consumption. So these
routing protocols should also focus on all these parameters to select the shortest path such that
4. Syed Mohd Ali, Dr Syeda Gauhar Fatima, Syeda Kausar Fatima and Dr Syed Abdul Sattar
http://www.iaeme.com/IJEET/index.asp 100 editor@iaeme.com
it should increase the network lifespan [17]. The Dijkstra algorithm and the Bellman-Ford
algorithm are the two very well known and well-defined algorithms for shortest path routing
which can save power consumption. The Event-Sink Reliable Transport (ESRT) protocol
scheme can attain high rate of jamming control which can also preserve energy to large extent.
In this scheme, the configuration of the network is chosen very close to the optimum operating
point. The main functionality is carried on sink negligible functionality at resource constrained
sensor nodes. This method helps to achieve the required dependability with minimum energy
consumption. Network blocking can be considerably reduced. Other methods like scheming
duty cycle scheduling for sensor nodes was adopted to conserve energy. When nodes were idle
without doing the sensing job, they were allowed to enter the sleep state to conserve power.
This method does not effect the sensing operation of nodes[10]. Energy-Aware Sink Relocation
(EASR) method adopts energy-aware routing technique for message relaying and the network
lifetime of a WSN is substantially prolonged [18].
3.1. Data Aggregation Routing Protocol in Wireless Sensor Networks
Data aggregation is essentially done to save out from all data collected on sensors and
interconnects only data that is important for the application. energy consumption and also to
increase the data precision. Investigators have developed different plans to deal with the
extensive data generated. The frequency of sensing and conveying the data consumes the most
energy in a sensor network. The raw (i.e., sensed data) or processing (i.e., averaged sensed data)
data interactions between sensor nodes in a network. Processing device data enables important
data to be filtered Sensor node transmits sensed data to the base station through intermediate
nodes. Since base station is too far, it drains more energy to transmit data over long distance,
so the enhanced technique is to avoid direct transmission to outermost node and use only fewer
nodes to communicate with the base station. These nodes are called as aggregator nodes and
the process is mentioned as a data aggregation. The aggregator node collects data from multiple
sensor nodes of the network, aggregates the data packet using some aggregation function and
then sends the results to upper aggregator node that creates the query [19]. In many applications,
WSNs encounters some security problems, so the scheme of data aggregation not only improves
raw data and reduces the amount of transmission for network, but also keeps the network at a
high level of security [20]. Data Routing for In-Networking Aggregation (DRINA) protocol
uses some key number of messages for setting up the path and a routing tree. It consists of
maximized number of overlapping routes, high aggregation rate, reliable data aggregation and
transmission. This work can also be protracted to consider the spatial and sequential correlation
of the aggregated data. In Privacy-preserving Data Aggregation (PDA) protocol, the privacy of
both the participants and the keywords are protected. This scheme safeguards the private data,
increases the throughput. The Recoverable Concealed Data Aggregation (RCDA) protocol
designs the base station in such a way that, it verifies the reliability and legitimacy of all sensing
data and also it performs aggregation operations on the data. So, it provides better security,
increases throughput and packet delivery rate. Energy- Efficient, Secure, highly accurate and
Scalable Scheme for Data Aggregation (EESSDA) scheme establishes secure channel and
slicing technology to achieve secure data aggregation. This avoids encryption and decryption
operations during data aggregation; instead it saves energy and gains high accuracy of
aggregation results. So, it reduces time for data dispensation and it is scalable. An overhead is
caused due to slicing and assembling technique since, it has to decompose data into pieces,
sending data pieces to neighbor nodes and assembling their data pieces.
3.2. QoS Based Routing Protocol in Wireless Sensor Network
Many protocols based on refining the efficiency of various QoS parameters have been intended
so far. Deterministic bounds have been given for a node-to-node delay and dependability which
5. Energy Efficient Routing in Wireless Sensor Networks Based on QOS
http://www.iaeme.com/IJEET/index.asp 101 editor@iaeme.com
provides guarantee in terms of delay and reliability. Based on principle of network coding for
retransmitting lost packets in a single hop wireless network, well-organized latency and
bandwidth requirement can be attained. The loss recovery mechanism called Active Caching is
used to recover the lost packets from the source to the transitional node so that intermediate
information contains all the data just like source node. This retransmission improves the
dependability in the network. In co-operative communication network, transmission is carried
out by using a transmit node which exploits temporal and spatial diversity and reduces the
packet error rates. It also reduces the number of transmissions and improves overall
performance using reasoning interference management, the optimal throughput is attained by
the secondary node user when primary node user accepts a retransmission-based error control
scheme. Throughput is achieved by secondary node user. In the local cooperative relay for
resourceful data forwarding the best local transmit node is selected and additional overhead can
be effectively reduced. In one of the technique in cooperative forwarding, receiver can decode
only one transmission at a time. These techniques address the impact problem. Modified
CSMA/CA protocol and randomized waiting scheme is also addressed to reduce the number of
retransmissions. In novel adaptive retransmission algorithm, the misclassification probability
of the network can be improved. Here, the error correcting codes is designed to obtain the
efficient fault-tolerant classification system. In cooperative retransmission mechanism, a node
can retransmit lost packets on behalf of its neighboring node. However, lost packets can be
recovered by a neighboring node, a new transmission for each transmission attempt is still
required. In GORMA(Group Optimal Retransmission Medium Access Protocol),
retransmission with required QoS is designed and evaluated.
3.3. C. Security Based Routing in Wireless Sensor Networks
A strong security is required in majority of sensor network applications. Major application
comprises military, banking, applications working with subtle personal data which may include
health, home appliances. Location and energyaware characteristics for routing is necessary to
design a required protocol which gives a better transport rate, energy balancing and routing
competence. Some of network layer attacks on Wireless Sensor Networks are Eavesdropping,
selective forwarding, denial of service, message tampering, sinkhole attack, wormhole attack,
acknowledgement fooling etc. Eavesdropping is mainly in broadcast network any opponent
with a strong receiver could eavesdrop and interrupt transmitted data. Information like location
of node, Message IDs, Node IDs, timestamps, application specific information can be retrieved
by a burglar. Strong encryption techniques are necessary to prevent this attack. In a Denial-of-
Service (DoS) attack, an adversary attempts to disrupt, corrupt or destroy a network reducing
the performance of the network. Message interfering is the alteration of the information to be
forwarded to the destination. The Cyclic Redundancy Code (CRC) check is required at the
destination. If the redundancy check fails it would result in dropping the packet. In selective
forwarding attack, malicious nodes may refuse to forward certain messages and simply drop
them, ensuring that they are not propagated and reduces performance.
6. Syed Mohd Ali, Dr Syeda Gauhar Fatima, Syeda Kausar Fatima and Dr Syed Abdul Sattar
http://www.iaeme.com/IJEET/index.asp 102 editor@iaeme.com
4. PERFORMANCE EVALUATION OF DIFFERENT ROUTING
PROTOCOLS
TABLE 1 Comparison of Energy Efficient and QOS Based Routing Protocols
Author Algorithm/protocol Concept Performance
Dong, W
Efficient code
dissemination protocol
Dynamically configures the
packet sizes and accurately
selects the sender
Shortens the time spent in
selection of sender avoids
transmission collision and
transmission over poor
links
Degan Zhang
Energy balanced routing
method based on forward
aware factor
Next hop node is selected based
on the link weight and forward
energy density
Guarantees high QoS
Prolongs the function
lifetime
Leandro DRINA
Redundant data is aggregated
Shortest path is established
between the source and the sink
High and reliable data
aggregation
Maximum number of
overlapping routes.
Hamid Rafiei
Karkvandi
Effective lifetime aware
routing
Sensing spatial coverage is
proposed
Improvement in QoS and
network lifetime.
ui Wang
Kareesh –
KuhnTucker(KKT)
Optimal design is done on power
control at the physical layer the
design is based on cross layer
approach
Optimization of network
lifetime.
Power controlling is
increased
Demin Wang
Coverage and life time
optimization with
Gaussian
Distribution
Polynomial time complexity and
optimal deployment strategy is
used. Lifetime and coverage is
based on 2D Guassian
distribution
Minimizes the network
cost under two constraints
coverage
life time.
OZgur B
Akhan
Event to sink Reliable
transport in Wireless
Sensor Networks.
Sink will collect the information
of the sensor nodes within the
event radius no end-to-end
reliability.
Congestion control is
achieved. Maximization
of reliability and
conservation of energy.
D.Antony Arul
Raj
Enhanced energy efficient
multipath routing
It uses distance vector concept
and hop by hop routing.
It detects the multipath with
loopfree and disjoints using
flood-based route discovery.
Increases lifetime of the
network
Bio inspired methods
have several advantages
In a sinkhole attack, malicious sink is created which can not only interfere the transmitted
data but can also drop some important data and lead to other attacks like eavesdropping and
selective forwarding. In Wormhole attack, an opponent receives messages by making a
passageway and a low-latency connection in one part of the network and replays them in a
different part causing some misperception in the network. In acknowledgement spoofing: An
opponent can parody link layer acknowledgment for „„overheard‟‟ packets addressed to
adjacent nodes to convince the sender that a weak link is strong or that a dead or disabled node
is alive. By this attack a routing protocol may select the next hop in a path using link reliability.
6. SIMULATION
Most of the protocols conversed above can be designed and verified using NS2 simulation tool.
This simulation tool can regulate the overall performance of the designed protocols and can be
7. Energy Efficient Routing in Wireless Sensor Networks Based on QOS
http://www.iaeme.com/IJEET/index.asp 103 editor@iaeme.com
related with other network protocols. other simulation tool includes NS3, op-net, Omnet and
many others.
7. CONCLUSIONS
QoS in any network can be measured using the constraints such as data accuracy, aggregation
delay, fault tolerance, finest number of active sensors, coverage, energy efficiency,
responsiveness, reliability, throughput, timeliness, sturdiness Self-Configuration Privacy and
Security. In this paper, many routing protocols in Wireless Sensor Networks are conversed
based on cost, security, data aggregation and QoS requirement. Efficient routing protocol
controls the energy consumption of the network and they should reduce the difficulty of the
network. Different protocols based on reduced energy consumption are conferred. Many
protocols can be advanced to save energy by efficiently aggregating the data. The protocols
discussed in this paper can be assessed for various parameters using various simulation tools.
REFERENCES
[1] G L Wang, G H Cao, and T L Porta, “Movement-Assisted Sensor Deployment,” in Proc.
IEEE Inf. Commun. Conf., pp. 2469–2479, Aug. 2004.
[2] Marta and M Cardei, “Improved Sensor Network Lifetime with Multiple Mobile Sinks,” J.
Pervas. Mobile Comput., vol. 5, no. 5, pp. 542–555, October. 2009.
[3] P Ji, “DAST: A QoS-Aware Routing Protocol for Wireless Sensor Networks,” in
Proceeding of International Conferences on Embedded Software and Systems Symposia,
Sichuan, pp. 259-264, July 2008.
[4] J Luo and J P Hubaux, “Joint Mobility and Routing for Lifetime Elongation in Wireless
Sensor Networks,” in Proc. IEEE Inf. Commun. Conf., vol. 3, pp. 1735–1746, Mar. 2005.
[5] S Basagni, I Chlamtac, V R Syrotiuk, and B A Woodward, “A Distance Routing Effect
Algorithm for Mobility (DREAM),” in Proc. ACM MobiCom, pp. 76-84, Oct. 1998.
[6] B Bhuyan, H Sarma, N Sarma, A Kar and R Mall, "Quality of Service (QoS) Provisions in
Wireless Sensor Networks and Related Challenges," in Journal of Wireless Sensor Network,
vol. 2, no. 11, 2010.
[7] G Anastasi, M Conti, M Francesco, A Passarella, “Energy Conservation in Wireless Sensor
Networks: A Survey,” in Journal of Ad Hoc Networks, vol. 7, no. 3, pp. 537-568, 2009.
[8] Degan Zhang, Guang Li, Ke Zheng, Xuechao Ming, “An Energy-Balanced Routing Method
Based on Forward-Aware Factor for Wireless Sensor Networks” IEEE Transaction on
Industrial Informatics, vol.10, no. 1, February 2014.
[9] Chu-Fu Wang, Jau-Der Shih, Bo-Han Pan and Tin-Yu Wu, “A Network Lifetime
Enhancement Method for Sink Relocation and Its Analysis in Wireless Sensor Networks”
in IEEE Sensor Journal, vol. 14, no. 6, pp. 19321934, June 2014.
[10] Özgür B Akan, and Ian F Akyildiz, IEEE “ Event-to-Sink Reliable Transport in Wireless
Sensor Networks” in IEEE/ACM Transactions on Networking , vol. 13, no. 5, pp. 1033-
1066, October 2005.
[11] Hui Wang, Nazim Agoulmine, Maode Ma, and Yanliang Jin “Network Lifetime
Optimization in Wireless Sensor Networks” IEEE Journal on Selected Areas in
Communication, vol. 28, no. 7, pp. 1127-1137, September 2010.
[12] Hamid Rafiei Karkvandi, Efraim Pecht, and Orly Yadid-Pecht, “Effective Lifetime-Aware
Routing in Wireless Sensor Networks” IEEE Sensor Journal, vol. 11, no. 12, pp. 3359-3367,
December 2011.
[13] Jae-Wan Kim, Jeong-Sik In, Kyeong Hur, Jin-Woo Kim and Doo-Seop Eom “An
Intelligent Agent-based Routing Structure for Mobile Sinks in WSNs” in IEEE
Transactions on Consumer Electronics, vol. 56, no. 4, pp. 2310-2316, November 2010.
8. Syed Mohd Ali, Dr Syeda Gauhar Fatima, Syeda Kausar Fatima and Dr Syed Abdul Sattar
http://www.iaeme.com/IJEET/index.asp 104 editor@iaeme.com
[14] Demin Wang , Bin Xie, Senior and Dharma P Agrawal, “Coverage and Lifetime
Optimization of Wireless Sensor Networks with Gaussian Distribution” in IEEE
Transactions on Mobile Computing, vol. 7, no. 12, pp. 1444-1458, December 2008.
[15] Leandro Aparecido Villas, Azzedine Boukerche, Heitor Soares Ramos, Horacio A.B.
Fernandes de Oliveira, Regina Borges de Araujo, and Antonio Alfredo Ferreira Loureiro
“DRINA: A Lightweight and Reliable Routing Approach for In-Network Aggregation”
IEEE Transactions on Computers, vol. 62, no. 4, pp. 676-689, April 2013.
[16] Ankit Thakkar, Ketan Kotecha, “Cluster Head Election for Energy and Delay Constraint
Applications of Wireless Sensor Network”, in IEEE Transactions on Computers, vol. 62,
no. 4, pp. 676-689, April 2013.
[17] Nikolaos A Pantazis, Stefanos A Nikolidakis and Dimitrios D Vergados, “Energy-Efficient
Routing Protocols in Wireless Sensor Networks”: A Survey Communication Surveys and
Tutorials, vol. 15, no. 2, 2013.
[18] L Sun, Y Bi, and J Ma, “A Moving Strategy For Mobile Sinks In Wireless Sensor
Networks,” in Proc. 2nd IEEE Workshop Wireless Mesh Netw., pp. 151–153, Sep. 2006.
[19] Kiran Maraiya, Kamal Kant and Nitin Gupta, “Architecture Based Data Aggregation
Technique in Wireless Sensor Networks”, In International Journal on Computer Science
and Engineering, vol.3, no.3, pp. 1131-1138, 2011.
[20] Taochun Wang, Xiaolin Qin and Liang Liu, “An Energy Efficient and Scalable Secure Data
Aggregation for Wireless Sensor Networks”, In International Journal of Distributed Sensor
Networks, 2013.