This document summarizes a study of a unique terrestrial occurrence of magmatic hibonite and grossite assemblages found in ejecta from Cretaceous pyroclastic deposits on Mount Carmel, Israel. The assemblages formed from calcium-aluminum rich silicate melts under extremely reducing conditions comparable to meteoritic counterparts. Textural evidence indicates hibonite first crystallized late after corundum and other phases, followed by grossite and spinel. Native vanadium spheres are included within hibonite, grossite and spinel, representing the most reduced conditions. Ongoing studies suggest the reducing conditions reflect interaction between basaltic magmas and mantle-derived methane-hydrogen fluids, resulting in
The document discusses smectites, which are 2:1 phyllosilicate clay minerals. Key points:
- Smectites have an octahedral sheet between two tetrahedral sheets and can expand greatly by absorbing water between interlayer spaces.
- They form in weathering environments and their abundance and distribution affects the formation of décollement zones in subduction zones.
- Smectite to illite transformation may be linked to seismicity as it strengthens sediments.
1) Shefa Yamim Ltd. found over 1,000 pieces of the rare mineral moissanite during drilling exploration on Mount Carmel, Israel.
2) Moissanite crystals ranged in size from 0.1mm to 2.2mm and were found associated with kimberlite indicator minerals. Analysis showed the moissanite to have typical hexagonal crystal structure and composition.
3) The presence of moissanite indicates extreme underground conditions suitable for diamond formation. Moissanite distribution in the area suggests a pattern of findings from south to north in sediments and magmatic bodies on Mount Carmel.
The document discusses crustal architecture and how it relates to mineral wealth and ore deposits. It describes how the oceanic crust is typically less than 10km thick and divided into layers, including an upper sedimentary layer and lower basaltic layers. Continental crust is thicker at around 35-40km and has a more complex architecture reflecting a long tectonic history. Most exploitable ore deposits are found in the upper parts of the continental crust in rocks like granite, diorite, and sediments. The composition of magmas influences the types and concentrations of metals they carry, with more fractionated felsic magmas associated with lithophile elements and certain ore deposits.
Dolomite is a carbonate mineral composed of calcium magnesium carbonate. It commonly forms through the replacement of calcite with magnesium ions in sedimentary rocks over geological time. Dolomite exhibits different crystal structures and fabrics depending on its stoichiometry and ordering of calcium and magnesium ions. It forms through various dolomitization processes involving magnesium-rich fluids interacting with carbonate sediments. Dolomite has economic importance as an oil and gas reservoir rock and is used in construction, steel production, and other industrial applications.
Clay swelling in oil and gas drilling poses challenges and can lead to wellbore instability. There are three mechanisms of clay swelling: intercrystalline, hydration of exchangeable cations, and osmotic. Characterization techniques include XRD, SANS, ICP-MS, FTIR, and TGA. Effective inhibitors use organic polymers or surfactants that interact favorably with clays to reduce swelling while maintaining drilling fluid properties.
This document provides an introduction to ore microscopy. It defines ores and discusses sample preparation techniques and properties that can be observed through microscopic analysis, including:
- Classification of ore deposits as primary, secondary, syngenetic, or epigenetic
- Properties of ore minerals like color, reflectance, hardness, cleavage, and twinning
- Techniques like polishing, etching, and use of an ore microscope
- Advanced techniques like electron microprobe analysis, Raman spectroscopy, and stable isotope studies
The document aims to outline the key aspects of microscopic ore analysis.
This document provides an overview of dolomite petrography and geochemistry. It describes various dolomite rock textures including stoichiometric and non-stoichiometric dolomite, zoned dolomite, fabric-retentive and destructive dolomite, and more. Diagrams show examples of these textures. The document also discusses dolomite geochemistry including trace elements, stable isotopes, and radiogenic isotopes. Graphs illustrate isotopic trends in dolomite over geologic time. In summary, the document categorizes and describes different dolomite rock textures and geochemical signatures.
The document discusses the dolomite problem - why there is so little modern dolomite formation compared to extensive ancient dolomite. It outlines factors that limit modern dolomite precipitation from seawater including mineral kinetics, crystallization rates, hydration, carbonate activity, and sulfate concentration. Overcoming these constraints through processes like evaporation, dilution, or microbial sulfate reduction could have allowed for more dolomite formation in the past. Extensive ancient dolomite requires a source of magnesium, fluid flow to transport magnesium, and suitable physicochemical conditions for dolomitization over long time periods using seawater as the magnesium source.
The document discusses smectites, which are 2:1 phyllosilicate clay minerals. Key points:
- Smectites have an octahedral sheet between two tetrahedral sheets and can expand greatly by absorbing water between interlayer spaces.
- They form in weathering environments and their abundance and distribution affects the formation of décollement zones in subduction zones.
- Smectite to illite transformation may be linked to seismicity as it strengthens sediments.
1) Shefa Yamim Ltd. found over 1,000 pieces of the rare mineral moissanite during drilling exploration on Mount Carmel, Israel.
2) Moissanite crystals ranged in size from 0.1mm to 2.2mm and were found associated with kimberlite indicator minerals. Analysis showed the moissanite to have typical hexagonal crystal structure and composition.
3) The presence of moissanite indicates extreme underground conditions suitable for diamond formation. Moissanite distribution in the area suggests a pattern of findings from south to north in sediments and magmatic bodies on Mount Carmel.
The document discusses crustal architecture and how it relates to mineral wealth and ore deposits. It describes how the oceanic crust is typically less than 10km thick and divided into layers, including an upper sedimentary layer and lower basaltic layers. Continental crust is thicker at around 35-40km and has a more complex architecture reflecting a long tectonic history. Most exploitable ore deposits are found in the upper parts of the continental crust in rocks like granite, diorite, and sediments. The composition of magmas influences the types and concentrations of metals they carry, with more fractionated felsic magmas associated with lithophile elements and certain ore deposits.
Dolomite is a carbonate mineral composed of calcium magnesium carbonate. It commonly forms through the replacement of calcite with magnesium ions in sedimentary rocks over geological time. Dolomite exhibits different crystal structures and fabrics depending on its stoichiometry and ordering of calcium and magnesium ions. It forms through various dolomitization processes involving magnesium-rich fluids interacting with carbonate sediments. Dolomite has economic importance as an oil and gas reservoir rock and is used in construction, steel production, and other industrial applications.
Clay swelling in oil and gas drilling poses challenges and can lead to wellbore instability. There are three mechanisms of clay swelling: intercrystalline, hydration of exchangeable cations, and osmotic. Characterization techniques include XRD, SANS, ICP-MS, FTIR, and TGA. Effective inhibitors use organic polymers or surfactants that interact favorably with clays to reduce swelling while maintaining drilling fluid properties.
This document provides an introduction to ore microscopy. It defines ores and discusses sample preparation techniques and properties that can be observed through microscopic analysis, including:
- Classification of ore deposits as primary, secondary, syngenetic, or epigenetic
- Properties of ore minerals like color, reflectance, hardness, cleavage, and twinning
- Techniques like polishing, etching, and use of an ore microscope
- Advanced techniques like electron microprobe analysis, Raman spectroscopy, and stable isotope studies
The document aims to outline the key aspects of microscopic ore analysis.
This document provides an overview of dolomite petrography and geochemistry. It describes various dolomite rock textures including stoichiometric and non-stoichiometric dolomite, zoned dolomite, fabric-retentive and destructive dolomite, and more. Diagrams show examples of these textures. The document also discusses dolomite geochemistry including trace elements, stable isotopes, and radiogenic isotopes. Graphs illustrate isotopic trends in dolomite over geologic time. In summary, the document categorizes and describes different dolomite rock textures and geochemical signatures.
The document discusses the dolomite problem - why there is so little modern dolomite formation compared to extensive ancient dolomite. It outlines factors that limit modern dolomite precipitation from seawater including mineral kinetics, crystallization rates, hydration, carbonate activity, and sulfate concentration. Overcoming these constraints through processes like evaporation, dilution, or microbial sulfate reduction could have allowed for more dolomite formation in the past. Extensive ancient dolomite requires a source of magnesium, fluid flow to transport magnesium, and suitable physicochemical conditions for dolomitization over long time periods using seawater as the magnesium source.
Classification of sedimentary rock- Allochthonous sediments.pdfAasishGiri
The document discusses the classification of sedimentary rocks. It defines allochthonous sediments as terrigenous and pyroclastic sediments that have been transported to the depositional environment, while autochthonous sediments form in situ. Allochthonous sediments can be classified based on grain size, mineral composition, and degree of maturity. Mudrocks and sandstones are discussed in more detail, including their composition, diagenetic changes over burial, and nomenclature based on textural and chemical maturity.
1. The document discusses ore textures and paragenetic sequences, beginning with definitions and requirements for studying ore textures.
2. It describes various ore textures including single grain textures, magmatic ore textures, open space filling textures, and replacement textures.
3. The document concludes with a discussion on developing paragenetic sequences by analyzing features like cross-cutting relationships and exsolution textures.
PETROGENESIS OF GRANITOID ROCKS AND ORIGIN OF URANIUM MINERALIZATIONS OF UM S...Dr. Ibr@him
- The granitoid rocks of Um Safi area were divided into three magmatic cycles based on field relationships, petrography, and geochemistry.
- The older granitoids (Cycle 1) have calc-alkaline, metaluminous characteristics and were emplaced during a pre-plate collision to post-collision uplift regime.
- The younger biotite granites and perthite sub-leucogranites (Cycle 2) have calc-alkaline, metaluminous compositions and were emplaced during a late-orogenic regime.
- The youngest muscovite sub-leucogranites (Cycle 3) are peraluminous and
Texture of Ore Minerals; Importance of Studying Textures; Individual Grains Properties; Filling of voids; Texture Types; Genetically differentiated between Texture types; Secondary textures from replacement; Hypogene Texture; Supergene Texture; Primary texture formed from Melts; Primary texture of open-space deposition; Secondary textures from cooling; Secondary textures from deformation; TEXTURES OF ECONOMIC ORE DEPOSITS; Textures of Magmatic ores; Cumulus textures; Intergranular or intercumulus textures; Exsolution textures; Textures of hydrothermal ore deposits and skarns; Replacement textures; Open space filling textures; Textures characteristic of surfacial or near surface environments and processes; Criteria for identifying replacement textures; Vein and Veining have different Nature Features
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
This document provides an overview of the classification of igneous rocks. It discusses several key criteria used for classification, including texture, mode of occurrence (intrusive vs extrusive), and chemical composition based on silica and alumina content. Texture types include phaneritic, aphanitic, porphyritic, glassy, and pyroclastic. Mode of occurrence divides rocks into plutonic (intrusive) and volcanic (extrusive) types. Chemical classification schemes analyze silica content to categorize rocks as felsic, intermediate, or mafic, and also consider silica and alumina saturation states. Diagrams are provided illustrating these classification approaches. Examples of different rock types are also briefly described,
WHAT IS VERMICULITE?; TYPICAL vermiculite PROPERTIES; GRADES OF VERMICULITE; VERMICULITE EXPANSION; Processing Vermiculite; Vermiculite Expansion; Production and Reserves of Vermiculite; Vermiculite occurrences in Gabal Hafafit area, Eastern Desert, Egypt; Uses of Vermiculite
Granite is a widely occurring type of intrusive igneous rock that forms from the cooling of magma underground. It is composed mainly of quartz and feldspar minerals. Granite occurs globally and makes up a major part of continental crust. It forms large plutons and batholiths associated with mountain ranges. Granite has been used in construction for thousands of years in landmarks like the Egyptian pyramids and Hindu temples in India. Modern uses include gravestones, monuments, and building stone due to its hardness and durability.
Sedimentary ores form through sedimentation processes. Sediments are weathered from primary rocks by physical and chemical breakdown, then transported and deposited by agents like wind and water in sedimentary basins. Through diagenesis and cementation, sediments consolidate into sedimentary rocks. These rocks form through mechanical, chemical, or biogenic processes. Economically important sedimentation processes include coalification, biogeneous shale formation, residual concentration, and mechanical concentration in placer deposits. Coal forms over millions of years as plant remains are buried and undergo heat and pressure to form carbon-rich rock.
1) Ore deposits can form from the crystallization of magma in magma chambers (magmatic segregation deposits). Some major examples include deposits associated with layered igneous intrusions like the Bushveld Complex in South Africa, the Great Dyke of Zimbabwe, and the Sudbury Igneous Complex in Canada.
2) Skarn deposits form at the contact between intrusive igneous rocks and carbonate country rocks, where the carbonates are metamorphosed into marble, hornfels, and skarn minerals. Skarn deposits are a source for metals like copper, iron, tungsten, lead, and zinc.
3) Porphyry deposits are associated with porphy
1) Carbonate group minerals contain carbon, oxygen, and one or more metallic elements. Calcite and dolomite are common examples.
2) They have a variety of structures but generally have a carbonate ion group (CO3) with a cation situated in the center.
3) Calcite, dolomite, and aragonite are the main carbonate mineral groups. Calcite is the most abundant and has many industrial uses like cement production. Dolomite is also commonly used in construction.
This document reports the discovery of the first natural hydride, vanadium hydride (VH2), found in xenolithic fragments from Cretaceous pyroclastic volcanoes on Mt. Carmel, Israel. Microprobe analysis and single-crystal X-ray diffraction were used to characterize the VH2 crystal. The VH2 has a cubic unit cell structure with the CaF2 structure type and space group Fm3m. Its discovery implies reducing conditions with hydrogen-dominated fluids were present in the upper mantle, with implications for transport of volatile species from the deep mantle to Earth's surface.
This document provides an overview of carbonate rocks such as limestone and dolostone. It discusses their classification including the Folk and Dunham schemes, properties, formation, and common uses. Limestone is composed of calcite and aragonite while dolostone contains dolomite. These rocks form in marine environments and are widely used as building materials. Their solubility also leads to karst topographies and cave formation over thousands of years.
Clays are formed through the weathering of silica-rich rocks like granite. They require reaction time, igneous rocks, geological factors, transportation and weathering agents. There are two types of clays based on origin - residual clays form near the parent rock through chemical weathering, while sedimentary clays form farther away through sedimentary processes. The formation of clay minerals occurs primarily through three mechanisms: inheritance from the parent rock, neoformation through precipitation from solution, and transformation through chemical reactions like ion exchange. The environment of clay formation includes weathering zones, sedimentary environments, and diagenetic-hydrothermal zones.
This document discusses mineral and energy resources. It begins by describing how early humans began using minerals like flint and metals over 20,000 years ago. It then covers the formation of different types of mineral deposits including hydrothermal deposits formed from hot aqueous solutions, magmatic deposits within igneous rocks, and sedimentary deposits from precipitation or weathering. Specific examples of important mineral deposits are provided for different minerals. The document concludes by discussing classifications of useful mineral substances and various energy resources.
The document discusses three main types of ore forming processes: magmatic, sedimentary, and metamorphic. It focuses on magmatic processes, describing early and late magmatic processes like dissemination, segregation, injection, and residual liquid segregation and injection. Immiscible liquid segregation and injection are also discussed. Pegmatite deposits and contact metasomatic deposits near invading magmas are summarized. A variety of ore deposits can form from these magmatic processes depending on temperature and pressure conditions during crystallization and cooling of magma.
THE DISTRIBUTION OF IGNEOUS ROCKS IN SPACE AND TIME
CONSANGUINITY-The term consanguinity (Iddings) is used to indicate the fact that certain groups of igneous rocks, the members of which are associated in space and time, possess a community of character or family likeness which is expressed in their chemical, mineralogical, textural, and geological features. While in chemical composition consanguineous series or suites may range from acid to ultrabasic types, some mineral and chemical characters are constant, i.e. are common to practically all members; while other characters are serial, that is to say, they show regular variation throughout the series. Thus, in some suites, a constant character is oversaturation with silica, which causes free silica to appear in quite basic members. A serial character may be afforded by the regular variation of the alkalis, or of ferrous iron oxide and magnesia throughout the suite. Some series may be characterised throughout by a peculiar mineralogical feature, such as the occurrence of anorthoclase, as in certain Norwegian, East Mrican, and Antarctic suites. Consanguinity in an igneous series leads to the hypothesis that the assemblage has been derived by some process of differentiation from a common initial magma, from a number of closely related magmas.
The document contains descriptions of various rock and sediment samples including evaporites, chert, iron-rich sediments, and phosphorites. For the evaporites samples, the summaries describe the mineralogy, formation process, and depositional environment. The chert summaries outline the relative mineral proportions, textural relationships, and type of chert. The iron-rich sediment summaries note important textural features. Finally, the phosphorite summaries characterize non-isotropic materials and possible host sediments.
This document discusses the importance of studying textures of ore deposits to understand their genesis. It describes various textures including: 1) magmatic ores with cumulus, intergranular, and exsolution textures; 2) hydrothermal ore deposits and skarns with replacement and open space filling textures identified by criteria like pseudomorphs and matching fracture walls; and 3) near-surface deposits with colloform textures like botryoidal aggregates and Liesegang rings formed from colloidal solutions. Understanding these textures provides insight into the formation processes, conditions, and evolution of different ore deposit types.
The document summarizes information about banded iron formations (BIFs) and ironstones. It discusses the characteristics, classification, occurrences, and origins of BIFs from the Precambrian and ironstones from the Phanerozoic. BIFs formed in various depositional environments, including shallow marine shelves and island arc settings, and have sedimentary, volcanic, and biogenic origins. Ironstones include bog ores, oolitic ores, and others that formed in continental and marine environments through weathering and precipitation processes. Examples of BIFs and ironstones in Egypt are also described.
This document summarizes the key characteristics of porphyry copper-molybdenum ore deposits. Porphyry deposits form large, low-grade deposits associated with felsic to intermediate porphyritic intrusions. They are commonly found in orogenic belts and areas of thickened crust. Ore minerals like chalcopyrite and molybdenite occur throughout the host rock in stockworks and disseminations. Grades typically range from 0.2-1% copper. Porphyry deposits form due to boiling of copper-rich magmatic fluids from a cooling intrusion, which then mix with meteoric water to deposit sulfide minerals in stockworks.
Classification of sedimentary rock- Allochthonous sediments.pdfAasishGiri
The document discusses the classification of sedimentary rocks. It defines allochthonous sediments as terrigenous and pyroclastic sediments that have been transported to the depositional environment, while autochthonous sediments form in situ. Allochthonous sediments can be classified based on grain size, mineral composition, and degree of maturity. Mudrocks and sandstones are discussed in more detail, including their composition, diagenetic changes over burial, and nomenclature based on textural and chemical maturity.
1. The document discusses ore textures and paragenetic sequences, beginning with definitions and requirements for studying ore textures.
2. It describes various ore textures including single grain textures, magmatic ore textures, open space filling textures, and replacement textures.
3. The document concludes with a discussion on developing paragenetic sequences by analyzing features like cross-cutting relationships and exsolution textures.
PETROGENESIS OF GRANITOID ROCKS AND ORIGIN OF URANIUM MINERALIZATIONS OF UM S...Dr. Ibr@him
- The granitoid rocks of Um Safi area were divided into three magmatic cycles based on field relationships, petrography, and geochemistry.
- The older granitoids (Cycle 1) have calc-alkaline, metaluminous characteristics and were emplaced during a pre-plate collision to post-collision uplift regime.
- The younger biotite granites and perthite sub-leucogranites (Cycle 2) have calc-alkaline, metaluminous compositions and were emplaced during a late-orogenic regime.
- The youngest muscovite sub-leucogranites (Cycle 3) are peraluminous and
Texture of Ore Minerals; Importance of Studying Textures; Individual Grains Properties; Filling of voids; Texture Types; Genetically differentiated between Texture types; Secondary textures from replacement; Hypogene Texture; Supergene Texture; Primary texture formed from Melts; Primary texture of open-space deposition; Secondary textures from cooling; Secondary textures from deformation; TEXTURES OF ECONOMIC ORE DEPOSITS; Textures of Magmatic ores; Cumulus textures; Intergranular or intercumulus textures; Exsolution textures; Textures of hydrothermal ore deposits and skarns; Replacement textures; Open space filling textures; Textures characteristic of surfacial or near surface environments and processes; Criteria for identifying replacement textures; Vein and Veining have different Nature Features
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
This document provides an overview of the classification of igneous rocks. It discusses several key criteria used for classification, including texture, mode of occurrence (intrusive vs extrusive), and chemical composition based on silica and alumina content. Texture types include phaneritic, aphanitic, porphyritic, glassy, and pyroclastic. Mode of occurrence divides rocks into plutonic (intrusive) and volcanic (extrusive) types. Chemical classification schemes analyze silica content to categorize rocks as felsic, intermediate, or mafic, and also consider silica and alumina saturation states. Diagrams are provided illustrating these classification approaches. Examples of different rock types are also briefly described,
WHAT IS VERMICULITE?; TYPICAL vermiculite PROPERTIES; GRADES OF VERMICULITE; VERMICULITE EXPANSION; Processing Vermiculite; Vermiculite Expansion; Production and Reserves of Vermiculite; Vermiculite occurrences in Gabal Hafafit area, Eastern Desert, Egypt; Uses of Vermiculite
Granite is a widely occurring type of intrusive igneous rock that forms from the cooling of magma underground. It is composed mainly of quartz and feldspar minerals. Granite occurs globally and makes up a major part of continental crust. It forms large plutons and batholiths associated with mountain ranges. Granite has been used in construction for thousands of years in landmarks like the Egyptian pyramids and Hindu temples in India. Modern uses include gravestones, monuments, and building stone due to its hardness and durability.
Sedimentary ores form through sedimentation processes. Sediments are weathered from primary rocks by physical and chemical breakdown, then transported and deposited by agents like wind and water in sedimentary basins. Through diagenesis and cementation, sediments consolidate into sedimentary rocks. These rocks form through mechanical, chemical, or biogenic processes. Economically important sedimentation processes include coalification, biogeneous shale formation, residual concentration, and mechanical concentration in placer deposits. Coal forms over millions of years as plant remains are buried and undergo heat and pressure to form carbon-rich rock.
1) Ore deposits can form from the crystallization of magma in magma chambers (magmatic segregation deposits). Some major examples include deposits associated with layered igneous intrusions like the Bushveld Complex in South Africa, the Great Dyke of Zimbabwe, and the Sudbury Igneous Complex in Canada.
2) Skarn deposits form at the contact between intrusive igneous rocks and carbonate country rocks, where the carbonates are metamorphosed into marble, hornfels, and skarn minerals. Skarn deposits are a source for metals like copper, iron, tungsten, lead, and zinc.
3) Porphyry deposits are associated with porphy
1) Carbonate group minerals contain carbon, oxygen, and one or more metallic elements. Calcite and dolomite are common examples.
2) They have a variety of structures but generally have a carbonate ion group (CO3) with a cation situated in the center.
3) Calcite, dolomite, and aragonite are the main carbonate mineral groups. Calcite is the most abundant and has many industrial uses like cement production. Dolomite is also commonly used in construction.
This document reports the discovery of the first natural hydride, vanadium hydride (VH2), found in xenolithic fragments from Cretaceous pyroclastic volcanoes on Mt. Carmel, Israel. Microprobe analysis and single-crystal X-ray diffraction were used to characterize the VH2 crystal. The VH2 has a cubic unit cell structure with the CaF2 structure type and space group Fm3m. Its discovery implies reducing conditions with hydrogen-dominated fluids were present in the upper mantle, with implications for transport of volatile species from the deep mantle to Earth's surface.
This document provides an overview of carbonate rocks such as limestone and dolostone. It discusses their classification including the Folk and Dunham schemes, properties, formation, and common uses. Limestone is composed of calcite and aragonite while dolostone contains dolomite. These rocks form in marine environments and are widely used as building materials. Their solubility also leads to karst topographies and cave formation over thousands of years.
Clays are formed through the weathering of silica-rich rocks like granite. They require reaction time, igneous rocks, geological factors, transportation and weathering agents. There are two types of clays based on origin - residual clays form near the parent rock through chemical weathering, while sedimentary clays form farther away through sedimentary processes. The formation of clay minerals occurs primarily through three mechanisms: inheritance from the parent rock, neoformation through precipitation from solution, and transformation through chemical reactions like ion exchange. The environment of clay formation includes weathering zones, sedimentary environments, and diagenetic-hydrothermal zones.
This document discusses mineral and energy resources. It begins by describing how early humans began using minerals like flint and metals over 20,000 years ago. It then covers the formation of different types of mineral deposits including hydrothermal deposits formed from hot aqueous solutions, magmatic deposits within igneous rocks, and sedimentary deposits from precipitation or weathering. Specific examples of important mineral deposits are provided for different minerals. The document concludes by discussing classifications of useful mineral substances and various energy resources.
The document discusses three main types of ore forming processes: magmatic, sedimentary, and metamorphic. It focuses on magmatic processes, describing early and late magmatic processes like dissemination, segregation, injection, and residual liquid segregation and injection. Immiscible liquid segregation and injection are also discussed. Pegmatite deposits and contact metasomatic deposits near invading magmas are summarized. A variety of ore deposits can form from these magmatic processes depending on temperature and pressure conditions during crystallization and cooling of magma.
THE DISTRIBUTION OF IGNEOUS ROCKS IN SPACE AND TIME
CONSANGUINITY-The term consanguinity (Iddings) is used to indicate the fact that certain groups of igneous rocks, the members of which are associated in space and time, possess a community of character or family likeness which is expressed in their chemical, mineralogical, textural, and geological features. While in chemical composition consanguineous series or suites may range from acid to ultrabasic types, some mineral and chemical characters are constant, i.e. are common to practically all members; while other characters are serial, that is to say, they show regular variation throughout the series. Thus, in some suites, a constant character is oversaturation with silica, which causes free silica to appear in quite basic members. A serial character may be afforded by the regular variation of the alkalis, or of ferrous iron oxide and magnesia throughout the suite. Some series may be characterised throughout by a peculiar mineralogical feature, such as the occurrence of anorthoclase, as in certain Norwegian, East Mrican, and Antarctic suites. Consanguinity in an igneous series leads to the hypothesis that the assemblage has been derived by some process of differentiation from a common initial magma, from a number of closely related magmas.
The document contains descriptions of various rock and sediment samples including evaporites, chert, iron-rich sediments, and phosphorites. For the evaporites samples, the summaries describe the mineralogy, formation process, and depositional environment. The chert summaries outline the relative mineral proportions, textural relationships, and type of chert. The iron-rich sediment summaries note important textural features. Finally, the phosphorite summaries characterize non-isotropic materials and possible host sediments.
This document discusses the importance of studying textures of ore deposits to understand their genesis. It describes various textures including: 1) magmatic ores with cumulus, intergranular, and exsolution textures; 2) hydrothermal ore deposits and skarns with replacement and open space filling textures identified by criteria like pseudomorphs and matching fracture walls; and 3) near-surface deposits with colloform textures like botryoidal aggregates and Liesegang rings formed from colloidal solutions. Understanding these textures provides insight into the formation processes, conditions, and evolution of different ore deposit types.
Similar to A terrestrial magmatic hibonite grossite-vanadium assemblage desilication and extreme reduction in a volcanic plumbing system mount carmel israel
The document summarizes information about banded iron formations (BIFs) and ironstones. It discusses the characteristics, classification, occurrences, and origins of BIFs from the Precambrian and ironstones from the Phanerozoic. BIFs formed in various depositional environments, including shallow marine shelves and island arc settings, and have sedimentary, volcanic, and biogenic origins. Ironstones include bog ores, oolitic ores, and others that formed in continental and marine environments through weathering and precipitation processes. Examples of BIFs and ironstones in Egypt are also described.
This document summarizes the key characteristics of porphyry copper-molybdenum ore deposits. Porphyry deposits form large, low-grade deposits associated with felsic to intermediate porphyritic intrusions. They are commonly found in orogenic belts and areas of thickened crust. Ore minerals like chalcopyrite and molybdenite occur throughout the host rock in stockworks and disseminations. Grades typically range from 0.2-1% copper. Porphyry deposits form due to boiling of copper-rich magmatic fluids from a cooling intrusion, which then mix with meteoric water to deposit sulfide minerals in stockworks.
Komattite
Named after the Komati River in South Africa.
first described by Morris and Richard (twins) for ultramafic units in the Barberton Greenstone belt of South Africa.
Mostly of komatiite are Archean age
distributed in the Archaean shield areas.
Also a few are Proterozoic and Phanerozoic.
In all ages komatiites are highly magnesium.
Mostly a volcanic rock; occasionally intrusive.
Mafic rocks were identified as extrusive because of their volcanic textures and structures, and they seem to have been accepted as a normal component of Archean volcanic successions, Abitibi in Canada.
The ultramafic rocks were interpreted as intrusive which are founded as sills and dykes, Barberton in South Africa.
Spinifex texture-typical of Komatiites:
The name Spinifex refer to a spiky grass in Australian.
Komattite
Named after the Komati River in South Africa.
first described by Morris and Richard (twins) for ultramafic units in the Barberton Greenstone belt of South Africa.
Mostly of komatiite are Archean age
distributed in the Archaean shield areas.
Also a few are Proterozoic and Phanerozoic.
In all ages komatiites are highly magnesium.
Mostly a volcanic rock; occasionally intrusive.
Mafic rocks were identified as extrusive because of their volcanic textures and structures, and they seem to have been accepted as a normal component of Archean volcanic successions, Abitibi in Canada.
The ultramafic rocks were interpreted as intrusive which are founded as sills and dykes, Barberton in South Africa.
Spinifex texture-typical of Komatiites:
World-class unconformity-related uranium deposits in the Athabasca Basin of Canada formed due to the combined effects of uranium extraction from source rocks, efficient transport by oxidized, saline brines, and exceptional trapping conditions. Uranium was extracted from basement rocks like granites, metasediments, and monazite, as well as from the sandstone cover via alteration of minerals like monazite and zircon. Oxidized, sodium-calcium-rich brines transported uranium at concentrations up to 30 ppm, aided by the redox and pH conditions. Uranium was deposited where a strong redox gradient existed between oxidized sediments and organic-rich basement rocks
The document discusses ore formation systems and processes. It describes how ores were originally thought to form mainly from the cooling and crystallization of magmatic bodies. It then explains that four main ore formation processes are recognized: 1) orthomagmatic processes related to magma evolution and crystallization, 2) hydrothermal processes involving mineralization from magmatic fluids, 3) sedimentary processes concentrating metals through weathering, erosion and sedimentation, and 4) metamorphic processes transforming existing ore deposits. The document provides details on each of these processes and how they concentrate metals to form economic mineral deposits.
This document provides information on igneous rocks, including their classification, textures, and mineralogy. It discusses:
1. The classification of igneous rocks based on texture (phaneritic, aphanitic, porphyritic, etc.) and composition (felsic, mafic, ultramafic).
2. The main igneous minerals like quartz, feldspars, olivines, and pyroxenes.
3. How mineral assemblages in igneous rocks are determined by melt composition and cooling rate. Texture is influenced by the rate of nucleation and crystal growth.
4. Different types of igneous textures including glassy, vesicular
This document describes different textural classifications of igneous rocks based on grain size and composition. It discusses phaneritic rocks, which have visible crystals; aphanitic rocks with crystals too small to see; and porphyritic rocks with two grain sizes. Fragmental rocks are composed of volcanic material. Pegmatitic and glassy textures form from slow and fast cooling respectively. Vesicular textures have gas bubbles. The document also classifies igneous rocks based on their chemical composition and provides diagrams to classify common rock types.
This document defines and describes volcanogenic massive sulphide (VMS) deposits. Key points:
- VMS deposits form from metal-rich hydrothermal fluids emitted from submarine volcanism. They typically occur as lenses of massive sulphides between volcanic and sedimentary rocks.
- Major deposits are found worldwide in volcanic terranes from 3.4 billion years ago to modern seafloor. Canada has over 350 deposits, providing 27-49% of its historical base metal production.
- Deposits range in size but the largest contain over 100 million tonnes of ore. Giant deposits include Neves Corvo in Portugal with over 270 million tonnes of ore containing 8.5 million tonnes of
This document summarizes previous geochemical modeling studies of Carlin-type gold deposits and presents new reaction path modeling conducted by the author. Key findings of the new modeling include: 1) Wall-rock reaction with host limestone, involving iron sulphidation, best explains gold deposition; 2) Neither cooling nor fluid mixing appear to be significant depositional processes on their own; 3) Most rocks containing some iron could potentially host ore-grade gold if sufficient porosity existed during mineralization. The author proposes testing a model where a transient upwards pulse of hot hydrothermal fluid interacts with laterally flowing cooler meteoric fluid to explain deposit characteristics.
The document summarizes a study of oolitic ironstones from the Upper Cretaceous Bad Heart Formation in northwest Alberta, Canada. Samples were analyzed using various mineralogical techniques to characterize the mineralogy and chemistry. The ooids were found to contain layers of goethite and nontronite, with vanadium concentrations up to 0.8% V2O5. Other minerals identified included pyrite, galena, sphalerite, and arsenopyrite. The results provide insights into the depositional environment and economic potential of the iron deposit.
Porphyry copper deposits form from magmatic-hydrothermal activity associated with porphyritic intrusions. They contain low to moderate grades of copper, molybdenum, gold and other metals within stockwork vein systems and disseminated in the intrusion. Distinct hydrothermal alteration zones form around the intrusion, including potassic, phyllic, argillic and propylitic assemblages. Porphyry deposits provide the majority of the world's copper and molybdenum and are important sources for other metals like gold. They form due to crystallization and interaction of fertile magmas with hydrothermal fluids.
1) Immobile element analysis was used to identify volcanic rock types at the Kristineberg VMS deposit in Sweden, despite extensive alteration and metamorphism. This helped correlate units between drill holes.
2) A chemostratigraphic sequence was determined, with rhyolite A south of lens B and rhyolite X north of lens A, separated by andesitic to rhyodacitic rocks hosting the lenses.
3) Calculated alterations show strong asymmetric envelopes up to 50m from lenses, with additions of Mg, Fe, and Si losses.
This document summarizes sedimentary ore deposits, specifically banded iron formations (BIF). It discusses the processes that form different types of BIF, including Algoma and Superior types, as well as their geologic time distribution. The document also explains the role of microbial communities in the deposition of iron minerals and formation of BIF layers through anoxic iron redox cycling, including phototrophic Fe(II) oxidation and nitrate-dependent Fe(II) oxidation mediated by bacteria. Overall, the document provides an overview of the genesis and microbial influences on the formation of important economic BIF deposits in sedimentary environments.
Nesosilicates or orthosilicates, have the orthosilicate ion, which constitute isolated (insular) [SiO4]4- tetrahedra that are connected only by interstitial cations. The atomic packing of the nesosilicate structure is generally dense which causes the mineral of this group to have relatively high specific gravity and hardness. The crystal habit of thee mineral is generally equidimensional and they have poor cleavage. The simplest structure in nesosilicates have mineral forsterite Mg2[SiO4]. These properties also that nesosilicates incorporate a considerable number of gemstones.
Copper mineralization occurs primarily in three deposit types - porphyry copper deposits, clastic sediment-hosted deposits, and volcanogenic massive sulfide (VMS) deposits. Porphyry deposits provide over 60% of the world's copper due to their large size and economies of scale, though they have relatively low grades around 0.2%. Clastic sediment-hosted deposits, like the Kupferschiefer deposits of Europe, account for 25% of world copper production despite being thin layers less than 30m thick due to their great lateral continuity over large areas. VMS deposits are well-understood from modern analogues and often occur in ophiolite sequences associated with subduction zones or mid-ocean
This document discusses diagenetic ore deposits that form from fluids expelled during sediment compaction and lithification. It provides examples of deposit types formed this way, including the European Copper Shale and Mississippi Valley Type lead-zinc deposits. The core concept is that sediments contain large volumes of connate/formation waters that are expelled during diagenesis, becoming enriched in metals. When these hot, high-pressure fluids pass through permeability traps in the basinal sediments, they can precipitate ore minerals and form economic deposits. Microbes and geochemical conditions also influence metal mobility and deposition during this process.
Volcanogenic massive sulfide ore deposits, also known as VMS ore deposits, are a type of metal sulfide ore deposit, mainly copper-zinc which are associated with and created by volcanic-associated hydrothermal events in submarine environments
Einaudi 1994 High Sulfidation and Low Sulfidation Porphyry CopperSkarn System...VictorValdivia20
Geology
Similar to A terrestrial magmatic hibonite grossite-vanadium assemblage desilication and extreme reduction in a volcanic plumbing system mount carmel israel (20)
Diamond exploration, mining, financing and driving entrepreneurial behaviour.James AH Campbell
A presentation entitled:
"Diamond exploration, mining, financing and driving entrepreneurial behaviour".
to the Antwerp World Diamond Council and Gordon Institute of Business ('GIBS') global seminar entitled "From Mine to Finger. A deep dive into the world of diamonds". 7 February 2024 at GIBS.
Most of the participants are either entrepreneurs in the diamond downstream space or academics from both institutions.
Corporate Governance for South African Mining Companies (a practitioner's view)James AH Campbell
Corporate Governance for South African Mining Companies (a practitioner's view).
Compliance & Reporting in the Minerals Industry
15th September 2023
University of the Witwatersrand
(MINN7052A)
Attracting Funds to Develop the Diamond Potential of Southern AfricaJames AH Campbell
Attracting Funds to Develop the Diamond Potential of Southern Africa
JAHCampbell
24 Aug 2023
Presentation to the Kimberely International Diamond Conference.
The document argues that forecasts for demand growth in green metals are overhyped and unrealistic. It cites forecasts showing growth rates as high as 42x for lithium over the next 20 years, and claims these forecasts will not come to fruition. It also notes that there has not been enough capital investment or exploration, especially grassroots exploration, to support achieving the forecasted demand levels. The document concludes that the case for overhyped forecasts of green metals demand has been made.
Prospecting for Solutions: Challenges facing the South African Mining IndustryJames AH Campbell
Prospecting for Solutions: Challenges facing the South African Mining Industry
James Campbell
Presentation to Drexel University MBA group in Johannesburg on 11 May 2023.
This technical report summarizes exploration and mining activities on the Tirisano alluvial diamond project in South Africa. The project includes three contiguous prospecting rights totaling approximately 5,000 hectares. Previous exploration included remote sensing, geophysics, drilling and bulk sampling programs. Bulk sampling recovered grades between 20-60 carats per hundred tons from six pits. Diamond recovery was between 1.1 and 2.5 carats per hundred tons. Diamonds were mostly small, with a few stones over 2 carats. Based on drilling and sampling, an inferred resource of 27.5 million tons at 40 carats per hundred tons was estimated, containing about 11 million carats. Further exploration is recommended to expand resources.
This document provides an analysis of Botswana Diamonds plc by First Equity Limited. It values Botswana Diamonds' key projects including Thorny River, KX36, and Ghaghoo based on their resource estimates and development risks. For Thorny River, the analyst estimates a risked valuation of $44.5 million based on an open pit mining plan and exploration upside. For Ghaghoo, the value is lowered to $7.2 million given lapsed sales agreements but potential for redeals. For KX36, the value is $23.5 million due to increased development risk without Ghaghoo restart. Based on these values, the company's enterprise valuation is estimated at
Is there any overlap between Corporate Governance & Public Reporting?James AH Campbell
Is there any overlap between Corporate Governance & Public Reporting?
Presentation to the Geological Society of South Africa.
10th October 2022, Johannesburg.
Prospecting for Solutions: Challenges facing the South African Mining IndustryJames AH Campbell
Prospecting for Solutions: Challenges facing the South African Mining Industry.
Society of Economic Geologists, SA Chapter.
6th October 2022, University of the Witwatersrand.
Corporate Governance for South African Mining Companies (a practitioner's view)James AH Campbell
This document provides an overview of corporate governance for South African mining companies from the perspective of a practitioner in the industry. It discusses key topics such as the King IV Code, directors' duties, ethics, integrated reporting, socially responsible investment, and the importance of having a social license to operate. The document also examines issues specific to junior mining companies and the role of corporate governance indices and custodians in promoting transparency and accountability.
1) The AK6 kimberlite in Botswana was discovered in 1969 but considered low interest until improved exploration technologies allowed reexamination in 1998.
2) Advanced exploration from 2005-2006 involved large diameter drilling, sampling, and diamond recovery to evaluate the deposit. This led to an initial inferred resource of 11.6 million carats from 48.5 million tons at 24 carats per hundred tons.
3) Further work including trenching and more drilling was planned to upgrade the resource to the indicated classification required for a bankable feasibility study and potential future mining.
The Future of Botswana's Diamond Resources
James AH Campbell
Botswana Resources Infrastructure and Energy Forum ('BRIEF')
Gaborone, Botswana
16-17 May 2022
James Campbell, the father of the bride Nosky, gives a speech at her wedding to Douglas. He welcomes Douglas to the family and recalls how Douglas became part of their family during the COVID lockdown. James wishes the couple a life of partnership, love, and shared responsibility. He provides advice such as learning to attack problems together rather than each other, making time for each other, and never letting the sun go down on an argument. James toasts to the couple's future together with blessings from the Irish, Ndebele, and English traditions.
This Competent Persons Report summarizes the exploration work conducted to date on the Bat Shelomo gemstone project located in northern Israel. Drilling and sampling programs between 2009-2021 identified volcanic rock units and sedimentary deposits containing gemstone minerals such as garnet, spinel, and sapphire. A 54.03 carat garnet was recovered from a bulk sample in 2020. Volume block modeling using drilling data estimated a preliminary resource. Further exploration including additional drilling is recommended to fully evaluate the economic potential of the project.
Volcanoes Presentation with material chiefly drawn from the Geological Society of the UK.
Presented to Reddam House Waterfall learners on 14 March 2022
Authoring a personal GPT for your research and practice: How we created the Q...Leonel Morgado
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...Scintica Instrumentation
Targeting Hsp90 and its pathogen Orthologs with Tethered Inhibitors as a Diagnostic and Therapeutic Strategy for cancer and infectious diseases with Dr. Timothy Haystead.
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
ESR spectroscopy in liquid food and beverages.pptxPRIYANKA PATEL
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Travis Hills of MN is Making Clean Water Accessible to All Through High Flux ...Travis Hills MN
By harnessing the power of High Flux Vacuum Membrane Distillation, Travis Hills from MN envisions a future where clean and safe drinking water is accessible to all, regardless of geographical location or economic status.
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...Advanced-Concepts-Team
Presentation in the Science Coffee of the Advanced Concepts Team of the European Space Agency on the 07.06.2024.
Speaker: Diego Blas (IFAE/ICREA)
Title: Gravitational wave detection with orbital motion of Moon and artificial
Abstract:
In this talk I will describe some recent ideas to find gravitational waves from supermassive black holes or of primordial origin by studying their secular effect on the orbital motion of the Moon or satellites that are laser ranged.
The cost of acquiring information by natural selectionCarl Bergstrom
This is a short talk that I gave at the Banff International Research Station workshop on Modeling and Theory in Population Biology. The idea is to try to understand how the burden of natural selection relates to the amount of information that selection puts into the genome.
It's based on the first part of this research paper:
The cost of information acquisition by natural selection
Ryan Seamus McGee, Olivia Kosterlitz, Artem Kaznatcheev, Benjamin Kerr, Carl T. Bergstrom
bioRxiv 2022.07.02.498577; doi: https://doi.org/10.1101/2022.07.02.498577
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...Leonel Morgado
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
Sexuality - Issues, Attitude and Behaviour - Applied Social Psychology - Psyc...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
A terrestrial magmatic hibonite grossite-vanadium assemblage desilication and extreme reduction in a volcanic plumbing system mount carmel israel
1. A terrestrial magmatic hibonite-grossite-vanadium assemblage: Desilication and extreme
reduction in a volcanic plumbing system, Mount Carmel, Israel
William L. Griffin1,
*,
†, Sarah E.M. Gain1
, Jin-Xiang Huang1
, Martin Saunders2
,
Jeremy Shaw2
, Vered Toledo3
, and Suzanne Y. O’Reilly1
1
ARC Centre of Excellence for Core to Crust Fluid Systems (CCFS) and GEMOC, Earth and Planetary Sciences, Macquarie University,
New South Wales 2109, Australia ORCID 0000-0002-0980-2566
2
Centre for Microscopy, Characterisation and Analysis, The University of Western Australia, Western Australia 6009, Australia
3
Shefa Yamim (A.T.M.) Ltd., Netanya 4210602, Israel
Abstract
Hibonite (CaAl12O19) is a constituent of some refractory calcium-aluminum inclusions (CAIs) in
carbonaceous meteorites, commonly accompanied by grossite (CaAl4O7) and spinel. These phases are
usually interpreted as having condensed, or crystallized from silicate melts, early in the evolution of
the solar nebula. Both Ca-Al oxides are commonly found on Earth, but as products of high-temperature
metamorphism of pelitic carbonate rocks. We report here a unique occurrence of magmatic hibonite-
grossite-spinel assemblages, crystallized from Ca-Al-rich silicate melts under conditions [high-tem-
perature, very low oxygen fugacity (fO2)] comparable to those of their meteoritic counterparts. Ejecta
from Cretaceous pyroclastic deposits on Mt Carmel, N. Israel, include aggregates of hopper/skeletal
Ti-rich corundum, which have trapped melts that crystallized at fO2 extending from 7 log units below
the iron-wustite buffer (ΔIW = –7; SiC, Ti2O3, Fe-Ti silicide melts) to ΔIW ≤ –9 (native V, TiC, and
TiN). The assemblage hibonite + grossite + spinel + TiN first crystallized late in the evolution of the
melt pockets; this hibonite contains percentage levels of Zr, Ti, and REE that reflect the concentration
of incompatible elements in the residual melts as corundum continued to crystallize. A still later stage
appears to be represented by coarse-grained (centimeter-size crystals) ejecta that show the crystalliza-
tion sequence: corundum + Liq → (low-REE) hibonite → grossite + spinel ± krotite → Ca4Al6F2O12
+ fluorite. V0
appears as spheroidal droplets, with balls up to millimeter size and spectacular dendritic
intergrowths, included in hibonite, grossite, and spinel. Texturally late V0
averages 12 wt% Al and 2
wt% Mn. Spinels contain 10–16 wt% V in V0
-free samples, and <0.5 wt% V in samples with abundant
V0
. Ongoing paragenetic studies suggest that the fO2 evolution of the Mt Carmel magmatic system
reflects the interaction between OIB-type mafic magmas and mantle-derived CH4+H2 fluids near the
crust-mantle boundary. Temperatures estimated by comparison with 1 atm phase-equilibrium stud-
ies range from ca. 1500 °C down to 1200–1150 °C. When fO2 reached ca. ΔIW = –7, the immiscible
segregation of Fe,Ti-silicide melts and the crystallization of SiC and TiC effectively desilicated the
magma, leading to supersaturation in Al2O3 and the rapid crystallization of corundum, preceding the
development of the hibonite-bearing assemblages. Reports of Ti-rich corundum and SiC from other
areas of explosive volcanism suggest that these phenomena may be more widespread than presently
realized, and the hibonite-grossite assemblage may serve as another indicator to track such activity.
This is the first reported terrestrial occurrence of krotite (CaAl2O4), and of at least two unknown
Zr-Ti oxides.
Keywords: Hibonite, native vanadium, grossite, krotite, super-reduced conditions, mantle methane,
Mt Carmel; Volatile Elements in Differentiated Planetary Interiors
Introduction
Hibonite (CaAl12O19) was described as a new mineral in 1956
(Curien et al. 1956) and is named after Paul Hibon, who found
centimeter-sized black crystals in a placer deposit in Madagascar
in 1953. It is a constituent of some refractory calcium-aluminum
inclusions (CAIs) in carbonaceous chondrites, commonly asso-
ciated with grossite (CaAl4O7) and corundum (Grossman et al.
1988; Beckett et al. 2006). Hibonite also occurs as microscopic
grains in meteorites, and it is one of the oldest minerals in the
solar system.
The type locality of hibonite is the Esiva alluvial deposits, in
Tulear Province, Madagascar. The material was probably derived
from nearby deposits of thorianite-bearing skarns, which are
widespread in the Pan-African (565–515 Ma) granulite belts
of Madagascar and Tanzania (Rakotondrazafy et al. 1996). In
these rocks, early corundum + spinel + scapolite assemblages
American Mineralogist, Volume 104, pages 207–219, 2019
0003-004X/19/0002–207$05.00/DOI: https://doi.org/10.2138/am-2019-6733 207
* E-mail: bill.griffin@mq.edu.au
† Special collection papers can be found online at http://www.minsocam.org/MSA/
AmMin/special-collections.html.
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
2. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE208
American Mineralogist, vol. 104, 2019
are altered to anorthite + calcite + less-calcic scapolite, while
hibonite crystallized at the expense of corundum and spinel.
Hibonite also occurs as tabular crystals up to 3 cm across in
calcitic marbles from the Tashelga-Malzaskaya region in Siberia
(Konovalenko et al. 2012). These metamorphic hibonites are
notably high in Fe3+
, and they coexist with V-rich minerals (gold-
manite, tashelgite, mukhinite). P-T conditions are estimated at
700–800 °C and 3.5 kbar. The crystallization of hibonite implies
a very low silica activity and, in this location, probably high CO2.
The type locality of grossite is the Hatrurim formation (for-
merly known as the “Mottled Zone”), a unique rock complex
exposed mainly in the Judean Desert of Israel, where it was first
described by Gross (1977). The formation was deposited as a
thin marine, bituminous chalk-marl formation of Campanian to
Neogene age. However, at several localities, it is metamorphosed
to the sanidinite and pyroxene-hornfels facies (up to 1000 °C,
very low P), due to spontaneous isochemical combustion of
bituminous compounds. Hibonite and grossite are widespread
in these metamorphosed sediments.
All previously known terrestrial occurrences of hibonite
and grossite are, to our knowledge, metamorphic in origin. In
contrast, the textures of hibonite-bearing CAIs in CV chondrites
are ambiguous; hibonite occurs as a minor phase coexisting with
melilite, or in coarse-grained assemblages that could be meta-
morphic. However, CAIs from CM chondrites are dominated
by assemblages such as hibonite + spinel + perovskite, some
of which contain glass. Textural features are consistent with
crystallization of hibonite fromAl-rich melts (Kurat et al. 1975;
Grossman et al. 1988; Ireland et al. 1991), condensed from the
solar nebula. The predicted sequence of crystallization would be
corundum-hibonite-perovskite, with subsequent reactions lead-
ing to melilite and spinel. The condensation and crystallization
of such melts would require temperatures of ca. 1500–1300 °C
and would have occurred at the very low oxygen fugacity (fO2)
imposed by the hydrogen-dominated composition of the early
solar nebula (Yoneda and Grossman 1995; Grossman et al. 2008).
The apparent absence of magmatic hibonite-grossite
assemblages on Earth thus is understandable. However, we
report here a terrestrial analog to the hibonite-bearing CAIs of
CM chondrites, from the Mt Carmel volcanics of northern Israel.
Our aim is to document these unusual parageneses; define their
relationships to other members of the ultra-reduced Mt Carmel
volcanic system (Griffin et al. 2016, 2018; Xiong et al. 2017);
discuss briefly the mechanisms that can produce similar high-T,
low-fO2 environments on Earth, and indicate its implications for
the behavior of carbon in deep-seated volcanic systems.
Background
Several years of exploration for placer gemstone deposits in the
drainage of the Kishon River, which enters the sea near Haifa in
northernIsrael(Supplemental1
Fig.S1),haveprovidedthisunusual
occurrence of hibonite and grossite. Details of the geologic setting
of pyroclastic host rocks are given in (Griffin et al. 2016).
Aggregates of hopper-formed corundum crystals (“Carmel
Sapphire”) are common in the pyroclastic ejecta of the volca-
noes exposed on Mt Carmel, and in associated alluvial deposits.
Melt pockets trapped within and between the skeletal corundum
crystals contain mineral assemblages including moissanite (SiC),
Fe-Ti-Zr silicides/phosphides, Ti nitrides and borides, and native
V that require high T (≥1450 to ca. 1200 °C) and fO2 from 6 to
9 log units more reducing than the iron-wustite buffer (ΔIW =
–6 to –9).
Paragenetic studies (Griffin et al. 2016, 2018; Xiong et al.
2017; Fig. 1) suggest that the crystallization of corundum and the
low fO2 reflect the interaction of basaltic magmas with mantle-
derived CH4+H2 at high fluid/melt ratios, leading to progressive
reduction and desilication of the magma, and ultimately toAl2O3-
supersaturation, the rapid growth of skeletal/hopper corundum
crystals, and the deposition of abundant amorphous carbon. This
evolution included several stages of liquid-liquid immiscibility,
including the segregation of Fe- andTi-silicide melts from silicate
melts, driven by a progressive decrease in fO2. The latest stage of
this evolution is defined by the appearance of hibonite, grossite,
and spinel, suggesting that silica-deficient melts evolved beneath
some of the volcanic centers.
Methods
The samples, collected and provided by Shefa Yamim, have been mounted
in epoxy disks, polished, and characterized by optical microscopy, backscattered
electron microscopy, and cathodoluminescence imaging in the scanning electron
microscope to identify minerals and to establish parageneses. Mineral compositions
were analyzed by both SEM-EDS and WDS electron microprobe. Trace elements
were analyzed by LA-ICP-MS. Selected samples were examined by TEM using
FIB foils, and TEM-EDS and TEM-XRD were used to obtain chemical analyses
and crystallographic parameters of specific phases. 3D-μCT scans of individual
grains and aggregates were taken to examine structures in three dimensions. Details
of each of these methods are given in the Supplementary1
Data.
Petrography
HIbonite from the primary pyroclastic deposits and in placer samples from the
Kishon and Yoqneam Rivers occurs in two parageneses. Paragenesis A comprises
inclusions in and between skeletal corundum crystals, and paragenesis B the
granular aggregates of hibonite + grossite + spinel.
Paragenesis A: Hibonite in corundum
Hibonite occurs in pockets of trapped melt interstitial to, or included in, corun-
dum crystals within the corundum aggregates (Figs. 2 and 3).The melt pockets in the
corundum aggregates have been described by Griffin et al. (2016, 2018) and Xiong
et al. (2017). The earliest parageneses consist of tistarite (Ti2O3) ± carmeltazite
(ZrTi2Al4O11; Griffin et al. 2019) ± Mg-Al spinel in a matrix of Ca-Mg-Al-Si-O
glass. The earliest trapped melts represent a considerable modification of assumed
primary silicate melts (probably basaltic), including progressive desilication by the
exsolution of immiscible Fe-Ti oxide melts and Fe-Ti-Zr-silicide melts, and the
crystallization of moissanite and khamrabaevite (TiC), at fO2
= ΔIW-6 or less. This
process continued, producing progressively lower fO2
, witnessed especially by the
appearance of Ti2+
-bearing phases (TiB2, TiN, TiC, TiO). The earliest appearance of
hibonite in the melt pockets is in association with carmeltazite, spinel, TiN, Fe-Ti
silicides and TiC in glass, interstitial to corundum crystals (Fig. 2). This hibonite
is locally associated with grossite but appears also to be in textural equilibrium
with corundum. In some pockets, hibonite is intergrown with or crosscut by at least
two unknown Zr-Ti oxides. (Supplemental1
Table S1; Fig. 3). These phases and
others (Supplemental1
Table S1) appear to reflect the continuous concentration of
incompatible elements in the silicate melts (percent levels of Ti, Zr, La, and Ce;
Table 1) as the trapped melt volumes were progressively reduced by the growth
of corundum, in parallel with the decrease in fO2
.
Paragenesis B: Hibonite-grossite aggregates
Roundedtoangulargrainsrangingfrommillimetersupto2.5 cmacrossconsistof
flattened hexagonal prisms (a:c = 7–17) of hibonite in a matrix of grossite and Mg-Al
spinel(Fig.4).Theroughmaterialtypicallyispurplishincolor(Fig.4a),butinpolished,
moretransparentgrainssomehaveayellow-orangecolor.Thehibonitedisplaysorange
cathodoluminescence, while that of grossite is blue to purple. A characteristic feature
is the occurrence of balls and dendrites of native vanadium, included in hibonite and
grossite, and more rarely in spinel.
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
3. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 209
American Mineralogist, vol. 104, 2019
The major paragenesis of these intergrowths is shown in Figures 5 to 7. Hibonite
occurs as tabular crystals up to 1 cm across, in a matrix of granular grossite and spinel
(commonly as euhedral octahedra); fluorite is the last phase to crystallize. Resorbed
remnants of corundum in some hibonite laths (Figs. 5 and 6) indicate that corundum
crystallized before the Ca-Al-oxides and that hibonite crystallized via the peritectic
reactioncorundum(Cor)+liquid/melt(L)→hibonite.Thiswasfollowedbythecotectic
precipitation of grossite, hibonite, and spinel, and finally the assemblage grossite +
spinel + CaAl2O4 (krotite) + fluorite.
Grossite commonly is euhedral against interstitial fluorite. The oxyfluoride phase
Ca4Al6F2O12 (widely synthesized, but not previously reported in nature) appears to
precedefluoriteinthecrystallizationsequenceandtocoexistwithgrossite.Raregrains
of perovskite (CaTiO3) also appear to coexist with grossite (Fig. 5c; Supplemental1
Table S1) or intergrown with fluorite (Fig. 5d).
Most of the hibonite-grossite aggregates show little or no preferred orientation
of the hibonite crystals, but some have radiating structures. In the example shown in
Supplemental1
FigureS2,thehibonite+grossite+spinel+fluoriteassemblageappears
to have grown from a substrate of coarse-grained grossite; the width of the hibonite
tablets increases with distance from the contact, suggesting a quench-related structure.
Smalldrop-likegrainsofnativevanadium(V0
)arecommoninhiboniteandgrossite
(Fig. 5a and 5b), indicating the lowering of fO2
toΔIW ≤ –9, where V0
becomes stable
(Fig. 1). It occurred roughly at the temperature of the peritectic reaction cor + L =
hibonite, although there is no obvious reason for the two reactions to be linked. Native
V also occurs as balls up to 500 μm across, either isolated within hibonite or together
with grossite and fluorite in complex pockets among hibonite grains (Fig. 8a). These
larger balls contain percent levels of Cr and Mn and have exsolved into laths of V0
with higher and lower levels of these two elements (Figs. 8b and 8c; Supplemental1
Table S1). Some of these balls are altered to mixtures of fluorite and carbonates
(Fig. 8d) related to cracks, some of which are filled with an Al-hydroxide, possibly
gibbsite. Larger cracks contain pockets with a geode-like zoned filling of this phase,
including terminated crystals extending into open voids. Since the assemblage V0
+
CaF2 apparently is stable in other situations (Fig. 8a), this alteration is interpreted as
a post-eruption phenomenon.
Insomecases,vanadiuminhibonitedevelopsfromdrop-likeballswithworm-like
protuberances (Fig. 8), into spectacular 3D dendritic growths (Fig. 9; Supplemental1
Fig. S3), growing sub-parallel to the c axis of the hibonite crystals.
Mineral chemistry
Major and minor elements
Hibonite included in corundum (paragenesis A) contains
significant levels of Si, Zr, Ti, Cr, Sr, Mg, and LREE (up to >6%
Ce2O3; Supplemental1
Table S1), but does not contain measur-
able levels of V. TEM imaging shows a hexagonal cell with c =
22.73 Å, compared to 22.29 Å in the type material; the a axis is
4.8 Å, shorter than in the type material (5.6 Å). Calculation of
the structural formula on the basis of 19 O atoms indicates that
essentially all of the Ti is present as Ti3+
. The apparent deficit in
trivalent ions in the formula (Supplemental1
Table S1) probably
Figure 1. (a) Schematic evolution of a mafic magmatic system progressively reduced by interaction with mantle-derived CH4+H2 fluids. Boxes
illustrate the reconstructed sequence of mineral assemblages; the relative variations in major elements through this process are not to scale, but are
intended to emphasize the effects of reduction, crystallization, and the immiscibility of silicide melts. (b) Relative positions of relevant fO2 buffers
at 1500 °C, 1 atm (after Papike et al. 2013). (Color online.)
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
4. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE210
American Mineralogist, vol. 104, 2019
reflects the levels of other REE (see below) that are below the
detection limit of the EMP (ca. 0.1 wt%). In contrast, hibonite in
the granular aggregates (paragenesis B) contains percent levels
of V, and minor levels of Mg, but all other elements are below
detection for the EMP. Calculation of the structural formula
(Supplemental1
Table S1) suggests that V is present as V3+
, or
even partly as V2+
.
Grossite is essentially stoichiometric CaAl4O7 with no minor
elements at the EMP level. The Raman spectrum of the stoi-
chiometric phase CaAl2O4 (Supplemental1
Table S1) identifies
it as the low-pressure form krotite, rather than the high-pressure
form dimitryivanovite. This is consistent with available pressure
constraints (see below) that suggest crystallization at around
1 GPa, while dimitryivanovite is stable above 2 GPa (Mikouchi
et al. 2009). To our knowledge, this is the first natural terrestrial
occurrence of krotite, originally described from a CAI in a CV3
carbonaceous chondrite (Ma et al. 2011).
Spinels occurring in melt pockets with hibonite (paragenesisA)
are essentially pure Mg-Al spinels, with a deficit in Mg and an
Table 1. Trace-element compositions of selected phases
Trace elements (LAM-ICP-MS)
Hibonite A Hibonite B Grossite B Spinel B
mean St.dev. mean St.dev. mean St.dev. mean St.dev.
n = 2 n = 9 n = 7 n = 4
Li 59.1 <1.5 7.46 0.98
Be 10.0 <0.2 <0.3
B 19.2 30.0 16.7 27.9 19.0 29.9 5.83
Na 45 24.0 13.3 90.7 12.0 332 267
Mg 11863 3700 875 542 49 149364 14403
Si 4777 1302 540 1017 676 1135 185
P 3.4 55.1 23.6 31.6 22.4 55.8 14.4
K 104 <5 <5 48.2 63.2
Sc 171 <0.5 0.22 0.37 <0.7
Ti 16777 291 206 58.4 32.1 153 24.3
V 1.8 6002 3358 1804 748 25517 2437
Cr 0.2 13.9 9.30 6.55 5.0 76.5 20.2
Mn 34 207 192 249 139 4361 1402
Fe <20 67.4 23.1 166 49 <30
Co <0.1 <0.1 0.05 0.06 <0.2
Ni 3.5 <0.5 0.24 0.26 <0.5
Cu <0.2 <0.2 0.01 0.02 <0.3
Zn 0.02 <1 0.60 0.75 9.60 2.0
Ga 7.6 0.42 0.4 0.03 0.05 <0.2
Rb <0.5 <0.2 <0.15 <0.2
Sr 9889 76.4 26.9 34.7 10.1 <7
Y 407 3.10 0.6 3.89 0.77 0.06 0.01
Zr 3468 5.21 3.7 0.12 0.24 <0.1
Nb <0.1 0.12 0.1 <0.01 <0.05
Cs <0.1 <0.1 <0.01 <0.1
Ba 153 10.8 3.7 6.18 1.31 1.54 2.1
La 5758 7.73 5.1 0.09 0.11 <0.04
Ce 15222 20.7 16.5 0.24 0.29 <0.05
Pr 1181 3.38 4.7 0.03 0.04 <0.04
Nd 3716 5.80 4.0 0.07 0.20 <0.02
Sm 493 1.45 1.2 0.09 0.08 <0.3
Eu 54 0.22 0.1 0.09 0.03 <0.06
Gd 277 0.69 0.5 0.06 0.09 <0.3
Tb 30.7 0.14 0.2 0.02 0.02 <0.05
Dy 136 0.55 0.3 0.31 0.15 <0.2
Ho 19.9 0.11 0.2 0.05 0.05 <0.03
Er 42 0.13 0.1 0.27 0.08 <0.1
Tm 3.5 0.01 0.02 0.03 0.03 <0.04
Yb 46 0.05 0.08 0.18 0.14 <0.2
Lu 1.5 <0.03 0.02 2.00 <0.04
Hf 227 0.21 0.2 0.01 0.02 <0.2
Ta <0.1 0.17 0.1 <0.01 <0.15
Pb <0.2 <0.12 <0.15 <0.2
Th 2807 10.5 9.5 <.05 <0.04
U 443 2.35 1.2 0.04 0.01 <0.04
Figure 2. Hibonite in corundum. (a) BSE image of hibonite and
associated phases in melt pocket in corundum. (b) Close-upBSE image of
hibonite; note euhedral terminations on corundum crystals, and residual
glass in the outermost thin wedge.
Figure 3. Zr3TiO8 “phase” with irregular borders crosscutting
hibonite in melt pocket in corundum; note presence of spinel. The
Zr3TiO8 phase is heterogeneous on a small scale, as reflected in its
speckled appearance, and breaks up in contact with Ca-Mg-Al-oxide
glass (black), suggesting that both were melts during emplacement of
the Zr3TiO8 phase.
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
5. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 211
American Mineralogist, vol. 104, 2019
Figure 4. Hibonite-grossite aggregates. (a) Large grain of hibonite-grossite aggregate with millimeter-size spheres of native V (V0
). (b)
Transmitted-light photo of the transparent specimen, enclosing black spinel grain and rods of V0
. (c) Phase map of b showing paragenesis of
aggregates. Comparison of b and c shows that each tiny V0
inclusion represents the end of a long rod or dendrite branch. (Color online.)
Figure 5. Hibonite-grossite
aggregateisillustratingcrystallization
sequence. (a–e) Resorbed corundum
in hibonite reflects peritectic reaction
L + Cor → Hib, followed by
grossite + spinel ± krotite; fluorite
and Ca4Al6F2O12 crystallize last. V0
appears to separate from the melt
at temperatures near the peritectic
reaction, as few inclusions of V0
are
found in the corundum. (f)Aggregate
showing late crystallization of the
F-bearing perovskite phase. (g–h)
BSEimageandphasedistributionmap
showing intergrowth of perovskite
and fluorite. Dark gray phase in BSE
image is gibbsite, which replaces
fluorite and leaves geode-like open
cavities. (Color online.)
excess ofAl.This feature is common to spinels in the less-evolved
melt pockets without hibonite (our unpublished data), suggesting
that either Ti or Al substitutes for Mg, but it is not clear from the
analyses how charge balance would be achieved. Spinels in the
hibonite-grossite aggregates (paragenesis B) show a range of
compositions, related to the presence of native V. Spinels in ag-
gregates with no visible V0
contain 9–16 wt% V (4.5–8 at%), and
1.7–8% wt% Mn; with a few exceptions, the contents of V and
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
6. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE212
American Mineralogist, vol. 104, 2019
Mn are positively correlated, while both MgO and Al2O3 show
negative correlations withV2O3 (Supplemental1
Fig. S4). Detailed
studies of the related phase dellagiustaite (ideallyAlV2O4; Cámara
et al. 2018, 2019), show all vanadium is ordered in the octahedral
sites, with Al in the tetrahedral site; A
AlB
(V2+
V3+
)O4 (where A are
tetrahedral sites and B are octahedral sites). It seems likely that
this is also the case in the high-V spinels reported here.
Spinels in aggregates with scattered small beads of V0
contain
2–5 wt% V and 0.3–1.3 wt% Mn. In aggregates with abundant
V0
, the spinels mostly contain <0.5 wt% V and Mn. These less
V-rich spinels have 2.0 Al ions per formula unit, suggesting that
all of the V substitutes for Mg.
The Ca-Al oxyfluoride in the hibonite-grossite-spinel ag-
gregates (Figs. 5 and 6) has the formula Ca4Al6O12F2; it is known
fromexperimentalstudiesontheCaO-Al2O3-Fsystem(Kim2011).
F. Cámara, R. Pagano, A. Pagano, L. Bindi, and F. Nestola have
described this phase in similar material from Sierra de Comechin-
gones, San Luis,Argentina, and have proposed the name calfidine
(IMF proposal number 2018-093; not yet approved).
All EDS analyses of fluorite contain carbon and may fit a
formula CaF2–xCx. The EMP analyses did not include carbon, but
the deficiency in the sums suggests the presence of a missing
component such as carbon.
The perovskite phase has the formula CaTiO3, implying that
the Ti is present as Ti4+
, this is anomalous at the fO2 implied by its
coexistence with V0
. It also contains 1.6 wt% V and 1.3 wt% F.
The only Zr-Ti oxide grain large enough to analyze by EMP
(Fig. 3) contains minor amounts ofAl, Mn, Mg, and Ca; the struc-
turalformulaofthemeananalysis(Supplemental1
TableS1)canbe
simplified as Zr3TiO8, implying thatTi is present asTi4+
. However,
Figure 6. (a) Phase map of aggregate showing randomly
oriented hibonite plates, with narrow resorbed corundum cores, and
hibonite+grossite intergrowths at edges of plates. Grossite (light green)
is euhedral against CaF2 (orange), the last phase to crystallize. Spinels
(blue-green) are euhedral. (b) Element-distribution maps for Ca and
Al. (Color online.)
Figure 7. Parageneses of vanadium “balls.” (a) Vanadium spheroids with spinel, grossite, and fluorite. (b) BSE image of spheroid 1 in a,
showing intergrowth of Mn-rich and Mn-poor V. (c) BSE image and map of V distribution in spheroid 2 in a, showing intergrowth of native V with
V-Mn alloy. (d) V spheroid partially altered to unidentified Ca-V phase(s). (Color online.)
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
7. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 213
American Mineralogist, vol. 104, 2019
the large standard deviations on the mean analysis indicate that
this “phase” is very heterogeneous. Multiple SEM-EDS analyses
that sample smaller volumes (Supplemental1
Table S1) suggest the
presence of several other oxides with variable ratios of (Zr+Ti)/O
in which Ti appears to be present as Ti3+
. These may represent
breakdown products of the Zr3TiO8 phase shown in Figure 3, but
most occur as discrete grains. FurtherTEM studies will be required
to confirm the nature of these phases.
The smallest vanadium spheres are nearly pure V0
, with 0.5–2
wt%Siand1.5–2.5wt%Mn.Astheseareinclusionsareinhibonite
or corundum, the Si is assumed to substitute in the alloy, rather
than being a matrix contamination. Most larger V inclusions have
lower Si, but contain 1–2% Cr and 0.5–3.5% Mn, and may have
Figure 8. High-Al (mean 15 wt%) V balls in a nest of grossite between hibonite laths, with outlines suggesting they were fluid when trapped.
Note euhedral Ca4Al6O12F2 is protruding into fluorite, the last phase to crystallize. The coexistence of Ca4Al6O12F2 with grossite and fluorite constrains
the crystallization of the assemblage to >1150 °C (Kim 2011); see Supplemental1
Figure S5. (Color online.)
Figure 9. 3D-μCT images of dendritic native V in hibonite. (a) A low-resolution image of two dendrite clusters in a hibonite grain. (b)
Magnified view, looking parallel to (0001) face; red to orange = vanadium; green = open cavities. (c) View from starting point, toward crystal face
along c axis. Tendrils radiate off irregular clumps of V0
. Some consist of a series of joined balls that extend toward the crystal surface, then sprout
into 3D dendritic networks with clear breaks and restarts at intermediate crystal planes. The patterns suggest nucleation of V melts on the surface
of growing crystals. (See animated version in Supplemental1
Fig. S3.) (Color online.)
up to ca. 4 wt% Al (V9Al; Supplemental1
Table S1; Fig. 9). The
latest to form are irregular balls with drop-like protruberances that
occur in nests of grossite surrounded by laths of hibonite (Fig. 8).
These are similar in form to the drops that develop into the spec-
tacular dendrites (Figs. 9, Supplemental1
S3). They contain even
higher levels ofAl, with up to 15 wt% and a mean of 12% (V4Al;
Supplemental1
Table S1); single-crystal XRD has confirmed a
cubic structure (L. Bindi, pers. comm., August 2018).
Trace elements
Mean trace-element data for the major phases, from LA-ICP-
MS analysis, are given in Supplemental1
Table S2 and shown
in Figure 10.
a
b
c
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
8. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE214
American Mineralogist, vol. 104, 2019
anomalies seen in the interstitial-hibonite pattern are absent. Ti
contents in the hibonites of paragenesis B range from 70–720
ppm, and are roughly correlated with V contents, which range
from 1100–13 300 ppm. The highest V contents are found in
grains with small inclusions of V0
, although care was taken to
avoid these during analysis. The next most abundant transition
element is Mn (50–580 ppm) and most grains carry low levels
of Fe and/or Cr. Th and U contents are scattered (1–17 ppm and
1.4–4 ppm, respectively), but Th/U ratios show less spread [3.8
± 2.1(1σ)]. Most Na values are around 20 ppm, but K is <0.02
wt% in most grains. B is reported at levels of 20–50 ppm (but
is <2 ppm in one); we cannot be confident of these values, but
note that the Mt Carmel system does contain boride minerals
(TiB2; Griffin et al. 2016).
Grossite in paragenesis B has generally chondritic to sub-
chondritic levels of the REE, and low levels of most other trace
elements (Fig. 10c). The high standard deviations relative to
the absolute values suggest that many of these elements reside
in tiny inclusions of other minerals, or melt, inside the grossite.
Most grains show a pattern with relatively flat HREE and MREE,
and depleted LREE; the patterns and absolute abundances of Y
and the HREE are similar to those of coexisting hibonite (Figs.
10b and 10c). However, some grains do not show the LREE
depletion. Ba is elevated relative to La and Ce, and all grains
show high levels of Sr and Y compared to the MREE, although
the absolute levels are similar to those in hibonite. In contrast
to the hibonite, most grains of grossite show a small positive Eu
anomaly. Ti (30–120 ppm) contents are lower than in hibonite,
but contents of V (850–2750 ppm) and Mn (0–510 ppm) overlap
the ranges seen in hibonite, and Fe levels (mostly 100–250 ppm)
are higher. There is no obvious correlation between Ti and V. In
marked contrast to the hibonites, contents of Th and U in grossite
are typically <0.05 ppm.
Large spinel grains in paragenesis B contain ~2.5% V; Mn
contents range from 3100–6400 ppm, while Cr, Ti, and Zn values
average 77, 150, and 10 ppm, respectively. Ga contents are <0.2
ppm, giving very high Al/Ga ratios. Ca contents are unusually
high for spinels, at 1100–4300 ppm.
A single LA-ICP-MS analysis of a large vanadium sphere in
hibonite gave values of 490 ppm Zn, 21 ppm Cu, and 69 ppm Nb.
Discussion
Conditions of formation
Temperature. The temperatures during the crystallization of
the Mt Carmel super-reduced assemblages can be estimated from
experimental data, which are mainly from 1-atm experiments.
Therefore the estimated temperatures may represent minimum
values in the individual simple systems. The major phases all
lie within the simple and well-studied system CaO-MgO-Al2O3-
SiO2; the coexisting melts consist mainly of these oxides, though
with significant levels of Ti, Zr, and REE.
Hibonite crystallizes from CaO-Al2O3 melts (Fig. 11a) via the
peritectic reaction Crn + Liq → hibonite; different experimental
or theoretical studies place this reaction at 1850–1880 °C; in
more SiO2-rich systems (Fig. 12) the peritectic extends down
to ca. 1475 °C. There is disagreement in the literature as to the
nature of lower-temperature phase transitions on this binary.
Some studies (e.g., Guo et al. 2015; Azof et al. 2017) show both
Hibonite in the corundum aggregates (paragenesis A) is
extremely enriched in the REE (ΣREE = 2.7 wt%) with a mod-
erate enrichment in LREE over HREE. It shows small negative
anomalies in Sr, Eu, and Y, and it shows a positive anomaly in
Yb. Ti reaches 1.7 wt%, Sr 1 wt%, and Zr 0.35 wt%. Th + U are
also enriched (0.3 and 0.04 wt%), while vanadium is very low
(2 ppm). Fe is absent, although minor Mn (34 ppm) is present;
the only other transition element is Ni (3.5 ppm).
Hibonite in the hibonite-grossite aggregates (paragenesis B)
shows LREE enrichment and a mild depletion in HREE relative
to chondrites; Ba is depleted relative to Ce and La. The extended
REE pattern is essentially parallel to that of the mean hibonite in
paragenesis A (Fig. 10b), but lower in most elements by about
two orders of magnitude and shows a relative depletion in Zr.
One grain (982-2c-01) shows an unusual depletion in the lighter
elements (Sr to Ce, Ba) while the other REE levels are similar
to those in the mean hibonite. Most grains show negative Eu
anomalies (Eu/Eu* = 0.2–0.82, mean 0.46, n = 9), but the other
Figure 10. Chondrite-normalized trace-element abundances. (a)
Hibonite in hibonite-grossite aggregates. (b) Mean hibonite in aggregates
vs. mean hibonite included in corundum. (c) Coexisting hibonite-grossite
pairs, linked by color. (Color online.)
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
9. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 215
American Mineralogist, vol. 104, 2019
grossite and krotite melting congruently, producing the binary
eutectics Hbn + Gros + Liq and Gros + Krot + Liq. Others (e.g.,
Mao et al. 2004) show both phases melting incongruently, in
peritectic reactions Hbn → Gros + Liq and Gros → Krot + Liq.
Still, others show singularities in which the peritectic reactions
correspond to the congruent melting points of grossite and krotite,
respectively.The older experimental work is more consistent with
the modeling of Mao et al. (2004; Fig. 12). In the aggregates of
Paragenesis B, there is no obvious reaction relationship between
hibonite and grossite, but the grossite + spinel assemblage does
appear to crystallize after hibonite.
Grossite (Gros) appears at 1750–1780 °C in the binary sys-
tem, and krotite at ca. 1600 °C. In the 1 atm CaO-MgO-Al2O3
system (Fig. 11c), the Hbn + Gros + Liq peritectic descends to
the Gros + Spl + Liq cotectic at ca. 1690 °C. In the 1-atm liqui-
dus diagram two intermediate Ca-Al-Mg oxides appear through
peritectic reactions just above this temperature (Fig. 11b), but
these phases have not been recognized in the Mt Carmel system.
Their apparent absence may be a pressure effect (see below), or
it may reflect the presence of abundant fluorine in the system,
effectively sequestering Ca. Alternatively, they may have been
consumed in peritectic reactions. The presence of krotite as an
interstitial late phase implies that the residual melts evolved
further, toward the peritectic Gros + Liq (±spinel) → krotite
at ca. 1520 °C (Fig. 11b). Krotite + Spn + Liq coexist along a
cotectic leading to more Ca-rich compositions, not seen in our
samples, at ca. 1350 °C.
The presence of fluorine may lower these liquidus tem-
peratures. The fluorite-grossite assemblage precipitates at ca.
1375 °C in the 1-atm CaF2-CaAl2O4 system and the Ca4Al6O12F2
phase crystallizes from ca. 1480 °C to a eutectic with fluorite
at 1375 °C (Supplemental1
Fig. S5; Kim 2011). Ca4Al6O12F2 is
unstable at T <1150 °C, providing a lower limit for the cooling
of the system before eruption terminated the evolution of the
melts. The presence of this phase implies that F1–
had replaced
a significant amount of the O2–
in the melt (Peng et al. 2012).
One spinel has been found coexisting with hibonite in the
melt pockets (Supplemental1
Table S1). Like spinels coexisting
with tistarite and the TAZ phase in the earlier stages of the melt
evolution, it has a large excess of Al2O3 and a deficit in divalent
cations; by comparison with the experimental MgO-Al2O3 system
(e.g., Bhaduri and Bhaduri 1999; Callister 2007) it gives a T close
to 1400 °C, within the range of temperatures derived from spinels
in other melt pockets (1600 to 1200 °C, with a mean of 1400 °C;
our unpublished data). In contrast, the spinels in the hibonite-
grossite aggregates are nearly stoichiometric (Mg,V)Al2O4,
which yields a temperature around 1200 °C.
Pressure. There are no independent constraints on the
pressure of formation for the hibonite-grossite assemblage; it
crystallized at very low pressure in the Solar nebula (Beckett
et al. 2006), at ca. 1–2 km depth in the Hatrurim Formation
(Gross 1977), and at ca. 10–30 km depths in the granulite-facies
occurrences (Rakotondrazafy et al. 1996). Dmisteinbergite, the
metastable high-T hexagonal polymorph of anorthite, occurs as
Figure 11. Phase diagrams constraining temperatures of
crystallization. (a) Two “end-member” versions of the CaO-Al2O3 binary,
showing reactions as eutectics (Guo et al. 2015; black lines) or peritectics
(Jerebtsov and Mikhailov 2001; red lines); red star shows the average
bulk composition of hibonite-grossite aggregates (Supplemental1
Table
S2). (b)Al-corner of CaO-MgO-Al2O3 liquidus diagram (after data from
FactSage); intermediate Ca-Mg-Al oxides (1–4) have not been identified
in this study. (Color online.)
Figure 12. CaO-Al2O3-SiO2 liquidus diagram at 1 atm. pressure
(after Osborn and Muan 1960; Gentile and Foster 1963), showing
compositions of hibonite-grossite-spinel aggregates, and calculated
and analyzed melts; red arrows show the effects of desilication, and
crystallization of hibonite+grossite aggregates. (Color online.)
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
10. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE216
American Mineralogist, vol. 104, 2019
a quench phase in many melt pockets (Xiong et al. 2017). In
experiments, this phase can be produced by rapid cooling of the
melt to ca. 1200 °C (Davis and Tuttle 1952). In the present case,
this reflects the peritectic reaction Crn + Liq → An, which is
constrained experimentally to Pmin > 0.9 GPa and T ca. 1450 °C
(Goldsmith 1980). The parageneses in the hibonite-grossite
aggregates (Figs. 5 and 6) document crystallization across the
peritectic Liq + Crn → hibonite, followed by crystallization along
the hibonite-grossite cotectic to where it joins the cotectic Gros
+ Spl +Liq. Ottonello et al. (2013) modeled the CaO-Al2O3-SiO2
liquidus at pressures to 2 GPa and argued that grossite is not a
liquidus phase at P ≥1 GPa (Fig. 13). The presence of CaAl2O4
as krotite, rather than the higher-P polymorph dmitryivanovite,
also limits P to <2 GPa (Mikouchi et al. 2009). If these con-
straints are accepted, the Mt Carmel corundum-SiC system was
crystallizing at P = ca. 1 GPa (depths of 25–30 km) near the
crust-mantle boundary in the area (Segev and Rybakov 2011),
when the host basalts erupted.
Oxygen fugacity (fO2). Hibonite is stable over a wide range
of oxygen fugacity. The Mt Carmel assemblages described here
require very reducing conditions, consistent with the occurrence
of tistarite (Ti2O3) and SiC as inclusions in corundum. The pres-
ence of a positive Yb anomaly in the hibonite of paragenesis A
is consistent with this low fO2, as Yb2+
will substitute for Ca in
the hibonite more readily than Yb3+
. In the hibonite-grossite ag-
gregates of paragenesis B, the coexistence of native V requires
fO2 <ΔIW-8 (Fig. 1). As noted above, low oxygen fugacity is not
a pre-requisite for the crystallization of the hibonite-grossite-
spinel assemblage. However, it was the progressive lowering
of fO2 during the evolution of the magmatic system that led to
the immiscibility of silicide melts, driving the desilication of the
magma that ultimately allowed the crystallization of the oxide
assemblage hibonite-grossite-spinel (Griffin et al. 2016; Xiong
et al. 2017).
In summary, the crystallization of the hibonite-grossite
assemblage in the Mt Carmel system probably occurred at
depths of 25–30 km, temperatures falling from ca. 1500 °C to ca.
1200 °C prior to the eruption, and fO2 betweenΔIW-6 andΔIW-9.
Melt evolution
For a rough estimate of the composition of the bulk crystalliza-
tion products, element maps of eight hibonite-grossite aggregates
were point-counted to determine the modal abundances of the
analyzed phases, and bulk compositions were calculated. These
proved to show little variation in composition (Table 1); the mean
contains ca. 80 wt%Al2O3, 16 wt% CaO, 2 wt% MgO, and 1 wt%
F, while other components are present at levels of ≤0.5%. This
composition lies close to the hibonite-grossite boundary on the CA
binary (Fig. 11a), and the CAS ternary plot (Fig. 12), but in the
field of corundum in the CMA ternary (Fig. 11b).
The major-element composition of a melt coexisting with the
average hibonite in paragenesis A (24 analyses) was calculated
using the D values of Kennedy et al. (1994), based on 1-atm
experimental studies, and our own values derived from a single
hibonite-glass pair (Fig. 2). There are obvious hurdles in this ap-
proach, in terms of concentration levels and non-ideality of melts,
but the data may be useful on a comparative basis. The value for
DSi
h/m
given by Kennedy et al. (1994) is clearly not applicable to
the Mt Carmel material, as it would predict >100 wt% SiO2 in
the melt. A value for DSi
h/m
derived from our analysis of the glass
coexisting with one hibonite in corundum would predict 28 wt%
SiO2 in the melt coexisting with the mean interstitial hibonite. The
actual analyzed melt contains 38.3 wt% SiO2, while the interstitial
hibonite coexisting with it has higher SiO2 than the mean value.
As expected, the melt predicted using both approaches is very
high inAl2O3 and CaO (Supplemental1
Table S2). MgO contents
predicted by the data of Kennedy et al. (1994) are higher than our
calculated values. The levels of Zr and Ti predicted by both sets
of distribution coefficients are similar. This composition lies near
the corundum-anorthite cotectic on the CaO-Al2O3-SiO2 (CAS)
liquidus phase diagram at 1 atm pressure (Fig. 12), but close to the
corundum-hibonite peritectic at 1 GPa (Fig. 13; Ottonello et al.
2013). Glasses coexisting with hibonite in meteoritic spherules,
interpreted as melts condensed from the solar nebula (Ireland et
al. 1991) are broadly similar in being essentially CMAS melts but
have lower Al and higher Si, Ca, and Mg than those calculated
for the interstitial hibonite.
The calculated major-element composition of the melt
in equilibrium with the mean hibonite composition of
paragenesis B (Supplemental1
Table S2) suggests a further evo-
lution to higher CaO/Al2O3, but lower MgO. SiO2 and TiO2 are
below detection limits in the hibonite, and this may suggest SiO2
contents ≤20 wt% and TiO2 contents ≤0.5 wt% in the melt. This
composition, though poorly constrained, lies within the CAS liq-
uidus field of corundum at 1 atm and at 1 GPa (Figs. 12 and 13).
If the melts calculated for the two parageneses are linked by
the evolution of the trapped melts beyond the corundum-hibonite
peritectic, then evolution is unlikely to have been driven only
Figure 13. Calculated liquidus diagrams of the CaO-Al2O3-SiO2
system at 3 pressures, after Ottonello et al. (2013). Trd/Cr = tridymite/
cristobalite; Qz = quartz; Wo = wollastonite; An = anorthite; Mul =
mullite; Rk = rankinite; Gh = gehlenite; Crn = corundum; Hbn = hibonite;
Gros = grossite, Grs = grossular; Krt = krotite; Lrn = larnite. Note the
shrinkage of the fields of anorthite and gehlenite, and the expansion of
the krotite and hibonite fields, with increasing P, and disappearance of
the liquidus field of grossite above ~1 GPa. (Color online.)
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
11. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 217
American Mineralogist, vol. 104, 2019
Figure 14. Analyzed glasses and calculated melts. (a)Trace-element
spectra of melts calculated using distribution coefficients of Kennedy
et al. (1994; K94), and the analyzed glass coexisting with hibonite in
Paragenesis A. (b) Trace-element spectra of glasses described in text.
(c) Comparison of calculated melts with hibonite-bearing glasses from
Lance and Murchison meteorites (Ireland et al. 1991). (Color online.)
by fractional crystallization of the observed assemblages, which
would increase SiO2 but decrease Al2O3 in the melt. However,
such an evolution would be broadly consistent with the overall
trend is seen in the Mt Carmel system, of continued desilication
of the silicate melts by immiscible separation of silicide melts
and crystallization of SiC, with falling fO2 (Fig. 13).
The Fe-Ti silicide melts that separated from the parental
melts earlier in their evolution contain <0.5 wt% V (our unpub-
lished data), suggesting that V did not partition strongly into the
metallic melts. This is consistent with the generally lithophile
nature of V, and the observation that the partition coefficient
DV
metallic melt/silicate melt
decreases (i.e., V becomes more lithophile)
with increasing Si content in the metallic melt (Tuff et al. 2011).
However, DV
metallic melt/silicate melt
should be higher at low fO2; this may
indicate that most of the separation of silicide melts occurred at
high enough fO2 (ΔIW-6 toΔIW-7) to hinder a stronger uptake of
V, leaving enhanced levels of V in the residual melts.
During the further evolution of the melts, there were few
crystallizing phases that accepted significant levels of V, until the
appearance of the hibonite-related spinels described here.At that
point, fO2 may have been low enough for the stability of both V3+
and V2+
, allowing substitution for Mg and Al in the first spinels,
up to 8 at% (Supplemental1
Table S1). XANES analysis of V in
fassaitic pyroxenes from refractory CAIs has found V2+
/Vtot
ratios
as high as 0.7, consistent with a solar gas (i.e., H-dominated;
Simon et al. 2007). The presence of Ti2+
-bearing phases (e.g.,
TiC) and V0
suggest that the minimum fO2 during the late stages
of the Mt Carmel system was at least this low (Fig. 1), and thus
that H2 may have been the main volatile species present.
Righter et al. (2006; see also Papike et al. 2013) studied the
partitioning of V between silicate melts and Al-spinels over a
wide range of oxygen fugacity and composition. Using their
Equation 2 and the constants they calculated from the low-fO2
experiments, we estimate DV
spinel/silicate melt
to be in the range of
43–45 for the spinels in the hibonite-grossite aggregates. This ap-
proach suggests that the melt coexisting with the high-V spinels
(Supplemental1
Table S1) contained on the order of 1000–1500
ppm V. The concentration of V in the late Ca-Al-Si-O melts thus
represents only a moderate (5×) enrichment relative to a proposed
mafic parental melt (200–300 ppm; Fig. 2). The melt that crystal-
lized the medium-V spinels contained about 400 ppm V, and the
melt with the low-V spinels, which crystallized in the presence
of V0
, contained only about 35 ppm V. This trend partly reflects
the rapid sequestration of V into its own melt phase, which is
clearly immiscible with the silicate melt.
Composition of coexisting melts: Trace elements
The Dhibonite/melt
values for a range of trace-elements published
by Kennedy et al. (1994; K94 below), Ireland et al. (1991; I91
below), and Drake and Boynton (1988; DB88 below) allow
the calculation of the trace-element patterns of the melts that
would have equilibrated with the analyzed hibonites (Fig.
14a; Supplemental1
Table S2). The melts calculated from the
interstitial hibbonites in the corundum aggregates (paragenesis
A) have relatively flat HREE-MREE and mild enrichment in
the LREE. The LREE patterns calculated with I91 have lower
MREE-HREE than those calculated from the K94 data. The
DEu value of K94 is >1 and produces a negative Eu anomaly,
whereas those of I91 and DB88 produce positive Eu anomalies.
The three sets of DYb values all produce a marked positive Yb
anomaly in the melts with the interstitial hibonite of paragenesis
A. The calculated melts have much higher contents of the REE
and other trace elements than melts coexisting with hibonite
in meteoritic glass spherules (Ireland et al. 1991; Fig. 14c).
However, the meteoritic glasses do not show LREE enrichment,
nor any Yb anomaly.
The calculated melts in equilibrium with the hibonite of
a
b
c
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
12. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE218
American Mineralogist, vol. 104, 2019
paragenesis B are, as might be expected, much more depleted in
most trace elements (except Th, U, and Ba), in general rougher
(a function of low count rates) and more spoon-shaped than the
pattern of the paragenesis A melt. The melts calculated from the
hibonite of paragenesis B have REE levels similar to those of
meteoritic glasses, but the patterns are more spoon-shaped than
those of the meteoritic glasses.
LA-ICP-MS analyses of glasses in the melt pockets in the
corundum aggregates define three prominent populations, rang-
ing from a high-Ce, low-Ba type to a lower-Ce, higher-Ba type
(Fig. 14b; Supplemental1
Table S2); all three types have strongly
negative Sr anomalies.While the high-Ce glasses have flat HREE-
MREE and LREE-enrichment, the lower-Ce glasses have a more
concave-upward pattern. The higher-Ce, lower-Ba glasses are
broadly similar to the calculated melt in equilibrium with the in-
terstitial hibonites (paragenesisA). In the pyroclastic ejecta, many
fragments of the corundum aggregates are coated in the low-Ce,
high-Ba glass, which has patterns even more upward-concave
than those of the higher-Ce glasses (Fig. 14b). These glasses are
broadly similar to the calculated melt in equilibrium with the
mean hibonite of paragenesis B, but also show many differences.
For comparison with the partitioning data of Kennedy et al.
(1994), Ireland et al. (1991), and Drake and Boynton (1988), we
have calculated the distribution coefficients between the intersti-
tial hibonites (paragenesis A) and the high-Ce, low-Ba glass, and
between the aggregate hibonites (paragenesis B) and the low-REE,
high-Baglasses(Supplemental1
TableS2).TheDvaluescalculated
from the interstitial hibonite vs. the high-Ce glasses in general
agree within a factor of 2 with those of I91 and DB88. Notable
exceptions are DSr, DV, DZr, and DBa; for the latter two the K94 D
values look more appropriate. The D values proposed here may
be useful in further studies of meteoritic hibonite associations,
especially for elements where no D values are otherwise available.
The D values calculated by pairing the hibonite of paragenesis B
with the high-Ba glass do not provide a good match with any of
the other data sets, suggesting that the high-Ba glass, although
apparently formed late in the magmatic evolution, was not in
equilibrium with the hibonite-grossite-spinel aggregates.
Summary
(1) The assemblage hibonite + grossite + spinel of
paragenesis A crystallized from evolved, FeO-free, highly re-
duced silicate melts trapped within aggregates of hopper/skeletal
corundum, found as ejecta in the late Cretaceous mafic-ultramafic
explosive-pyroclastic volcanic rocks exposed on Mt Carmel, N.
Israel. Coexisting minerals indicate fO2 ≤ ΔIW-6. These highly
reducing conditions are attributed to interaction between mantle-
derived CH4 + H2 fluids and mafic magmas near the base of the
crust (25–30 km).
(2) Coarse-grained aggregates of hibonite + grossite + spinel +
fluorite ± krotite ± perovskite ± Ca4Al6O12F2 (paragenesis B) ap-
pear to represent the further evolution of the silicate melts.Textural
evidence shows that hibonite crystallized via the peritectic reac-
tion Crn + Liq → Hbn, and was succeeded by Hbn + Gros + Spl.
(3) Native vanadium occurs as rounded inclusions in the
hibonite, grossite, and spinel of the coarse aggregates; some
of these inclusions develop into spectacular dendritic clusters
roughly parallel to the c axis of hibonite crystals. The presence
of V0
requires fO2 ≤ ΔIW-9, suggesting a decline in fO2 by ~3 log
units during the crystallization of this assemblage.
(4) Spinels in the hibonite + grossite +spinel aggregates contain
9–15 wt% V; those coexisting with minor V0
contain 3–5 wt% V,
and those coexisting with abundant V0
contain ≤0.5 wt% V. In
high-Vspinels,vanadiumappearstobepresentasbothV2+
andV3+
,
while in lower-Al spinels it may be present as V2+
; these spinels
are essentially stoichiometric (Mg,V)Al2O4, and are consistent
with crystallization temperatures around 1200 °C.
(5) The late crystallization of the previously unreported phase
Ca4Al6O12F2 together with fluorite in the hibonite-grossite-spinel
aggregates (paragenesis B) suggests that crystallization of the
aggregates began at T >1400 °C, cooled to the pseudo-eutectic
Gros + Fl + Ca4Al6O12F2 + Liq at ca. 1375 °C, and remained at
T >1150 °C until crystallization was terminated by the volcanic
eruption.This is consistent with the appearance of dmisteinbergite
as a quench phase in melt pockets in corundum.
Implications
This is the first reported terrestrial example of the crystal-
lization of hibonite and grossite from high-T silicate melts,
the first terrestrial occurrence of krotite, and the first report of
native vanadium melts. The Mt Carmel assemblages described
here are analogous in many ways to those observed in many
calcium-aluminum inclusions (CAI) inclusions in carbonaceous
chondrites. The inferred conditions of crystallization of the Mt
Carmel assemblages are similar to those of the CAIs in terms
of temperature and fO2, but they appear to have formed at higher
pressures, ca. 1 GPa. The analogies suggest that the Mt Carmel
system also formed in the presence of abundant H2 and carbon.
These unusual mineral assemblages thus reflect a magmatic envi-
ronment in which fO2 was reduced to levels that imply coexistence
with fluid phases dominated by hydrogen. Such environments
have not previously been reported on Earth. Their existence
suggests previously unrecognized processes, which may be
widespread in connection with deep-seated magmatism (Griffin
et al. 2018). The observations presented here emphasize the
importance of immiscibility between silicate melts and metallic
melts under conditions of low fO2, and this may be a significant
factor in element fractionation and partial melting in a metal-
saturated mantle. The depth(s) of origin of the CH4-dominated
volatile fluxes identified here remains to be determined, but the
proposed transfer of such volatiles to shallow depths by deep-
seated magmatism implies a deep source and may represent an
underappreciated part of the deep carbon cycle
Acknowledgments
We thank E. Sass and Oded Navon for useful discussions on the geology of
Mt Carmel and the volcanism of Israel in general. The project benefitted greatly
from the skill and dedication of the Shefa Yamim operational staff at Akko and
especially the mineral sorters. Paul Asimov, David Mittlefelhdt, and handling
editor E.B. Watson provided constructive reviews and advice. This study used
instrumentation funded by ARC LIEF and DEST Systemic Infrastructure Grants,
Macquarie University and industry. This is contribution 1209 from theARC Centre
of Excellence for Core to Crust Fluid Systems (www.ccfs.mq.edu.au) and 1256
from the GEMOC Key Centre (www.gemoc.mq.edu.au).
References cited
Apter, D.B. (2014) High pressure indicator minerals from the Rakefet magmatic
complex (RMC), Mt Carmel, Israel. Abstracts Kimberley Diamond Sympo-
sium, Kimberley, South Africa.
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM
13. GRIFFIN ET AL.: TERRESTRIAL HIBONITE-GROSSITE-VANADIUM ASSEMBLAGE 219
American Mineralogist, vol. 104, 2019
Azof, F.I., Kolbeinsen, L., and Safarian, J. (2017) The leachability of calcium
aluminate phases in slags for the extraction of alumina. Proceedings 35th
International ICSOBA conference, Hamburg 2017, p. 243–253.
Beckett, J.R., Connolly, H.C., and Ebel, D.S. (2006) Chemical processes in igneous
Calcium-Aluminum-rich inclusions: A mostly CMAS view of melting and
crystallization. In D.S. Lauretta and H.Y. McSween, Eds., Meteorites and the
Early Solar System II, pp. 389–429. University of Arizona Press.
Bhaduri, S., and Bhaduri, S. (1999) Phase and microstructural evolution of heat
treated nanocrystalline powders inAl2O3-MgO binary system. Nanostructured
Materials, 11(4), 469–476.
Callister, W.D.J. (2007) Materials Science and Engineering: An introduction (7th
ed.). Wiley.
Cámara, F., Pagano, R., Pagano, A., and Bindi, L. (2018) Dellagiustaite. IMA
2017-101. CNMNC Newsletter No. 42, April 2018, page 446; Mineralogical
Magazine, 82, 445–451.
Cámara, F., Bindi, L., Pagano, A., Pagano, R., Gain, S.E.M., and Griffin, W.L.
(2019) Dellagiustaite: a novel natural spinel containing V2+
. Minerals, in press.
Curien, H., Guillemin, C., Orcel, J., and Steinberg, M. (1956) La hibonite, nou-
velle espece minerale. Compte Rendu Academie Scientifique Paris, 242,
2845–2847 (in French).
Davis, G.L., and Tuttle, O.F. (1952) Two new crystalline phases of the anorthite
composition, CaO. Al2O3·2SiO2. American Journal Science, Bowen, 250A,
107–114.
Drake, M.J., and Boynton, W.V. (1988) Partitioning of rare earth elements between
hibonite and melt and implications for nebular condensation of the rare earth
elements. Meteoritics, 23(1), 75–80.
Gentile, A.L., and Foster, W.R. (1963) Calcium hexaluminate and its stability
relations in the system CaO-Al2O3-SiO2. Journal American Ceramics Society,
46, 74–76.
Goldsmith, J.R. (1980) The melting and breakdown reactions of anorthite at high
pressures and temperatures. American Mineralogist, 65, 272–284.
Griffin, W.L., Gain, S.E.M., Huang, J.X., Saunders, M., Toledo, V., Pearson,
N.J., and O’Reilly, S.Y. (2016) First terrestrial occurrence of tistarite (Ti2O3):
Ultra-low oxygen fugacity in the upper mantle beneath Mount Carmel, Israel.
Geology, 44, 815–818.
Griffin, L.W., Huang, J.X., Thomassot, E., Gain, S.E.M., Toledo, V., and O’Reilly,
S.Y. (2018) Super-reducing conditions in ancient and modern volcanic systems:
Sources and behaviour of carbon-rich fluids in the lithospheric mantle. Mineral-
ogy and Petrology, https://doi.org/10.1007/s00710-018-0575-x.
Griffin, W.L., Gain, S.E.M., Bindi, L., Toledo, V., Cámara, F., Saunders, M., and
O’Reilly, S.Y. (2019) Carmeltazite, ZrAl2Ti4O11, a new mineral trapped in co-
rundum from volcanic rocks of Mt Carmel, northern Israel. Minerals, in press.
Gross, S. (1977) The Mineralogy of the Hatrurim Formation Israel. Geological
Survey of Israel, 80 pp.
Grossman, J.N., Rubin, A.E., and MacPherson, G.J. (1988) ALH85085: a unique
volatile-poor carbonaceous chondrite with possible implications for nebular
fractionation processes. Earth and Planetary Science Letters, 91(1), 33–54.
Grossman, L., Beckett, J.R., Fedkin, A.V., Simon, S.B., and Ciesla, F.J. (2008)
Redox conditions in the solar nebula: Observational, experimental, and theo-
retical constraints. Reviews in Mineralogy and Geochemistry, 68, 93–140.
Guo, C., Shang,S.,Du, Z.,Jablonski, P.D.,Gao, M.C., and Liu, Z-K. (2015) Ther-
modynamic modeling of the CaO-CaF2-Al2O3 system aided by first-principles
calculations. CALPHAD, 48, 113–122.
Ireland,T.R., Fahey,A.J., and Zinner, E.K. (1991) Hibonite-bearing microspherules:
Anew type of refractory inclusions with large isotopic anomalies. Geochimica
et Cosmochimica Acta, 55(1), 367–379.
Jerebtsov, D.A., and Mikhailov, G.G. (2001) Phase diagram of CAO-Al2O3 system.
Ceramica International, 27, 25–28.
Kennedy,A.K., Lofgren, G.E., and Wasserburg, G.J. (1994) Trace-element partition
coefficients for perovskite and hibonite in meteorite compositions. Chemical
Geology, 117(1), 379–390.
Kim, D.-G. (2011) Experimental study and thermodynamic modelling of the
CaO-SiO2-Al2O3-CaF2 system. Master thesis, McGill University Libraries.
Konovalenko, S.I., Ananyev, S.A., and Garmayeva, S.S. (2012) Rare and new
minerals of the Tashelga-Maizaskaya zone of Gornaya Shoriya, their pecu-
liarities and nature. Journal of Siberian Federal Univeristy—Engineering and
Technologies, 5, 301–310.
Kurat, G., Hoinkes, G., and Fredriksson, K. (1975) Zoned Ca-Al-rich chondrule
in Bali: New evidence against the primordial condensation model. Earth and
Planetary Science Letters, 26, 140–417.
Ma, C., Kampf, A.R., Connolly, H.C. Jr., Beckett, J.R., Rossman, G.R., Sweeney
Smith, S.A., and Schrader, D.L. (2011) Krotite, CaAl2O4, a new refractory
mineral from the NWA 1934 meteorite. American Mineralogist, 96, 709–715.
https://doi.org/10.2138/am.2011.3693
Mao, H., Selleby, M., and Sundman, B. (2004)Are-evaluation of the liquid phases
in the CaO-Al2O3 and MgO-Al2O3 systems. Computer Coupling of Phase
Diagrams and Thermochemistry, 28, 307–312.
Mikouchi, T., Zolensky, M., Ivanova, M., Tachikawa, O., Komatsu, M., Le, L., and
Gounelle, M. (2009) Dmitryivanovite:Anew high-pressure calcium aluminum
oxide from the Northwest Africa 470 CH3 chondrite characterized using
electron backscatter diffraction analysis.American Mineralogist, 94, 746–750.
Osborn, E.F., and Muan, A. (1964) In E.M. Levin, C.R. Robbins, and H.F. Mc-
Murdie, Eds., Phase Diagrams for Ceramists, vol. 1, 219 pp. The American
Ceramic Society, Columbus, Ohio.
Ottonello, G., Attene, M., Ameglio, D., Belmonte, D., Vetuschi Zuccolini, M.,
and Natali, M. (2013) Thermodynamic investigation of the CaO–Al2O3–SiO2
system at high Pand T through polymer chemistry and convex-hull techniques.
Chemical Geology, 346, 81–92.
Papike, J.J., Burger, P.V., Bell, A.S., Le, L., Shearer, C.K., Sutton, S.R., Jones,
J., and Newville, M. (2013) Developing vanadium valence state oxybarom-
eters (spinel-melt, olivine-melt, spinel-olivine) and V/(Cr+Al) partitioning
(spinel-melt) for martian olivine-phyric basalts. American Mineralogist, 98,
2193–2196.
Peng, K.W., Zhang, P., Xie, J.G., and Ma, H.L. (2012) Study on properties ofAl2O3-
CaO-SiO2-CaF2 slag system.Advanced Materials Research, 396-398, 786–790.
Rakotondrazafy, M.A., Moine, B., and Cuney, M. (1996) Mode of formation
of hibonite (CaAl12O19) within the U-Th skarns from the granulites of S-E
Madagascar. Contributions to Mineralogy and Petrology, 123(2), 190–201.
Righter, K., Sutton, S.R., Newville, M., Le, L., Schwandt, C.S., Uchida, H.,
Lavina, B., and Downs, R.T. (2006) An experimental study of the oxidation
state of vanadium in spinel and basaltic melt with implications for the origin
of planetary basalt. American Mineralogist, 91, 1643–1656.
Segev,A., and Rybakov, M. (2011) History of faulting and magmatism in the Galilee
(Israel) and across the Levant continental margin inferred from potential field
data. Journal of Geodynamics, 51(4), 264–284.
Simon, S.B., Sutton, S.R., and Grossman, L. (2007) Valence of titanium and
vanadium in pyroxene in refractory inclusion interiors and rims. Geochimica
et Cosmochimica Acta, 71(12), 3098–3118.
Tuff, J., Wood, B.J., and Wade, J. (2011) The effect of Si on metal-silicate par-
titioning of siderophile elements and implications for the conditions of core
formation. Geochimica et Cosmochimica Acta, 75, 673–690.
Xiong, Q., Griffin, W.L., Huang, J.X., Gain, S.E.M., Toledo, V., Pearson, N.J.,
and O’Reilly, S.Y. (2017) Super-reduced mineral assemblages in “ophiolitic”
chromitites and peridotites: the view from Mount Carmel. European Journal
of Mineralogy, 29(4), 557–570.
Yoneda, S., and Grossman, L. (1995) Condensation of CaO-MgO-Al2O3-SiO2
liquids from cosmic gases. Geochimica et Cosmochimica Acta, 59(16),
3413–3444.
Manuscript received July 15, 2018
Manuscript accepted October 13, 2018
Manuscript handled by Bruce Watson
Endnote:
1
Deposit item AM-19-26733, Supplemental Material. Deposit items are free to
all readers and found on the MSA web site, via the specific issue’s Table of Con-
tents (go to http://www.minsocam.org/MSA/AmMin/TOC/2019/Feb2019_data/
Feb2019_data.html).
Brought to you by | Macquarie University
Authenticated | bill.griffin@mq.edu.au author's copy
Download Date | 2/4/19 12:40 AM