2007 Electrical Regions
•
0 likes•255 views
This is a 2007 presentation on electrical with Kimball Office product. If you have any questions regarding this presentation please contact alibia.devente@gmail.com.
Report
Share
Report
Share
Recommended
INDUSTRIAL ELECTRONICS,POWER ELECTRONICS,ELEARNING
Power electronics controls electrical energy using electronic circuits and switches semiconductor devices between cutoff, saturation, and active regions. It differs from linear electronics which uses semiconductor devices as amplifiers in the active region. Power electronics has lower switching losses, operates switches rather than amplifiers, and is used in applications that require control of high power levels like motor drives, power supplies, and renewable energy systems. Common examples of power electronics applications include light dimmers, air conditioners, vacuum cleaners, induction cooking, UPS systems, escalators, blowers, elevators, pumps, compressors, and cranes.
Wiring devices
This document discusses different types of electrical wiring devices and consumable items. It identifies conductors, switches, receptacles, contactors, and relays as common wiring devices. Conductors can be bare, covered, or insulated. Switches include single pole switches, three-way switches, four-way switches, timer switches, sensor switches, and dimmer switches. Receptacles include duplex receptacles, straight blade receptacles, and floor box receptacles. The document provides brief descriptions of each type of wiring device and advises on how to properly select wiring devices according to manufacturer, warranty, support, and job requirements.
Softwire 101 for furniture and workstation
A brief overview from The WorkTools Co of softwiring for those in furniture and soft fitout industry. The presentation provides some tips and guidance that you can immediately apply.
All about different types of electronic connectors
Express Technologies is one such reliable electronic distributor and supplier that can provide your exclusive range of quality electronic components like relays, connectors, resistors, and many more in one place.
What are the key benefits of relays
If you are looking for Omron Relays Wholesale Suppliers to buy the finest range of relays then Express Technology is a one-stop solution to accomplish your needs.
Basic things you should know about relays
Are you looking for different types of relays or electronic components parts? If yes, then you can buy it from trusted Omron Relay wholesale suppliers like Express Technologies.
H07 Power Load Survey
The document provides guidance for conducting a load survey of three buildings - a barracks, TOC, and DFAC - that will be used during a mission in Ramadi, Iraq. It lists the existing electrical equipment in each building, including lighting, outlets, appliances, HVAC units, and electronics. Based on this equipment inventory and power requirements, the document determines:
- A 100 kW diesel generator would be sufficient to power all three buildings from a central location.
- Cables will be run from the generator to 200A, 100A, and 60A panel boxes to distribute power within each building.
- The generator and panel boxes will need to be properly sized and located to avoid voltage drop and ensure balanced
Power supply and (sata and pata)
The document discusses power supplies and the differences between IDE and SATA interfaces. It provides details on how power supplies work, converting alternating current to direct current and regulating voltage. While SATA allows higher bandwidths than IDE, a SATA hard drive is not necessarily faster as most drives cannot sustain speeds above IDE's maximum throughput. The key difference is that SATA uses fewer pins and a simpler serial interface compared to the older parallel IDE interface.
Recommended
INDUSTRIAL ELECTRONICS,POWER ELECTRONICS,ELEARNING
Power electronics controls electrical energy using electronic circuits and switches semiconductor devices between cutoff, saturation, and active regions. It differs from linear electronics which uses semiconductor devices as amplifiers in the active region. Power electronics has lower switching losses, operates switches rather than amplifiers, and is used in applications that require control of high power levels like motor drives, power supplies, and renewable energy systems. Common examples of power electronics applications include light dimmers, air conditioners, vacuum cleaners, induction cooking, UPS systems, escalators, blowers, elevators, pumps, compressors, and cranes.
Wiring devices
This document discusses different types of electrical wiring devices and consumable items. It identifies conductors, switches, receptacles, contactors, and relays as common wiring devices. Conductors can be bare, covered, or insulated. Switches include single pole switches, three-way switches, four-way switches, timer switches, sensor switches, and dimmer switches. Receptacles include duplex receptacles, straight blade receptacles, and floor box receptacles. The document provides brief descriptions of each type of wiring device and advises on how to properly select wiring devices according to manufacturer, warranty, support, and job requirements.
Softwire 101 for furniture and workstation
A brief overview from The WorkTools Co of softwiring for those in furniture and soft fitout industry. The presentation provides some tips and guidance that you can immediately apply.
All about different types of electronic connectors
Express Technologies is one such reliable electronic distributor and supplier that can provide your exclusive range of quality electronic components like relays, connectors, resistors, and many more in one place.
What are the key benefits of relays
If you are looking for Omron Relays Wholesale Suppliers to buy the finest range of relays then Express Technology is a one-stop solution to accomplish your needs.
Basic things you should know about relays
Are you looking for different types of relays or electronic components parts? If yes, then you can buy it from trusted Omron Relay wholesale suppliers like Express Technologies.
H07 Power Load Survey
The document provides guidance for conducting a load survey of three buildings - a barracks, TOC, and DFAC - that will be used during a mission in Ramadi, Iraq. It lists the existing electrical equipment in each building, including lighting, outlets, appliances, HVAC units, and electronics. Based on this equipment inventory and power requirements, the document determines:
- A 100 kW diesel generator would be sufficient to power all three buildings from a central location.
- Cables will be run from the generator to 200A, 100A, and 60A panel boxes to distribute power within each building.
- The generator and panel boxes will need to be properly sized and located to avoid voltage drop and ensure balanced
Power supply and (sata and pata)
The document discusses power supplies and the differences between IDE and SATA interfaces. It provides details on how power supplies work, converting alternating current to direct current and regulating voltage. While SATA allows higher bandwidths than IDE, a SATA hard drive is not necessarily faster as most drives cannot sustain speeds above IDE's maximum throughput. The key difference is that SATA uses fewer pins and a simpler serial interface compared to the older parallel IDE interface.
AUTOMATIC STREET LIGHT PRESENTATION
This document describes an automatic street light system that uses an LDR (light dependent resistor) and transistor to automatically turn street lights on at night. The main components are an LDR, transistor, resistor, LED, and battery. The LDR detects low light levels and sends a signal to the transistor to turn on the LED light. This system saves energy by only powering the lights when it is dark. Potential applications include street lighting and domestic lighting to reduce electricity waste.
Applications that uses semiconductors
Express Technologies is one of the Top Electronic Components Distributors
that brings exclusive range of electronic components like transistors, rabbit semiconductor microcontrollers, relays and more in one location.
Electrical Earthing Systems
1) The document discusses the importance of electrical earthing in industries for safety against hazards like electrocutions and fires.
2) It notes that the technology for earthing has changed from the traditional PIT type using charcoal and salt to modern chemical earthing, which is widely used and accepted.
3) The company specializes in chemical earthing electrodes with advantages like increased capacity to withstand stresses and a wide range of options to suit different load and fault capacity requirements.
Purchase your Cable Jointing Kits from Compaq International (P) Limited
Compaq has been in existence since 1997.It is concerned with producing a range of cable accessories that are capable of handling overvoltage, strikes and power surges.
POWER ELECTRONICS BASIC COMPONENTS INTRODUCTION PART 1
Power electronics is a branch of electronics engineering that deals with high voltages and currents. It involves components that can handle voltages in the hundreds or thousands and currents in the hundreds of amps. Power electronics converters include rectifiers to convert AC to DC, inverters to convert DC to AC for solar power, choppers to vary DC voltage, and cycloconverters to change AC frequency. Common power electronic devices are DIACs, TRIACs, SCRs, GTOs, UJTs, PUTs, LASCRs, power diodes, PNPN diodes, BJTs, power MOSFETs, and IGBTs.
RUGGEDCOM RP100 Ethernet injectors
The Siemens Ruggedcom RP100 is a single-port Power-over-Ethernet injector that provides power and data over standard Cat5 cable. It is compatible with both 802.3at and 802.3af PoE standards. The RP100 is designed for reliability in harsh industrial and electrical environments with a wide operating temperature range of -40°C to +85°C. It can be used to power devices for SCADA and other industrial applications.
costing of domestic and industrial wiring
This document discusses various topics related to electrical wiring estimation and costing for domestic and industrial wiring projects. It covers types of wiring, selection of wiring types, importance of layout planning, sub-circuiting, looping, standard wire sizes, testing procedures before commissioning wiring, and provides examples of procedures for estimating wiring costs for domestic and industrial projects. The document is intended to provide an overview and guidance on planning, estimating, and testing electrical wiring installations.
Microcontroller based mho relay for distance protection
You haven't seen this type of ppt
this is by
Mohan K M
Ganesh C
Yerriswamy A
from PESIT Bangalore
Oc ppt
This document discusses semiconductor lasers for optical communication. It was developed in 1962 by Robert Hall and consists of complex multi-layer structures. Semiconductor lasers have advantages like small size, low cost, simple construction and high efficiency. However, they also have disadvantages such as relatively low power production and high sensitivity to temperature. Semiconductor lasers find applications in optical communication using fiber optic cables for high-speed data transmission, as well as in medical treatments and as transmitters of digital data.
Electrical layout of
The document provides specifications for the electrical systems in a radiology room, including:
1) Raceway systems will be installed to route wiring for radiology equipment, with floor, wall, and ceiling troughs.
2) Wiring will include high voltage cables for equipment, and grounding conductors.
3) Installation will require coordinating with equipment layout and shielding, and certifications will be provided upon completion.
1.3 wiring accessories
This document discusses and classifies various electrical wiring accessories. It describes controlling accessories like switches, mounting accessories like holders used to mount fixtures, safety accessories like circuit breakers and fuses, and general accessories like connectors, ceiling roses and plug sockets. These accessories are important components used in home and building wiring systems to control and distribute electricity safely.
Design and analysis of ultra low power vlsi circuit in sub and near threshold...
In this project, the EKV model of MOSFET is used as standard. The power consumption of near-threshold CMOS logic CLA and Fredkin gate structures in the sub-threshold region is calculated for a 22nm MOSFET and a comparative analysis of the power consumption and voltage swing is also presented. The analysis is based on the result of the simulation and the modeling of the respective structures. Also, voltage swings have been calculated on various kinds of inputs. And finally the resulting noise margin is calculated in the aforesaid sub-threshold condition.
Solid-State Power Controllers Advantages over Relays and Breakers
Solid-state power controllers (SSPCs) provide advantages over relays and circuit breakers including being more accurate in measurements, offering faster short circuit and overload protection, and greater reliability as they are not subject to erosion or oxidation issues. SSPCs also save weight and volume, come in multiple mounting styles to work with AC or DC power, and can enhance system availability while lowering power dissipation and providing higher power volumes.
Resume
Satyanarayana Nandigam is an electrical engineer with over 6 years of experience in electrical system design for power generation, transmission, and distribution projects. He has expertise in preparing single line diagrams, specifications, layout drawings, and performing calculations for cable sizing, voltage drop, short circuit analysis, and more. Some of the key projects he has worked on include thermal power plants in Maharashtra, West Bengal, Chhattisgarh, and Andhra Pradesh as well as industrial facilities in Indonesia and India.
Grounding and techniques
Grounding electrical systems properly protects people and equipment from faults, lightning strikes, and static discharge by providing a path to dissipate stray energy safely into the earth. Different grounding methods like single stakes, ground rods, plates, and meshes can be used depending on the site conditions and equipment. Proper testing of soil resistivity and ground resistance is important to select the suitable grounding type and ensure effectiveness of the system.
Relays classificatiion according to technology and design basics
Relays have evolved from electromechanical to static, digital, and now numerical relays. Electromechanical relays used mechanical components controlled by electric current and were the earliest form. Static relays replaced mechanical components with analog electronics. Digital relays then replaced analog components with microprocessors. Numerical relays use digital signal processors for faster processing. Relays can also be classified by function, such as protective, monitoring, reclosing, regulating, and synchronizing relays.
Fiber Optic Communication
This document discusses attenuators, optical fiber connectors, and their types. It begins by defining an attenuator as an electronic device that reduces signal power without distortion. It then describes the main types of attenuators and why optical fiber connectors are required to join fibers where connections are needed. The document classifies and describes common connector types like SC, ST, FC, LC, and MT-RJ. It lists features of good connector design and references additional resources on the topics.
Css q3 week2
This document provides information about terminating and connecting electrical wiring and electronic circuits. It begins with learning objectives for the lesson, which are to plan and prepare wiring/circuits for termination and connection, perform the terminations and connections, and test the terminated and connected wiring/circuits. It then lists objectives for students to select proper tools, prepare wiring/circuits correctly according to instructions, and follow safety procedures. The document continues with explanations of electrical theory, including direct current, alternating current, and Ohm's law. It identifies components of a simple circuit such as power sources, fuses, wires, switches, and loads. Tasks and examples are provided to demonstrate the concepts.
MEMS BASED CZT RADIATION DETECTORS
This document discusses MEMS (Micro Electro-Mechanical Systems) and CZT (Cadmium Zinc Telluride) detectors. It describes MEMS as miniaturized mechanical and electro-mechanical devices made using microfabrication techniques. The components of MEMS include sensors, actuators, microelectronics. Common materials used are silicon, polymers and metals. Basic MEMS fabrication processes include deposition, lithography and etching. CZT detectors directly convert x-ray and gamma-ray photons into electrons at room temperature and are used in medical, security and industrial applications to detect radiation.
Css3
El documento discute las ventajas de no requerir que una página web se vea exactamente igual en todos los navegadores. Esto permite un desarrollo más rápido y experiencias de usuario más ligeras, aunque la página debe verse bien en todos los navegadores. CSS 3 ayuda a mejorar la compatibilidad al agregar nuevas características como sombras, colores, bordes y selectores.
Ur-Energy July 2013 Corporate Presentation
- Ur-Energy is an advanced uranium exploration and development company with its fully licensed and constructed Lost Creek project in Wyoming set to begin production in Q3 2013.
- The company has secured long-term uranium sales contracts and is fully funded to begin production at Lost Creek.
- Ur-Energy also has a definitive agreement to acquire Pathfinder Mines Corporation which holds additional uranium resources in Wyoming that will provide future production centers for the company.
J-Day Kraków: Listen to the sounds of your application
This document discusses monitoring application performance and logs. It introduces the Graphite tool for collecting and visualizing metrics. Logstash is presented as a tool for collecting logs from various sources, parsing them, and outputting to destinations like Elasticsearch. Kibana is shown to provide a web interface for visualizing and querying logs stored in Elasticsearch. The document provides examples of using these tools to monitor application usage patterns, detect anomalies, and troubleshoot issues.
More Related Content
What's hot
AUTOMATIC STREET LIGHT PRESENTATION
This document describes an automatic street light system that uses an LDR (light dependent resistor) and transistor to automatically turn street lights on at night. The main components are an LDR, transistor, resistor, LED, and battery. The LDR detects low light levels and sends a signal to the transistor to turn on the LED light. This system saves energy by only powering the lights when it is dark. Potential applications include street lighting and domestic lighting to reduce electricity waste.
Applications that uses semiconductors
Express Technologies is one of the Top Electronic Components Distributors
that brings exclusive range of electronic components like transistors, rabbit semiconductor microcontrollers, relays and more in one location.
Electrical Earthing Systems
1) The document discusses the importance of electrical earthing in industries for safety against hazards like electrocutions and fires.
2) It notes that the technology for earthing has changed from the traditional PIT type using charcoal and salt to modern chemical earthing, which is widely used and accepted.
3) The company specializes in chemical earthing electrodes with advantages like increased capacity to withstand stresses and a wide range of options to suit different load and fault capacity requirements.
Purchase your Cable Jointing Kits from Compaq International (P) Limited
Compaq has been in existence since 1997.It is concerned with producing a range of cable accessories that are capable of handling overvoltage, strikes and power surges.
POWER ELECTRONICS BASIC COMPONENTS INTRODUCTION PART 1
Power electronics is a branch of electronics engineering that deals with high voltages and currents. It involves components that can handle voltages in the hundreds or thousands and currents in the hundreds of amps. Power electronics converters include rectifiers to convert AC to DC, inverters to convert DC to AC for solar power, choppers to vary DC voltage, and cycloconverters to change AC frequency. Common power electronic devices are DIACs, TRIACs, SCRs, GTOs, UJTs, PUTs, LASCRs, power diodes, PNPN diodes, BJTs, power MOSFETs, and IGBTs.
RUGGEDCOM RP100 Ethernet injectors
The Siemens Ruggedcom RP100 is a single-port Power-over-Ethernet injector that provides power and data over standard Cat5 cable. It is compatible with both 802.3at and 802.3af PoE standards. The RP100 is designed for reliability in harsh industrial and electrical environments with a wide operating temperature range of -40°C to +85°C. It can be used to power devices for SCADA and other industrial applications.
costing of domestic and industrial wiring
This document discusses various topics related to electrical wiring estimation and costing for domestic and industrial wiring projects. It covers types of wiring, selection of wiring types, importance of layout planning, sub-circuiting, looping, standard wire sizes, testing procedures before commissioning wiring, and provides examples of procedures for estimating wiring costs for domestic and industrial projects. The document is intended to provide an overview and guidance on planning, estimating, and testing electrical wiring installations.
Microcontroller based mho relay for distance protection
You haven't seen this type of ppt
this is by
Mohan K M
Ganesh C
Yerriswamy A
from PESIT Bangalore
Oc ppt
This document discusses semiconductor lasers for optical communication. It was developed in 1962 by Robert Hall and consists of complex multi-layer structures. Semiconductor lasers have advantages like small size, low cost, simple construction and high efficiency. However, they also have disadvantages such as relatively low power production and high sensitivity to temperature. Semiconductor lasers find applications in optical communication using fiber optic cables for high-speed data transmission, as well as in medical treatments and as transmitters of digital data.
Electrical layout of
The document provides specifications for the electrical systems in a radiology room, including:
1) Raceway systems will be installed to route wiring for radiology equipment, with floor, wall, and ceiling troughs.
2) Wiring will include high voltage cables for equipment, and grounding conductors.
3) Installation will require coordinating with equipment layout and shielding, and certifications will be provided upon completion.
1.3 wiring accessories
This document discusses and classifies various electrical wiring accessories. It describes controlling accessories like switches, mounting accessories like holders used to mount fixtures, safety accessories like circuit breakers and fuses, and general accessories like connectors, ceiling roses and plug sockets. These accessories are important components used in home and building wiring systems to control and distribute electricity safely.
Design and analysis of ultra low power vlsi circuit in sub and near threshold...
In this project, the EKV model of MOSFET is used as standard. The power consumption of near-threshold CMOS logic CLA and Fredkin gate structures in the sub-threshold region is calculated for a 22nm MOSFET and a comparative analysis of the power consumption and voltage swing is also presented. The analysis is based on the result of the simulation and the modeling of the respective structures. Also, voltage swings have been calculated on various kinds of inputs. And finally the resulting noise margin is calculated in the aforesaid sub-threshold condition.
Solid-State Power Controllers Advantages over Relays and Breakers
Solid-state power controllers (SSPCs) provide advantages over relays and circuit breakers including being more accurate in measurements, offering faster short circuit and overload protection, and greater reliability as they are not subject to erosion or oxidation issues. SSPCs also save weight and volume, come in multiple mounting styles to work with AC or DC power, and can enhance system availability while lowering power dissipation and providing higher power volumes.
Resume
Satyanarayana Nandigam is an electrical engineer with over 6 years of experience in electrical system design for power generation, transmission, and distribution projects. He has expertise in preparing single line diagrams, specifications, layout drawings, and performing calculations for cable sizing, voltage drop, short circuit analysis, and more. Some of the key projects he has worked on include thermal power plants in Maharashtra, West Bengal, Chhattisgarh, and Andhra Pradesh as well as industrial facilities in Indonesia and India.
Grounding and techniques
Grounding electrical systems properly protects people and equipment from faults, lightning strikes, and static discharge by providing a path to dissipate stray energy safely into the earth. Different grounding methods like single stakes, ground rods, plates, and meshes can be used depending on the site conditions and equipment. Proper testing of soil resistivity and ground resistance is important to select the suitable grounding type and ensure effectiveness of the system.
Relays classificatiion according to technology and design basics
Relays have evolved from electromechanical to static, digital, and now numerical relays. Electromechanical relays used mechanical components controlled by electric current and were the earliest form. Static relays replaced mechanical components with analog electronics. Digital relays then replaced analog components with microprocessors. Numerical relays use digital signal processors for faster processing. Relays can also be classified by function, such as protective, monitoring, reclosing, regulating, and synchronizing relays.
Fiber Optic Communication
This document discusses attenuators, optical fiber connectors, and their types. It begins by defining an attenuator as an electronic device that reduces signal power without distortion. It then describes the main types of attenuators and why optical fiber connectors are required to join fibers where connections are needed. The document classifies and describes common connector types like SC, ST, FC, LC, and MT-RJ. It lists features of good connector design and references additional resources on the topics.
Css q3 week2
This document provides information about terminating and connecting electrical wiring and electronic circuits. It begins with learning objectives for the lesson, which are to plan and prepare wiring/circuits for termination and connection, perform the terminations and connections, and test the terminated and connected wiring/circuits. It then lists objectives for students to select proper tools, prepare wiring/circuits correctly according to instructions, and follow safety procedures. The document continues with explanations of electrical theory, including direct current, alternating current, and Ohm's law. It identifies components of a simple circuit such as power sources, fuses, wires, switches, and loads. Tasks and examples are provided to demonstrate the concepts.
MEMS BASED CZT RADIATION DETECTORS
This document discusses MEMS (Micro Electro-Mechanical Systems) and CZT (Cadmium Zinc Telluride) detectors. It describes MEMS as miniaturized mechanical and electro-mechanical devices made using microfabrication techniques. The components of MEMS include sensors, actuators, microelectronics. Common materials used are silicon, polymers and metals. Basic MEMS fabrication processes include deposition, lithography and etching. CZT detectors directly convert x-ray and gamma-ray photons into electrons at room temperature and are used in medical, security and industrial applications to detect radiation.
What's hot (19)
Purchase your Cable Jointing Kits from Compaq International (P) Limited
Purchase your Cable Jointing Kits from Compaq International (P) Limited
POWER ELECTRONICS BASIC COMPONENTS INTRODUCTION PART 1
POWER ELECTRONICS BASIC COMPONENTS INTRODUCTION PART 1
Microcontroller based mho relay for distance protection
Microcontroller based mho relay for distance protection
Design and analysis of ultra low power vlsi circuit in sub and near threshold...
Design and analysis of ultra low power vlsi circuit in sub and near threshold...
Solid-State Power Controllers Advantages over Relays and Breakers
Solid-State Power Controllers Advantages over Relays and Breakers
Relays classificatiion according to technology and design basics
Relays classificatiion according to technology and design basics
Viewers also liked
Css3
El documento discute las ventajas de no requerir que una página web se vea exactamente igual en todos los navegadores. Esto permite un desarrollo más rápido y experiencias de usuario más ligeras, aunque la página debe verse bien en todos los navegadores. CSS 3 ayuda a mejorar la compatibilidad al agregar nuevas características como sombras, colores, bordes y selectores.
Ur-Energy July 2013 Corporate Presentation
- Ur-Energy is an advanced uranium exploration and development company with its fully licensed and constructed Lost Creek project in Wyoming set to begin production in Q3 2013.
- The company has secured long-term uranium sales contracts and is fully funded to begin production at Lost Creek.
- Ur-Energy also has a definitive agreement to acquire Pathfinder Mines Corporation which holds additional uranium resources in Wyoming that will provide future production centers for the company.
J-Day Kraków: Listen to the sounds of your application
This document discusses monitoring application performance and logs. It introduces the Graphite tool for collecting and visualizing metrics. Logstash is presented as a tool for collecting logs from various sources, parsing them, and outputting to destinations like Elasticsearch. Kibana is shown to provide a web interface for visualizing and querying logs stored in Elasticsearch. The document provides examples of using these tools to monitor application usage patterns, detect anomalies, and troubleshoot issues.
Kessef
Kessef is a financial lending company created after the 2008 credit crisis to provide qualified borrowers access to credit. Kessef formed a $150 million investment fund for residential mortgages and researched lending programs to allow the highest number of applicants to qualify. Kessef developed a system to close and fund loans within 10 days, and today 85% of applicants qualify for financing through Kessef with a closing in as little as 10 days.
September 2012 Corporate Presentation
This document provides an overview of Ur-Energy, an advanced pre-production junior mining company focused on developing low-cost uranium production properties in the United States. Key points include that Ur-Energy owns the Lost Creek uranium project in Wyoming, which is shovel-ready and awaiting final permitting to commence construction and begin production in mid-2013. The company also aims to grow resources through acquisitions and exploration on its existing land packages.
Orden Arquitectonico Q3
El documento presenta un análisis del contexto urbano del barrio Balmaceda en Santiago y oportunidades de proyecto. Se describen hitos cercanos como el Centro Cultural La Perrera y proyectos del plan de renovación urbana del Anillo Interior como el subcentro Yungay. Se identifican áreas verdes, comerciales, de tránsito y residenciales, así como oportunidades como mejorar espacios públicos e integrar el barrio con el Parque de los Reyes. La propuesta busca recuperar la identidad del b
ACH 121 Lecture 13 (Special Construction)
The document summarizes different types of conveying systems used in construction including stairs, ladders, elevators, escalators and moving walks. It describes the purpose and function of each system, and provides details on common stair types like straight, quarter-turn, half-turn, winding, circular and spiral stairs. Ladders are used primarily for industrial, utility and service areas while elevators, escalators and moving walks transport people between floors more efficiently.
Folleto Moratto Mar 2010
Este documento lista diferentes medios de comunicación y sitios web para publicitar franquicias, incluyendo Mercado.com, Gastrofranchising, Mundohelado.com, Webretail y Franquiciasarg.com. También menciona la Revista Pymes de Clarín. Luego proporciona la dirección y número de teléfono de cuatro sucursales de una empresa llamada Moratto en los barrios de Belgrano, Barrio Norte, Caballito y Palermo en Buenos Aires, Argentina.
June 2012 Ur-Energy Corporate Presentation
Ur-Energy is an advanced pre-production junior mining company focused on developing its low-cost Lost Creek uranium project in Wyoming. It has one remaining regulatory approval needed to commence construction this summer and achieve its goal of low-cost uranium production. The company has expanded its resources through acquisitions and exploration and secured future revenue through sales agreements.
Lateral Filing
The following presentation was at the request of a group on linkedin. If you have any questions please reach out to alibia.devente@gmail.com. The previous presentation was deleted based on a typo. Sorry for any challenge it may have caused.
Itec 214
The document discusses and provides examples of different types of tree structures that can be used to represent hierarchical data, including classical node-link diagrams, nested sets, layered "icicle" diagrams, outlines and tree views, and nested parentheses. It lists the names Salvador & Ana, Annalyn, Charlene, and Jason in examples of each structure type.
Presentazione del Master in "Scrittura, Traduzione e Comunicazione nelle pro...
Il Master è progettato per rispondere al divario tra le domande di lavoro qualificato del settore dei media e l’offerta di giovani neolaureati, nonché alle esigenze di aggiornamento professionale di coloro che già a vario titolo lavorano nel settore comunicativo o in ambiti affini.
Obiettivi: Il Master si propone di formare esperti nel campo della traduzione e dell’adattamento in ambito televisivo e cinematografico, oltre che esperti della comunicazione in rete.
Contenuti: Nella parte istituzionale vengono fornite le basi teoriche e pratiche per scrivere e tradurre nei media tradizionali. Vengono offerti gli strumenti necessari per comprendere, gestire e prevedere le dinamiche di sviluppo delle forme di oralità e scrittura per il cinema e la televisione, per scrivere sceneggiature e adattare dialoghi.
Nella parte monografica dedicata al Web si sviluppano le competenze testuali e multimodali necessarie per l’ideazione e la realizzazione di eventi comunicativi che caratterizzano le interazioni in rete (siti personali e aziendali, blog, forum, chat, per fini di interazione istituzionale e personale), mentre in quella dedicata all’adattamento si affinano le competenze traduttive e di costruzione dei dialoghi specifiche dell’ambito cinematografico e televisivo.
L’organizzazione del Master si avvale di rapporti con aziende e istituzioni del settore, che collaborano alla didattica e alle esperienze di stage.
Metodologia: Il Master prevede una didattica mista, in parte in presenza (lezioni in aula) e in parte a distanza, tramite l’utilizzo di materiali telematici specificamente predisposti
Destinatari: Il Master è riservato a laureati di primo o secondo livello, di vecchio o nuovo ordinamento, in Lettere e Filosofia, DAMS, Lingue, Storia, Scienze della Comunicazione, Scienze della Formazione, Sociologia, Economia, Scienze politiche, Giurisprudenza, Beni culturali, Mediazione linguistica. Possono accedere al Master candidati sia italiani sia stranieri, purché in possesso di una comprovata conoscenza della lingua italiana. I candidati devono certificare o autocertificare la propria conoscenza dell’inglese di livello B1, secondo il Quadro Comune Europeo di Riferimento per le Lingue.
Durata: Il Master prevede un numero di ore complessivamente non inferiore a 800, incluso un periodo di tirocinio, per un totale di 60 crediti. Il Master ha una durata di dieci mesi (da gennaio a novembre).
Domande di ammissione entro il 01/11/2011
Iscrizioni entro il 07/12/2011
Referenti
Prof. ssa Franca Orletti (direttrice del Master) orletti@uniroma3.it
Dott.ssa Annarita Guidi (segreteria) info-master@lionline.it
Segreteria del Master:
Dipartimento di Linguistica
Via Ostiense 236 – 00146 Roma
tel. + 39 0657338343; fax + 39 0657338344
dipling@uniroma3.it
Ur-Energy October 12, 2012 Webcast Presentation
Ur-Energy is an advanced pre-production junior mining company focused on developing its flagship Lost Creek uranium project in Wyoming, which has received final regulatory approval and will begin construction this month with first production expected in mid-2013, as well as expanding its resources through exploration and acquisition including the recently announced purchase of Pathfinder Mines Corporation.
Q3
El documento presenta un análisis del contexto urbano del barrio Balmaceda en Santiago y oportunidades de proyecto. Se describen hitos cercanos como el Centro Cultural La Perrera y proyectos del plan de renovación urbana del anillo interior de Santiago. Se identifican áreas del barrio con usos barriales, comerciales e industriales y límites como el río Mapocho. La propuesta busca recuperar la identidad barrial, mejorar espacios públicos e integrar el barrio con el parque a través
2011 11 DCU keynote- changing landscape of social media
The document discusses how social media is changing the landscape of information sharing and crowd sourcing. It notes that information now spreads much faster on social media, with news spreading on Twitter in under 60 seconds and key insights spreading to millions of users very quickly. The document also discusses how companies are now able to crowd source ideas, donations, inventions, simple tasks and marketing from large groups of people through social media. This allows them to get faster answers and insights from larger datasets than was possible before through traditional focus groups and research methods.
ACH 216 Lecture 09 (Issues During Project)
This document discusses various issues that can arise during the construction process and how they are managed. It covers topics like time extensions, change orders, changed site conditions, delays, liquidated damages, and progress reporting. Management of issues during construction is key to a successful project outcome. Regular reporting through meetings, photos, and logs helps document progress and address any problems in a timely manner.
Zamchick Presentation Tech
The document summarizes the capabilities of Zamchick Group in rapid visualization and experience design. It discusses how Zamchick Group uses drawings and visualizations to bridge the gap between research and application development. It then lists 9 ways visualization is used, such as translating data into meaningful insights, combining concepts to generate new ideas, and supporting the design process from discovery to product development. Client testimonials praise Zamchick Group's ability to accelerate R&D efforts and push innovative design ideas.
Presentación Loni Stark, Director of Product & Industry Marketing, Adobe
The document discusses how businesses can build their digital brand in today's environment where attention is scarce and content is exploding. It emphasizes the importance of being useful, different, and convenient. Examples are provided of companies that have successfully built their digital brand by personalizing the customer experience, extending their physical products with social experiences, and making experiences convenient across multiple devices. The document concludes by discussing how companies can connect customer knowledge with digital experiences to quickly learn what resonates and drive engagement, acquisition, and loyalty.
Viewers also liked (20)
J-Day Kraków: Listen to the sounds of your application
J-Day Kraków: Listen to the sounds of your application
Presentazione del Master in "Scrittura, Traduzione e Comunicazione nelle pro...
Presentazione del Master in "Scrittura, Traduzione e Comunicazione nelle pro...
2011 11 DCU keynote- changing landscape of social media
2011 11 DCU keynote- changing landscape of social media
Presentación Loni Stark, Director of Product & Industry Marketing, Adobe
Presentación Loni Stark, Director of Product & Industry Marketing, Adobe
More from Alibia de Vente
2016 Traxx Checklist
This checklist provides an overview for reviewing a Traxx specification. It includes items to check such as finishes and pricing, fabric approval, panel restrictions, service parts listing, Traxx length matching the space, additional trim or splice plates if tiles are cut, load bearing requirements, fastener type, end trims, trim caps if matching with Cetra, tile type for matching walls, additional trim channels for marker board tiles, end trim type for exposed ends, and presentation/work tools. It also includes checking height tiles will be hung, COM yardage, and railroaded fabric for Xsite.
2016 Traxx Presentation
This document provides details on Traxx and Tiles, including conference call information, product pages, applications, mounting options, and Kimball Office contact resources. It outlines Traxx and Tiles tile heights, details, fastener options, and applications when used with other Kimball products like Cetra and Interworks EQ. Contact information is provided for Kimball sales, customer care, and technical support teams.
Neo con e tool overview
In meeting with dealers across the country I am always curious about the software programs they use and why. Often I am asked who is out there and what programs other dealers use. To solve or help with that question I am posting a compilation of what I saw in the industry in hopes that it will help better explain what to use vs. what is out there. The results still stand that 2020 Technologies by far has the most number of catalogs available for any one dealer. If you have any questions about the content please feel free to reach out alibia.devente@kimball.com
2012 Traxx Specification Presentation
This document provides an overview of the Traxx & Tiles system from Kimball Office. It includes instructions for joining a conference call, followed by details on how the Traxx system attaches to walls and maximizes space. Diagrams show applications of Traxx with other Kimball products like Cetra and Interworks EQ. Contact information is provided for Kimball Office dealer sales managers, customer care, product support and the regional product specifier Alibia de Vente.
2012 Hum Specification Presentation
Attached is the revised 2012 presentation for Hum specification training. If you have any questions about this presentation feel free to reach out to alibia.devente@gmail.com
Electrical and Panel Systems
This presenation details electrical for use in panel systems. If you have any questions about this pesentation please reach out to alibia.devente@gmail.com
Brackets
This presentation is a first attempt at making brackets with systems easier to understand. I may be revising after suggestions and typos etc. If you have any comments regarding this presentation please reach out with questions to alibia.devente@gmail.com
2010 Hum
This is a brief on transistional casegoods. If you have any questions please feel free to contact alibia.devente@gmail.com
2010 Traditional Casegoods Specification
This is a brief on transistional casegoods. If you have any questions please feel free to contact alibia.devente@gmail.com
2010 Contemporary Casegoods Specification
This is a brief on contemporary casegoods. If you have any questions please feel free to contact alibia.devente@gmail.com
2010 Transitional Casegoods Specification
This is a brief on transistional casegoods. If you have any questions please feel free to contact alibia.devente@gmail.com
2010 Xsite Checklist
This PDF document covers the most common mistakes on Xsite. If you have ay questions on this document please reach out to alibia.devente@gmail.com
2010 Xsite
This presentation is used for explaining the specificaiton and application information for Xsite. If you have any questions regarding this presentation please contact alibia.devente@gmail.com
2010 Xsite Checklist
This Word document covers the most common mistakes on Xsite. You can customize this document to apply specifically to your project by adding or deleting what you do not need. If you have ay questions on this document please reach out to alibia.devente@gmail.com
2010 Xsite Checklist (.doc)
This is a .doc version of the Xsite checklist that you can use in making sure all your project details are in tact. Feel free to customize for individual projects. If you have any questions please reach out to alibia.devente@gmail.com
2008 Electrical & Data
This is a 2008 presentation on electrical with Kimball Office products. If you have any questions regarding the content reach out to alibia.devente@gmail.com
Traxx Checklist (word)
This file is the word version of the Traxx checklist. When downloaded you can cutomize based on job. If you have any questions regarding this document please reach out to alibia.devente@gmail.com
2010 Traxx
This is the 2010 presentation for Traxx. This is my favoriete product as I even have it in my home. You may recognize the product from other concepts from various retailers. If you have any questions on this presentation please contact alibia.devente@gmail.com
2010 Interworks EQ
This is a copy of the 2010 presentation on Interworks EQ that I do for P201, P103 and P201-I. At the end of this presentation you will find a video covering the basics of specification on YouTube. If you have any questions regarding the content of this document please reach out to alibia.devente@gmail.com
Xsite Checklist
Attached is the Xsite checklist for confirming your specifications before placing an order. This document is in Word which will allow you to costomize based on need of project. I suggest adding items based on the exact specifications. If you have any questions regarding this document please reach out to alibia.devente@gmail.com.
More from Alibia de Vente (20)
Recently uploaded
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Recently uploaded (20)
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
2007 Electrical Regions
- 1. Power and Data inside systems furniture
- 2. INTERWORKS Power Distribution Overview
- 3. INTERWORKS Power Distribution Overview
- 4. INTERWORKS Wireway Cover Installation
- 5. INTERWORKS Power Assembly Distribution Installation
- 9. INTERWORKS Jumper Cables Mid-Wireway
- 10. INTERWORKS Standard floor Wall/ Column Application
- 11. INTERWORKS Standard floor Wall/ Column Application
- 12. INTERWORKS Standard Ceiling Application
- 13. INTERWORKS Electrical Planning Guidelines
- 14. INTERWORKS 8-wire, 3 & 1 Configuration
- 15. INTERWORKS Electrical Circuit Configuration Options
- 16. INTERWORKS Electrical Circuit Configuration Options