Chromatography is a technique used to separate and identify components in a mixture. It works by partitioning the components between a stationary and mobile phase. The affinity each component has for these phases determines how quickly it will move through the system. Main types of chromatography include paper chromatography, thin layer chromatography, column chromatography, gas-liquid chromatography, gas chromatography-mass spectrometry, and high performance liquid chromatography. Each method utilizes different stationary and mobile phases to separate unique mixtures. Chromatography finds applications in fields like forensic science, medicine, and quality control.
Mixtures of compounds are very common in Organic Chemistry. Most reactions produce more than one product. Naturally occurring materials are only rarely 100% pure. It is therefore desirable to have a simple, fast and efficient way to determine the purity of Organic mixtures. The separation of a mixture by passing it, in solution, over an adsorbent (such as Alumina or Silica Gel) is the basic idea of Chromatography. Chromatography is a very general phenomenon. It involves the passage of a mobile phase across a stationary phase in a column. Usually a mixture of compounds is present in the mobile phase
Mixtures of compounds are very common in Organic Chemistry. Most reactions produce more than one product. Naturally occurring materials are only rarely 100% pure. It is therefore desirable to have a simple, fast and efficient way to determine the purity of Organic mixtures. The separation of a mixture by passing it, in solution, over an adsorbent (such as Alumina or Silica Gel) is the basic idea of Chromatography. Chromatography is a very general phenomenon. It involves the passage of a mobile phase across a stationary phase in a column. Usually a mixture of compounds is present in the mobile phase
Paper chromatography is an analytical method used to separate coloured chemicals or substances.It is now primarily used as a teaching tool, having been replaced in the laboratory by other chromatography methods such as thin-layer chromatography (TLC).
It includes principle, mobile phase , stationary phase , mechanism of separation , types of paper chromatography, operating procedure, identification , detection , applications and limitations of paper chromatography
What is Chromatography?
Applications of Chromatography
Types of Chromatography
1- Column Chromatography
2- Planar chromatography
Paper Chromatography
Gas Chromatography
Detectors
Paper chromatography is an analytical method used to separate coloured chemicals or substances.It is now primarily used as a teaching tool, having been replaced in the laboratory by other chromatography methods such as thin-layer chromatography (TLC).
It includes principle, mobile phase , stationary phase , mechanism of separation , types of paper chromatography, operating procedure, identification , detection , applications and limitations of paper chromatography
What is Chromatography?
Applications of Chromatography
Types of Chromatography
1- Column Chromatography
2- Planar chromatography
Paper Chromatography
Gas Chromatography
Detectors
Band gap engineering of hybrid perovskites for solar cellsKiriPo
The research was conducted in summer 2014 under supervision of professor David Cahen at Optoelectronics Materials Group in Department of Materials and Interfaces at Weizmann Institute of Science (Rehovot, Israel).
Slides of my first invited talk at a conference, the ALD 2005 conference in San Jose 2005, about ALD modelling. ALD is fantastic, but fantastic is not perfect :)
---
R. L. Puurunen, Atomic-scale modelling of atomic layer deposition processes, American Vacuum Society Topical Conference on Atomic Layer Deposition (ALD 2005), San Jose, California, August 8-10, 2005. Invited talk.
Acids, Bases and Salts (Chemistry 'O' level)Faiz Abdullah
Chemistry 'O' level syllabus: Acids, Bases & Salts
Please download to access the animations that come with the slides. Some of the animations help to clear away hidden boxes.
Slides include interactive learning elements!!!
Contact me if you want more slides or to custom made for you at:
Email: fazzydoo@gmail.com
Facebook: Faiz Abdullah (look at picture)
Twitter: @fazzydoo
Igneous rocks formaion through chemical weatheringrita martin
Igneous rocks are generally termed as fire rocks formed either underground or above ground there are two types Intrusive, Extrusive igneous rocks mainly containing high silica content
Sebastiani - Nano-mechanical and microstructural characterization of MS-PVD N...thinfilmsworkshop
http://www.surfacetreatments.it/thinfilms
Nano-mechanical and microstructural characterization of MS-PVD Nb thin films (Marco Sebastiani - 30')
Speaker: Marco Sebastiani - Roma 3 University | Duration: 30 min.
Abstract
E. Bemporad1, M. Sebastiani1, F. Carassiti1
1Mechanical and Industrial Engineering Department, University of Rome ‘Roma Tre’, Via della Vasca Navale 79-00146 Rome, Italy
The main objective of the present study was to identify the influence of the applied bias voltage on the microstructural and mechanical properties of magnetron sputtering physical vapour deposition (MS-PVD) niobium thin films for use in superconducting resonant cavities for particle accelerators.
The microstructure and mechanical properties evolution as a function of the applied bias voltage and nature of the substrate (copper or quartz) were investigated by means of micro-hardness and nanoindentation testing, FIB/SEM, AFM and TEM techniques.
The superconducting properties (critical temperature Tc and residual resistivity) were determined by a calibrated four-contact probe and a cryogenic apparatus and then correlated to the mechanical properties.
Significant difference in terms of microstructure, surface roughness and mechanical properties were observed for biased coatings grown on different substrates. The observed differences are likely connected to the low conductivity of quartz that induces a re-sputtering effect and a consequent modification of the superconducting performances.
2. Chromatography
A technique for separating and identifying
components in a mixture.
Components have different affinities for two
phases: a stationary phase and a mobile
phase
A component which has a strong attraction for
the mobile phase will move quickly, while a
component with a strong attraction for the
stationary phase will be held back.
3. Main types of
chromatography
Paper chromatography
Thin layer chromatography (TLC)
Column chromatography
Gas-liquid chromatography (GLC)
Gas chromatography – mass spectrometry (GCMS)
High Performance Liquid Chromatography (HPLC)
4. Paper chromatography
Paper composed mostly of cellulose.
Polar due to hydroxyl groups
“Dry” paper is actually ~10% water (H-bonded to
–OH) groups
Polar water bonded to paper = stationary phase
Added solvent (eluent) = mobile phase
5. Paper chromatography
Small amt. mixture spotted onto paper
Starting point marked
Paper suspended in small quantity of solvent
(eluent)
Closed container (prevents solvent evaporation
& speeds process)
As solvent rises, components partition between
two phases bases on relative solubility.
Solvent front is marked at end of separation
Colored components can be seen/measured
Other components may be made visible with
stain (i.e. iodine or ninhydrin) or UV light
6. Paper chromatography
Each solute will have a constant
retention factor (Rf) for a given
eluent.
If two substances have similar Rf
values in one solvent, the paper can
be turned 90 and eluted with a
different solvent for further
separation.
Known as two-way chromatography
Often used to separate amino acids
7. Paper chromatography
Calculating solute retention factors:
Rf
distance moved by solute
distance moved by solvent (eluent)
R f(red)
R f(blue)
7.5 cm
10.0 cm
2.5 cm
10.0 cm
0 . 75
0 . 25
8. Paper chromatography
You try it… (caluclate the Rf values)
R f(cyan)
R f(magenta)
R f(yellow)
4.2 cm
4.5 cm
3.2 cm
4.5 cm
1.8 cm
4.5 cm
0 . 93
0 . 71
0 . 40
9. Thin layer chromatography
(TLC)
Similar to paper chromatography
Thin layer of a solid is painted
onto an inert support, such as
glass
Common solids:
• Alumina (Al2O3)
• Silica (SiO2)
10. Thin layer chromatography
(TLC)
When absolutely dry works by adsorption
However, like paper, silica and alumina are very
hygroscopic (water-loving) and therefore separation
occurs more by partition, with water as the
stationary phase.
Separated components can be recovered by
scraping off the section containing the component
and dissolving it in a suitable solvent.
12. Thin layer chromatography
(TLC)
Advantages of TLC over paper chromatography:
Approx. three times faster
More efficient – small samples can be separated and
components can easily be recovered in pure form
Results are more easily reproduced
Range of mixtures can be separated by changing mobile and
stationary phases
14. Column chromatography
Mixture dissolved in minimum
volume of solvent
Added to top of column
Sample is eluted (fresh solvent
added to the top to wash sample
down the stationary phase)
Components separated as they
travel at different rates – collected
at bottom as different fractions.
Solvent can also be changed to
elute more tightly held components.
16. Gas-liquid chromatography
(GLC)
Sample injected into oven where it is vaporized
Vapor carried by inert gas (mobile phase) over a non-volatile
liquid (stationary phase).
N2 and He are typical carrier gases
Long-chain alkanes w/ high b.p.’s supported on a SiO2
(glass) surface typically act as stationary phase
18. Gas-liquid chromatography
(GLC)
Used to identify components that can vaporize
without decomposition
Examples:
Illegal steroids and stimulants in urine
Blood-alcohol levels
Underground mine gases
19. Gas chromatography –
mass spectrometry (GCMS)
Like GLC, but employs mass spectrometry
instead of flame ionization detector at exit
point.
20. Gas chromatography –
mass spectrometry (GCMS)
Computer matches the spectra and gives a printout
of all components and their concentrations.
Very powerful tool and used extensively in forensic
science, medicine, etc.
Mass spectrometer is connected to a computer
which contains a library of the spectra of all known
compounds.
21. High Performance Liquid
Chromatography (HPLC)
Like LC (column chromatography) but employs
pressure instead of just gravity to force mobile
phase through column.
Stationary phase is typically silica with long-chain
alkanes adsorbed to surface,
Efficient separation, so long columns not needed.
Remember your liquid
chromatography lab with grape KoolAid?
sep-pak
C18
cartridge
22. High Performance Liquid
Chromatography (HPLC)
Separated components often detected via IR
spectroscopy.
Like GLC, results recorded onto chart showing
different retention times.
23. High Performance Liquid
Chromatography (HPLC)
• Can be used for ID as well as for separation
Can also be used to separate
enantiomers (chiral separation)
using columns containing optically
active material.
Other uses include analysis of oil
pollutants, alcoholic
beverages, food
(antioxidants, sugars and
vitamins), pharmaceuticals, polyme
rs, quality control of insecticides