Adhesives
•Download as PPTX, PDF•
2 likes•673 views
The properties of nonwoven fabrics depend greatly on the choice of fibers, production technology, and bonding process used. This leads to a wide range in properties, from crisp to soft fabrics that can be either durable or disposable. The bonding agents are important as they bind the fibers together firmly to give the nonwoven fabric its wear properties. Nonwoven fabrics are defined as fabrics made from a combination of fibers and bonding agents.
Report
Share
Report
Share
Recommended
Strength technologies for tissue makers
The consumer demand and stringent regulatory environment continue to challenge tissue makers and chemical suppliers, requiring unique quality attributes, more efficient chemical additives and environmentally friendly processes. The two key functional characteristics in the production of tissue and towel are dry and wet tensile strength that must be balanced to provide desired mechanical characteristics, handfeel softness and sufficient dispersibility in water when required. Kemira’s new developments in the strength area bring tissue makers a complete solution, allowing to achieve not only desired quality attributes and reduced environmental impact but also to help improve the efficiency and economics of their processes. In this paper, we will review the traditional and novel solutions for strength and demonstrate the benefits using laboratory data and industrial case studies.
Water Absorption, Thickness Swelling and Rheological Properties of Agro Fiber...
This document summarizes a study on the water absorption, thickness swelling, and rheological properties of composites made from high-density polyethylene (HDPE) reinforced with various agro fibers, including corncob, rice hull, walnut shell, and flax shive fibers. The corncob composites exhibited the highest water absorption and thickness swelling. The flax shive composites showed the lowest water absorption and thickness swelling. Rheological tests found that the corncob composites had the highest complex viscosity, storage modulus, and loss modulus, indicating greater resistance to deformation. The walnut shell composites exhibited the highest damping factor. In general, the study found significant differences in the hygro
Best in Packaging Films
Plastic films are used to wrap food related items like, candy, snacks, nutritional bars & powders. This presentation explains the different types of packaging films and the equipment used to wrap the films.
Coating and Lamination
This document discusses coating and laminating processes for paper and films. It describes several methods including extrusion coating, thermal laminating, wet bond laminating, dry bonding, solventless laminating, and extrusion laminating. Extrusion coating is commonly used to apply polyethylene to paperboard with benefits over wax coating like greater strength and moisture resistance. Laminating combines webs using thermal or chemical bonding with adhesives. Thermal laminating uses heat to bond adhesives while wet bond laminating relies on water or solvent. Dry bonding and solventless laminating avoid volatile organic compounds. The document also discusses factors in dry surface treatment coating like particle size and heat treatment to achieve an adequate coating layer.
Laminates1
Lamination is a technique used to manufacture materials in multiple layers to improve strength, stability, and appearance. Laminates are composite objects created by applying heat, pressure, or bonding to layers. Common laminates include laminated flooring, paper, and plastics. Laminates are tested for properties like peel strength, water resistance, and tensile strength. Polymer laminates offer advantages over other materials like being lighter weight and more durable. Standards exist for testing the strength and durability of laminated composites.
A Review on Water Absorption Behavior and its Effect on Mechanical Properties...
Composites are superior to conventional materials due to their high strength to weight ratio. Of late, because of environmental concerns, natural fibres are finding their places in composites. However, their hygroscopic nature affects the mechanical properties of the composites adversely. Applications of composites for decking, flooring and outdoor facilities have made it necessary to evaluate the water uptake characteristics of natural fibre composites. The objective of this paper is to review the water absorption behavior, its effect on mechanical properties and the efforts to reduce the absorption of various natural fibre reinforced composites.
JUTE FIBER WITH GLASS FIBER
A perfect PPT for jute fiber.
No need to edit again on this.
An executed project by own for final year project in B.Tech. and we got 100% result on this.
Try this for your review
Non asbestos fiber cement roofing system catalogue
Big Six Fiber Cement Corrugated Roof Tile
Middle Wave Fiber Cement Corrugated Roof Tile
Small Wave Fiber Cement Corrugated Roof Tile
Recommended
Strength technologies for tissue makers
The consumer demand and stringent regulatory environment continue to challenge tissue makers and chemical suppliers, requiring unique quality attributes, more efficient chemical additives and environmentally friendly processes. The two key functional characteristics in the production of tissue and towel are dry and wet tensile strength that must be balanced to provide desired mechanical characteristics, handfeel softness and sufficient dispersibility in water when required. Kemira’s new developments in the strength area bring tissue makers a complete solution, allowing to achieve not only desired quality attributes and reduced environmental impact but also to help improve the efficiency and economics of their processes. In this paper, we will review the traditional and novel solutions for strength and demonstrate the benefits using laboratory data and industrial case studies.
Water Absorption, Thickness Swelling and Rheological Properties of Agro Fiber...
This document summarizes a study on the water absorption, thickness swelling, and rheological properties of composites made from high-density polyethylene (HDPE) reinforced with various agro fibers, including corncob, rice hull, walnut shell, and flax shive fibers. The corncob composites exhibited the highest water absorption and thickness swelling. The flax shive composites showed the lowest water absorption and thickness swelling. Rheological tests found that the corncob composites had the highest complex viscosity, storage modulus, and loss modulus, indicating greater resistance to deformation. The walnut shell composites exhibited the highest damping factor. In general, the study found significant differences in the hygro
Best in Packaging Films
Plastic films are used to wrap food related items like, candy, snacks, nutritional bars & powders. This presentation explains the different types of packaging films and the equipment used to wrap the films.
Coating and Lamination
This document discusses coating and laminating processes for paper and films. It describes several methods including extrusion coating, thermal laminating, wet bond laminating, dry bonding, solventless laminating, and extrusion laminating. Extrusion coating is commonly used to apply polyethylene to paperboard with benefits over wax coating like greater strength and moisture resistance. Laminating combines webs using thermal or chemical bonding with adhesives. Thermal laminating uses heat to bond adhesives while wet bond laminating relies on water or solvent. Dry bonding and solventless laminating avoid volatile organic compounds. The document also discusses factors in dry surface treatment coating like particle size and heat treatment to achieve an adequate coating layer.
Laminates1
Lamination is a technique used to manufacture materials in multiple layers to improve strength, stability, and appearance. Laminates are composite objects created by applying heat, pressure, or bonding to layers. Common laminates include laminated flooring, paper, and plastics. Laminates are tested for properties like peel strength, water resistance, and tensile strength. Polymer laminates offer advantages over other materials like being lighter weight and more durable. Standards exist for testing the strength and durability of laminated composites.
A Review on Water Absorption Behavior and its Effect on Mechanical Properties...
Composites are superior to conventional materials due to their high strength to weight ratio. Of late, because of environmental concerns, natural fibres are finding their places in composites. However, their hygroscopic nature affects the mechanical properties of the composites adversely. Applications of composites for decking, flooring and outdoor facilities have made it necessary to evaluate the water uptake characteristics of natural fibre composites. The objective of this paper is to review the water absorption behavior, its effect on mechanical properties and the efforts to reduce the absorption of various natural fibre reinforced composites.
JUTE FIBER WITH GLASS FIBER
A perfect PPT for jute fiber.
No need to edit again on this.
An executed project by own for final year project in B.Tech. and we got 100% result on this.
Try this for your review
Non asbestos fiber cement roofing system catalogue
Big Six Fiber Cement Corrugated Roof Tile
Middle Wave Fiber Cement Corrugated Roof Tile
Small Wave Fiber Cement Corrugated Roof Tile
Nonwoven
The document discusses nonwoven fabrics. It defines nonwoven fabrics as textile structures produced by bonding or interlocking fibers using mechanical, chemical, thermal, or solvent bonding methods. It describes the two main stages of nonwoven fabric production as fiber preparation and web or batt formation, followed by the bonding process. The document also classifies nonwoven fabrics based on production methods such as wet bonding, dry bonding, spun bonding, and melt blowing. It provides examples of properties and applications of nonwoven fabrics.
Fibre Reinforced Plastic manufacturing methods
Composites manufacturing processes are complex, and involve combinations of the following physical processes:
1) Reinforcement Shaping
2) Resin Infusion
3) Composite Consolidation
Advantages and disadvantages of processing techniques
plastic composite manufacturing
Hand Lay-up
Spray up method
Filament winding
Match die molding
Pultrusion
Resin transfer molding
Reaction injection molding
Hand Lay-Up is well suited for low volume production of product.
This method can be used for both corrosion barrier and the structural portion
Fiber is chopped in a hand-held gun and fed into a spray of catalyzed resin directed at the mold. The deposited materials are left to cure under standard atmospheric conditions.
Composite resins
This document discusses the specifications and properties of dental composite materials according to ADA specification no. 27. It outlines the major and minor constituents of composites including the resin matrix, filler particles, and coupling agents. It also describes the advantages and disadvantages of composites, their mechanical properties, modes of curing, and factors that affect properties such as polymerization shrinkage, thermal expansion, water sorption, and radiopacity.
Unit –iii manufac of adv comp
This document discusses various methods for manufacturing advanced composites. It describes prepregs which are fibers preimpregnated with partially cured resin. It also discusses different manufacturing methods like hand layup, filament winding, and autoclave curing. Hand layup involves manually placing resin-soaked fibers in a mold. Filament winding uses continuous fibers wound around a rotating mandrel to form cylindrical parts. Autoclave curing uses heat and pressure in a large oven to fully cure large or complex composite parts.
Packaging Solutions through Partnership
Singular Packaging Technology offers a lightweight yet structurally strong foam box board called ECT 35 for packaging solutions. Made from FDA approved liquid paper and styrene sheets, ECT 35 is water proof, vapor resistant, insulated, and lighter than traditional corrugated options. It also provides shock protection for shipping. ArmorPack can custom manufacture boxes from this material in any size or design to reduce damage, labor costs, and inventory. Crush tests found the 1/4" thick ECT 35 foam box board withstood over 965 pounds of force, outperforming both single-wall and double-wall corrugated boxes. Singular is committed to sustainable packaging solutions and partnerships to reduce environmental impact.
Fabric Testing and quality control
This document discusses fabric testing and quality control in the textile industry. It outlines various fabric tests including thickness, thread density, weight, air permeability, stiffness, abrasion, pilling, water absorbency, repellency, and tensile strength. The objectives of testing are research, material selection, process and product control, and development, while quality control aims to manufacture quality products that meet customer demands at minimum cost and reduce wastage. Standard testing methods for each property are also provided.
Pm testing plastics
The document discusses various tests conducted on plastics used for packaging materials. It describes the three broad groups of tests - physical properties, physico-chemical properties, and optical properties. Several specific tests are outlined, including their significance, apparatus used, standards, and units of measurement. Key tests mentioned are haze, tensile strength and elongation, dart impact, heat seal strength, environmental stress crack resistance, and extractability.
M144 Ch03 Spec
The document discusses specialty polymeric products, focusing on polymeric fibers and films. It provides details on:
- The manufacture and types of polymeric fibers, including characterization methods. Fibers include rayon, acetate, olefinics, acrylics, and polyamides.
- The processes for forming monofilaments and fabrics from fibers, including wet spinning, dry spinning, and melt spinning.
- The various types and applications of polymeric films, including food packaging, mechanical packaging, and other uses. Film materials include cellulose, LDPE, HDPE, PP, PVC, and PET.
Thermoplastics : Introduction,classification,Processing & applications
The document discusses advanced manufacturing techniques using plastics and thermoplastics. It begins by describing some limitations of conventional materials and how plastics offer benefits like ease of manufacturing and versatility. It then classifies plastics into thermoplastics, thermosets and elastomers. The bulk of the document focuses on thermoplastics, describing their properties including glass transition temperature, behavior under temperature conditions, orientation, and water absorption. Examples of commonly used thermoplastics are provided along with applications and potential future developments in the field.
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...Kirubanandan Shanmugam
Synthetic packaging materials are neither reprocessable, renewable nor biodegradable barrier and also difficult to recycle into useful products. While cellulose-based packaging is widely known as a renewable, reprocessable, recyclable and biodegradable material it has limited air and water vapour barrier properties. Nanocellulose (NC) has the potential to become a renewable alternative to plastic packaging barrier layers but its recyclability has not been reported. This investigation is focused on the production of spray-coated nanocellulose (NC) films and its recyclability via dispersion in water and vacuum filtration to form sheets again. Physical properties such as barrier performance and strength of NC films have been evaluated pre- and post- recycling. The recycled films retained 80% of tensile strength and significant barrier performance although the H2O vapour permeability (WVP) approximately doubled, increasing to 9.83 x 10-11 g.m-1.s-1 Pa-1, providing comparable values with for most synthetic packaging. SEM micrographs reveal no fibre agglomeration at the micro level and no damage to the fibres during recycling. The retained strength and barrier properties and facile reprocessability of the spray coated NC film promises a sustainable and recyclable alternative to conventional packaging, providing a sustainable platform for packaging industries.02.multi layer composite films
The document discusses multi-layer composite films and the extrusion process used to produce them. It describes how multiple polymer layers from different extruders can be combined into a single film through a multi-manifold die. The film is then cooled on chill rollers before undergoing slitting, gauging, and winding into rolls. Properties like optical clarity and barrier performance can be optimized through adjustments to materials, temperatures, and processing speeds. Common polymers used include polyolefins like polyethylene and polypropylene.
Textile testing instrument
This document discusses textile testing instruments and their importance. It lists 33 different instruments used for testing various textile properties such as tensile strength, abrasion, color, moisture content, and others. Textile testing is crucial for the textile industry to ensure quality, monitor production, develop new products, and investigate faults. Without testing, quality cannot be guaranteed and profits will be reduced. A variety of instruments are needed to test the diverse range of textile material properties.
Composite manufacturing processes
Hand lay up, pre-preg, pressure molding, vacuum bagging, filament winding, pultusion, spray method, sheet molding, bulk molding and resin transfer molding
Polyester Fibers
This presentation summarizes key information about polyester fiber. It discusses that polyester is a synthetic polymer derived from the reaction of an alcohol and acid. The presentation provides microscopic views and describes the main types of polyester fibers, including polyethylene terephthalate and poly-1,4-cyclohexyline dimethylene terephthalate. It also outlines the manufacturing process of polyester filament and lists the physical and chemical properties of polyester fiber. Some common uses of polyester include clothing, home furnishings, and industrial applications like ropes and tires.
Evaluation of mechanical and water absorption behaviour of coir and rice husk...
The document evaluates the mechanical and water absorption behavior of composites reinforced with coconut coir fiber and rice husk powder. Composites were prepared with untreated and NaOH-treated coir fiber at different weight fractions (5%, 10%, 15%) combined with epoxy resin and rice husk powder. Mechanical tests for impact strength and hardness were conducted according to ASTM standards. Results showed untreated composites had higher impact strength and hardness than treated composites due to better fiber-matrix bonding. However, treated composites absorbed less water than untreated composites due to the hydrophobic nature of chemically-modified fiber. In conclusion, untreated composites performed better mechanically while treated composites were more resistant to water absorption.
Presentation on Industrial Manufacturing Process
This document provides an overview of industrial manufacturing processes and miscellaneous topics related to materials. It discusses the importance of materials in engineering and how different manufacturing methods can contribute to technological and socioeconomic development. Specific topics covered include plastics and composite materials, their properties and types. The document also discusses sources and remedies for contamination in the carpet and textile industry.
1
Polymers are long molecular chains made of repeating monomers. They can be thermosets that permanently harden, or thermoplastics that soften when heated. Composites contain fibers embedded in a polymer matrix to achieve properties neither material has alone. Fiber reinforced plastics are composites with fibers like glass, carbon, or aramid in a plastic matrix. The fibers increase strength and stiffness while the matrix binds them and transfers stress. Composites find applications where high strength and low weight are required.
Composite and bonding
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Composite structure manufacturing
This document discusses out of autoclave composite manufacturing and resin transfer molding (RTM) as alternative processes to traditional autoclave curing. RTM involves placing fiber reinforcement in a closed mold and injecting resin under pressure and heat without an autoclave. The resin cures as it flows through the mold. RTM produces high strength, lightweight composite parts with complex shapes. It is commonly used for aircraft, boat, and wind turbine components. The document provides overviews of RTM and out of autoclave processes, companies that use RTM, benefits, applications, and references for further information.
Slide polymer matrix (2)
The document discusses various methods for processing polymer matrix composites. It describes open molding processes like hand lay-up, spray-up, vacuum bagging, and filament winding which apply resin and fibers to a mold surface. It also covers closed molding processes like compression, injection, and pultrusion molding which use two-piece molds. Key factors in selecting a process include the materials, part geometry, and production quantities. Each method has advantages for different applications like boats, tubs, or structural panels.
Bonded, Laminated & Bonded fabric (1).pptx
jgvvkjvjkgbkbib obob;o;o;oib;ibibioi ioiohp'o'o hioohiohiohiohog;ogio iuguigg;gbi [ 9jh h0jh09h0h0h
Presentation on geotextile testing.pptx
Geosynthetic materials, also called geotextiles, are planar products made from polymers that are used in geotechnical engineering and construction projects. They provide innovative and cost-effective solutions to problems. Common types include geotextiles, geogrids, geomembranes, and geocomposites. Geotextiles are made from synthetic fibers like polypropylene, polyester, and polyethylene through processes like weaving and needle-punching. They serve functions like separation, reinforcement, filtration, drainage, protection, and erosion control in foundations, soils, and other geotechnical applications.
More Related Content
What's hot
Nonwoven
The document discusses nonwoven fabrics. It defines nonwoven fabrics as textile structures produced by bonding or interlocking fibers using mechanical, chemical, thermal, or solvent bonding methods. It describes the two main stages of nonwoven fabric production as fiber preparation and web or batt formation, followed by the bonding process. The document also classifies nonwoven fabrics based on production methods such as wet bonding, dry bonding, spun bonding, and melt blowing. It provides examples of properties and applications of nonwoven fabrics.
Fibre Reinforced Plastic manufacturing methods
Composites manufacturing processes are complex, and involve combinations of the following physical processes:
1) Reinforcement Shaping
2) Resin Infusion
3) Composite Consolidation
Advantages and disadvantages of processing techniques
plastic composite manufacturing
Hand Lay-up
Spray up method
Filament winding
Match die molding
Pultrusion
Resin transfer molding
Reaction injection molding
Hand Lay-Up is well suited for low volume production of product.
This method can be used for both corrosion barrier and the structural portion
Fiber is chopped in a hand-held gun and fed into a spray of catalyzed resin directed at the mold. The deposited materials are left to cure under standard atmospheric conditions.
Composite resins
This document discusses the specifications and properties of dental composite materials according to ADA specification no. 27. It outlines the major and minor constituents of composites including the resin matrix, filler particles, and coupling agents. It also describes the advantages and disadvantages of composites, their mechanical properties, modes of curing, and factors that affect properties such as polymerization shrinkage, thermal expansion, water sorption, and radiopacity.
Unit –iii manufac of adv comp
This document discusses various methods for manufacturing advanced composites. It describes prepregs which are fibers preimpregnated with partially cured resin. It also discusses different manufacturing methods like hand layup, filament winding, and autoclave curing. Hand layup involves manually placing resin-soaked fibers in a mold. Filament winding uses continuous fibers wound around a rotating mandrel to form cylindrical parts. Autoclave curing uses heat and pressure in a large oven to fully cure large or complex composite parts.
Packaging Solutions through Partnership
Singular Packaging Technology offers a lightweight yet structurally strong foam box board called ECT 35 for packaging solutions. Made from FDA approved liquid paper and styrene sheets, ECT 35 is water proof, vapor resistant, insulated, and lighter than traditional corrugated options. It also provides shock protection for shipping. ArmorPack can custom manufacture boxes from this material in any size or design to reduce damage, labor costs, and inventory. Crush tests found the 1/4" thick ECT 35 foam box board withstood over 965 pounds of force, outperforming both single-wall and double-wall corrugated boxes. Singular is committed to sustainable packaging solutions and partnerships to reduce environmental impact.
Fabric Testing and quality control
This document discusses fabric testing and quality control in the textile industry. It outlines various fabric tests including thickness, thread density, weight, air permeability, stiffness, abrasion, pilling, water absorbency, repellency, and tensile strength. The objectives of testing are research, material selection, process and product control, and development, while quality control aims to manufacture quality products that meet customer demands at minimum cost and reduce wastage. Standard testing methods for each property are also provided.
Pm testing plastics
The document discusses various tests conducted on plastics used for packaging materials. It describes the three broad groups of tests - physical properties, physico-chemical properties, and optical properties. Several specific tests are outlined, including their significance, apparatus used, standards, and units of measurement. Key tests mentioned are haze, tensile strength and elongation, dart impact, heat seal strength, environmental stress crack resistance, and extractability.
M144 Ch03 Spec
The document discusses specialty polymeric products, focusing on polymeric fibers and films. It provides details on:
- The manufacture and types of polymeric fibers, including characterization methods. Fibers include rayon, acetate, olefinics, acrylics, and polyamides.
- The processes for forming monofilaments and fabrics from fibers, including wet spinning, dry spinning, and melt spinning.
- The various types and applications of polymeric films, including food packaging, mechanical packaging, and other uses. Film materials include cellulose, LDPE, HDPE, PP, PVC, and PET.
Thermoplastics : Introduction,classification,Processing & applications
The document discusses advanced manufacturing techniques using plastics and thermoplastics. It begins by describing some limitations of conventional materials and how plastics offer benefits like ease of manufacturing and versatility. It then classifies plastics into thermoplastics, thermosets and elastomers. The bulk of the document focuses on thermoplastics, describing their properties including glass transition temperature, behavior under temperature conditions, orientation, and water absorption. Examples of commonly used thermoplastics are provided along with applications and potential future developments in the field.
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...Kirubanandan Shanmugam
Synthetic packaging materials are neither reprocessable, renewable nor biodegradable barrier and also difficult to recycle into useful products. While cellulose-based packaging is widely known as a renewable, reprocessable, recyclable and biodegradable material it has limited air and water vapour barrier properties. Nanocellulose (NC) has the potential to become a renewable alternative to plastic packaging barrier layers but its recyclability has not been reported. This investigation is focused on the production of spray-coated nanocellulose (NC) films and its recyclability via dispersion in water and vacuum filtration to form sheets again. Physical properties such as barrier performance and strength of NC films have been evaluated pre- and post- recycling. The recycled films retained 80% of tensile strength and significant barrier performance although the H2O vapour permeability (WVP) approximately doubled, increasing to 9.83 x 10-11 g.m-1.s-1 Pa-1, providing comparable values with for most synthetic packaging. SEM micrographs reveal no fibre agglomeration at the micro level and no damage to the fibres during recycling. The retained strength and barrier properties and facile reprocessability of the spray coated NC film promises a sustainable and recyclable alternative to conventional packaging, providing a sustainable platform for packaging industries.02.multi layer composite films
The document discusses multi-layer composite films and the extrusion process used to produce them. It describes how multiple polymer layers from different extruders can be combined into a single film through a multi-manifold die. The film is then cooled on chill rollers before undergoing slitting, gauging, and winding into rolls. Properties like optical clarity and barrier performance can be optimized through adjustments to materials, temperatures, and processing speeds. Common polymers used include polyolefins like polyethylene and polypropylene.
Textile testing instrument
This document discusses textile testing instruments and their importance. It lists 33 different instruments used for testing various textile properties such as tensile strength, abrasion, color, moisture content, and others. Textile testing is crucial for the textile industry to ensure quality, monitor production, develop new products, and investigate faults. Without testing, quality cannot be guaranteed and profits will be reduced. A variety of instruments are needed to test the diverse range of textile material properties.
Composite manufacturing processes
Hand lay up, pre-preg, pressure molding, vacuum bagging, filament winding, pultusion, spray method, sheet molding, bulk molding and resin transfer molding
Polyester Fibers
This presentation summarizes key information about polyester fiber. It discusses that polyester is a synthetic polymer derived from the reaction of an alcohol and acid. The presentation provides microscopic views and describes the main types of polyester fibers, including polyethylene terephthalate and poly-1,4-cyclohexyline dimethylene terephthalate. It also outlines the manufacturing process of polyester filament and lists the physical and chemical properties of polyester fiber. Some common uses of polyester include clothing, home furnishings, and industrial applications like ropes and tires.
Evaluation of mechanical and water absorption behaviour of coir and rice husk...
The document evaluates the mechanical and water absorption behavior of composites reinforced with coconut coir fiber and rice husk powder. Composites were prepared with untreated and NaOH-treated coir fiber at different weight fractions (5%, 10%, 15%) combined with epoxy resin and rice husk powder. Mechanical tests for impact strength and hardness were conducted according to ASTM standards. Results showed untreated composites had higher impact strength and hardness than treated composites due to better fiber-matrix bonding. However, treated composites absorbed less water than untreated composites due to the hydrophobic nature of chemically-modified fiber. In conclusion, untreated composites performed better mechanically while treated composites were more resistant to water absorption.
Presentation on Industrial Manufacturing Process
This document provides an overview of industrial manufacturing processes and miscellaneous topics related to materials. It discusses the importance of materials in engineering and how different manufacturing methods can contribute to technological and socioeconomic development. Specific topics covered include plastics and composite materials, their properties and types. The document also discusses sources and remedies for contamination in the carpet and textile industry.
1
Polymers are long molecular chains made of repeating monomers. They can be thermosets that permanently harden, or thermoplastics that soften when heated. Composites contain fibers embedded in a polymer matrix to achieve properties neither material has alone. Fiber reinforced plastics are composites with fibers like glass, carbon, or aramid in a plastic matrix. The fibers increase strength and stiffness while the matrix binds them and transfers stress. Composites find applications where high strength and low weight are required.
Composite and bonding
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Composite structure manufacturing
This document discusses out of autoclave composite manufacturing and resin transfer molding (RTM) as alternative processes to traditional autoclave curing. RTM involves placing fiber reinforcement in a closed mold and injecting resin under pressure and heat without an autoclave. The resin cures as it flows through the mold. RTM produces high strength, lightweight composite parts with complex shapes. It is commonly used for aircraft, boat, and wind turbine components. The document provides overviews of RTM and out of autoclave processes, companies that use RTM, benefits, applications, and references for further information.
Slide polymer matrix (2)
The document discusses various methods for processing polymer matrix composites. It describes open molding processes like hand lay-up, spray-up, vacuum bagging, and filament winding which apply resin and fibers to a mold surface. It also covers closed molding processes like compression, injection, and pultrusion molding which use two-piece molds. Key factors in selecting a process include the materials, part geometry, and production quantities. Each method has advantages for different applications like boats, tubs, or structural panels.
What's hot (20)
Thermoplastics : Introduction,classification,Processing & applications
Thermoplastics : Introduction,classification,Processing & applications
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...
Recyclability of Spray Coated Smooth Nanocellulose films as a potential susta...
Evaluation of mechanical and water absorption behaviour of coir and rice husk...
Evaluation of mechanical and water absorption behaviour of coir and rice husk...
Similar to Adhesives
Bonded, Laminated & Bonded fabric (1).pptx
jgvvkjvjkgbkbib obob;o;o;oib;ibibioi ioiohp'o'o hioohiohiohiohog;ogio iuguigg;gbi [ 9jh h0jh09h0h0h
Presentation on geotextile testing.pptx
Geosynthetic materials, also called geotextiles, are planar products made from polymers that are used in geotechnical engineering and construction projects. They provide innovative and cost-effective solutions to problems. Common types include geotextiles, geogrids, geomembranes, and geocomposites. Geotextiles are made from synthetic fibers like polypropylene, polyester, and polyethylene through processes like weaving and needle-punching. They serve functions like separation, reinforcement, filtration, drainage, protection, and erosion control in foundations, soils, and other geotechnical applications.
Laminating
This document provides a review of coating and lamination processes and applications in the textile industry. It discusses various coating methods like direct coating, foamed coating, transfer coating, hot melt extrusion coating, and calender coating. It also discusses coating formulations using polymers like PVC, PU, acrylic and their applications in products like waterproof clothing, tarpaulins, upholstery, and more. Recent developments discussed include phase change materials and conductive coatings. In summary, the document reviews coating and lamination techniques, formulations and applications in textiles as well as recent innovations in the field.
A review on coating & lamination in textiles processes and applications
Coating and lamination are two functional processes which are used make a proper finishing to the textile material. The coating formulation with different textile grade polymer like PVC, PU, acrylic, PTFE are hugely used to make a textile product with multipurpose way like- waterproof protective clothing, tarpaulin, protective clothing, electrical insulation etc. on the other hand lamination process is used to prepare some important textile products with daily uses in our practical life like- blackout curtains and blinds, and c. In this current work is related to details of lamination theory, various processes, formulations, application, recent developments of the coating and lamination in the textile field.
Chemical Bonding
Chemical bonding involves applying a liquid binder to a nonwoven web to improve its characteristics such as strength and durability. Binders work by being applied to the web and then forming strong bonds between the binder and fibers as the moisture or solvent is removed. There are various types of binders classified based on their chemical structure and functionality, including acrylics, styrenated acrylics, and vinyl acetates. Common chemical bonding processes involve saturating, foaming, spraying, printing, or applying binder powders to nonwoven webs. The bonded webs find applications in products like wipes, medical fabrics, and apparel.
Raw Materials for Nonwoven
The document discusses various natural and man-made fiber materials used to produce nonwoven fabrics, including their properties and applications. The main fibers discussed are cotton, polyester, viscose, nylon, polypropylene, and bicomponent fibers. Each fiber has different characteristics making it suitable for specific nonwoven end uses such as apparel, home goods, filtration, and more. Parameters like fiber length, crimp, denier, and finish are also reviewed for their effect on nonwoven production and properties.
Design tensile structures
This document summarizes different types of architectural fabrics and foils used in tension structures. It describes common fiber materials like polyester, polyethylene, fiberglass, and expanded PTFE. It also discusses various coating materials for fabrics, including PVC, fluoropolymers, silicone, and polyurethane. Woven, knitted, and non-woven fabrics are covered. Specific coated fabric types are highlighted, such as PVC-coated polyester and newer THV-coated polyester fabrics.
nonwoven-140324095659-phpapp01.pdf
This document provides an overview of nonwoven fabrics. It defines nonwoven fabrics as sheet or web structures bonded together without weaving or knitting, using mechanical, thermal or chemical processes. Some key points covered include:
- Common uses of nonwoven fabrics in household, industrial, medical and other applications.
- Raw materials used like cotton, rayon, polyester and different fiber properties they provide.
- General production steps for nonwoven manufacturing including bonding techniques like needle punching, hydroentanglement and adhesive bonding.
- Desired properties in bonding agents and different types of binders used.
Nonwoven FABRICS
This document provides an overview of nonwoven fabrics. It defines nonwoven fabrics as sheet or web structures bonded together without weaving or knitting, using mechanical, thermal or chemical processes. Some key points covered include:
- Common uses of nonwoven fabrics in household, industrial, and medical applications.
- Raw materials used like cotton, rayon, polyester and different fiber properties they provide.
- General production steps for nonwoven manufacturing including bonding techniques like needle punching, hydroentanglement, adhesive bonding and thermal bonding.
- Desired properties in bonding agents and different types of binders used.
FS III Ass 1 .pdf
The document discusses various types of finishes used in the textile industry. It describes finishing as the final step that adds functionality and improves surface quality. There are several types of finishes that can be applied to fabrics, including preparatory, stabilizing, textural, and functional finishes. Preparatory finishes prepare fabrics for downstream processing, while stabilizing finishes control the dimensional stability of fabrics. Textural finishes alter the surface appearance and hand of fabrics, and functional finishes provide properties like crease-resistance, waterproofing, or flame retardancy. The document focuses on temporary, semi-durable, and permanent finishes, as well as specific finishes for water-repellency and flame retardancy.
Fabric structures
Fabric structures are constructed from engineered fibers that provide aesthetic, free-form building designs. They are custom-designed to meet structural and weather requirements. The selection of materials, design, engineering, fabrication, and installation all work together to ensure a sound structure. Common fabric materials include polyesters, vinyl-coated polyester, fiberglass, PTFE-coated fiberglass, woven PTFE, and ETFE foil. Properties of these materials like strength, weather-resistance, temperature tolerance, and recyclability determine their suitability for different applications.
IRJET- Experimental Investigation and Behaviour of Epoxy Resin Reinforced wit...
This document summarizes an experimental investigation of the mechanical properties of a composite made from epoxy resin reinforced with woven glass fibers and jute fibers. The composite was fabricated using hand lay-up techniques. Tests were conducted to determine the tensile strength, flexural strength, impact strength, and hardness of the composite according to ASTM standards. The results of the experimental investigation are not discussed in the summary as the focus is on providing a high-level overview of the purpose and methodology described in the document.
EXPERIMENTAL CHARACTRIZATION OF HYBRID COMPOSITE MATERIALS FOR TENSION, FLEXU...
This document describes an experimental study that characterized the mechanical properties of hybrid composite materials made of jute cloth, E-glass fibers, and polyester resin. Specimens were fabricated using hand layup and tested in tension, flexure, and impact. Tensile testing measured Young's modulus, flexural testing measured flexural strength, and Charpy testing measured impact strength. The study found that hybrid composites, which combine natural and synthetic fibers, perform better than composites with a single fiber type due to benefits from both fibers. Characterizing mechanical properties of hybrid composites is important as their use increases in industries like aerospace, military, and automotive.
Nonwoven
This document provides information about nonwoven fabrics, including definitions, history, production processes, characteristics, uses, and the roles of industry associations. It defines nonwoven fabrics as sheet materials made from long fibers bonded together without weaving or knitting. The production of nonwovens began in the 19th century and expanded commercially in the mid-20th century. Key points covered include the main steps of nonwoven production, common fiber materials, properties such as absorbency and strength, and applications in areas like filtration, hygiene, medical, furniture, and automotive. Industry associations that support the development of nonwovens are also mentioned.
Hdpe ppt
High density polyethylene (HDPE) is a thermoplastic polymer produced from ethylene monomer. HDPE geomembranes are made from polyethylene resin, carbon black, and additives. Although HDPE is less flexible than LLDPE, it provides higher strength and can withstand higher temperatures. Common uses of HDPE include waterproof membranes for basements, roofs, tunnels, pools, and pond liners. HDPE has high elongation, puncture resistance, tensile strength, and resistance to chemicals, corrosion, and UV light. Properties are tested through methods like tensile testing, MVTR, and peel adhesion tests.
Evaluation and Sustainability of Natural-Fiber Reinforced Polymer Composites ...
A feasibility study of the usage of natural fiber polymer composites in the automotive industry as a carbon-neutral alternative.
Adhesive
The document discusses various types of adhesives used in the footwear industry including latex, neoprene, polyurethane, hot-melt, and pressure sensitive adhesives. It provides details on several important adhesives for footwear manufacturing such as neoprene adhesive, polyurethane adhesive, and hot melt adhesive. The document also covers adhesive selection criteria and testing methods for adhesives used in footwear production.
2. textile reinforced composites
This document discusses various types of textile reinforcements and composites materials, including woven, knitted, braided and stitched fabrics. It describes the components, classification, manufacturing processes and applications of composites. Specifically, it provides details on woven fabric-reinforced composites, their mechanical properties, and how they are widely used in aerospace applications. It also examines the Boeing 787 aircraft as a case study, outlining the technological and economic benefits of its extensive use of composite materials.
Textile finishing
Textile finishing refers to processes performed on fabrics after dyeing to improve properties like appearance, performance, and feel. There are two main types of finishing: chemical finishing which uses chemicals and water, and mechanical finishing which uses techniques like calendaring without chemicals. Finishing aims to enhance fabric qualities, increase durability, impart new properties like flame resistance, and adapt fabrics for specific end uses. Processes can be classified as temporary or durable, and include techniques like brushing, compacting, resin treatment, and more. Careful consideration of factors like fiber type is needed to develop effective chemical formulations for finishing.
Polyurethane (pu)
Polyurethane is a light weight, flexible and thermally insulating material with low density. It is produced through the reaction of polyisocyanate with polyol, forming urethane linkages. Polyurethane exists as both a thermoset polymer and thermoplastic. It has considerable physical properties like low density, flexibility, chemical stability, and acts as a thermal or electrical insulator. Major applications include use in building insulation, automobiles, marine boats, refrigerators, furniture, footwear, and adhesives.
Similar to Adhesives (20)
A review on coating & lamination in textiles processes and applications
A review on coating & lamination in textiles processes and applications
IRJET- Experimental Investigation and Behaviour of Epoxy Resin Reinforced wit...
IRJET- Experimental Investigation and Behaviour of Epoxy Resin Reinforced wit...
EXPERIMENTAL CHARACTRIZATION OF HYBRID COMPOSITE MATERIALS FOR TENSION, FLEXU...
EXPERIMENTAL CHARACTRIZATION OF HYBRID COMPOSITE MATERIALS FOR TENSION, FLEXU...
Evaluation and Sustainability of Natural-Fiber Reinforced Polymer Composites ...
Evaluation and Sustainability of Natural-Fiber Reinforced Polymer Composites ...
Recently uploaded
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Recently uploaded (20)
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Adhesives
- 1. Garima Goel textile engineering J.N Government Engineering college
- 2. The non woven fabric properties depends on the following particulars to an great extent, 1) The choice of fibers. 2) Technology which determines how the fibers are to be arranged. 3) The bonding process and the bonding agents. Fabric properties of nonwovens range from crisp to that soft-to-the-touch to harsh, impossible-to- tear to extremely weak. This leads to a wide range of end products such as filters, teabags, geotextiles, etc. some which are durable and others Are disposable
- 3. It is not necessary to use best fiber but required fiber Virtually all types of fibrous material can be used to make nonwoven bonded fabric, the choice being dependent on: 1) The required profile of the fabric. 2) The cost / use ratio(cost effectiveness) 3) The demands of the further processing
- 6. The bonding agents are the glue as it binds the web firmly together to give the non woven fabric. These agents largely determine the wear properties of the non woven fabrics. Fabrics made from a combination of fibers and bonding agents is defined ass non woven bonded fabrics ( DIN61210- German Standards Committee)
- 7. Strength/stretch (resistance to pilling, tearing and ripping) Elastic tenacity and bendability Handle and draping qualities Washing and dry cleaning fastness Resistance to chemicals Resistance to air and oxygen Flame resistance property Hydrophilic and hydrophobic properties
- 8. Bonding Fibers are usually made from thermoplastic polymers. The most important of the former kind are polyvinyl alcohol (PVA), co-polyamide, polyolefin, polyester and polyvinylchloride. Among the powders and pastes made from them, those used are co- polyamides, polyethylene and ethylene vinyl acetate (EVA) copolymers.
- 9. The construction of a nonwoven with suitable binders is to achieve improved characteristics such as strength, softness, adhesion, firmness, durability, stiffness, fire retardence, hydrophilicity, hydrophobicity, anti-microbial properties, organic compatibility, reduced surface tension, improved dimensional stability and solvent, wash and acid resistance Strength Adhesion to Fibers Flexibility/handle Elastic Recovery Minimum film forming temperature Glass or brittle temperature Resistance to washing/ Drying cleaning Other special requirements
- 10. A binder is any material or substance that holds or draws other materials together to form a cohesive whole mechanically, chemically, or as an adhesive.
- 11. The binders available are mainly classified according to their chemical structures. There are three main kinds of binders viz. Butadiene copolymers Acrylates Vinyl copolymers