2013 IEEE eee hard ware projects

Academic Projects for
EEE (embedded) (2013-2014)

We will develop your ideas and your papers also,
For any Further information call-9603150547
e-mail visionsolutions.9@gmail.com

EEE PROJECTS
Project
code

Title of the Project

Description

IEEE & JOURNAL BASED PROJECTS
IJEE01

Distribution
Transformer
Monitoring Using
GSM Technology

In this we will monitor transformer parameters
like current, voltage and temperature, if any of
these parameters found abnormal then this
systems sends SMS alert to user.

IJEE02

Prepaid Energy Meter
with GSM technology

the GSM technology is used so that the consumer
would receive messages about the consumption
of power (in watts) and if it reaches the
minimum amount, it would automatically alert
the consumer to recharge

IJEE03

Bluetooth remote
home automation
system using android
application

With this we can control home appliances from
our android phone. This safe and secure

IJEE04

Substation monitoring
and controlling using
GSM

Substation parameters are monitored and it also
send alert message when these parameters are
abnormal

IJEE05

Low cost wireless
sensor network in field
operation monitoring
of ac motor

IJEE06

Applied research of
the intelligent
temperature-controlled
speed adjustable motor
in radiator fan

Cost

IJEE07

Electronic energy
meter with instant
billing

IJEE08

Remote power on/off
control and current
measurement for home
electric outlets based
on a low-power
embedded board and
ZIGBEE

IJEE09

Energy saving project
for heating system
with ZigBee wireless
control network

IJEE10

Implementation of
ZIGBEE-GSM based
home security
monitoring and remote
control system

IJEE11

Automation of
residential electricity
cut off using network
based embedded
controller

IJEE12

Design of intelligent
streetlight monitoring
system based on micro
controller

IJEE13

GSM-based wireless
home appliances
monitoring & control
system

IJEE14

Real-Time
Atomization Of
Agricultural
Environment for

Social Modernization
of Indian Agricultural
System
IJEE15

Method of Measuring
Power Quality and
Development of
Monitor Device

IJEE

A novel technique of
ac power control using
micro controller based
inverter

PROJECTS BASED ON POWER ELECTRONICS
PE01

Design of controlled
DC voltage regulator
using semi converter

PE02

Design of controlled
DC voltage regulator
using full wave
converter

PE03

Industrial battery
charger by thysitor
firing angle control

PE04

Dual converter using
thyristors

PE05

Single phase H-bridge
inverter with PWM
technology using
microcontroller

PE06

Single phase sine
wave PWM H-bridge

inverter using micro
controller
PE07

SPWM space vector
pulse width
modulation

PE08

Step down cyclo
converter using dual
converter SCR bridge

PE09

speed control of dc
motor by using 8051

PE10

speed control of dc
motor using four
quadrant chopper

PE11

speed control of
universal motor using
IGBT

PE12

speed control of
induction motor using
voltage control

PE13

speed control of
frequency control

PE14

speed control of
v/f control

PE15

H-Bridge and PWM
based DC Motor
direction and speed
control system

PE16

Transformer less
Variable Frequency

Drive

PROJECTS BASED ON POWER SYSTEMS
PS01

system (measurement
of PF, voltage, current,
temp.)

PS02

Transmission line
multiple fault
indication to
substation

PS03

Automatic power
factor correction using
switching capacitors

PS04

Automatic power
static var
compensators

PS05

Transformer oil
temperature monitoring
with automatic Circuit
Breaker operation.

PS06

Design and
construction of Earth
fault relay for single
phase power system

PS07

energy tapping
identifier

PS08

Unbalanced three
phase optimal power
flow for smart grids

PS09

Automatic change
over for three phase
connection with data
logger

PS10

Automatic switching
of consumer
connection in
distribution feeder for
different load
distribution

PS11

Single phasing
preventer for
protection of three
phase (3-ph) loads

PS12

Microcontroller based
Three Phase Load
safety implementation
with phase fault
detector

PS13

Method of Measuring
Power Quality and
Development of
Monitor Device

PS14

An On-line
Monitoring System of
Transmission Line
Conductor

PS15

Over voltage or under
voltage tripping
mechanism

PS16

Three phase fault
analysis with auto
reset on temporary
fault and permanent
trip other wise

PS17

Auto selection of any
available phase in 3
phase supply system

PROJECTS BASED ON RENEWABLE ENERGY SOURCES
SL01

Solar based sinusoidal
PWM inverter design
using H-bridge

SL02

Solar pv cell tracking
system for obtaining
maximum power
output

SL03

Solar based irrigation
pumping system

SL04

Solar based LED street
light system with time
controlled and auto

dimming based on
ambient light
SL05

Solar based traffic
light control system

SL06

Wireless motor starter
with
acknowledgement
using solar energy for
agricultural
application

PROJECTS BASED ON DIFFERENT APPLICATIONS
AS01

Smart Remote for
controlling electrical
appliance through
android mobile.

With this we can control any electrical appliances 6500/with our android phone, no need of another including
remote .It is safe and secure also.
Bluetooth
module.

AS02

Virtual nurseWith this the patient can easily control his wheel
controlling wheel chair chair through simple and smart touching of
through android
android mobile
mobile

6000/including
Bluetooth
module
and
normal robot as
wheel chair
(extra charge
for
different
wheel
chair
arrangements)

AS07

Smart Home/office
automation through
android mobile.

With this we can control any electrical appliances
in home or office or industry with our android
phone, no need of another remote .It is safe and
secure also.

6500/including
Bluetooth
module

AS09

Smart regulator for
controlling fan speed
through Android
mobile.

With this we can control speed of fan or AC from
our android mobile.

6300/including
Bluetooth
module.

AS10

AC motor speed
controller through
Android mobile.

With this we can control speed of AC motor
from our android mobile

6750/including
Bluetooth
module and AC
motor.

AS11

Advanced street light
controlling system
through smart phone.

In this we can control street light from anywhere
through smart phone.

6200/-

Industry/home/office
automation through
smart phone.

With this project we can control any electrical
appliances of office or home or industry from
anywhere by using Smart phone.

6000/-

Industrial parameters
monitoring system
through Smartphone

We can monitor different parameters like
temperature, voltage, etc through online using
smart phone from anywhere

6500/-

Home /office/industry
electrical appliances
controlling by phone
call and confirmation
through voice
feedback.

In this we will switch off and switch on any
electrical appliances just by calling to this system
and press some buttons using DTMF technology.
This system also sends voice feedback of device
status that is whether device is on or off.

VP12

and controlling system
with voice alerts.

This system monitor the different parameters of
substation like voltage, current and temperature
and gives respective voice alerts when something
goes abnormal condition and takes necessary
action.

FS01

Standalone data logger
in SD/MMC card with
time stamp for
industrial applications.

In this we will monitor and store different
parameters in industry like temperature, voltage,
etc .We will store these parameters values in SD 6000/card along with measured time and date also. The
stored data format will be in .txt file or excel
format so that we can go through entire monthly
data using system.

FS05

Advanced embedded
system based a

As we know to save our world we have to reduce
usage of paper. This project helps in eliminate

AS13

AS14

VP08

With ARM7

With ARM7

With ARM7

6000/-

6000/-

6000/-

paperless feedback
system for colleges
and event management
systems

papers used in feedback systems. In this the
feedback and suggestions should be entered from
key board and this data will be stored in memory
card in a file format using ARM7 micro
controller.

ET01

Industry parameters
monitoring and
controlling system
based on embedded
web server.

In this we will monitor industry parameters like 6500/current, voltage, temperature, etc through online
using internet from anywhere in the world and we
can also control electrical appliances from
internet.

ET03

Zigbee and internet
based advanced street
light controlling
system.

With the help of internet and Zigbee technology
we can reduce man power in street light
controlling process. We can control street lights
from online itself.

6500/-

ET05

Internet based
home/office
automation.

With this system we can control any electrical
appliances of home or office from anywhere in
the world using internet.

6000/-

EE01

Wireless Scrutinizer
for Detecting the fault
in Power System.

We take a 230v supply voltage and measure the
6250/current in it. Fault condition is created by using
bulbs. We measure the input and output current of
the load using 2 ct's. When the bulb is on we
assume fault is created and it is indicated in
another section using rf.

EE02

Wireless load
measuring meter for
power line.

The power in the transmission line is calculated
by measuring voltage, current, power factor, and
this is indicated in the display by sending the data
wirelessly.

6500/-

Up-to-date Recording
System of Power Line
Losses.

The power loss in the transmission line is
calculated by measuring the voltage drop in the
line. The voltage drop is created by using a
resistor and an inductor.

6800/-

Underground cable
fault identification.

The objective of this project is to determine the
distance of underground cable fault from base
station in kilometers

EE03

EE06

.

6900/-

EE05

Two quadrant chopper
drive for DC motor
speed control.

This can be done for small dc motor as well for
big (around half hp) motors also depends upon
motor availability.

6600/with
small dc motor

EE06

Wireless motor starter
with
acknowledgement
using solar energy for
agricultural
application

This system sends a message to user when power
comes an also sends information whenever power
is absent. This system works with solar energy

6500/including
GSM
and
solar

EE07

Four quadrant chopper
drive for DC motor
speed control

This can be done for small dc motor as well for
big (around half hp) motors also depends upon
motor availability

6800/with
small motor

EE08

design of closed loop
controlled DC voltage
regulator using full
wave semi- converter

the 230v ac is converted in to dc using SCRs and
the output voltage is measured by the ADC and
the firing angle of the SCRs is controlled by the
microcontroller only 2 SCRs and 2 diodes will be
there is converting circuit

6750/-

EE09

Automatic power
switching capacitors.

The power factor is measured by using zero
crossing detectors and it is corrected by
connecting the capacitors using TRIACs or
relays.

6200/-

EE10

Automatic power
static VAR
compensators.

connecting a single capacitor of larger value
using TRIAC and by controlling the firing angle.

6000/-

EE11

Design of closed loop
wave converter.

The 230v ac is converted in to dc using SCRs and
microcontroller only 4 SCRs will be there in
converting circuit.

6000/-

EE12

Three phase load
protector with
automatic fault
indication using micro

Whenever a three phase fault is occurred it will
be indicated by using OP-AMPS and by
measuring voltages and currents. And the type of

6000/-

processor.

fault is indicated in the display.

EE13

Thyristor based soft
starter.

The advantage of these starters is the starting
current can be controlled to a much lower values
than that of the value achieved with the
traditional starters.

6500/-

EE14

Thyristor based
star/delta starter.

6 bulbs are used to represent the motor. There are
connected to form into 3 pairs with 2 each
connected in series. They are connected in star
first then in delta to the three phase supply.

6000/-

EE15

Unbalanced Threephase Optimal Power
Flow for Smart Grids.

Whenever a three phase load is unbalanced it will
correct the load by switching some of the single
phase loads to the other phases.

EE16

Maximum Demand
Controller for
Industries.

This system automatically switches off the low
priority appliances whenever maximum load
power reached.

6750/-

EE17

Automatic Switching
of consumer
connection in
distribution feeder for
efficient load
distribution


6000/-

EE18

Distribution grid
transformers
monitoring using GSM
with forced cooling
control system

The data at the distribution transformer is
observed using GSM and if there is any fault it
will on the cooling fans. If the fault is on current
then it will switch off the transformer

6750/including
GSM

EE19

Remote substation
monitoring system
using bidirectional
power line
communication.

With the same 230 v power line we can monitor
substation parameters.

Around 9000
to
10,000/(modules are
not ready)

EE20


the 230v ac is converted in to dc using SCR's and

6500/-

6000/-

wave converter
through computer.

microcontroller only 2 SCRs and 2 diodes will be
there is converting circuit. The required output
voltage is set by using hyper terminal.

EE21

controlled ac voltage
regulator using
TRIAC.

Same as the speed control of ac motor but here
output voltage is measured using ADC.

EE22

Transmission line
Voltage and current faults are detected using
multiple faults
differential protection scheme and the type of the
detection and
fault is transmitted using RF.
indication to electricity
board.

6500/-

EE23

Power theft
identification system
in distribution lines
using differential
power measurement.

Current at both the ends of transmission line are
measured using CTs and if there is a difference in
those currents it means power was theft.

6000/-

EE24

Automatic transformer
shunt and series
parameter calculation
from open circuit and
short circuit test
reading.

The OC and SC test readings of the transformer
are given through keypad and microcontroller
will do calculation and give the output on the
LCD.

6750/-

EE25

Closed loop dc motor
speed control.

In this we will control the speed of dc motor and
we also take the feedback from the motor and
correct the speed level to desired level.

6750/-

EE26

Design of cyclo
converter using micro
controller.

The input supply frequency is about 50 Hz. We
can get the multiples of 50hz using the SCRs.
controller will generate pulses for 4 SCRs and the
output frequency of the sine wave is controlled.

6800/-

EE27

Reverse power
protection for
generator.

The phase angle of the current and voltage are
measured to measure whether the power is in
reverse direction of not if the power is in reverse

6750/-

6000 with bulb
as motor.

direction then it will switch of the supply.
EE28

Automatic transformer
protection using
numerical relay.

Difference in currents of the two current
transformers' will give a buzzer sound.

6750/-

EE29

Automatic phase
sequence corrector.

Whenever the RYB phase sequence is changed it
will be corrected by using relays.

6200/-

EE30

Design of earth fault
relay.

Whenever there is an internal fault or the earth
6750/fault then we can sense that by measuring the
magnitude of the current and this will give type of
the fault.

EE31

Reactive power
compensation using
STACOM.

connecting a single capacitor of larger value
using TRIAC and by controlling the firing angle.

3000/-

EE32

Speed control of
universal motor using
IGBT.

This will be same as the speed control of the ac
motor using TRIAC but only difference is IGBT
is used to vary the voltage and we will control the
dc voltage. First we will convert the 230v ac into
dc and then we will control.

6200/including
motor

EE33

Efficient power saver
for street lights using
LDR, RTC, LEDs
light with solar power

This project saves more power that is being 6500
wasted in present street light switching. In this we
will consider time and sunlight intensity and we
use LED lights and solar power

EE34

Agricultural motor
controlling with motor
safety and water level
indicator using GSM.

The former can control his field motor without
need of going to his field just by sending
message. This system also provides safety motor
from over heat, low phase power and water level
indication.

EE35

Automatic changeover
for 3 phases
connections with data
logger.


EE36

Solar Tracking system
for Maximum power

In this the panel will give maximum power by Depends upon
changing its direction according to sun light Mechanical

6000/including
GSM
6800/-

output with real time
power monitoring
system.

direction.

EE37

Voice guider and
medicine reminder for
patients and old age
persons.

In this the user will be given one remote (IR or 6750/- with RF
RF or ZIGBEE), he has to press any button to get
what service he wants and that is played from
voice IC so that any person can hear it and come
to the user. Another feature of this project is to
remind the user for medicines.

EE38

Broken conductor
detection for overhead
lines.

The broken conductor can be sensed by using the
voltage drop in the line. We will give three
switches to indicate broken condition when the
switch is operated it will indicate which switch is
operated in terms of kilometers.

6000/-

EE39

Intelligent shopping
trolley using RFID

With this we can save billing time and
instantaneously the rate and expiry date of the
product will be displayed so that we can do the
shopping within our budget.

6500
with
RFID and 8
tags

EE40

Elegant home with
power saving, security,
safety, remote
controlling and auto
control of water tank
motor

In this we will provide multi features to home like 6000/remote controlling of home appliances ,auto
controlling of lights depends upon sunlight and
auto controlling of water tank motor when tank is
full and alert the user when intruders come or
when gas leakage or fire accident occurs

EE41

Intelligent train engine
to avoid accidents and
controlling
railway
gate automatically

In this we will control the train by monitoring the 6000/driver’s position or activeness and the gate will b
e controlled automatically when train is near the
gate.

EE42

Design
And
Development
Of
Prepaid Energy Meter
With
Serial
Data

In this we have one smart card which contains 6500/number units depends upon the amount we will smart
pay. These units will be given to energy meter reader
system to activate and it will supply power to

arrangement
and size of
It can be done with two motors arrangement or solar
panel
single motor arrangement
(2500 to 6000)

with
card

Transmission

home till that units are consumed and we have
recharge same card again.

EE43

Protection And
Control Of Low
Voltage Motors Used
In Industrial
Applications.

The motor will be protected from over voltage,
current, temperature and ground fault conditions.
6000/- (with
This system immediately switches off the motor
whenever abnormal condition occurs and intimate RF and motor)
to control room through RF communication.

EE44

Flexible load sharing
of transformer with
GSM SMS

It continuously measure the load current
and it shares this load with another
transformer when the load is more and
send an alert through message. The user
can also share directly whenever he wants
just by sending message

6500/-

EE45

Agriculture field
motor control system
using GSM

Motors in the field are controlled with the help of
predefined SMS.

3000/-

EE46

Industrial Electrical
Devices Control
System

By this project, we can control the devices in the
industries by sending predefined SMS to the
controlling unit.

6000/-

EE47

GSM based DC
Motor Speed and
Direction Control

The speed and direction of DC motor can be
controlled by sending predefined SMS to the
system

EE48

Cell Phone based
Street Light
Controlling System
with light failure
indication system.

The on and off controls of the street lights can be
done using GSM technology. If any light does not
6700/-with
work then that information is sent as message to
GSM
electricity department.

EE49

Temperature
Measurement over
GSM Mobile

Temperature sensor is used to measure the
temperature in a particular room and this
measured value is sent through GSM to the user
mobile.

3000/-with
GSM

Password protected
GSM based Device
control.

Controlling the devices from remote places only
by authorized persons.

6000/-with
GSM

EE50

6000/-

EE51

Fingerprint based
Access Control system

Security is provided in restricted areas using
fingerprint technology. The persons are asked to
give their fingerprint and the system compares
this fingerprint with the already stored
information in the system and only allows into if
it is an authorized one.

6000/-with
Finger print
module

EE52

Finger print based
elevator (lift)
operating system.

Only authorized persons are allowed to access the
lift controls.

6000/-

EE53

Low Cost Wireless
Sensor Network In
Field Operation
Monitoring Of AC
Motor.

The motor will be protected from over voltage,
3500 with RF
current, temperature and ground fault conditions.
This system immediately switches off the motor
5000
with
whenever abnormal condition occurs and intimate Zigbee
to control room through RF communication.

EE54

A Zigbee Smart
Energy Meter
Implementation For
Energy Efficient
Buildings.

In This system one control system collects the
data from different meters in the building and we
can control the appliances of each floor through
this control system.

Development of a
smart power meter for
AMI based Zigbee
communication
Advanced Metering
Infrastructure (AMI).

This will be useful in heavy apartment’s
.individual meters data will be collected and
maintained by main system .this main system
sends collated data to electricity board.

Remote Power On/Off
Control And Current
Measurement For
Home Electric Outlets
Based On A LowPower Embedded
Board And Zigbee

We can control the home appliances through
Zigbee remote and this system will display the
power consumed by the loads.

EE55

EE56

7000/-

3000 without
modules
7500 with
module
And 2500 per
each
extra
meter
2750 without
modules
5750 with
module

Communication
EE57

EE58

EE59

EE60

EE61

Remote-Controllable
and Energy-Saving
Room Architecture
Based on Zigbee
Communication.

In this we can control the loads through Zigbee
remote or they will also be controlled
automatically to save the power.

3000 without
modules

Applications of Short
Industrial devices are monitored and controlled
Range Technologies to using Zigbee Technology.
Industrial Automation:
A Zigbee Approach.

2750 without
modules

System for Measuring This system measures the power from each home
Power Parameters with and sends to central system which is useful in
Zigbee Connectivity.
apartments.

3000 without
modules

Wireless Data
Encryption and
Decryption Using
ZigBee

Which used in security applications

2750 without
modules

ZigBee Based
Automated Irrigation
System.

Using ZigBee this system controls the irrigation
system automatically.

6000
module

5750
module

6000
module

with

with

with

5750 with
module
2750 without
modules
5750
module

EE62

Bluetooth Robot with We can control this robot through Bluetooth from
CMOS
image PC and the video sent by robot can be seen in TV
sensor(SPY ROBOT)
or PC

7000/-

EE63

Remote
controlled With this we can control home appliances like
home
automation lights, fan, motor, etc through Bluetooth. This is
using Bluetooth
safe and secured.

6500/-

EE64

Bluetooth
based This project measures different parameters in
industrial
data industry like voltage, current and temperature and
acquisition system
transmit this data to PC continuously through

6000/-

with

Bluetooth.
EE65

Industrial
devices With this we can control industry appliances like
controlling
system machines and motors through Bluetooth. This is
using Bluetooth
safe and secured.

6000/-

EE66

Intelligent electricity This system receives the units consumed from
billing system using various meters and generates the bill accordingly.
Bluetooth
This saves the cost, time and manpower.

6000/-

EE67

Touch screen based
smart home
automation

We can control the home appliance just by smart
touch

2000 without
modules

Electrical parameters
data logger

In this we will continuously measure and display
electrical parameters like voltage, current,
frequency and temperature

EE68

4000
with
touch screen
and 5000 with
RF and touch
screen

6000/-

EE69

Smart
horn
for This system reduces the sound pollution that is
vehicles with alcohol generated by unnecessary use of horn. This
detection for drivers
controls the horn intensity depends upon vehicle
distance and also gives the special sound when
object is detected at back side if vehicle moves
backside and this system only allows for driving
if driver does not consume alcohol

6250/-

EE70

Smart blind stick with This stick gives different sound intensity depends
ultra sonic sensor.
upon the object distance from person or we can
play some voice also depends upon distance.

6000/-

EE71

PIR sensor based This project is used to save the power in
power
saver
for conference halls and in auditoriums. When there
auditorium
and are no persons in the hall ,then lights and fans

6300/-

conference halls.

will be switched off automatically

EE72

Intelligent security and This project detects fire accidents, gas leakages
6500/safety system for and also alert through SMS when main door is
colleges and industries closed without closing any other room entrance or
if any other door is opened without opening main
door

EE73

An Efficient
Monitoring Of
Substations Using
Microcontroller Based
Monitoring System
using RF

This system monitors the subsystem to provide
safety and intimate to control room through RF

6500/-

EE74

Wireless Power Grid
Controller
RF based industrial
Automation System

With this we can control the power grid through
PC using RF communication
The industrial loads like motors, coolers, etc are
monitored and controlled by a RF remote.

6000/-

EE76

DC motor speed and
direction control
using RF

In this project we can control speed and direction
of DC motor depending on the requirement using
6500/RF signals

EE77

Wireless Stepper
motor control using
RF

The stepper motor direction can be controlled
using RF communication.

6500/-

EE78

Power Management
The various appliances in the hotels are
System in Hotels using controlled by giving commands from the PC.
PC.

6000/-

EE79

PC based Hi-tech
We can control the home appliances just by
Home Implementation. sitting in front of PC.

6000/-

EE80

Industrial
Automation using
PC.

6000/-

EE75

The industrial appliances are controlled by the
commands issued from the PC. The controlling
unit receives these commands from the PC and

6500/-

controls the devices according to the commands.
EE81

Industrial electrical
appliances control
using IR.

To reduce the manpower for controlling the
devices we are implementing this project. Here
we will be controlling devices by using a general
TV REMOTE.

6000/-

EE82

DC motor speed and
direction control using
IR.

A DC motor is controlled using wireless
communication. In this project we can control the
speed of the dc motor and its direction.

6000/-

EE83

Stepper motor control
using IR

The direction of the stepper motor can be
controlled using an IR remote.

6200/-

EE84

Automatic Room light
controller with visitor
counter using IR.

This project displays the number of persons
present in the room and controls the light
according to the intensity of daylight.

6000/-

EE85

Auditorium
Controlling System

The lights and fans in auditorium are controlled
by IR remote.

6000/-

EE86

Shopping Malls
Security and Power
Management
System using IR

The design of security and the method of
consuming the power in the shopping malls are
carried out in this project.

6000/-

EE87

AC motor speed
control using TRIAC

The speed of AC motor can be varied rapidly on
and off by TRIAC.

6000/-

EE88

Phase Sequence
Indicator and
Controlling System.

The controlling unit continuously whether 3phase is coming from the line or not so as to run
the motors which run only with 3-phase. If 3phase is not coming, the controlling unit
automatically shuts down the system.

6000/-

EE89

Boiler Monitoring and
Control System.

The temperature is measured and controlled for
the industrial boilers.

6000/-

Involuntary Industrial
Power Scheduler using
Embedded System.
Power Saver for
Advertisement
Hoardings using RTC.

The power management in the industries can be
done effectively using this project.

6800/-

This system switches on the lights only at
preprogrammed timings using RTC thus saving
the power up to the maximum extent.

6800/-

EE92

Solar Tracker for
acquiring maximum
power.

The project aims at designing a system that would 6000/sense and follow the position of the sun and rotate
the panel in the direction of the sun to obtain
maximum power output.

EE93

Water Scheduling
for Municipalities

Water supply to different localities is done on
time basis. The supply will be automatically cut
once the time allotted to that particular locality
lapses.

6800/-

EE94

Electronic Security
System for
Homes/Industries
with auto dialer.

This system provides security to the homes or
offices by interfacing sensors with the controlling
units. If anything goes wrong, the system
automatically dials up to the predefined number
and also activates the alert system.

6000/-

EE95

Energy Saver for
Automatic Room
Light Controller with
Visitor Counter

The system aims at saving the power by
switching on/off the light depending upon the
sensor output. It also counts the number of
persons present in the hall and displays this value
on the LCD.

6000/-

EE90

EE91

2013 IEEE eee hard ware projects

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to 2013 IEEE eee hard ware projects

Similar to 2013 IEEE eee hard ware projects (20)

More from Vision Solutions

More from Vision Solutions (20)

Recently uploaded

Recently uploaded (20)

2013 IEEE eee hard ware projects