The document discusses the importance of including equipment operators in Reliability Centered Maintenance (RCM) analysis. Operators play a key role by identifying important failure modes that others may overlook related to equipment operation. They can provide valuable details in failure effect statements about process impacts. Operators also help determine downtime from failures and identify mitigation tasks, such as process monitoring, that are effective at improving reliability. The document argues that excluding operators results in an incomplete RCM analysis.
10 Things an Operations Supervisor can do Today to Improve ReliabilityRicky Smith CMRP, CMRT
Continuing the series that started with maintenance technicians and supervisors, if you are new to the position of Operations Supervisor, what are some of the things you can begin working on immediately to improve reliability within the area you work?
Most companies don’t measure mean time between failures (MTBF), even though it’s the most basic measurement that quantifies reliability. MTBF is the average time an asset functions before it fails. So, why don’t they measure MTBF? Let’s define reliability first before we go any further.
Reliability: The ability of an item to perform a required function under stated conditions for a stated period of time
So why don’t we measure Mean Time Between Failure. This articles discusses this issue.
Does it annoy you that in spite of regularly performing Preventive Maintenance (PM) on your equipment it continues to breakdown? Some may call this insanity – Continuing to do the same thing over and over, expecting a different result. So what do you do? Maybe take a close look at your current PM Program.
There are known best practices which will not only enhance your PM program but also increase equipment reliability. Remember most work comes from PM and PdM and then it must be planned correctly, scheduled with production, executed to schedule and to specifications. If this occurs you will be seeing the results. "less breakdowns"
Check out this article and post your comments please.
Maintenance Skills Training for industry is a hot subject right now. In many areas of the country, companies are competing for skilled maintenance personnel.
“A Deloitte study found that the skills gap may leave an estimated 2.4 million positions unfilled between 2018 and 2028, with a potential economic impact of $2.5 trillion”
The skill level of the maintenance personnel in most companies is well below what industry would say is acceptable. In the past, I have been involved with the assessment of the skill level for hundreds of maintenance personnel in the U.S. and Canada and found 80% of the people assessed scored less than 50% of where they need to be in the basic technical skills to perform their jobs. The literacy level of maintenance personnel is also a problem. In some areas of the United States we find that up to 40% of maintenance personnel in a plant are reading below the eighth grade level. After performing the Gunning FOG index, we find the reading level for mechanical maintenance personnel should be the twelfth year level and electrical maintenance personnel the fourteenth year level (associate degree).
Precision Maintenance is talked about in many companies and implemented at many companies, many with great success, however most companies do not understand Precision Maintenance. In this paper I will clear up some misconceptions and untruths concerning it.
The concepts contained within Lean Manufacturing are not limited merely to production systems. These concepts translate directly into the world of maintenance and reliability.
At the core of Lean Manufacturing philosophy is the concept of elimination of waste. It is about getting precisely the right resources to precisely the right place and at the right time to make only the necessary products in the most efficient manner possible.
The concepts of the elimination of waste can be easily traced to Benjamin Franklin. Poor Richard encouraged the concepts of elimination of waste in numerous ways. Adages like “Waste not, want not”, “A penny
saved is two pence clear…Save and have” and “He that idly loses 5s. [shillings] worth of time, loses 5s., and might as prudently throw 5s. into the river.” Yes, it was Benjamin Franklin that educated us about the possibility that avoiding unnecessary costs could return more profit than simply increasing total sales.
It was Henry Ford who took the concept of the elimination of waste and integrated it into daily operations at his manufacturing facilities. Mr. Ford’s attitude can be seen in his books, “My Life and Work” (1922) and in “Today and Tomorrow” (1926) where he describes the folly of waste and introduces the world to Just-In-Time manufacturing. Mr. Ford cites inspiration from Benjamin Franklin as part of the foundation of these concepts.
However, it wasn’t until Toyota’s Chief Engineer, Taiichi Ohno systematized these concepts and the concept of pull (Kanban) into the Toyota Production System and created a cohesive production philosophy that was focused on the elimination of waste, that the world was able to see the real power of Lean Manufacturing. Interestingly enough, when Mr. Ohno was asked about the inspiration of his system, he merely laughed and said he read most of it in Henry Ford’s book.
Part 1 of this report will focus on one very specific Lean Manufacturing method known as 5S. This section will detail how a 5S initiative focusing on a plant’s Preventive Maintenance (PM) Program can immediately unlock resources within that maintenance department and make the PM process significantly more effective and efficient. Part 2 will look at the Deadly Wastes (Muda) of manufacturing and how elimination of these wastes is also a focus of the reliability process. Part 3 will discuss the overall objectives of Lean Manufacturing and parallel them with the overall objectives of the reliability process. Part 4 will discuss Poka- Yoke (mistake proofing) and see how several standard maintenance techniques are, in fact, Poka-Yoke techniques. A brief discussion of Kaizen and how both Lean Manufacturing and Maintenance and Reliability initiatives share these very same goals and objectives will summarize the entire report.
10 Things an Operations Supervisor can do Today to Improve ReliabilityRicky Smith CMRP, CMRT
Continuing the series that started with maintenance technicians and supervisors, if you are new to the position of Operations Supervisor, what are some of the things you can begin working on immediately to improve reliability within the area you work?
Most companies don’t measure mean time between failures (MTBF), even though it’s the most basic measurement that quantifies reliability. MTBF is the average time an asset functions before it fails. So, why don’t they measure MTBF? Let’s define reliability first before we go any further.
Reliability: The ability of an item to perform a required function under stated conditions for a stated period of time
So why don’t we measure Mean Time Between Failure. This articles discusses this issue.
Does it annoy you that in spite of regularly performing Preventive Maintenance (PM) on your equipment it continues to breakdown? Some may call this insanity – Continuing to do the same thing over and over, expecting a different result. So what do you do? Maybe take a close look at your current PM Program.
There are known best practices which will not only enhance your PM program but also increase equipment reliability. Remember most work comes from PM and PdM and then it must be planned correctly, scheduled with production, executed to schedule and to specifications. If this occurs you will be seeing the results. "less breakdowns"
Check out this article and post your comments please.
Maintenance Skills Training for industry is a hot subject right now. In many areas of the country, companies are competing for skilled maintenance personnel.
“A Deloitte study found that the skills gap may leave an estimated 2.4 million positions unfilled between 2018 and 2028, with a potential economic impact of $2.5 trillion”
The skill level of the maintenance personnel in most companies is well below what industry would say is acceptable. In the past, I have been involved with the assessment of the skill level for hundreds of maintenance personnel in the U.S. and Canada and found 80% of the people assessed scored less than 50% of where they need to be in the basic technical skills to perform their jobs. The literacy level of maintenance personnel is also a problem. In some areas of the United States we find that up to 40% of maintenance personnel in a plant are reading below the eighth grade level. After performing the Gunning FOG index, we find the reading level for mechanical maintenance personnel should be the twelfth year level and electrical maintenance personnel the fourteenth year level (associate degree).
Precision Maintenance is talked about in many companies and implemented at many companies, many with great success, however most companies do not understand Precision Maintenance. In this paper I will clear up some misconceptions and untruths concerning it.
The concepts contained within Lean Manufacturing are not limited merely to production systems. These concepts translate directly into the world of maintenance and reliability.
At the core of Lean Manufacturing philosophy is the concept of elimination of waste. It is about getting precisely the right resources to precisely the right place and at the right time to make only the necessary products in the most efficient manner possible.
The concepts of the elimination of waste can be easily traced to Benjamin Franklin. Poor Richard encouraged the concepts of elimination of waste in numerous ways. Adages like “Waste not, want not”, “A penny
saved is two pence clear…Save and have” and “He that idly loses 5s. [shillings] worth of time, loses 5s., and might as prudently throw 5s. into the river.” Yes, it was Benjamin Franklin that educated us about the possibility that avoiding unnecessary costs could return more profit than simply increasing total sales.
It was Henry Ford who took the concept of the elimination of waste and integrated it into daily operations at his manufacturing facilities. Mr. Ford’s attitude can be seen in his books, “My Life and Work” (1922) and in “Today and Tomorrow” (1926) where he describes the folly of waste and introduces the world to Just-In-Time manufacturing. Mr. Ford cites inspiration from Benjamin Franklin as part of the foundation of these concepts.
However, it wasn’t until Toyota’s Chief Engineer, Taiichi Ohno systematized these concepts and the concept of pull (Kanban) into the Toyota Production System and created a cohesive production philosophy that was focused on the elimination of waste, that the world was able to see the real power of Lean Manufacturing. Interestingly enough, when Mr. Ohno was asked about the inspiration of his system, he merely laughed and said he read most of it in Henry Ford’s book.
Part 1 of this report will focus on one very specific Lean Manufacturing method known as 5S. This section will detail how a 5S initiative focusing on a plant’s Preventive Maintenance (PM) Program can immediately unlock resources within that maintenance department and make the PM process significantly more effective and efficient. Part 2 will look at the Deadly Wastes (Muda) of manufacturing and how elimination of these wastes is also a focus of the reliability process. Part 3 will discuss the overall objectives of Lean Manufacturing and parallel them with the overall objectives of the reliability process. Part 4 will discuss Poka- Yoke (mistake proofing) and see how several standard maintenance techniques are, in fact, Poka-Yoke techniques. A brief discussion of Kaizen and how both Lean Manufacturing and Maintenance and Reliability initiatives share these very same goals and objectives will summarize the entire report.
Why do people not understand the P-F Curve? At a recent maintenance function, I asked 70 maintenance and reliability professionals how many of them had heard of the P-F Curve and only about 10% stated they had. From that 10%, only 1% felt like they truly understood it. This was shocking to me. I assumed everyone had heard about the P-F Curve and its intent.
The intent of the P-F Curve is to illustrate how equipment fails and how early detection of a failure provides time to plan and schedule the replacement or restoration of a failing part without interruption to production or operations.
Once you understand the P-F or PF Curve you will have a better awareness of how equipment fails.
Reliability Centered Maintenance (RCM) is a proven, logical, sensible approach that helps companies improve reliability. Yet most companies are not getting the return they expected. They see RCM as too much trouble for too little reward. So that’s why we decided to publish this new report. Find out why RCM doesn't work, what needs to change and how to put RCM to work at your company so it doesn't become another Resource Consuming Monster.
We know RCM works however I wanted to share with you the 5 Biggest Mistakes people make using Reliability Centered Maintenance. Love to hear your comments or tell us what you have seen work and not work.
"A great Maintenance Manager sees the relationship of poor performance and the lack of good maintenance routines."
"Poor performance always leads to the lack of maintenance routines or poor execution of existing routines."
- Rick Mullen, Global Reliability Leader, AB-InBev
“My maintenance staff is highly trained and do not like using procedures.” If the statement is valid, and the cost of asset failure is not important to our operation, then your staff must have an unlimited and infallible memory – congratulations!
Did you know that the most complex equipment ever built was a nuclear submarine and that the first nuclear submarines experienced failures due to lack of effective procedures, thus ending in catastrophic failure?
If safety is number one in your organization, then repeatable, effective work procedures should be as well.
A proactive maintenance technician is a highly trained professional who is an expert in his or her skills area, has knowledge of other skills areas, including safety and production, and has a desire to learn more. This professional knows and can
implement a failure-modes driven maintenance strategy for any piece of equipment.
A proactive maintenance technician uses knowledge and experience to ensure the maintenance process is optimized by making constructive recommendations to
management concerning improvement areas.
To ensure success, a proactive maintenance technician is proactive in everything he or she does. This person constantly reviews information to ensure procedures are accurate and issues are resolved quickly and does what is required to ensure the work is repeatable. Such a professional leads by example and takes responsibility for training new employees on how to be a proactive and effective maintenance technician.
A DILO (Day In the Life Of)is a great way to begin the conversation of current state of a position and future state of it. I challenge everyone to sit down with their maintenance team and re-write what I have written for a Proactive Maintenance Tech.
How good is your organization at identifying failures? Sure you see failures when they occur, but can you identify when recurring failures are creating serious equipment reliability.
Lack of an effective PM program is destroying the credibility of our maintenance organizations. "The 1st step to solving a problem is knowing you have one". Focus must be on optimizing your current PM program (PdM Program next). View the slides and when you are ready contact me for your next step, rsmith@gpallied.com
As the industry has evolved, so have the practices and philosophies for how and when to perform maintenance and lubrication. More options and tools are now available to guide the actions of personnel for nearly all lubrication tasks.
Advanced Maintenance And Reliability (Maintenance and Reliability Best Pract...Ricky Smith CMRP, CMRT
Maintenance and reliability has taken great strides toward managing asset reliability by applying known best practices in maintenance and reliability finding that they can optimize reliability and reduce total cost and reduce risk by applying known best practices. However, if not most organizations are still trapped in the old way of thinking.
As Albert Einstein once said: "the significant problems we face cannot be solved with the same level of thinking we were at when we created them".
Preventive Maintenance - Actions performed on a time- or machine-run-based schedule that detect, preclude, or mitigate degradation of a component or system with the aim of sustaining or extending its useful life through controlling degradation to an acceptable level. (Definition Source: SMRP Best Practices)
Top Tips for Improving your Quality ManagementClaire Healey
An essential guide to assist you, the Quality Expert in enforcing the standards you expect on a daily basis across the whole manufacturing plant. Improve product quality, traceability and Statistical Process Control (SPC) whilst preventing mix-up and product recalls in manufacturing.
http://www.occupational-safety.com.au/
Dealing with dangers at work through an SWMS Hazards or even threats are a natural part of every single work place. Irrespective of the sort of work you are doing, you will always be faced with the possibility of accidents and traumas if you aren't careful enough. Catastrophes on the job can impact an enterprise in a very unfavorable manner; business operations gets postponed and the organization can go through huge financial cutbacks due to law suits. This is exactly why companies and business people should really make an SWMS or Safe Work Method Statement. This particular document will not just offer a way for businesses to safeguard their workers at work, but it will even keep them protected from any legal issues down the road. A Safe Work Method Statement is aimed to methodically document step-by-step procedures that are needed for a task or activity from start to finish. This document additionally details the way a job or task can be done safely and with the very least harm or damage to the environment. Safe Work Method Statements or perhaps SWMS need to contain the following information: * Description of how jobs or perhaps activities should be carried out * Pinpoints tasks or perhaps activities in the workplace which are regarded as “high-risk” or perhaps unsafe * Determines duties that are regarded as damaging to the environment * Outlines the control measures as well as safety procedures which is to be utilized on the work or task at hand * Gives an explanation of how the control measures will be put in place for the task or perhaps process to be done in a safe as well as effective method * Outlines the requirements, codes and legislations that has to be complied with * Describes the sort of devices used for the task/activity, the qualifications of the workers allotted to the job as well as the trainings required so that the work can be performed safely as well as efficiently. Safe Work Method Statements were originally designed for high-risk construction duties, yet nowadays other businesses have begun applying them also. Apart from enhancing safety in the workplace, there are more advantages which you can get from organizing an SWMS or Safe Work Method Statement for your company or business. They are enumerated down below: * Minimizes Any sort of accident-when workers are informed about safe work methods on the job, there will be fewer cases of accidents as well as untoward incidences taking place. Personnel will be safe and they'll get to concentrate on the job they do. * Boosts Efficiency-mishaps can either delay or even hamper particular activities in the workplace. Then again, by planning a safety management system that workers can abide by business operations will never be affected or even delayed therefore increasing productiveness. * Protects A Business Out of Bankruptcy-mishaps at work can cost a business lots of money especially if there are actually legal cases involved.
Using Safety to Drive Lean ImplementationPhil La Duke
This presentation was made during the Society of Manufacturing (SME) EASTEC Conference as part of the Lean and Green Symposium. May 19, 2008 by Phil La Duke. For more information on this topic contact Phil La Duke (Pladuke@oe.com) or visit www.safety-impact.com
Abusing the word "Reliability" was an annoying thing for me, it's not linked to submission date of a document nor the training programs, yes these procedure can help in undirect way to improve the reliability, but when you consider your reliability program sole on it, then you are not doing reliability anymore.
So i decided to express my anger in peaceful way and i hope it can be a postive too.
for that i'll start to write a post and i'll call it "Real Reliability" to bust the myth around reliability, and i'll start with my first enemy "MTBF".
This for all the fed up guys from the wrong usage of "Reliability"
Why do people not understand the P-F Curve? At a recent maintenance function, I asked 70 maintenance and reliability professionals how many of them had heard of the P-F Curve and only about 10% stated they had. From that 10%, only 1% felt like they truly understood it. This was shocking to me. I assumed everyone had heard about the P-F Curve and its intent.
The intent of the P-F Curve is to illustrate how equipment fails and how early detection of a failure provides time to plan and schedule the replacement or restoration of a failing part without interruption to production or operations.
Once you understand the P-F or PF Curve you will have a better awareness of how equipment fails.
Reliability Centered Maintenance (RCM) is a proven, logical, sensible approach that helps companies improve reliability. Yet most companies are not getting the return they expected. They see RCM as too much trouble for too little reward. So that’s why we decided to publish this new report. Find out why RCM doesn't work, what needs to change and how to put RCM to work at your company so it doesn't become another Resource Consuming Monster.
We know RCM works however I wanted to share with you the 5 Biggest Mistakes people make using Reliability Centered Maintenance. Love to hear your comments or tell us what you have seen work and not work.
"A great Maintenance Manager sees the relationship of poor performance and the lack of good maintenance routines."
"Poor performance always leads to the lack of maintenance routines or poor execution of existing routines."
- Rick Mullen, Global Reliability Leader, AB-InBev
“My maintenance staff is highly trained and do not like using procedures.” If the statement is valid, and the cost of asset failure is not important to our operation, then your staff must have an unlimited and infallible memory – congratulations!
Did you know that the most complex equipment ever built was a nuclear submarine and that the first nuclear submarines experienced failures due to lack of effective procedures, thus ending in catastrophic failure?
If safety is number one in your organization, then repeatable, effective work procedures should be as well.
A proactive maintenance technician is a highly trained professional who is an expert in his or her skills area, has knowledge of other skills areas, including safety and production, and has a desire to learn more. This professional knows and can
implement a failure-modes driven maintenance strategy for any piece of equipment.
A proactive maintenance technician uses knowledge and experience to ensure the maintenance process is optimized by making constructive recommendations to
management concerning improvement areas.
To ensure success, a proactive maintenance technician is proactive in everything he or she does. This person constantly reviews information to ensure procedures are accurate and issues are resolved quickly and does what is required to ensure the work is repeatable. Such a professional leads by example and takes responsibility for training new employees on how to be a proactive and effective maintenance technician.
A DILO (Day In the Life Of)is a great way to begin the conversation of current state of a position and future state of it. I challenge everyone to sit down with their maintenance team and re-write what I have written for a Proactive Maintenance Tech.
How good is your organization at identifying failures? Sure you see failures when they occur, but can you identify when recurring failures are creating serious equipment reliability.
Lack of an effective PM program is destroying the credibility of our maintenance organizations. "The 1st step to solving a problem is knowing you have one". Focus must be on optimizing your current PM program (PdM Program next). View the slides and when you are ready contact me for your next step, rsmith@gpallied.com
As the industry has evolved, so have the practices and philosophies for how and when to perform maintenance and lubrication. More options and tools are now available to guide the actions of personnel for nearly all lubrication tasks.
Advanced Maintenance And Reliability (Maintenance and Reliability Best Pract...Ricky Smith CMRP, CMRT
Maintenance and reliability has taken great strides toward managing asset reliability by applying known best practices in maintenance and reliability finding that they can optimize reliability and reduce total cost and reduce risk by applying known best practices. However, if not most organizations are still trapped in the old way of thinking.
As Albert Einstein once said: "the significant problems we face cannot be solved with the same level of thinking we were at when we created them".
Preventive Maintenance - Actions performed on a time- or machine-run-based schedule that detect, preclude, or mitigate degradation of a component or system with the aim of sustaining or extending its useful life through controlling degradation to an acceptable level. (Definition Source: SMRP Best Practices)
Top Tips for Improving your Quality ManagementClaire Healey
An essential guide to assist you, the Quality Expert in enforcing the standards you expect on a daily basis across the whole manufacturing plant. Improve product quality, traceability and Statistical Process Control (SPC) whilst preventing mix-up and product recalls in manufacturing.
http://www.occupational-safety.com.au/
Dealing with dangers at work through an SWMS Hazards or even threats are a natural part of every single work place. Irrespective of the sort of work you are doing, you will always be faced with the possibility of accidents and traumas if you aren't careful enough. Catastrophes on the job can impact an enterprise in a very unfavorable manner; business operations gets postponed and the organization can go through huge financial cutbacks due to law suits. This is exactly why companies and business people should really make an SWMS or Safe Work Method Statement. This particular document will not just offer a way for businesses to safeguard their workers at work, but it will even keep them protected from any legal issues down the road. A Safe Work Method Statement is aimed to methodically document step-by-step procedures that are needed for a task or activity from start to finish. This document additionally details the way a job or task can be done safely and with the very least harm or damage to the environment. Safe Work Method Statements or perhaps SWMS need to contain the following information: * Description of how jobs or perhaps activities should be carried out * Pinpoints tasks or perhaps activities in the workplace which are regarded as “high-risk” or perhaps unsafe * Determines duties that are regarded as damaging to the environment * Outlines the control measures as well as safety procedures which is to be utilized on the work or task at hand * Gives an explanation of how the control measures will be put in place for the task or perhaps process to be done in a safe as well as effective method * Outlines the requirements, codes and legislations that has to be complied with * Describes the sort of devices used for the task/activity, the qualifications of the workers allotted to the job as well as the trainings required so that the work can be performed safely as well as efficiently. Safe Work Method Statements were originally designed for high-risk construction duties, yet nowadays other businesses have begun applying them also. Apart from enhancing safety in the workplace, there are more advantages which you can get from organizing an SWMS or Safe Work Method Statement for your company or business. They are enumerated down below: * Minimizes Any sort of accident-when workers are informed about safe work methods on the job, there will be fewer cases of accidents as well as untoward incidences taking place. Personnel will be safe and they'll get to concentrate on the job they do. * Boosts Efficiency-mishaps can either delay or even hamper particular activities in the workplace. Then again, by planning a safety management system that workers can abide by business operations will never be affected or even delayed therefore increasing productiveness. * Protects A Business Out of Bankruptcy-mishaps at work can cost a business lots of money especially if there are actually legal cases involved.
Using Safety to Drive Lean ImplementationPhil La Duke
This presentation was made during the Society of Manufacturing (SME) EASTEC Conference as part of the Lean and Green Symposium. May 19, 2008 by Phil La Duke. For more information on this topic contact Phil La Duke (Pladuke@oe.com) or visit www.safety-impact.com
Abusing the word "Reliability" was an annoying thing for me, it's not linked to submission date of a document nor the training programs, yes these procedure can help in undirect way to improve the reliability, but when you consider your reliability program sole on it, then you are not doing reliability anymore.
So i decided to express my anger in peaceful way and i hope it can be a postive too.
for that i'll start to write a post and i'll call it "Real Reliability" to bust the myth around reliability, and i'll start with my first enemy "MTBF".
This for all the fed up guys from the wrong usage of "Reliability"
You wonder sometimes, is Reliability the same as Availability. Here's a sample, showing 2 ways to calculate Availability. (They are not the same, but at times we think so.)
Draft comparison of electronic reliability prediction methodologiesAccendo Reliability
A draft version of the paper that was eventually published as “J.A.Jones & J.A.Hayes, ”A comparison of electronic-reliability prediction models”, IEEE Transactions on reliability, June 1999, Volume 48, Number 2, pp 127-134”
Provide with the kind permission of the author, J.A.Jones
Solar trackers are the foundation of a utility-scale solar plant and their reliability affects energy production, uptime, and O&M costs; significantly impacting the economics of a project. In the near future it will become increasingly important for solar asset owners and investors to take tracker reliability into consideration. For tracker vendors, providing proven reliability and overall bankability of their systems will be a critical differentiator moving forward.
Reliability Maintenance Engineering Day 2 session 2 Reliability Techniques
day live course focused on reliability engineering for maintenance programs. Introductory material and discussion ranging from basic tools and techniques for data analysis to considerations when building or improving a program.
How to Reduce your MTTI/MTTR with a Single ClickSumo Logic
Learn how Sumo Logic enables users to drastically reduce MTTI and MTTR with a single click. In this deck, we cover:
- The power of log analytics for faster troubleshooting and root-cause analysis
- How machine learning & pattern recognition enable faster MTTI and MTTR
- How Sumo Logic's LogReduce and LogCompare features are helping users gain better control of their applications
Zero Downtime Architectures based on JEE platform. Almost every big enterprise with online business tries to design its applications in a way that they are always online. But is it also the case when we upgrade the database cluster? When we switch the whole data center? Based on a customer project we try to present common architecture principles that enable you to do all this without any service interruption and the most important: without any stress.
For technical services and project people, the course gives an in site into the right selection of a machine, How to draft a
procurement specification of a compressor. They are exposed to the method of performance evaluation, understanding
performance curves operational issues like parallel operation and evaluate the machine performance from site operating data.
For Operational people, this course gives an exposure to understand surging, choking and off design operation of the
machine. Operational care required for the typical services will help them to understand the more reliable operation and help
them to take immediate corrective actions.
For maintenance people. they will get an exposure to the constructional aspects and help them to ensure proper assembly and diagnose the mechanical problems and those of the operational problems caused by mechanical malfunctioning.
Reliability Centred Maintenance is a process used to determine what must be done to ensure that any physical asset continues to fulfil its intended functions in its present operating context.
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptxSamuel Gher
Two effective theories for maximising equipment care are Reliability-Centered Maintenance (RCM) and Total Productive Maintenance (TPM). Using a data-driven methodology, RCM assigns specific maintenance activities based on the prioritisation of important equipment and the analysis of possible breakdowns. Imagine it like a specialised physician locating and treating particular weak points. TPM, on the other hand, uses employee engagement to promote a continuous improvement culture. Everyone assumes responsibility for maintaining the equipment, from operators doing routine upkeep to quality specialists identifying the underlying causes of defects, much like a well-trained team. Both strive for maximum equipment efficiency, while TPM places more emphasis on cultural change and RCM emphasises accuracy. The best strategy for you will rely on your unique requirements. TPM works best with widespread participation, while RCM excels with vital equipment. In the end, integrating these ideas can result in a really strong
Precision Maintenance is talked about in many companies and implemented at many companies, many with great success, however most companies do not understand Precision Maintenance. In this paper I will clear up some misconceptions and untruths concerning it.
It saves more then it costs....
Preventive maintenance and reactive maintenance are an extremely critical part of any fleet operations. By creating a Preventive Maintenance program to decrease the incidents of equipment arriving late for the PM’s they are due for, this program can be an integral part of cost savings and reduction of equipment downtime for repairs.
Reliability Centered Maintenance (RCM) and Total Productive Maintenance (TPM)...Flevy.com Best Practices
More Information:
https://flevy.com/browse/business-document/reliability-centered-maintenance-rcm-and-total-productive-maintenance-tpm--2-day-presentation-1081
BENEFITS OF DOCUMENT
Improve reliability of plant & equipment
Measure the machine performance losses and understand better
Introduce autonomous maintenance
DOCUMENT DESCRIPTION
Reliability Centered Maintenance and Total Productive Maintenance presentation is intended to help as a 2-day workshop material for Operations and Maintenance personnel.
This presentation consists of over 200 slides and comprises of the following:
Group Activity - Define Maintenance Excellence
Maintenance Excellence - Activity
What is RCM?
Objective & goal of RCM
Techniques employed by RCM
Primary RCM Principles
Types of Maintenance Tasks
RCM Considerations, Applicability + Benefits
Steps in RCM Implementation
TPM vision, definition, origins, principles
8 Pillars of TPM
TPM Self-Assessment
Autonomous maintenance
Equipment & Process Improvement
Equipment Losses, Manpower & Material Losses
OEE - what it is & Calculations
Activity OEE Calculation
Other pillars of TPM
TPM Implementation - 12 steps
Benefits & OEE Tracker
Proactive Maintenance Analysis
Liaison with Ops, Communicating OEE,
Group Activity - OEE Communication/Importance
Ops. Skills, Cleanliness,
Monitoring - Gauges, Lubrication, Contamination, Vibration, One point Lesson
Activity - Maintenance / Operations
Analysis of Maintenance History, MTBF and its calculation
Activity - MTBF Calculation
Improving Equipment performance
FMEA, Types, Calculating RPN
The ultimate guide on constructing a FMEA process for Manufacturing, Maintenance, Services and Design.
The presentation include step by step on how to determine the failure modes, failure effects, assign severity, assign occurrence, assign detection, calculate risk priority numbers and prioritize the RPNs for action. With some examples and illustrations.
Presentation contents:
1. Determing failure modes, effects and causes.
2. FMEA team & team leader.
3. Brainstorming.
4. The basic steps of FMEA.
5. Examples.
Similar to Asset Reliability Begins With Your Operators (20)
Having experience as a Maintenance Manager and Maintenance Consultant I wrote this article. The one Maintenance Manager that inspired me the most was Rick Mullen, former Engineering and Maintenance Manager at Anheuser Busch, who by far the #1 Maintenance Manager I ever met.
What does a "Day in the Life of a Proactive Maintenance Planner" look like. This article was writen based on my experience at Alcoa Mt Holly (Certified as World Class Maintenance).
Having worked with companies all over the world I decided to write this article based on my experience as a Maintenance Advisor and a Maintenance Leader.
How to know if your maintenance planning and scheduling is not effectiveRicky Smith CMRP, CMRT
Many times companies have Maintenance Planning and Scheduling however it is not effective as they like it to be. This article helps anyone who is struggling the Planning and Scheduling with a few ideas.
If you have questions email me at rsmith@worldclassmaintenance.org
Ever wondered what a "Day in the Life of a Proactive Maintenance Supervisor". Checkout this article and see how it matching where you are. If you have questions send Ricky an email to rsmith@worldclassmaintenance.org
The objective of the Parts Checkout process to ensure the right part is in stock when required by Maintenance / Operations to provide Production with Reliable Assets.
> Parts / Material Checkout Guiding Principles:
•All parts/material used for an asset will be charge to the asset via a Work Order
•No blanket work orders – blanket work orders lead to lack of failure information due to failure threads of like parts/material
•Overnight ordering of parts is an exception and not the general rule
•The Materials Management Process will be managed with Leading and Lagging KPIs
... and so much more
Best Maintenance Lubrication Practices are essential to
optimal life for ball and rolling element bearings.
There are four factors that are important when
lubricating bearings:
1. What type of lubrication?
2. How much lubrication?
3. How frequently should lubrication be applied?
4. How should the lubrication be applied to ensure
contamination control?
... and so much more covered on this document
Maintenance Planning and Scheduling is critical to success of any Maintenance Organization resulting in a significant increase in Wrench-time (Hands on Tool Time). Planning and Scheduling are two distinct functions which are dependent on each other.
Top 7 Reasons why Maintenance Work Orders are Closed Out AccuratelyRicky Smith CMRP, CMRT
Closing out work orders accurately is critical for leadership to make the “right decisions at the right time with accurate data” and it can only occur if work orders are “Closed with the Right Information/Data”.
If metrics and Key Performance Indicators are so important where are people pulling the data from without their work orders having the right data on them when they are closed into that dark hole called the CMMS or EAM.
Without good data you are lost and probably are making decisions based on passion and not facts.
Very few organizations pay attention to hydraulic leaks and how they can impact production capacity, asset reliability, and reactivity when a mitigation strategy is in place.
This Tool Box Talk may help you take that next step.
Most companies spend a lot of money training their maintenance personnel to troubleshoot a hydraulic system.
If we focused on preventing system failure then we could spend less time and money on troubleshooting a hydraulic system. We normally except hydraulic system failure rather than deciding not to except hydraulic failure as the norm. Let’s spend the time and money to eliminate hydraulic failure rather than preparing for failure.
Much has been written about lean manufacturing and the lean enterprise—enough that nearly all readers are familiar with the concepts as well as the phrases themselves. But what about lean maintenance?
Is it merely a subset of lean manufacturing? Is it a natural fall-in-behind spinoff result of adopting lean manufacturing practices?
Much to the chagrin of many manufacturing companies, whose attempts at implementing lean practices have failed ignominiously, lean maintenance is neither a subset nor a spinoff of lean manufacturing. It is instead a prerequisite for success as a lean manufacturer. This article will explain why.
Every wondered what the life of a Proactive Maintenance Technician looks like. This article was written based on my experience as a Proactive Maintenance Technician.
How does anyone Optimize their current CMMS? What is the path forward to success with our CMMS. John Day, former Engineering / Maintenance Manager for Alcoa Mt Holly is quoted in this presentation.
Preventive Maintenance Best Practices plus PM Optimization Workshop BrochureRicky Smith CMRP, CMRT
Join Ricky Smith for his Preventive Maintenance Best Practices plus PM Optimization Workshop, October 19-21 "Live" and "Virtual" (via internet). Check out the attached brochure.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/