This document describes the design and analysis of a connecting rod made from aluminum alloy, as an alternative to the existing steel design. It first provides background on connecting rods, including their function in converting reciprocating piston motion to rotational crankshaft motion. It then outlines the objective to design and analyze an aluminum alloy connecting rod using finite element analysis software. Design calculations are shown for cross-sectional properties and buckling load of the existing steel connecting rod design. The document analyzes replacing this existing connecting rod with one made from aluminum alloy.
Design of clutch theory Prof. Sagar a DhotareSagar Dhotare
This covers following points,
Introduction to clutch
Classification
Requirement of good friction clutch
Requirements of material used for friction clutch
Material used for friction clutch
Considerations in Designing a Friction Clutch
Design of Single Disc or Plate Clutch
Design of Multi Disc or Plate Clutch
Design of Cone Clutch
Comparison between Single and Multi Plate Clutch
Comparison between Plate and Cone Clutch
Unit 5- balancing of reciprocating masses, Dynamics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
The various forces acts on the reciprocating parts of an engine.
The resultant of all the forces acting on the body of the engine due to inertia forces only is known as unbalanced force or shaking force.
this project is design of bevel gear box
A Gearbox is a device that used for transmitting power from the Power source to
the output shaft. A gearbox has a set of gears that are enclosed in a casing. The gears are
mounted on shafts which rotate freely about their axis
Design, Analysis and Manufacturing of Braking system for an Universal Terrain...EditorIJAERD
The paper represents the designing, analyzing and fabrication of braking system as well as suspension
system for a Universal terrain vehicle that too being inside the constraints in the Rulebook provided by Rally Car Design
Challenge.
The main idea behind braking system is to design, analyze as well as to simulate the Hydraulic disc type of brakes
installed on a Universal Terrain Vehicle. An UTV as the name suggests is designed to handle a vast variety of terrain
than that of other conventional vehicles. The Braking system which is the most important constraint for handling has
undergone a substantial amount of development in the past. Thus, the topic is focused on designing a form of mentioned
braking system incorporating dynamics of the vehicle with providing optimum performance of the vehicle while
minimizing driver’s efforts.
Parameters like Dynamic weight transfer, Static weight distribution ratio, Pedal force, and etcetera were evaluated to
attain the desired performance. As an UTV has to be stopped or slowed down more often in rough terrains, ability of the
vehicle to stop efficiently and in adequate time becomes imperative. The calipers were selected by using required
calculations and chosen from the systems available in market, the calculations were then validated using CATIA. The
design of Brake Discs were decided using the required calculations and also the caliper mountings on SOLIDWORKS
and will be manufactured later. The component designs are analyzed in ANSYS and checked whether they are compatible
for our vehicle.
DESIGN OF FIXTURE OF CONNECTING ROD FOR BORING OPERATIONijsrd.com
Connecting rod is very important part of engine. It should be accurately machined with the acceptable tolerance. Also the fluctuations of dimensions in work-piece to work piece should be minimum so that it will be easier to assemble in engine. But it has been observed that the required dimensions for the bolt diameter and smaller end diameter for the connecting rod are not continuously achievable by using the existing fixture. The diameters required of the bolts and the smaller end of the said connecting rod are 10±0.05 mm and 24±0.01 mm respectively The aim of this project is to design and development of a new fixture for machining (Boring) operation using designing software's i.e. Pro E and analysis using ANSYS ,which can eliminate the said problems. And the production rate will also increase up to 15% which is quite objective. So for that, a new hydraulic fixture is designed and observed that dimensional accuracy, increased production rate up to 15% and more output per day with boring operation. Which defines process is satisfactory enough and validates the project.
Design, Analysis & Balancing of 5 Cylinder Engine CrankshaftIJMER
The crankshaft is a backbone of internal combustion engine. So the design & analysis is major
aspects to get high power transmission & efficiency. The selection of material is an important parameter
while designing any mechanical component. The material should be high strength & capacity to absorb
the shocks as well as fatigue. The material also have less wear tendency. The crankshaft should be high
torque transmitting capacity. So to achieve these objectives high carbon steel are used for design &
analysis purpose. This paper gives the idea about analysis as well as proper balancing of weights by using
these three materials. The modelling is done by using solid work software & then analysis by using ANSYS
software with Finite Element Analysis (FEA) method. The 5 cylinder engine gives the power stroke at 144
degree angle. By addition of counterweights & modified design these odd cylinders are balanced properly.
The Finite Element Analysis Method is used to determine stress, strains & deflection at most stressed point
which results into failure of shaft. Results obtained from analysis are used during weight optimization. The
Shaft is analyzed using static analysis. For absorbing vibrations proper damping material is used to
achieve the requirement of safe design. The optimization results into reduction of weight as well as cost
Design of clutch theory Prof. Sagar a DhotareSagar Dhotare
This covers following points,
Introduction to clutch
Classification
Requirement of good friction clutch
Requirements of material used for friction clutch
Material used for friction clutch
Considerations in Designing a Friction Clutch
Design of Single Disc or Plate Clutch
Design of Multi Disc or Plate Clutch
Design of Cone Clutch
Comparison between Single and Multi Plate Clutch
Comparison between Plate and Cone Clutch
Unit 5- balancing of reciprocating masses, Dynamics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
The various forces acts on the reciprocating parts of an engine.
The resultant of all the forces acting on the body of the engine due to inertia forces only is known as unbalanced force or shaking force.
this project is design of bevel gear box
A Gearbox is a device that used for transmitting power from the Power source to
the output shaft. A gearbox has a set of gears that are enclosed in a casing. The gears are
mounted on shafts which rotate freely about their axis
Design, Analysis and Manufacturing of Braking system for an Universal Terrain...EditorIJAERD
The paper represents the designing, analyzing and fabrication of braking system as well as suspension
system for a Universal terrain vehicle that too being inside the constraints in the Rulebook provided by Rally Car Design
Challenge.
The main idea behind braking system is to design, analyze as well as to simulate the Hydraulic disc type of brakes
installed on a Universal Terrain Vehicle. An UTV as the name suggests is designed to handle a vast variety of terrain
than that of other conventional vehicles. The Braking system which is the most important constraint for handling has
undergone a substantial amount of development in the past. Thus, the topic is focused on designing a form of mentioned
braking system incorporating dynamics of the vehicle with providing optimum performance of the vehicle while
minimizing driver’s efforts.
Parameters like Dynamic weight transfer, Static weight distribution ratio, Pedal force, and etcetera were evaluated to
attain the desired performance. As an UTV has to be stopped or slowed down more often in rough terrains, ability of the
vehicle to stop efficiently and in adequate time becomes imperative. The calipers were selected by using required
calculations and chosen from the systems available in market, the calculations were then validated using CATIA. The
design of Brake Discs were decided using the required calculations and also the caliper mountings on SOLIDWORKS
and will be manufactured later. The component designs are analyzed in ANSYS and checked whether they are compatible
for our vehicle.
DESIGN OF FIXTURE OF CONNECTING ROD FOR BORING OPERATIONijsrd.com
Connecting rod is very important part of engine. It should be accurately machined with the acceptable tolerance. Also the fluctuations of dimensions in work-piece to work piece should be minimum so that it will be easier to assemble in engine. But it has been observed that the required dimensions for the bolt diameter and smaller end diameter for the connecting rod are not continuously achievable by using the existing fixture. The diameters required of the bolts and the smaller end of the said connecting rod are 10±0.05 mm and 24±0.01 mm respectively The aim of this project is to design and development of a new fixture for machining (Boring) operation using designing software's i.e. Pro E and analysis using ANSYS ,which can eliminate the said problems. And the production rate will also increase up to 15% which is quite objective. So for that, a new hydraulic fixture is designed and observed that dimensional accuracy, increased production rate up to 15% and more output per day with boring operation. Which defines process is satisfactory enough and validates the project.
Design, Analysis & Balancing of 5 Cylinder Engine CrankshaftIJMER
The crankshaft is a backbone of internal combustion engine. So the design & analysis is major
aspects to get high power transmission & efficiency. The selection of material is an important parameter
while designing any mechanical component. The material should be high strength & capacity to absorb
the shocks as well as fatigue. The material also have less wear tendency. The crankshaft should be high
torque transmitting capacity. So to achieve these objectives high carbon steel are used for design &
analysis purpose. This paper gives the idea about analysis as well as proper balancing of weights by using
these three materials. The modelling is done by using solid work software & then analysis by using ANSYS
software with Finite Element Analysis (FEA) method. The 5 cylinder engine gives the power stroke at 144
degree angle. By addition of counterweights & modified design these odd cylinders are balanced properly.
The Finite Element Analysis Method is used to determine stress, strains & deflection at most stressed point
which results into failure of shaft. Results obtained from analysis are used during weight optimization. The
Shaft is analyzed using static analysis. For absorbing vibrations proper damping material is used to
achieve the requirement of safe design. The optimization results into reduction of weight as well as cost
DESIGN AND ANALYSIS OF I.C. ENGINE PISTON AND PISTON-RING USING CATIA AND ANS...IAEME Publication
In this present work a piston and piston ring are designed for a single cylinder four stroke petrol engine using CATIA V5R20 software. Complete design is imported to ANSYS 14.5 software then analysis is performed. Three different materials have been selected for structural and thermal analysis of piston. For piston ring two different materials are selected and structural and thermal analysis is performed using ANSYS 14.5 software. Results are shown and a comparison is made to
find the most suited design.
Design, Analysis and Optimization of Anti-Roll BarIJERA Editor
Vehicle anti-roll bar is part of an automobile suspension system which limits body roll angle. This U-shaped
metal bar connects opposite wheels together through short lever arms and is clamped to the vehicle chassis with
rubber bushes. Its function is to reduce body roll while cornering, also while travelling on uneven road which
enhances safety and comfort during driving. Design changes of anti-roll bars are quite common at various steps
of vehicle production and a design analysis must be performed for each change. So Finite Element Analysis
(FEA) can be effectively used in design analysis of anti-roll bars. The finite element analysis is performed by
ANSYS. This paper includes pre-processing, analysis, post processing, and analyzing the FEA results by using
APDL (Ansys Parametric Design Language). The effects of anti-roll bar design parameters on final anti-roll bar
properties are also evaluated by performing sample analyses with the FEA program developed in this project.
The flow through the turbine components is associated with energy losses and hence energy
output from turbine is always less than the input energy. The global performance of turbine is
characterized by its overall efficiency. The casing has spiral shape and hence has swirling flow and
flow is subjected to frictional and vortex losses. The passage in stay ring and distributor has solid
vanes and flow passes through the ducts between the vanes is subjected mostly frictional losses.
Since runner is the most important component of mixed flow turbine and its design i.e. the blade
profile, number of blades plays vital role in overall performance of turbine at all operating regimes.
In the present work the numerical simulation of hydraulic Francis turbine is carried out by using
ANSYS software. The losses in each part of turbine are computed at different operating conditions
by changing the solidity of existing runner. The numerical results for efficiency of existing runner
are validated with experimental values. This study can be used efficiently as a reliable tool for
the practical design and performance analysis of Francis hydraulic turbines.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
An investigation of structural integrity of chassis mounted platform subjecte...Dr.Vikas Deulgaonkar
The present work deals with the investigation of strength of a specialized chassis mounted platform/structure designed to carry concentrated load. This work deals with the mathematics behind braking through shear and bending diagrams analysis processes. The perceptible loading case in the present analysis comprises braking load and its effect on the platform/structure by usage of simple shear force & bending moment diagrams. These diagrams reveal the distribution of shearing force during braking for typical Indian truck. Present analysis accentuates on the design stage aspects of the platform as this research is a step in doctoral study. Effect of load during braking for an atypical type of combination of longitudinal and cross members in platform/frame design is formulated. This paper provides a new technique for computation of strength using shear and bending diagrams. Peculiarity of this analysis is the usage of combined section modulus of three members for computation of stress.
COMPARATIVE ANALYSIS OF CONVENTIONAL LEAF SPRING AND COMPOSITE LEAFijiert bestjournal
A leaf spring is a simple form of spring,commonly used for the suspension in wheeled vehicles. It is also one of the oldest forms of spring. Sometimes referred to as a semielliptical l eaf spring (SELS) it takes the form of a slender ar c-shaped length of spring steel of rectangular cross section. The centre of the arc p rovides location for the axle,while tie holes are provided at either end for attaching to the vehicle body. In the present work,a seven-leaf steel spring use d in passenger cars is replaced with a composite mu lti leaf spring made of glass/epoxy composites. The dimensions sand the num ber of leaves for both steel leaf spring and compos ite leaf springs are considered to be the same. The primary objective is to compare their load carrying capacity,stiffness and weight savings of composite leaf spring. Finally,fatigue life of steel and com posite leaf spring is also predicted using life dat a
FEA OF A CRANKSHAFT IN CRANK-PIN WEB FILLET REGION FOR IMPROVING FATIGUE LIFEijiert bestjournal
A crankshaft is often designed with a fillet radius to improving fatigue life of crankshaft. The fatigue life of crankshaft is depend on the proper fillet radius. This fillet radius is changes than fatigue life is also changes of crankshaft. In most of the time fatigue failure is occur in crank-pin web fillet region. The crankshaft fillet rolling process is one of the commonly adopted methods in engineering to improve fatigue life of the crankshaft. A finite element analysis is implemented to approximate the stress distribution induced in the crankpin fillet region. The modelling of crankshaft is created by Creo-parametric. Finite element analysis is performed to obtain the variation of stress at critical locations and fatigue life of the crank shaft using the ANSYS software and applying th e boundary conditions. Radius of fillet is changes in model of crankshaft to improvement in fatigue life. Th is work in doing for optimization of a crankshaft in crank-pin web fillet region with fatigue life as well as to study a relation between fillet radius/diameter of crankpin to fatigue life. .
A shock absorber is a mechanical device designed to reduce the amplitude of damp shock impulse, and dissipate kinetic energy which helps in improved ride quality, and increase in comfort. Substantially reduced amplitude of disturbances that effected while travelling over rough ground. The aim of the current work is to analyse by considering load acting on the single shock absorber spring. Structural analysis is done to validate the strength while load acting on the spring. Comparison is done analytically for different materials, diameter of wires and number of coils to get the design of spring in shock absorber. The experimental results are compared with virtual results. From this work the design of the spring can be modified within standards.
DESIGN, OPTIMIZATION AND FINITE ELEMENT ANALYSIS OF CRANKSHAFTijiert bestjournal
Crankshaft is a crucial component in an engine asse mbly. Crankshaft is consisting of two web sections and one crankpin,which converts the reciprocating displacement of the pist on to a rotary motion with a four link mechanism. G enerally crankshafts are manufactured using cast iron and forged steel mater ial. In this work to design and finite element anal ysis of crankshaft of 4 cylinder petrol engine of Maruti swift Vxi. of 1200 cubic capacity. The finite element analysis in ABA QUS software by using six materials based on their composition viz. Cast iron,EN30B,SAE4340,Structural steel,C70 Alloy steel and Aluminium based composite material reinforced with silicon carbide & fly ash. The parameter like von misses stress,deformation;maximum and minimum principal stress & strain were obtained from analysis software. The results of Finite element show that t he Aluminium based composite material is best mater ial among all. Compare the result like weight and Stiffness parameter. It is resulted of 65.539 % of weight,with reduction i n deformation.
Design and Fem Analysis of Car Alloy WheelIJERA Editor
The requirements for improved stiffness, reliability, fatigue life and increased efficiency involves challenges of developing innovative design solutions. The present work mainly focus on the design of car alloy wheel, where the analytical and FEM analysis approach was implemented to analyze baseline design. Initially static analysis was performed to obtain total deformation, strain and the stress of car alloy wheel. Three Dimensional model was created using CATIA and FE software ANSYS was used for discretization and analysis to obtain expected solution. The results were obtained through linear static analysis in terms of Total deformation while Minimum principal stress, Max Principal stress were found to be nearly equal for both 6 arms wheel and 4 arms wheel and 22.16 % of reduction in weight was observed and hence overall weight of the car alloy wheel was optimized.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath