Concrete Canvas

National Winner
Chambers of Commerce
Award 2011
Top Innovation
BRE Insite 2011
CHAMBER
AWARDS
2011
2011 Nominee,
2007 Finalist
Design to Improve Life Award
2009 Winner
Material Connexion Medium Award
Material of the Year
MTP Gold Medal Award
BUDMA 2011
POZNANI
N
TERNATI
ONALFAIR
AT WORLD OF CONCRETE
2011 Expert’s Choice Winner
Most Innovative Product
Modern Built
Environment
Knowledge
Transfer
Network
ROAD RAIL AGRO OTHERDESIGNPOWER PETROCHEM MINING
www.concretecanvas.co.uk
12.06.UK
MADE IN UK
www.concretecanvas.co.uk
Concrete Impregnated Fabric...
NATIONAL WINNER
most INNOVATIVE product

TM
TM
© Concrete Canvas Ltd. 2012
The information contained herein is offered free of charge and is, to the best of our knowledge, accurate. However, since the circumstances and conditions in which such information and the products
discussed therein can be used may vary and are beyond our control, we make no warranty, express or implied, of merchantability, fitness or otherwise, or against patent infringement, and we accept no
liability, with respect to or arising from use of such information or any such product.
www.concretecanvas.co.ukinfo@concretecanvas.co.uk+ 44 (0) 845 680 1908 www
Page 2
Concrete Canvas (CC) is a flexible, cement impregnated fabric that hardens when hydrated to form a thin, durable, water and fire proof
concrete layer.
The following guide provides useful information for installers, customers and specifiers of CC. It provides an overview of useful data and
techniques that can be used across a wide range of applications. The versatile nature of the material means that this document is not
exhaustive and is intended for guidance purposes only.
There are 3 CC types available with the following indicative specifications:
CC Type Thickness
(mm)
Roll Width
(mm)
Dry Weight
(kg/sqm)
Batched Roll
Coverage (sqm)
Batched Roll
Length (m)
Bulk Roll
Coverage (sqm)
Bulk Roll
Length (m)
CC5 5 1000 7.0 10 10.0 200 200.0
CC8 8 1100 12.0 5 4.5 125 113.6
CC13 13 1100 19.0 N/A N/A 80 72.7
Concrete Canvas™ User Guide
CC Specification
CC is available in two standard roll sizes; bulk rolls or smaller batched rolls. The quantity per roll differs between the CC types.
Bulk rolls weigh 1.6T and are supplied on 6 inch cardboard tubes which can be hung from a spreader beam and unrolled using suitable plant
equipment (see below). Bulk rolls provide the fastest method of laying CC and have the additional advantage of reducing the number of joints
required. Contact Concrete Canvas Ltd. for spreader beam hire.
Batched rolls are supplied on 3 inch cardboard cores with carry handles designed as a 2 to 4 man lift. All CC thicknesses can be supplied
batched to custom lengths for a small additional charge.
CC bulk rolls are individually wrapped and palletised. A 20ft ISO container can typically hold 1600sqm bulk of CC5, 1250sqm of CC8 or 800sqm
of CC13. All CC rolls are provided with a basic hydration guide in English within the packaging.
CC batched rolls are similarly supplied, individually wrapped in airtight PE packaging and palletised. 10 batched rolls fit on a standard 1.2 x
1.0m pallet. A 20ft ISO container can typically hold 1000sqm of CC5 or 500sqm of CC8. CC13 is not supplied as a batched roll as standard.
Bulk Rolls / Batched Rolls
Shipping / Stuffing
CC Types
CC batched rollsCC bulk rolls

TM
TM
Page 3
Some examples of applications for the different CC types are given below:
Example CC Applications
Application CC5 CC8 CC13 Comment
Dust Suppression ● ○ Use CC8 if the area is to be regularly trafficked.
Foundation Blinding ● ○ Use CC8 for heavy duty applications.
Weather Proofing /
Slope Stabilisation
● ● Use CC5 or CC8 depending on ground conditions.
Ditch Lining ○ ● ○ Use CC5 for light duty applications. Use CC8 for medium duty
applications. Use CC13 for heavy duty applications.
Bund Lining ● ● ● All thicknesses may be used depending on level of traffic.
Sandbag / Gabion
Reinforcement
○ ● ● CC8 has been tested by the British Army for sandbag
reinforcement.
Trackway / Flooring ● ● Use CC8 to CC13 depending on loading or substrate.
Pipe Protection ● ● ● All thicknesses may be used depending on protection
requirements.
Cable Covering ○ ○ ● All thicknesses may be used depending on protection
requirements.
CC Ditch Lining CC Slope Protection
CC Pipe Protection CC Bund Lining

TM
TM
Page 4
Concrete Canvas™
Hydration Instructions
Storage
CC Hydration at Low Temperatures (<5°C)
SPRAY THE FIBRE SURFACE WITH WATER UNTIL IT FEELS WET TO TOUCH FOR SEVERAL MINUTES AFTER SPRAYING.
Re-spray the CC again after 1 hour if:
- Installing CC5
- Installing CC on a steep or vertical surface
- Installing in warm climates
Notes:
- CC cannot be over hydrated and an excess of water is always recommended.
- Minimum ratio of water:CC is 1:2 by weight.
- Do not jet high pressure water directly onto the CC as this may wash a channel in the material.
- CC can be hydrated using saline or non-saline water.
- CC will hydrate and set underwater.
- CC has a working time of 1-2 hours after hydration. Do not move CC once it has begun to set.
- Working time will be reduced in hot climates.
- CC will set hard in 24 hours but will continue to gain strength for years.
- If CC is not fully saturated, the set may be delayed and strength reduced. If the set is delayed, re-wet with a large excess of water.
1) If the ground surface temperature is between 0 and 5°C and rising, Concrete Canvas should be covered with plastic sheeting immediately
after hydration. CC may exhibit a delayed set at very low temperatures.
2) If the surface temperature is expected to fall below 0°C in the 8 hours following hydration then use warm water (>15°C) mixed with CC
accelerant and cover with plastic sheeting. It is important to only use accelerant supplied by Concrete Canvas Ltd. as some admixtures may
delay set or impair performance of CC. Please contact Concrete Canvas with your specific temperature profile for a recommendation on the
dosage of accelerant required.
3) It is not recommended to install CC if the ground surface temperature is likely to fall below -4°C within 24 hours of initial hydration.
4) It is not recommended to install CC on frozen ground as the ground may move significantly when it thaws, creating voids underneath the
set Concrete Canvas.
CC should be stored in dry conditions away from direct sunlight and in the manufacturers sealed packaging. If stored
correctly CC has a shelf life of 24 months. If stored for longer CC may remain usable in many instances.

TM
TM
Page 5
A ‘snap off’ type disposable blade is the most suitable tool for cutting
CC before it is hydrated or set. When cutting dry CC, a 20mm
allowance should be left from the cut edge due to lost fill. This can be
avoided by wetting the CC prior to cutting.
Set CC can be cut as with conventional concrete, with angle grinders,
construction disc cutters or good quality tile cutters.
CC can also be cut using handheld self sharpening powered disc
cutters.
CC sheets in all three thicknesses can also be water cut to a fine
resolution. Contact Concrete Canvas Ltd. for further information.
Cutting CC
Cutting Unset CC
Cutting Set CC

TM
TM
Page 6
CC Mechanical Fixings
The versatility of CC means that a wide range of manual, electric or
gas powered staplers are suitable for attaching CC to soft substrates
such as wooden boarding for building cladding. Commercially
available hand staplers are suitable for fixing 2 layers of CC together
where a small amount of compression force is required - such as with
the simple overlap joint described on page 9.
There are a large number of mechanical fixings that are suitable for use with Concrete Canvas. Some of these fixings can be used in conjunction
with the non-mechanical joining methods described later in this guide to improve the mechanical strength or water proofing properties of joints.
Self tapping screws provide a quick and readily available means of
attaching CC to a substrate or to itself. Typical applications include
sandbag reinforcement or covering existing wooden or steel structures.
Standard nails can be used to attach CC. Alternatively, a power tool
such as the Hilti nail gun, provides a quick and effective method of
securing CC to hard surfaces such as concrete or rock. This may
be appropriate where CC is being used to recondition an existing
concrete surface or for spall lining in mining applications. It is important
to ensure that the nail is used with at least a 15mm washer to ensure
the head does not penetrate through the surface of the Canvas.
Alternatively large thread ‘self drive’ screws provide an excellent
method of securing overlapped layers of CC together. This is ideal
where a good mechanical joint is required, for applications such as
slope stabilisation, dust suppression or vehicle trackway. Contact
Concrete Canvas Ltd. for a recommended supplier and product
specification.
Staples Nails
Screws

TM
TM
Page 7
Hog-rings are available in a wide range of sizes and can be applied to Concrete Canvas using pneumatic, electrical or hand powered tools.
They provide a rapid means of securing CC either to itself or onto a wire mesh substrate such as gabion baskets. Hog-rings can also be used to
attach adjacent sheets of CC together by laying the material face to face (fibre side together) and then hog-ringing at intervals along the edge.
The spacing will vary depending on the level of mechanical fixing required.
Water Proof Rating : ●●●●○
Mechanical Strength : ●●●●○
If a more water proof seal is required, a Bitumen tape can be applied
over the hog-rings, onto the PVC backing, using a blow-torch. Using
this method, large panels of Concrete Canvas can be prefabricated
with relative ease.
Medium gauge wire can be used as a simple alternative to hog-rings
where plant equipment is not available. The end of the wire should be
cut to a sharp point to aid penetration through the CC layers.
CC Mechanical Fixings cont.
Hog Rings
Hog Rings cont.
Pneumatic hog-ringer fixing CC to a gabion basket
Hog-ringed CC layers opened out showing PVC surface Hog-ringed CC layers opened out showing fibre surface
2 CC layers laid face to face and hog-ringed togetherPneumatic hog-ringer fixing CC to a gabion basket 2 CC layers laid face to face and hog-ringed together
Hog-ringed CC layers opened out showing fibre surfaceHog-ringed CC layers opened out showing PVC surface

TM
TM
Page 8
Pegging is recommended for ground surfacing applications such as
ditch lining, slope stabilisation or erosion control. Typically pegs are
specified every 2m for most applications, but this will vary depending
on the ground conditions and application. Pegs should be used at
joints where possible to secure adjacent layers together. Pegs are
available directly from Concrete Canvas Ltd. in a range of sizes which
are suitable for use with CC. The peg must have a sufficiently sharp
point to penetrate the surface of the Canvas.
An alternative fixing method to pegging is to bury (anchor trench) the edges of the CC with soil or aggregate. This provides a means of both
fixing the material down and also ensures that surface run-off does not undermine the CC. This is particularly suitable for ditch lining, erosion
control and slope stabilisation applications. It also provides a more aesthetically pleasing finish.
Pegging
Burying CC Edges

TM
TM
1
2 3
Page 9
Water Proof Rating : ●●○○○ Water Proof Rating : ●●○○○
Mechanical Strength : ●○○○○ Mechanical Strength : ●●●●○
Overlapping Concrete Canvas is the simplest method of joining 2 layers together. This is appropriate for the majority of ditch lining, erosion
control and ground surfacing applications.
Overlapped joints should be compressed along the entire length while the material sets to ensure there are no voids between layers. This can
be done using screws, sandbags, water weights, loose fill, staples etc. Overlapping CC will provide a moderate level of water proofing and is
suitable for drainage applications. We recommend overlapping cut edges by a minimum of 100mm and sealed edges by a minimum of 50mm.
Water Proof Rating : ●●●○○
Mechanical Strength : ●●○○○
Concrete Canvas can be joined and sealed by applying a bonding
sealant between overlapping layers.
Concrete Canvas Ltd. can provide a recommended sealant which
bonds to both the PVC backing and fibre surface of Concrete Canvas.
A minimum bead size of 6mm should be applied along the length of
the joint and the two layers firmly pushed together. The sealant works
in both wet and dry conditions so can be applied before hydration or
immediately after.
The bonding sealant will fully cure in 24 hours.
CC Non-Mechanical Fixings
Simple CC Overlap Simple CC Overlap (Screwed)
CC Bonding Sealant

TM
TM
Page 10
Water Proof Rating : ●●●●○
Mechanical Strength : ●●●●○
Concrete Canvas can be joined and sealed by overlapping layers and
applying a grouting compound along the joint.
Concrete Canvas Ltd. can provide a bespoke cementious grout called
CC Jointing Grout for use in drainage and ditch lining applications.
CC Jointing Grout is based on the same cemetitious mix as Concrete
Canvas to create a homogenous joint.
The use of other grouting compounds may retard setting time and
reduce set strength, please contact Concrete Canvas Ltd. for further
advice.
Grout should be applied after hydrating the two overlapped layers.
Ensure that the bottom layer, including the overlapped area is properly
hydrated.
CC Jointing Grout has similar setting characteristics to CC and initial
set takes place after two hours.
After applying the grout, continue to hydrate as per CC hydration
instructions, ensuring not to apply jets of water directly onto the joint
to avoid washout of the grout.
Fig. 1 Recommended Minimum Coverage
CC Non-Mechanical Fixings cont.
CC Jointing Grout
When applying the grout, ensure that the coverage on each
overlapping edge is at least twice that of the thickness of CC that is
used. Also ensure the height of the grout is at least this thickness (see
diagram above).
t
t
t
2t
2t100mm
CC Layer 1
CC Layer 2
Grout
Fig. 3 CC8 over lapped joint with CC Grout

TM
TM
Page 11
The fibre surface of CC can be easily painted once set using standard exterior masonry paint. This provides a quick and simple method
of improving the aesthetic appearance of CC. Alternatively, Concrete Canvas Ltd. can recommend a range of copolymer concrete surface
treatments which can provide a coloured uniform finish as well as hydrophobic protection against staining and organic growth. Fire retardant
paints have also been shown to be effective where thermal performance is critical.
Finishing
A white cement blend of Concrete Canvas is available on request subject to minimum volumes. This blend provides a brilliant white uniform
finish and would suit architectural or decorative applications. Contact Concrete Canvas Ltd. for further information.

TM
Contact Concrete Canvas Ltd. (UK)
Concrete Canvas™
Material Data
Physical Properties*
Setting
Method of Hydration
Working Time 1-2 hours subject to ambient temperature
CC will achieve 80% strength at 24 hours after hydration.
Spray the fibre surface with water until it feels wet to touch
for several minutes after spraying.
Re-spray the CC again after 1 hour if:
- Installing CC5
- Installing CC on a steep or vertical surface
- Installing in warm climates
Notes:
- CC cannot be over hydrated and an excess of water is always
recommended.
- Minimum ratio of water:CC is 1:2 by weight.
- Do not jet high pressure water directly onto the CC as this may wash
a channel in the material.
- CC can be hydrated using saline or non-saline water.
- CC will hydrate and set underwater.
- CC has a working time of 1-2 hours after hydration. Do not move CC
once it has begun to set.
- Working time will be reduced in hot climates.
- CC will set hard in 24 hours but will continue to gain strength for
years.
- If CC is not fully saturated, the set may be delayed and strength
reduced. If the set is delayed, re-wet with a large excess of water.
* Indicative values
Freeze-thaw testing (BS EN 12467:2004 part 5.5.2)
Soak-Dry testing (BS EN 12467:2004 part 5.5.5)
Water impermeability (BS EN 12467:2004 part 5.4.4)
Moisture vapour transmission rate
PVC Thickness
PVC MVTR range
CC Static Head
Patent Protected
Pat Pend/Granted: AE (932/2006), AU (2005254788), BR (PI 0511408-0), CA (2570532),
CA (2655054), EP (1766162), EP (2027319), GB (2455008), IN (20/DELNP/2007),
JP (2007-516049), NO (20070245), RU (2386767), SA (12/303,864), US (7721749),
US (US-2010-0233417-A1), WO 2010/086618, ZA (2007/0471), ZA (2009/00222)
and other patents pending.
Strength
Other
Patent Information
Abrasion Resistance (DIN 52108)
- Similar to twice that of OPC
MOHS hardness
CBR Puncture Resistance EN ISO 12236: 2007 (CC8 & CC13 only)
- Min. Push-through force
- Max. Deflection at Peak
Resistance to Imposed Loads on Vehicle Traffic Areas
EN 1991-1-1:2002 (CC8 & CC13 only)
- Category G compliant
- Gross weight of 2 axle vehicle 30 to 160kN
- Uniformly distributed load not exceeding 5kN/sqm
Standard Test Method for Impact Resistance of Pipeline Coatings
ASTM G13 (CC13 only)
Very high early strength is a fundamental characteristic of CC.
Typical strengths and physical characteristics are as follows:
Compressive tests based on ASTM C109 – 02
- 10 day compressive failure stress (MPa)
Bending tests based on BS EN 12467:2004
- 10 day bending failure stress (MPa)
- 10 day bending Youngs modulus (MPa)
Tensile data
40
3.4
180
2.69kN
38mm
0.42 mm
0.836 - 0.924 g.mm / (m².day)
Passed
Passed**
< 3000mm
Passed
Passed
Max 0.10 gm/cm2
4-5
Tensile strength (kN/m)
Length direction Width direction
CC5 6.7 3.8
CC8 8.6 6.6
CC13 19.5 12.8
The information contained herein is offered free of charge and is, to the best of our
knowledge, accurate. However, since the circumstances and conditions in which such
information and the products discussed therein can be used may vary and are beyond our
control, we make no warranty, express or implied, of merchantability, fitness or otherwise,
or against patent infringement, and we accept no liability, with respect to or arising from
use of such information or any such product.
** For tanking applications where a 100% waterproof seal is required, it is
recommended to use CC as a protective overlay in combination with an
appropriate sealed membrane liner. CC is not recommended as the sole
barrier layer where 100% impermeability is critical.
Reaction to Fire
CC has achieved Euroclass B certification:
BS EN 13501-1:2007+A1:2009 B-s1, d0
Concrete Canvas Ltd.
CF37 5SP, United Kingdom
11
EN12467:2004
Concrete Canvas:
Fibre cement sheet
NT
Oversize sheets
Class 1, Category A
Reaction to Fire B-s1,d0
© Concrete Canvas 2012
CC Thickness
(mm)
Batch Roll
Size (sqm)
Bulk Roll
Size (sqm)
Roll Width
(m)
CC5 5 10 200 1.0
CC8 8 5 125 1.1
CC13 13 N/A 80 1.1
CC Mass (unset)
(kg/m2)
Density (unset)
(kg/m3)
Density (set)
(kg/m3)
CC5 7.0 1500 +30-35%
CC8 12.0 1500 +30-35%
CC13 19.0 1500 +30-35%
Address E-mail: info@concretecanvas.co.uk
Unit 3, Block A22, Phone: +44 (0) 845 680 1908
Treforest Ind. Estate, Web: www.concretecanvas.co.uk
CF37 5SP, UK

Concrete Canvas

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Concrete Canvas

Similar to Concrete Canvas (20)

More from Budi Suryanto

More from Budi Suryanto (9)

Recently uploaded

Recently uploaded (20)

Concrete Canvas