Describe how a product is developed and what are the stages of development and morphology of Design.
It discusses the various challenges faced while developing and also the evolution of different products which have become the daily need of our life.
Describe how a product is developed and what are the stages of development and morphology of Design.
It discusses the various challenges faced while developing and also the evolution of different products which have become the daily need of our life.
Purpose Statement:
To provide an overview of Design for Manufacturing and Assembly (DFMA) techniques, which are used to minimize product cost through design and process improvements.
The concept generation process begins with a set of customer needs and target specifications and results in a set of product concepts from which the team will make a final selection.
Taguchi Method is a new engineering design optimisation methodology that improves the quality of existing products and processes and simultaneously reduces their costs very rapidly, with minimum engineering resources and development man-hours
Purpose Statement:
To provide an overview of Design for Manufacturing and Assembly (DFMA) techniques, which are used to minimize product cost through design and process improvements.
The concept generation process begins with a set of customer needs and target specifications and results in a set of product concepts from which the team will make a final selection.
Taguchi Method is a new engineering design optimisation methodology that improves the quality of existing products and processes and simultaneously reduces their costs very rapidly, with minimum engineering resources and development man-hours
Hydraulics and Pnuematics Basics and Pumps.pptxsadha sivam
for need of basics in hydraulics and pneumatics in UG students as well as research in fluid society.this becomes highly viewed in industry oriented division
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
1. Product Specifications
Teaching materials to accompany:
Product Design and Development
Chapter 6
Karl T. Ulrich and Steven D. Eppinger
5th Edition, Irwin McGraw-Hill, 2012.
2. Product Design and Development
Karl T. Ulrich and Steven D. Eppinger
5th edition, Irwin McGraw-Hill, 2012.
Chapter Table of Contents:
1.Introduction
2.Development Processes and Organizations
3.Opportunity Identification
4.Product Planning
5.Identifying Customer Needs
6.Product Specifications
7.Concept Generation
8.Concept Selection
9.Concept Testing
10.Product Architecture
11.Industrial Design
12.Design for Environment
13.Design for Manufacturing
14.Prototyping
15.Robust Design
16.Patents and Intellectual Property
17.Product Development Economics
18.Managing Projects
3. Concept Development Process
Perform Economic Analysis
Benchmark Competitive Products
Build and Test Models and Prototypes
Identify
Customer
Needs
Establish
Target
Specifications
Generate
Product
Concepts
Select
Product
Concept(s)
Set
Final
Specifications
Plan
Downstream
Development
Mission
Statement Test
Product
Concept(s)
Development
Plan
Target Specs
Based on customer needs
and benchmarking
Final Specs
Based on selected concept,
feasibility, models, testing,
and trade-offs
4. 06/18/18 4
Outline
• Nature of specifications
• Spec vs. specs.
• Target vs. final specs.
• Process for setting target specs
• Process for setting final specs
5. 06/18/18 5
Spec vs. Specs
• A spec consists of a metric, a unit, and
a value
• Specs has a set of specs.
6. 06/18/18 6
Target vs. Final Specs
• Target specs: the hope and aspiration
of the design (ideal and marginal)
• Refined specs: trade-offs among
different desired characteristics.
– Intermediate specs
• Final specs
– It is in the project’s contract book
7. 06/18/18 7
Nature of Specifications
• The reference point for functionality
design and quality planning
• A product assembly usually requires a
hierarchy of specs, for the final product
and each of its components
8. The Product Specs Process
1. Set Target Specifications
– Based on customer needs and benchmarks
– Develop metrics for each need
– Set ideal and acceptable values
1. Refine Specifications
– Based on selected concept and feasibility testing
– Technical and economic modeling
– Trade-offs are critical
1. Reflect on the Results and the Process
– Critical for ongoing improvement
9. 06/18/18 9
Procedure for establishing
target specifications
1. Identify a list of metrics and measurement
units that sufficiently address the needs
2. Collect the competitive benchmarking
information
3. Set ideal and marginally acceptable target
values for each metric (using at least, at
most, between, exactly, etc.)
4. Reflect on the results and the process
10. 06/18/18 10
Process for setting the final
specifications
1. Develop technical models to assess technical feasibility. The
input is design variable and the output is a measurement using
a metric.
2. Develop a cost model of the product.
3. Refine the specifications, making tradeoffs, where necessary to
form a competitive map.
4. “Flow down” the final overall specs to specs for each
subsystem (component and part).
5. Reflect on the results to see
Whether the product is a winner, and/or
How much uncertainty there is in the technical and cost model, or
Whether there is a need to develop a better technical model.
20. Concept Development Process
Perform Economic Analysis
Benchmark Competitive Products
Build and Test Models and Prototypes
Identify
Customer
Needs
Establish
Target
Specifications
Generate
Product
Concepts
Select
Product
Concept(s)
Set
Final
Specifications
Plan
Downstream
Development
Mission
Statement Test
Product
Concept(s)
Development
Plan
Target Specs
Based on customer needs
and benchmarking
Final Specs
Based on selected concept,
feasibility, models, testing,
and trade-offs
26. Quality Function Deployment
(House of Quality)
technical
correlations
benchmarking
on needs
customer
needs
engineering
metrics
target and final specs
relative
importance
relationships between
customer needs and
engineering metrics
32. 06/18/18 32
Chapter 6 HW
Metric Exercise: Ball Point Pen
Identify five possible metrics and the unit of measure for a customer
need as stated below:
The pen writes smoothly.