this is an essential originally power point created notes in section view of engineering graphics and drawing hope you enjoy this and take its benefits....
this is an essential originally power point created notes in section view of engineering graphics and drawing hope you enjoy this and take its benefits....
Thread fastener, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
check it out: http://goo.gl/vqNk7m
CADmantra Technologies pvt. Ltd. is a CAD Training institute specilized in producing quality and high standard education and training. We are providing a perfact institute for the students intersted in CAD courses CADmantra is established by a group of engineers to devlop good training system in the field of CAD/CAM/CAE, these courses are widely accepted worldwide.
#catiatraining
#ANSYS #CRE-O
#hypermesh
#Automobileworkshops
#enginedevelopment
#autocad
#sketching
Standard convention using SP – 46 (1988)-Materials C.I., M.S, Brass, Bronze, Aluminum, wood, Glass, Concrete and Rubber-Long and short break in pipe, rod and shaft.- Various sections- Half, removed,-Standard convention of Knurling, splined shafts, and chain wheels-Springs with square and flat ends, Gears, sprocket wheel-Countersunk &counter bore
UNTII: THREADED FASTENERS 12Hrs
Screw thread terminology-Conventional representation of External threads and internal threads-Draw the top and front view of hexagonal headed bolt with nut across flat and corner-Draw -square headed bolt across corner and flat-cylindrical headed bolt-Eye bolt-Locking devices-Draw the views of for standard dimensions-lock nut-castle nut-Studs-Tap bolt-Machine screws-washers-Keys-sunk key-Gib head key.(For a given standard diameter with proportions)
UNITIII: RIVETED JOINTS 12Hrs
Rivets-types-Types of riveted joints-Draw the sectional front view and top view of-single riveted lap joint, double riveted lap joint with chain riveting and zigzag riveting. Draw the sectional front view and top view of-single riveted butt joint with single and double cover plate - double riveted butt joint with chain riveting and zigzag riveting with double cover plate.
UNIT IV:LIMITS, FITS AND TOLERANCES 06Hrs
Concept of limits, fits & allowances--Introduction to ISO system of tolerance,-dimensional tolerances-Draw the working drawing plain step turned shaft of varying diameter, indicate the dimensional tolerances
UNIT V: PRODUCTION DRAWINGS 06Hr
Surface roughness-Indication of machining-symbol showing direction of lay, roughness grades, machining allowances, Machining symbols used in industry
(Suggested Practice:Disassembling of any Physical model having not less than five parts, sketch the minimum views required for each component, measure all the required dimensions of each component.)
UNIT VI: DETAILS TO ASSEMBLY 38Hrs
Introduction to the unit assembly drawing, steps involved in preparing assembly drawing from Details-Sequence in assembly-Preparation of details and Assembly of parts with Sectional views of- Socket and Spigot joint Cotter Joint-- Knuckle joint- Protected Flanged coupling- Universal coupling-Plummer Block and Screw Jack (Front, side and top views)
1. Introduction of Machine drawing
2. Machine Drawing convections
3. Drawing of machine elements and
4. Simple parts, popular screw threads
5. Assembly Drawings
Thread fastener, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
check it out: http://goo.gl/vqNk7m
CADmantra Technologies pvt. Ltd. is a CAD Training institute specilized in producing quality and high standard education and training. We are providing a perfact institute for the students intersted in CAD courses CADmantra is established by a group of engineers to devlop good training system in the field of CAD/CAM/CAE, these courses are widely accepted worldwide.
#catiatraining
#ANSYS #CRE-O
#hypermesh
#Automobileworkshops
#enginedevelopment
#autocad
#sketching
Standard convention using SP – 46 (1988)-Materials C.I., M.S, Brass, Bronze, Aluminum, wood, Glass, Concrete and Rubber-Long and short break in pipe, rod and shaft.- Various sections- Half, removed,-Standard convention of Knurling, splined shafts, and chain wheels-Springs with square and flat ends, Gears, sprocket wheel-Countersunk &counter bore
UNTII: THREADED FASTENERS 12Hrs
Screw thread terminology-Conventional representation of External threads and internal threads-Draw the top and front view of hexagonal headed bolt with nut across flat and corner-Draw -square headed bolt across corner and flat-cylindrical headed bolt-Eye bolt-Locking devices-Draw the views of for standard dimensions-lock nut-castle nut-Studs-Tap bolt-Machine screws-washers-Keys-sunk key-Gib head key.(For a given standard diameter with proportions)
UNITIII: RIVETED JOINTS 12Hrs
Rivets-types-Types of riveted joints-Draw the sectional front view and top view of-single riveted lap joint, double riveted lap joint with chain riveting and zigzag riveting. Draw the sectional front view and top view of-single riveted butt joint with single and double cover plate - double riveted butt joint with chain riveting and zigzag riveting with double cover plate.
UNIT IV:LIMITS, FITS AND TOLERANCES 06Hrs
Concept of limits, fits & allowances--Introduction to ISO system of tolerance,-dimensional tolerances-Draw the working drawing plain step turned shaft of varying diameter, indicate the dimensional tolerances
UNIT V: PRODUCTION DRAWINGS 06Hr
Surface roughness-Indication of machining-symbol showing direction of lay, roughness grades, machining allowances, Machining symbols used in industry
(Suggested Practice:Disassembling of any Physical model having not less than five parts, sketch the minimum views required for each component, measure all the required dimensions of each component.)
UNIT VI: DETAILS TO ASSEMBLY 38Hrs
Introduction to the unit assembly drawing, steps involved in preparing assembly drawing from Details-Sequence in assembly-Preparation of details and Assembly of parts with Sectional views of- Socket and Spigot joint Cotter Joint-- Knuckle joint- Protected Flanged coupling- Universal coupling-Plummer Block and Screw Jack (Front, side and top views)
1. Introduction of Machine drawing
2. Machine Drawing convections
3. Drawing of machine elements and
4. Simple parts, popular screw threads
5. Assembly Drawings
civil engineering drawings introduction for beginners.
based on university of Calicut syllabus. Basic introduction. helpful tips in the drawings.
(If any copyrighted materials have been inadvertently used in this work without proper credit being given in one form or another, please notify)
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
16. DEFINITION Aligned section is a section view that is drawn by imaginary rotating the object’s features appeared in a principal view about symmetry axis
17. Example : Hole Gives the impression that this holes are at unsymmetrical position.
24. CONVENTIONAL PRACTICE For long objects that have to draw in a small scale to fit them on the paper, it is recommended to remove its long portion (which contains no important information) and draw the break lines at the broken ends.
