3D printing involves using various processes to create 3D objects of any shape by laying down successive layers of liquid, powder, or sheet material according to a digital design file. It was invented in 1983 but has since developed many new features. It is used widely in manufacturing tools for industries like medicine, where it can be used to produce simulated organs, as well as for jewelry, art, architecture, and fashion design. In the future, 4D printing may allow objects to have sound, taste, and other interactive properties.
This presentation gives a basic overview on 3D printing. Introduction 3D printing, History of 3D printing, Various 3D printing technologies, Advantages of 3D printing, Uses of 3D printing are all covered in this presentation.
This presentation gives a basic overview on 3D printing. Introduction 3D printing, History of 3D printing, Various 3D printing technologies, Advantages of 3D printing, Uses of 3D printing are all covered in this presentation.
The use of 3D printing is gradually increasing and the technologies developed in the 3D printing also increases. This presentation is about the various technologies present the market.
Additive manufacturing, commonly referred to as 3d printing, is a manufacturing
technique that rises in the 1980’s mainly focused on engineering prototyping. Current
advances in the precision and cost of the techniques, as well as the widespread use of 3d
designing have increased 3d printing’s scope of use from high-end engineering prototypes
to a large variety of uses in manufacturing. 3d printing improve the processing time,
decrease waste, and increase the level of customization of certain products by eliminating
the need for the specialty tooling and dies that are traditionally used in manufacturing. In
addition, the ability to physically print difficult shapes based on a computer model has
given rise to new products that would otherwise be simply impossible to create. The
various fields have taken advantage of this technology by printing 3d objects.
The presentation contains all the data about 3D printing. How it is done, what are the various ways of 3D printing process along with its Advantage & Disadvantage, type of raw material used, etc....
3D printer Technology _ A complete presentationVijay Patil
Please give a feedback if you like my presentation.
google drive download link :
https://drive.google.com/file/d/1LSLZ-eU8QvihgzJ5BO_sav1im_e0ck0a/view?usp=sharing
representation about 3D printing:
Introduction
What is 3D printing
Why I need 3D printer
How Does 3D Printing Work
3D Printing Materials
Future of 3D Printing
Usage of 3D printing
Conclusion
A brief presentation on 3D Printing technology.
3D printing is the technology to print layout of any design to check the accuracy of the design before implementing the same on a large scale design in order to save time and money. The procedure of the same is quite easy and can be carried out with great efficiency. Almost all designs can be formed using this technique unless it is too complex.
Abstract
Introduction To 3D Printing
History
Types of 3D Scanner
Components Of 3D Printer
Material used for 3D Printing
Working
Software Required For 3D Printing
Advantages Of 3D Printing
Limitations Of 3D Printing
Applications
Future Scope
Conclusion
References
The use of 3D printing is gradually increasing and the technologies developed in the 3D printing also increases. This presentation is about the various technologies present the market.
Additive manufacturing, commonly referred to as 3d printing, is a manufacturing
technique that rises in the 1980’s mainly focused on engineering prototyping. Current
advances in the precision and cost of the techniques, as well as the widespread use of 3d
designing have increased 3d printing’s scope of use from high-end engineering prototypes
to a large variety of uses in manufacturing. 3d printing improve the processing time,
decrease waste, and increase the level of customization of certain products by eliminating
the need for the specialty tooling and dies that are traditionally used in manufacturing. In
addition, the ability to physically print difficult shapes based on a computer model has
given rise to new products that would otherwise be simply impossible to create. The
various fields have taken advantage of this technology by printing 3d objects.
The presentation contains all the data about 3D printing. How it is done, what are the various ways of 3D printing process along with its Advantage & Disadvantage, type of raw material used, etc....
3D printer Technology _ A complete presentationVijay Patil
Please give a feedback if you like my presentation.
google drive download link :
https://drive.google.com/file/d/1LSLZ-eU8QvihgzJ5BO_sav1im_e0ck0a/view?usp=sharing
representation about 3D printing:
Introduction
What is 3D printing
Why I need 3D printer
How Does 3D Printing Work
3D Printing Materials
Future of 3D Printing
Usage of 3D printing
Conclusion
A brief presentation on 3D Printing technology.
3D printing is the technology to print layout of any design to check the accuracy of the design before implementing the same on a large scale design in order to save time and money. The procedure of the same is quite easy and can be carried out with great efficiency. Almost all designs can be formed using this technique unless it is too complex.
Abstract
Introduction To 3D Printing
History
Types of 3D Scanner
Components Of 3D Printer
Material used for 3D Printing
Working
Software Required For 3D Printing
Advantages Of 3D Printing
Limitations Of 3D Printing
Applications
Future Scope
Conclusion
References
Horizontal, voûté ou incliné, un plafond tendu est toujours simple à placer. La pose du plafond tendu, des luminaires et autres accessoires assimilés ne prend que quelques heures. Soigneusement, sans désordre, ni saleté !
Morosini, concepteur d'intérieurs, est le centre pilote et technique des plafonds tendus NEWMAT pour la Belgique (Province de Luxembourg) et le Grand-Duché de Luxembourg.
Notre showroom de 750 mètres carrés à cheval entre Athus (Belgique) et Rodange (Luxembourg) permet aux visiteurs de découvrir toute la gamme des plafonds tendus NEWMAT
Les plafond tendu Biopruf sont des solutions sanitaires antibactériennes.
http://www.webmarkteurs.com
Growth hacking : définition
Le growth hacking n’est pas une nouvelle discipline, mais plutôt une nouvelle façon de voir la croissance des entreprises web. Le propre du growth hacking est de faire intervenir tous les métiers du web ensemble pour maximiser la croissance. Elle s’oppose à une vision traditionnelle ou travaillent séparément le marketing chargé de générer du trafic et les développeurs opérant sur le site, suivant des objectifs différents.
Pour faire simple, le growth hacker n’a qu’un seul objectif : la croissance. Ainsi, peu importe le nombre de visites sur le site si de ces visites ne découlent pas d’inscriptions, de partages et de revenu. Pour mieux comprendre comment travaille le growth hacker, le schéma AARRR de Dave McClure représentant le cycle de vie d’un client est parfait...
The Community Manager Basics Guide is a good starter guide for anyone new to community management. Some of the topics covered include: On-boarding new members, dealing with trolls, choosing moderators and keeping users engaged.
Europe 2014-2020: smart grid (réseaux intelligents)UNITEC
présentations de la Délégation générale Société de l’Information à la délégation d’Aquitains conduite par AEC, 30 janvier 2012:
les réseaux intelligents (smart grid)
Révolutionnaires, les revêtements tendus subliment vos murs !
Pour le neuf ou la rénovation, nous vous proposons une gamme complète de revêtements innovants permettant de réaliser murs imprimés. A la fois décoratifs et fonctionnels, les revêtements muraux se déclinent en version classique, design, acoustique, translucide, antibactérienne, antitache et déperlante. Une solution pour chacun de vos besoins, les toiles murales se plient à toutes les attentes!
Le mobile peut-il être roi sans être ROIste ?
Retrouver la présentation de la Keynote et de la table ronde avec Benoît Lelarge, millennial media, Guillaume Dolbeau, PMU, Pascale Martin, Nestlé, Laurent Battais, Médiamétrie, Alexandre Tan, Gameloft.
Après New-York, Pékin, Londres et Singapour, le MMA Forum s’est installé pour la première fois à Paris le 5 décembre dernier. Cet événement n’aurait pas pu avoir lieu sans la confiance de nos partenaires : Solocal Group, Havas Media / Mobext, SFR Régie, Millennial Media et Sofialys. Le succès du Forum a par ailleurs été assuré par la qualité reconnue des différents intervenants.
The visual language of Hong Kong’s neon signsKeith Tam
A study of the visual language of Hong Kong’s neon signs and its connections to architecture, typography and the context of Hong Kong’s urban environments. Keynote presentation at the Hong Kong Arts Centre on 28 May 2014, organised by M+, Hong Kong’s museum of visual culture.
Full article of the study:
(English) http://goo.gl/vHfYIO
(Traditional Chinese) http://goo.gl/iW4cEf
this teaches about how 3D printing can be used to help other people and fun ways to teach and learn. It also includes how people make 3D printing designs, art shows, and medical uses.
3DPrinting Technologies
echnologiesthatbuild3Dobjectsbyaddinglayer-upon-layerofmaterial,whetherthematerialisplastic,metal,concreteoranycompositematerials. There are three types of Printer.
1.Stereo lithography (SLA)
2.Selective laser sintering (SLS)
3.Fused deposition modeling (FDM)
This slideshow was compiled according to specs provided by my eCommerce professor. We were tasked with picking an area of technology that was of interest. I have always been fascinated by 3D Printing and I feel that it is a technology that will be greatly expanded in the next 10 years.
3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file. The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the entire object is created. Each of these layers can be seen as a thinly sliced horizontal cross-section of the eventual object.
We are proud to announce our twentieth Innovation Excellence Weekly for Slideshare. Inside you'll find ten of the best innovation-related articles from the past week on Innovation Excellence - the world's most popular innovation web site and home to 5,000+ innovation-related articles.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
3. How does 3d printing work?
• 3D printing is any various processes for
making 3-dimensional object in any shape.
• To print it, the machine will reads the design
from the file that you gave to it and lays down
successive layers of liquid, powder or sheet
material to build the model from what you
gave.
4. When was 3D Printing invented?
• It was invented in 1983 by Chuck Hull and they
were very expensive at that time. Many
features are developed after that.
5. How is 3D being used to make tools?
• It is one of the most important applications in
medical industry. We can produce a stimulate
organs for the patients. It makes designer’s life
easier because this can make a part of scratch
in just hours. It is also used for jewelry and art,
architecture, fashion design, etc.
6. What will printing of tools look like in
the future?
• In the future, I think that technology will
become more popular than in nowadays and
the programmer maybe can make a 4d
printing have sound, taste and everything
7. News
• Nowadays, Hollywood starting using 3D
printing in movies, such as LiveScience.
Andrew Clement says that his team has been
using 3D printing to turn actors into
monsters. They said that using 3D Printing is
extremely fast and easy. Even movie like Harry
Potter used 3D Printing!