2. Process
The process of my product starts
with planning the radio show,
trying to figure out what you're
going to talk about. Then comes
the recording my audio, it was
quite difficult to just sit there and
start a conversation but once we
got into the flow of chatting I ran
smoothly.
Once we had finished recording I
then uploaded all the pieces of
audio to my memory stick.
3. Process
I opened an audition file and pieced all the pieces of audio together to
make a smooth radio show.
I used the razor select tool to cut out any long pauses, inappropriate or
unusable audio, I also used a cross fade to blend audio together and
make in run smoothly with out and jumps, another tool I used was the
amplitude adjuster to make all the pieces of audio loud enough and to
turn down the music.
4. Process
On my audition file there are two options you
could use when editing your audio for example;
• You could use the Multitrack option to edit
your audio so you can see all of your pieces of
audio. You can use the razor select tool to cut
sections of the audio out to make it another
individual section of audio. You can use the
time selection tool to delete bits audio.
• You could also use the Waveform to edit
individual bits of audio by themselves. You
can use both the razor select tool and the
time selection tool to move or delete sections
on audio. You can also use the amplitude
adjuster tool to change the volume of an
individual piece of audio.
5. On the multi track I used 3 songs which were scattered
from the beginning, middle and end. I introduce
Editor's Notes
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.
Discuss the tools and processes used in your production. Log your thoughts and feelings about your work.