Chapter2 question bank
•Download as DOCX, PDF•
0 likes•6 views
This document contains 14 multiple choice questions about PN junction diodes, their characteristics and operating principles. The questions cover topics such as the formation of depletion layers, forward and reverse bias operation, VI characteristics, definitions of terms like static resistance and breakdown voltage, and the differences between Zener and avalanche breakdown.
Report
Share
Report
Share
Recommended
Cntl model paper
This document contains model paper questions for a 5th semester electronics and communication engineering course covering topics like networks, filters, transmission lines, and matching. Some key topics covered include:
1. Lattice and bridge T networks, symmetrical T networks, and reducing complex networks.
2. Image impedance, characteristic impedance, propagation constant, and symmetrical T-networks.
3. Attenuators, symmetrical T attenuators, and resistive attenuators.
4. Constant-k high pass filters, limitations of constant-k prototypes, and M-derived band pass filters.
5. Reflection coefficient, VSWR, transmission lines, skin effect, and matching using stubs and Smith charts.
Q bank chap3,4,5,6
Electrical current, voltage, resistance, capacitance, and inductance are a few of the basic elements of electronics and radio. Apart from current, voltage, resistance, capacitance, and inductance, there are many other interesting elements to electronic technology. ... Use Electronics Notes to learn electronics online.
Important question for ETX
This document contains an exam preparation guide for a semester exam on computer and information technology. It includes 7 chapters that will be covered on the exam, with the number of marks allocated to each chapter. The chapters include introduction to electronics, semiconductor theory, semiconductor diode, rectifiers filters and regulators, bipolar junction transistor, field effect transistor, and integrated circuits. The document also provides example questions for each chapter to help students prepare, and provides general notes about attending lectures, using a calculator, bringing colored pens, and practicing examples at home.
Electrical Technology Important Questions
This document provides an exam study guide for an electrical engineering semester exam. It includes 6 chapters covering topics like DC circuits, AC fundamentals, polyphase circuits, transformers, rotating machines, and installation/earthing/troubleshooting. For each chapter, it lists very important questions and other important questions to study. It provides notes on attending lectures, using calculators and pens, practicing examples at home, and being prepared and regular for class. The document was prepared by Mr. Vijay Balu Raskar to support the student Amol Budkhe.
Assignment 1 related to Semiconductor for class 12
Semiconductor assignment for grade 12. It's help to understand types of question asked in CBSE paper.
17417 transmission & distribution of electrical power
This document contains two sample test papers for an electrical engineering diploma course on transmission and distribution of electrical power. The papers contain multiple choice and descriptive questions evaluating student knowledge of topics like primary and secondary transmission voltages in India, conductor properties, insulator failure causes, corona effects, transmission line configurations, distribution systems, substation components and their functions. The questions cover calculations of line voltages, efficiencies, and power factors for transmission and distribution systems.
EE8403 Measurements and Instrumentation
This document discusses various measurement and instrumentation topics across five units:
1. Introduction to instrumentation systems and measurement errors.
2. Electrical and electronic instruments like moving coil instruments, wattmeters, and frequency meters.
3. Comparison methods of measurement like potentiometers, bridges, and electromagnetic interference.
4. Storage and display devices including magnetic tape recorders, CRTs, LCDs, and plotters.
5. Transducers and data acquisition systems covering resistive, inductive, capacitive, and other types of transducers as well as ADCs, DACs, and data acquisition systems.
Power Quality 16 Marks Question Bank
The document discusses power quality issues and monitoring. It covers various types of power quality disturbances like transients, sags, swells, harmonics, interruptions and their impacts. Harmonic distortion, total harmonic distortion and standards are explained. Causes and effects of voltage sags are discussed along with mitigation techniques. Overvoltages including lighting and ferroresonance are covered. Harmonic generation, sources and effects are detailed. The document concludes with power quality monitoring objectives, steps, sites selection, instruments and expert systems.
Recommended
Cntl model paper
This document contains model paper questions for a 5th semester electronics and communication engineering course covering topics like networks, filters, transmission lines, and matching. Some key topics covered include:
1. Lattice and bridge T networks, symmetrical T networks, and reducing complex networks.
2. Image impedance, characteristic impedance, propagation constant, and symmetrical T-networks.
3. Attenuators, symmetrical T attenuators, and resistive attenuators.
4. Constant-k high pass filters, limitations of constant-k prototypes, and M-derived band pass filters.
5. Reflection coefficient, VSWR, transmission lines, skin effect, and matching using stubs and Smith charts.
Q bank chap3,4,5,6
Electrical current, voltage, resistance, capacitance, and inductance are a few of the basic elements of electronics and radio. Apart from current, voltage, resistance, capacitance, and inductance, there are many other interesting elements to electronic technology. ... Use Electronics Notes to learn electronics online.
Important question for ETX
This document contains an exam preparation guide for a semester exam on computer and information technology. It includes 7 chapters that will be covered on the exam, with the number of marks allocated to each chapter. The chapters include introduction to electronics, semiconductor theory, semiconductor diode, rectifiers filters and regulators, bipolar junction transistor, field effect transistor, and integrated circuits. The document also provides example questions for each chapter to help students prepare, and provides general notes about attending lectures, using a calculator, bringing colored pens, and practicing examples at home.
Electrical Technology Important Questions
This document provides an exam study guide for an electrical engineering semester exam. It includes 6 chapters covering topics like DC circuits, AC fundamentals, polyphase circuits, transformers, rotating machines, and installation/earthing/troubleshooting. For each chapter, it lists very important questions and other important questions to study. It provides notes on attending lectures, using calculators and pens, practicing examples at home, and being prepared and regular for class. The document was prepared by Mr. Vijay Balu Raskar to support the student Amol Budkhe.
Assignment 1 related to Semiconductor for class 12
Semiconductor assignment for grade 12. It's help to understand types of question asked in CBSE paper.
17417 transmission & distribution of electrical power
This document contains two sample test papers for an electrical engineering diploma course on transmission and distribution of electrical power. The papers contain multiple choice and descriptive questions evaluating student knowledge of topics like primary and secondary transmission voltages in India, conductor properties, insulator failure causes, corona effects, transmission line configurations, distribution systems, substation components and their functions. The questions cover calculations of line voltages, efficiencies, and power factors for transmission and distribution systems.
EE8403 Measurements and Instrumentation
This document discusses various measurement and instrumentation topics across five units:
1. Introduction to instrumentation systems and measurement errors.
2. Electrical and electronic instruments like moving coil instruments, wattmeters, and frequency meters.
3. Comparison methods of measurement like potentiometers, bridges, and electromagnetic interference.
4. Storage and display devices including magnetic tape recorders, CRTs, LCDs, and plotters.
5. Transducers and data acquisition systems covering resistive, inductive, capacitive, and other types of transducers as well as ADCs, DACs, and data acquisition systems.
Power Quality 16 Marks Question Bank
The document discusses power quality issues and monitoring. It covers various types of power quality disturbances like transients, sags, swells, harmonics, interruptions and their impacts. Harmonic distortion, total harmonic distortion and standards are explained. Causes and effects of voltage sags are discussed along with mitigation techniques. Overvoltages including lighting and ferroresonance are covered. Harmonic generation, sources and effects are detailed. The document concludes with power quality monitoring objectives, steps, sites selection, instruments and expert systems.
EC8252 NOTES 3rd to 5th unit_compressed.pdf
This document contains a question bank for the course EC8252 - Electronic Devices at Jansons Institute of Technology. It includes 20 multiple choice questions in Part A covering topics like PN junction diodes, diffusion current, drift current, and more. Part B contains 18 numerical and conceptual questions related to PN junction diode characteristics, IV curves, reverse saturation current, and other diode parameters.
The document serves as a study guide for students taking the EC8252 exam, testing their understanding of fundamental electronic device concepts through a variety of questions.
Bee questionbank
This document contains questions from 5 units on the topic of Basic Electrical Engineering. The questions cover topics such as derivation of rms value, active and reactive power, Thevenin's theorem, power calculations in AC circuits, transformer theory including equivalent circuits and testing, DC motor characteristics and speed control, induction motor theory including rotating magnetic fields and starting methods, and single phase motors including split phase, capacitor start, and stepper motors. Both short answer and long answer questions are provided ranging from derivations to explanations to circuit analyses.
</SUMMARY>
Industrial Electronics 80 Marks Sample Test Paper
This sample question paper is for the subject of Industrial Electronics in the fifth semester of an Electronics and Telecommunication course. The paper has 6 questions divided into multiple parts. It covers topics such as semiconductor device symbols, characteristics of UJT and SCR, rectifier circuits including half wave, full wave and bridge configurations, triggering circuits, commutation methods, and applications of devices like SCR, TRIAC, IGBT in control and power electronics. Students are required to attempt several parts from each question covering diagrams, explanations and derivations with a maximum time given of 3 hours.
Digital Electronics Question Bank
This document contains a question bank with multiple choice and short answer questions covering various topics in digital electronics across 5 units. Some of the key topics covered include binary, hexadecimal, octal number systems; logic gates and families (TTL, CMOS, ECL); flip-flops, counters, registers; basics of memory units (RAM, ROM); programmable logic devices (PLA, PLD); and asynchronous sequential circuits including hazards. The document is divided into parts for each unit with concepts ranging from introductory to advanced level questions.
PEQPAU.pdf
The document contains details regarding the B.E/B.Tech degree examination for the subject of Power Electronics. It includes 20 marks for 10 short answer questions in Part A, 65 marks for 5 long answer questions in Part B, and 15 marks for 1 long answer question in Part C, for a total of 100 marks. The questions cover topics such as snubber circuits, thyristors, rectifiers, choppers, inverters, and AC voltage controllers. The document provides the framework and guidelines for the examination on Power Electronics.
Lecture 2: Power Diodes
This document discusses power semiconductor devices used in power electronics applications. It describes the structure and operation of power diodes, including their P-I-N structure, forward and reverse characteristics, and turn-off behavior. Schottky diodes and their advantages over P-N junction diodes are also covered. The document then discusses power MOSFETs and their vertical channel structure for handling higher power. Finally, it briefly covers power bipolar junction transistors and compares them to other power devices like IGBTs and MOSFETs.
EEE 2
This document contains a 35-page exam on electrical circuit analysis techniques including nodal analysis, mesh analysis, Thevenin's theorem, Norton's theorem, and maximum power transfer theorem. It includes 37 practice problems of varying difficulty, asking students to use these analysis methods to solve circuits, determine equivalent circuits, calculate voltages, currents, power, and efficiency. The document provides circuit diagrams, explanations of analysis steps, and spaces for students to show their work and solutions.
Hsc physics revision for semiconductors and communication
This document provides an overview of topics and potential exam questions related to semiconductors and communication systems. For semiconductors, it lists definitions, concepts, and circuit examples that could be asked about in 2-3 mark questions. These include conduction bands, band gaps, intrinsic/extrinsic semiconductors, diodes, transistors, logic gates, and oscillator circuits. For communication systems, it lists definitions, concepts, and diagrams that could be asked about in 1-3 mark questions, covering topics like propagation modes, system components, modulation techniques, and applications. The document aims to prepare students for exams on these subjects by outlining the essential information and level of understanding required to answer different types of questions.
R05010204 E L E C T R O N I C D E V I C E S A N D C I R C U I T S
This document contains an exam for an electronics course, with 8 questions covering various topics:
1. Deriving expressions for electron trajectory in a magnetic field and CRT deflection sensitivity.
2. Explaining pn-junction energy band diagrams and calculating diode current from voltage.
3. Comparing filter circuits, determining ripple factor for an L-type filter.
4. Analyzing a transistor switching circuit and explaining MOSFET structure.
5. Discussing thermal runaway and resistance, calculating voltages in a circuit.
6. Deriving relations for current/voltage gain and input resistance for a CE amplifier.
7. Explaining feedback factors and calculating gains for a
Assignment 1
This document contains instructions and questions for an assignment on electrical machines. It is divided into four sections, with multiple questions in each section. Section one asks about the properties of ideal and practical transformers, differences between single and three-phase transformers, and calculations related to transformer windings. Section two involves calculations to determine equivalent circuit parameters for a transformer. Section three covers the basic principles and characteristics of DC motors and generators. Section four involves calculations to determine generated electromotive forces in different types of generators under varying conditions.
Basic electronics
The document contains 5 questions asking about: 1) the names and construction of NPN and PNP bipolar junction transistors and whether their properties change with germanium or silicon bases, 2) using characteristics from a figure to determine collector current values for given emitter currents and collector-base voltages and how the current is affected by changes in voltage, 3) determining output voltage and diode current for a given network, 4) describing forward and reverse bias conditions on a p-n junction diode and how they affect current, and 5) determining voltages for another given network.
Chap3
Electrical current, voltage, resistance, capacitance, and inductance are a few of the basic elements of electronics and radio. Apart from current, voltage, resistance, capacitance, and inductance, there are many other interesting elements to electronic technology. ... Use Electronics Notes to learn electronics online.
EC8351-Electronic Circuits-I study material.pdf
This document contains the course syllabus for Electronic Circuits - I. It includes 5 units that cover various topics related to power supplies, biasing, and amplifiers using BJTs, JFETs, and MOSFETs.
The syllabus outlines the topics that will be covered in each unit, such as rectifiers and power supplies in Unit I, small signal analysis of common emitter, common collector, and common base BJT amplifiers in Unit II, small signal analysis of JFET and MOSFET amplifiers in Unit III, frequency analysis of BJT and MOSFET amplifiers in Unit IV, and IC MOSFET amplifiers such as current sources and differential amplifiers in Unit V
Lecture 4 4521 semiconductor device physics - metal-semiconductor system
This document discusses metal-semiconductor contacts and junctions. It provides figures from the textbook explaining the band diagrams and behavior of Ohmic contacts, Schottky contacts, and pn junction diodes. It addresses questions about deriving analytic models for the I-V characteristics and small-signal models of these devices based on their band structures and transport mechanisms.
Analog & Digital Integrated Circuits (Question Bank)
This document contains question banks for the subject Analog & Digital Integrated Circuits. It is divided into 5 units covering topics such as operational amplifiers, phase locked loops, ADCs and DACs, Boolean algebra, combinational logic circuits, sequential logic circuits and flip-flops. The question bank contains objective type questions to test knowledge as well as longer questions requiring explanations and circuit design to test comprehension. It aims to provide a comprehensive set of practice questions covering the key concepts of the subject.
Elect principles 2 nortons theorem
Norton's theorem allows replacing a network containing voltage sources with a current source (ISC) in parallel with an internal resistance (RN). It is derived by short-circuiting the terminals to find the short-circuit current (ISC), then calculating the equivalent resistance RN by removing the sources. The Norton equivalent circuit can then be used to analyze the network for any load conditions by applying current division.
Derivations
This document provides theoretical important questions from various chapters in Physics for Class XII. It includes questions on topics like electrostatics, current electricity, magnetic effects of current, electromagnetic induction, alternating current, electromagnetic waves, ray optics, wave optics, dual nature of radiation, semiconductor devices, and principles of communication. Some of the questions ask students to derive expressions, explain concepts, or draw diagrams. In total there are over 200 questions covering the entire Class XII Physics syllabus.
20 questions cmos ckts
This document contains 20 questions related to CMOS circuits. The questions cover topics such as common source amplifiers, differential amplifiers, switched capacitor amplifiers, ring oscillators, phase locked loops, flip flops, ROM architectures, dynamic memory cells, programmable logic arrays, content addressable memory, parity generators, and binary multiplication algorithms. Students are asked to analyze circuits, derive equations, perform numerical calculations, draw diagrams, and explain concepts.
Basics of electrical_and_electronics-2019-syllabus-ktustudents.in
This document outlines a course on basics of electrical and electronics engineering. The course aims to equip students with an understanding of fundamental electrical engineering principles, provide an overview of the evolution of electronics and basic electronic devices, and introduce basic concepts in radio communication.
The course outcomes include applying circuit laws to solve DC and AC circuits, describing voltage amplifiers and instrumentation systems, and explaining radio and cellular communication principles. Assessment includes continuous tests and an end semester exam covering both electrical and electronics topics. The syllabus covers topics such as basic circuit concepts, magnetic circuits, signal analysis, semiconductor devices, amplifiers, and communication systems.
550663274
This document provides an overview of the contents of the book "CMOS Circuit Design, Layout, and Simulation" by R. Jacob Baker. The book covers CMOS design fundamentals including fabrication, SPICE simulation, layout of wells, metal layers, active/poly layers, resistors, capacitors, MOSFETs, and covers topics like inverters, logic gates, clocked circuits, memory circuits and more. It includes chapters written by other authors on CMOS fabrication processes and electrical noise.
Wi fi hacking
Chances are you have a Wi-Fi network at home, or live close to one (or more) that tantalizingly pops up in a list whenever you boot up the laptop.
The problem is, if there's a lock next to the network name (AKA the SSID, or service set identifier), that indicates security is activated. Without the password or passphrase, you're not going to get access to that network, or the sweet, sweet internet that goes with it.
D dos attack
A distributed denial-of-service (DDoS) attack is a malicious attempt to disrupt normal traffic of a targeted server, service or network by overwhelming the target or its surrounding infrastructure with a flood of Internet traffic. DDoS attacks achieve effectiveness by utilizing multiple compromised computer systems as sources of attack traffic. Exploited machines can include computers and other networked resources such as IoT devices. From a high level, a DDoS attack is like a traffic jam clogging up with highway, preventing regular traffic from arriving at its desired destination.
More Related Content
Similar to Chapter2 question bank
EC8252 NOTES 3rd to 5th unit_compressed.pdf
This document contains a question bank for the course EC8252 - Electronic Devices at Jansons Institute of Technology. It includes 20 multiple choice questions in Part A covering topics like PN junction diodes, diffusion current, drift current, and more. Part B contains 18 numerical and conceptual questions related to PN junction diode characteristics, IV curves, reverse saturation current, and other diode parameters.
The document serves as a study guide for students taking the EC8252 exam, testing their understanding of fundamental electronic device concepts through a variety of questions.
Bee questionbank
This document contains questions from 5 units on the topic of Basic Electrical Engineering. The questions cover topics such as derivation of rms value, active and reactive power, Thevenin's theorem, power calculations in AC circuits, transformer theory including equivalent circuits and testing, DC motor characteristics and speed control, induction motor theory including rotating magnetic fields and starting methods, and single phase motors including split phase, capacitor start, and stepper motors. Both short answer and long answer questions are provided ranging from derivations to explanations to circuit analyses.
</SUMMARY>
Industrial Electronics 80 Marks Sample Test Paper
This sample question paper is for the subject of Industrial Electronics in the fifth semester of an Electronics and Telecommunication course. The paper has 6 questions divided into multiple parts. It covers topics such as semiconductor device symbols, characteristics of UJT and SCR, rectifier circuits including half wave, full wave and bridge configurations, triggering circuits, commutation methods, and applications of devices like SCR, TRIAC, IGBT in control and power electronics. Students are required to attempt several parts from each question covering diagrams, explanations and derivations with a maximum time given of 3 hours.
Digital Electronics Question Bank
This document contains a question bank with multiple choice and short answer questions covering various topics in digital electronics across 5 units. Some of the key topics covered include binary, hexadecimal, octal number systems; logic gates and families (TTL, CMOS, ECL); flip-flops, counters, registers; basics of memory units (RAM, ROM); programmable logic devices (PLA, PLD); and asynchronous sequential circuits including hazards. The document is divided into parts for each unit with concepts ranging from introductory to advanced level questions.
PEQPAU.pdf
The document contains details regarding the B.E/B.Tech degree examination for the subject of Power Electronics. It includes 20 marks for 10 short answer questions in Part A, 65 marks for 5 long answer questions in Part B, and 15 marks for 1 long answer question in Part C, for a total of 100 marks. The questions cover topics such as snubber circuits, thyristors, rectifiers, choppers, inverters, and AC voltage controllers. The document provides the framework and guidelines for the examination on Power Electronics.
Lecture 2: Power Diodes
This document discusses power semiconductor devices used in power electronics applications. It describes the structure and operation of power diodes, including their P-I-N structure, forward and reverse characteristics, and turn-off behavior. Schottky diodes and their advantages over P-N junction diodes are also covered. The document then discusses power MOSFETs and their vertical channel structure for handling higher power. Finally, it briefly covers power bipolar junction transistors and compares them to other power devices like IGBTs and MOSFETs.
EEE 2
This document contains a 35-page exam on electrical circuit analysis techniques including nodal analysis, mesh analysis, Thevenin's theorem, Norton's theorem, and maximum power transfer theorem. It includes 37 practice problems of varying difficulty, asking students to use these analysis methods to solve circuits, determine equivalent circuits, calculate voltages, currents, power, and efficiency. The document provides circuit diagrams, explanations of analysis steps, and spaces for students to show their work and solutions.
Hsc physics revision for semiconductors and communication
This document provides an overview of topics and potential exam questions related to semiconductors and communication systems. For semiconductors, it lists definitions, concepts, and circuit examples that could be asked about in 2-3 mark questions. These include conduction bands, band gaps, intrinsic/extrinsic semiconductors, diodes, transistors, logic gates, and oscillator circuits. For communication systems, it lists definitions, concepts, and diagrams that could be asked about in 1-3 mark questions, covering topics like propagation modes, system components, modulation techniques, and applications. The document aims to prepare students for exams on these subjects by outlining the essential information and level of understanding required to answer different types of questions.
R05010204 E L E C T R O N I C D E V I C E S A N D C I R C U I T S
This document contains an exam for an electronics course, with 8 questions covering various topics:
1. Deriving expressions for electron trajectory in a magnetic field and CRT deflection sensitivity.
2. Explaining pn-junction energy band diagrams and calculating diode current from voltage.
3. Comparing filter circuits, determining ripple factor for an L-type filter.
4. Analyzing a transistor switching circuit and explaining MOSFET structure.
5. Discussing thermal runaway and resistance, calculating voltages in a circuit.
6. Deriving relations for current/voltage gain and input resistance for a CE amplifier.
7. Explaining feedback factors and calculating gains for a
Assignment 1
This document contains instructions and questions for an assignment on electrical machines. It is divided into four sections, with multiple questions in each section. Section one asks about the properties of ideal and practical transformers, differences between single and three-phase transformers, and calculations related to transformer windings. Section two involves calculations to determine equivalent circuit parameters for a transformer. Section three covers the basic principles and characteristics of DC motors and generators. Section four involves calculations to determine generated electromotive forces in different types of generators under varying conditions.
Basic electronics
The document contains 5 questions asking about: 1) the names and construction of NPN and PNP bipolar junction transistors and whether their properties change with germanium or silicon bases, 2) using characteristics from a figure to determine collector current values for given emitter currents and collector-base voltages and how the current is affected by changes in voltage, 3) determining output voltage and diode current for a given network, 4) describing forward and reverse bias conditions on a p-n junction diode and how they affect current, and 5) determining voltages for another given network.
Chap3
Electrical current, voltage, resistance, capacitance, and inductance are a few of the basic elements of electronics and radio. Apart from current, voltage, resistance, capacitance, and inductance, there are many other interesting elements to electronic technology. ... Use Electronics Notes to learn electronics online.
EC8351-Electronic Circuits-I study material.pdf
This document contains the course syllabus for Electronic Circuits - I. It includes 5 units that cover various topics related to power supplies, biasing, and amplifiers using BJTs, JFETs, and MOSFETs.
The syllabus outlines the topics that will be covered in each unit, such as rectifiers and power supplies in Unit I, small signal analysis of common emitter, common collector, and common base BJT amplifiers in Unit II, small signal analysis of JFET and MOSFET amplifiers in Unit III, frequency analysis of BJT and MOSFET amplifiers in Unit IV, and IC MOSFET amplifiers such as current sources and differential amplifiers in Unit V
Lecture 4 4521 semiconductor device physics - metal-semiconductor system
This document discusses metal-semiconductor contacts and junctions. It provides figures from the textbook explaining the band diagrams and behavior of Ohmic contacts, Schottky contacts, and pn junction diodes. It addresses questions about deriving analytic models for the I-V characteristics and small-signal models of these devices based on their band structures and transport mechanisms.
Analog & Digital Integrated Circuits (Question Bank)
This document contains question banks for the subject Analog & Digital Integrated Circuits. It is divided into 5 units covering topics such as operational amplifiers, phase locked loops, ADCs and DACs, Boolean algebra, combinational logic circuits, sequential logic circuits and flip-flops. The question bank contains objective type questions to test knowledge as well as longer questions requiring explanations and circuit design to test comprehension. It aims to provide a comprehensive set of practice questions covering the key concepts of the subject.
Elect principles 2 nortons theorem
Norton's theorem allows replacing a network containing voltage sources with a current source (ISC) in parallel with an internal resistance (RN). It is derived by short-circuiting the terminals to find the short-circuit current (ISC), then calculating the equivalent resistance RN by removing the sources. The Norton equivalent circuit can then be used to analyze the network for any load conditions by applying current division.
Derivations
This document provides theoretical important questions from various chapters in Physics for Class XII. It includes questions on topics like electrostatics, current electricity, magnetic effects of current, electromagnetic induction, alternating current, electromagnetic waves, ray optics, wave optics, dual nature of radiation, semiconductor devices, and principles of communication. Some of the questions ask students to derive expressions, explain concepts, or draw diagrams. In total there are over 200 questions covering the entire Class XII Physics syllabus.
20 questions cmos ckts
This document contains 20 questions related to CMOS circuits. The questions cover topics such as common source amplifiers, differential amplifiers, switched capacitor amplifiers, ring oscillators, phase locked loops, flip flops, ROM architectures, dynamic memory cells, programmable logic arrays, content addressable memory, parity generators, and binary multiplication algorithms. Students are asked to analyze circuits, derive equations, perform numerical calculations, draw diagrams, and explain concepts.
Basics of electrical_and_electronics-2019-syllabus-ktustudents.in
This document outlines a course on basics of electrical and electronics engineering. The course aims to equip students with an understanding of fundamental electrical engineering principles, provide an overview of the evolution of electronics and basic electronic devices, and introduce basic concepts in radio communication.
The course outcomes include applying circuit laws to solve DC and AC circuits, describing voltage amplifiers and instrumentation systems, and explaining radio and cellular communication principles. Assessment includes continuous tests and an end semester exam covering both electrical and electronics topics. The syllabus covers topics such as basic circuit concepts, magnetic circuits, signal analysis, semiconductor devices, amplifiers, and communication systems.
550663274
This document provides an overview of the contents of the book "CMOS Circuit Design, Layout, and Simulation" by R. Jacob Baker. The book covers CMOS design fundamentals including fabrication, SPICE simulation, layout of wells, metal layers, active/poly layers, resistors, capacitors, MOSFETs, and covers topics like inverters, logic gates, clocked circuits, memory circuits and more. It includes chapters written by other authors on CMOS fabrication processes and electrical noise.
Similar to Chapter2 question bank (20)
Hsc physics revision for semiconductors and communication
Hsc physics revision for semiconductors and communication
R05010204 E L E C T R O N I C D E V I C E S A N D C I R C U I T S
R05010204 E L E C T R O N I C D E V I C E S A N D C I R C U I T S
Lecture 4 4521 semiconductor device physics - metal-semiconductor system
Lecture 4 4521 semiconductor device physics - metal-semiconductor system
Analog & Digital Integrated Circuits (Question Bank)
Analog & Digital Integrated Circuits (Question Bank)
Basics of electrical_and_electronics-2019-syllabus-ktustudents.in
Basics of electrical_and_electronics-2019-syllabus-ktustudents.in
More from HarshitParkar6677
Wi fi hacking
Chances are you have a Wi-Fi network at home, or live close to one (or more) that tantalizingly pops up in a list whenever you boot up the laptop.
The problem is, if there's a lock next to the network name (AKA the SSID, or service set identifier), that indicates security is activated. Without the password or passphrase, you're not going to get access to that network, or the sweet, sweet internet that goes with it.
D dos attack
A distributed denial-of-service (DDoS) attack is a malicious attempt to disrupt normal traffic of a targeted server, service or network by overwhelming the target or its surrounding infrastructure with a flood of Internet traffic. DDoS attacks achieve effectiveness by utilizing multiple compromised computer systems as sources of attack traffic. Exploited machines can include computers and other networked resources such as IoT devices. From a high level, a DDoS attack is like a traffic jam clogging up with highway, preventing regular traffic from arriving at its desired destination.
Notes chapter 6
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Interface notes
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Chapter6 2
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Chapter6
There are two methods for interfacing memory and I/O devices with a microprocessor: I/O mapped I/O and memory mapped I/O. I/O mapped I/O treats I/O devices and memory separately, while memory mapped I/O treats I/O devices as memory. I/O mapped I/O can use either 8 or 16 address lines, allowing connection of up to 256 fixed I/O devices or 65,536 variable I/O devices. Specific instructions like IN, OUT, and MOV are used to access I/O ports depending on whether it is fixed or variable addressing.
8086 cpu 1
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Chapter 6 notes
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Chapter 5 notes
This document discusses procedures, macros, and stack operations in assembly language. It explains that procedures allow repetitive code to be written once and called multiple times to save memory. Procedures use stack operations to push return addresses and data onto the stack. Macros simplify programming by reducing repetitive code. Procedures are called at runtime, while macro calls are replaced with their body at assembly time.
Chap6 procedures & macros
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together.
Chapter 5 notes new
Procedures and macros allow code to be reused in assembly language programs. Procedures are subroutines that are called using CALL and RET instructions. Macros allow short, repetitive code sequences to be defined once and reused by replacing the macro call with its body code. Some key differences are that procedures occupy less memory than macros since macro code is generated each time, while procedures' code is only stored once. Procedures are accessed using CALL while macros are accessed by name.
Notes arithmetic instructions
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Notes all instructions
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Notes aaa aa
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Notes 8086 instruction format
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Misc
This document describes the Jcc family of conditional jump instructions in x86 assembly language. It provides the instruction name, description of the condition tested, and any alternative mnemonics or opposite instructions. The instructions test various CPU flags like carry, zero, sign, overflow, parity, and compare values based on signed or unsigned arithmetic.
Copy of 8086inst logical
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Copy of 8086inst logical
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Chapter3 program flow control instructions
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
Chapter3 8086inst stringsl
A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. Some microprocessors in the 20th century required several chips. Microprocessors help to do everything from controlling elevators to searching the Web. Everything a computer does is described by instructions of computer programs, and microprocessors carry out these instructions many millions of times a second. [1]
Microprocessors were invented in the 1970s for use in embedded systems. The majority are still used that way, in such things as mobile phones, cars, military weapons, and home appliances. Some microprocessors are microcontrollers, so small and inexpensive that they are used to control very simple products like flashlights and greeting cards that play music when you open them. A few especially powerful microprocessors are used in personal computers.
More from HarshitParkar6677 (20)
Recently uploaded
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Chapter2 question bank
- 1. Chapter 2 Question Bank 1. Explain the formation of depletion layer in PN junction with neat sketch. (4) 2. Describe the operation of PN junction diode. Under forward biased and Reverse Biased condition. (4) 3. Define the following terms with respect to PN junction diode. (Each 1M) a. Static resistance b. Dynamic resistance c. Cut-in voltage d. Breakdown voltage e. Depletion Layer f. Barrier Potential (Junction Potential) 4. Draw the VI characteristics of forward biased condition. Define cut-in voltage. (4M) 5. Explain the operating principle of PN junction diode under forward bias condition. Draw VI characteristics. (4) 6. What is depletion region for diode? (2) 7. Explain the VI characteristics of a Zener diode and explain. (4) 8. Draw and explain a neat sketch of a P-N junction with no bias. Explain the terms barrier potential and depletion region. (4) 9. State the value of knee voltage for silicon & Germanium Diode. (1) 10.Write the VI characteristics of Ideal diode. (2) 11.Define static resistance and Dynamic resistance. (2) 12.Explain Avalanche breakdown. (3) 13.Explain Zener breakdown in Zener diode. Write the symbol of Zener diode. (3) 14.Compare Zener breakdown with avalanche breakdown (4 points) (4)