High voltage fuse blown indicator with voice based announcement system
•Download as DOC, PDF•
0 likes•1,747 views
This document describes a high voltage fuse blown indicator system with voice announcement. The system monitors current to two light bulbs using a current sensor and ADC to convert the analog signal to digital. The microcontroller checks if the current increases past a threshold level and announces via speaker if the fuse is blown to automate detection and provide voice notification of the status.
Report
Share
Report
Share
Recommended
Invitation energetab 2016 
Grab the opportunity to see full range of technologically advanced equipment, aimed at generating and supplying electricity.
Iskra will present solutions and use cases in the fields of automation, efficient installations & control equipment.
We look forward to seeing you at Energetab 2016!
Ambient backscatter communication
This document discusses ambient backscatter communication, a new wireless technology that allows devices to communicate and transmit data to one another without an internal power source. It works by harvesting radio signals in the air from various technologies like WiFi and cell networks and using them both as a power source and medium for communication. The document outlines some of the design challenges in ambient backscatter like weak backscattered signals and lack of a centralized controller. It provides a system diagram and discusses potential future applications like battery-free on-body sensors for healthcare.
Invitation sps ipc drives_2016
The document is an exhibition invitation for Bistable Switches Energy Sector from November 22-24 in Nuremberg, Germany at Hall 1 Stand 628. The exhibition will feature Iskra's products and system solutions for the energy sector, including efficient installations, contactors, circuit breakers, switches, meters, software, capacitors, and overvoltage protection. Attendees can see new products like bistable switches, power quality analyzers, supervision relays, protection relays, and energy meters with wireless communication capabilities.
Open Power Monitor
This was my first attempt in the field of Embedded Electronics, so kindly have a look at my brief presentation that I have made about my work and experience in this field for the very first time.
Eddy current digital proximity sensing for vibration detection
This document discusses eddy current digital proximity sensing for vibration detection. It begins with an introduction to eddy current proximity sensing and its uses. It then explains the model of an eddy current probe system and the principles of digital proximity sensing, which uses software to map the nonlinear relationship between impedance and gap changes. The document discusses how digital proximity sensing can be used to detect vibrations and lists advantages like being portable and cost effective, while also noting challenges like temperature compensation and interchangeability. It concludes that integrating technologies like integrated circuits and the Internet of Things could further advance digital proximity sensing applications.
Analog vs digital
This document discusses analog versus digital systems and the digital revolution. It notes that analog values are continuous while digital values are discrete. It gives examples of analog clocks and temperature measurements versus digital clocks. The document then discusses how many devices have been converted from analog to digital, including record albums to CDs, VHS tapes to DVDs, and analog TV to digital TV. Finally, it briefly explains how CD players work by taking the digital data from the CD and converting it to an analog audio signal for playback through speakers.
Remote ac power control by android application with lcd display
This AC power control using thyristor for induction motor runs on the principle of firing angle control of thyristors. It is controlled by
android remote.
Embedded based electricity theft identification
This project involves developing a microcontroller-based system to identify electricity theft. It monitors energy usage using current and voltage sensors and displays the readings on an LCD screen. When overload is detected, the system will provide intimation by triggering a buzzer. Implementing this across an entire area network could help the electricity board detect theft more effectively by monitoring for load variations. The system works by using a precision rectifier and amplifier to measure current, a voltage divider for voltage, and a microcontroller to process the data and control the LCD, buzzer, and relays.
Recommended
Invitation energetab 2016
Grab the opportunity to see full range of technologically advanced equipment, aimed at generating and supplying electricity.
Iskra will present solutions and use cases in the fields of automation, efficient installations & control equipment.
We look forward to seeing you at Energetab 2016!
Ambient backscatter communication
This document discusses ambient backscatter communication, a new wireless technology that allows devices to communicate and transmit data to one another without an internal power source. It works by harvesting radio signals in the air from various technologies like WiFi and cell networks and using them both as a power source and medium for communication. The document outlines some of the design challenges in ambient backscatter like weak backscattered signals and lack of a centralized controller. It provides a system diagram and discusses potential future applications like battery-free on-body sensors for healthcare.
Invitation sps ipc drives_2016
The document is an exhibition invitation for Bistable Switches Energy Sector from November 22-24 in Nuremberg, Germany at Hall 1 Stand 628. The exhibition will feature Iskra's products and system solutions for the energy sector, including efficient installations, contactors, circuit breakers, switches, meters, software, capacitors, and overvoltage protection. Attendees can see new products like bistable switches, power quality analyzers, supervision relays, protection relays, and energy meters with wireless communication capabilities.
Open Power Monitor
This was my first attempt in the field of Embedded Electronics, so kindly have a look at my brief presentation that I have made about my work and experience in this field for the very first time.
Eddy current digital proximity sensing for vibration detection
This document discusses eddy current digital proximity sensing for vibration detection. It begins with an introduction to eddy current proximity sensing and its uses. It then explains the model of an eddy current probe system and the principles of digital proximity sensing, which uses software to map the nonlinear relationship between impedance and gap changes. The document discusses how digital proximity sensing can be used to detect vibrations and lists advantages like being portable and cost effective, while also noting challenges like temperature compensation and interchangeability. It concludes that integrating technologies like integrated circuits and the Internet of Things could further advance digital proximity sensing applications.
Analog vs digital
This document discusses analog versus digital systems and the digital revolution. It notes that analog values are continuous while digital values are discrete. It gives examples of analog clocks and temperature measurements versus digital clocks. The document then discusses how many devices have been converted from analog to digital, including record albums to CDs, VHS tapes to DVDs, and analog TV to digital TV. Finally, it briefly explains how CD players work by taking the digital data from the CD and converting it to an analog audio signal for playback through speakers.
Remote ac power control by android application with lcd display
This AC power control using thyristor for induction motor runs on the principle of firing angle control of thyristors. It is controlled by
android remote.
Embedded based electricity theft identification
This project involves developing a microcontroller-based system to identify electricity theft. It monitors energy usage using current and voltage sensors and displays the readings on an LCD screen. When overload is detected, the system will provide intimation by triggering a buzzer. Implementing this across an entire area network could help the electricity board detect theft more effectively by monitoring for load variations. The system works by using a precision rectifier and amplifier to measure current, a voltage divider for voltage, and a microcontroller to process the data and control the LCD, buzzer, and relays.
Automatic power failure indicator to eb sub station
This project automatically detects power failures in homes and industries and wirelessly notifies the local electricity board. It uses a power sensor connected to a microcontroller to detect failures, which then sends a signal via radio frequency transmitter. At the electricity board office, a receiver gets the signal and sends it to another microcontroller connected to an LCD display to show the status and location of the power failure.
Tlc ppt
This document describes a traffic light control system that uses infrared sensors to detect vehicle traffic density and dynamically adjusts traffic light timing. It contains 3 zones of IR transmitter-receiver pairs that monitor vehicle presence. When vehicles block the IR light, the microcontroller detects lower traffic density and extends the green light time. The system is designed and simulated using codes to help build the hardware. It aims to reduce traffic congestion through time-based coordination of lights according to present traffic conditions.
Intelligent wireless street lighting system
ieee 2012 projects for m tech btech ece eee embedded systems@ srcembedded solutions- hyderabad.
web:www.srcembedded.com,
ph-8297 313 858
mail:srcembedded@gmail.com
Smart rack sensor AKCP Inline Power Monitoring
Smart rack sensor AKCP, monitoring power line using existing PDU, integrated with temperature - humidity sensor to install in every rack
Lec1 - Analog and Digital systems
Introduction to Analog and Digital Systems - Basic definition, Representation, Examples and applications of Analog and Digital Systems - Advantages of Digital system over Analog system - Process of conversion from Analog to Digital and Digital to Analog signal - Digitization Examples - Signal representation of voltage and current in terms of Binary values - Representations of Binary quantities using different terminologies - IC Complexity classification - IC Layout - Development of ICs in terms of size
Unit 4
This document discusses various storage and display devices used in instrumentation systems. It describes different types of recorders like analog recorders, digital recorders, and oscillographic recorders that are used to record electrical and non-electrical quantities over time. Magnetic tape and disc recorders, which use magnetic media to store data, are also covered. The document also outlines different types of printers like impact, non-impact, inkjet and laser printers. Additionally, it provides details about CRT displays, LEDs, LCDs and dot matrix displays that are commonly used in instrumentation.
Keynote Speech - Low Power Seminar, Jain College, October 5th 2012
This was the keynote speech I gave in Jain for the Low Power Seminar using Synopsys Tools on October 2012
6.4.3comparison2
The document compares features of digital and analogue meters. Digital meters are slower than analogue meters due to electronic conversion, but are less susceptible to electrical noise. They provide correct polarity readings while analogue meters may damage if polarity is incorrect. Some digital meters may display irregular least significant digit changes, while analogue meter readings depend on damping mechanism stability.
Power electronics embedded power system vlsi l abview titles
The document discusses several topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI circuits. Specifically, it provides summaries of recent projects related to voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, and improved DC-DC converters. It also lists project ideas involving power quality improvement, reactive power compensation, and automatic load shedding schemes. Additional sections outline embedded system projects involving wireless monitoring, water quality monitoring, and motor control. Application areas for LabVIEW include online control of robots and remote experimentation. Image processing projects involve tasks like video object extraction, tracking, and defect detection. The final section lists recent
Latest Digital Electronic Projects
We provide you the Latest Digital Electronic Projects for Electronics Engineering Students. You can choose the best of your choice and interest from the list of topics we suggested. All new project ideas that are appearing focuses to improve the knowledge of Engineering students.
https://www.elprocus.com
Visit our page to get more ideas on Latest Digital Electronic Projects for Electronics Engineering Students these ideas developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Simple electronic dark detector or sensor circuit using ldr
This document describes a simple dark detector circuit using an LDR (light dependent resistor) that can act as a mini police alarm. The circuit uses an LDR, resistor, transistor and a buzzer or LED to create a sensor that will sound an alarm if the LDR is exposed to darkness, indicating an intrusion has been detected. The circuit requires a 6-9V DC power source and creates a simple intruder alert system with few components.
EPC Solutions Lighting Solutions
EPCS's street lighting solution gives you the capability to remote monitor, and control street lights, in a fail-proof way. The solution has Internet connectivity in order to upload data to cloud application, to enable remote monitoring. The data can be accessed from smart phones as well. The solution allows you to schedule the different operations of light, according to time of day. This helps in minimizing human interference with daily operations. The solution maintains historical data in order to help you make informed business decisions based on consumption patterns.
Automated Lit-Green LED Street Light Solution
Key benefits
• Control street lights at feeder level or individual level.
• Reduce your electricity bill by up to 30%.
• No additional cost of wiring.
• Find faulty lights.
• Schedule feature for ON / OFF / DIM.
• Measure the electricity consumption and associated theft / faults.
• ON / OFF control for
o Single lighting panels
o Multiple fixture panels
• Centralized monitoring and control of lights.
• Integration with existing SAP / ERP system.
• Customized solutions are available as per requirement from design to delivery for OEMs.
Automated street lighting solution (feeder level automation)
Key benefits
• Control multiple street lights from single feeder for either single or multiple phases.
• Timely ON / OFF schedule that can be monitored and changed via SMS.
• Get alerts in case of theft / fault in the lights.
• Reduce your electricity bill by up to 30%.
• Centralized monitoring and control of lights with reporting.
• Get current readings and device fault details on SMS.
• Get detailed electricity consumption reports.
• Specially tailored solutions to match your requirements, from design to delivery for OEMs.
Application areas
• Street lighting
• IT campus lighting
• Parks
• Townships
• Bridges and tunnels
• Hazardous locations
• Industrial lighting
• Mines
• Pathway / Roadway
• Warehouse / Parking Lot
Battery level Indicator Circuit
It is a battery level indicator program which tells the level of the battery how much it is charged. It includes the proteus pics of the program. I tells the working of the circuit.
IoTPresentation2 (1)
The document discusses security challenges for Internet of Things (IoT) devices with limited energy and computational resources. It outlines three main threats to IoT security: confidentiality, integrity and availability. Approaches to address energy concerns, like improving batteries or harvesting ambient energy, are limited. Conventional cryptography is also unsuitable due to the requirements for code space, memory and power. The document proposes reusing existing security functions and being selective about transmissions as potential solutions to enable more energy-efficient security for low-power IoT devices.
smart street light ppt
The document presents a smart street light system that uses sensors to detect vehicles and adjusts street light brightness accordingly to save energy. It aims to reduce wasted energy by turning lights off when no vehicles are present. The system uses IR sensors to detect vehicles, microcontrollers to control LED street lights, and PWM technique to dim lights to 10% intensity between vehicles. It is presented as an energy efficient and cost effective alternative to existing street light technologies.
Smart gprs/gsm
This document provides an overview and specifications for a single phase smart GPRS/GSM meter. It includes the following key points:
1) The meter is designed for residential consumers in both urban and rural areas, with a rated voltage of 230V and maximum current of 5(60)A.
2) Communication is enabled via GPRS/GSM modules using protocols like DLMS TCP/IP and optical ports for local communication.
3) The meter measures active energy import and export, and provides load profile data and billing information with 12 months of billing history storage.
4) Specifications include accuracy class, voltage and frequency ranges, measurement functions, communication protocols and GPRS modem details.
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Digital Electronics circuits are those which operate with digital signals. These are discrete signals which are sampled from analog signal. Digital circuits use binary notation for transmission of signal. Copy the link given below and paste it in new browser window to get more information on Advantages and Disadvantages of Digital Electronics:-
http://www.transtutors.com/homework-help/electrical-engineering/digital-electronics/advantages-disadvantages/
2013 IEEE eee hard ware projects
This document provides information about various academic projects related to embedded systems and electrical engineering. It lists 30 projects focused on areas like power electronics, power systems, renewable energy, and various applications. Each project listing includes a title, brief description, and estimated cost. It also provides contact information for anyone seeking further details about the projects.
High voltage fuse blown indicator with automatic fuse roll system
The document describes a high voltage fuse blown indicator with an automatic fuse roll system. The system aims to automatically replace blown fuses on the secondary side of transformers to avoid delays from manual recovery. It will attempt to replace blown fuses up to two times for temporary faults before alerting the substation of a potential permanent fault. The automatic recovery system reduces manual work and delays compared to traditional fuse recovery methods.
Principle of management
This document outlines key concepts in management principles as defined by various experts. It discusses definitions of management, the nature and scope of management, management functions including planning, organizing, staffing, directing and controlling. It also covers the importance of management and principles of management according to experts like Fayol and Taylor. Additionally, it discusses levels of management, classification of decisions, steps in decision making, and techniques for decision making.
Skin tone based steganography
This is the slides for the seminar on skin tone based steganography.
By GIRISH RAM M, TKM COLLEGE OF ENGINEERING KOLLAM
Fault tolerance techniques for real time operating system
This document discusses fault tolerance techniques for real-time operating systems. It covers techniques for memory management, kernel considerations, process and thread management, scheduling, and I/O management. The key techniques discussed include redundancy, error correcting code memory, event logging, static scheduling tables, and replication to allow real-time operating systems to continue operating reliably in the presence of faults and failures. The goal of these techniques is to ensure safety-critical systems can meet all requirements and avoid catastrophes even if faults occur.
More Related Content
What's hot
Automatic power failure indicator to eb sub station
This project automatically detects power failures in homes and industries and wirelessly notifies the local electricity board. It uses a power sensor connected to a microcontroller to detect failures, which then sends a signal via radio frequency transmitter. At the electricity board office, a receiver gets the signal and sends it to another microcontroller connected to an LCD display to show the status and location of the power failure.
Tlc ppt
This document describes a traffic light control system that uses infrared sensors to detect vehicle traffic density and dynamically adjusts traffic light timing. It contains 3 zones of IR transmitter-receiver pairs that monitor vehicle presence. When vehicles block the IR light, the microcontroller detects lower traffic density and extends the green light time. The system is designed and simulated using codes to help build the hardware. It aims to reduce traffic congestion through time-based coordination of lights according to present traffic conditions.
Intelligent wireless street lighting system
ieee 2012 projects for m tech btech ece eee embedded systems@ srcembedded solutions- hyderabad.
web:www.srcembedded.com,
ph-8297 313 858
mail:srcembedded@gmail.com
Smart rack sensor AKCP Inline Power Monitoring
Smart rack sensor AKCP, monitoring power line using existing PDU, integrated with temperature - humidity sensor to install in every rack
Lec1 - Analog and Digital systems
Introduction to Analog and Digital Systems - Basic definition, Representation, Examples and applications of Analog and Digital Systems - Advantages of Digital system over Analog system - Process of conversion from Analog to Digital and Digital to Analog signal - Digitization Examples - Signal representation of voltage and current in terms of Binary values - Representations of Binary quantities using different terminologies - IC Complexity classification - IC Layout - Development of ICs in terms of size
Unit 4
This document discusses various storage and display devices used in instrumentation systems. It describes different types of recorders like analog recorders, digital recorders, and oscillographic recorders that are used to record electrical and non-electrical quantities over time. Magnetic tape and disc recorders, which use magnetic media to store data, are also covered. The document also outlines different types of printers like impact, non-impact, inkjet and laser printers. Additionally, it provides details about CRT displays, LEDs, LCDs and dot matrix displays that are commonly used in instrumentation.
Keynote Speech - Low Power Seminar, Jain College, October 5th 2012
This was the keynote speech I gave in Jain for the Low Power Seminar using Synopsys Tools on October 2012
6.4.3comparison2
The document compares features of digital and analogue meters. Digital meters are slower than analogue meters due to electronic conversion, but are less susceptible to electrical noise. They provide correct polarity readings while analogue meters may damage if polarity is incorrect. Some digital meters may display irregular least significant digit changes, while analogue meter readings depend on damping mechanism stability.
Power electronics embedded power system vlsi l abview titles
The document discusses several topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI circuits. Specifically, it provides summaries of recent projects related to voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, and improved DC-DC converters. It also lists project ideas involving power quality improvement, reactive power compensation, and automatic load shedding schemes. Additional sections outline embedded system projects involving wireless monitoring, water quality monitoring, and motor control. Application areas for LabVIEW include online control of robots and remote experimentation. Image processing projects involve tasks like video object extraction, tracking, and defect detection. The final section lists recent
Latest Digital Electronic Projects
We provide you the Latest Digital Electronic Projects for Electronics Engineering Students. You can choose the best of your choice and interest from the list of topics we suggested. All new project ideas that are appearing focuses to improve the knowledge of Engineering students.
https://www.elprocus.com
Visit our page to get more ideas on Latest Digital Electronic Projects for Electronics Engineering Students these ideas developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Simple electronic dark detector or sensor circuit using ldr
This document describes a simple dark detector circuit using an LDR (light dependent resistor) that can act as a mini police alarm. The circuit uses an LDR, resistor, transistor and a buzzer or LED to create a sensor that will sound an alarm if the LDR is exposed to darkness, indicating an intrusion has been detected. The circuit requires a 6-9V DC power source and creates a simple intruder alert system with few components.
EPC Solutions Lighting Solutions
EPCS's street lighting solution gives you the capability to remote monitor, and control street lights, in a fail-proof way. The solution has Internet connectivity in order to upload data to cloud application, to enable remote monitoring. The data can be accessed from smart phones as well. The solution allows you to schedule the different operations of light, according to time of day. This helps in minimizing human interference with daily operations. The solution maintains historical data in order to help you make informed business decisions based on consumption patterns.
Automated Lit-Green LED Street Light Solution
Key benefits
• Control street lights at feeder level or individual level.
• Reduce your electricity bill by up to 30%.
• No additional cost of wiring.
• Find faulty lights.
• Schedule feature for ON / OFF / DIM.
• Measure the electricity consumption and associated theft / faults.
• ON / OFF control for
o Single lighting panels
o Multiple fixture panels
• Centralized monitoring and control of lights.
• Integration with existing SAP / ERP system.
• Customized solutions are available as per requirement from design to delivery for OEMs.
Automated street lighting solution (feeder level automation)
Key benefits
• Control multiple street lights from single feeder for either single or multiple phases.
• Timely ON / OFF schedule that can be monitored and changed via SMS.
• Get alerts in case of theft / fault in the lights.
• Reduce your electricity bill by up to 30%.
• Centralized monitoring and control of lights with reporting.
• Get current readings and device fault details on SMS.
• Get detailed electricity consumption reports.
• Specially tailored solutions to match your requirements, from design to delivery for OEMs.
Application areas
• Street lighting
• IT campus lighting
• Parks
• Townships
• Bridges and tunnels
• Hazardous locations
• Industrial lighting
• Mines
• Pathway / Roadway
• Warehouse / Parking Lot
Battery level Indicator Circuit
It is a battery level indicator program which tells the level of the battery how much it is charged. It includes the proteus pics of the program. I tells the working of the circuit.
IoTPresentation2 (1)
The document discusses security challenges for Internet of Things (IoT) devices with limited energy and computational resources. It outlines three main threats to IoT security: confidentiality, integrity and availability. Approaches to address energy concerns, like improving batteries or harvesting ambient energy, are limited. Conventional cryptography is also unsuitable due to the requirements for code space, memory and power. The document proposes reusing existing security functions and being selective about transmissions as potential solutions to enable more energy-efficient security for low-power IoT devices.
smart street light ppt
The document presents a smart street light system that uses sensors to detect vehicles and adjusts street light brightness accordingly to save energy. It aims to reduce wasted energy by turning lights off when no vehicles are present. The system uses IR sensors to detect vehicles, microcontrollers to control LED street lights, and PWM technique to dim lights to 10% intensity between vehicles. It is presented as an energy efficient and cost effective alternative to existing street light technologies.
Smart gprs/gsm
This document provides an overview and specifications for a single phase smart GPRS/GSM meter. It includes the following key points:
1) The meter is designed for residential consumers in both urban and rural areas, with a rated voltage of 230V and maximum current of 5(60)A.
2) Communication is enabled via GPRS/GSM modules using protocols like DLMS TCP/IP and optical ports for local communication.
3) The meter measures active energy import and export, and provides load profile data and billing information with 12 months of billing history storage.
4) Specifications include accuracy class, voltage and frequency ranges, measurement functions, communication protocols and GPRS modem details.
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Digital Electronics circuits are those which operate with digital signals. These are discrete signals which are sampled from analog signal. Digital circuits use binary notation for transmission of signal. Copy the link given below and paste it in new browser window to get more information on Advantages and Disadvantages of Digital Electronics:-
http://www.transtutors.com/homework-help/electrical-engineering/digital-electronics/advantages-disadvantages/
2013 IEEE eee hard ware projects
This document provides information about various academic projects related to embedded systems and electrical engineering. It lists 30 projects focused on areas like power electronics, power systems, renewable energy, and various applications. Each project listing includes a title, brief description, and estimated cost. It also provides contact information for anyone seeking further details about the projects.
What's hot (18)
Automatic power failure indicator to eb sub station
Automatic power failure indicator to eb sub station
Keynote Speech - Low Power Seminar, Jain College, October 5th 2012
Keynote Speech - Low Power Seminar, Jain College, October 5th 2012
Power electronics embedded power system vlsi l abview titles
Power electronics embedded power system vlsi l abview titles
Simple electronic dark detector or sensor circuit using ldr
Simple electronic dark detector or sensor circuit using ldr
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Advantages and Disadvantages of Digital Electronics | Electrical Engineering
Viewers also liked
High voltage fuse blown indicator with automatic fuse roll system
The document describes a high voltage fuse blown indicator with an automatic fuse roll system. The system aims to automatically replace blown fuses on the secondary side of transformers to avoid delays from manual recovery. It will attempt to replace blown fuses up to two times for temporary faults before alerting the substation of a potential permanent fault. The automatic recovery system reduces manual work and delays compared to traditional fuse recovery methods.
Principle of management
This document outlines key concepts in management principles as defined by various experts. It discusses definitions of management, the nature and scope of management, management functions including planning, organizing, staffing, directing and controlling. It also covers the importance of management and principles of management according to experts like Fayol and Taylor. Additionally, it discusses levels of management, classification of decisions, steps in decision making, and techniques for decision making.
Skin tone based steganography
This is the slides for the seminar on skin tone based steganography.
By GIRISH RAM M, TKM COLLEGE OF ENGINEERING KOLLAM
Fault tolerance techniques for real time operating system
This document discusses fault tolerance techniques for real-time operating systems. It covers techniques for memory management, kernel considerations, process and thread management, scheduling, and I/O management. The key techniques discussed include redundancy, error correcting code memory, event logging, static scheduling tables, and replication to allow real-time operating systems to continue operating reliably in the presence of faults and failures. The goal of these techniques is to ensure safety-critical systems can meet all requirements and avoid catastrophes even if faults occur.
Differentiate between 2G, 3G, 4G,5G with Pros and Cons
I had done a brief comparison in my course wireless Networks In this I had reviewed all generation with their advatages and limitations.
Gsm based campus display system project report
Here are the key steps in the information transfer process for this GSM-based campus display system:
1. An authorized user sends an SMS from their mobile phone to the GSM modem connected to the system.
2. The GSM modem receives the SMS via the cellular network.
3. The microcontroller connected to the GSM modem reads the incoming SMS.
4. The microcontroller validates the sender's mobile number to check if they are authorized.
5. If authorized, the microcontroller extracts the message content from the SMS.
6. The microcontroller then encodes/converts the message into a format suitable for display on the LCD.
7. The microcontroller interfaces with
Distribution channel of pantene
This document discusses the distribution channel of Pantene shampoo in India. It begins by introducing Pantene and its brand ambassador. It then outlines Pantene's distribution model which involves factories distributing to regional stockists who sell to wholesalers and retailers. The basic call procedure for sales executives is also described. It also provides the distribution model of Pantene's competitor Sunsilk shampoo. Finally, it compares the two models and notes complaints retailers have about Pantene's model.
WORKING AND PROGRAMMING OF KUKA ROBOT
The document discusses the components, control system, and programming of KUKA robots, including the control panel, robot controller, mechanical construction with 6 axes of movement, coordinate systems, setup procedures like mastering and tool calibration, applications for welding and milling, and programming motion using linear and circular paths.
Witricity PPT
The seminar presentation discussed wireless power transmission using WiTricity technology. There are three types of wireless power that differ in range and transfer method: short range uses inductive coupling, medium range uses resonant induction, and long range uses electromagnetic waves. WiTricity provides wireless power transfer through resonant magnetic fields that can penetrate obstacles and is safe for living beings. The technology could make devices more convenient by eliminating power cords and batteries, and more environmentally friendly by reducing disposable battery usage.
MY PROJECT-automatic load sharing of transformer by using GSM tecnique.
This document summarizes a student project on automatic load sharing of transformers using GSM technique. The objectives are to protect domestic and power transformers from overload by sharing the load between two parallel transformers when the load increases above a threshold. A PIC microcontroller monitors the current and voltage, and controls relays to disconnect one or both transformers if the load is too high. It can also send load information via text message using a GSM modem. The circuit includes transformers, rectifiers, regulators, relays, current and voltage measurement circuits connected to the PIC microcontroller. This helps prevent overheating, increases transformer life, and acts as an uninterruptible power supply.
Smart dust
Smart dust consists of sensor-laden computer nodes that are just cubic millimeters in size. The Smart Dust project at Berkeley aims to incorporate sensing, communication, computing and power supply capabilities into nodes that are only a few cubic millimeters in volume. These nodes, called "smart dust", use MEMS technology and could potentially be small enough to float in air currents while sensing and communicating for hours or days. The goal is to create a massively distributed wireless sensor network using tiny smart dust nodes that are the size of grains of sand and contain sensors, computation, communication and a power supply.
Gi fi Technology
Gi-Fi (Gigabit Wireless) is a new wireless technology that can transfer data at up to 5 gigabits per second, which is 10 times faster than current wireless technologies. It uses 60GHz frequency and can transfer large files like HD videos within a 10 meter range. Gi-Fi aims to provide higher data transfer rates than Bluetooth and Wi-Fi at lower power consumption. It uses small antennas and works best with line of sight. Applications include wireless connectivity between devices in homes and offices for applications like streaming HD content, high-speed inter-vehicle communication, and more. Gi-Fi is expected to become the dominant wireless technology for networking within five years.
wireless electricity ppt presentation by Ashish raj sahu 1112232015 (uptu)
The presentation discusses the history and techniques of wireless electricity transmission. It describes Nikola Tesla's early experiments with wireless power in the 1890s using resonant inductive coupling. More recently, MIT researchers demonstrated mid-range wireless power transfer using coupled resonator theory, achieving 43% efficiency over 2 meters. Applications could include wirelessly charging electric vehicles and powering devices without batteries. Long-range microwave transmission could one day transmit solar power from satellites to Earth. While promising, wireless power faces challenges of efficiency over distance, health concerns, and high implementation costs.
Aqua silencer ppt
This document describes an Aqua Silencer device that is fitted to vehicle exhaust pipes to reduce noise and air pollution. It consists of a perforated tube inside a water container, surrounded by activated charcoal. Exhaust gases enter the tube and are broken into smaller bubbles before passing through the charcoal. Pollutants like CO, NOx, and SO2 can be dissolved in the water or absorbed by the charcoal. The treated exhaust gases then exit through an opening while treated water is drained periodically. The Aqua Silencer provides pollution control through bubbling the exhaust in water and using charcoal absorption, helping reduce harmful emissions in a cheap and effective way.
Gi fi seminar Report
Gi-Fi is a new wireless technology that offers faster data transfer rates than Wi-Fi and WiMax. It uses 60GHz frequency and can transfer data at rates up to 5 gigabits per second, which is 10 times faster than current wireless technologies. Gi-Fi uses an integrated transceiver chip developed in Australia that operates at low power. It allows quick transfer of large files like videos within seconds over short ranges. Gi-Fi is expected to become the dominant wireless technology for applications like wireless home networks and high-speed transfer between devices.
Nestle Case Study
This document provides an overview of Nestle, including:
- A brief history of Nestle's founding in Switzerland in 1867 and its growth into a global food company.
- Details on Nestle's operations and factories in Malaysia since 1912 and commitment to providing quality products to Malaysians.
- An outline of Nestle's organizational structure, functional departments, and application of Fayol's management principles including planning, organizing, leading, and controlling.
- An explanation of Nestle's motivational strategies for employees including benefits, rewards, training opportunities, and democratic leadership style that encourages communication.
Artificial retina using thin film transistor report
The document describes an artificial retina that uses thin-film photodiodes and poly-silicon thin-film transistors. It is fabricated on transparent and flexible substrates to mimic the functions of a natural retina. The artificial retina achieves edge enhancement through a circuit design that processes signals from the photodiodes through current mirrors and load resistances. It can be implanted inside the eye through either epiretinal or subretinal implantation methods to help restore sight for those who have lost vision due to retinal damage or disease.
Ecg Signal Processing
This document discusses ECG signal processing. It begins with an introduction to electrocardiograms and how they differ from EKGs. It then discusses how signal processing is important for ECGs and how ECGs operate based on three pulse waves. MATLAB functionality for ECG signal processing like FFTs and filtering is also covered. The document discusses various types of artefacts and noise sources that affect ECG signals. It outlines the objectives and methods of research which involve R-peak detection and notch filtering. Source code for these methods is also provided.
Wireless power theft monitoring
This document proposes a microcontroller-based wireless power theft monitoring system. The system uses wireless sensor nodes connected to consumers, transformers, and transmission lines to monitor power usage. If differences are detected between measured and reported usage, it could indicate power theft. The system aims to reduce energy wastage and theft by detecting where illegal usage occurs and notifying authorities. Some limitations are an inability to identify exact theft locations or individuals, and potential challenges implementing on a large scale.
Power transmission in Automobiles
The transmission system transmits power from an automobile's engine to the rear driving wheels. It includes components like the clutch, gearbox, propeller shaft, differential, and rear axle. The clutch connects and disconnects the engine from the rest of the drivetrain. The gearbox uses different gear ratios to change the speed and torque delivered to the propeller shaft. The propeller shaft then transmits power to the differential, which uses planet gears to allow the rear wheels to rotate at different speeds while driving. The transmission system allows the vehicle to be driven at varying speeds and torque levels.
Viewers also liked (20)
High voltage fuse blown indicator with automatic fuse roll system
High voltage fuse blown indicator with automatic fuse roll system
Fault tolerance techniques for real time operating system
Fault tolerance techniques for real time operating system
Differentiate between 2G, 3G, 4G,5G with Pros and Cons
Differentiate between 2G, 3G, 4G,5G with Pros and Cons
MY PROJECT-automatic load sharing of transformer by using GSM tecnique.
MY PROJECT-automatic load sharing of transformer by using GSM tecnique.
wireless electricity ppt presentation by Ashish raj sahu 1112232015 (uptu)
wireless electricity ppt presentation by Ashish raj sahu 1112232015 (uptu)
Artificial retina using thin film transistor report
Artificial retina using thin film transistor report
More from Ecwayt
Covering points of interest with mobile sensors
Ecway Technologies provides IEEE projects and software developments from its offices located in multiple cities across Tamil Nadu, India. The company's website and contact information is provided.
The document discusses an algorithm for autonomously deploying mobile sensors to cover predefined Points of Interest while maintaining connectivity. Each sensor moves toward a Point of Interest but also maintains connectivity with a subset of neighboring sensors as part of a Relative Neighborhood Graph, minimizing the number of sensors used for connectivity and maximizing the number available for monitoring. Analytical results, simulations, and practical implementation demonstrate the efficiency of the algorithm.
Coloring based inter-wban scheduling for mobile wireless body area networks
This document describes a study on inter-WBAN scheduling for mobile wireless body area networks. The study proposes a random incomplete coloring algorithm with low time complexity and high spatial reuse to overcome interference between wireless body area networks. Simulation results show that the proposed coloring algorithm effectively overcomes inter-WBAN interference and supports higher system throughput in various mobile WBAN scenarios compared to conventional coloring methods.
Code modulation based encryption & decryption technique for secure communicat...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. At the transmitter, data typed into a PC is encrypted using the microcontroller and transmitted via RF. At the receiver, the encrypted data is received, decoded by the microcontroller, and displayed on the PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. The block diagram shows the transmitter components include an encoder, microcontroller, MAX232, and RF transmitter. The receiver components include a decoder, microcontroller, MAX232, and RF receiver.
Clustering sentence level text using a novel fuzzy relational clustering algo...
Ecway Technologies is a software development company with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The paper presents a novel fuzzy clustering algorithm that operates on relational input data in the form of a pairwise similarity matrix between objects. The algorithm uses a graph representation and models centrality as likelihood in an Expectation-Maximization framework. Results show the algorithm can identify overlapping clusters of semantically related sentences, demonstrating potential use in text mining tasks. It was also applied successfully to benchmark datasets in other domains.
Clustering large probabilistic graphs
This document summarizes a study on clustering probabilistic graphs. The study extends the definition of graph clustering to probabilistic graphs by establishing a connection between the objective function and correlation clustering. This allows the development of practical approximation algorithms. The methods can discover the correct number of clusters in a probabilistic protein-protein interaction network and identify established protein relationships. The techniques also proved practical on a large social network of one billion edges.
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
This paper presents a smart driving direction system that leverages taxi drivers' intelligence and experience. GPS-equipped taxis act as mobile sensors to model the dynamic traffic patterns of a city. A time-dependent landmark graph models traffic patterns and experienced drivers' route choices to provide users with the practically fastest route to a destination at a given departure time. A clustering approach estimates travel times between landmarks in different time slots. A two-stage routing algorithm then computes a customized, practically fastest route for the user based on this graph and real-world trajectory data from over 33,000 taxis over three months. Evaluation found that 60-70% of routes suggested were faster than alternatives, with 20% sharing results, and on average routes
Cloudsim ranking on data manifold with sink points
ECWAY Technologies provides IEEE projects and software development services from its offices in multiple cities across India. The document discusses a novel ranking approach called Manifold Ranking with Sink Points (MRSP) that addresses diversity, relevance, and importance in ranking. MRSP uses manifold ranking over a data manifold to find the most relevant objects while turning already ranked objects into "sink points" to prevent redundant objects from receiving a high rank. Experimental results on update summarization and query recommendation tasks show MRSP performs strongly compared to existing ranking approaches by better addressing the importance of diversity in ranking.
Cloudsim quality-differentiated video multicast in multirate wireless networks
This document describes a quality-differentiated video multicast scheme for multirate wireless networks called QDM. QDM aims to provide heterogeneous clients with differentiated video qualities matching their channel conditions. It first proposes a rate scheduling model to select the optimal transmission bitrate for each video frame to maximize total visual quality subject to minimum quality guarantees. It then presents QDM, a practical protocol that constructs a cluster-based structure to characterize heterogeneity and adapts transmission rates based on video quality perceived by representative cluster heads. Simulation results show QDM can efficiently adapt to network dynamics and variable video bitrates, producing a 2-5 dB gain in average video quality over leader-based approaches.
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
The document proposes a power allocation scheme for statistical quality-of-service provisioning in multi-relay cognitive networks. The scheme first chooses between direct transmission or relay transmission based on channel state information. It then performs efficient power allocation according to the transmission mode under average transmit power constraints, interference power constraints, and a peak interference constraint to meet quality-of-service requirements. Simulations show the proposed scheme outperforms max-min criterion and equal power allocation policies by achieving higher throughput while involving at most two relays for transmission.
Cloudsim distributed web systems performance forecasting using turning bands...
The document discusses using the Turning Bands method to forecast the performance of distributed web systems. Real-life data was obtained from an experiment monitoring a group of web servers worldwide using an agent system called MWING located in different parts of Poland. The results showed good quality in predicting web performance when European web servers were monitored from an agent in Gliwice, Poland using the Turning Bands method.
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
This document summarizes a paper on distributed processing of probabilistic top-k queries in wireless sensor networks. It introduces the concepts of sufficient and necessary sets, which can facilitate localized data pruning in clusters. It then describes three algorithms - sufficient set-based, necessary set-based, and boundary-based - for intercluster query processing with bounded communication rounds. Finally, it presents an adaptive algorithm that dynamically switches between the three algorithms to minimize transmission cost, and experimental results showing the algorithms significantly reduce data transmission with small constant communication rounds, with the adaptive algorithm performing near-optimally under various conditions.
Civil 2013 titles
This document contains 15 titles for civil engineering projects related to structural analysis. The titles cover topics like analyzing beams, trusses, bridges, dams, and other structures under different loads and conditions using methods like finite element analysis. The analyses will determine factors like deflection, stresses, and dynamic response for various civil and building components.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit uses MOSFETs to vary the voltage applied to the motor, allowing for remote speed control. This method is more efficient and compact than previous variable resistor and transformer-based controls. Pressing buttons on the chopper circuit varies the MOSFET firing angle, decreasing motor speed as the firing angle increases. The chopper control reduces motor current, losses, temperature, noise, and increases lifetime compared to DC operation.
Channel assignment for throughput optimization in multichannel multiradio wir...
ECWAY Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The document discusses a channel assignment algorithm for throughput optimization in multi-radio wireless mesh networks using network coding. It formulates the joint problem of random network coding, channel assignment, and broadcast link scheduling while taking into account opportunistic overhearing, interference constraints, coding constraints, number of channels, radios per node, and fairness between unicast connections. An auction-based suboptimal solution is developed for overall network throughput optimization. Evaluation shows the algorithm can effectively use multiple radios and channels and handle fairness issues from auctions, with promising gains over traditional routing solutions
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
The document discusses channel allocation and routing in hybrid multichannel multiradio wireless mesh networks. It proposes an Adaptive Dynamic Channel Allocation (ADCA) protocol that considers both throughput and delay optimization in channel assignment. It also proposes an Interference and Congestion Aware Routing (ICAR) protocol for hybrid networks with static and dynamic links that balances channel usage. Simulation results show that ADCA reduces packet delay significantly without degrading throughput, and the hybrid architecture adapts better to changing traffic than static-only architectures with lower overhead and delay than existing hybrid network approaches.
Casual stereoscopic photo authoring
Ecway Technologies provides IEEE projects, software developments, and casual stereoscopic photo authoring. It has offices in multiple cities across India. Ecway's casual stereoscopic photo authoring method takes two images or video frames from a regular monocular camera as input and transforms them into a stereoscopic image pair for 3D viewing. The method uses a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. It formulates the warping problem as a quadratic energy minimization solved using a sparse linear solver. The method also allows local and global disparity adjustments for adapting stereoscopic images to different viewing conditions. Experiments show Ecway's spatially-varying war
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Capacity of hybrid wireless mesh networks with random a ps
This paper proposes a hybrid wireless mesh network (WMN) architecture that allows the backbone to utilize random connections to access points (APs) in a wireless local area network (WLAN). Theoretical analysis shows that the capacity of a three-tier hybrid WMN is affected by the number of mesh router cells connected to APs, the ratio of access link bandwidth to backbone link bandwidth, and traffic balance among routers with AP access. Simulation results demonstrate that configuring APs and balancing traffic can significantly improve network capacity in the proposed hybrid architecture by taking advantage of wired connections through APs.
Bomb detection robot with wireless camera
This prototype robot is designed to help bomb squads by remotely detecting bombs and obstacles. It uses sensors to detect metals and obstacles as it moves through an area, sending that information back to operators via a wireless camera and computer. The robot is controlled remotely using the camera feed while sensors transmit detection data to a base station, which displays the information and sounds an alarm if metals are found.
Bed side patients monitoring system with emergency alert
The document describes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit. The unit contains a microcontroller, sensor board, and processing system to manage information, analyze data in real-time, and provide warnings for emergencies or abnormal diagnoses. The system takes a patient's temperature, converts it to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold, the system sounds a buzzer for notification.
More from Ecwayt (20)
Coloring based inter-wban scheduling for mobile wireless body area networks
Coloring based inter-wban scheduling for mobile wireless body area networks
Code modulation based encryption & decryption technique for secure communicat...
Code modulation based encryption & decryption technique for secure communicat...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim ranking on data manifold with sink points
Cloudsim ranking on data manifold with sink points
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Capacity of hybrid wireless mesh networks with random a ps
Capacity of hybrid wireless mesh networks with random a ps
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
High voltage fuse blown indicator with voice based announcement system
- 1. HIGH VOLTAGE FUSE BLOWN INDICATOR WITH VOICE BASED ANNOUNCEMENT SYSTEM ABSTRACT Now-a-days technology has developed to a large extend. At the same time the need for systems with automation and high security are preferred. In this project we are indicating high voltage and low voltage of loads by using voice IC. In this project for demo purpose we are using two bulbs as loads. We are using current sensor to sense current consumed by loads and ADC is to convert analog signal into digital. That converted data is given to microcontroller.MC checks whether current values increases from its threshold level or not. If so, then it gives voice announcement by using speaker. BLOCK DIAGRAM