1. The document discusses an Earth Tube Heat Exchanger system that uses geothermal energy for heating and cooling buildings. It can draw heat from the ground to warm a building in winter and release heat into the ground to cool a building in summer.
2. The system was analyzed using theoretical calculations and CFD simulations in ANSYS Fluent software. Key parameters like pipe diameter and air velocity were varied to analyze their effects on the system's coefficient of performance.
3. Modifying parameters like increasing pipe diameter and air velocity were found to have the most significant impact on improving the system's coefficient of performance. The Earth Tube Heat Exchanger provides an efficient alternative to conventional HVAC systems by making use of
Novel technique for maximizing the thermal efficiency of a hybrid pveSAT Journals
Abstract In this paper a comparison between numerical model and experimental work results for a fixed Photovoltaic/ Thermal (PV/T) hybrid system is presented. The simulation in this work is based on a numerical model in solving the equations and determining the Photovoltaic (PV) cells thermal characteristics using both MATLAB and COMSOL Multiphysics. COMSOL is simulating the electromagnetic waves produced by the Sun through solving Maxwell's equations in three dimensions using Finite Elements Methods (FEM) and the sun irradiance is assumed to be Gaussian distribution across the twelve mourning hours. Beside that an experimental work is presented depending on the results conjured from the theoretical experience used in Comsol Multiphysics. A Pulse Width Modulator (PWM) is used to control the solenoid valve operation. In addition to the above a thermal analysis for the fixed PV modules and the piping water is presented where the output water temperatures, rate of heat transfer, overall heat transfer coefficient and thermal efficiency are calculated. As a result, a significant enhancement in the total thermal efficiency is observed with acceptable increase in the output water temperature. Keywords: Cooling systems; DAQ; Hybrid; COMSOL MULTIPHYSICS; MATLAB; Solid work; Lab view.
Analysis of an HVAC System and Operation for Retro Fit Building with IOT Inte...ijtsrd
This thesis will describe the basic concepts of Energy efficient Retro fit building and discusses the role of HVAC for ensuring high performance sustainable buildings in design and operation along with the application of IOT with weather forecasting data and smart grid technique in HVAC system. At the End, we also provide use of renewable source of energy i e Solar Energy for providing electricity to HVAC system for making the building more energy efficient. Energy is very important part of both growth and development, but as the world’s energy consumption is increasing day by day and expected to increase by 30 to 35 by 2010 2030, which lead to the energy crisis and challenges to the human development in this 21st century. This problem can be overcome by improving efficiency in commercial, residential and industrial sector, leading to high focus in energy efficient building. The building accounts for 40 of the world’s energy consumption, the industrial sector, which consist of building, machines, process and loading accounts for 35 of the world’s energy consumption. Industrial buildings are indicating increasing rates of energy consumption, with heating, ventilation, and air conditioning HVAC usually constituting over 50 of this consumption. Industrial buildings thus have great potential for reducing both energy requirements and environmental impact, but reducing their energy consumption could also affect cost savings that would play an important role in commercial success. At last with application of the IOT Internate Of Things in schedule activities based on weather forecasting and more in HVAC system, Safety will increase along with the more reduction in cost and energy consumption with clients end to end satisfaction in service and maintenance. This paper will describe the basic concepts of green building and discusses the role of heating, ventilating and air conditioning HVAC for ensuring high performance, energy efficient in design and operation for Retro fit buildings. The design strategies for effective and green HVAC systems are explained and the new emerging HVAC technologies incorporated with IOT for green buildings are described. The use of Solar panel is also provided at the end to have a better and depth understanding of the project in terms of socio economic zone. It is hoped that HVAC designers and other building professionals could develop a better understanding of green buildings and apply effective approaches and techniques for meeting the goal. With an integrated and high effort approach to HVAC and building design, a viable built environment can be achieved and the eco friendly performance of buildings can be improved. Irfan Ali | Rone | Nausad Khan "Analysis of an HVAC System & Operation for Retro-Fit Building with IOT (Internate of Things) & Solar Panel for Energy Efficient Application" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 202
Novel technique for maximizing the thermal efficiency of a hybrid pveSAT Journals
Abstract In this paper a comparison between numerical model and experimental work results for a fixed Photovoltaic/ Thermal (PV/T) hybrid system is presented. The simulation in this work is based on a numerical model in solving the equations and determining the Photovoltaic (PV) cells thermal characteristics using both MATLAB and COMSOL Multiphysics. COMSOL is simulating the electromagnetic waves produced by the Sun through solving Maxwell's equations in three dimensions using Finite Elements Methods (FEM) and the sun irradiance is assumed to be Gaussian distribution across the twelve mourning hours. Beside that an experimental work is presented depending on the results conjured from the theoretical experience used in Comsol Multiphysics. A Pulse Width Modulator (PWM) is used to control the solenoid valve operation. In addition to the above a thermal analysis for the fixed PV modules and the piping water is presented where the output water temperatures, rate of heat transfer, overall heat transfer coefficient and thermal efficiency are calculated. As a result, a significant enhancement in the total thermal efficiency is observed with acceptable increase in the output water temperature. Keywords: Cooling systems; DAQ; Hybrid; COMSOL MULTIPHYSICS; MATLAB; Solid work; Lab view.
Analysis of an HVAC System and Operation for Retro Fit Building with IOT Inte...ijtsrd
This thesis will describe the basic concepts of Energy efficient Retro fit building and discusses the role of HVAC for ensuring high performance sustainable buildings in design and operation along with the application of IOT with weather forecasting data and smart grid technique in HVAC system. At the End, we also provide use of renewable source of energy i e Solar Energy for providing electricity to HVAC system for making the building more energy efficient. Energy is very important part of both growth and development, but as the world’s energy consumption is increasing day by day and expected to increase by 30 to 35 by 2010 2030, which lead to the energy crisis and challenges to the human development in this 21st century. This problem can be overcome by improving efficiency in commercial, residential and industrial sector, leading to high focus in energy efficient building. The building accounts for 40 of the world’s energy consumption, the industrial sector, which consist of building, machines, process and loading accounts for 35 of the world’s energy consumption. Industrial buildings are indicating increasing rates of energy consumption, with heating, ventilation, and air conditioning HVAC usually constituting over 50 of this consumption. Industrial buildings thus have great potential for reducing both energy requirements and environmental impact, but reducing their energy consumption could also affect cost savings that would play an important role in commercial success. At last with application of the IOT Internate Of Things in schedule activities based on weather forecasting and more in HVAC system, Safety will increase along with the more reduction in cost and energy consumption with clients end to end satisfaction in service and maintenance. This paper will describe the basic concepts of green building and discusses the role of heating, ventilating and air conditioning HVAC for ensuring high performance, energy efficient in design and operation for Retro fit buildings. The design strategies for effective and green HVAC systems are explained and the new emerging HVAC technologies incorporated with IOT for green buildings are described. The use of Solar panel is also provided at the end to have a better and depth understanding of the project in terms of socio economic zone. It is hoped that HVAC designers and other building professionals could develop a better understanding of green buildings and apply effective approaches and techniques for meeting the goal. With an integrated and high effort approach to HVAC and building design, a viable built environment can be achieved and the eco friendly performance of buildings can be improved. Irfan Ali | Rone | Nausad Khan "Analysis of an HVAC System & Operation for Retro-Fit Building with IOT (Internate of Things) & Solar Panel for Energy Efficient Application" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 202
Enhancement of the output power generated from a hybrid solar thermal systemeSAT Journals
Abstract This paper investigates the output power and increased the efficiency of a hybrid Photovoltaic/ Thermal (PV/T) modules through utilizing the heat generated from the surface of panels by one axial tracking of the hybrid PV/Tsystem by means of zenith angle and decreasing the heat generated from the PV modules by controlling the flow rate of the system. A comparison between theoretical and experimental work results for fixed and tracking PV/T hybrid system is presented. Comsol software package used to simulate the electromagnetic waves produced by the sun through solving Maxwell's equations in three dimensions and the sun irradiance is assumed to be Gaussian distribution across the twelve mourning hours. Beside that an experimental work is presented depending on the results conjured from the theoretical experience used in Comsol Multiphysics In the second part of the experimental work, one axial sun-tracking system is designed where the movement of a photo-voltaic module is controlled to follow the Sun’s radiation using a Data acquisition card (DAQ) unit. Finally an active cooling system is designed and conducted to cool the fixed and tracking modules at which an absorber system consists of copper pipe welded with aluminium plate is attached underneath the PV modules to allow water flowing below the modules. In addition to the above an electrical analysis for both systems are presented where I-V, P-V, power with 12 mourning hour’s and electrical efficiency. Beside that the thermal analysis for the fixed and tracking PV modules and the piping water are presented where the input, output temperatures, the total energy of heat losses and thermal efficiency are calculated. As a result, a significant enhancement in the total electrical efficiency is observed with acceptable increase in the output water temperature. Keywords: Cooling systems; DAQ; Hybrid; Comsol Multiphysics; Mat lab; Solid work; Lab view.…
Air Water System Design using Revit Mep for a Residential Buildingijtsrd
In this project we discussed the study and performance of air conditioner, air refrigeration and water conditioner system in a single unit. The main objective of this project is to develop the multifunctional system which can provide refrigeration effect, cold water and air conditioning effect with in regular air or space conditioning system. Air and water systems conditioning spaces by distributing the both conditioned air and water to the terminal units installed in the spaces for which the basic plan is given by civil department and the basic design is done by using REVIT MEP software. The air and water are heated or cooled in a central mechanical equipment room. The air supplied is termed as primary air to distinguish it from the recirculated or secondary room air. By using the peak cooling load values obtained in the heating and cooling load calculations the ton of refrigeration values for individual and total area is calculated which will be helpful for selection of accurate design for the residential building. B. Shushma | M. Uday Bhaskar | N. Balaji | G. Srujan Yadav ""Air-Water System Design using Revit Mep for a Residential Building"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23314.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23314/air-water-system-design-using-revit-mep-for-a-residential-building/b-shushma
Design of an Air Distribution System for a Multi Storey Office Buildingijtsrd
Earlier the use of air conditioning for comfort purpose was considered to be expensive, but now a day, it has been a necessity for all human beings. Window air conditioners, split air conditioners are used in small buildings, offices etc. But, when the cooling load required is very high such as big buildings, multiplex, multi story buildings, hospitals etc. centralized unit central air conditioners used. The central ACs systems are installed away from building called central plant where water or air is to be cooled. This cooled air not directly supplied to the building rooms. When the cooled air cannot be supplied directly from the air conditioning equipment to the space to be cooled, then the ducts are provided. The duct systems carry the cooled air from the air conditioning equipment for the proper distribution to rooms and also carry the return air from the room back to the air conditioning equipment for recirculation. When ducts are not properly designed, then it will lead to problem such as frictional loss, higher installation cost, increased noise and power consumption, uneven cooling in the cooling space. For minimizing this problem, a proper design of duct is needed. Equal friction method is used to design the duct, which is simple method as compared with the other design methods. These work gives the combination of theoretical and software tool to provide a comparative analysis of the duct size. It also gives the comparison between rectangular duct and circular duct. M. Pruthvi Raj | K. Prashanth Reddy | Mussan Shankar Reddy | B. Kranthi Kumar ""Design of an Air Distribution System for a Multi Storey Office Building"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23319.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23319/design-of-an-air-distribution-system-for-a-multi-storey-office-building/m-pruthvi-raj
DIRECT EXPANSION GROUND SOURCE HEAT PUMPS FOR HEATING AND COOLINGIJSIT Editor
This article is an introduction to the energy problem and the possible saving that can be achieved
through improving building performance and the use of ground energy sources. The relevance and
importance of the study is discussed in the paper, which, also, highlights the objectives of the study, and the
scope of the theme. This study discusses some of the current activity in the GSHPs field. The basic system and
several variations for buildings are presented along with examples of systems in operation. Finally, the GCHP
is presented as an alternative that is able to counter much of the criticism leveled by the natural gas industry
toward conventional heat pumps. Several advantages and disadvantages are listed. Operating and installation
costs are briefly discussed.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
The development of solar energy gas coupling system (scada) in buildingseSAT Journals
Abstract The system mainly use wall-mounted gas boiler and give priority in use of solar energy in order to maximize the utilization of solar resources. The excess heat will be added to domestic water when the heat for floor radiant heating is enough. The PLC of Siemens is set as slave computer in the monitoring system and it is used to collect thermal parameters such as temperature, flow rate, etc. by temperature sensors, pressure sensors and flow rate sensors. WinCC is set as the host computer to monitor the operating conditions of the entire system. Real-time tracing, monitoring and alarming function can be achieved based on the SQL database, which has realized archive management of the date. The system has been debugged after the whole experiment platform is completed, and the running state of the system shows that this system has high reliability and good stability. Keywords: Solar Energy, Gas, PLC, WinCC, Database
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Computational Engineering Research(IJCER) ijceronline
nternational Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Enhancement of the output power generated from a hybrid solar thermal systemeSAT Journals
Abstract This paper investigates the output power and increased the efficiency of a hybrid Photovoltaic/ Thermal (PV/T) modules through utilizing the heat generated from the surface of panels by one axial tracking of the hybrid PV/Tsystem by means of zenith angle and decreasing the heat generated from the PV modules by controlling the flow rate of the system. A comparison between theoretical and experimental work results for fixed and tracking PV/T hybrid system is presented. Comsol software package used to simulate the electromagnetic waves produced by the sun through solving Maxwell's equations in three dimensions and the sun irradiance is assumed to be Gaussian distribution across the twelve mourning hours. Beside that an experimental work is presented depending on the results conjured from the theoretical experience used in Comsol Multiphysics In the second part of the experimental work, one axial sun-tracking system is designed where the movement of a photo-voltaic module is controlled to follow the Sun’s radiation using a Data acquisition card (DAQ) unit. Finally an active cooling system is designed and conducted to cool the fixed and tracking modules at which an absorber system consists of copper pipe welded with aluminium plate is attached underneath the PV modules to allow water flowing below the modules. In addition to the above an electrical analysis for both systems are presented where I-V, P-V, power with 12 mourning hour’s and electrical efficiency. Beside that the thermal analysis for the fixed and tracking PV modules and the piping water are presented where the input, output temperatures, the total energy of heat losses and thermal efficiency are calculated. As a result, a significant enhancement in the total electrical efficiency is observed with acceptable increase in the output water temperature. Keywords: Cooling systems; DAQ; Hybrid; Comsol Multiphysics; Mat lab; Solid work; Lab view.…
Air Water System Design using Revit Mep for a Residential Buildingijtsrd
In this project we discussed the study and performance of air conditioner, air refrigeration and water conditioner system in a single unit. The main objective of this project is to develop the multifunctional system which can provide refrigeration effect, cold water and air conditioning effect with in regular air or space conditioning system. Air and water systems conditioning spaces by distributing the both conditioned air and water to the terminal units installed in the spaces for which the basic plan is given by civil department and the basic design is done by using REVIT MEP software. The air and water are heated or cooled in a central mechanical equipment room. The air supplied is termed as primary air to distinguish it from the recirculated or secondary room air. By using the peak cooling load values obtained in the heating and cooling load calculations the ton of refrigeration values for individual and total area is calculated which will be helpful for selection of accurate design for the residential building. B. Shushma | M. Uday Bhaskar | N. Balaji | G. Srujan Yadav ""Air-Water System Design using Revit Mep for a Residential Building"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23314.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23314/air-water-system-design-using-revit-mep-for-a-residential-building/b-shushma
Design of an Air Distribution System for a Multi Storey Office Buildingijtsrd
Earlier the use of air conditioning for comfort purpose was considered to be expensive, but now a day, it has been a necessity for all human beings. Window air conditioners, split air conditioners are used in small buildings, offices etc. But, when the cooling load required is very high such as big buildings, multiplex, multi story buildings, hospitals etc. centralized unit central air conditioners used. The central ACs systems are installed away from building called central plant where water or air is to be cooled. This cooled air not directly supplied to the building rooms. When the cooled air cannot be supplied directly from the air conditioning equipment to the space to be cooled, then the ducts are provided. The duct systems carry the cooled air from the air conditioning equipment for the proper distribution to rooms and also carry the return air from the room back to the air conditioning equipment for recirculation. When ducts are not properly designed, then it will lead to problem such as frictional loss, higher installation cost, increased noise and power consumption, uneven cooling in the cooling space. For minimizing this problem, a proper design of duct is needed. Equal friction method is used to design the duct, which is simple method as compared with the other design methods. These work gives the combination of theoretical and software tool to provide a comparative analysis of the duct size. It also gives the comparison between rectangular duct and circular duct. M. Pruthvi Raj | K. Prashanth Reddy | Mussan Shankar Reddy | B. Kranthi Kumar ""Design of an Air Distribution System for a Multi Storey Office Building"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23319.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23319/design-of-an-air-distribution-system-for-a-multi-storey-office-building/m-pruthvi-raj
DIRECT EXPANSION GROUND SOURCE HEAT PUMPS FOR HEATING AND COOLINGIJSIT Editor
This article is an introduction to the energy problem and the possible saving that can be achieved
through improving building performance and the use of ground energy sources. The relevance and
importance of the study is discussed in the paper, which, also, highlights the objectives of the study, and the
scope of the theme. This study discusses some of the current activity in the GSHPs field. The basic system and
several variations for buildings are presented along with examples of systems in operation. Finally, the GCHP
is presented as an alternative that is able to counter much of the criticism leveled by the natural gas industry
toward conventional heat pumps. Several advantages and disadvantages are listed. Operating and installation
costs are briefly discussed.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
The development of solar energy gas coupling system (scada) in buildingseSAT Journals
Abstract The system mainly use wall-mounted gas boiler and give priority in use of solar energy in order to maximize the utilization of solar resources. The excess heat will be added to domestic water when the heat for floor radiant heating is enough. The PLC of Siemens is set as slave computer in the monitoring system and it is used to collect thermal parameters such as temperature, flow rate, etc. by temperature sensors, pressure sensors and flow rate sensors. WinCC is set as the host computer to monitor the operating conditions of the entire system. Real-time tracing, monitoring and alarming function can be achieved based on the SQL database, which has realized archive management of the date. The system has been debugged after the whole experiment platform is completed, and the running state of the system shows that this system has high reliability and good stability. Keywords: Solar Energy, Gas, PLC, WinCC, Database
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Computational Engineering Research(IJCER) ijceronline
nternational Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.